Gotowa bibliografia na temat „Graphene Nano-sheets”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Graphene Nano-sheets”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Graphene Nano-sheets"
Fauchard, Mélissa, Sébastien Cahen, Philippe Lagrange, Jean-François Marêché i Claire Hérold. "Gold nano-sheets intercalated between graphene planes". Carbon 65 (grudzień 2013): 236–42. http://dx.doi.org/10.1016/j.carbon.2013.08.019.
Pełny tekst źródłaBansal, Suneev Anil, Amrinder Pal Singh, Anil Kumar, Suresh Kumar, Navin Kumar i Jatinder Kumar Goswamy. "Improved mechanical performance of bisphenol-A graphene-oxide nano-composites". Journal of Composite Materials 52, nr 16 (13.11.2017): 2179–88. http://dx.doi.org/10.1177/0021998317741952.
Pełny tekst źródłaTrusova, Elena A., Dmitrii D. Titov, Asya M. Afzal i Sergey S. Abramchuk. "Influence of Graphene Sheets on Compaction and Sintering Properties of Nano-Zirconia Ceramics". Materials 15, nr 20 (20.10.2022): 7342. http://dx.doi.org/10.3390/ma15207342.
Pełny tekst źródłaAfzal, A. M., E. A. Trusova i A. A. Konovalov. "Obtaining hybrid nanostructures based on graphene and nano-ZrO2". Perspektivnye Materialy 10 (2022): 52–63. http://dx.doi.org/10.30791/1028-978x-2022-10-52-63.
Pełny tekst źródłaYengejeh, Sadegh Imani, Seyedeh Alieh Kazemi, Oleksandr Ivasenko i Andreas Öchsner. "Simulations of Graphene Sheets Based on the Finite Element Method and Density Functional Theory: Comparison of the Geometry Modeling under the Influence of Defects". Journal of Nano Research 47 (maj 2017): 128–35. http://dx.doi.org/10.4028/www.scientific.net/jnanor.47.128.
Pełny tekst źródłaSiburian, R., H. Sihotang, S. Lumban Raja, M. Supeno i C. Simanjuntak. "New Route to Synthesize of Graphene Nano Sheets". Oriental Journal of Chemistry 34, nr 1 (25.02.2018): 182–87. http://dx.doi.org/10.13005/ojc/340120.
Pełny tekst źródłaSiburian, Rikson, Dewiratih Dewiratih, Andiayani Andiayani, Sabarmin Perangin-Angin, Helmina Sembiring, Herlince Sihotang, Saur Lumban Raja i in. "Facile Method to Synthesize N-Graphene Nano Sheets". Oriental Journal of Chemistry 34, nr 4 (25.08.2018): 1978–83. http://dx.doi.org/10.13005/ojc/3404035.
Pełny tekst źródłaAl-Tamimi, B. H., S. B. H. Farid i F. A. Chyad. "Modified Unzipping Technique to Prepare Graphene Nano-Sheets". Journal of Physics: Conference Series 1003 (maj 2018): 012020. http://dx.doi.org/10.1088/1742-6596/1003/1/012020.
Pełny tekst źródłaDey, Abhijit, Vinit Nangare, Priyesh V. More, Md Abdul Shafeeuulla Khan, Pawan K. Khanna, Arun Kanti Sikder i Santanu Chattopadhyay. "A graphene titanium dioxide nanocomposite (GTNC): one pot green synthesis and its application in a solid rocket propellant". RSC Advances 5, nr 78 (2015): 63777–85. http://dx.doi.org/10.1039/c5ra09295g.
Pełny tekst źródłaRivera, Jose L., Francisco Villanueva-Mejia, Pedro Navarro-Santos i Francis W. Starr. "Desalination by dragging water using a low-energy nano-mechanical device of porous graphene". RSC Advances 7, nr 85 (2017): 53729–39. http://dx.doi.org/10.1039/c7ra09847b.
Pełny tekst źródłaRozprawy doktorskie na temat "Graphene Nano-sheets"
Wang, S. Q. "Car-Parrinello Molecular Dynamics of Nanosized Graphene Sheets". Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35242.
Pełny tekst źródłaHolliday, Nathan. "Processing and Properties of SBR-PU Bilayer and Blend Composite Films Reinforced with Multilayered Nano-Graphene Sheets". University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1458300045.
Pełny tekst źródłaChi-HuaHsu i 徐啟華. "Characterization and Optimal Design of Graphene Sheets on Micro/Nano Actuators". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/70913433104122613605.
