Gotowa bibliografia na temat „Fil flexible”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Fil flexible”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Fil flexible"
Garofalo, Emilia, Luciano Di Maio, Paola Scarfato, Fabrizio Di Gregorio i Loredana Incarnato. "Nanotechnology-Based Strategy to Upgrade the Performances of Plastic Flexible Film Waste". Polymers 11, nr 5 (8.05.2019): 830. http://dx.doi.org/10.3390/polym11050830.
Pełny tekst źródłaAltun, Ali Ozhan, Jun-Ho Jeong, Sung-Un Jung, Ki-Don Kim, Dae-Geun Choi, Jun-Hyuk Choi, Jong-Youp Shim, Dong-II Lee i Eung-Sug Lee. "Stamping-Based Planarization of Flexible Substrate for Low-Pressure UV Nanoimprint Lithography". Journal of Nanoscience and Nanotechnology 8, nr 11 (1.11.2008): 5673–77. http://dx.doi.org/10.1166/jnn.2008.254.
Pełny tekst źródłaGarofalo, Emilia, Luciano Di Maio, Paola Scarfato, Arianna Pietrosanto, Antonio Protopapa i Loredana Incarnato. "Study on Improving the Processability and Properties of Mixed Polyolefin Post-Consumer Plastics for Piping Applications". Polymers 13, nr 1 (27.12.2020): 71. http://dx.doi.org/10.3390/polym13010071.
Pełny tekst źródłaGarofalo, Emilia, Luciano Di Maio, Paola Scarfato, Annalisa Apicella, Antonio Protopapa i Loredana Incarnato. "Nanosilicates in Compatibilized Mixed Recycled Polyolefins: Rheological Behavior and Film Production in a Circular Approach". Nanomaterials 11, nr 8 (20.08.2021): 2128. http://dx.doi.org/10.3390/nano11082128.
Pełny tekst źródłaRuzicka-Rossier, Monique. "Le zonage revisité : l’enseignement de Tokyo". Géo-Regards 6, nr 1 (2013): 133–45. http://dx.doi.org/10.33055/georegards.2013.006.01.133.
Pełny tekst źródłaGarofalo, Emilia, Leonardo Taurino, Luciano Di Maio, Heinz C. Neitzert i Loredana Incarnato. "Assessment of Melt Compounding with Zeolites as an Effective Deodorization Strategy for Mixed Plastic Wastes and Comparison with Degassing". Polymers 15, nr 8 (13.04.2023): 1858. http://dx.doi.org/10.3390/polym15081858.
Pełny tekst źródłaDerrouiche, Ridha. "Supply Chain 4.0: Improving supply chains with analytics and Industry 4.0 technologies, Emel Aktas, Michael Bourlakis, Ioannis Minis, Vasileios Zeimpekis". Revue Française de Gestion Industrielle 36, nr 1 (25.04.2022): 124–29. http://dx.doi.org/10.53102/2022.36.01.1111.
Pełny tekst źródłaGaillard, A., M. Roché, S. Lerouge, C. Gay, L. Lebon i L. Limat. "Viscoelastic liquid curtains: experimental results on the flow of a falling sheet of polymer solution". Journal of Fluid Mechanics 873 (24.06.2019): 358–409. http://dx.doi.org/10.1017/jfm.2019.389.
Pełny tekst źródłaLadetto, Marco, Simone Ferrero, Ilaria Del Giudice, Sara Galimberti, Valter Gattei, Luigi Marcheselli, Barbara Mantoan i in. "A Comprehensive and Systematic Analysis of Minimal Residual Disease (MRD) Monitoring in Follicular Lymphoma: Results from the Fondazione Italiana Linfomi (FIL) FOLL12 Trial". Blood 138, Supplement 1 (5.11.2021): 41. http://dx.doi.org/10.1182/blood-2021-146773.
Pełny tekst źródłaChen, Wenling, Chao Liu, Yuqi Zou, Zhihe Ren, Yuanzhuo Xiang, Fanchao Meng, Yinsheng Xu i in. "Flexible omnidirectional reflective film for CO2 laser protection". Chinese Optics Letters 21, nr 2 (2023): 022201. http://dx.doi.org/10.3788/col202321.022201.
