Gotowe bibliografie tematyczne / Greases- Nano composite materials

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Greases- Nano composite materials”

Autor: Grafiati
Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Greases- Nano composite materials”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Greases- Nano composite materials"

1

Hu, Haitao, Xiaohong Zhang, Dingping Zhang, Junguo Gao, Chunxiu Hu i Yayun Wang. "Study on the Nonlinear Conductivity of SiC/ZnO/Epoxy Resin Micro- and Nanocomposite Materials". Materials 12, nr 5 (5.03.2019): 761. http://dx.doi.org/10.3390/ma12050761.

Pełny tekst źródła
Streszczenie:
To investigate the inhomogeneous distribution of electric fields in insulating equipment and components, five nonlinear-conductance composite materials based on epoxy resin (EP) (nano-SiC/EP, nano-ZnO/EP, micro-ZnO/EP, nano-SiC/ZnO/EP, and nano-micro-SiC/ZnO/EP), were prepared using nano-SiC, nano-ZnO, and micro-ZnO particles as fillers. The mass fractions of the inorganic fillers were 1, 3, and 5 wt%, respectively. The direct current (DC) voltage characteristics of the composites showed that the electrical conductivities and nonlinear coefficients of the composites utilizing single-filler types increased with increasing inorganic filler content. Under the same conditions, the conductivity and nonlinear coefficient of SiC/EP were both larger than those of the nano-ZnO/EP and micro-ZnO/EP. However, the nonlinear coefficient of the composites was significantly affected by the simultaneous addition of the two inorganic fillers, micro-ZnO and nano-SiC. When the content ratio of micro-ZnO to nano-SiC was 2:3, the nonlinear coefficient of the composite reached a maximum value of 3.506, significantly higher than those of the other samples. Compared with the nano-SiC/EP, micro-ZnO/EP and nano-ZnO/EP composites with 5 wt% inorganic filler, the nonlinear coefficient of the two-filler composite was greater by a factor of 0.82, 2.48, and 5.01, respectively.
Style APA, Harvard, Vancouver, ISO itp.
2

Selvam, R., S. Ravi i K. Balasubramanian. "Mechanical Testing of Plastoceramic (nPMC Sheet- SiC Reinforced Polyester Nano Composite)". International Journal of Engineering & Technology 7, nr 3.12 (20.07.2018): 1195. http://dx.doi.org/10.14419/ijet.v7i3.12.17785.

Pełny tekst źródła
Streszczenie:
Concept of nano-composite Technology has gained greater momentum in its recent engineering applications. Recent works on Nano-composite technology have proved the viability of its use and its importance in modern engineering fields of applications particularly in the field of materials and manufacture. When dissimilar materials are used with different compositions to obtain newer nano- composite materials, it has lead to the production of novel products with unique properties. In the present study, the ceramic material SiC is used as reinforcement owing to its superior properties such as hardness, thermal conductivity and strength. And this has paved the way for using it in the making of polyester nano- composite sheet (nPMC) with aforementioned properties. Fabrication and characterization of Nano-composite sheet is carried out using a weight ratio of 30% so as to understand the molecular structure and mechanical behavior under external load. The synthetic procedure and characterization used in this study has made it possible to obtain SiC nano particles reinforced polyester nano-composites (nPMC) film with good thermal strength and chemical homogeneity over the traditional composite.
Style APA, Harvard, Vancouver, ISO itp.
3

Dayı, Burak, i Fikri Öcal. "Evaluation of the effects of whitening toothpaste containing nanohydroxyapatite on surface roughness and color change in restorative materials". PeerJ 11 (14.07.2023): e15692. http://dx.doi.org/10.7717/peerj.15692.

Pełny tekst źródła
Streszczenie:
Background The effects of whitening toothpastes containing nanohydroxyapatite on the surfaces of restorative materials are not well known. This study evaluated the changes in surface roughness and color of coffee-stained restorative materials after brushing with nanohydroxyapatite and other whitening toothpastes. Methods Disc-shaped specimens were formed using microhybrid, nanohybrid, and supra-nano-filled composite (n = 30) and stained with a coffee solution. A brushing simulation was applied with toothpastes containing nanohydroxyapatite (Dentiste Plus White), perlite (Signal White System) and hydrogen peroxide (Colgate Optic White) for 7, 15, and 30 days. Color and surface roughness measurements were taken before and after brushing. Color change (∆E00) was calculated using the CIEDE2000 system. Results Supra-nano-filled composite-Dentiste Plus White, supra-nano-filled composite-Colgate Optic White, and nanohybrid composite-Signal White System were the groups with the greatest color change observed on the 7th, 15th, and 30th days, respectively. The smallest color change was seen in the microhybrid composite-Signal White System, microhybrid composite-Dentiste Plus White, and nanohybrid composite-Dentiste Plus White groups on the 7th, 15th, and 30th days, respectively. No significant surface roughness changes were observed in the nanohybrid composite-Dentiste Plus White, supra-nano-filled composite-Colgate Optic White, supra-nano-filled composite-Dentiste Plus White, or supra-nano-filled composite-Signal White System groups. Conclusions Whitening toothpaste containing nanohydroxyapatite provided a high degree of color change in the short term and did not create significant surface roughness in nanohybrid or supra-nano-filled composites.
Style APA, Harvard, Vancouver, ISO itp.
4

Liang, Ji-Zhao. "Heat distortion temperature of PPS/PC blend, PPS/PC nanocomposite and PPS/PC/GF hybrid nanocomposite". Journal of Polymer Engineering 33, nr 6 (1.09.2013): 483–88. http://dx.doi.org/10.1515/polyeng-2013-0064.

