Rozprawy doktorskie na temat „Functionally graded materials (FGMs)”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Functionally graded materials (FGMs)”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Tilbrook, Matthew Thomas Materials Science & Engineering Faculty of Science UNSW. "Fatigue crack propagation in functionally graded materials". Awarded by:University of New South Wales. Materials Science & Engineering, 2005. http://handle.unsw.edu.au/1959.4/21885.
Pełny tekst źródłaPratapa, Suminar. "Synthesis and character of a functionally-graded aluminium titanate/zirconia-alumina composite". Thesis, Curtin University, 1997. http://hdl.handle.net/20.500.11937/988.
Pełny tekst źródłaPratapa, Suminar. "Synthesis and character of a functionally-graded aluminium titanate/zirconia-alumina composite". Curtin University of Technology, Department of Applied Physics, 1997. http://espace.library.curtin.edu.au:80/R/?func=dbin-jump-full&object_id=14696.
Pełny tekst źródłaRelatively lower thermal expansion and softer surface layer in comparison to those of the core (TEC value of 5.9 x 10(subscript)-6 degrees celsius(subscript)-1 and microhardness of 6 GPa compared to 7.4 x 10(subscript)-6 degrees celsius(subscript)-1 and 12 GPa, respectively) render possibilities to implement the material to which thermal shock resistance surface but hard core, such as a metal melting crucible, are required. Load-dependent microhardness was obviously observed on the surface of the material but only slight dependence was observed in the core. This observation indicated that the material exhibit "quasi-ductile" surface but brittle core. In comparison to the reference specimen, the FGM displayed damage-tolerance and remarkable machinability.
Arman, Eyup Erhan. "Jk-integral Formulation And Implementation For Thermally Loaded Orthotropic Functionally Graded Materials". Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/3/12610136/index.pdf.
Pełny tekst źródłaDESHMUKH, PUSHKARAJ M. "MODELING ERROR ESTIMATION AND ADAPTIVE MODELING OF FUNCTIONALLY GRADED MATERIALS". University of Cincinnati / OhioLINK, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1096036755.
Pełny tekst źródłaOkubo, Hitoshi, Hideki Shumiya, Masahiro Ito i Katsumi Kato. "Insulation Performance of Permittivity Graded FGM (Functionally Graded Materials) in SF6 Gas under Lightning Impulse Conditions". IEEE, 2006. http://hdl.handle.net/2237/9496.
Pełny tekst źródłaKosker, Sadik. "Three Dimensional Mixed Mode Fracture Analysis Of Functionally Graded Materials". Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/12608795/index.pdf.
Pełny tekst źródła#8211
aluminum&
#8211
zirconium (NiCrAlY) bond coat between the FGM coating and substrate. Metal-rich, linear variation, ceramic-rich and homogeneous ceramic FGM coating types are considered in the analyses. The inclined semi-elliptic surface crack problem in the FGM coating-bond coat-substrate system is analyzed under transient thermal loading. This problem is modeled and analyzed by utilizing three dimensional finite elements. Strain singularity around the crack front is simulated using collapsed 20 &
#8211
node quarter &
#8211
point brick elements. Three &
#8211
dimensional displacement correlation technique is utilized to extract the mixed mode stress intensity factors around the crack front for different inclination angles of the semi-elliptic surface crack. The energy release rates around the crack front are also calculated by using the evaluated mixed mode stress intensity factors. The results obtained in this study are the peak values of mixed mode stress intensity factors and energy release rates around the crack front for various inclination angles of the semi-elliptic surface crack embedded in the FGM coating of the composite structure subjected to transient thermal loading.
Hosseinzadeh, Delandar Arash. "Finite element analysis of thermally induced residual stresses in functionally graded materials". Thesis, KTH, Materialvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-92519.
Pełny tekst źródłaMellachervu, Krishnaveni. "Study of the honeycomb structures and functionally graded materials using the BEM and FEM". Cincinnati, Ohio : University of Cincinnati, 2008. http://rave.ohiolink.edu/etdc/view.cgi?acc_num=ucin1206460053.
