Rozprawy doktorskie na temat „Finite element analysis”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Finite element analysis”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Margetts, Lee. "Parallel finite element analysis". Thesis, University of Manchester, 2002. http://www.manchester.ac.uk/escholar/uk-ac-man-scw:70784.
Pełny tekst źródłaLarsson, Jesper. "Spring Element Evaluation Using Finite Element Analysis". Thesis, Högskolan i Jönköping, Tekniska Högskolan, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-45837.
Pełny tekst źródłaWong, S.-W. "Element-by-element methods in transient analysis". Thesis, University of Manchester, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383902.
Pełny tekst źródłaBakhtiari, Siamak. "Stochastic finite element slope stability analysis". Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/stochastic-finite-element-slope-stability-analysis(c1b451d9-8bf6-43ff-9c10-7b5209fb45c1).html.
Pełny tekst źródłaMonaghan, Dermot James. "Automatically coupling elements of dissimilar dimension in finite element analysis". Thesis, Queen's University Belfast, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326293.
Pełny tekst źródłaBerger, Stephanie 1981. "Experimental and finite element analysis of high pressure packer elements". Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28879.
Pełny tekst źródłaIncludes bibliographical references (leaf 30).
Packer elements are traditionally rubber seals that can operate under specified downhole conditions and provide a seal for either a short-term, retrievable, or a long-term, permanent, completion. In this case a retrievable 19.7cm (7-3/4") packer element for a high-pressure high-temperature (HPHT) environment was designed and tested. The element created a seal between the mandrel, or tubing, and the casing. At high temperature and pressure rubber needs to be contained so that it will create and maintain an energized seal. In this study only Aflas rubber was tested. Various backup systems were examined; some more traditional designs such as the carbon steel foldback ring were compared to more experimental ideas. Results of theoretical simulations were compared to actual test results in order to gain a greater understanding of element behavior. Experiments were also performed to study the process of element setting, which is difficult to observe due to the high pressures and temperatures required. In a related study alternative materials to rubber such as annealed high-conductivity oxygen-free copper were tested to determine if the properties could be applied for packer element applications. The most successful design was the foldback ring with an anti-extrusion PEEK ring under the gage ring. This design passed a liquid test at 134 MPa (19.5k psi) differential pressure and a gas test at 87.6 MPa (12.7k psi) differential pressure. New designs such as the split ring with mesh and the garter spring with mesh did not pass fixture tests but could be successful with further modifications. FEA was used as an analytical tool to create simulations of the element after a setting force is applied. The modeling was shown to correlate to the actual test results and therefore it would be a good tool to use in future studies.
by Stephanie Berger.
S.M.
Xiao, Dong Wen. "Efficiency analysis on element decomposition method for stochastic finite element analysis". Thesis, University of Macau, 2000. http://umaclib3.umac.mo/record=b1636334.
Pełny tekst źródłaIrfanoglu, Bulent. "Boundary Element-finite Element Acoustic Analysis Of Coupled Domains". Phd thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/12605360/index.pdf.
Pełny tekst źródłaJacobs, Ralf Theo. "Finite element-boundary element analysis of conformal microstrip antennas". Thesis, Heriot-Watt University, 2001. http://hdl.handle.net/10399/531.
Pełny tekst źródłaElofsson, Johan, i Per Martinsson. "Welding simulation with Finite Element Analysis". Thesis, University West, Department of Technology, Mathematics and Computer Science, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-827.
Pełny tekst źródłaJohannessen, Kjetil André. "An adaptive isogeometric finite element analysis". Thesis, Norwegian University of Science and Technology, Department of Mathematical Sciences, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9936.
Pełny tekst źródłaIn this thesis we will explore the possibilities of making a finite element solver for partial differential equations using the isogeometric framework established by Hughes et al. Whereas general B-splines and NURBS only allow for tensor product refinement, a new technology called T-splines will open for true local refinement. We will give an introduction into T-splines along with B-splines and NURBS on which they are built, presenting as well a refinement algorithm which will preserve the exact geometry of the T-spline and allow for more control points in the mesh. For the solver we will apply a residual-based a posteriori error estimator to identify elements which contribute the most to the error, which in turn allows for a fully automatic adaptive refinement scheme. The performance of the T-splines is shown to be superior on problems which contains singularities when compared with more traditional splines. Moreover the T-splines along with a posteriori error estimators are shown to have a very positive effect on badly parametrized models, as it seem to make the solution grid independent of the original parametrization.
