Rozprawy doktorskie na temat „Foam”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Foam”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Braz, Dulce Alexandra. "Particle-stabilised foams and foam films". Thesis, University of Hull, 2009. http://hydra.hull.ac.uk/resources/hull:2185.
Pełny tekst źródłaBhattacharjee, Samita. "Prediction Of Separation Factor In Foam Separation Of Proteins". Thesis, Indian Institute of Science, 1994. https://etd.iisc.ac.in/handle/2005/132.
Pełny tekst źródłaBhattacharjee, Samita. "Prediction Of Separation Factor In Foam Separation Of Proteins". Thesis, Indian Institute of Science, 1994. http://hdl.handle.net/2005/132.
Pełny tekst źródłaVerdugo, Rodriguez Rogelio Alberto. "Carbon foam characterization tensile evaluation of carbon foam ligaments". Texas A&M University, 2003. http://hdl.handle.net/1969.1/56.
Pełny tekst źródłaKeltner, Noelle Joy. "Study of PocoFoam (TM) as a heat exchanger element in cryogenic applications". Thesis, Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/51774.
Pełny tekst źródłaYüksel, Sinan Güden Mustafa. "Crushing behaviour of aluminum foam-filled composite tubes/". s.l.]: [s.n.], 2005. http://library.iyte.edu.tr/tezler/master/makinamuh/T000380.pdf.
Pełny tekst źródłaKeywords:crushing, aluminum foam, foam filling, energy absorber, composite tubes. Includes bibliographical references (leaves. 93-96).
Blandin, Christopher. "Production of dielectric materials". Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26568.
Pełny tekst źródłaCommittee Chair: Colton, Jonathan; Committee Member: Schultz, John; Committee Member: Zhou, Min. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Paknejad, Amir Saman. "Foam drilling simulator". Texas A&M University, 2005. http://hdl.handle.net/1969.1/4792.
Pełny tekst źródłaEverington, Ashley Steven. "Foam diagram summation". Thesis, University of Cambridge, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.620047.
Pełny tekst źródłaCheng, Liang. "Modeling and simulation studies of foam processes in improved oil recovery and acid-diversions". Access restricted to users with UT Austin EID Full text (PDF) from UMI/Dissertation Abstracts International, 2002. http://wwwlib.umi.com/cr/utexas/fullcit?p3077619.
Pełny tekst źródłaBarros, Daza Manuel Julian. "Numerical Simulation of High Expansion Foam Into Conduits and Mine Openings". Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/83565.
Pełny tekst źródłaMaster of Science
Schreder, Julian. "Thermoforming of PMI foam". Thesis, KTH, Lättkonstruktioner, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-157494.
Pełny tekst źródłaBreward, C. J. W. "The mathematics of foam". Thesis, University of Oxford, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.300849.
Pełny tekst źródłaElbadawi, Azhari Mohamed. "Foam finishing of fabrics". Thesis, University of Huddersfield, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.286082.
Pełny tekst źródłaRaukola, Jaakko I. "A new technology to manufacture polypropylene foam sheet and biaxially oriented foam film /". Espoo : Technical Research Centre of Finland, 1998. http://www.vtt.fi/inf/pdf/publications/1998/P361.pdf.
Pełny tekst źródłaPop-Iliev, Remon. "Processing of fine-cell polypropylene foams in compounding-based rotational foam molding". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape9/PQDD_0001/MQ45622.pdf.
Pełny tekst źródłaOsei-Bonsu, Kofi. "Foam-facilitated oil displacement in porous media". Thesis, University of Manchester, 2017. https://www.research.manchester.ac.uk/portal/en/theses/foamfacilitated-oil-displacement-in-porous-media(f2b2e93b-3a9b-41fa-a841-f81b271e8fad).html.
Pełny tekst źródłaAinsworth, Mark J. "Metal-foam interface stability during the filling of lost foam moulds with aluminium alloys". Thesis, University of Birmingham, 2011. http://etheses.bham.ac.uk//id/eprint/1481/.
Pełny tekst źródłaGu, Zipeng. "Emulsion Templated Polyimide Aerogel Foam and Hybrid Aerogel Foam as Absorbents for Oil Cleanup". University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1525711842824095.
Pełny tekst źródłaRodeheaver, Bret Alan. "Open-celled microcellular themoplastic foam". Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/18914.
Pełny tekst źródłaCunningham, Ryan. "Modifications to foam volume measurements". Thesis, McGill University, 2010. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=92193.