Pełny tekst źródła
Streszczenie:
Abstract The polyphenylene sulfide (PPS) blended with polycarbonate (PC), reinforced glass fiber (GF) and nanometer calcium carbonate (nano-CaCO3) filled PPS ternary composite, as well as the PPS/PC/GF/nano-CaCO3 hybrid composite, were prepared by means of a twin-screw extruder, and the heat distortion temperature (Td) of these materials was measured to identify the influence of the PC and nano-CaCO3 content on the heatproof properties. The Td values for the PPS/PC blend were lower than that of the neat PPS, when the PC weight fraction (φPC) was less than 20%, and increased with increase in φPC. The Td values for the PPS/GF/nano-CaCO3 ternary composite, on which the particle surface was treated with a titanate coupler, were higher than that of the composite with the particle surface treated with a stearate coupler. When the nano-CaCO3 weight fraction (φf) was less than 6%, the Td values for the PPS/PC/GF/nano-CaCO3 hybrid composites increased with increasing φf; at greater than the maximum of 6%, Td decreased. There was a certain synergistic effect of the GF and nano-CaCO3 on the heatproof properties in the PPS/PC composite.
Style APA, Harvard, Vancouver, ISO itp.
5

Oleiwi, Jawad Kadhim, i Qahtan Adnan Hamad. "Studying the Mechanical Properties of Denture Base Materials Fabricated from Polymer Composite Materials". Al-Khwarizmi Engineering Journal 14, nr 3 (4.09.2018): 100–111. http://dx.doi.org/10.22153/https://doi.org/10.22153/kej.2018.01.006.

Pełny tekst źródła
Streszczenie:
In this research, the effect of adding two different types of reinforcing particles was investigated, which included: nano-zirconia (nano-ZrO2) particles and micro-lignin particles that were added with different volume fractions of 0.5%, 1%, 1.5% and 2% on the mechanical properties of polymer composite materials. They were prepared in this research, as a complete prosthesis and partial denture base materials was prepared, by using cold cure poly methyl methacrylate (PMMA) resin matrix. The composite specimens in this research consist of two groups according to the types of reinforced particles, were prepared by using casting methods, type (Hand Lay-Up) method. The first group consists of PMMA resin reinforced by (nano-ZrO2) particles, while the second group consists of PMMA resin reinforced by (micro-lignin) particles. The mechanical tests performed in this research includedtensile test, compression test, impact test and hardness test. The results of this study showed that the values of tensile modulus of elasticity, compressive strength and hardness properties increased with increasing the volume fraction of these particles in PMMA composite materials. While, the values of tensile strength, elongation and impact strength properties decreased. Also, the addition of (nano-ZrO2) particles showed greater effect than that of (micro-lignin) particles in some properties of PMMA composite materials for prosthesis denture base materials specimens, while they have lower effect for the other properties.
Style APA, Harvard, Vancouver, ISO itp.
6

Oleiwi, Jawad Kadhim, i Qahtan Adnan Hamad. "Studying the Mechanical Properties of Denture Base Materials Fabricated from Polymer Composite Materials". Al-Khwarizmi Engineering Journal 14, nr 3 (4.09.2018): 100–111. http://dx.doi.org/10.22153/kej.2018.01.006.

Pełny tekst źródła
Streszczenie:
In this research, the effect of adding two different types of reinforcing particles was investigated, which included: nano-zirconia (nano-ZrO2) particles and micro-lignin particles that were added with different volume fractions of 0.5%, 1%, 1.5% and 2% on the mechanical properties of polymer composite materials. They were prepared in this research, as a complete prosthesis and partial denture base materials was prepared, by using cold cure poly methyl methacrylate (PMMA) resin matrix. The composite specimens in this research consist of two groups according to the types of reinforced particles, were prepared by using casting methods, type (Hand Lay-Up) method. The first group consists of PMMA resin reinforced by (nano-ZrO2) particles, while the second group consists of PMMA resin reinforced by (micro-lignin) particles. The mechanical tests performed in this research includedtensile test, compression test, impact test and hardness test. The results of this study showed that the values of tensile modulus of elasticity, compressive strength and hardness properties increased with increasing the volume fraction of these particles in PMMA composite materials. While, the values of tensile strength, elongation and impact strength properties decreased. Also, the addition of (nano-ZrO2) particles showed greater effect than that of (micro-lignin) particles in some properties of PMMA composite materials for prosthesis denture base materials specimens, while they have lower effect for the other properties.
Style APA, Harvard, Vancouver, ISO itp.
7

Sudha, L. K., Roy Sukumar i K. Uma Rao. "Capacitance and Glass Transition Temperature of Nano Structured Alumina Polycarbonate Composites". Applied Mechanics and Materials 446-447 (listopad 2013): 73–78. http://dx.doi.org/10.4028/www.scientific.net/amm.446-447.73.

