Artykuły w czasopismach na temat „Fabrication additive hybride”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Fabrication additive hybride”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.
Berger, Uwe. "1808 A Survey on Hybrid Fabrication Processes by Integration of Additive and Subtractive Manufacturing". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2015.8 (2015): _1808–1_—_1808–6_. http://dx.doi.org/10.1299/jsmelem.2015.8._1808-1_.
Pełny tekst źródłaGutierrez, Cassie, Rudy Salas, Gustavo Hernandez, Dan Muse, Richard Olivas, Eric MacDonald, Michael D. Irwin i in. "CubeSat Fabrication through Additive Manufacturing and Micro-Dispensing". International Symposium on Microelectronics 2011, nr 1 (1.01.2011): 001021–27. http://dx.doi.org/10.4071/isom-2011-tha4-paper3.
Pełny tekst źródłaKumar, Sanjay, Pulak Bhushan, Mohit Pandey i Shantanu Bhattacharya. "Additive manufacturing as an emerging technology for fabrication of microelectromechanical systems (MEMS)". Journal of Micromanufacturing 2, nr 2 (17.06.2019): 175–97. http://dx.doi.org/10.1177/2516598419843688.
Pełny tekst źródłaLi, Yan, Dichen Li, Bingheng Lu, Dajing Gao i Jack Zhou. "Current status of additive manufacturing for tissue engineering scaffold". Rapid Prototyping Journal 21, nr 6 (19.10.2015): 747–62. http://dx.doi.org/10.1108/rpj-03-2014-0029.
Pełny tekst źródłaHe, Liu, Peiren Wang, Lizhe Wang, Min Chen, Haiyun Liu i Ji Li. "Multifunctional Polymer-Metal Lattice Composites via Hybrid Additive Manufacturing Technology". Micromachines 14, nr 12 (30.11.2023): 2191. http://dx.doi.org/10.3390/mi14122191.
Pełny tekst źródłaLey, Jazmin, Cristian Pantea, John Greenhall i Joseph A. Turner. "Resonant ultrasound spectroscopy of hybrid metal additive manufacturing". Journal of the Acoustical Society of America 154, nr 4_supplement (1.10.2023): A150. http://dx.doi.org/10.1121/10.0023085.
Pełny tekst źródłaZhong, Fanchao, Haisen Zhao, Haochen Li, Xin Yan, Jikai Liu, Baoquan Chen i Lin Lu. "VASCO: Volume and Surface Co-Decomposition for Hybrid Manufacturing". ACM Transactions on Graphics 42, nr 6 (5.12.2023): 1–17. http://dx.doi.org/10.1145/3618324.
Pełny tekst źródłaBerktas, Ilayda, Ali Nejad Ghafar, Patrick Fontana, Ayten Caputcu, Yusuf Menceloglu i Burcu Saner Okan. "Facile Synthesis of Graphene from Waste Tire/Silica Hybrid Additives and Optimization Study for the Fabrication of Thermally Enhanced Cement Grouts". Molecules 25, nr 4 (17.02.2020): 886. http://dx.doi.org/10.3390/molecules25040886.
Pełny tekst źródłaHinton, Jack, Dejan Basu, Maria Mirgkizoudi, David Flynn, Russell Harris i Robert Kay. "Hybrid additive manufacturing of precision engineered ceramic components". Rapid Prototyping Journal 25, nr 6 (8.07.2019): 1061–68. http://dx.doi.org/10.1108/rpj-01-2019-0025.
Pełny tekst źródłaKrokoszinski, H. ‐J, H. Oetzmann, H. Gernoth i C. Schmidt. "Additive thin film technology for hybrid circuit fabrication". Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 3, nr 6 (listopad 1985): 2704–7. http://dx.doi.org/10.1116/1.572821.
Pełny tekst źródłaFreeman, Amihay, Yael Dror, Carmit Ophir Porat, Noa Hadar i Yossi Shacham Diamand. "Silver-Coated Biologically Active Protein Hybrids: Antimicrobial Applications". Applied Mechanics and Materials 749 (kwiecień 2015): 453–56. http://dx.doi.org/10.4028/www.scientific.net/amm.749.453.
Pełny tekst źródłaZafar, Muhammad Qasim, Jinnan Wang, Zhenlin Zhang, Chaochao Wu, Haiyan Zhao, Ghulam Hussain i Ninshu Ma. "Thermomechanical Process Simulation and Experimental Verification for Laser Additive Manufacturing of Inconel®718". Materials 16, nr 7 (24.03.2023): 2595. http://dx.doi.org/10.3390/ma16072595.
Pełny tekst źródłaWu, Wenzheng, Haiming Wang, Jiaqi Wang, Qingping Liu, Zheng Zhang, Ke Li, Yuhan Gong, Ji Zhao, Luquan Ren i Guiwei Li. "Hybrid Additive Manufacturing of Fused Filament Fabrication and Ultrasonic Consolidation". Polymers 14, nr 12 (12.06.2022): 2385. http://dx.doi.org/10.3390/polym14122385.
Pełny tekst źródłaPragana, João P. M., Stephan Rosenthal, Ivo M. F. Bragança, Carlos M. A. Silva, A. Erman Tekkaya i Paulo A. F. Martins. "Hybrid Additive Manufacturing of Collector Coins". Journal of Manufacturing and Materials Processing 4, nr 4 (9.12.2020): 115. http://dx.doi.org/10.3390/jmmp4040115.
Pełny tekst źródłaBaskar, Arun V., Jefrin M. Davidraj, Ajanya M. Ruban, Stalin Joseph, Gurwinder Singh, Ala'a H. Al-Muhtaseb, Jang Mee Lee, Jiabao Yi i A. Vinu. "Fabrication of Mesoporous C60/Carbon Hybrids with 3D Porous Structure for Energy Storage Applications". Journal of Nanoscience and Nanotechnology 21, nr 3 (1.03.2021): 1483–92. http://dx.doi.org/10.1166/jnn.2021.19141.
Pełny tekst źródłaJeong, Jooyoung, Jia Lee, Jinuk Kim, Jinyoung Chun, DongGyu Kang, Seung Min Han, Changshin Jo i Jinwoo Lee. "A biopolymer-based functional separator for stable Li metal batteries with an additive-free commercial electrolyte". Journal of Materials Chemistry A 9, nr 12 (2021): 7774–81. http://dx.doi.org/10.1039/d0ta12153c.
Pełny tekst źródłaHong, Quan, Lan Jiang, Sumei Wang, Ji Huang, Jiaxin Sun, Xin Li, Pei Zuo, Jiangang Yin i Jiangang Lu. "One-Step In Situ Patternable Reduction of a Ag–rGO Hybrid Using Temporally Shaped Femtosecond Pulses". Materials 15, nr 2 (12.01.2022): 563. http://dx.doi.org/10.3390/ma15020563.
Pełny tekst źródłaPhung, Thanh Huy, Anton Nailevich Gafurov, Inyoung Kim, Sung Yong Kim, Kyoung Min Kim i Taik-Min Lee. "Hybrid Device Fabrication Using Roll-to-Roll Printing for Personal Environmental Monitoring". Polymers 15, nr 12 (15.06.2023): 2687. http://dx.doi.org/10.3390/polym15122687.
Pełny tekst źródłaKovacev, Nikolina, Sheng Li, Weining Li, Soheil Zeraati-Rezaei, Athanasios Tsolakis i Khamis Essa. "Additive Manufacturing of Novel Hybrid Monolithic Ceramic Substrates". Aerospace 9, nr 5 (7.05.2022): 255. http://dx.doi.org/10.3390/aerospace9050255.
Pełny tekst źródłaClassen, Martin, Jan Ungermann i Rahul Sharma. "Additive Manufacturing of Reinforced Concrete—Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement". Applied Sciences 10, nr 11 (29.05.2020): 3791. http://dx.doi.org/10.3390/app10113791.
Pełny tekst źródłaSaunders, Jacob, Mohammad Elbestawi i Qiyin Fang. "Ultrafast Laser Additive Manufacturing: A Review". Journal of Manufacturing and Materials Processing 7, nr 3 (5.05.2023): 89. http://dx.doi.org/10.3390/jmmp7030089.
Pełny tekst źródłaDe Marzi, Anna, Giulio Giometti, Johannes Erler, Paolo Colombo i Giorgia Franchin. "Hybrid additive manufacturing for the fabrication of freeform transparent silica glass components". Additive Manufacturing 54 (czerwiec 2022): 102727. http://dx.doi.org/10.1016/j.addma.2022.102727.
Pełny tekst źródłaMin, Chunying, Zengbao He, Haojie Song, Dengdeng Liu, Wei Jia, Jiamin Qian, Yuhui Jin i Li Guo. "Fabrication of Novel CeO2/GO/CNTs Ternary Nanocomposites with Enhanced Tribological Performance". Applied Sciences 9, nr 1 (4.01.2019): 170. http://dx.doi.org/10.3390/app9010170.
Pełny tekst źródłaIngle, Dr A. H., Dilip Patle, Shashank Dhawade, Shahrukh Khan, Habib Quraishi i Swapnil Ingole. "Fabrication of Hybrid Engine Vehicle". International Journal for Research in Applied Science and Engineering Technology 11, nr 5 (31.05.2023): 2187–90. http://dx.doi.org/10.22214/ijraset.2023.51596.
Pełny tekst źródłaPittiglio, Alexandra, Ailey Simpson, Vanessa Costalonga Martins i Hanaa Dahy. "Fibrx Rocking Chair: Design and Application of Tailored Timber as an Embedded Frame for Natural Fibre-Reinforced Polymer (NFRP) Coreless Winding". Polymers 15, nr 3 (18.01.2023): 495. http://dx.doi.org/10.3390/polym15030495.
Pełny tekst źródłaAmend, Philipp, Oliver Hentschel, Chritian Scheitler, Andrey Igorevich Gorunov i Michael Schmidt. "Effect of Additive Manufactured Metallic Structures on Laser-Based Thermal Joining of Thermoplastic Metal Hybrids". Key Engineering Materials 651-653 (lipiec 2015): 777–82. http://dx.doi.org/10.4028/www.scientific.net/kem.651-653.777.
Pełny tekst źródłaSaptaji, Kushendarsyah, Dindamilenia Choirunnisa Hardiyasanti, Muchammad Fachrizal Ali, Raffy Frandito i Tiara Kusuma Dewi. "Potential Applications of Hydroxyapatite-Mineralized-Collagen Composites as Bone Structure Regeneration: a Review". JOURNAL OF SCIENCE AND APPLIED ENGINEERING 5, nr 1 (16.03.2022): 33. http://dx.doi.org/10.31328/jsae.v5i1.3577.
Pełny tekst źródłaHolzer, K., L. Maier, V. Böhm i W. Volk. "Dimensional precision and wear of a new approach for prototype tooling in deep drawing". IOP Conference Series: Materials Science and Engineering 1284, nr 1 (1.06.2023): 012078. http://dx.doi.org/10.1088/1757-899x/1284/1/012078.
Pełny tekst źródłaJiménez, Amaia, Prveen Bidare, Hany Hassanin, Faris Tarlochan, Stefan Dimov i Khamis Essa. "Powder-based laser hybrid additive manufacturing of metals: a review". International Journal of Advanced Manufacturing Technology 114, nr 1-2 (19.03.2021): 63–96. http://dx.doi.org/10.1007/s00170-021-06855-4.
Pełny tekst źródłaStanlykeninxavier, L., P. Elangovan i M. S. S. Saravanakumaar. "Fabrication of Non-precious Vanadium Tungsten Nanocomposite for Enhanced Electrocatalytic Oxygen Reduction Reaction". Asian Journal of Chemistry 33, nr 4 (20.03.2021): 919–24. http://dx.doi.org/10.14233/ajchem.2021.23097.
Pełny tekst źródłaHao, Jingbin, Xin Chen, Hao Liu i Shengping Ye. "A novel process planning algorithm for additive and subtractive manufacturing based on skeleton tree matching". Rapid Prototyping Journal 24, nr 2 (12.03.2018): 441–62. http://dx.doi.org/10.1108/rpj-11-2016-0179.
Pełny tekst źródłaMondal, Sudeepta, Daniel Gwynn, Asok Ray i Amrita Basak. "Investigation of Melt Pool Geometry Control in Additive Manufacturing Using Hybrid Modeling". Metals 10, nr 5 (22.05.2020): 683. http://dx.doi.org/10.3390/met10050683.
Pełny tekst źródłaPlaczek, Gerrit, i Patrick Schwerdtner. "Concrete Additive Manufacturing in Construction: Integration Based on Component-Related Fabrication Strategies". Buildings 13, nr 7 (11.07.2023): 1769. http://dx.doi.org/10.3390/buildings13071769.
Pełny tekst źródłaMangrulkar, Mayuribala, i Keith J. Stevenson. "The Progress of Additive Engineering for CH3NH3PbI3 Photo-Active Layer in the Context of Perovskite Solar Cells". Crystals 11, nr 7 (13.07.2021): 814. http://dx.doi.org/10.3390/cryst11070814.
Pełny tekst źródłaLomte, Amulya, i Bhisham Sharma. "Effect of geometrical defects on the acoustical and transport properties of periodic porous absorbers manufactured using stereolithography". INTER-NOISE and NOISE-CON Congress and Conference Proceedings 266, nr 2 (25.05.2023): 273–82. http://dx.doi.org/10.3397/nc_2023_0039.
Pełny tekst źródłaKumar, Mohit, i Varun Sharma. "Additive manufacturing techniques for the fabrication of tissue engineering scaffolds: a review". Rapid Prototyping Journal 27, nr 6 (5.07.2021): 1230–72. http://dx.doi.org/10.1108/rpj-01-2021-0011.
Pełny tekst źródłaMelzer, Jeffrey E., i Euan McLeod. "3D Nanophotonic device fabrication using discrete components". Nanophotonics 9, nr 6 (6.06.2020): 1373–90. http://dx.doi.org/10.1515/nanoph-2020-0161.
Pełny tekst źródłaSong, Jian, Qidong Huo, Dongming Li, Bingzhi Chen i Jun Zhang. "Energy-Absorption Behavior of Novel Bio-Inspired Thin-Walled Honeycomb Tubes Filled with TPMS Structure". Coatings 14, nr 6 (27.05.2024): 675. http://dx.doi.org/10.3390/coatings14060675.
Pełny tekst źródłaKilian, David, Max von Witzleben, Matthew Lanaro, Cynthia S. Wong, Corina Vater, Anja Lode, Mark C. Allenby, Maria A. Woodruff i Michael Gelinsky. "3D Plotting of Calcium Phosphate Cement and Melt Electrowriting of Polycaprolactone Microfibers in One Scaffold: A Hybrid Additive Manufacturing Process". Journal of Functional Biomaterials 13, nr 2 (8.06.2022): 75. http://dx.doi.org/10.3390/jfb13020075.
Pełny tekst źródłaBelle, Stefan, Babette Goetzendorfer i Ralf Hellmann. "Challenges in a Hybrid Fabrication Process to Generate Metallic Polarization Elements with Sub-Wavelength Dimensions". Materials 13, nr 22 (22.11.2020): 5279. http://dx.doi.org/10.3390/ma13225279.
Pełny tekst źródłaLiu, Shuning, Chenchen Liu, Yong You, Yajie Wang, Renbo Wei i Xiaobo Liu. "Fabrication of BaTiO3-Loaded Graphene Nanosheets-Based Polyarylene Ether Nitrile Nanocomposites with Enhanced Dielectric and Crystallization Properties". Nanomaterials 9, nr 12 (22.11.2019): 1667. http://dx.doi.org/10.3390/nano9121667.
Pełny tekst źródłaZhang, Heng, Quanqing Han, Xin Gao, Xiaoning Tang, Keli Chen i Meng Li. "Impact of reinforcing additives on the structure and performance of composite films based on regenerated cellulose from corn stalk pith". BioResources 14, nr 4 (10.09.2019): 8455–69. http://dx.doi.org/10.15376/biores.14.4.8455-8469.
Pełny tekst źródłaGjokaj, Vincens, John Papapolymerou, John D. Albrecht i Premjeet Chahal. "Design and Fabrication of Additively Manufactured Hybrid Rigid-Flex RF Components". IEEE Transactions on Components, Packaging and Manufacturing Technology 9, nr 4 (kwiecień 2019): 779–85. http://dx.doi.org/10.1109/tcpmt.2019.2900210.
Pełny tekst źródłaDugar, Jaka, Awais Ikram, Damjan Klobčar i Franci Pušavec. "Sustainable Hybrid Manufacturing of AlSi5 Alloy Turbine Blade Prototype by Robotic Direct Energy Layered Deposition and Subsequent Milling: An Alternative to Selective Laser Melting?" Materials 15, nr 23 (3.12.2022): 8631. http://dx.doi.org/10.3390/ma15238631.
Pełny tekst źródłaA Whitmore, Stephen. "Development and testing of an all-additively manufactured hybrid thruster for smallsats". Aeronautics and Aerospace Open Access Journal 5, nr 2 (10.08.2021): 66–81. http://dx.doi.org/10.15406/aaoaj.2021.05.00129.
Pełny tekst źródłaAseni, Paolo, Tommaso Santaniello, Francesco Rizzetto, Lorenzo Gentili, Federico Pezzotta, Francesco Cavaliere, Maurizio Vertemati i Paolo Milani. "Hybrid Additive Fabrication of a Transparent Liver with Biosimilar Haptic Response for Preoperative Planning". Diagnostics 11, nr 9 (21.09.2021): 1734. http://dx.doi.org/10.3390/diagnostics11091734.
Pełny tekst źródłaKapusuzoglu, Berkcan, i Sankaran Mahadevan. "Physics-Informed and Hybrid Machine Learning in Additive Manufacturing: Application to Fused Filament Fabrication". JOM 72, nr 12 (26.10.2020): 4695–705. http://dx.doi.org/10.1007/s11837-020-04438-4.
Pełny tekst źródłaLutter-Günther, Max, Stephan Wagner, Christian Seidel i Gunther Reinhart. "Economic and Ecological Evaluation of Hybrid Additive Manufacturing Technologies Based on the Combination of Laser Metal Deposition and CNC Machining". Applied Mechanics and Materials 805 (listopad 2015): 213–22. http://dx.doi.org/10.4028/www.scientific.net/amm.805.213.
Pełny tekst źródłaJiao, Junke, Shengyuan Sun, Zifa Xu, Jiale Wang, Liyuan Sheng i Jicheng Gao. "Fabricating Inner Channels in Laser Additive Manufacturing Process via Thin-Plate-Preplacing Method". Materials 16, nr 19 (26.09.2023): 6406. http://dx.doi.org/10.3390/ma16196406.
Pełny tekst źródłaIngle, Dr A. H. "Literature Review on the Fabrication of Hybrid Engine Vehicle". International Journal for Research in Applied Science and Engineering Technology 11, nr 6 (30.06.2023): 592–96. http://dx.doi.org/10.22214/ijraset.2023.53637.
Pełny tekst źródła