Pełny tekst źródłaRozprawy doktorskie na temat "Fil flexible"
Maso, Marco. "Flexible Cognitive Small-cells for Next Generation Two-tiered Networks". Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3422577.
Pełny tekst źródłaNell'ultimo decennio, le reti cellulari sono state caratterizzate da una crescita costante della richiesta di dati da parte degli utenti. Unito all'inefficienza delle politiche di gestione dello spettro adottate e all'obsolescenza delle infrastrutture di rete, questo ha generato una crescente necessità di maggiore capacità e copertura di rete. Lo sviluppo di più efficienti politiche di gestione dello spettro radio e di nuove tecnologie è un passo necessario per far fronte a queste problematiche. In questo senso, i vantaggi apportati da nuovi e flessibili schemi di gestione dello spettro, come il cosiddetto dynamic spectrum access (DSA) e gli approcci di tipo cognitive radio (CR), sono stati largamente studiati sin dagli inizi del secolo. Nuove basi per le reti cellulari di prossima generazione sono state poste anche dai più recenti standard, le cui innovazioni tecnologiche promettono un sostanziale aumento di capacità rispetto alle reti esistenti. Oltre alle innovazioni puramente tecniche, le soluzioni proposte per strutturare reti cellulari evolute, in grado di fornire elevate performance e soddisfare le richieste degli utenti, prevedono nuovi paradigmi che ne guidino la progettazione. In questo senso, approcci gerarchici al network planning, risultanti in reti a due livelli, in cui un livello di stazioni di base di tipo macro (MBS) viene affiancato da un livello di stazioni di base di tipo small (SBS), sono considerati estremamente promettenti. Queste nuove reti a due livelli potranno aumentare la capacità delle reti attuali in molti modi, grazie a minori attenuazioni medie nei canali tra i dispositivi, un uso più efficiente della risorsa spettrale e una miglior copertura di rete. Il lavoro presentato in questa tesi è concentrato sulla coesistenza tra i due livelli di rete, quando questi adottano la stessa banda in trasmissione per raggiungere un uso più efficiente della risorsa spettrale. In questo caso, se l'interferenza mutualmente generata dai trasmettitori attivi nei due livelli di rete non viene attenuata o eliminata da adeguati meccanismi per la gestione dell'interferenza, la coesistenza può risultare problematica, quando non impossibile. Questa tesi è suddivisa in tre parti e propone un ampia analisi che porta allo sviluppo di una nuova tecnica di tipo DSA, partendo dalle basi teoriche e arrivando allo sviluppo di un proof-of-concept. Il primo caso studiato è dato da una rete a due livelli semplificata, ottenuta considerando la presenza di una sola SBS all'interno del raggio di copertura di una MBS preesistente. Per garantire la compatibilità delle soluzioni proposte con le operazioni di una classica rete a singolo livello, si impone che la tecnologia di strato fisico adottata dalla MBS, i.e., orthogonal frequency division multiplexing (OFDM), non debba prevedere alcuna modifica. Di conseguenza, le relazioni tra i due livelli di rete vengono strutturate secondo il modello CR, e viene proposta una nuova tecnica per realizzare la coesistenza dei due livelli chiamata cognitive interference alignment (CIA), adottata unicamente dalla SBS. In seguito, l'analisi viene estesa ad una rete multi-utente, considerando la presenza di più di una SBS all'interno del raggio di copertura della MBS preesistente. La fattibilità e l'efficacia di CIA viene analizzata in questo contesto. Di conseguenza, vengono proposte strategie centralizzate e distribuite per la gestione dell'interferenza multi-utente, causata dalla presenza di più SBS all'interno del secondo livello di rete. L'analisi delle prestazioni della rete a due livelli viene effettuata per entrambi gli approcci, in caso di disponibilità di stime di canale al trasmettitore sia perfette sia imperfette (perfect e imperfect CSIT). Questa parte si conclude identificando le problematiche e i meriti principali legati all'implementazione pratica degli approcci proposti, sia centralizzati che distribuiti, e discutendone possibili soluzioni. Nell'ultima parte della tesi, l'analisi si sposta gradualmente da un approccio di tipo teorico ad uno di tipo pratico, portando allo sviluppo di un transceiver ibrido basato sulla tecnica proposta in precedenza, come proof-of-concept. Particolare attenzione viene dedicata nel mostrare come CIA sia applicabile non solo in caso di scenari di tipo CR, ma possa anche essere utilizzata in modo flessibile per incrementare le prestazioni di una generica stazione di base di tipo femto (FBS) utilizzante OFDM, tipico esempio di dispositivo a bassa potenza adottato nelle attuali reti a più livelli. Viene mostrato come un aumento dell'efficienza energetica del dispositivo sia possibile, grazie all'utilizzo di CIA. Inoltre, viene studiato l'impatto dell'allocazione di potenza effettuata dalla FBS su questo risultato viene studiato, considerando la presenza di canali caratterizzati da varie descrizioni statistiche. La tesi si conclude con la progettazione di un transceiver riconfigurabile, realizzato utilizzando un approccio di tipo software defined radio (SDR), al fine di ottenere uno strumento flessibile per realizzare esperimenti pratici che possano convalidare i precedenti risultati teorici. L'architettura proposta, in grado di trasmettere/ricevere segnali di tipo OFDM/CIA (o combinazioni di entrambi), viene infine utilizzata per testare l'efficacia di CIA nell'aumentare l'efficienza energetica di una classica trasmissione OFDM, con risultati positivi.
Rabobason, Yvon Georges. "Modélisation de système antennaire flexible à bas coût pour objets communicants non planaire". Rouen, 2016. http://www.theses.fr/2016ROUES060.
Pełny tekst źródłaFlexible electronics is currently considered as one of the technological solutions to face up to geometric constraints, lower cost and technological requirements. This emergence will ultimately drive the market for connected clothing, implanted electronics (in-body electronics). However, the flexible technology is not mature and has some issues that remain to lift as the choice of substrates both effective, environmentally friendly and at lower costs, modeling (analytic or digital) of a system or flexible subsystem, or the analysis of electromagnetic phenomena related to non-planar geometry. This manuscript presents the memory of my PhD thesis that focuses on the modeling of flexible antenna system for low-cost non-planar communicating objects. First, the different parameters such as the quality factor, antenna efficiencies, gain or bias, for evaluating the performance of an antenna are introduced. Subsequently, research work on flexible substrate based different antenna structures is presented. The main characteristics of flexible plastic substrates commonly used are addressed. The choice towards the substrates Kapton HN, as the best compromise cost-effectiveness robustness is justified. The influence of the antenna curvature constitutes the main object of the present PhD thesis. In this way, the study on the EM phenomena associated with the use of a flexible patch antenna structure is developed. Novel analytical formulas for assessing the antenna radiation efficiency in discrete curvatures scenarios are established. In addition, a methodology providing an analysis and modeling approach to passive and active 1×2 antenna arrays is presented and validated. Finally, two new structures of flexible high performance antennas in terms of bandwidth and radiation efficiencies are designed and implemented. The Kapton-based broadband structures are based on slots antenna topology with new matching adaptation technique by the use of lumped elements. The influence of the curvature on the slot antenna prototypes are analyzed and discussed
Maso, Marco. "Flexible Cognitive Small-cells for Next Generation Two-tiered Networks". Phd thesis, Supélec, 2013. http://tel.archives-ouvertes.fr/tel-00822415.
Pełny tekst źródłaVillemaud, Guillaume. "Les communications multi-* : contribution au développement d'architectures radio flexibles pour les réseaux sans fil hétérogènes". Habilitation à diriger des recherches, INSA de Lyon, 2013. http://tel.archives-ouvertes.fr/tel-00937469.
Pełny tekst źródłaWu, Hankai. "Développement de transducteurs piézo-résistifs sur substrat textile pour caractérisation de flux d'air". Electronic Thesis or Diss., Ecole nationale supérieure Mines-Télécom Atlantique Bretagne Pays de la Loire, 2024. http://www.theses.fr/2024IMTA0405.
Pełny tekst źródłaThe aim of this work is to develop a pressure drop detecting system, which is to be integrated onto an air filter in an air handling unit (AHU). Indeed, filter pressure drop increases with the duration of use, and theevolution has a significant impact on the energy consumption of AHU. A measurement system has been developed using commercial sensors connected to a microcontroller. But this system is not permeable to airflow. A textile sensing solution, based on the piezoresistive phenomenon, was therefore proposed and developed. The textile substrate chosen was elastane, because of its elasticity and ability to deform under low stress. This material was functionalized by two techniques with a π conjugated polymer, poly(3,4-ethylenedioxythiophene), possessing semiconducting properties and bringing exploitable conductivity to a unitary textile yarn over lengths of the order of a meter. These functionalized textile yarns were characterized mechanically, morphologically, electrically and electromechanically. The results demonstrated the affinity of the conductive layer to the textile substrate, and training procedures were established to improve electromechanical responses at 5% elongation. Finally, preliminary detection tests on a laboratory-scale ventilation duct and on an industrial-scale AHU concluded that these yarns could discriminate air velocities ranging from 1 to 3 m/s
Santamaria, Luca. "Systèmes d'antennes reconfigurables intégrés dédiés aux réseaux IoT sans fil dynamiques". Thesis, Université Côte d'Azur, 2021. http://www.theses.fr/2021COAZ4103.
Pełny tekst źródłaBecause of the unique characteristics of the Internet of things (IoT), such as massive volume of data, stringent resource constraints, and heterogeneous activity levels, future wireless IoT infrastructures must integrate smart self-organizing solutions to efficiently operate in the dynamic IoT environment.Within this context, this thesis presents the development of innovative integrated reconfigurable antenna systems capable of adapting to such dynamic and multi-purposed wireless IoT networks.As a first step, the thesis covers the design of antennas suitable for integration in IoT terminals when specific radiation properties or multi-band operations are needed. Both antenna structures and integration techniques are presented for single and multi-band IoT applications. Next, a design methodology based on a multi-access single structure antenna and a miniaturized omnidirectional circularly polarized antenna for IoT applications are presented. Successively, an approach based on Neural Networks (NN) to estimate the performance of small antennas given practical constraints is presented. As proof of concept, the case of printed antennas integrated into compact terminals is considered.In the second part, the thesis focuses on the development of compact and low-power-consuming reconfigurable antennas. In order to enable new applications, such as wearable communications, and to deliver higher performance in a variety of integration environments, a flexible, reconfigurable antenna is presented. To guarantee reliable operation, flexible antennas must maintain proper electrical or radiation characteristics despite the variation of their structure given by the flexibility. Consequently, the reconfiguration mechanism of the proposed antenna allows the shift of the antenna resonance, making the antenna capable of maintaining an acceptable impedance matching over the operating band even when the antenna is folded.A compact high gain and front-to-back ratio pattern reconfigurable antenna for spatial filtering in IoT networks is then proposed. The reconfiguration mechanism is based on the use of a low-insertion, low-on resistance SP4T switch, which can be numerically controlled by a microcontroller, as required by IoT applications. Successively, a slot-based electronically steerable parasitic array radiator (ESPAR) antenna suitable for IoT applications is presented. The work describes in-depth the design procedure of the antenna, addressing the practical implementation of the reconfiguration mechanism, and focusing on the realization of the prototype and its experimental evaluation.Finally, a methodology for synthesizing parasitic antenna arrays is proposed. The method is based on the use of a Particle Swarm Optimizer (PSO), which iteratively optimizes the parasitic element loads until the desired pattern behavior is obtained. In order to assess the method's ability to address the desired goals, the methodology is used to optimize the directivity, the front-to-back ratio, and the gain of compact parasitic array antennas for IoT devices. The impedance loads values identified with this approach are integrated into the antenna structures to realize the parasitic antenna array. Reconfiguration can then simply be obtained by rotating the load's values over the parasitic elements
Couillet, Romain. "Application of random matrix theory to future wireless flexible networks". Phd thesis, Supélec, 2010. http://tel.archives-ouvertes.fr/tel-00808022.
Pełny tekst źródłaNohava, Lena. "Concepts for Wearable Technology in MR : Lightweight Flexible Radio Frequency Coils and Optical Wireless Communication Flexible multi-turn multi-gap coaxial RF coils: design concept and implementation for Magnetic Resonance Imaging at 3 and 7 Tesla Perspectives in Wireless Radio Frequency Coil Development for Magnetic Resonance Imaging". Thesis, université Paris-Saclay, 2020. http://www.theses.fr/2020UPAST069.
Pełny tekst źródłaThis PhD thesis work was conducted at the BioMaps laboratory at the Université Paris-Saclay and the Center for Medical Physics and Biomedical Engineering (CMPBME) at the Medical University of Vienna.To improve diagnostic value in MRI, shorter acquisitions, more efficient patient handling and improved image quality are needed. Wearable technology with optimized hardware reduces weight, increases flexibility, and could be wireless, thereby improving sensitivity, comfort, safety, and usability.In this work, flexible self-resonant coaxial transmission line resonators were investigated. Coaxial coils with multiple turns and gaps enable size optimization depending on the target application. The design was first studied in silico. Numerous prototypes were constructed and their performance was tested on the bench and in 3 and 7 T MRI. Coaxial coils were shown to be robust against bending, have no SAR penalty and improve SNR and transmit efficiency when form-fitted.A review of wireless MR, associated hardware developments and data transmission technology is given.An optical wireless communication module for sensor data transmission was demonstrated experimentally.Wearable coaxial coils offer an attractive alternative to standard coils due to low weight and flexibility. With wireless motion sensors diagnostic value in e.g. breast, knee, or cardiac MRI could be increased
Gueye, Mouhamadou. "Magnetic thin films on flexible substrates : magnetomechanical study by ferromagnetic resonance". Thesis, Sorbonne Paris Cité, 2017. http://www.theses.fr/2017USPCD007/document.
Pełny tekst źródłaThin films deposited on flexible substrates have been widely studied in the last decades due to the numerous applications in flexible electronics. Recently, flexible electronics have been extended to magnetic materials leading to the so-called emerging feld of flexible magnetoelectronics which is actually at the cutting-edge of spintronics research topics.This thesis is devoted to the study magnetomechanical properties of magnetic thin films (Ni, NiFe, Co2FeAl, CoFeB, FeCuNbSi) on flexible substrates. Structural analysis have 130 Abstracts hown that the Ni and CFA films are found to be polycrystalline with no strong preferred orientations ; the CFB film is amorphous. Consequently, the elastic and magnetoelastic properties are isotropic. For the study of the magnetomechanical properties, a set-up based on a jointly use of deformation test (bending or piezoactuation), ferromagnetic resonance (FMR) and digital image correlation (DIC) have been developped. Thanks to this method, it is possible to follow the evolution of the inescapable residual anisotropy encountered in magnetic thin films on flexible substrates under deformation and to determine the effective coefficient of magnetostriction of the films (sometimes unknown).This residual anisotropy is ascribed to contrasted mechanical strength when a sti thin film is deposited on a compliant substrate. The effect of the annealing temperature on the elastic and magnetoelastic have been studied carefully in CFB validating then theinterest on such alloys for spintronics applications. Finally, we have employed FMR inits sweep frequency mode to study the effective evolution of magnetization direction as function of the voltage-induced strains. A 90-degree magnetization rotation in Co2FeAl thin film on Kapton® polyimide substrate is observed
Zhang, Irene Y. (Irene Yun). "Efficient file distribution in a flexible,wide-area file system". Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/53188.
Pełny tekst źródłaCataloged from PDF version of thesis.
Includes bibliographical references (p. 63-65).
WheelFS is a wide-area distributed file system designed to help applications cope with the challenges of sharing data over the wide-area network. A wide range of applications can use WheelFS as a storage layer because applications can control various trade-offs in WheelFS, such as consistency versus availability, using semantic cues. One key feature that many applications require from any storage system is efficient file distribution. The storage system needs to be able to serve files quickly, even large or popular ones, and allow users and applications to quickly browse files. Wide-area links with high latency and low throughput make achieving these goals difficult for most distributed storage systems. This thesis explores using pre fetching, a traditional file system optimization technique, in wide-area file systems for more efficient file distribution. This thesis focuses on Tread, a pref etcher for WheelFS. Tread includes several types of pre fetching to improve the performance of reading files and directories in WheelFS: read-ahead pre fetching, whole file prefetching, directory prefetching and a prefetching optimization for WheelFS's built-in cooperative caching. To makes the best use of scarce wide-area resources, Tread adaptively rate-limits prefetching and gives applications control over what and how prefetching is done using WheelFS's semantic cues. Experiments show that Tread can reduce the time to read a 10MB file in WheelFS by 40% and the time to list a directory with 100 entries by more than 80%.
(cont.) In addition, experiments on Planetlab show that using prefetching with cooperative caching to distribute a 10MB file to 270 clients reduces the average latency for each client to read the file by almost 45%.
by Irene Y. Zhang.
M.Eng.
Książki na temat "Fil flexible"
Siegel, Alexander W. Deceit: A flexible distributed file system. Ithaca, NY: Dept. of Computer Science, Cornell University, 1990.
Znajdź pełny tekst źródłaSkipidarov, Sergey, i Mikhail Nikitin, red. Thin Film and Flexible Thermoelectric Generators, Devices and Sensors. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-45862-1.
Pełny tekst źródłaVidor, Fábio Fedrizzi, Gilson Inácio Wirth i Ulrich Hilleringmann. ZnO Thin-Film Transistors for Cost-Efficient Flexible Electronics. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72556-7.
Pełny tekst źródłaNational Bureau of Standards. Flexible disk cartridge labelling and file structure for information interchange. Gaithersburg, MD: U.S. Dept. of Commerce/National Bureau of Standards, 1986.
Znajdź pełny tekst źródłaArmstrong, Peter. Flexible Rails: Flex 3 on Rails 2. Greenwich, CT: Manning Publishing, 2007.
Znajdź pełny tekst źródłaArmstrong, Peter. Flexible Rails: Flex 3 on Rails 2. Greenwich, CT: Manning Publishing, 2007.
Znajdź pełny tekst źródłaSchwanebeck, Wieland. Der flexible Mr. Ripley: Männlichkeit und Hochstapelei in Literatur und Film. Köln: Böhlau Verlag, 2014.
Znajdź pełny tekst źródłaF, Hepp Aloysius, i NASA Glenn Research Center, red. Multi-junction thin-film solar cells on flexible substrates for space power. Cleveland, Ohio: National Aeronautics and Space Administration, Glenn Research Center, 2002.
Znajdź pełny tekst źródłaF, Hepp Aloysius, i NASA Glenn Research Center, red. Multi-junction thin-film solar cells on flexible substrates for space power. Cleveland, Ohio: National Aeronautics and Space Administration, Glenn Research Center, 2002.
Znajdź pełny tekst źródłaF, Hepp Aloysius, i NASA Glenn Research Center, red. Multi-junction thin-film solar cells on flexible substrates for space power. Cleveland, Ohio: National Aeronautics and Space Administration, Glenn Research Center, 2002.
Znajdź pełny tekst źródłaCzęści książek na temat "Fil flexible"
Reese, Matthew O., i Teresa M. Barnes. "Flexible Glass in Thin Film Photovoltaics". W Flexible Glass, 211–46. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781118946404.ch7.
Pełny tekst źródłaZhang, Ye, Lie Wang, Yang Zhao i Huisheng Peng. "Flexible Thin-Film Lithium-Ion Batteries". W Flexible Batteries, 9–37. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003273677-2.
Pełny tekst źródłaErlat, Ahmet Gün, Min Yan i Anil R. Duggal. "Substrates and Thin-Film Barrier Technology for Flexible Electronics". W Flexible Electronics, 413–49. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-74363-9_13.
Pełny tekst źródłaJunghähnel, Manuela, i John Fahlteich. "Thin-Film Deposition on Flexible Glass by Plasma Processes". W Flexible Glass, 129–79. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781118946404.ch5.
Pełny tekst źródłaHuang, YongAn, YeWang Su i Shan Jiang. "Buckling of Film-on-Substrate System in Flexible Electronics". W Flexible Electronics, 27–56. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-6623-1_2.
Pełny tekst źródłaMcDonald, Paul. "Flexible Stardom". W A Companion to American Indie Film, 493–520. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781118758359.ch22.
Pełny tekst źródłaSazonov, Andrei, Denis Striakhilev i Arokia Nathan. "Low-temperature Amorphous and Nanocrystalline Silicon Materials and Thin-film Transistors". W Flexible Electronics, 53–73. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-74363-9_3.
Pełny tekst źródłaGleskova, Helena, I.-Chun Cheng, Sigurd Wagner i Zhigang Suo. "Mechanical Theory of the Film-on-Substrate-Foil Structure: Curvature and Overlay Alignment in Amorphous Silicon Thin-Film Devices Fabricated on Free-Standing Foil Substrates". W Flexible Electronics, 29–51. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-74363-9_2.
Pełny tekst źródłaHecht, David, i George Grüner. "Solution Cast Films of Carbon Nanotubes for Transparent Conductors and Thin Film Transistors". W Flexible Electronics, 297–328. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-74363-9_10.
Pełny tekst źródłaTakenobu, Taishi. "Carbon Nanotube Thin-Film Transistors". W Large Area and Flexible Electronics, 117–32. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2015. http://dx.doi.org/10.1002/9783527679973.ch3.
Pełny tekst źródłaStreszczenia konferencji na temat "Fil flexible"
Rovati, Luigi, Stefano Cattini, Paola Fabbri i Luca Ferrari. "Fluorescence pH Sensor Based on Polymer Film". W 2018 International Flexible Electronics Technology Conference (IFETC). IEEE, 2018. http://dx.doi.org/10.1109/ifetc.2018.8583976.
Pełny tekst źródłaLi, Ling. "Surface Potential Based Compact Model for Thin Film Transistor". W 2018 International Flexible Electronics Technology Conference (IFETC). IEEE, 2018. http://dx.doi.org/10.1109/ifetc.2018.8583907.
Pełny tekst źródłaHasan, Md Mehedi, i Jin Jang. "Highly Robust Oxide Thin Film Transistors for Stretchable Electronics". W 2018 International Flexible Electronics Technology Conference (IFETC). IEEE, 2018. http://dx.doi.org/10.1109/ifetc.2018.8583949.
Pełny tekst źródłaKong, Sungwon, Heetaek Lim, Andreas Hoessinger i Eric Guichard. "Mechanical Stress Simulation of Thin Film Transistor on Flexible Substrate". W 2018 International Flexible Electronics Technology Conference (IFETC). IEEE, 2018. http://dx.doi.org/10.1109/ifetc.2018.8583964.
Pełny tekst źródłaMyny, Kris. "Flexible Internet-of-Things Circuits Based on Thin-Film Transistors". W 2018 International Flexible Electronics Technology Conference (IFETC). IEEE, 2018. http://dx.doi.org/10.1109/ifetc.2018.8584024.
Pełny tekst źródłaLee, Yongwoo, Jimin Kwon, Woojo Kim i Sungjune Jung. "Flexible Printed Top-Contact Organic Thin-Film Transistors". W 2019 IEEE International Flexible Electronics Technology Conference (IFETC). IEEE, 2019. http://dx.doi.org/10.1109/ifetc46817.2019.9073708.
Pełny tekst źródłaLanthaler, Albert Heinrich, Federica Catania, Hugo De Souza Oliveira, Carlos Beltrami, Alejandro Carrasco-Pena, Michael Haller, Niko Münzenrieder i Giuseppe Cantarella. "Thin-Film Temperature Sensor on Flexible PEEK Fabric". W 2023 IEEE International Flexible Electronics Technology Conference (IFETC). IEEE, 2023. http://dx.doi.org/10.1109/ifetc57334.2023.10254939.
Pełny tekst źródłaCantarella, Giuseppe, Federica Catania, Dianne Corsino i Niko Münzenrieder. "Unobtrusive Thin-Film Devices and Sustainable Green Electronics". W 2023 IEEE International Flexible Electronics Technology Conference (IFETC). IEEE, 2023. http://dx.doi.org/10.1109/ifetc57334.2023.10254853.
Pełny tekst źródłaSappati, Kiran Kumar, i Sharmistha Bhadra. "0–3 Polymer/Barium Titanate Nano Structures Based Flexible Piezoelectric Film". W 2018 International Flexible Electronics Technology Conference (IFETC). IEEE, 2018. http://dx.doi.org/10.1109/ifetc.2018.8583922.
Pełny tekst źródłaTokito, Shizuo. "Flexible Printed Organic Thin-Film Transistor Devices and Integrated Circuit Applications". W 2018 International Flexible Electronics Technology Conference (IFETC). IEEE, 2018. http://dx.doi.org/10.1109/ifetc.2018.8583876.
Pełny tekst źródłaRaporty organizacyjne na temat "Fil flexible"
Halevy, B., i T. Haynes. Parallel NFS (pNFS) Flexible File Layout. RFC Editor, sierpień 2018. http://dx.doi.org/10.17487/rfc8435.
Pełny tekst źródłaSiegel, Alex, Kenneth Birman i Keith Marzullo. Deceit: A Flexible Distributed File System. Fort Belvoir, VA: Defense Technical Information Center, grudzień 1989. http://dx.doi.org/10.21236/ada215937.
Pełny tekst źródłaSiegel, Alex, Kenneth Birman i Keith Marzullo. Deceit: A Flexible Distributed File System. Fort Belvoir, VA: Defense Technical Information Center, listopad 1989. http://dx.doi.org/10.21236/ada218620.
Pełny tekst źródłaDean, David M. Flexible Ultra Moisture Barrier Film for Thin-Film Photovoltaic Applications. Office of Scientific and Technical Information (OSTI), październik 2012. http://dx.doi.org/10.2172/1057661.
Pełny tekst źródłaKumar, Puneet, i Mahadev Satyanarayanan. Flexible and Safe Resolution of File Conflicts,. Fort Belvoir, VA: Defense Technical Information Center, listopad 1994. http://dx.doi.org/10.21236/ada289342.
Pełny tekst źródłaCulik, J. S., J. A. Rand, Y. Bai, J. R. Bower, J. R. Cummings, I. Goncharovsky, R. Jonczyk, P. E. Sims, R. B. Hall i A. M. Barnett. Silicon-Film{trademark} Solar Cells by a Flexible Manufacturing System. Office of Scientific and Technical Information (OSTI), wrzesień 1999. http://dx.doi.org/10.2172/12181.
Pełny tekst źródłaFunkenbusch, Arnie, i Charles Ruth. Ultra Barrier Topsheet Film for Flexible Photovoltaics with 3M Company. Office of Scientific and Technical Information (OSTI), grudzień 2014. http://dx.doi.org/10.2172/1166732.
Pełny tekst źródłaWestgate, Sr, i Charles R. Thin Film Photovoltaic Cells on Flexible Substrates Integrated with Energy Storage. Fort Belvoir, VA: Defense Technical Information Center, lipiec 2012. http://dx.doi.org/10.21236/ada563841.
Pełny tekst źródłaGursul, Ismet. Interaction of Vortex Breakdown with a Flexible Fin and its Control. Fort Belvoir, VA: Defense Technical Information Center, luty 2001. http://dx.doi.org/10.21236/ada387213.
Pełny tekst źródłaForrest, Stephen R. Inverted Organic Photovoltaic Cells on Lightweight, and Flexible Metal Foil Substrates. Fort Belvoir, VA: Defense Technical Information Center, marzec 2011. http://dx.doi.org/10.21236/ada546867.
Pełny tekst źródła