Pełny tekst źródła
Streszczenie:
This paper describes how glass transition temperature (Tg) and capacitance (Cp) of a nanomodified composite polymer changes as compared to that of its base polymer. Because of its versatile applications, polycarbonate materials (grade PC1100 and PC1220 respectively), which are commercially available, were chosen as the base polymer in this study and nanostructured alumina material was used as filler for fabricating the desired composites by varying the filler weight in the composite materials. The Tg of the composites has been evaluated by differential scanning calorimetry (DSC) technique and Cp of the composites are derived from AC conductivity measurements of the composites. Results show that the Tg decreases as a function of filler load in the composite material whereas capacitance of the composites increase with the filler load in the composites. A filler concentration equal to or greater than 5 wt% in the said composites, the Tg of the composites reduces upto 15°C, whereas Cp shoots up in the pico-farad range with the same level of filler load, as compare to base polymers.
Style APA, Harvard, Vancouver, ISO itp.
8

Bohinc, Klemen, Erna Tintor, Davor Kovačević, Rajko Vidrih, Anamarija Zore, Anže Abram, Željka Kojić, Marija Obradović, Valentina Veselinović i Olivera Dolić. "Bacterial Adhesion on Glass–Ionomer Cements and Micro/Nano Hybrid Composite Dental Surfaces". Coatings 11, nr 2 (16.02.2021): 235. http://dx.doi.org/10.3390/coatings11020235.

Pełny tekst źródła
Streszczenie:
Dental restorations need to reproduce the aspect of the natural teeth of the patient, and must be non-toxic, biocompatible, and have good mechanical properties so that they can last for longer. The aim of this study was to determine the extent of bacterial adhesion of Streptococcus mutans on four different dental material surfaces, i.e., two glass–ionomer cements (Fuji conventional and Fuji hybrid) and two ceramic composites (Micro hybrid composite and Nano hybrid composite). To understand the bacterial adhesion on these four different dental materials, various surface properties were measured: roughness, contact angle, CIE color parameters and zeta potential. We found that the greatest adhesion extent was obtained for the Nano hybrid composite surface. The pronounced adhesion is the interplay between the relatively high roughness and hydrophilicity of the Nano hybrid composite surface. Color changes upon immersing ceramic composites in red wine and black tea proved that both beverages adhered to them. Black tea adhered more intensively than wine, and showed a higher inhibitory effect on the growth of Streptococcus mutans and Staphylococcus aureus.
Style APA, Harvard, Vancouver, ISO itp.
9

Guo, Shu Qi. "Polymer-Derived Nano-Sized SiC-Containing ZrB2 Composites: Densification, Microstructure and Flexural Strength". Solid State Phenomena 281 (sierpień 2018): 355–60. http://dx.doi.org/10.4028/www.scientific.net/ssp.281.355.

Pełny tekst źródła
Streszczenie:
Silicon carbide (SiC)-containing zirconium diboride (ZrB2) composites have become an important class of ultra-high temperature ceramic materials for the thermal protection systems of re-entry hypersonic vehicles with sharp leading edge profiles. Previous studies in ZrB2-SiC composites showed that nano-sized SiC particles-containing ZrB2 composites had a greater strength and a better oxidation resistance compared to ZrB2-beased composites with micron-sized SiC particles. However, it is difficult for obtaining a homogenous microstructural ZrB2-based composite with nano-sized SiC particles because of agglomerates of the SiC particles. In this study, homogenously dispersed nano-sized SiC particles-containing ZrB2 composites were prepared using polymer-derived SiC-dispersed ZrB2 composite powders followed by hot pressing at different temperatures between 1750°C and 1900°C. The microstructure of the resulting composites was characterized by field emission scanning electron microscopy. Four-point flexural strength of the obtained composites was measured at room temperature. The effects of the sintering temperatures and SiC content on the microstructure and the flexural strength of the composites were discussed.
Style APA, Harvard, Vancouver, ISO itp.
10

Sridhar*, Atla, i K. Prasanna Lakshmi. "Characterization and Wear Properties of Al 7075/Sic/Gr Hybrid Composites". International Journal of Innovative Technology and Exploring Engineering 9, nr 2 (30.12.2019): 2942–47. http://dx.doi.org/10.35940/ijitee.b7948.129219.