Pełny tekst źródła國立成功大學
機械工程學系
103
With the rapid growth of semiconductor process technologies, micro / nano-electromechanical systems is well developed. Nowadays, the conventional semiconductor device can’t meet the requirements because of its weight, bulk and high power consumption. The application of micro / nano electromechanical technology to achieve functional integration, bandwidth, low signal loss and small size requirements is used to solve this problem. Graphene have excellent chemical and machinery stability and it’s suitable for the application of micro / nano components in high speed, high sensitivity and high current density. This paper shows systematic analysis and design methods for actuator electrodes of electrostatic driving micro actuator, and further discuss about the graphene sheet as the basic element. Meshfree method with no grid dependence, it is only necessary to know the information of node location. It is easy to analyze the data. Thus, we adopted EFGM as our methods. Finally apply an electrostatic force and nonlocal elastically theory to observe the changes in the structure of the graphene. Simulation results show that: through the nonlocal parameters and electrostatic driving will cause reduction of frequency in the structure. By the EFGM analysis, it can be observed that method provides not only the value of voltage rapidly which arise adsorption phenomena but also reduces the cost of experiments. The value could be as a reference to company.
Srinivasanaik, Azmeera. "AFM and STM Characterization of Electrochemically Synthesized Few-Layer Graphene Nano-Sheets". Thesis, 2018. http://ethesis.nitrkl.ac.in/9579/1/2018_MT_216MM1425_ASrinivasanaik_AFM.pdf.
Pełny tekst źródłaLiu, Cheng-Hao, i 劉承浩. "Synthesis and Optoelectronic Properties of Poly(fluorene-alt-thiophene) Comprising Nano Graphene Sheets". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/36731003518401988063.
Pełny tekst źródła國立中正大學
化學工程所
97
Graphite was acidified to convert to graphite oxide via the Hummers method, and the resulting exfoliated graphite oxide sheets were reduced by phenylhydrazine in the presence of conjugated polymer PDOFT to form the PDOFT/GS polymeric nanocomposite. This novel polymeric nanocomposite was characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, atomic force microscope, scanning electron microscopy, transmission electron microscope, UV/Vis spectroscopy, photoluminescence spectroscopy and various optoelectronic instruments. TGA and DSC analyses indicate that all polymeric nanocomposites are thermally stable up to 400℃ without detectable melting points. By introducing graphene sheets into the polymer matrix, the threshold voltage of the PLED device is lowered and both of the current efficiency and the carrier mobility were improved.
Chiou, Po-Jiun, i 邱柏鈞. "Synthesis and Optoelectronic Properties of Poly fluorene-block-polythiophene Comprising Nano Graphene Sheets". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/02517459316046375324.
Pełny tekst źródła國立中正大學
化學工程所
98
Graphite was acidified to convert to graphite oxide via the Hummers method, and the resulting exfoliated graphite oxide sheets were reduced by octadecylamine in the presence of conjugated polymer PF-b-P3HT to form the PF-b-P3HT/Gr polymeric nanocomposite. This novel polymeric nanocomposite was characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy, atomic force microscope, scanning electron microscopy, transmission electron microscope, UV/Vis spectroscopy, photoluminescence spectroscopy and various optoelectronic instruments. TGA and DSC analyses indicated that all polymeric nanocomposites were thermally stable up to 400℃ with the glass transition temperature being to 150℃. And the melting point being 230℃.By introducing graphene sheets into the polymer matrix, the threshold voltage of the PLED device was lowered and both of the current efficiency and the carrier mobility were improved.
Yang, Chih-Yu, i 楊芷瑀. "Preparation and Characterization of Graphene Nano Sheets/Waterborne Polyurethane Nanocomposite for Electromagnetic Interference Shielding". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/459r4t.
Pełny tekst źródła國立清華大學
化學工程學系
103
The aim of this study is to prepare the electromagnetic interference shielding (EMI SE) polymer composite by two-dimentional Graphene Nano Sheets (GNS) and Waterborne Polyurethane (WPU) via solution mixing method. This study includes two parts. In the first part, graphene oxide (GO) was prepared from graphite by modified Hummers’ method, and then was reduced to GNS by NaBH4. In order to improve the dispersion and to prevent the restacking and aggregations of GNS during reduction, [2-(Methacryloyloxy)-ethyl]- trimethyl ammonium chloride (AETAC) was grafted onto the GO and GNS surface by free radical polymerization to form FGO and FGNS. FGO was reduced to FRGO by chemical reduction with NaBH4. According to the results of analysis of XRD, XPS and TEM, it was confirmed that AETAC was grafted onto GO and GNS surface. A simple solution mixing method was used to prepare GNS/WPU, FGNS/WPU and FRGO/WPU composite with 1, 3, 5 and 10 wt% filler content. The electrical conductivity of GNS/WPU (FGNS/WPU and FRGO/WPU) composites was increased with the filler content. The results showed that the highest electrical conductivity of 2.07 S/cm and EMI shielding effectiveness (EMI SE) of approximately 17 dB in the frequency of 8.2–12.4 GHz (X-band) were obtained by the 10 wt% filler content of FRGO/WPU composite. In the second part, in order to increase the electrical conductivity and EMI SE of composites, silver nanoparticles (Ag NPs) were deposited on the FRGO surfaces to form Ag@FRGO. The different weight ratios of Ag NPs to FRGO were 1:1, 1:3, 1:5 and 1:10, which formed 1Ag@FRGO, 3Ag@FRGO, 5Ag@FRGO and 10Ag@FRGO. A simple solution mixing method was used to prepare Ag@FRGO/WPU composites with 10 wt% filler content and different weight ratios of Ag NPs to FRGO. Results showed that the electrical conductivity and EMI SE of Ag@FRGO/WPU composites were increased with the increasing weight ratio of Ag NPs to FRGO. The highest electrical conductivity and EMI SE of 10Ag@FRGO/WPU composite over the frequency of 8.2–12.4 GHz were improved to 25.5 S/cm and 35 dB, respectively.