Pełny tekst źródłaL'étude du volume de mousse généré en corrélation avec le flux de gaz est utilisée depuis longtemps afin de déterminer la moussabilité d'une solution et d'en caractériser les agents de surface. La géométrie de la cuve ainsi que l'amplitude du flux de gaz sont connus pour avoir un effet sur les résultats de volume de mousse généré. Une colonne avec une aire de surface prédéfinie a été testée en parallèle avec une cuve conique de surface variable ; trois agents de surface (des moussants commerciaux) ont servi de base d'étude. Les résultats ont montré que la cuve possédant une aire de surface fixe causerait l'expansion ou la contraction de la mousse, masquant l'effet de l'agent de surface. Avec la cuve conique, deux régimes de production du volume de mousse, chacun dépendants du flux de gaz, ont été déterminés. Le régime correspondant à un flux de gaz faible est le produit d'une zone quiescente d'évolution des bulles alors que le régime correspondant à un flux de gaz élevé montre des propriétés typiquement cinématiques dues à une zone turbulente d'évolution des bulles. Les propriétés de moussage d'un agent de surface donné sont déterminées avec une meilleure exactitude en utilisant une cuve de surface variable avec un flux de gaz faible.
Ripley, Mark Brian. "Hydrocarbon bioremediation using bioactive foam". Thesis, University of York, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.313765.
Pełny tekst źródłaWang, Liguang. "Surface Forces in Foam Films". Diss., Virginia Tech, 2006. http://hdl.handle.net/10919/26476.
Pełny tekst źródłaPh. D.
Athinarayanan, Madhusudhanan. "Foam filled corrugated board manufacture". Thesis, University of Manchester, 2007. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.676723.
Pełny tekst źródłaMishra, Sarthak. "Numerical Analysis and Design of Carbon-Foam-based Garment and Helmet for Firefighters". University of Cincinnati / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1398699034.
Pełny tekst źródłaAkseli, Ilgaz Güden Mustafa. "The application of aliminum foam for the heat and noise reduction in automobiles/". [s.l.]: [s.n.], 2005. http://library.iyte.edu.tr/tezler/master/makinamuh/T000343.pdf.
Pełny tekst źródłaKeywords: Aluminum matrix composites, thermal conductivity, sound insulation, foam, metal matrix composites, aluminum foam. Includes bibliographical references (leaves. 77-81).
Miller, Erin Ashley. "Structure and mechanics of solid foam /". Thesis, Connect to this title online; UW restricted, 2005. http://hdl.handle.net/1773/9633.
Pełny tekst źródłaSchick, Christian. "A mathematical analysis of foam films". [S.l. : s.n.], 2004. http://deposit.ddb.de/cgi-bin/dokserv?idn=972684247.
Pełny tekst źródłaEftekhari, Farzad. "Foam-surfactant technology in soil remediation". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0018/MQ54314.pdf.
Pełny tekst źródłaMasanja, Daniel. "Foam concrete as a structural material /". Stockholm, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4002.
Pełny tekst źródłaWilliams, Andrew M. "Autoselective regeneration of gelcast ceramic foam". Thesis, Loughborough University, 2007. https://dspace.lboro.ac.uk/2134/12526.
Pełny tekst źródłaOriti, Daniele. "Spin foam models of quantum spacetime". Thesis, University of Cambridge, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.620008.
Pełny tekst źródłaHipkins, David B. "Class A Foam Water Sprinkler Systems". University of Canterbury. Civil Engineering, 1999. http://hdl.handle.net/10092/8274.
Pełny tekst źródłaKader, Atef Abd El. "Experimental studies of two dimensional foam". Thesis, Queen's University Belfast, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.268219.
Pełny tekst źródłaBlack, Ian James. "The properties of aqueous foam films". Thesis, University of Reading, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.316158.
Pełny tekst źródłaBall, Sarah K. M. "The foam separation of protein solutions". Thesis, University of Reading, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.388469.
Pełny tekst źródłaJodoin, Jeffrey Joseph. "The production of polypropylene microcellular foam". Thesis, Massachusetts Institute of Technology, 1985. http://hdl.handle.net/1721.1/14857.
Pełny tekst źródłaFox, Timothy J. "Aging in closed-cell phenolic foam". Thesis, Massachusetts Institute of Technology, 1986. http://hdl.handle.net/1721.1/15025.
Pełny tekst źródłaMICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING
Bibliography: leaves 126-127.
by Timothy J. Fox.
M.S.
Colton, Jonathan Stuart. "The nucleation of microcellular thermoplastic foam". Thesis, Massachusetts Institute of Technology, 1985. http://hdl.handle.net/1721.1/14986.
Pełny tekst źródłaMICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING.
Vita.
Includes bibliographies.
by Jonathan Stuart Colton.
Ph.D.
Hyatt, Daniel (Daniel Elliot). "Proposed testing method for foam padding". Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/69778.
Pełny tekst źródłaCataloged from PDF version of thesis.
Includes bibliographical references (p. 31).