Pełny tekst źródła
Streszczenie:
In this work, dry sliding wear properties of Al 7075 Al 7075+ 5 wt.% SiC, Al7075 + 5 wt.% SiC + X wt.% graphite (X=5-10) hybrid nano-composites were developed by the principle of powdered metallurgy (P / M). Al 7075 hybrid nano-composites are highly promising materials that would be desirable for a wide range of applications. Under dry sliding conditions, the tests were carried out on a pin-on-disk machine was used to assess the loss of wear on base metal, composite and hybrid composites were calculated by different normal loads (5–20 N), and sliding speeds (0.5 – 2 m/s) and sliding distances (500–2000 m). Micro-structural examination of base metal and composites were investigated using an Optical Microscope (OM) and scanning electron microscope (SEM). The hybrid nano-composites revealed those greatest improvements in tribological results with 5 wt. % Silicon Carbide and 10 wt. % Graphite. Main wearing mechanism for hybrid composite materials has been established to form lubricating layer on both the surface and specimen. From experimental outcomes, it has been found that wear resistance tends to increase as weight percentage of the reinforcement increases.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Greases- Nano composite materials"

1

Shirolkar, Ajay. "A Nano-composite for Cardiovascular Tissue Engineering". Thesis, California State University, Long Beach, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10840053.

Pełny tekst źródła
Streszczenie:

Cardiovascular disease (CVD) is one of the largest epidemic in the world causing 800,000 annual deaths in the U.S alone and 15 million deaths worldwide. After a myocardial infarction, commonly known as a heart attack, the cells around the infarct area get deprived of oxygen and die resulting in scar tissue formation and subsequent arrhythmic beating of the heart. Due to the inability of cardiomyocytes to differentiate, the chances of recurrence of an infarction are tremendous. Research has shown that recurrence lead to death within 2 years in 10% of the cases and within 10 years in 50% of the cases. Therefore, an external structure is needed to support cardiomyocyte growth and bring the heart back to proper functioning. Current research shows that composite materials coupled with nanotechnology, a material where one of its dimension is less than or equal to 100nm, has very high potential in becoming a successful alternative treatment for end stage heart failure. The main goal of this research is to develop a composite material that will act as a scaffold to help externally cultured cardiomyocytes grow in the infarct area of the heart. The composite will consist of a poly-lactic co glycolic acid (PLGA) matrix, reinforced with carbon nanotubes. Prior research has been conducted with this same composite, however the significance of the composite developed in this research is that the nanotubes will be aligned with the help of an electro-magnetic field. This alignment is proposed to promote mechanical strength and significantly enhance proliferation and adhesion of the cardiomyocytes.

Style APA, Harvard, Vancouver, ISO itp.
2

MacGibbon, Rebecca Mary Alice. "Designer nano-composite materials with tailored adsorption and sensor properties". Thesis, University of Surrey, 2006. http://epubs.surrey.ac.uk/844469/.

Pełny tekst źródła
Streszczenie:
This thesis is concerned with the possibility of producing novel materials by the sol-gel method that could be incorporated into a new sensing system to be used for the detection of hydrocarbons, in particular methane. Possibilities for a new system include coating optical fibres, at pre-determined points, with a material that causes some sort of disruption in the signal of the fibre when in contact with a hydrocarbon or specifically methane. Dip coating an optical fibre with a sol-gel would be a method for producing an optical fibre based system. This would provide variable chemistry, refractive index and hydrocarbon sensitivity. New silica-based sol-gel materials are presented and titania is incorporated to some of these materials in order to improve the catalytic potential of the system and to increase the refractive index. In order to increase the hydrophobicity and elasticity of the final coatings, organic modifiers are added. The sol-gel materials are characterised by a variety of techniques as both monoliths and thin films. Along with the characterisation, the samples are analysed to determine their potential to adsorb methane and water and the possibility of incorporating the samples in to an optical fibre sensor system utilising ultra-violet/visible spectroscopy. The presence of titania and/or organic modifiers in a silica based sol-gel system are seen to increase significantly the extent of methane adsorption and decrease the extent of water sorption at 293-298 K. It appears that having both titania and organic modifier gives a bigger effect on adsorption than either one alone. The reasons for this are considered in detail.
Style APA, Harvard, Vancouver, ISO itp.
3

Peng, Suili. "Nano/micro particle-based functional composites and applications /". View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?NSNT%202007%20PENG.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Peters, Sarah June. "Fracture Toughness Investigations of Micro and Nano Cellulose Fiber Reinforced Ultra High Performance Concrete". Fogler Library, University of Maine, 2009. http://www.library.umaine.edu/theses/pdf/PetersSJ2009.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Zhai, Yun. "Studies on Structure and Property of Polymer-based Nano-composite Materials". ScholarWorks@UNO, 2013. http://scholarworks.uno.edu/td/1680.