Pełny tekst źródłaAdvisor: Yijun Liu. Title from electronic thesis title page (viewed Feb.25, 2009). Includes abstract. Keywords: Honeycomb; FGM; BEM; FEM. Includes bibliographical references.
Sivakumar, V. "Processing, Characterization And Evaluation Of A Functionally Graded Ai - 4.6% Cu Alloy". Thesis, Indian Institute of Science, 2000. https://etd.iisc.ac.in/handle/2005/183.
Pełny tekst źródłaSivakumar, V. "Processing, Characterization And Evaluation Of A Functionally Graded Ai - 4.6% Cu Alloy". Thesis, Indian Institute of Science, 2000. http://hdl.handle.net/2005/183.
Pełny tekst źródłaThomas, Gareth James. "Advanced materials for plasma facing components in fusion devices". Thesis, University of Oxford, 2009. http://ora.ox.ac.uk/objects/uuid:f8ba1ae1-f303-4c32-877e-dca421a3cb5c.
Pełny tekst źródłaOdorczyk, Marcos Fernando. "Uma estratégia numérica para análise termoelástica de sólidos recobertos com filmes de material funcionalmente gradado (FGM)". Universidade do Estado de Santa Catarina, 2011. http://tede.udesc.br/handle/handle/1796.
Pełny tekst źródłaCoordenação de Aperfeiçoamento de Pessoal de Nível Superior
The finite element method has been traditionally applied in solving problems of elasticity and heat transfer, being widely used in cases with homogeneous isotropic materials. With the advent of new technologies, it has been more frequent to use components with more than one material, aiming to get the most out of each phase. A common example is the application of coating films, with optimal properties, on a substrate. These coating films may be homogeneous or functionally graded (FGM). The latter presents a continuous variation of properties through the geometry, allowing to reduce differences at the interface with the substrate. It is important to analyze the behavior of stresses along the interface between film and substrate, a region prone for the occurrence of failure. As current commercial finite element programs have limitations to handle FGM's, especially at the interfaces, one of the motivations of this dissertation is to develop a method for stress and flux nodal recovery, adequate to work with this type of material. The work presents the analysis of a component made of steel or aluminum coated with a titanium nitride film (homogeneous or FGM) under thermo-mechanical loading. The thermal part of the problem is set in an Eulerian description, leading to heat transfer by conduction and convection in the solid. The mechanical (elasticity) part is set in the usual Lagrangean description. A staggered thermo-mechanical approach is implemented and promising results are obtained.
O método de elementos finitos tem sido tradicionalmente aplicado na solução de problemas de elasticidade e transferência de calor, sendo amplamente utilizado em casos com materiais homogêneos e isotrópicos. Com o advento de novas tecnologias tem sido mais freqüente a utilização de componentes com mais de um material, onde se procura obter o máximo proveito de cada fase. Um exemplo comum é a aplicação de filmes de revestimento com propriedades ótimas sobre um substrato. Estes filmes de revestimento podem ser homogêneos ou funcionalmente gradados (FGM), sendo que o último tem variação continua de propriedades ao longo da geometria, permitindo atenuar diferenças na interface com o substrato. A análise do comportamento das tensões ao longo da interface entre filme e substrato é de suma importância, pois esta é uma região potencial para ocorrência de falhas. Dado que programas comerciais de elementos finitos atuais apresentam limitações para lidar com FGM s, principalmente na região de interface, uma das motivações desta dissertação é desenvolver um método de pós-processamento de tensões e fluxos capaz de trabalhar adequadamente com este tipo de material. O trabalho apresenta a análise de um componente de aço ou alumínio revestido com filme de nitreto de titânio (homogêneo ou funcionalmente gradado), sob carregamento termomecânico. A parte térmica do problema é descrita usando uma abordagem Euleriana, que resulta em condução de calor por convecção e condução no sólido. A parte mecânica (elasticidade) é descrita pela tradicional abordagem Lagrangeana. Um procedimento de solução termomecânica aninhada (staggered) é implementado e resultados promissores são obtidos.
