Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Green Stool Design Project.
Artykuły w czasopismach na temat „Green Stool Design Project”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Green Stool Design Project”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.
1
Orsi, Alessandro, i Ignacio Guillén Guillamón. "OPTIMIZATION OF GREEN-BUILDING DESIGN PROCESSES - CASE STUDY". MIX Sustentável 2, nr 1 (3.05.2016): 20. http://dx.doi.org/10.29183/2447-3073.mix2016.v2.n1.20-28.
Pełny tekst źródłaStreszczenie:
The development of a green-building project following a specific reference standard such as LEED, brings new conditions and restrains for all subjects involved in the process. Such changes affect technicians, owners, bureaucracy and also the management tasks either during design or construction phases. Within this scope, project management plays a key role for the optimization of the design-project development. This research analyzes the design process of a single case-study project from the project management perspective, taking into consideration all the activities that negatively affected the project design development. The project selected for the scope of the research is a new school complex located in Northern Italy currently pursuing the LEED Gold certification with a project cost of 13,2 million Euros. A new methodology was created in order to analyze the project and evaluate the effects of detected project-management issues under three different points of view: costs, time and building sustainability. Such “issues” were identified by researchers on the basis of the LEAN-definition of “waste”. The scope of the research is to develop and test a methodology for the optimization of the project management processes during the development of a LEED building design in Europe through the detection and evaluation of process wastes. The results showed that project management issues related to green-building tasks affect considerably the cost, schedule and sustainability of the project design and vice versa, the accuracy of the project management tasks affect the sustainability features of the final building design.
2
Wibowo, Mochamad Agung, Naniek Utami Handayani, Nur Farida i Asri Nurdiana. "Developing Indicators of Green Initiation and Green Design of Green Supply Chain Management in Construction Industry". E3S Web of Conferences 115 (2019): 02006. http://dx.doi.org/10.1051/e3sconf/201911502006.
Pełny tekst źródłaStreszczenie:
Project is a set of interrelated activities and requires skills from different professions, and also project is involved the various of stakeholders in each phase of the Project Life Cycle. Implementation of Green Supply Chain in construction projects meant to bring the concept of eco-friendly in every process from the initiation phase, planning phase, the construction phase, and the operation and maintenance phase. It is necessary to identify indicators of green initiation and green design and how to explain the relationship between the role of initiation by the owner and the design process by a design consultant. This study aims to identify the indicators of green initiation and green design concept as part of Green Supply Chain. The method used for this study is a descriptive research that identifies and develop a framework for implementing green initiation and green design in construction industry that consists of concept, dimensions, elements, and indicators. GSCM in construction projects was determined by 9 indicators in the green initiation phase and 40 indicators in the green design phase. The success of green concept in construction project is very determined from these two phases as the beginning of the process, and the most important parties are the owners and design consultants.
3
Sunaryo, Sunaryo, i Dovan Pahalatua. "Green ship recycle yard design". Journal of Naval Architecture and Marine Engineering 12, nr 1 (30.06.2015): 15–20. http://dx.doi.org/10.3329/jname.v12i1.20450.
Pełny tekst źródłaStreszczenie:
The life cycle of a ship has an age limit related to its operation. When the ship economically is not profitable any more, it will be recycled or scrapped. Since the scrapped ship has plenty of hazardous materials, special care should be carried out to manage the wastes in accordance with the national and international available regulations. With regard to this a ship recycle yard that conducts ship breaking and recycle of the ships outfits, machineries, and infrastructure should be well designed in order to comply to all regulations that prevent it from producing harmful and polluting wastes to human and environment. The study was aimed to design an environmentally friendly or green ship recycle yard in Indonesia as a pilot project in anticipation to the booming of old used merchant ships fleet due to the implementation of cabotage principle. The project is located in the Maritime Industrial Cluster in Tanggamus Regency, Lampung Province, Sumatera. The ship recycle yard is designed with a capacity of maximum 30,000 DWT ship to be recycled, and all the activities involve in the yard would comply and refer to the environmental and IMO regulations, to ensure that no harm and hazardous wastes polluting the surrounding land and sea by arranging a proper layout and providing proper facilities and working procedures.
4
Sjøvoll, Vibeke. "The stool that became a tree: Reflecting on a collaborative student project in design education". International Journal of Education Through Art 18, nr 3 (1.09.2022): 377–93. http://dx.doi.org/10.1386/eta_00107_1.
Pełny tekst źródłaStreszczenie:
Which possibilities are there for cultivating critical, creative, artistic and ethical thinking in collaboration with a major corporation in a student project? The project explored in this article involved first-year students enrolled in a BA product design course at the Oslo Metropolitan University. The research approach combined methods such as practice-led research with students, photo-elicitation interviews, autoethnographic writing and reflections. The article attends to potentials and failures in critical, creative and artistic practices that aim to challenge problematic modes of production in society today. The project initially set out to explore critical modes of creativity and making practices that are different from commercial design. However, the same project was embraced by Ikea, who both sponsored it and exhibited the final results. This embrace may have the effect of zeroing out, countering or incorporating attempts to be critical towards commercial design.
5
Potter, Stephen. "Managing the Design of An Innovative Green Transport Project". Design Journal 2, nr 3 (listopad 1999): 51–61. http://dx.doi.org/10.2752/146069299790225360.
Pełny tekst źródła
6
Bilec, Melissa, i Robert Ries. "Preliminary Study of Green Design and Project Delivery Methods in the Public Sector". Journal of Green Building 2, nr 2 (1.05.2007): 151–60. http://dx.doi.org/10.3992/jgb.2.2.151.
Pełny tekst źródłaStreszczenie:
The selection of the project delivery method (PDM) for any project is critical—it establishes the communication, coordination, and contractual interfaces between the owner, contractor, and designer. With an increase in the number of green design projects, understanding the relationship between the PDM and green design is paramount to project and contract management. While it is reasonable to assume that a relationship between green design and design-build (DB) exists since both theoretically are intended to foster an integrated, holistic, team-based collaborative project; it is also appropriate to understand the relationship between green design and other PDMs. This preliminary research examined possible relationships between design-bid-build (DBB), construction management (CM), and DB PDMs and green design with the goal of beginning to identify potential positive correspondence between them. To develop an initial understanding, two main tasks were completed. First, existing published research was evaluated to reveal aspects of projects and PDMs independent of green design. Second, the research collected primarily qualitative information by conducting structured interviews with approximately twenty-five individuals, including owners, contractors, and designers involved in completed green design projects, mainly in the public sector. Upon completion of the structured interviews, responses from the interviews were reviewed for green design project characteristics. Additionally, the interviews provided insight on the initial understanding of the current state of knowledge and experience in green design and PDMs. After the two main tasks were completed, both were evaluated for commonalities. Preliminary results found that seven green design project characteristics emerged that in some cases related to a specific PDM, but in other cases were independent of a PDM. Future research will quantitatively investigate the relationship between green design projects, PDMs, and success factors.