Pełny tekst źródła
Streszczenie:
The mixing of polymers and nanoparticles makes it possible to give advantageous macroscopic material performance by tailoring the microstructure of composites. In this thesis, five combinations of nano inclusion and polymer matrix have been investigated. The first type of composites is titanium dioxide/ polyaniline combination. The effects of 4 different doping-acids on the microstructure, morphology, thermal stability and thermoelectric properties were discussed, showing that the sample with HCl and sulfosalicylic dual acids gave a better thermoelectric property. The second combination is titanium dioxide/polystyrene composite. Avrami equation was used to investigate the crystallization process. The best fit of the mass derivative dependence on temperature has been obtained using the double Gaussian dependence. The third combination is titanium dioxide/polyaniline/ polystyrene. In the titanium dioxide/polyaniline/ polystyrene ternary system, polystyrene provides the mechanical strength supporting the whole structure; TiO2 nanoparticles are the thermoelectric component; Polyaniline (PANI) gives the additional boost to the electrical conductivity. We also did some investigations on Polyethylene odide-TiO2 composite. The cubic anatase TiO2 with an average size of 13nm was mixed with Polyethylene-oxide using Nano Debee equipment from BEE international; Single wall carbon nanotubes were introduced into the vinyl acetate-ethylene copolymer (VAE) to form a connecting network, using high pressure homogenizer (HPH). The processing time has been reduced to 1/60 of sonication for HPH to give better sample quality. Theoretical percolation was derived according to the excluded volume theory in the expression of the threshold as a function of aspect ratio.
Style APA, Harvard, Vancouver, ISO itp.
6

Johnson, Timothy Michael. "Strain Monitoring of Carbon Fiber Composite with Embedded Nickel Nano-Composite Strain Gage". BYU ScholarsArchive, 2011. https://scholarsarchive.byu.edu/etd/2622.

Pełny tekst źródła
Streszczenie:
Carbon fiber reinforced plastic (CFRP) composites have extensive value in the aerospace, defense, sporting goods, and high performance automobile industries. These composites have huge benefits including high strength to weight ratios and the ability to tailor their properties. A significant issue with carbon fiber composites is the potential for catastrophic fatigue failure. To better understand this fatigue, there is first a huge push to measure strain accurately and in-situ to monitor carbon fiber composites. In this paper, piezoresistive nickel nanostrand (NiNs) nanocomposites were embedded in between layers of carbon fiber composite for real time, in situ strain monitoring. Several different embedding methods have been investigated. These include the direct embedding of a patch of dry NiNs and the embedding of NiNs-polymer matrix nanocomposite patches which are insulated from the surrounding carbon fiber. Also, two different polymer matrix materials were used in the nanocomposite to compare the piezoresistive signal. These nanocomposites are shown to display repeatable piezoresistivity, thus becoming a strain sensor capable of accurately measuring strain real time and in-situ. This patch has compatible mechanical properties to existing advanced composites and shows good resolution to small strain. This method of strain sensing in carbon fiber composites is more easily implemented and used than other strain measurement methods including fiber Bragg grating and acoustic emissions. To show that these embedded strain gages can be used in a variety of carbon fiber components, two different applications were also pursued.
Style APA, Harvard, Vancouver, ISO itp.
7

Liu, Liyu. "Design and fabrication of microfluidic/microelectronic devices from nano particle based composites /". View abstract or full-text, 2008. http://library.ust.hk/cgi/db/thesis.pl?NSNT%202008%20LIU.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Song, Yicheng. "The behavior and properties of ferroelectric single crystals and ferroelectric nano-composites". Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/HKUTO/record/B3955806X.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Song, Yicheng, i 宋亦誠. "The behavior and properties of ferroelectric single crystals and ferroelectric nano-composites". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B3955806X.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Ball, Jeffrey Craig. "Design and analysis of multifunctional composite structures for nano-satellites". Thesis, Cape Peninsula University of Technology, 2017. http://hdl.handle.net/20.500.11838/2572.

Pełny tekst źródła
Streszczenie:
Thesis (MTech (Mechanical Engineering))--Cape Peninsula University of Technology, 2017.
The aim of this thesis is to investigate the applications of multifunctional compos- ite (MFC) technology to nano-satellite structures and to produce a working concept design, which can be implemented on future Cube-Satellites (CubeSats). MFC tech- nologies can be used to optimise the performance of the satellite structure in terms of mass, volume and the protection it provides. The optimisation of the structure will allow further room for other sub-systems to be expanded and greater payload allowance. An extensive literature view of existing applications of MFC materials has been conducted, along with the analysis of a MFC CubeSat structural design account- ing for the environmental conditions in space and well-known design practices used in the space industry. Numerical analysis data has been supported by empirical analysis that was done where possible on the concept material and structure. The ndings indicate that the MFC technology shows an improvement over the conventional alu- minium structures that are currently being used. Improvements in rigidity, mass and internal volume were observed. Additional functions that the MFC structure o ers include electrical circuitry and connections through the material itself, as well as an increase electromagnetic shielding capability through the use of carbon- bre composite materials. Empirical data collected on the MFC samples also show good support for the numerical analysis results. The main conclusion to be drawn from this work is that multifunctional composite materials can indeed be used for nano-satellite structures and in the same light, can be tailor-made to the speci c mission requirements of the satellite. The technology is in its infancy still and has vast room for improvement and technological development beyond this work and well into the future. Further improvements and additional functions can be added through the inclusion of various other materials.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Greases- Nano composite materials"