Jivkov, Andrey P. "On crack growth in functionally graded materials". Licentiate thesis, Luleå tekniska universitet, 1999. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-25814.
Pełny tekst źródłaGodkänd; 1999; 20070320 (ysko)
Hauber, Brett Kenneth. "Fatigue Crack Propagation in Functionally Graded Materials". University of Dayton / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1259881312.
Pełny tekst źródłaHeidari, Maryam. "3D modelling of functionally graded coatings". Thesis, University of Aberdeen, 2014. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?pid=215382.
Pełny tekst źródłaYilmaz, Suphi. "Buckling Driven Delamination Of Orthotropic Functionally Graded Materials". Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/3/12607836/index.pdf.
Pełny tekst źródłas technology severe working conditions increase demands on structural materials. A class of materials which are developed to meet these increased demands is Functionally Graded Materials (FGMs). These are inhomogeneous structural materials which are able to withstand large temperature gradients and corrosive environment. Application areas of FGMs are in aerospace industry, nuclear reactors, chemical plants and turbine systems. FGMs have gradual compositional variation from metal to ceramic which give them mechanical strength, toughness and heat resistance. However under high temperature gradients, cracking problems may arise due to thermal stresses. In layered structures the final stage of failure may be delamination due to crack extension. The objective of this study is to model a particular type of crack problem in a layered structure consisting of a substrate, a bond coat and an orthotropic FGM coating. There is an internal crack in the orthotropic layer and it is perpendicular to material gradation of coating. The position of the crack inside the coating is kept as a variable. The steady-state temperature distribution between the substrate and the coating causes a buckled shape along crack face. The critical temperature change, temperature distribution, mixed mode stress intensity values and energy release rates are calculated by using Displacement Correlation Technique. Results of this study present the effects of geometric parameters such as crack length, crack position, etc as well as the effects of the type of gradation on buckling behavior and mixed mode stress intensity factors.
Boidot, Mathieu. "Élaboration de revêtements γ-γ' et de systèmes barrière thermique par Spark Plasma Sintering : tenue au cyclage thermique et propriétés d’usage". Phd thesis, Toulouse, INPT, 2010. http://oatao.univ-toulouse.fr/11972/1/boidot.pdf.
Pełny tekst źródłaSarikaya, Duygu. "Mixed-mode Fracture Analysis Of Orthotropic Functionally Graded Materials". Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12606451/index.pdf.
Pełny tekst źródłaSabuncuoglu, Baris. "Fatigue Crack Growth Analysis Models For Functionally Graded Materials". Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12607024/index.pdf.
Pełny tekst źródłainfluence for a certain number of cyclic loading.
Imery, Buiza Jesus Alberto. "Fracture behaviour of 2124 A1-SiC functionally graded materials". Thesis, Imperial College London, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321715.
Pełny tekst źródłaSoncco, K., X. Jorge i R. A. Arciniega. "Postbuckling Analysis of Functionally Graded Beams". Institute of Physics Publishing, 2019. http://hdl.handle.net/10757/625602.
Pełny tekst źródłaRevisión por pares
Awrejcewicz, Jan, Lidiya Kurpa i T. Shmatko. "Vibration of functionally graded shallow shells with complex shape". Thesis, Department of Automation, Biomechanics and Mechatronics, 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/37081.
Pełny tekst źródłaWang, Xuan. "Synthesis of functionally graded materials via electrophoretic deposition and sintering /". Diss., Connect to a 24 p. preview or request complete full text in PDF formate. Access restricted to UC campuses, 2006. http://wwwlib.umi.com/cr/ucsd/fullcit?p3208812.
Pełny tekst źródłaBell, Bryan Frederick Jr. "Functionally graded, multilayer diamondlike carbon-hydroxyapatite nanocomposite coatings for orthopedic implants". Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/7962.