7
Orsi, Alessandro, Ignacio Guillén-Guillamón i Eugenio Pellicer. "Optimization of Green Building Design Processes: Case Studies within the European Union". Sustainability 12, nr 6 (14.03.2020): 2276. http://dx.doi.org/10.3390/su12062276.
Pełny tekst źródłaStreszczenie:
Green buildings have recently become a key aspect of the construction field and bring along a renovation of the whole industry chain. Such changes introduce new challenges for all subjects involved, and designers are also affected by such issues, especially for the development of projects based on international green building standards. Within this scope, project management plays a key role in the optimization of the design phase. This research analyzes the design process of international projects from the project management perspective through a multiple case study approach, considering the sustainability-related tasks that negatively affect the project design development under two types of contractual approaches: Design-Build and Design-Bid-Build. It aims to identify whether the Design-Build or Design-Bid-Build process is the best solution for developing green building projects. Two case studies in Italy and two case studies in Spain are analyzed, and the effects of the project management issues are evaluated under three different points of view: Time, cost, and level of sustainability of the building. A poorly planned process for the achievement of the various green building features of the project can impact the project schedule and the budget, whereas, a poorly managed project could also negatively impact its green building features. Finally, this research also highlights the positive relationship between process integration and green building design development.
8
Scott, Andrew. "Design Strategies for Green Practice". Journal of Green Building 1, nr 4 (1.11.2006): 11–27. http://dx.doi.org/10.3992/jgb.1.4.11.
Pełny tekst źródłaStreszczenie:
Should green buildings not only work differently, but also look, feel, and be conceived differently? The emergence of LEED accreditation as the leading form of environmental performance monitoring and its associated points and checklist format can mask the necessity for architectural projects to have focused and effective design strategies that integrate sustainability with the design process. Green accountability does not always go hand in hand with architectural quality: a good building is certainly not necessarily a green building, while a green building is not always a good work of architecture. So it becomes important to recognize the unique character and possibilities in each project and then to develop environmentally responsive concepts that support and enhance the form of the architecture. This article discusses the current context for “Green Design Practice” through a series of quite different design assignments where the focus is upon enabling the design to emerge from the recognition of the “environmental and sustainability potential.”
9
Ahmad, Tayyab, i Ajibade A. Aibinu. "Project delivery attributes influencing green building project outcomes". Built Environment Project and Asset Management 7, nr 5 (16.11.2017): 471–89. http://dx.doi.org/10.1108/bepam-11-2016-0066.
Pełny tekst źródłaStreszczenie:
Purpose While the general trends in green building (GB) research are known, there is not yet a detailed review of studies on project delivery attributes (PDAs) influencing GB project outcomes. The purpose of this paper is to review the literature to understand the contributions of existing research in this area and to identify the challenges, gaps, and lessons for the future research relating GB project delivery. Design/methodology/approach For the systematic review, specially developed coding based on Boolean operators is used to search for relevant studies in major databases, i.e. Web of Science and Scopus. The studies from the initial search (443) are subjected to two rounds of scrutiny for shortlisting only relevant publications. Using a qualitative review of the shortlisted studies (20), the research objectives and findings of the studies are synthesized and critically analyzed. The contributions and challenges facing research in this area are identified. Future research directions are proposed. Findings Studies in the area have established association between PDAs and various GB project success criteria. In the literature, some PDAs such as project delivery method have been given greater attention than others. Challenges facing PDA research in GB include: the limited number of GB project cases and the complexity of GB project delivery process involving an overwhelmingly large number of variables, thereby limiting scientific rigor and creating some gaps in knowledge. The interaction among PDAs and their cumulative effect on various project performance outcomes/metrics have not been studied, limiting the validity of the existing studies. Scope exists to apply a combination of non-linear, dynamic, probabilistic, explicit, and implicit modeling as well as inductive and deductive approaches to research in this area. Research limitations/implications Existing research findings have limited application in practice. Non-linear, dynamic, probabilistic, deductive, and inductive research techniques and approaches can substantially advance knowledge and lead to plausible findings that can be applied in practice. Originality/value Considering the critical role of PDAs in the successful delivery of GBs, the review provides clear directions for future research.
10
Nizamieva, Eh R. "Possibilities of «green» standards` adaptation to Russian design activities". Вестник гражданских инженеров 18, nr 4 (2021): 36–43. http://dx.doi.org/10.23968/1999-5571-2021-18-4-36-43.
Pełny tekst źródłaStreszczenie:
This article reflects the most relevant features of the application of international «green» standards to the project activities in the Russian Federation. Within the frames of the study, there was carried out a comparative analysis of the algorithm of applying categories and sections of three international «green» standards, namely, BREEAM, LEED, and DGNB certificate systems. Also, there were studied and analyzed Russian analogues of international «green» standards and a number of the most relevant scientific works devoted to the study of the process of adaptation and implementation of international «green» standards in Russian project activities. The main problems arising in the adaptation of «green» standards in Russian practice have been identified. The relevance and importance of obtaining knowledge and experience in the field of applying «green» standards for architects and engineers have been highlighted.
11
Yang, Jie, Jiafu Su i Lijun Song. "Selection of Manufacturing Enterprise Innovation Design Project Based on Consumer’s Green Preferences". Sustainability 11, nr 5 (6.03.2019): 1375. http://dx.doi.org/10.3390/su11051375.
Pełny tekst źródłaStreszczenie:
For enterprise, how to quickly realize the selection of green innovative design projects has become a key issue for improving innovation performance. Based on an analysis of enterprise product innovation and customer green preferences, an indicator set for innovation performance in enterprise was established. Considering the fuzziness of the correlation between indicators for innovation performance in enterprise and consumer’s green preferences, a fuzzy clustering method was used to identify the internal relations among the indicators for innovation performance with green preferences of customers. Then a wavelet neural network was used to select the innovation design project for various green preferences of customers. Finally, a case study was proposed to verify the feasibility and effectiveness of the method. This work can help the enterprise to develop green design, products, and serve uniformly, which can effectively shorten green product development cycles, reduce cost, and improve enterprise innovation performance greatly.
12
Costalonga Martins, Vanessa, Sacha Cutajar, Christo van der Hoven, Piotr Baszyński i Hanaa Dahy. "FlexFlax Stool: Validation of Moldless Fabrication of Complex Spatial Forms of Natural Fiber-Reinforced Polymer (NFRP) Structures through an Integrative Approach of Tailored Fiber Placement and Coreless Filament Winding Techniques". Applied Sciences 10, nr 9 (8.05.2020): 3278. http://dx.doi.org/10.3390/app10093278.