1

Toshihiro, Yamase, i Pope Michael Thor 1933-, red. Polyoxometalate chemistry for nano-composite design. New York: Kluwer Academic/Plenum Publishers, 2002.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Little, Matthew J. Dental composites with nano-scaled fillers. Hauppauge, N.Y: Nova Science, 2010.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

T, Lau Alan K., Hussain Farzana i Lafdi Khalid, red. Nano- and biocomposites. Boca Raton: CRC Press, 2010.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Advanced polymeric materials: From macro- to nano-length scales. Toronto: Apple Academic Press, 2015.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Composites with micro- and nano-structure: Computational modeling and experiments. New York: Springer, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Mira, Mitra, red. Wavelet methods for dynamical problems: With application to metallic, composite, and nano-composite structures. Boca Raton: Taylor & Francis, 2010.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Vilgis, T. A. Reinforcement of polymer nano-composites. Cambridge: Cambride University Press, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

S, Ransing R., red. Fluid properties at nano/Meso scale: A numerical treatment. Chichester, West Sussex: John Wiley & Sons, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

S, Kaith B., Kaur Inderjeet i SpringerLink (Online service), red. Cellulose Fibers: Bio- and Nano-Polymer Composites: Green Chemistry and Technology. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2011.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

1954-, Nalwa Hari Singh, red. Handbook of organic-inorganic hybrid materials and nanocomposites. Stevenson Ranch, Calif: American Scientific Publishers, 2003.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Greases- Nano composite materials"

1

Singh, Jayant, Deepak Bhardwaj i Jitendra Kumar Katiyar. "Energy Efficient Graphene Based Nano-composite Grease". W Tribology in Materials and Applications, 95–107. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47451-5_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Haseeb, A. S. M. A. "Nano-/Microcomposites by Electrodeposition". W Composite Materials, 169–98. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-49514-8_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Schönhals, Andreas, Martin Böhning i Paulina Szymoniak. "(Nano)Composite Materials—An Introduction". W Advances in Dielectrics, 1–31. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-89723-9_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Chang, C. I., Y. N. Wang, H. R. Pei, C. J. Lee, X. H. Du i J. C. Huang. "Microstructure and Mechanical Properties of Nano-ZrO2 and Nano-SiO2 Particulate Reinforced AZ31-Mg Based Composites Fabricated by Friction Stir Processing". W Composite Materials V, 114–19. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-451-0.114.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Ohsawa, Hajime, Atsuo Ito, Yu Sogo, Atsushi Yamazaki i Tadao Ohno. "Synthesis of Albumin/DCP Nano-Composite Particles". W Key Engineering Materials, 239–42. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-422-7.239.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Ni, Xin Hua, Zhan Jun Yao, Xie Quan Liu i Jun Ying Wang. "Cracking Stress of Nano-Fibers Composite Ceramics". W Key Engineering Materials, 2432–35. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.2432.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Sah, Neeraj K., Shankab J. Phukan, Dasnur Nanjappa Madhusudan, Kamatchi Sankaranarayanan, Manas Roy i Somenath Garai. "Polyoxometalate-Induced Nano-Engineered Composite Materials". W Nanomaterials for Sustainable Energy Applications, 50–76. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003208709-3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Gaikwad, Abhishek, Kishore Debnath i Manoj Kumar Gupta. "Nano-structured Polymer-Based Composites". W Advances in Machining of Composite Materials, 335–67. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-71438-3_13.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Park, M., H. Kim, Jin Woo Lee, Kang Yong Lee, Hyun Min Kim, S. H. Moon i H. M. Lee. "Calcium Phosphate Nano-Composite with Bone Morphogenetic Protein". W Key Engineering Materials, 361–64. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-422-7.361.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Lu, Xiao Bo, Xie Quan Liu, Xin Hua Ni i Shu Qin Zhang. "Effective Stiffness of Nano and Transformation Composite Ceramics". W Key Engineering Materials, 2528–31. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.2528.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Greases- Nano composite materials"

1

Amini Manesh, Navid, Kevin R. Coffey i Ranganathan Kumar. "Experimental and Numerical Study of Dense Layered Nano-Energetic Materials". W ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-43670.