Pełny tekst źródłaOyekoya, Oyedele. "Structural integrity of engineering components made of functionally graded materials". Thesis, Cranfield University, 2008. http://dspace.lib.cranfield.ac.uk/handle/1826/3802.
Pełny tekst źródłaALBINO, JUAN CARLOS ROMERO. "FUNCTIONALLY GRADED MATERIALS ON THE DYNAMIC BEHAVIOR OF FLEXIBLE RISERS". PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2011. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=19447@1.
Pełny tekst źródłaNeste trabalho um novo elemento de viga co-rotacionado é apresentado para a análise não-linear geométrica tridimensional, estática e dinâmica, de linhas marítimas de Materiais com Gradação Funcional (MGF). Assume-se que o módulo de elasticidade e a massa específica do material da viga variam ao longo da espessura da seção transversal tubular de acordo com uma lei de potência. Na discretização espacial das equações de equilíbrio, a linha marítima é representada por um elemento de viga de dois nós, com base nas hipóteses do modelo para vigas de Euler-Bernoulli, em que polinômios cúbicos de Hermite são utilizados na interpolação dos deslocamentos nodais e a cinemática do movimento é descrita através de grandezas referidas a um sistema coordenado local co-rotacionado. Consideram-se não linearidades geométricas envolvendo grandes deslocamentos e rotações, mas com pequenas deformações. Nas equações de movimento da linha marítima, são consideradas as seguintes influencias: do peso próprio, do empuxo, dos carregamentos hidrodinâmicos (devidos às ações de ondas, correntes e forças de massa adicional), dos deslocamentos prescritos (junto à fixação da embarcação), da ação de flutuadores e das forças de interação solo-estrutura. A integração temporal das equações de equilíbrio é realizada utilizando-se o algoritmo de discretização HHT (Hilbert-Hughes-Taylor) e a solução numérica obtida com a técnica iterativa de Newton Raphson. A metodologia numérica foi implementada e diversos exemplos são apresentados e discutidos enfatizando-se as diferenças de comportamento estrutural entre os modelos de viga com MGF e com material homogêneo. Resultados referentes a situações práticas da engenharia offshore são também tratados nos exemplos.
This work presents a new co-rotational beam element formulation to model the geometric three-dimensional static and dynamic nonlinear analysis of risers of Functionally Graded Materials (FGM). The material modulus of elasticity and density of the beam are assumed to vary through the pipe cross-section thickness following a power law function. In the spatial discretization of the riser equilibrium equations, a two node beam element based on Euler-Bernoulli theory is considered, with cubic Hermitian interpolation functions used for nodal displacement interpolations and element kinematics, all referred to a co-rotation coordinate system attached to the element local frame. In the element model, geometric non-linear effects are considered, involving large displacements and rotations but small strains. The motion of the riser results from the following applied forces: self weight, buoyancy, hydrodynamic (due to maritime waves, currents and added mass inertia), prescribed displacements (at the floating platform), action of floaters and seabed-structure interactions. Step-by-step time integration of the equilibrium equations is performed with HHT (Hilbert-Hughes- Taylor) algorithm and the numerical solution is obtained using the Newton- Raphson iterative technique. The methodology has been implemented and various sample results presented, that highlight the behavior of functionally graded material beams as compared to homogeneous beams. Applications related to practical offshore engineering situations are also considered.
Deshmukh, Pushkaraj M. "Modelling error estimation and adaptive modelling of functionally graded materials". Cincinnati, Ohio : University of Cincinnati, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=ucin1096036755.
Pełny tekst źródłaOyekoya, Oyedele O. "Structural integrity of engineering components made of functionally graded materials". Thesis, Cranfield University, 2008. http://hdl.handle.net/1826/3802.