Pełny tekst źródłaStreszczenie:
It has become clear over the last decade that the building industry must rapidly change to meet globally pressing requirements. The strong links between climate change and the environmental impact of architecture mean an urgent necessity for alternative design solutions. In order to propose them in this project, two emergent fabrication techniques were deployed with natural fiber-reinforced polymers (NFRPs), namely tailored fiber placement (TFP) and coreless filament winding (CFW). The approach is explored through the design and prototyping of a stool, as an analogue of the functional and structural performance requirements of an architectural system. TFP and CFW technologies are leveraged for their abilities of strategic material placement to create high-performance differentiated structure and geometry. Flax fibers, in this case, provide a renewable alternative for high-performance yarns, such as carbon, glass, or basalt. The novel contribution of this project is exploring the use of a TFP preform as an embedded fabrication frame for CFW. This eliminates the complex, expensive, and rigid molds that are traditionally associated with composites. Through a bottom-up iterative method, material and structure are explored in an integrative design process. This culminates in a lightweight FlexFlax Stool design (ca. 1 kg), which can carry approximately 80 times its weight, articulated in a new material-based design tectonic.
13
Zhang, Jian Wei, Min Jie Zhu i Li Wei Zhang. "Research on Design of the Green Construction Scheme for the Engineering Project Management". Applied Mechanics and Materials 94-96 (wrzesień 2011): 1917–20. http://dx.doi.org/10.4028/www.scientific.net/amm.94-96.1917.
Pełny tekst źródłaStreszczenie:
Green construction is the main reflection of the sustainable development strategy in the application of engineering construction, and the important composition of Sustainable building industry. This article takes the green construction scheme design as object of study, summarizes the present situation and the shortage of green construction scheme design in China, and makes a certain degree of analysis. Through the research on the green construction management implementation, the design principle and the overall framework of the green construction scheme is determined by raising the green construction consciousness, solving economic security, establishing and perfecting the legal system of rules and regulations, evaluation system, and regulate the green design framework of content, promote the concrete implementation of green construction.
14
Zhang, Ying, Bing Yang Hou i Shu Ting Li. "Design Strategy Based on Green Building - Take the “City Plaza” Project as an Example". Applied Mechanics and Materials 368-370 (sierpień 2013): 1158–63. http://dx.doi.org/10.4028/www.scientific.net/amm.368-370.1158.
Pełny tekst źródłaStreszczenie:
The project of City Plaza and its office buildings all regard the green three-star as the overall design goal, which has been identified by the China's Green Three-star Design Evaluation. This project could make rational use of the natural conditions and ecological energy-saving technology to the maximum extent by the comprehensive planning and architectural monomer design, and adopt the low-cost and low-input way such as the green building materials to balance and protect the surrounding ecosystem. Therefore, it could improve the energy-saving efficiency of project and explore a new organic mode to apply modern green building energy-saving technologies in the process of tradition respect and protection.
15
Cheng, Jack C. P., i Vignesh Venkataraman. "Analyzing relationships between project team compositions and green building certification in green building projects". Built Environment Project and Asset Management 6, nr 5 (7.11.2016): 449–61. http://dx.doi.org/10.1108/bepam-10-2015-0056.
Pełny tekst źródłaStreszczenie:
Purpose Literature on organizational analysis identified that project participants have a certain impact on the project outcome. However, there is no study that identifies the impact of project teams and individual project participants on a green building project. The purpose of this paper is to analyze the impact of green building project teams on green building certification. Design/methodology/approach Project information, project team information, and green building certification grade were collected using the Canadian green building database. Project team data were analyzed and organizations were ranked based on their green building project experience and collaborations with experienced green building organizations. The page rank algorithm is used to calculate the rank of organizations in order to identify the impact of organizational rank on the final green building certification grade of a project. Findings The results show a positive relationship between the green building certification grade and the number of organizations with more green building experience in a project team. The results also show that not having experienced key organizations such as owners, designers, and contractors will likely lead to a lower green building certification grade. Originality/value Impact of project teams on green building projects has not been studied before. This study used an innovative method to analyze green building project teams and to investigate the importance of green building project experience. The findings of this study provided evidence to support the influence of project team compositions in green building projects. The results presented in this paper can help project owners and managers during project team formation for successful execution of green building projects.
16
Hurley, William L., i Craig Funston. "The Design and Construction of the Floating Golf Green". Marine Technology and SNAME News 31, nr 01 (1.01.1994): 20–40. http://dx.doi.org/10.5957/mt1.1994.31.1.20.
Pełny tekst źródłaStreszczenie:
This paper relates the evolution of a design and construction project of interest to the engineering community, that of a floating golf green. It also presents technical details on the unique aspects of this project and elucidates the design development process by explaining the evolution of technical criteria and their application to the facility design. A patented technique for construction of a large rigid pontoon from small prefabricated modules is described and final design and construction details are summarized. Numerous naval architecture and engineering tasks covering various disciplines were involved, including: design of steel, concrete, and composite structures; climatology assessment; determination of structural wave loads and mooring loads; design of fixed and adjustable mooring systems; provision of aesthetic design: design of piping systems; and development of weight assessment tools.
17
Wang, Yingchen, Ling Lv, Xiaoxiao Geng, Liyuan Ren i Ran Sun. "Research on Cooperative Evolutionary Game of Design and Construction Consortium of Green Building Project under Design Change". Buildings 13, nr 5 (25.04.2023): 1146. http://dx.doi.org/10.3390/buildings13051146.
Pełny tekst źródłaStreszczenie:
In recent years, with the country’s vigorous promotion of green buildings and the increasingly complex and large-scale engineering projects, the design-construction consortium model can better meet the needs of the organization and implementation of large-scale green projects and become a realistic choice for enterprises in project implementation. Therefore, the formation of a good and stable cooperative relationship between consortium members is increasingly important in improving project revenue and quality. The issue of maintaining the stability of consortium relationships is an urgent problem to be solved at this stage. As such, a three-party evolutionary game model, based on evolutionary game theory, comprising the developer unit, design unit, and construction unit, is constructed here. Then, strategies for ensuring evolutionary stability under different design modalities are discussed. Finally, the influence of relevant parameters under changing design conditions on the stability of the design and construction consortium of green building projects is analyzed through numerical simulation. The research results show the following: (1) If the additional revenue distribution coefficient within the consortium members is closer to 0.5, the influence on the stability of the design and construction consortium will be smaller; in contrast, if the influence on the design and construction consortium is increased, the cooperative relationship within the consortium will be more unstable. (2) The presence of additional revenue ∆π1 can increase the stability of the design and construction consortium. An increase in the additional revenue ∆π1 will inhibit the instability of the consortium on the one hand and strengthen the stability of the consortium on the other but will also lead to the occurrence of opportunistic behavior. (3) The construction unit’s payment of a subsidy to the cooperative members can help promote the stability of the design and construction consortium to a certain extent and can also weaken the effects of other factors on the stability of the consortium, but there is a threshold value for the amount of said subsidy. (4) On the one hand, the cooperation members actively cooperate with each other to maximize the cooperation benefits of the design and construction consortium, while on the other hand, the construction unit actively promotes the implementation of the green building project, strictly monitors the implementation of the green design and green construction approach by the design and construction units in the early and implementation stages of the project, prevents the design changes caused by the final product failing to meet the green building standard, and actively solves design change problems in a manner that benefits the sustainable development of the green building, so that the cooperative relationship among the members of the consortium can develop steadily, which is beneficial to the green and ecological development of architectural design and construction.