Risa, Adrian Opheim. "Finite element analysis of marine umbilical". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for marin teknikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-15368.
Pełny tekst źródłaWitte, Holger. "Magnet design using finite element analysis". Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.491607.
Pełny tekst źródłaWagner, Roy E. "Finite element analysis of wire coating". Thesis, University of Ottawa (Canada), 1987. http://hdl.handle.net/10393/5236.
Pełny tekst źródłaWanstreet, Pinar. "Finite element analysis of slope stability". Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5480.
Pełny tekst źródłaTitle from document title page. Document formatted into pages; contains xii, 86 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 80-82).
Perry, William H. "Finite element analysis of polymer flows". Ohio : Ohio University, 1985. http://www.ohiolink.edu/etd/view.cgi?ohiou1184072781.
Pełny tekst źródłaMousa, A. I. "Finite element analysis of shell structure". Thesis, Cardiff University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532180.
Pełny tekst źródłaLee, J. S. "Finite element analysis of structured media". Thesis, Swansea University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637869.
Pełny tekst źródłaWilkerson, Lucas T. "FINITE ELEMENT ANALYSIS OF CANCELLOUS BONE". UKnowledge, 2012. http://uknowledge.uky.edu/me_etds/17.
Pełny tekst źródłaEl-Erris, Hazim Faysal. "Finite element analysis of shell structures". Thesis, Cardiff University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329658.
Pełny tekst źródłaBegg, Michael Colin. "Finite element analysis of induction motors". Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/37942.
Pełny tekst źródłaBehroozi, Mohammad H. "Finite element analysis of aircraft tyres". Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5390/.
Pełny tekst źródłaHsiao, Yung-Chin. "Finite element analysis of laser forming". Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/17440.
Pełny tekst źródłaIncludes bibliographical references (leaves 158-161).
by Yung-Chin Hsiao.
M.S.
Noelting, Swen Erik 1960. "FINITE ELEMENT ANALYSIS OF SHELL STRUCTURES". Thesis, The University of Arizona, 1986. http://hdl.handle.net/10150/275502.
Pełny tekst źródłaXia, Jianjun. "Finite Element Analysis of Ship Collisions". Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/34133.
Pełny tekst źródłaMaster of Science
Bentler, David J. "Finite Element Analysis of Deep Excavations". Diss., Virginia Tech, 1998. http://hdl.handle.net/10919/30767.
Pełny tekst źródłaPh. D.
Wilson, Kelly A. "Finite Element Analysis of Breast Implants". Thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/32972.
Pełny tekst źródłaMaster of Science
Seay, Patricia Anne. "Finite Element Analysis of Geotextile Tubes". Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36592.
Pełny tekst źródłaMaster of Science
Perry, William H. Jr. "Finite element analysis of polymer flows". Ohio University / OhioLINK, 1985. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1184072781.
Pełny tekst źródłaMahomed, N. "Finite element analysis of groundwater contamination". Master's thesis, University of Cape Town, 1990. http://hdl.handle.net/11427/8294.
Pełny tekst źródłaThe purpose of this study was to develop a computational Finite Element model, validated by experimentation, to assist in the understanding of groundwater contamination problems. It was mainly aimed at studying the extent and manner of travel of contaminants in the saturated soil of unconfined aquifers which may be pumped by of wells.
Zheng, Yi. "Finite Element Analysis for Fixture Stiffness". Link to electronic thesis, 2005. http://www.wpi.edu/Pubs/ETD/Available/etd-050505-130954/.
Pełny tekst źródłaNava, JoseÌ Manuel Franco. "Finite element versus boundary element analysis of finite strain elastic and elastoplastic fracture mechanics". Thesis, Cranfield University, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.401612.
Pełny tekst źródłaLai, Zhi Cheng. "Finite element analysis of electrostatic coupled systems using geometrically nonlinear mixed assumed stress finite elements". Diss., Pretoria : [s.n.], 2007. http://upetd.up.ac.za/thesis/available/etd-05052008-101337/.
Pełny tekst źródłaTseng, Gordon Bae-Ji. "Investigation of tetrahedron elements using automatic meshing in finite element analysis /". Online version of thesis, 1992. http://hdl.handle.net/1850/10699.