Pełny tekst źródłaBell, Bryan Frederick. "Functionally graded, multilayer diamondlike carbon-hydroxyapatite nanocomposite coatings for orthopedic implants". Available online, Georgia Institute of Technology, 2004:, 2004. http://etd.gatech.edu/theses/available/etd-06072004-131058/unrestricted/bell%5Fbryan%5Ff%5F200405%5Fms.pdf.
Pełny tekst źródłaPelletier, Jacob Leo. "Thermoelastic Analysis and Optimization of Functionally Graded Plates and Shells". Fogler Library, University of Maine, 2005. http://www.library.umaine.edu/theses/pdf/PelletierJL2005.pdf.
Pełny tekst źródłaGoupee, Andrew. "Methodology for the Thermomechanical Simulation and Optimization of Functionally Graded Materials". Fogler Library, University of Maine, 2005. http://www.library.umaine.edu/theses/pdf/GoupeeA2005.pdf.
Pełny tekst źródłaWu, Kangjian [Verfasser]. "Process development for ZrO2-ZrSiO4/NiCr functionally graded materials / Kangjian Wu". Aachen : Shaker, 2013. http://d-nb.info/1050344340/34.
Pełny tekst źródłaCaraballo, Simon. "Thermo-Mechanical Beam Element for Analyzing Stresses in Functionally Graded Materials". Scholar Commons, 2011. http://scholarcommons.usf.edu/etd/3024.
Pełny tekst źródłaLyon, Mark Edward. "Incorporating Functionally Graded Materials and Precipitation Hardening into Microstructure Sensitive Design". Diss., CLICK HERE for online access, 2003. http://contentdm.lib.byu.edu/ETD/image/etd260.pdf.
Pełny tekst źródłaLimmahakhun, Sakkadech. "Development of functionally graded materials for innovation in bone-replacement applications". Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/108053/2/Sakkadech_Limmahakhun_Thesis.pdf.
Pełny tekst źródłaGao, Xiong. "Two-dimensional exact analysis of functionally graded piezoelectric cantilevers under electric and mechanical loadings". Thesis, University of Macau, 2018. http://umaclib3.umac.mo/record=b3950671.
Pełny tekst źródłaCantergiani, Elisa. "Mechanical Properties of Functionally Graded Materials: Carbon Gradient inside Interstitial Free Steel". Thesis, Université d'Ottawa / University of Ottawa, 2016. http://hdl.handle.net/10393/34314.
Pełny tekst źródłaGrigoriadis, Kostas. "Computational and conceptual blends : the epistemology of designing with functionally graded materials". Thesis, Royal College of Art, 2018. http://researchonline.rca.ac.uk/3401/.
Pełny tekst źródłaKidane, Addis Asmelash. "An experimental and analytical study of graded materials under thermo-mechanical dynamic loading /". View online ; access limited to URI, 2009. http://0-digitalcommons.uri.edu.helin.uri.edu/dissertations/AAI3380532.
Pełny tekst źródłaMorton, Sean (Sean C. ). "Diffusional stability studies of a T91/12Cr-2Si-Fe functionally graded composite". Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/106724.
Pełny tekst źródłaMIT Institute Archives copy: incomplete; ends at page 7.
Includes bibliographical references (leaf 16 ).
by Sean Morton.
S.B.
Handra. "Application and economic feasibility of functionally graded composite for lead-bismuth service". Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/45390.
Pełny tekst źródłaIncludes bibliographical references (p. 57-60).
Use of materials in liquid Pb/Pb-Bi systems in the higher temperature (550°C-700°C) in advanced liquid metal cooled advanced reactor systems is limited by their corrosion resistance. To address this issue, an Fe-12Cr-2.55Si alloy system is being developed and researched, and when used along with T91 (9Cr-lMo) as base material, it will be applicable in tubes production mainly for advanced LBE (Lead-Bismuth Eutectic) reactor systems. An analysis was carried out on this new technology's benefits and its commercialization to evaluate whether or not the technology has economic feasibility if it then is used and commercialized in LBE nuclear industry. The results indicate that this new material has potential to be favored. Before coming to this conclusion, factors such as examination of IP landscape & competing technologies, current and potential of competitiveness of the LBE reactors and the new materials, and a simple business strategic & entry market analysis have been conducted.
by Handra.