18
Ullah, Shakir, Sergey Barykin, Ma Jianfu, Taher Saifuddin, Mohammed Arshad Khan i Ruben Kazaryan. "Green Practices in Mega Development Projects of China–Pakistan Economic Corridor". Sustainability 15, nr 7 (28.03.2023): 5870. http://dx.doi.org/10.3390/su15075870.
Pełny tekst źródłaStreszczenie:
This research aimed to investigate the green practices in the mega construction project of the China–Pakistan Economic Corridor (CPEC). Over recent years, there has been an increasing need for adopting and implementing more green and sustainable practices, leading to national and international sustainable and green environmental agendas. To address the issue, green project practices were considered an independent variable comprising green design, procurement, and construction. The dependent variables were environmental performance and economic performance. Primary data were collected from respondents working on the CPEC project. A representative sample of 276 respondents was used. The analysis was conducted using PLS-SEM. The results indicated that green design significantly influences economic performance, green procurement has a positive and significant effect on environmental performance, and green construction has a positive and significant impact on both environmental and economic and financial performance. The research showed that construction management at CPEC should adopt all facets of green project practices together, reducing negative environmental effects, increasing environmental benefits, and improving long-term economic performance in the area.
19
Kim, Joseph J., Christopher W. Goodwin i Sunkuk Kim. "COMMUNICATION TURNS GREEN CONSTRUCTION PLANNING INTO REALITY". Journal of Green Building 12, nr 1 (styczeń 2017): 168–86. http://dx.doi.org/10.3992/1552-6100.12.1.168.
Pełny tekst źródłaStreszczenie:
Green planning is critically important during the design phases of construction projects but continually gets less attention during construction. Project owners and planners need to understand how communication influences green implementation. To address a gap in the extant research, this paper presents the evaluation results on how sustainability awareness of field supervision personnel impacts the successful completion of school projects by proving that communicating sustainability goals with them is vital for decision-making during the construction stage of the project. This paper uses data collected from 162 new school construction projects to compare sustainability design goals with their successful incorporation into completed projects. Seventy-one project managers and inspectors were surveyed to assess their awareness of key high-performance sustainability requirements that were built into the designs. The responses from these two groups were compared to examine the positive or negative impacts. The analysis results show that early and continuous communication of sustainability design goals with field supervision personnel has a significant impact on whether those goals are realized when the project is turned over to the owner for occupancy. Successful implementation of sustainability goals not only provides economic benefits from fully exploiting life-cycle costs, but also holds the promise of providing a healthier working environment.
20
Zhao, Xia, i Yong Sheng Zhang. "How to Create Green Buildings from Perspective of Evaluation Label: Taking Taiyuan No. 63 Middle School Campus Rebuilding Project as an Example". Applied Mechanics and Materials 253-255 (grudzień 2012): 8–12. http://dx.doi.org/10.4028/www.scientific.net/amm.253-255.8.
Pełny tekst źródłaStreszczenie:
Based on the Evaluation Standard for Green Buildings, we selected Taiyuan No. 63 Middle School Campus Rebuilding Project (which won “Two-Star Evaluation Label for Green Building Design”) as an engineering case, studied main design methods and technical means for this project from the perspective of an evaluation label, summarized relevant experiences, and put forward factors to be emphatically taken into account in creating green buildings as well as associated precautions.
21
Li, Ying, Lei Xu, Tao Sun i Ronggui Ding. "The impact of project environmental practices on environmental and organizational performance in the construction industry". International Journal of Managing Projects in Business 13, nr 2 (29.07.2019): 367–87. http://dx.doi.org/10.1108/ijmpb-07-2018-0137.
Pełny tekst źródłaStreszczenie:
Purpose Scholars and practitioners have recognized the significance of integrating environmental practices into project context. This paper focuses on project environmental practices (PEP) and identifies PEP from the life cycle perspective, which includes green design, green procurement, green construction and investment recovery. The purpose of this paper is to empirically investigate the relationship among the four aspects of PEP and their effects on environmental performance and organizational performance. Design/methodology/approach A theoretical model was established and several hypotheses were developed. This study applied a survey method to test the hypothesized relationships. Based on a sample of 159 respondents, partial least squares structural equation modeling analyses were conducted. Findings The results show that green design has a positive impact on green procurement, green construction and investment recovery. Green procurement is also confirmed to positively influence green construction. Further, green construction and investment recovery have a direct and positive impact on environmental and organizational performance, whereas green design and green procurement influence environmental and organizational performance indirectly through green construction. Environmental performance has a significant impact on organizational performance. Originality/value This study enhances the understanding on PEP by revealing the inter-relationships among its four aspects and establishes the links between PEP and performance outcomes. The findings will contribute to the literature on the integration of environmental principles and project context.
22
Ling, K. W., i D. Y. S. Mah2. "Building Water Sensitive Urban Design : Modelling of Green Roof". Journal of Civil Engineering, Science and Technology 6, nr 2 (1.09.2015): 1–10. http://dx.doi.org/10.33736/jcest.145.2015.
Pełny tekst źródłaStreszczenie:
This project evaluates green roofs as a stormwater management tool. The goal of the project is to develop a computer aided stormwater model incorporating green roof, and evaluate its effectiveness. Specifically, the influence of media type, media depth, duration of rainfall event and average reoccurrence interval are investigated in design rainfall. The finalised model is then validated based on observed rainfall for the months of January and February of 2014. Results indicate that the green roofs are capable of removing 73.5% and 86.9% of the monthly rainfall volumes for January and February 2014, respectively, from a roof through retention. Water retention by green roofs effectively increases the time to reach the peak runoff, and slows the peak flows for a watershed. There are seasonal considerations as more runoff is generated during the month of January (northeast monsoon season) compared with the month of February (normal weather). Green roof is also effective in retaining 100% of several storms of less than 10 mm. The results demonstrate that the proposed extensive green roof for the study area functions as an excellent bio-retention system for stormwater control. The results of this research are in tandem with those of other researches performed throughout the world on hydrologic characteristics of green roof.
23
Fantucci, H., i R. M. Santos. "Mineral carbonation as a design project for green chemical engineering education". IOP Conference Series: Materials Science and Engineering 1196, nr 1 (1.10.2021): 012009. http://dx.doi.org/10.1088/1757-899x/1196/1/012009.