Pełny tekst źródła
Streszczenie:
This paper deals with the reaction of dense Metastable Intermolecular Composite (MIC) materials. The energy density of MIC nanocomposite materials is much higher than that of conventional energetic materials. The reaction of a multilayer thin film of aluminum and copper oxide has been studied by varying the substrate material and thicknesses, to vary the heat loss during the reaction of the MIC material. The in-plane speed of propagation of the reaction was experimentally determined using a time of-flight technique. The experiment shows that the reaction is completely quenched for a silicon substrate having an intervening silica layer of less than 200 nm. The speed of reaction seems to be constant at 40 m/s for silica layers with thickness greater than 1 μm. Different substrate material such as glass was also used. A numerical analysis of the thermal transport from the reacting film shows that the temperature profiles become self similar for substrate thicknesses larger than 1 μm., the maximum temperature stays constant for both silica and composite silica/silicon substrates, showing the effectiveness of the composite substrates to control the heat lost from the reaction, both experimentally and numerically.
Style APA, Harvard, Vancouver, ISO itp.
2

Dayananthan, C., i R. Manikandan. "Nano composite materials". W International Conference on Nanoscience, Engineering and Technology (ICONSET 2011). IEEE, 2011. http://dx.doi.org/10.1109/iconset.2011.6167927.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Jang, Jae-Soon, Joshua Varischetti, Gyo Woo Lee i Jonghwan Suhr. "Energy absorbing hybrid nano-composite materials". W SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, redaktorzy Zoubeida Ounaies i Jiangyu Li. SPIE, 2009. http://dx.doi.org/10.1117/12.815801.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Saxena, Ayush, i S. S. Godara. "Magnetic nano composite materials: A review". W 1ST INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND NANOTECHNOLOGY (ICAMEN 2019). AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5123944.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Zhang, Zhichun, Hetao Chu, Kuiwen Wang, Yanjv Liu i Jinsong Leng. "Multifunctional carbon nano-paper composite". W Fourth International Conference on Smart Materials and Nanotechnology in Engineering, redaktorzy Jayantha A. Epaarachchi, Alan Kin-tak Lau i Jinsong Leng. SPIE, 2013. http://dx.doi.org/10.1117/12.2028312.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Micciulla, F., P. Ulpiani, A. Cataldo, S. Bistarelli i S. Bellucci. "Ageing effects on composite nano carbon based materials". W 2017 International Semiconductor Conference (CAS). IEEE, 2017. http://dx.doi.org/10.1109/smicnd.2017.8101148.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Thabet, A., i Y. A. Mobarak. "Dielectric characteristics of new nano-composite industrial materials". W 2010 International Conference on High Voltage Engineering and Application (ICHVE). IEEE, 2010. http://dx.doi.org/10.1109/ichve.2010.5640767.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Koratkar, Nikhil. "Characterizing Interfacial Friction Damping in Nano-Composite Materials". W ASME 2006 Multifunctional Nanocomposites International Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/mn2006-17023.

Pełny tekst źródła
Streszczenie:
Purified multiwalled carbon nanotubes are dispersed in polycarbonate matrices using a novel solution mixing technique and dynamic load tests are performed to characterize the storage and loss modulus. Tests are also performed with pristine polycarbonate (no carbon fillers), to compare the response of the two materials. The test results indicate that as the strain amplitude is increased, the storage modulus decreases in conjunction with an increase in the loss modulus. This suggests that at large strain levels the adhesion between the nanotubes and polymer is not strong enough to prevent interfacial slip, resulting in frictional sliding at the tube-polymer interfaces. This debonding at the filler-matrix interface is responsible for the observed decrease in storage modulus and increase in loss modulus. The nanotube-polymer sliding energy dissipation mechanism shows potential to reliably and efficiently deliver high levels of structural damping to polymer structures.
Style APA, Harvard, Vancouver, ISO itp.
9

Baudot, Charles, Cher Ming Tan i Charles Wang. "Nano-tailoring of carbon nanotube as nano-fillers for composite materials applications". W 2008 2nd IEEE International Nanoelectronics Conference. IEEE, 2008. http://dx.doi.org/10.1109/inec.2008.4585552.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Merrell, A. Jake, David T. Fullwood, Anton E. Bowden, Taylor D. Remington, Dean K. Stolworthy i Adam Bilodeau. "Applications of Nano-Composite Piezoelectric Foam Sensors". W ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/smasis2013-3280.

Pełny tekst źródła
Streszczenie:
This study develops highly flexible, adaptable, portable gauges that give real-time measurements in many applications where compression is of interest. They can be embedded into elastomeric foams, and preserve the desirable physical properties of the foams in dispersing impact energy. We anticipate that these novel and inexpensive sensors will enable real-time measurement of human impacts and athletic performance based on data collected in the field, rather than the current standard of trying to replicate these experiences in the lab. In previous work, we have validated the performance of tensile strain sensors based on a similar technology embedded in thin sheets of silicone. These sensors are capable of measuring up to 50% strains in real time with minimal interference in tissue motion. With the addition of the sensors described in the present work, it is possible to measure both tensile and compressive strains.
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Greases- Nano composite materials"