M.Eng.
Nandakumar, Nagarajan Nicholson P. S. "Nickel-alumina composites and graded materials by electrophoretic deposition /". *McMaster only, 2005.
Znajdź pełny tekst źródłaYıldırım, Uygar Güden Mustafa. "Investigation of quasi-static dynamic mechanical properties of functionally graded Sic-particulate reinforced aluminium metal matrix composites/". [s.l.]: [s.n.], 2004. http://library.iyte.edu.tr/tezler/master/makinamuh/T000470.doc.
Pełny tekst źródłaShah, Kamran. "Laser direct metal deposition of dissimilar and functionally graded alloys". Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/laser-direct-metal-deposition-of-dissimilar-and-functionally-graded-alloys(baa5f8fd-cead-4047-afbf-860844b501d8).html.
Pełny tekst źródłaUzun, Huseyin. "Fabrication and mechanical properties of SiCâ†(â†pâ†) /Al-2124 functionally graded materials". Thesis, Imperial College London, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341935.
Pełny tekst źródłaGandra, João Pedro Machado da. "Preliminary study on the production of functionally graded materials by friction stir processing". Master's thesis, Faculdade de Ciências e Tecnologia, 2010. http://hdl.handle.net/10362/4889.
Pełny tekst źródłaAn investigation was carried out to evaluate the potential application of Friction Stir Processing (FSP) to produce Functionally Graded Materials (FGM‟s). Friction stir processed materials can be considered as FGM‟s since the localized microstructural modification results in a gradual property modification. Therefore, to enhance hardness and ductility at specific superficial levels, surface layers of processed material were produced by multiple-pass FSP with an overlap ratio of 0.5. Overlapping was done on the advancing (AS) and retreating sides (RS) to study potential differences on the resulting mechanical properties. It was observed that processing in these two conditions led to different surface topography, since overlapping by the advancing side resulted in a wave-like surface profile. The mechanisms involved in FSP also led to its exploitation for the production of particle-reinforced Metal Matrix Composite (MMC) materials, as the severe plastic deformation produced during the process promotes the dispersion of the particles within the matrix. An investigation was conducted in order to produce aluminium based functionally graded MMCs reinforced by SiC ceramic particles with median size of 118.8, 37.4 and 12.3 micron. AA5083 aluminium alloy plates in the H111 and partially annealed conditions were processed. Several strategies for reinforcement were investigated and its influence on the particle distribution and homogeneity. The most promising results were achieved when the pin fully overlapped the groove. SiC fraction area analysis revealed two orthogonal gradients. Since FSP was used as a surface processing technique, the magnitude of the microstructural effects generated by the tool gradually decreases along the depth of the processed material. A second gradient was generated parallel to the bead surface due to the asymmetric nature of material flow around the tool. The use of smaller sized particles led to more homogeneous composite layers and smother gradients. Tool wear was very significant, proving that SiC reinforcement is not the most suitable method to produce FGM‟s.
Jain, Nitesh. "Experiment and analytical evaluation of dynamic fracture in graded multifunctional materials /". View online ; access limited to URI, 2005. http://0-digitalcommons.uri.edu.helin.uri.edu/dissertations/AAI3188059.
Pełny tekst źródłaSURANA, RAJESH R. "HIGH STRAIN FUNCTIONALLY GRADED BARIUM TITANATE AND ITS MATHEMATICAL CHARACTERIZATION". University of Cincinnati / OhioLINK, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1096650232.
Pełny tekst źródłaShi, Chao. "Finite Block Method and applications in engineering with Functional Graded Materials". Thesis, Queen Mary, University of London, 2018. http://qmro.qmul.ac.uk/xmlui/handle/123456789/39764.
Pełny tekst źródła