Arash, Behrouz. "Molecular dynamics studies on application of carbon nanotubes and graphene sheets as nano-resonator sensors". 2013. http://hdl.handle.net/1993/22278.
Pełny tekst źródła黃郁芩. "Preparation and Characterization of Graphene Nano sheets/Waterborne Polyurethane Nanocomposites for Electromagnetic Interference Shielding via Self-Assembly Process". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/we5y8s.
Pełny tekst źródłaFan, Yang-chun, i 范揚均. "Morphology, electrical conductivity, crystalline property of high density polyethylene/polyamide/graphene nano sheets composites prepared by melt-compounding". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/06366971148305821535.
Pełny tekst źródła逢甲大學
纖維與複合材料學系
104
This study focused on the morphology change of immiscible polymer, high-density polyethylene(HDPE) and polyamide 6(PA blends with the incorporation of GNSs to produce double double percolation, to find the direct relationship between the GNS content with compatibilizer introduce of blends and the network structure of GNSs. The conductivities of HDPE/PA6 composites filled with different amounts of GNS were measured by 4-point Probe and Source meter. The morphologies, GNS dispersion and crystallization behavior of HDPE/PA6/GNS composites were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC). Analysis the ratio 50/50 HDPE/PA6 will produce co-continuous morphology by SEM and TEM, different content GNSs bring about morphology change. The GNSs located in HDPE/PA6 phases form conductive network, we find the double percolation bring in 3wt% and 5wt% of HDPE/PA6-6N/GNS and HDPE/PA6-10k/GNS, Incorporate the HDPE-g-MA will more improve the conductivity of HDPE/HDPE-g-MA/PA6-6N/GNS-M in 5wt%.
Części książek na temat "Graphene Nano-sheets"
Jungen, Alain. "Nano-spectroscopy of Individual Carbon Nanotubes and Isolated Graphene Sheets". W Confocal Raman Microscopy, 157–76. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-75380-5_7.
Pełny tekst źródłaJungen, Alain. "Nano-spectroscopy of Individual Carbon Nanotubes and Isolated Graphene Sheets". W Confocal Raman Microscopy, 91–109. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12522-5_5.
Pełny tekst źródłaNaseem, Z., K. Sagoe-Crentsil i W. Duan. "Graphene-Induced Nano- and Microscale Modification of Polymer Structures in Cement Composite Systems". W Lecture Notes in Civil Engineering, 527–33. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_56.
Pełny tekst źródłaDas, Barsha, Sagnik Das, Soumyabrata Tewary, Sujoy Bose, Sandip Ghosh i Avijit Ghosh. "Graphene Nano Sheets for the Fuel Cell Applications". W Advances in Nanosheets [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.1001838.
Pełny tekst źródłaKondo, Hiroki, Masaru Hori i Mineo Hiramatsu. "Nucleation and Vertical Growth of Nano-Graphene Sheets". W Graphene - Synthesis, Characterization, Properties and Applications. InTech, 2011. http://dx.doi.org/10.5772/23703.
Pełny tekst źródłaIkram, Muhammad, Ali Raza, Atif Shahbaz, Haleema Ijaz, Sarfraz Ali, Ali Haider, Muhammad Tayyab Hussain, Junaid Haider, Arslan Ahmed Rafi i Salamat Ali. "Carbon Nanotubes". W Sol Gel and other Fabrication Methods of Advanced Carbon Materials [Working Title]. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.95442.
Pełny tekst źródła"Self Assembly and Building Nano Structures". W Polymer Structure Characterization: From Nano to Macro Organization in Small Molecules and Polymers, 393–424. Wyd. 2. The Royal Society of Chemistry, 2013. http://dx.doi.org/10.1039/bk9781849734332-00393.
