Gotowa bibliografia na temat „Hard superalloys”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Hard superalloys”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Hard superalloys"
Kursuncu, Bilal, Halil Caliskan, Sevki Yilmaz Guven i Peter Panjan. "Wear Behavior of Multilayer Nanocomposite TiAlSiN/TiSiN/TiAlN Coated Carbide Cutting Tool during Face Milling of Inconel 718 Superalloy". Journal of Nano Research 47 (maj 2017): 11–16. http://dx.doi.org/10.4028/www.scientific.net/jnanor.47.11.
Pełny tekst źródłaPan, Lei, ZR Wu, Lei Fang i YD Song. "Investigation of surface damage and roughness for nickel-based superalloy GH4169 under hard turning processing". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234, nr 4 (16.11.2019): 679–91. http://dx.doi.org/10.1177/0954405419885789.
Pełny tekst źródłaPrasad, Ganesha, Raghavendra Kamath C. i Vijay G.S. "A review on conventional and nonconventional machining of Nickel-based Nimonic superalloy". Manufacturing Review 10 (2023): 10. http://dx.doi.org/10.1051/mfreview/2023009.
Pełny tekst źródłaZahedi, Ali, i J. Akbari. "FEM Analysis of Single Grit Chip Formation in Creep-Feed Grinding of Inconel 718 Superalloy". Advanced Materials Research 325 (sierpień 2011): 128–33. http://dx.doi.org/10.4028/www.scientific.net/amr.325.128.
Pełny tekst źródłaDíaz-Álvarez, José, Antonio Díaz-Álvarez, Henar Miguélez i José Cantero. "Finishing Turning of Ni Superalloy Haynes 282". Metals 8, nr 10 (18.10.2018): 843. http://dx.doi.org/10.3390/met8100843.
Pełny tekst źródłaMukhtarov, Shamil, Artem Ganeev, Marsel Nagimov, Ruslan Shakhov, Vener Valitov i Farid Utyashev. "Manufacturing of Axisymmetric Components out of Superalloys and Hard-to-Deform Steels by Roll Forming". Key Engineering Materials 746 (lipiec 2017): 69–74. http://dx.doi.org/10.4028/www.scientific.net/kem.746.69.
Pełny tekst źródłaALTIN, Abdullah. "Determination of Cutting Tool Performance Characteristics in Machining Nickel Based Super Alloys". International Conference on Applied Engineering and Natural Sciences 1, nr 1 (20.07.2023): 416–20. http://dx.doi.org/10.59287/icaens.1031.
Pełny tekst źródłaJean, Ming-Der, Shu-Yi Tu i Jen-Ting Wang. "Analysis of Hard-Facing Appearance of Specific Powdered Superalloys for PTA-Coating Processes". Journal of Materials Engineering and Performance 14, nr 3 (1.06.2005): 307–14. http://dx.doi.org/10.1361/10599490523904.
Pełny tekst źródłaDíaz-Álvarez, Antonio, José Díaz-Álvarez, José Luis Cantero i Henar Miguélez. "Sustainable High-Speed Finishing Turning of Haynes 282 Using Carbide Tools in Dry Conditions". Metals 9, nr 9 (6.09.2019): 989. http://dx.doi.org/10.3390/met9090989.
Pełny tekst źródłaLi, Yuebing, Yanming He, Chuanyang Lu, Wenjian Zheng, Jianguo Yang, Donghong Wang, Limei Wang, Yuan Sun i Zengliang Gao. "Microstructural Evolution and Mechanical Evaluation of a Laser-Induced Composite Coating on a Ni-Based Superalloy during Thermal Exposure". Materials 12, nr 9 (3.05.2019): 1439. http://dx.doi.org/10.3390/ma12091439.
Pełny tekst źródłaRozprawy doktorskie na temat "Hard superalloys"
Karamched, Phani Shashanka. "Deformation studies near hard particles in a superalloy". Thesis, University of Oxford, 2011. http://ora.ox.ac.uk/objects/uuid:e740592d-8d82-4c12-9bfe-99901d132b60.
Pełny tekst źródłaSIVO, ANTONIO. "On the Laser Powder Bed Fusion based processing route for hard to weld Nickel Superalloys". Doctoral thesis, Politecnico di Torino, 2022. http://hdl.handle.net/11583/2971609.
Pełny tekst źródłaAgode, Kofi Edoh. "Analyse et modélisation du comportement à l’usure des outils de coupe en carbure de tungstène pour différentes teneurs en cobalt lors de l’usinage de l’alliage de titane Ti-6Al-4V". Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0141.
