Gotowa bibliografia na temat „Filtres – Humidité”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Filtres – Humidité”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Filtres – Humidité"
Aqueveque, Pablo, Macarena Díaz, Britam Gomez, Rodrigo Osorio, Francisco Pastene, Luciano Radrigan i Anibal Morales. "Embedded Electronic Sensor for Monitoring of Breathing Activity, Fitting and Filter Clogging in Reusable Industrial Respirators". Biosensors 12, nr 11 (8.11.2022): 991. http://dx.doi.org/10.3390/bios12110991.
Pełny tekst źródłaWidziewicz-Rzońca, Kamila, Sławomir Janas, Barbara Błaszczak, Monika Błaszczak, Halina Pyta, Patrycja Rogula-Kopiec, Barbara Mathews i Krzysztof Klejnowski. "ADVANCING THE UNDERSTANDING OF PM FILTER MASS STABILITY: UNVEILING THE INFLUENCE OF HUMIDITY AND TEMPERATURE". Zeszyty Naukowe Pro Publico Bono 1, nr 1 (13.11.2023): 7–26. http://dx.doi.org/10.5604/01.3001.0053.9741.
Pełny tekst źródłaMyers, David L., i B. Dean Arnold. "Electret Media for HVAC Filtration Applications". International Nonwovens Journal os-12, nr 4 (grudzień 2003): 1558925003os—12. http://dx.doi.org/10.1177/1558925003os-1200412.
Pełny tekst źródłaAbd Ali, Safaa Abd Zaid, Aurélie Joubert i Yves Andrès. "Evaluation of Antimicrobial Effect of Zinc Pyrithione against Airborne Fungi and Bacteria Growth Collected onto New and Loaded HVAC Fibrous Filters". Processes 9, nr 9 (27.08.2021): 1528. http://dx.doi.org/10.3390/pr9091528.
Pełny tekst źródłaWidziewicz-Rzońca, Kamila, i Malwina Tytła. "Water Sorption by Different Types of Filter Media Used for Particulate Matter Collection Under Varying Temperature and Humidity Conditions". International Journal of Environmental Research and Public Health 17, nr 14 (17.07.2020): 5180. http://dx.doi.org/10.3390/ijerph17145180.
Pełny tekst źródłaDierkes, M., i U. Hilleringmann. "Telemetric surface acoustic wave sensor for humidity". Advances in Radio Science 1 (5.05.2003): 131–33. http://dx.doi.org/10.5194/ars-1-131-2003.
Pełny tekst źródłaChervinskii, Semyon, Ibrahim Issah, Markus Lahikainen, Alireza R. Rashed, Kim Kuntze, Arri Priimagi i Humeyra Caglayan. "Humidity- and Temperature-Tunable Metal–Hydrogel–Metal Reflective Filters". ACS Applied Materials & Interfaces 13, nr 42 (13.10.2021): 50564–72. http://dx.doi.org/10.1021/acsami.1c15616.
Pełny tekst źródłaChien, Chih-Hsiang, Chufan Zhou, Simon Yang Sing, Benjamin Lopez, Alexandros Theodore, Chang-Yu Wu i Brian K. Birky. "Effects of Relative Humidity on Impregnated Filters Used in Measurement of Airborne Sulfur Dioxide". Annals of Work Exposures and Health 63, nr 7 (6.07.2019): 806–13. http://dx.doi.org/10.1093/annweh/wxz053.
Pełny tekst źródłaLee, Jinwook, i Jooyoun Kim. "Material Properties Influencing the Charge Decay of Electret Filters and their Impact on Filtration Performance". Polymers 12, nr 3 (24.03.2020): 721. http://dx.doi.org/10.3390/polym12030721.
Pełny tekst źródłaSidheswaran, Meera, Wenhao Chen, Agatha Chang, Robert Miller, Sebastian Cohn, Douglas Sullivan, William J. Fisk, Kazukiyo Kumagai i Hugo Destaillats. "Formaldehyde Emissions from Ventilation Filters Under Different Relative Humidity Conditions". Environmental Science & Technology 47, nr 10 (6.05.2013): 5336–43. http://dx.doi.org/10.1021/es400290p.