Pełny tekst źródłaVijay, Manish Kumar, i Radheshyam Sharma. "Carbon Nano Tubes (CNTs) as a Tool of Seed Quality Enhancement Using Nanopriming Approach". W Nanopriming Approach to Sustainable Agriculture, 90–109. IGI Global, 2023. http://dx.doi.org/10.4018/978-1-6684-7232-3.ch004.
Pełny tekst źródłaMuñoz, Roberto, Mar García-Hernández i Cristina Gómez-Aleixandre. "CVD of Carbon Nanomaterials: From Graphene Sheets to Graphene Quantum Dots". W Handbook of Carbon Nano Materials, 127–83. WORLD SCIENTIFIC, 2015. http://dx.doi.org/10.1142/9789814678919_0004.
Pełny tekst źródłaBalachandran, Manoj. "Extraction of Preformed Mixed Phase Graphene Sheets from Graphitized Coal by Fungal Leaching". W Handbook of Research on Inventive Bioremediation Techniques, 287–99. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-2325-3.ch012.
Pełny tekst źródłaStreszczenia konferencji na temat "Graphene Nano-sheets"
Siburian, Rikson, i Oktavian Silitonga. "Performance of primary battery prototype: Cu/graphene nano sheets//electrolyte//C-π (graphite, graphene nano sheets, n–graphene nano sheets)". W THE 9TH INTERNATIONAL CONFERENCE OF THE INDONESIAN CHEMICAL SOCIETY ICICS 2021: Toward a Meaningful Society. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0104014.
Pełny tekst źródłaYe, J., Y. Zhang, M. Yoshida, Y. Saito i Y. Iwasa. "Transistors on Nano-sheets Beyond Graphene". W 2013 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2013. http://dx.doi.org/10.7567/ssdm.2013.c-6-1.
Pełny tekst źródłaSihotang, Herlince, Rikson Siburian, Crystina Simanjuntak, Saur Lumban Raja, Minto Supeno, Vivi Sukmawati i Zul Alfian. "Formation Process of Graphene Nano Sheets". W International Conference on Chemical Science and Technology Innovation. SCITEPRESS - Science and Technology Publications, 2019. http://dx.doi.org/10.5220/0008839400360038.
Pełny tekst źródłaChen, Zhen, Wanyoung Jang, Wenzhong Bao, Chun Ning Lau i Chris Dames. "Heat Transfer in Encased Graphene". W ASME 2009 Heat Transfer Summer Conference collocated with the InterPACK09 and 3rd Energy Sustainability Conferences. ASMEDC, 2009. http://dx.doi.org/10.1115/ht2009-88370.
Pełny tekst źródłaWang, Huabin, Jonathan J. Wilksch, Richard A. Strugnell i Haijun Yang. "Interrogate the antibacterial activities of nano graphene oxide sheets". W 2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2016. http://dx.doi.org/10.1109/3m-nano.2016.7824976.
Pełny tekst źródłaIllera, Danny, Chatura Wickramaratne, Diego Guillen, Chand Jotshi, Humberto Gomez i D. Yogi Goswami. "Stabilization of Graphene Dispersions by Cellulose Nanocrystals Colloids". W ASME 2018 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/imece2018-87830.
Pełny tekst źródłaPasaribu, Elsa, Rikson Siburian, Minto Supeno i Mita Manalu. "Performance of primary battery prototype: Nickel/graphene nano sheets (GNS)//electrolyte//graphite and GNS". W THE II INTERNATIONAL SCIENTIFIC CONFERENCE “INDUSTRIAL AND CIVIL CONSTRUCTION 2022”. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0136012.
Pełny tekst źródłaArsat, R., M. Breedon, M. Shafiei, K. Kalantar-zadeh, W. Wlodarski, S. Gilje, R. B. Kaner i F. J. Arregui. "Graphene-like nano-Sheets/36° LiTaO3 surface acoustic wave hydrogen gas sensor". W 2008 IEEE Sensors. IEEE, 2008. http://dx.doi.org/10.1109/icsens.2008.4716414.
Pełny tekst źródłaSiburian, Rikson, Herlince Sihotang, Saur Lumban Raja, Minto Supeno, Crystina Simanjuntak i Hana Manurung. "Nanometers Formation Model of Iron (Fe) and Magnesium (Mg) on Graphene Nano Sheets". W International Conference on Chemical Science and Technology Innovation. SCITEPRESS - Science and Technology Publications, 2019. http://dx.doi.org/10.5220/0008838600260029.
Pełny tekst źródłaSadri, Mehran, Davood Younesian i Ebrahim Esmailzadeh. "Application of Variational Iteration Method in Nonlinear Free Vibration Analysis of Multi-Layered Nano-Scale Graphene Sheets". W ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-38957.
Pełny tekst źródła