Pełny tekst źródłaDue to their high hardness and wear resistance, cemented carbide (WC-Co) is the main material used to manufacture machining tools and forming tooling, as well as wear parts requiring high hardness and high precision. The modification of tungsten carbide microstructure, and more particularly its cobalt content, is currently attracting the greatest interest from manufacturers to develop new grades tools with high performance, and then expand new markets.This thesis aims to study the effect of the cobalt content of carbide tools on the measured values and wear mechanisms when machining hard superalloys such as the aeronautical titanium alloys Ti-6Al-4V. Both experimental and numerical research work are devoted on one hand to the understanding of the microscopic damage mechanisms leading to the macroscopic wear of the WC-Co composite and on the other hand, to the influence of the cobalt content on the behavior of the WC-Co taking into account the mechanical-microstructure-damage coupling.On the basis of an experimental analysis, the identification of the macroscopic and microscopic physical phenomena involved at the tool/chip and tool/workpiece contact interfaces was conducted. Machining tests were firstly carried out on the tool-material couple WC-Co/Ti-6Al-4V with different cobalt contents for the tools (from 6 to 15%). In a second step, a tribological characterization of the same tool-material couple was carried out to evaluate the influence of the cobalt content and the contact conditions (sliding speed, applied force) on the friction coefficient and wear. However, the inaccessibility of the contact zones during machining and the tribological tests did not allow a complete description of the wear mechanisms observed, whether macroscopic mechanisms (adhesion, abrasion, deformation, ...), or microscopic mechanisms (cracking, damage of the WC and Co phases). The numerical simulation using finite elements (FE) proved to be a very interesting complementary tool for the analysis of these wear mechanisms.Our modeling strategy focused on the response of WC-Co at the microstructure scale for the thermomechanical loading close to that obtained by machining. The proposed model takes into account the behavior of the WC and Co phases separately and that of the interfaces WC-WC and WC-Co of the composite. This strategy allowed to study and identify parameters influencing the behavior of the microstructure from the elastic stage to the damage initiation. A good agreement was obtained between the results of the numerical behavior at the initiation of damage in the microstructure and those of the experimental observations in terms of the effects of the cobalt content in the tungsten carbide and of the applied machining conditions
Części książek na temat "Hard superalloys"
Casteletti, L. C., A. Lombardi Neto, D. T. de Macedo, L. B. Cruvinel i George Totten. "Stellite Superalloy Powder Deposition on 7075 Aluminum Alloy". W Encyclopedia of Aluminum and Its Alloys. Boca Raton: CRC Press, 2019. http://dx.doi.org/10.1201/9781351045636-140000303.
Pełny tekst źródłaHall, Christopher. "5. Making stuff and making things". W Materials: A Very Short Introduction, 83–101. Oxford University Press, 2014. http://dx.doi.org/10.1093/actrade/9780199672677.003.0005.
Pełny tekst źródłaStreszczenia konferencji na temat "Hard superalloys"
Ratay, Jason, i Hitomi Yamaguchi. "Characteristics of Diamond Abrasive Used in Magnetic Abrasive Finishing of Nickel-Based Superalloys". W ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8365.
Pełny tekst źródłaBranagan, D. J., M. C. Marshall, B. E. Meacham, L. F. Aprigliano, R. Bayles, E. J. Lemieux, T. Newbauer i in. "Wear and Corrosion Resistant Amorphous / Nanostructured Steel Coatings For Replacement of Electrolytic Hard Chromium". W ITSC2006, redaktorzy B. R. Marple, M. M. Hyland, Y. C. Lau, R. S. Lima i J. Voyer. ASM International, 2006. http://dx.doi.org/10.31399/asm.cp.itsc2006p0733.
Pełny tekst źródłaRajesh Jha, George Stavo Dulikravich i Marcelo Jose Colaco. "Design and optimization of rare-earth free hard magnetic alloys and Nickel-based superalloys for high temperature applications". W 23rd ABCM International Congress of Mechanical Engineering. Rio de Janeiro, Brazil: ABCM Brazilian Society of Mechanical Sciences and Engineering, 2015. http://dx.doi.org/10.20906/cps/cob-2015-1284.
Pełny tekst źródłaPasupuleti, Thejasree, Manikandan Natarajan, Loganayagan Shanmugam, Jothi Kiruthika, Mude Ramesh Naik i Gowthami Kotapati. "Application of Taguchi Based ANFIS Approach in Wire Electrical Discharge Machining of Inconel 625 for Automobile Applications". W International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2023. http://dx.doi.org/10.4271/2023-28-0148.
Pełny tekst źródłaNatarajan, Manikandan, Thejasree Pasupuleti, Gnana Sagaya Raj, V. Kumar, Lakshmi Narasimhamu Katta i Jothi Kiruthika. "Machinability Studies and the Evolution of Hybrid Artificial Intelligent Tools for Advanced Machining of Nickel Alloy for Aerospace Applications". W International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2023. http://dx.doi.org/10.4271/2023-28-0065.
Pełny tekst źródłaOgata, Takashi, i Takayuki Sakai. "Life Prediction Method of CC and DS Ni Base Superalloys Under High Temperature Biaxial Fatigue Loading". W ASME Turbo Expo 2009: Power for Land, Sea, and Air. ASMEDC, 2009. http://dx.doi.org/10.1115/gt2009-59069.
Pełny tekst źródłaTapphorn, R., H. Gabel, K. Hashimoto i T. Crowe. "Kinetic Metallization of Interior Diameter Bores". W ITSC 2012, redaktorzy R. S. Lima, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, A. McDonald i F. L. Toma. ASM International, 2012. http://dx.doi.org/10.31399/asm.cp.itsc2012p0311.
Pełny tekst źródłaLi, Y. L., C. L. Ma i H. Zhang. "Crystallographic Orientation Evolution in NbSS-Nb5Si3 Eutectic Alloys by EBSD Analyses". W ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-95309.
Pełny tekst źródłaLi, Ji, Rongcan Zhou, Liying Tang, Bohan Wang, Shufang Hou, Jiang Li, Weiguo Liu, Hongyu Liu i Xiaomin Li. "Effect of Aging Heat-Treatment on the Creep Behavior of Inconel 740H Used in 700 °C A-USC Power Plants". W AM-EPRI 2019, redaktorzy J. Shingledecker i M. Takeyama. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.am-epri-2019p0448.
Pełny tekst źródłaPasupuleti, Thejasree, Manikandan Natarajan, V. Kumar, Lakshmi Narasimhamu Katta, Jothi Kiruthika i R. Silambarasan. "Predictive Modelling and Process Parameter Prediction for Monel 400 Wire Electrical Discharge Machining for Rocket Frames". W International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2023. http://dx.doi.org/10.4271/2023-28-0088.
Pełny tekst źródła