Pełny tekst źródłaRozprawy doktorskie na temat "Filtres – Humidité"
Lecoq, Marie. "Étude du colmatage de filtres métalliques par un aérosol liquide". Electronic Thesis or Diss., Université de Lorraine, 2023. http://www.theses.fr/2023LORR0006.
Pełny tekst źródłaIndustrial installations often contain hazardous materials in aerosol form. High efficiency filters (HEPA) are usually the last barrier that ensure the containment of these airborne particles. In the nuclear industry, a large amount of radioactivity is handled in liquid form, that may release, in few scenarios, liquid aerosols. These particles may affect the performance of HEPA filters with a huge increase of the pressure drop, which lead in return to a significant reduction of the ventilation flowrate. In such scenarios the pressure drop increase may exceed the filter mechanical strength and induce degradations of the media and leading to a deterioration of its capacity to retain aerosol pollutants. To overcome this problem, and to protect HEPA filter, one of the solutions is to use pre-filter (more mechanically resistant but less efficient) made up with metallic fibers. To validate this approach, it is necessary to study the behavior of these prefilters, composed of a stack of different monolayers of media. In my work, I first focused on the clogging of industrial prefilters with liquid aerosol particles. Then, for a more analytical study, I study the clogging each layer separately, in order, to model, on the future, the behavior of the assembly. The microphysical of each media (thickness, packing density, and fiber size distribution) are determined. The evolution of both filter collection efficiency and pressure drop are studied along the clogging by a submicron liquid aerosol DEHS, for different filtration velocity (0,9 à 18 cm/s). For monolayer filters, I measure pressure drops in line with the previous results found in the literature. These experiments first highlight a quasi-linear increase of the pressure drop, associate with a collection of the droplets by the fibers. Then an exponential growth is measures, that corresponds to the clogging of the pores. And finally, an abrupt stabilization is observed corresponding a liquid film formation and its continuous drainage by the airflow. However, I show a more gradual stabilization for multilayer filters. A clogging scenario is proposed, and a simplistic model is established to forecast the pressure drop as a function of the mass of liquid accumulated. To this aim, I develop a new method to freeze the liquid accumulation using resin, that where further analyze using X-ray tomography
Godoy, Charlotte. "Filtration d’aérosols de suie en présence de vapeur et/ou de gouttelettes d’eau". Electronic Thesis or Diss., Université de Lorraine, 2019. http://www.theses.fr/2019LORR0287.
Pełny tekst źródłaOne of the most frequently used methods to purify air contaminated by particles, in many industrial processes, is filter media. These collective equipment for protecting people and the environment are proven in terms of initial efficiency, but their behavior over time remains difficult to predict. This is all the more noticeable when these devices are confronted with a biphasic aerosol composed of solid and liquid particles. These situations can be encountered during metals machining, pesticides spreading or even during fires in confined areas such as nuclear power plants. The proposed study will aim to establish the performance of a fibrous media with respect to biphasic aerosols with nanostructured solid particles and droplets (submicron or micron-sized). If the filtration of solid aerosols or liquid aerosols is relatively well documented in the literature, no study has been interested in this problem of biphasic aerosols. For high solid / liquid ratios, the time course of the pressure drop should be close to solid aerosols filtration evolution, ie a quasi-linear increase over time. In the case of an aerosol predominantly made up of droplets, a constant pressure drop overtime, characterized by a state of equilibrium between the mass flow rate of collected droplets and the flow rate of liquid drained on the downstream face of the filter, could be considered . But what about the evolution of the pressure drop between these two extremes? The determination of the temporal evolution of the collection efficiency is also uncertain and should be regarded as a real metrological challenge
Joubert, Aurélie. "Performances des filtres plissés à Très Haute Efficacité en fonction de l'humidité relative de l'air". Thesis, Vandoeuvre-les-Nancy, INPL, 2009. http://www.theses.fr/2009INPL081N/document.