Pełny tekst źródłaStreszczenie:
Abstract Accelerated mineral carbonation is a promising CO2 sequestration technology that is strongly linked to concepts of sustainability and Green Chemistry, and its process requirements apply principles of reaction kinetics, transport phenomena, and materials characterization. The present work aimed to develop educational tools for including accelerated mineral carbonation in chemical engineering curricula. To this end, an experimental investigation laboratory procedure and a design project outline have been conceived. As a way to further engage students in this learning experience, the process conditions for the laboratory work are varied between groups of students, and the experimental data obtained are pooled to be used by every group for the subsequent design exercise. This is meant to give students motivation to generate accurate data that they knew would be useful for the entire class and, at the same time, provide students with the opportunity to use data generated by colleagues, much in the same way the design work is done in the industry. In the design project, students use the experimental data obtained by themselves and classmates on the accelerated mineral carbonation of wollastonite, to determine if this is a feasible process for industry to sequester carbon dioxide, in view of mitigating climate change. Also, they use the experimental data, acquired using a range of process conditions, to study the effect of the process variables (CO2 pressure and mixing rate) on the carbonation kinetics and mass transfer rate. The focus of our previously published article was on the experimental investigation, while the focus of this conference paper is on the design project.
24
Lee, Bo Kyeong, So Young Sohn i Seunghee Yang. "Design guidelines for the Dashilar, Beijing Open Green Space Redevelopment Project". Urban Forestry & Urban Greening 13, nr 2 (2014): 385–96. http://dx.doi.org/10.1016/j.ufug.2013.12.008.
Pełny tekst źródła
25
Yang, Yun Hui. "Green Building Implementation through Integrated Project Delivery System". Advanced Materials Research 1065-1069 (grudzień 2014): 2177–81. http://dx.doi.org/10.4028/www.scientific.net/amr.1065-1069.2177.
Pełny tekst źródłaStreszczenie:
The building industry is undergoing a substantial transition period. There are three significant trends that are driving these changes in the industry. These trends are building information modeling (BIM), sustainable design and construction (green), and integrated project delivery system (IPD). They are not only re-shaping the building industry, but also reshaping the construction management and career education. This paper presents the advantages and challenges of green building implementation through integrated project delivery system (IPD). Which was refined based on literature reviews, requests for information from professionals and members of the industry advisory group.
26
Jiao, Yi, Gang Xu, Xiao-Hao Cui, Zhe Duan, Yuan-Yuan Guo, Ping He, Da-Heng Ji i in. "The HEPS project". Journal of Synchrotron Radiation 25, nr 6 (26.09.2018): 1611–18. http://dx.doi.org/10.1107/s1600577518012110.
Pełny tekst źródłaStreszczenie:
The High Energy Photon Source (HEPS), a 6 GeV green-field diffraction-limited storage ring light source, will be built in Beijing, China. The HEPS design has been evolving for about ten years, and is now mostly finished and ready for construction. The storage ring is based on a modified hybrid seven-bend achromat (7BA) design, where bending magnets with reverse bending angles and longitudinal gradients are adopted to reach an ultralow natural emittance of 34.2 pm with a circumference of 1360.4 m. The central slice of the dipole in the middle of the modified hybrid 7BA, with flexible magnetic field, is used as the source of the bending-magnet beamline. Moreover, alternating high- and low-beta sections are specially designed to generate and deliver X-ray synchrotron radiation with high brightness of 5 × 1022 photons s−1 mm−2 mrad−2 (0.1% bandwidth)−1. Here, the HEPS storage ring design and solutions to the challenges inherent in this ultralow-emittance design are presented.
27
Zhang, Zhi Jun. "Goals and Operation of Green Building". Applied Mechanics and Materials 438-439 (październik 2013): 1706–9. http://dx.doi.org/10.4028/www.scientific.net/amm.438-439.1706.
Pełny tekst źródłaStreszczenie:
Green building, also known as green construction or sustainable building, refers to a structure and using process that is environmentally responsible and resource-efficient throughout a buildings life-cycle from siting to design, construction, operation, maintenance, renovation and demolition. This requires close cooperation of design team, architects, engineers, and client at all project stages. The green building practice expands and complements the classical building design concerns of economy, utility, durability and comfort.
28
Ismail, Noor Akmal Adillah, Hazwani Ramli, Elma Dewiyana Ismail, Raja Rafidah Raja Muhammad Rooshdi, Shaza Rina Sahamir i Nur Hidayah Idris. "A Review on Green BIM Potentials in Enhancing the Construction Industry Practice". MATEC Web of Conferences 266 (2019): 01023. http://dx.doi.org/10.1051/matecconf/201926601023.
Pełny tekst źródłaStreszczenie:
The construction industry environment nowadays is becoming more complex with more issues to be resolved with the agreeable approaches amongst the team. Nevertheless, the Building Information Modelling (BIM) innovation is acknowledged to disentangle those prevalent issues towards delivering a better project performance. With the emergence of BIM technology, various concerns such as constant errors and reworks, team-miscommunication, construction waste, energy inefficiencies, and many more in the industry practices, could be refined. Specifically, BIM capabilities mainly facilitate the design and construction operations. Albeit the processes involved demand an early planning and profound decision-making, the BIM mechanism helps the project team to execute the proposed construction projects effectively. With regards to maintaining the sustainability in the industry, “Green BIM” term is introduced to describe the manipulation of BIM technology to be incorporated along with the sustainable design and construction techniques. Therefore, this paper reviews the potentials of “Green BIM” in improving the traditional practices of project stakeholders throughout the project life cycle, particularly focusing on the design and construction phases. It discusses the previous studies on “Green BIM”, “Green BIM” concepts, and “Green BIM” approaches concerning its benefits and challenges in enhancing the construction industry practices. Significantly, through the appropriate “Green BIM” resolution, the procedures initiated with the green settings and completed with the green requirements, could empower more sustainable construction industry
29
Vinky Rahman i Sakinah Nauli Siregar. "The Riverfront Conservatory (Conservatory Design in Kualanamu Region with Futuristic Architecture Approach)". International Journal of Architecture and Urbanism 4, nr 1 (28.06.2020): 99–111. http://dx.doi.org/10.32734/ijau.v4i1.3861.
Pełny tekst źródłaStreszczenie:
A conservatory is both a tourism center and a place for plant preservation in which it is considered to be able to respond to both of the problems that Medan is facing, which are lack of feasibility of tourism and green space. With its function, the design aims to improve Medan tourism as well as to provide green space for the local community. The method used in designing this project is data collection through field surveys and literature studies. The location of the project is at Kualanamu Region as the need for the development of a tourism center in Kualanamu district as for the enhancement of the tourism becomes the busiest airport in Sumatera Utara. To reflect the concept of the conservatory, the theme of the project is futuristic architecture. As a large scale glass house, the main problem of the design is how to maintain the air temperature stable inside the building. The idea is to replace the use of glass with ETFE Panel, which is made from plastic and weighing only 1% of the glass. The project site is located near the river to support the green space concept. With various approaches towards design, this project is expected to be able to provide new opportunities for Medan tourism.