One very basic necessity for foam padding testing technology is the ability to test two different padding samples and compare the results. The current standard for testing is to use a steel anvil backing for the padding, create an impact and record the parameters of the collision. The standardized method of testing with a steel anvil backing may not truly depict which foam or padding is actually the most protective, and this project aims to demonstrate how using a more humanlike backing produces more accurate test results. The experimentation setup used a projectile shot with a known velocity at various padding samples, where both a steel anvil and urethane foam are used as separate backings for the experiment. The steel anvil represents the current industry testing standard, whereas the urethane foam is meant to physically replicate the characteristics of human flesh. Using a load cell which is calibrated with an oscilloscope, a curve of the force applied over time will be recorded for each test run. From this force curve, the peak force, total impulse, and energy dissipated were calculated for each collision. By comparing these metrics across different foam padding specimens using the two padding backings across different velocities, the effect of varying the padding backing are demonstrated in the experimental results. Although using the steel anvil backing lead to generally similar recommendations for the best padding, it does not capture a lot of the details which are necessary to truly understand how different foam specimens compare with each other. Two main conclusions are drawn regarding the difference between the steel anvil and urethane foam setups: the difference in the shape of the force over time curves and the significance of changing the velocity of the impact. Using the urethane foam backing also established two different regimes which define whether or not the padding user would feel a significant impact. The parameters of these regimes provide the best data for deciding on appropriate foam specimens. The steel anvil backing lacks any capacity to test or predict which impacts are severe enough to cause serious injury.
by Daniel Hyatt.
S.B.
Sin, Lim Khai. "Studies of foam microstructure and rheology". Thesis, University of Birmingham, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.633208.
Pełny tekst źródłaStone, Robert Michael 1957. "Shear modulii for cellular foam materials". Thesis, The University of Arizona, 1989. http://hdl.handle.net/10150/277020.
Pełny tekst źródłaKamalanathan, Ishara Dedunu. "Foam fractionation of surfactant-protein mixtures". Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/foam-fractionation-of-surfactantprotein-mixtures(a6484b1a-d796-45ff-bc5c-420ef9130363).html.
Pełny tekst źródłaWang, Yingjie. "Modelling and prediction of foam structure". Thesis, Imperial College London, 2009. http://hdl.handle.net/10044/1/4664.
Pełny tekst źródłaPope, Ellen Grace. "Sepiolite/polyurethane open cell foam composites". Thesis, University of Bristol, 2017. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.738272.
Pełny tekst źródłaVitasari, Denny. "Adsorption and transport of surfactant/protein onto a foam lamella within a foam fractionation column with reflux". Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/adsorption-and-transport-of-surfactantprotein-onto-a-foam-lamella-within-a-foam-fractionation-column-with-reflux(8258925c-455b-4df4-8aa7-d8cff0e3b4e0).html.
Pełny tekst źródłaDahlström, Karolina. "How fining agents affect the tendency of pear base wine to form and stabilize foam". Thesis, Linnaeus University, School of Natural Sciences, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-7520.
Pełny tekst źródłaThe company Kiviks Musteri AB produces a pear base wine that forms stable foam, which is problematic from a production perspective. The aim of this thesis was to investigate the factors underlying foam stability in the pear base wine and to find means for its reduction. This was done by foam testing wines and varying several variables, such as the fining agents normally used in the wine production (bentonite, gelatin, siliceous earth and activated carbon), enzyme treatment, and by changing the fermenting yeast species.
Results: The wine started to form stable foam during fermentation, and foam stability could be reduced by using more bentonite and carbon during the fining process. The other fining agents appeared to have only limited impact on foaming characteristics. No pectin was present according to the pectin test, but protein bands were evident from SDS PAGE analysis, though absent in samples treated with increased doses of bentonite.
In conclusion, pectin is not a major foaming agent in the wine, the yeast is most likely the producer of the foaming agents, carbon and bentonite have a reducing effect on foam stability, bentonite also reduces protein content. Proteins are likely to be involved in the foam stabilization but are not the sole contributors to stable foam.
Suggs, James Alfred. "Generation of microbubble foam using a packed column". Thesis, This resource online, 1987. http://scholar.lib.vt.edu/theses/available/etd-04272010-020313/.
Pełny tekst źródłaBo, Chong. "Nanohybrids Based on Solid and Foam Polyurethanes". Thesis, University of North Texas, 2015. https://digital.library.unt.edu/ark:/67531/metadc799520/.
Pełny tekst źródłaTestouri, Aouatef. "Highly structured polymer foams from liquid foam templates using millifluidic lab-on-a-chip techniques". Phd thesis, Université Paris Sud - Paris XI, 2012. http://tel.archives-ouvertes.fr/tel-00771862.
Pełny tekst źródła