Pełny tekst źródłaPleated High Efficiency Particulate Air (HEPA) filters are used for maintaining the containment of radioactive substances in nuclear plants; thus, they are sensitive elements of nuclear safety. Some accidental situations, such as the emergence of a hole on a pipe with release of steam, can lead to a high increase of the air humidity. This work can overcome the lack of analytical data in the literature regarding the behaviour of pleated HEPA filters, in terms of changes in pressure drop and efficiency, in presence of humidity (unsaturated air). Experimental clogging tests have been performed on a test bench with two aerosols: non-hygroscopic micronic alumina particles and hygroscopic submicronic sodium chloride particles. The results showed that the influence of humidity during the clogging of a HEPA filter depends on several parameters: the geometry of the filter (plane or pleated), the size distribution and hygroscopicity of the aerosol clogging and finally the interaction time between the aerosol and humid air. Measurements of efficiency of clean and clogged filters (at different degrees of clogging), performed with the normalized soda fluorescein aerosol, are also sensitive to the presence of more or less relative humidity in the air. Finally, all results helped to develop an empirical model for estimating the evolution of the pressure drop of HEPA filters; this model is applicable during the formation of the particulate cake in presence of humidity without reducing of the surface area filtration
Popescu, R̆azvan Ștefan. "Modélisation du comportement des filtres en charbon actif utilisés pour l'épuration de l'air intérieur". La Rochelle, 2008. http://www.theses.fr/2008LAROS238.
Pełny tekst źródłaIndoor air cleaning by adsorption offers interesting solutions which haven’t been optimized, exploited and not even explored. The models of activated carbon filter systems take into consideration the mixture of several pollutants characterized by low concentrations, variable composition in time, temperature and humidity. All these properties are determining the operating criteria like the designing or endurance of those systems. The first part of the paper presents a synthesized biographical study upon the chemical and physical phenomenon which are typical for the filtration processes by adsorption. The second part presents the models developed in Matlab/Simulink software by taking into account the simplified hypothesis applied for the particularities of indoor air cleaning. First isothermal and dry conditions were modeled and then the effects of humidity and temperature influence. Finally the last part describes the simulations realized with the developed models. Mono and multi compound models for dry and isothermal conditions were compared with the experimental data for 6 pollutants measured at Ecole des Mines d’Ales. The influence of humidity was studied separately making a comparison between two models proposed in the present paper. In the end the last simulations show the potential of activated carbon filters to improve the indoor air quality
Ribeyre, Quentin. "Influence de l'humidité de l'air sur la perte de charge d'un dépôt nanostructuré". Thesis, Université de Lorraine, 2015. http://www.theses.fr/2015LORR0056/document.
Pełny tekst źródłaAir quality has emerged as a major public environmental and health issue. Almost all fine particles in the air are man-made or manufactured and there are many questions regarding the impact of ultrafine (<100nm) particles on human health. Thus, in most cases, institutions use large-scale protection equipment to protect workers. These institutions often use particulate air filters placed within the flow of general ventilation. Almost all of the available data corresponds to standard ambient air conditions. Despite this, few studies focus on the interaction of water moisture on the deposit formed by these accumulated nanoparticles and the impact on the pressure drop. The first part of this study consists of the measurement of sorption isotherms of four nanostructured powders. A semi-predictive sorption model based on the theory of the multimolecular adsorption (described by the GAB equation) and on the capillary condensation (Kelvin’s law) was developed. The second part of the study experimentally describes the thickness and pressure drop variation of a porous medium formed by these nanostructured particles for different values of humidity. Through the thickness variation of the media - determined by laser trigonometry - and adsorption-condensation model, the porosity for each humidity value has been calculated. Following this, three pressure drop models available in the literature have been modified by introducing cake thickness and porosity variation according to relative humidity. This allows us to model the experimental data for all the samples. Finally, a rheological analysis of powders is proposed to quantify the cohesion changes under moisture conditions
ZUBICKI, ANNE. "Filtres echangeurs de chaleur et d'humidite versus humidificateurs chauffants utilises au cours de la ventilation mecanique prolongee : deux etudes propectives". Montpellier 1, 1992. http://www.theses.fr/1992MON11155.
Pełny tekst źródłaChvátal, Michal. "Řízení dodávky vody v rodinném domě". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2021. http://www.nusl.cz/ntk/nusl-442453.
Pełny tekst źródłaPonkala, Mikko Juha Viljami. "Humidity effects on hygroscopic particles deposited on HEPA filters and silicon wafer surfaces". 2012. http://hdl.handle.net/2152/20008.