30
Well, Friederike, i Ferdinand Ludwig. "Development of an Integrated Design Strategy for Blue-Green Architecture". Sustainability 13, nr 14 (16.07.2021): 7944. http://dx.doi.org/10.3390/su13147944.
Pełny tekst źródłaStreszczenie:
Blue-green architecture entails buildings that contribute to improving the urban climate through the synergetic combination of water management and vegetation. They are part of an urban blue-green infrastructure network that combines ecosystem services in a multifunctional way. Projects implemented in an interdisciplinary manner create synergies with regard to the combination of water-related and vegetation-related objectives. However, applicable design strategies for this approach are currently lacking in practice. This paper investigates the approach of a blue-green architectural project in Stuttgart (the so called “Impulse Project”) and derives insights for an integrated design strategy. The analysis and transfer of the research is carried out by using the research by design methodology. For this purpose, the interdisciplinary design process is divided into three phases (pre-design, design, post-design) and described in detail. Reflection on the documented design reveals the knowledge gained and enables the transfer of the findings to future projects by means of the integrated design strategy for blue-green architecture.
31
Raouf, Ayman, i Sami Al-Ghamdi. "Framework to Evaluate Quality Performance of Green Building Delivery: Project Brief and Design Stage". Buildings 11, nr 10 (13.10.2021): 473. http://dx.doi.org/10.3390/buildings11100473.
Pełny tekst źródłaStreszczenie:
Design quality considers the extent to which the owner’s requirements are accurately synthesized into conformance specifications and drawings for the construction team to execute. Expected superior performance and sustainability of a green building require diligence in design to ensure its specifications are accurately stipulated. Several studies reported mismatches between expected and actual performances in green buildings that were attributed to poor design. This study thus revisits the design process and proposes a framework to map the quality activities in the project brief and design stages using the integration definition for function modeling (IDEFO) process. Semi-structured interviews and a focus group validated the framework and revealed issues in the current design practice that cause insufficient design solutions. Additionally, project delivery systems were discussed, with conditions for improving their suitability. This research contribution elucidates recommended quality activities necessary for green buildings, which often are not implemented in the construction industry, to ultimately ensure that green buildings are properly designed to meet sustainability objectives.
32
Raouf, Ayman, i Sami Al-Ghamdi. "Framework to Evaluate Quality Performance of Green Building Delivery: Project Brief and Design Stage". Buildings 11, nr 10 (13.10.2021): 473. http://dx.doi.org/10.3390/buildings11100473.
Pełny tekst źródłaStreszczenie:
Design quality considers the extent to which the owner’s requirements are accurately synthesized into conformance specifications and drawings for the construction team to execute. Expected superior performance and sustainability of a green building require diligence in design to ensure its specifications are accurately stipulated. Several studies reported mismatches between expected and actual performances in green buildings that were attributed to poor design. This study thus revisits the design process and proposes a framework to map the quality activities in the project brief and design stages using the integration definition for function modeling (IDEFO) process. Semi-structured interviews and a focus group validated the framework and revealed issues in the current design practice that cause insufficient design solutions. Additionally, project delivery systems were discussed, with conditions for improving their suitability. This research contribution elucidates recommended quality activities necessary for green buildings, which often are not implemented in the construction industry, to ultimately ensure that green buildings are properly designed to meet sustainability objectives.
33
Wang, Da Wei. "Study of Green Building Design Based on Micro-Project in Correlate Urban Ecological Environment". Applied Mechanics and Materials 329 (czerwiec 2013): 51–55. http://dx.doi.org/10.4028/www.scientific.net/amm.329.51.
Pełny tekst źródłaStreszczenie:
In this paper, by placing buildings in the urban complex ecosystem, the definition of green buildings is analyzed and interpreted. Also, the characteristics of the extensive correlation between buildings and urban ecological system are introduced. The problems that regional characteristics and urban foundations are ignored in the green building evaluation index system are proposed, and also the technical paths for the design of green building indexes are shown. Through the system characteristics of the green building indexes design, the complexity of urban ecological construction and management is revealed, and also the weak points and improvement measures of China's urban ecological construction are analyzed.
34
Xiong, Lin, i Dan Fei Mao. "Green Industrial Building Design for Hot Summer and Cold Winter Zone". Applied Mechanics and Materials 357-360 (sierpień 2013): 543–46. http://dx.doi.org/10.4028/www.scientific.net/amm.357-360.543.
Pełny tekst źródłaStreszczenie:
This document explains and demonstrates how to design green industrial building . The article analyzes how to implement green industrial building focus on research of green industrial building project design according to evaluation guidelines and explanations of green industrial building. Provide passive design methods proposal for green building. In order to design to create comfortable and productive work environment for the users the construction details shoud be focused on flat and shape ,control,section flat and lighting external space in hot summer and cold winter zone.
35
Smith, Ryan K. "The Cross: Church Symbol and Contest in Nineteenth-Century America". Church History 70, nr 4 (grudzień 2001): 705–34. http://dx.doi.org/10.2307/3654546.
Pełny tekst źródłaStreszczenie:
In 1834 the rector of St. Mary's Episcopal Church in Burlington, New Jersey desired to place a cross atop his newly-refurbished sanctuary. No ordinary rector, George Washington Doane also served as the Episcopal bishop of New Jersey. Shortly after taking charge of St. Mary's in 1833, he and his vestry had decided to renovate their old church, and their ambitious new design featured a cruciform plan with Greek details, including a pediment adorned with lotus leaves and a tower “derived from that built at Athens… commonly called the Tower of the Winds.” But when Doane carried out the plans for “an enriched Greek Cross” to be mounted on the roof, the community stood aghast. A local Presbyterian minister chronicled the confrontation, and he began by asserting that most of St. Mary's vestrymen had originally approved the designs without “noticing the Cross at the time.” The project was thus completed, and to the vestry's “great surprise, as well as that of many in the community, of all ‘denominations’—lo! a Cross made quite a Catholic appearance on the apex of the pediment!” Controversy arose, “both in the Vestry and out of it,” and “after a very warm meeting, one of the Vestry shortly after declared that unless the Cross was taken down very soon, it should be pulled down.”
36
Jiang, Shen, i Wang Lei. "The Application of BIM in Green Building Energy Saving: Take Helsinki Music Center as an Example". Advanced Materials Research 935 (maj 2014): 3–7. http://dx.doi.org/10.4028/www.scientific.net/amr.935.3.
Pełny tekst źródłaStreszczenie:
In recent years, Green BIM (building information modeling) is paid much attention and gets widespread concern in construction field, the majority of the projects using green building BIM technology also gained good results to effectively balance between sustainability and economic. This study is based on the innovation practice using BIM technology do energy simulation design in The Helsinki Music Center project. This project Build Green Building Environment through the followings: three-dimensional building information model, Energy Simulation at the Schematic Design Stage, Energy Simulation for Comparison of Design Alternatives, Lifecycle Assessment Analysis. This paper will give you a detail analysis.
37
Yang, Xiao Dong, Qiang Wei i Jun Feng Li. "Transformation Design of a High-Rise Building". Applied Mechanics and Materials 351-352 (sierpień 2013): 1038–42. http://dx.doi.org/10.4028/www.scientific.net/amm.351-352.1038.
Pełny tekst źródłaStreszczenie:
The paper illustrated design process and announcements of the reconstruction through a project example.The structure had been made an integral analysis by analysis software MIDAS/GEN which can separately consider different material damping ratio. The results show that Structure would be more likely to generate the translational mode based on concrete vibration in the earthquake.This paper introduced the application of the design concept of green building in this project.
38
Anantika, Tiara. "Application of Green Building Concept (Rainwater Harvesting) at Menara Cibinong Apartment". Journal of Architectural Research and Education 1, nr 2 (1.01.2020): 147. http://dx.doi.org/10.17509/jare.v1i2.22306.
Pełny tekst źródłaStreszczenie:
The implementation of Green Building criteria is relatively new in plumbing installation. Bogor regency is a city of rain, rainfall data of 18.09 mm/day so that the concept of green buildings can be applied with the use of rain water. Consequently, the integration of these criteria into the design process has the potential to change the design process itself. The implementation of the green building criteria into the conventional design process will be discussed in this paper. The concept of this project is to design an apartment that has 5 towers of 20 floors each with a green building concept. To achieve this goal, the Green Building criteria has been implemented since the beginning of the design process until the detailing process on the end of the project. Several studies were performed throughout the design process, such as Conceptual reviews, where several professionally proved theories related to plumbing installation systems and used for a reference. Rainwater harvesting can save 3,48% of clean water from water sources.Keywords—Plumbing Installation, Green Building, Rainwater Harvesting
39
de Haas, Petra, Bazezew Yenew, Getu Diriba, Misikir Amare, Andrii Slyzkyi, Yohannes Demissie, Bihil Sherefdin i in. "The Simple One-step stool processing method for detection of Pulmonary tuberculosis: A study protocol to assess the robustness, stool storage conditions and sampling strategy for global implementation and scale-up". PLOS ONE 17, nr 10 (4.10.2022): e0264103. http://dx.doi.org/10.1371/journal.pone.0264103.
Pełny tekst źródłaStreszczenie:
Background The Xpert MTB/RIF Ultra (Xpert-Ultra) assay provides timely results with good sensitivity and acceptable specificity with stool specimens in children for bacteriological confirmation of tuberculosis (TB). This study aims to optimize the Simple One-Step (SOS) stool processing method for testing stool specimens using the Xpert-Ultra in children and adults in selected health facilities in Addis Ababa, Ethiopia. The study is designed to assess the robustness of the SOS stool method, to help fine-tune the practical aspects of performing the test and to provide insights in stool storage conditions and sampling strategies before the method can be implemented and scaled in routine settings in Ethiopia as well as globally. Methods and design The project “painless optimized diagnosis of TB in Ethiopian children” (PODTEC) will be a cross sectional study where three key experiments will be carried out focusing on 1) sampling strategy to investigate if the Xpert-Ultra M. tuberculosis (MTB) -positivity rate depends on stool consistency, and if sensitivity can be increased by taking more than one stool specimen from the same participant, or doing multiple tests from the same stool specimen, 2) storage conditions to determine how long and at what temperature stool can be stored without losing sensitivity, and 3) optimization of sensitivity and robustness of the SOS stool processing method by varying stool processing steps, stool volume, and storage time and conditions of the stool-sample reagent mixture. Stool specimens will be collected from participants (children and adults) who are either sputum or naso-gastric aspiration (NGA) and/or stool Xpert-Ultra MTB positive depending on the experiment. Stool specimens from these participants, recruited from 22 sites for an ongoing related study, will be utilized for the PODTEC experiments. The sample size is estimated to be 50 participants. We will use EpiData for data entry and Stata for data analysis purposes. The main analyses will include computing the loss or gain in the Xpert-Ultra MTB positivity rate and rates of non-determinate Xpert-Ultra test results per experiment compared to the Xpert-Ultra MTB result of stool processed according to the published standard operating procedures for SOS stool processing. The differences in the MTB positivity rate by regarding testing more than one sample per child, and using different storage, and processing conditions, will be also compared to the baseline (on-site) Xpert-Ultra result.
40
Pillay, Theogan Logan, i Akshay Kumar Saha. "Passive, Low-Energy Design and Green Star Strategy for Green Star-Rated Buildings in South Africa". Energies 15, nr 23 (1.12.2022): 9128. http://dx.doi.org/10.3390/en15239128.
Pełny tekst źródłaStreszczenie:
Services surrounding green buildings are specialised and directed towards the process of design and comprise comprehensive and quantified management in its entirety. Implicitly, consultancies are unable to deliver this service at the standard and pace required in the preliminary stages of design, and not all clients or consultants will require the services to be essential. The main aim is to stabilise the several characteristics prompting one another to optimise design performance against the optimisation algorithms. Green Star is a universal evaluation tool, assessing not only green characteristics but also elements that influence wellbeing and occupant health, such as indoor environment quality. The tools for Green Star rating can be used to measure the green features of a building from the design phase right to the stage of site handover (known as “As-Built”). This paper refers, in the literature review, to the passive and low-energy design methods of a Green Star-rated building at early design stages. The “green” project management of a project is to coordinate multidisciplinary incorporation and to accompany the costing contribution tools presented in this paper. The passive and low-energy design tools discussed entails the amalgamation of electrical and mechanical services together with architecture, i.e., space layout and envelope design. This paper compares rationalised energy and indoor environment performance between two buildings against the activities and climatic conditions within a targeted Green Star-rated building. Proposals regarding 4- and 6-star ratings and techniques have been evaluated and presented for the two buildings.
41
Chan, Karen M. K., i Edwin M. L. Yiu. "Green Voice Project: Preserving the Healthy Voice in Teachers". Perspectives on Voice and Voice Disorders 21, nr 2 (lipiec 2011): 62–70. http://dx.doi.org/10.1044/vvd21.2.62.
Pełny tekst źródłaStreszczenie:
This article reviews five recent studies on preventing voice problems in vocally healthy student teachers and teachers. The differences in research design are discussed and suggestions for future studies are provided. A prevention study carried out at The University of Hong Kong also is reported. Preliminary results suggest that voice care information may be useful in preventing voice problems in teachers.
42
Wang, Ka, Zhen Yu Cao i Lei Xu. "Old Neighborhoods Renovation Design from Low-Carbon Eco Perspective - About Yong Kong “Old Town Characteristic Cultural Blocks” Renovation Design". Applied Mechanics and Materials 641-642 (wrzesień 2014): 648–53. http://dx.doi.org/10.4028/www.scientific.net/amm.641-642.648.
Pełny tekst źródłaStreszczenie:
This study is about the old neighborhoods renovation assessment and design with questions of five times adjustment for Yong Kang Project urban design. Old neighborhoods renovation assessment criteria are set up through compare with Green Community Assessment criteria to the adjusting problems. The indices are used in the planning of this project. The results verify the necessity and feasibility of old neighborhoods renovation design from low-carbon eco perspective.
43
Pourzolfaghar, Zohreh, Rahinah Ibrahim i Nor Mariah Adam. "Explicating Mechanical and Electrical Knowledge for Design Phase of Green Building Projects". Journal of Information & Knowledge Management 15, nr 01 (marzec 2016): 1650002. http://dx.doi.org/10.1142/s0219649216500027.
Pełny tekst źródłaStreszczenie:
Construction projects usually encompass numerous disciplines, requiring the integration of knowledge from civil, mechanical, electrical and other engineering domains. Some researchers contend that the integration of construction knowledge and experience at the early design phase would improve the overall project performance. Domination of tacit knowledge during design phase of building projects is the major source of knowledge flow problems between involved professionals. Therefore, this study intends to explicate the required mechanical and electrical knowledge which has to be considered during the conceptual design phase of a green building project. To fulfil this goal, a case study has been conducted to specify the entity of the required mechanical and electrical knowledge. The primary method for the data collection here is observation. Furthermore, this study employs the triangulation method in order to validate the collected data. The results contain the required mechanical and electrical knowledge which has to be considered during the conceptual design phase of a green building project.
44
Pektaş, Şule Taşlı, N. Şule Aybar, N. Yaprak Savut i Hunt McKinnon. "Integrating Green Building Approaches to Interior Architecture Education: A Cross-Cultural Study". Open House International 40, nr 3 (1.09.2015): 24–31. http://dx.doi.org/10.1108/ohi-03-2015-b0005.
Pełny tekst źródłaStreszczenie:
The success of the efforts for green building depends largely on integrating such approaches with building design education. However, most of the existing studies on green building have focused on the technical issues, while its socio-cultural and educational aspects have been less examined. In order to alleviate the problem, this paper presents an international workshop that explores how green building design can be taught in a global teamwork project using a green building assessment system, Leadership in Energy and Environmental Design (LEED) checklist as a framework and examples of vernacular architecture as precedents. The results of an empirical survey reveals a gap between students' general learning about green building in a developing and a developed country and suggests that a collaborative project experience may facilitate bridging the gap and exchanging technical and cultural information related to sustainability.
45
Zheng, Jianhao, Yucai Wu, Wei Wang, Dan Wang i Xiaodong Shang. "Key Technology Research and Demonstration Application of Green Design and Construction of Zihui Expressway". E3S Web of Conferences 145 (2020): 02009. http://dx.doi.org/10.1051/e3sconf/202014502009.
Pełny tekst źródłaStreszczenie:
This paper takes Zihui expressway as an example, from the perspective of green design and construction of mountain expressway, this paper mainly discusses and analyzes the project characteristics and technical requirements of Zihui expressway, and puts forward the key technology of green design and construction based on the establishment of green highway.
46
Altor, Anne. "Green Roofing in Indiana: Case Studies and Design Notes". Journal of Green Building 5, nr 3 (1.08.2010): 50–68. http://dx.doi.org/10.3992/jgb.5.3.50.
Pełny tekst źródłaStreszczenie:
Green roof technology and implementation are taking root in North America at an accelerating pace. Growing recognition of the benefits of green roofs and increasing interest in green infrastructure are leading to expansion of green roof technologies that have been in use for decades in Europe and elsewhere. While some regions have adopted the use of green roofs on a large scale, other areas are warming up to the concept more slowly. Large-scale implementation of green roofs has not yet occurred in Indiana, but a number of exemplary projects have been constructed, and there are signs that interest in the technology is increasing in the state. The purpose of this article is to provide an overview of green roof technology, analyze selected green roofs in Indiana, explore trends in the state, and address issues for future development of green roof technology in the region. A variety of green roofs were investigated throughout the state. Discussions were held with individuals involved in each project to obtain technical and logistical details of green roof design, installation, and performance.
47
Orsi, Alessandro, i Eugenio Pellicer Armiñana. "THE INTEGRATION OF GREEN-BUILDING TASKS AND PROJECT-DESIGN PROCESSO - CASE STUDY". MIX Sustentável 4, nr 2 (10.07.2018): 105–12. http://dx.doi.org/10.29183/2447-3073.mix2018.v4.n2.105-112.
Pełny tekst źródła
48
Wang, Xiao Yan, Jian Guo Wang, Chen Xi Wang, Chang Jun Zhang i Kai Deng. "Equipment Design of Pollution Control". Applied Mechanics and Materials 577 (lipiec 2014): 1215–18. http://dx.doi.org/10.4028/www.scientific.net/amm.577.1215.
Pełny tekst źródłaStreszczenie:
Hubei Shiyan is the largest city in the source of South to North Water Diversion Project in China. The City District has 100 km of river, along cross-strait with high-rise buildings, dense population, and coverged sewage straight flow to the river. In our paper, the design of "Ming change dark" river closure project can fundamental solve the city environmental pollution problems, improve the source water quality without any menace from the "rear", and make Shiyan's green economy grow rapidly. On the other hand, this "city agriculture" new thinking will completely change the serious situation of arable land area which is decreasing year by year in the world.
49
Song, Yiwen, i Cheng Chang. "A Practical Study of Green Building Energy Efficiency Solutions for Public Building Projects". Journal of Physics: Conference Series 2185, nr 1 (1.01.2022): 012058. http://dx.doi.org/10.1088/1742-6596/2185/1/012058.
Pełny tekst źródłaStreszczenie:
Abstract Under the background of ecological civilization construction, this article aims at the Qingdao Shooting Sports Center project, with the specific technical scheme, and energy consumption calculation adopted in green construction and energy saving. Combining the theoretical knowledge of green buildings with actual projects, through the energy-saving assessment of the project, the type and quantity of energy consumption of the project are grasped, the energy consumption level of the project is analyzed, and the rationality of the energy utilization of the project and the feasibility of energy-saving measures are evaluated. This article provides some reference data and research for preparing the green and energy-saving design and evaluation report of public building projects.
50
Li, Li, i Li Xin Wang. "Application of BIM Technology in Green Building Engineering Construction". Advanced Materials Research 860-863 (grudzień 2013): 1301–5. http://dx.doi.org/10.4028/www.scientific.net/amr.860-863.1301.
Pełny tekst źródłaStreszczenie:
BIM is a direct application of information technology in construction industry. It covers the whole life cycle of engineering construction, including project planning, design, construction, operation and maintenance. BIM improves the engineering quality, saves cost and improves production efficiency. In this paper, we will discuss the application of BIMs collaborative integrated function in engineering construction project and BIMs future application.