Pełny tekst źródłaSvensson, Daniel, i Tomas Walander. "Evaluation of an Interphase Element using Explicit Finite Element Analysis". Thesis, University of Skövde, School of Technology and Society, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-3895.
Pełny tekst źródłaA research group at University of Skövde has developed an interphase element for implementation in the commercial FE-software Abaqus. The element is using the Tvergaard & Hutchinson cohesive law and is implemented in Abaqus Explicit version 6.7 using the VUEL subroutine. This bachelor degree project is referring to evaluate the interphase element and also highlight problems with the element.
The behavior of the interphase element is evaluated in mode I using Double Cantilever Beam (DCB)-specimens and in mode II using End Notch Flexure (ENF)-specimens. The results from the simulations are compared and validated to an analytical solution.
FE-simulations performed with the interphase element show very good agreement with theory when using DCB- or ENF-specimens. The only exception is when an ENF-specimen has distorted elements.
When using explicit finite element software the critical time step is of great importance for the results of the analyses. If a too long time step is used, the simulation will fail to complete or complete with errors. A feasible equation for predicting the critical time step for the interphase element has been developed by the research group and the reliability of this equation is evaluated.
The result from simulations shows an excellent agreement with the equation when the interphase element governs the critical time step. However when the adherends governs the critical time step the equation gives a time step that is too large. A modification of this equation is suggested.
Galuta, Ezeedin M. "Combined boundary element and finite element analysis of composite bridges". Thesis, University of Ottawa (Canada), 1994. http://hdl.handle.net/10393/6814.
Pełny tekst źródłaAbou, Ghadir Mohamed Mohamed Moustafa. "Combined finite strip and finite element methods in structural analysis". Thesis, University of Leeds, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.446434.
Pełny tekst źródłaVarghese, Julian. "Hierarchical strategy for rapid finite element analysis". Thesis, Texas A&M University, 2003. http://hdl.handle.net/1969.1/232.
Pełny tekst źródłaLi, Jingang. "Isogeometric Finite Element Analysis Using T-Splines". Diss., CLICK HERE for online access, 2009. http://contentdm.lib.byu.edu/ETD/image/etd3159.pdf.
Pełny tekst źródłaBodur, Mehmet Ata. "Finite Element Analysis Of Discontinuous Contact Problems". Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12606964/index.pdf.
Pełny tekst źródłanamely plane stress, plane strain and axi-symmetric formulations is aimed. The problem is solved numerically, with Finite Element Method, and an Object Oriented computer program in C++ for this purpose is written, and the results are verified with some basic analytic solutions and ABAQUS package program. It is not aimed in this thesis work to give a new solution in the area of solution of contact problems, but instead, it is aimed to form a strong basis, and computational library, which is extendible for further development of the subject to include friction, plasticity, and different material modeling in this advanced field of mechanics.
Zhang, Lin. "Generalized finite element method for multiscale analysis". Diss., Texas A&M University, 2003. http://hdl.handle.net/1969.1/1141.
Pełny tekst źródłaGanendra, Dennis. "Finite element analysis of laterally loaded piles". Thesis, Imperial College London, 1993. http://hdl.handle.net/10044/1/7304.
Pełny tekst źródłaChen, Yuan Liang. "Finite element analysis of reinforced concrete members". Thesis, University of Ottawa (Canada), 1985. http://hdl.handle.net/10393/4842.
Pełny tekst źródłaNelson, Gregory Scott. "Finite element analysis of the interventricular septum". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0033/NQ38494.pdf.
Pełny tekst źródłaNandula, Ramgopal. "Finite element analysis of eccentrically loaded angles". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0013/MQ52474.pdf.
Pełny tekst źródłaBucci, Filippo. "Finite element analysis of repaired concrete structures". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0003/MQ40918.pdf.
Pełny tekst źródłaValentin, Rodolfo V. "Finite element analysis of adhesively bonded joints". Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/17575.
Pełny tekst źródłaGray, Hans. "Finite element analysis of the human tibia". Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.442458.
Pełny tekst źródłaGislason, Magnus Kjartan. "Finite element analysis of the wrist joint". Thesis, University of Strathclyde, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.501701.
Pełny tekst źródłaPaw, G. F. "Parallel processing procedures for finite element analysis". Thesis, Swansea University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.638432.
Pełny tekst źródła