Pełny tekst źródłatext
Агафонов, Олексій Андрійович. "Аналіз та вдосконалення технології зневоднення гідроксиду алюмінію". Магістерська робота, 2020. https://dspace.znu.edu.ua/jspui/handle/12345/4683.
Pełny tekst źródłaUA : Наведено аналіз сучасних способів зневоднення та факторів, що впливають на технологію зневоднення гідроксиду алюмінію. Експериментально досліджено технологію зневоднення гідроксиду алюмінію, який надходить на кальцінацію, при додаванні зневоднювачів РОLYPAV-С16 (ЕО) виробництва ТДВ «Пологівський хімічний завод «Коагулянт» і іноземного Nalkо 85488. Оптимальні витрати зневоднювачів РОLYPAV-С16 (ЕО) і Nalkо 85488 на 1 т А12О3 становлять 50 г та 40 г відповідно. Погіршення показників роботи печі киплячого шару при використанні реагентів не помічено, основні технологічні параметри зберігалися на заданому рівні. При роботі печі з байпасом витрата газу при застосуванні реагентів знизилася в середньому на 1 м3/т глинозему. Використання зневоднювачів РОLYPAV-С16 (ЕО) і Nalkо 85488 дозволяє зменшити вологість гідроксиду алюмінію на 2 % і стабілізувати роботу вузла фільтрування.
EN : The analysis of modern dehydration methods and the factors influencing to dehydration technology of aluminum hydroxide are given. The dehydration technology of aluminum hydroxide, which enters the calcination, with the addition of РОLYPAV-С16 (ЕО) «Pology Chemical Plant «Coagulant» ALC and foreign Nalko 85488 dehydrators was investigated experimentally. The optimal consumption of РОLYPAV-С16 (ЕО) and Nalko 85488 dehydrators per 1 ton of A12O3 is 50 g and 40 g, respectively. Performance deterioration of the fluid-bed furnace when using reagents was not observed, the main technological parameters were maintained at a given level. Gas consumption per 1 ton of alumina during the operation of the bypass furnace and with using of these reagents decreased by an average of 1 m3. The using of ROLYPAV-C16 (EO) and Nalko 85488 dehydrators allows to reduce the humidity of aluminum hydroxide by 2% and to stabilize the operation of the filtration unit.
Części książek na temat "Filtres – Humidité"
Del Dottore, Emanuela, Alessio Mondini, Davide Bray i Barbara Mazzolai. "Miniature Soil Moisture Sensors for a Root-Inspired Burrowing Growing Robot". W Biomimetic and Biohybrid Systems, 184–96. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-38857-6_15.
Pełny tekst źródłaDangsakul, Prachumpong, Nutchanon Siripool, Kraithep Sirisanwannakul, Rachaporn Keinprasit, Khongpan Rungprateeptavorn, Suthum Keerativittayanun i Jessada Karnjana. "Humidity Sensor Accuracy Improvement Based on Two Nested Kalman Filters for Commercial Cultivation of Tropical Orchids". W Communications in Computer and Information Science, 104–12. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-63823-8_13.
Pełny tekst źródłaSiripool, Nutchanon, Kraithep Sirisanwannakul, Waree Kongprawechnon, Prachumpong Dangsakul, Anuchit Leelayuttho, Sommai Chokrung, Jakkaphob Intha, Suthum Keerativittayanun i Jessada Karnjana. "Relative Humidity Estimation Based on Two Nested Kalman Filters with Bicubic Interpolation for Commercial Cultivation of Tropical Orchids". W Lecture Notes in Computer Science, 201–12. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-62509-2_17.
Pełny tekst źródłaBeatriz Cuellar, Hugo, Jesús de la Cruz-Alejo, Ernesto Enciso Contreras i I. C. Alcocer Guillermo. "Design and Implementation of a LMS Adaptive Filter for Humidity and Temperature Control in a Bioreactor". W Lecture Notes in Electrical Engineering, 123–36. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72208-1_10.
Pełny tekst źródłaSirisanwannakul, Kraithep, Nutchanon Siripool, Waree Kongprawechnon, Prachumpong Dangsakul, Udom Lewlomphaisarl, Seksun Sartsatit, Thanika Duangtanoo i in. "Humidity Sensor Drift Detection and Correction Based on a Kalman Filter with an Artificial Neural Network for Commercial Cultivation of Tropical Orchids". W Advances in Intelligent Systems and Computing, 140–49. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68133-3_14.
Pełny tekst źródłaStradling, J. R., i S. E. Craig. "The upper respiratory tract". W Oxford Textbook of Medicine, 3169–72. Oxford University Press, 2010. http://dx.doi.org/10.1093/med/9780199204854.003.180101.
Pełny tekst źródłaShah, Pallav L., J. R. Stradling i S. E. Craig. "The upper respiratory tract". W Oxford Textbook of Medicine, redaktor Pallav L. Shah, 3933–37. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198746690.003.0396.
Pełny tekst źródłaPretelli, Marco, Leila Signorelli i Maria Antonietta De Vivo. "Improving the Accessibility of Cultural Sites During Pandemic Through Microclimate Control. The Case of CapsulART Applied to the MANN Museum in Naples". W Studies in Health Technology and Informatics. IOS Press, 2022. http://dx.doi.org/10.3233/shti220880.
Pełny tekst źródłaAbreu-Harbich, Loyde Vieira de, Giovana Gravellos Dias Starke Rodrigues, Pérola Felipette Brocaneli, Carolina de Rezende Maciel i Sasquia Hizuru Obata. "Influence of Thermal Comfort provided by Tree Shadows on sidewalks in Downtown São Paulo". W A ERA AMBIENTAL: Do edifício à cidade, 9–20. Even3 Publicações, 2022. http://dx.doi.org/10.29327/5141261.1-1.
Pełny tekst źródła"efficiency. By measurements of total odour strength in a treatment plant the ED values pointed out the sludge press and dewatering process as the predominant odour sources of the plant. In the venting air from this position extremely high ED values were recorded. This air was led through a carbon filter for odour reduction. Olfactometric measurements at the filter revealed poor odour reducing efficiency. It was observed that odour compounds were not destroyed in the filter. They only restrained until the carbon became saturated, and thereafter evaporated into the outlet air contributing to the odour strength. The filter capacity was obviously too small for the heavy load. Attempts to reduce the odour strength before the filter did not succeed, until the air was led through a container filled with saturated lime slurry (pH = 12-14). The slurry was part of a precipitation process in the plant. Dispersion in the alkaline slurry extensively reduced the odour strength of the air, resulting in sufficient capacity of the carbon filter also when handling heavy loads of sewage sludge. Since then the carbon filter has worked well, within the limitation of such filters in general. Neither is it observed signs indicating reduced precipitation properties of the lime slurry. Measurements of total odour strength in combustion processes imply sampling challenges. Beside the chemical scrubber process, combustion of odorous air is the best odour reducing method. The disadvantage of this process is the high energy costs. Treatment at apropriate conditions, however, will destroy the odorous compounds extensively. Temperatures about 850 C and contact time up to 3 seconds are reported (2,3). Olfactometric measurements in combustion processes involve certain sampling problems caused by the temperature difference between inlet and outlet. The humidity of outlet air must also be taken into consideration. Problems may occur when hot outlet air is sampled at low temperatures. In most such cases sampling is impossible without special arrangements. Such conditions are present during odour measurements in fish meal plants with combustion as the odour reducing method. The largest problem turned out to be the temperature differences between outlet air (85-220 C) and outdoor temperatures (0-15 C), causing condensation. The dew point of the outlet air was calculated, and experiments were carried out with dilution of the outlet air to prevent condensation in the sampling bags. Condensation was prevented by diluting the outlet air 5-150 times with dry, purified N gas. Comparison of N -diluted and undiluted samples revealed large differences in ED value. In samples demanding a high degree of dilution to prevent condensation, the measured odour strength was up to 5 times higher than in the undiluted corresponding samples. Samples demanding less dilution showed less deviating results. 4. CONCLUSIONS In the attempt to minimize odour emission, olfactometric measurements of total odour strength give useful informations about the odour reducing efficiency of different processes as a function of parameters like dosage of chemicals in scrubbers, humidity and temperature in packed filters, flow rates, etc. Olfactometric measurements also point out the main odour sources of the plant. From a set of olfactometric data combined with other essential". W Odour Prevention and Control of Organic Sludge and Livestock Farming, 98. CRC Press, 1986. http://dx.doi.org/10.1201/9781482286311-34.
Pełny tekst źródłaStreszczenia konferencji na temat "Filtres – Humidité"
Wilcox, Melissa, David Ransom i Hector Delgado-Garibay. "Filter Failure During High Humidity Conditions". W ASME Turbo Expo 2010: Power for Land, Sea, and Air. ASMEDC, 2010. http://dx.doi.org/10.1115/gt2010-23641.
Pełny tekst źródłaSchroth, Thomas, Antje Rudolph i Carl Freudenberg. "Newly Developed Filter Products for Gas Turbine Intake Air Filtration". W ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-gt-517.
Pełny tekst źródłaPenrod, Samuel L., Pete D. Unger, Ronald P. Rohrbach, Daniel E. Bause, Lixin Xue i Russ A. Dondero. "Filtration of Aircraft Cabin Air Odors in 100% Relative Humidity, Low Temperature Conditions". W ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0646.
Pełny tekst źródłaGahr, Thomas C., James D. Benson, Kristine Graham, Mark Gogins i Michael Brown. "Advancements in Electrospun Nanofiber Technology Reduce Gas Turbine Compressor Fouling". W ASME Turbo Expo 2005: Power for Land, Sea, and Air. ASMEDC, 2005. http://dx.doi.org/10.1115/gt2005-68266.
Pełny tekst źródłaMadsen, Stian, Jørn Watvedt i Lars E. Bakken. "Gas Turbine Fouling Offshore: Air Intake Filtration Optimization". W ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/gt2018-75613.
Pełny tekst źródłaAbdo, Peter, B. P. Huynh i Vahik Avakian. "Effect of Green Wall Modules on Air Temperature and Humidity". W ASME 2018 5th Joint US-European Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/fedsm2018-83139.
Pełny tekst źródłaPond, B. J., H. Nusbaum, T. C. Du, J. Sobczak, R. A. Schmell, C. K. Carniglia, R. Petty, J. Johnston i G. B. Charlton. "Measurements of Spectral Shifts and Stress Versus Relative Humidity in Multilayer Coatings". W Optical Interference Coatings. Washington, D.C.: Optica Publishing Group, 1992. http://dx.doi.org/10.1364/oic.1992.ofa3.
Pełny tekst źródłaMadsen, Stian, i Lars E. Bakken. "Gas Turbine Operation Offshore: Increased Operating Interval and Higher Engine Performance Through Optimized Intake Air Filter System". W ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-56066.
Pełny tekst źródłaChervinskii, Semyon, Ibrahim Issah, Markus Lahikainen, Alireza R. Rashed, Kim Kuntze, Arri Priimagi i Humeyra Caglayan. "Humidity- and Temperature- Stimuli-Responsive Tunable Metal-Hydrogel-Metal Reflective Filter". W CLEO: QELS_Fundamental Science. Washington, D.C.: Optica Publishing Group, 2022. http://dx.doi.org/10.1364/cleo_qels.2022.fth5b.6.
Pełny tekst źródłaHerrmann, R., R. Goetzelmann i R. Schneider. "Stability of Dielectric Multilayer Coatings Produced by Different Coating Technologies". W Optical Interference Coatings. Washington, D.C.: Optica Publishing Group, 1988. http://dx.doi.org/10.1364/oic.1988.thd11.
Pełny tekst źródłaRaporty organizacyjne na temat "Filtres – Humidité"
Vendel, J., i P. Letourneau. Effect of humidity on the filter pressure drop. Office of Scientific and Technical Information (OSTI), luty 1995. http://dx.doi.org/10.2172/95649.
Pełny tekst źródłaCheng, Mengdawn, Lee Trowbridge, Glenn A. Fugate i Jason Richards. Capture of Uranium Particles By Filtration: Effects of Filter Material and Air Humidity. Office of Scientific and Technical Information (OSTI), styczeń 2020. http://dx.doi.org/10.2172/1606911.
Pełny tekst źródłaGupta, Ajay. Study of the effect of humidity, particle hygroscopicity and size on the mass loading capacity of HEPA filters. Office of Scientific and Technical Information (OSTI), styczeń 1992. http://dx.doi.org/10.2172/10172571.
Pełny tekst źródła