1

Wang, Qi. Hydrodynamics of Macromolecular and Nano-Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, sierpień 2005. http://dx.doi.org/10.21236/ada437262.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Liu, C. T. Multi-Scale Approach to Investigate the Tensile and Fracture Behavior of Nano Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, sierpień 2005. http://dx.doi.org/10.21236/ada439722.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Liu, Chi T. Multi-Scale Approach to Investigate the Tensile and Fracture Behavior of Nano Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 2005. http://dx.doi.org/10.21236/ada443333.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Liu, C. T. Multi-Scale Approach to Investigate the Tensile and Fracture Behavior of Nano Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, czerwiec 2004. http://dx.doi.org/10.21236/ada427077.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Jarosz, Paul, i Paul Kladitis. Scale-up of Next Generation Nano-Enhanced Composite Materials for Longer Lasting Consumer Goods. Office of Scientific and Technical Information (OSTI), luty 2020. http://dx.doi.org/10.2172/1601628.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Daniel, Claus, Beth L. Armstrong, L. Curt Maxey, Adrian S. Sabau, Hsin Wang, Patrick Hagans i Sue Babinec. Final Report - Recovery Act - Development and application of processing and process control for nano-composite materials for lithium ion batteries. Office of Scientific and Technical Information (OSTI), sierpień 2013. http://dx.doi.org/10.2172/1095726.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Daniel, C., B. Armstrong, C. Maxey, A. Sabau, H. Wang, P. Hagans i S. and Babinec. CRADA Final Report for NFE-08-01826: Development and application of processing and processcontrol for nano-composite materials for lithium ion batteries. Office of Scientific and Technical Information (OSTI), grudzień 2012. http://dx.doi.org/10.2172/1059845.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Barnes, Eftihia, Jennifer Jefcoat, Erik Alberts, Hannah Peel, L. Mimum, J, Buchanan, Xin Guan i in. Synthesis and characterization of biological nanomaterial/poly(vinylidene fluoride) composites. Engineer Research and Development Center (U.S.), wrzesień 2021. http://dx.doi.org/10.21079/11681/42132.

Pełny tekst źródła
Streszczenie:
The properties of composite materials are strongly influenced by both the physical and chemical properties of their individual constituents, as well as the interactions between them. For nanocomposites, the incorporation of nano-sized dopants inside a host material matrix can lead to significant improvements in mechanical strength, toughness, thermal or electrical conductivity, etc. In this work, the effect of cellulose nanofibrils on the structure and mechanical properties of cellulose nanofibril poly(vinylidene fluoride) (PVDF) composite films was investigated. Cellulose is one of the most abundant organic polymers with superior mechanical properties and readily functionalized surfaces. Under the current processing conditions, cellulose nanofibrils, as-received and 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) oxidized, alter the crystallinity and mechanical properties of the composite films while not inducing a crystalline phase transformation on the 𝛾 phase PVDF composites. Composite films obtained from hydrated cellulose nanofibrils remain in a majority 𝛾 phase, but also exhibit a small, yet detectable fraction of 𝛼 and ß PVDF phases.
Style APA, Harvard, Vancouver, ISO itp.
9

Kennedy, Alan, Andrew McQueen, Mark Ballentine, Brianna Fernando, Lauren May, Jonna Boyda, Christopher Williams i Michael Bortner. Sustainable harmful algal bloom mitigation by 3D printed photocatalytic oxidation devices (3D-PODs). Engineer Research and Development Center (U.S.), kwiecień 2022. http://dx.doi.org/10.21079/11681/43980.

Pełny tekst źródła
Streszczenie:
The impacts of Harmful Algal Blooms (HAB), often caused by cyanobacteria (Figure 1), on water resources are increasing. Innovative solutions for treatment of HABs and their associated toxins are needed to mitigate these impacts and decrease risks without introducing persistent legacy contaminants that cause collateral ecosystem impacts. This technical note (TN) identifies novel opportunities enabled by Additive Manufacturing (AM), or 3D printing, to produce high surface area advanced material composites to rapidly prototype sustainable environmental solutions for aquatic nuisance species control. This innovative research explores deployment of 3D-printable polymer composite structures containing nano-scale photocatalysts for targeted open water treatment of HABs that are customizable to the site-of-concern and also retrievable, reusable, and sustainable. The approach developed to control cyanobacteria HAB events has the potential to augment or replace broadcast, non-specific chemical controls that otherwise put non-target species and ecological resources at long-term risk. It can also augment existing UV-treatment HAB treatment control measures. The expected research outcome is a novel, effective, and sustainable HAB management tool for the US Army Corps of Engineers (USACE) and resource managers to deploy in their HAB rapid response programs. The research will provide a framework for scale-up into other manufacturing methods (e.g., injection molding) to produce the devices in bulk (quickly and efficiently). Research for this project title “Mitigation of Harmful Algal Bloom Toxins using 3D Printed Photocatalytic Materials (FY21-23)” was sponsored by the US Army Engineer Research Development Center’s (ERDC) Aquatic Nuisance Species Research Program (ANSRP).
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Greases- Nano composite materials” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii