Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Fiber Reinforced Plastic (FRP).

Rozprawy doktorskie na temat „Fiber Reinforced Plastic (FRP)”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Fiber Reinforced Plastic (FRP)”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Desjarlais, Justin J. "An Examination of Crack Growth in Wood-FRP Bonds". Fogler Library, University of Maine, 2007. http://www.library.umaine.edu/theses/pdf/DesjarlaisJJ2007.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Soong, Wai How. "Bonding between the concrete and Fiber Reinforced Plastic, FRP, rods". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/MQ62851.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Hu, Shenghua, i 胡盛华. "FRP-strengthened RC slabs anchored with FRP anchors". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2011. http://hub.hku.hk/bib/B47849800.

Pełny tekst źródła
Streszczenie:
Existing reinforced concrete (RC) structure can be strengthened upon the addition of externally bonded high-strength light-weight fibre-reinforced polymer (FRP) composites. An abundance of research over the last two decades has established the effectiveness of the externally bonded FRP via extensive experimental testing. Perhaps the most commonly occurring failure mode though is premature debonding of the FRP and debonding generally occurs at strains well below the strain capacity of the FRP. Debonding failures are undesirable as they are typically brittle and represent an under-utilisation of the FRP material. A straightforward means to prevent or at least delay debonding is by the addition of mechanical anchors, however, research to date on anchors is extremely limited. Of the various anchor concepts examined to date by researchers, this dissertation will focus on anchors made from FRP which are herein referred to as FRP anchors. The details and results of a program of research on the performance of FRP anchors in FRP-strengthened structures are presented in this dissertation. An extensive review of exiting literature helps establish knowledge gaps which serve to justify the need and the scope of the research reported herein. A novel bow-tie FRP anchor concept is then proposed and tested in smaller-scale single-shear FRP-to-concrete joint assemblages as well as larger-scale simply-supported FRP-strengthened RC slabs. The anchors are shown to increase the strength and slip capacity of the joints by up to 41 % and almost 600 %, respectively, in comparison with unanchored control joints. The anchors are then shown to increase the load and deflection capacity of slabs by 30 % and 110 %, respectively, above an unanchored control slab. In addition to strength, it is the ability of FRP anchors to introduce deformability into FRP-strengthened RC slabs which is particularly beneficial in order to produce safer structures. An analytical model is then developed which is based on a novel quad-linear moment-curvature response which can capture the complete load-deflection response of the FRP-strengthened slabs anchored with FRP anchors. The analytical modeling approach enables closed-form equations to be derived which can then be used by design engineers to relatively easily construct load-deflections responses and accurately predict member responses. Following the concluding comments for the project as a whole, future research topics of relevance are identified.
published_or_final_version
Civil Engineering
Master
Master of Philosophy
Style APA, Harvard, Vancouver, ISO itp.
4

Krishnaswamy, Vijayarajan. "Durability of nanoclay FRP bars for concrete members". Morgantown, W. Va. : [West Virginia University Libraries], 2006. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4568.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2006.
Title from document title page. Document formatted into pages; contains xvi, 204 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 155-158).
Style APA, Harvard, Vancouver, ISO itp.
5

Trimble, Brent Stephen. "Durability and mode-I fracture of fiber-reinforced plastic (FRP)/wood interface bond". Morgantown, W. Va. : [West Virginia University Libraries], 1999. http://etd.wvu.edu/templates/showETD.cfm?recnum=888.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 1999.
Title from document title page. Document formatted into pages; contains xvi, 192 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 180-183).
Style APA, Harvard, Vancouver, ISO itp.
6

Tung, Wang Kei. "FRP debonding from concrete substrate : theoretical and experimental approach /". View Abstract or Full-Text, 2002. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202002%20TUNG.

Pełny tekst źródła
Streszczenie:
Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2002.
Includes bibliographical references (leaves 109-110). Also available in electronic version. Access restricted to campus users.
Style APA, Harvard, Vancouver, ISO itp.
7

Lau, Tak-bun Denvid. "Flexural ductility improvement of FRP-reinforced concrete members". Click to view the E-thesis via HKUTO, 2006. http://sunzi.lib.hku.hk/hkuto/record/B38907756.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Littles, Jerrol W. Jr. "Ultrasonic characterization of Fiber Reinforced Polymeric (FRP) composites". Diss., Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/19160.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Zhang, Huawen, i 张华文. "Influence of FRP anchors on FRP-to-concrete bonder interfaces". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2013. http://hub.hku.hk/bib/B49799551.

Pełny tekst źródła
Streszczenie:
Existing reinforced concrete (RC) structural members such as beams, columns and joints can be strengthened and repaired with externally bonded high-strength and light-weight fibre-reinforced polymer (FRP) composites. The effectiveness of such strengthening can, however, be limited by premature debonding of the FRP at strains well below the strain capacity of the FRP. Such failures are also generally sudden and give rise to brittle member behavour. It is therefore important to prevent or even delay debonding failure in order for the FRP strengthening to be more effectively and efficiently used. Anchorage of the FRP strengthening is a logical solution and to date several different types of anchorage systems have been developed and tested. Anchors made from FRP, which are herein referred to as FRP anchors, are singled out for deeper inspection in this doctoral program of research. FRP anchors are an attractive form of anchorage as they are non-corrosive, relatively easily made by hand, and can be used in a variety of shaped RC elements ranging from beams to walls. There have been limited systematic studies though conducted on anchorage devices including FRP anchors. This knowledge gap forms the scope of the program of doctoral research reported herein. This dissertation is concerned with investigating the ability of FRP anchors to anchor externally bonded FRP in flexural strengthening applications. This is done by investigating the influence of FRP anchors on FRP-to-concrete bonded interfaces. Following a review of relevant literature, tests on FRP-to-concrete joints anchored with FRP anchors are reported as well as tests on FRP-strengthened RC slabs anchored with FRP anchors. The joint tests are used to investigate and understand the influence of key geometric and material properties such as, but not limited to, anchor type and position as well as plate length. The optimal arrangement of FRP anchors enabled significant increases in FRP plate strain utilisation to be achieved in the joints. Two modelling approaches based on regression analysis as well as partial interaction modelling are developed for the modelling of the joint tests. In the latter method of analysis, the complete debonding process is able to be simulated. The test and modelling results of the joint specimens are then used to design anchorage schemes for application to RC slabs strengthened in flexure with externally bonded FRP plates. The slab test results show the importance of strategic FRP anchor installation for enhancing the strength, ductility and deformability of FRP-strengthened RC slabs. Future research needs are finally presented in light of the outcomes of the experimental and analytical components of the research reported herein.
published_or_final_version
Civil Engineering
Doctoral
Doctor of Philosophy
Style APA, Harvard, Vancouver, ISO itp.
10

Lau, Tak-bun Denvid, i 劉特斌. "Flexural ductility improvement of FRP-reinforced concrete members". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B38907756.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
11

Tsang, Terry Kin Chung. "Behaviour of concrete beams reinforced with hybrid FRP composite rebars /". View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202006%20TSANGT.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
12

Souza, Benjamin J. "Fracture Mechanics Characterization of WPC-FRP Composite Materials Fabricated by the Composites Pressure Resin Infusion System (Compris) Process Volume I (Chapters 1-7, Appendix A)". Fogler Library, University of Maine, 2005. http://www.library.umaine.edu/theses/pdf/SouzaBJ2005.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
13

Barger, John D. "Effects of aging on bond between FRP and concrete". Morgantown, W. Va. : [West Virginia University Libraries], 2000. http://etd.wvu.edu/templates/showETD.cfm?recnum=1288.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2000.
Title from document title page. Document formatted into pages; contains xi, 102 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 86-87).
Style APA, Harvard, Vancouver, ISO itp.
14

Sahirman, Sidharta. "Fiber reinforced polymer (FRP) bridge deck life-cycle cost analysis". Morgantown, W. Va. : [West Virginia University Libraries], 2009. http://hdl.handle.net/10450/10666.

Pełny tekst źródła
Streszczenie:
Thesis (Ph. D.)--West Virginia University, 2009.
Title from document title page. Document formatted into pages; contains xii, 153 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 129-136).
Style APA, Harvard, Vancouver, ISO itp.
15

Howard, Isaac. "Development of lightweight FRP bridge deck designs and evaluations". Morgantown, W. Va. : [West Virginia University Libraries], 2002. http://etd.wvu.edu/templates/showETD.cfm?recnum=2628.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2002.
Title from document title page. Document formatted into pages; contains xvii, 167 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 134-138).
Style APA, Harvard, Vancouver, ISO itp.
16

Botting, Joshua Keith. "Development of an FRP Reinforced Hardwood Glulam Guardrail". Fogler Library, University of Maine, 2003. http://www.library.umaine.edu/theses/pdf/BottingJK2003.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
17

Hong, Yong. "Fatigue and Fracture of the FRP-Wood Interface: Experimental Characterization and Performance Limits". Fogler Library, University of Maine, 2003. http://www.library.umaine.edu/theses/pdf/HongY2003.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
18

Shekar, Vimala. "Advancement in FRP composites using 3-D stitched fabrics and enhancement in FRP bridge deck component properties". Morgantown, W. Va. : [West Virginia University Libraries], 2000. http://etd.wvu.edu/templates/showETD.cfm?recnum=1303.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2000.
Title from document title page. Document formatted into pages; contains xiii, 143 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 85-89).
Style APA, Harvard, Vancouver, ISO itp.
19

Carlin, Daniel Edward. "Experimental and numerical characterization of damage in FRP beams". Thesis, Georgia Institute of Technology, 1994. http://hdl.handle.net/1853/21465.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
20

Weaver, Craig Aaron. "Behavior of FRP-Reinforced Glulam-Concrete Composite Bridge Girders". Fogler Library, University of Maine, 2002. http://www.library.umaine.edu/theses/pdf/WeaverCA2002.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
21

Gao, Bo. "FRP strengthened RC beams : taper design and theoretical analysis /". View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?MECH%202005%20GAO.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
22

Sasher, William C. "Testing, assessment and FRP strengthening of concrete T-beam bridges in Pennsylvania". Morgantown, W. Va. : [West Virginia University Libraries], 2008. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5876.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2008.
Title from document title page. Document formatted into pages; contains viii, 177 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 130-136).
Style APA, Harvard, Vancouver, ISO itp.
23

Yang, Yong. "The failure analysis of FRP strengthened concrete beam /". View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202003%20YANG.

Pełny tekst źródła
Streszczenie:
Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2003.
Includes bibliographical references (leaves 106-109). Also available in electronic version. Access restricted to campus users.
Style APA, Harvard, Vancouver, ISO itp.
24

Chung, Chu Fung. "Flexural strengthening of beams with FRP under various loading configurations /". View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202004%20CHUNG.

Pełny tekst źródła
Streszczenie:
Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2004.
Includes bibliographical references (leaves 138-142). Also available in electronic version. Access restricted to campus users.
Style APA, Harvard, Vancouver, ISO itp.
25

Xu, Han. "Development of FRP-Glulam Panel for Bridge Deck Replacement". Fogler Library, University of Maine, 2001. http://www.library.umaine.edu/theses/pdf/XuH2001.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
26

Wan, Jing, i 萬婧. "An investigation of FRP-to-timber bonded interfaces". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/197543.

Pełny tekst źródła
Streszczenie:
Timber has been used as a construction material in civil infrastructure throughout the world for several millennia and it is still a popular construction material to this day. Degradation of timber due to mechanical and environmental actions, as well as possible higher loads, can necessitate the need for strengthening or repair. The external bonding of fibre-reinforced polymer (FRP) composites offers a viable solution. A lack of understanding of the strength and behaviour of FRP-to-timber bonded interfaces is, however, hindering the safe and rational design of FRP strengthening measures for timber structures. The aim of this research project is to enhance understanding of the strength and behaviour of the bonded interface between timber and FRP. Important tangible outcomes of the project include the development of effective bonding systems as well as bond stress-slip models and bond strength model which quantify the bonded interface. In order to achieve these outcomes, an extensive experimental and analytical investigation is conducted. Tests are performed and reported on FRP-to-timber joints as well as FRP-strengthened beams. For the former, softwood (Pine), hardwood (Camphorwood) and glulam timber products have been tested. Variables include (i) externally bonded (EB) plates and near-surface mounted (NSM) plates, (ii) FRP plates formed in a wet lay-up procedure and pultrusion, (iii) bonded length of FRP, (iv) adhesive type, (v) adhesive thickness, (vi) timber species, and (vii) natural growth characteristics of the timber such as annual growth rings and knots. The concept of an effective bond length has been verified from the tests as well as effective procedures and materials for bonding FRP to softwoods and hardwoods. Models are also proposed and validated to quantify the bond strength and bond stress-slip relationships of the joint tests. The strengthening methods are then applied to glulam beams in order to observe the behaviour and strength of the bonding systems on a larger scale as well as on a system that bends. The bond strength model proposed from the joint tests is then assessed against the beam tests. Finally, conclusions are made on the entire program of study. Then, recommendations for future research are proposed.
published_or_final_version
Civil Engineering
Doctoral
Doctor of Philosophy
Style APA, Harvard, Vancouver, ISO itp.
27

Meunier, Marion. "Dynamic analysis of FRP laminated and sandwich plates". Thesis, University of Southampton, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.342851.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
28

Bangalore, Gurudutt S. "Nondestructive evaluation of FRP composite members using infrared thermography". Morgantown, W. Va. : [West Virginia University Libraries], 2002. http://etd.wvu.edu/templates/showETD.cfm?recnum=2419.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2002.
Title from document title page. Document formatted into pages; contains viii, 101 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 98-101).
Style APA, Harvard, Vancouver, ISO itp.
29

Punyamurthula, Deepthi. "Structural performance of low-profile FRP composite celluar modules". Morgantown, W. Va. : [West Virginia University Libraries], 2005. https://etd.wvu.edu/etd/controller.jsp?moduleName=documentdata&jsp%5FetdId=3815.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2005
Title from document title page. Document formatted into pages; contains xi, 91 p. : ill. (some col.) Includes abstract. Includes bibliographical references (p. 83-85).
Style APA, Harvard, Vancouver, ISO itp.
30

Lonkar, Gajanan M. "Computer aided detection of defects in FRP bridge decks using infrared thermography". Morgantown, W. Va. : [West Virginia University Libraries], 2005. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4368.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2005.
Title from document title page. Document formatted into pages; contains xii, 129 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 120-123).
Style APA, Harvard, Vancouver, ISO itp.
31

Righman, Jennifer. "Development of an innovative connection for FRP bridge decks to steel girders". Morgantown, W. Va. : [West Virginia University Libraries], 2002. http://etd.wvu.edu/templates/showETD.cfm?recnum=2392.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2002.
Title from document title page. Document formatted into pages; contains viii, 114 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 112-114).
Style APA, Harvard, Vancouver, ISO itp.
32

Pan, Jinlong. "Crack-induced debonding failure in fiber reinforced plastics (FRP) strengthened concrete beams : experimental and theoretical analysis /". View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202005%20PAN.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
33

Tipirneni, Raja Ram. "Characterization of thermal and electrical properties of fiber reinforced polymer (FRP) composites". Morgantown, W. Va. : [West Virginia University Libraries], 2008. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5932.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2008.
Title from document title page. Document formatted into pages; contains xii, 117 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 116-117).
Style APA, Harvard, Vancouver, ISO itp.
34

Steele, William Edward. "Detection of subsurface anomalies in fiber reinforced polymer (FRP) wrapped timber bridge components using infrared thermography". Morgantown, W. Va. : [West Virginia University Libraries], 2001. http://etd.wvu.edu/templates/showETD.cfm?recnum=2190.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2001.
Title from document title page. Document formatted into pages; contains xxxiv, 312 p. : ill. (some col.), col. map. Includes abstract. Includes bibliographical references (p. 305-312).
Style APA, Harvard, Vancouver, ISO itp.
35

Richie, Matthew. "Fatigue Behavior of FRP-Reinforced Douglas-Fir Glued Laminated Bridge Girders". Fogler Library, University of Maine, 2003. http://www.library.umaine.edu/theses/pdf/RichieMC2003.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
36

Taher, Khorramabadi Seyed Mehdi. "FRP bond behaviour during intermediate concrete cover separation in flexurally strengthened RC beams". Thesis, University of Cambridge, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.609048.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
37

Gamache, Christopher P. "Preliminary Investigation on the Durability of FRP Reinforced Glulam Bridge Girders". Fogler Library, University of Maine, 2001. http://www.library.umaine.edu/theses/pdf/GamacheCP2001.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
38

Robinson, Justin Mark. "Analytical and experimental study of FRP honeycomb sandwich panels with sinusoidal core". Morgantown, W. Va. : [West Virginia University Libraries], 2001. http://etd.wvu.edu/templates/showETD.cfm?recnum=2093.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2001.
Title from document title page. Document formatted into pages; contains xi, 127 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 127).
Style APA, Harvard, Vancouver, ISO itp.
39

Tripathi, Vijay Kumar. "Standardization of test methods for property evaluation of FRP bars". Morgantown, W. Va. : [West Virginia University Libraries], 2003. https://etd.wvu.edu/etd/controller.jsp?moduleName=documentdata&jsp%5FetdId=3238.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2003
Title from document title page. Document formatted into pages; contains xiii, 186 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 147-155).
Style APA, Harvard, Vancouver, ISO itp.
40

Boyd, Curtis Barton. "A Load-Deflection Study of Fiber-Reinforced Plastics as Reinforcement in Concrete Bridge Decks". Thesis, Virginia Tech, 1997. http://hdl.handle.net/10919/9591.

Pełny tekst źródła
Streszczenie:
Approximately fifty percent of the bridges in the United States are considered deficient. The deterioration of the concrete components is a leading cause of the problem. The deterioration of concrete bridge decks is due primarily to corrosion of the reinforcing steel in the concrete. A promising solution to the problem is the use of fiber reinforced plastics (FRP) as a replacement for reinforcing steel. The use of FRP as reinforcement has the following advantages of lightweight, high tensile strength, corrosion resistance, flexibility, and electromagnetic resistance. This paper looks at the use of FRP as reinforcement in concrete beams and compares the information from deflection measurements of different configurations. Also, a material cost comparison is made to determine the cost of using the FRP reinforcement over standard steel reinforcement. Concrete bridge deck systems are designed using steel and fiber-reinforced plastics and allowable stress and load resistance factor methods. Recommendations for further study and uses of FRP are made.
Master of Science
Style APA, Harvard, Vancouver, ISO itp.
41

Aluri, Srinivas. "Updating low-profile FRP deck FE model using experimental modal analysis". Morgantown, W. Va. : [West Virginia University Libraries], 2006. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4656.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2006.
Title from document title page. Document formatted into pages; contains vi, 76 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 60-61).
Style APA, Harvard, Vancouver, ISO itp.
42

Boyapati, Siva Kumar. "Finite element analysis of low-profile FRP bridge deck (Prodec 4)". Morgantown, W. Va. : [West Virginia University Libraries], 2006. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4945.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2006.
Title from document title page. Document formatted into pages; contains xv, 147 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 145-147).
Style APA, Harvard, Vancouver, ISO itp.
43

Justice, Adam L. "Testing and assessment of FRP strengthened concrete T-beam bridges in Pennsylvania". Morgantown, W. Va. : [West Virginia University Libraries], 2010. http://hdl.handle.net/10450/11255.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2010.
Title from document title page. Document formatted into pages; contains ix, 223 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 138-141).
Style APA, Harvard, Vancouver, ISO itp.
44

Ghosh, Kumar Kanti. "Assessment of FRP composite strengthened reinforced concrete bridge structures at the component and systems level through progressive damage and Non-Destructive Evaluation (NDE)". Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2006. http://wwwlib.umi.com/cr/ucsd/fullcit?p3211930.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
45

Brayack, Daniel A. "Technical and economic effectiveness for repair with FRP of concrete T-beam bridges case study for PennDOT-District 3 /". Morgantown, W. Va. : [West Virginia University Libraries], 2006. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4684.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--West Virginia University, 2006.
Title from document title page. Document formatted into pages; contains x, 95 p. : ill. (some col.), col. maps. Includes abstract. Includes bibliographical references (p. 83-84).
Style APA, Harvard, Vancouver, ISO itp.
46

Luk, Herman Chi Yung. "FRP-strengthened beam : interfacial failure and development of empirical design approach /". View Abstract or Full-Text, 2002. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202002%20LUK.

Pełny tekst źródła
Streszczenie:
Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2002.
Includes bibliographical references (leaves 216-222). Also available in electronic version. Access restricted to campus users.
Style APA, Harvard, Vancouver, ISO itp.
47

Tascioglu, Cihat. "Impact of Preservative Treatments and Fungal Exposure on Phenolic Fiber Reinforced Polymer (FRP) Composite Material Utilized in Wood Reinforcement". Fogler Library, University of Maine, 2002. http://www.library.umaine.edu/theses/pdf/TasciogluC2002.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
48

Murphy, Neil. "Feasibility Analysis of a Fiber Reinforced Polymer Bridge". Thesis, KTH, Bro- och stålbyggnad, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-125348.

Pełny tekst źródła
Streszczenie:
When implementing a bridge design proposal, it is common that several alternatives be considered, each with a different material of construction. Traditional building materials used for the construction of bridges have mainly been concrete, steel, timber or aluminium. With all these materials options, maintenance and replacement costs throughout the lifespan of a bridge make up for a large proportion of their total life cycle costs. Fiber Reinforced Polymer (FRP) provides a new viable construction material, which can be implemented in bridge construction. This plastic based material has favourable material properties such a very high strength to weight ratio, high corrosion resistance and durability, as well as very low maintenance costs over its lifetime. In the feasibility analysis, a case study of an existing FRP deck bridge was taken and examined in three aspects: structural, economic and environmental. The bridge was also redesigned with a concrete deck solution, to provide a comparison to a conventional construction material. The results were found, in general to be favourable towards the FRP solution. From the structural analysis savings on deflection, support reactions and superstructure stresses were outputted. Economically, the composite material was found to have a substantial higher initial cost but much lower periodic maintenance costs than the concrete option. Finally the FRP bridge option displayed a lower construction time for the superstructure, at one third of that of concrete and an overall lower environmental impact, based on material production and the overall bridge construction process.
Style APA, Harvard, Vancouver, ISO itp.
49

Walkenhauer, Brian John. "Seismic retrofit of cruciform-shaped columns in the Aurora Avenue Bridge using FRP wrapping". Pullman, Wash. : Washington State University, 2010. http://www.dissertations.wsu.edu/Thesis/Spring2010/b_walkenhauer_060110.pdf.

Pełny tekst źródła
Streszczenie:
Thesis (M.S. in civil engineering)--Washington State University, May 2010.
Title from PDF title page (viewed on June 23, 2010). "Department of Civil and Environmental Engineering." Includes bibliographical references (p. 90-91).
Style APA, Harvard, Vancouver, ISO itp.
50

Poulin, John P. "Bond and Static Bending Strength of FRP-Reinforced Glulam Beams Using Western Wood Species. Vol. 1". Volume 1 Volume 2, 2001. http://www.library.umaine.edu/theses/theses.asp?Cmd=abstract&ID=CIE2001-002.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii