Gotowa bibliografia na temat „Experimentation on yarns and composite materials”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Experimentation on yarns and composite materials”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Experimentation on yarns and composite materials"
Yazdanshenas, Mohammad Esmail, Rogheih Damerchely, Abo Saied Rashidi i Ramin Khajavi. "Bioactive Nano-Composite Multifilament Yarns". Journal of Engineered Fibers and Fabrics 7, nr 1 (marzec 2012): 155892501200700. http://dx.doi.org/10.1177/155892501200700108.
Pełny tekst źródłaDemircan, Ozgur, Shinsuke Ashibe, Tatsuya Kosui i Asami Nakai. "Modeling of tensile and bending properties of biaxial weft knitted composites". Science and Engineering of Composite Materials 22, nr 3 (1.05.2015): 303–13. http://dx.doi.org/10.1515/secm-2013-0274.
Pełny tekst źródłaQi, Ye Xiong, Jia Lu Li i Liang Sen Liu. "Bending Properties of Three-Layer Biaxial Weft Knitted Fabric Reinforced Composite Materials". Advanced Materials Research 295-297 (lipiec 2011): 1217–20. http://dx.doi.org/10.4028/www.scientific.net/amr.295-297.1217.
Pełny tekst źródłaRAIMONDO, L., i M. H. ALIABADI. "MULTISCALE PROGRESSIVE FAILURE ANALYSIS OF PLAIN-WOVEN COMPOSITE MATERIALS". Journal of Multiscale Modelling 01, nr 02 (kwiecień 2009): 263–301. http://dx.doi.org/10.1142/s1756973709000141.
Pełny tekst źródłaSarioğlu, Esin, i Osman Babaarslan. "A Study on Physical Properties of Microfilament Composite Yarns". Journal of Engineered Fibers and Fabrics 11, nr 3 (wrzesień 2016): 155892501601100. http://dx.doi.org/10.1177/155892501601100310.
Pełny tekst źródłaWang, Yu, Xuejiao Li, Junbo Xie, Ning Wu, Yanan Jiao i Peng Wang. "Numerical and Experimental Investigation on Bending Behavior for High-Performance Fiber Yarns Considering Probability Distribution of Fiber Strength". Textiles 3, nr 1 (18.02.2023): 129–41. http://dx.doi.org/10.3390/textiles3010010.
Pełny tekst źródłaHuang, Chien-Lin, Yu-Tien Huang, Ting-Ting Li, Chia-Hsuan Chiang, Ching-Wen Lou i Jia-Horng Lin. "Composite processing and property evaluation of far-infrared/electromagnetic shielding bamboo charcoal/phase change material/stainless steel elastic composite fabrics". Journal of Polymer Engineering 36, nr 2 (1.03.2016): 211–20. http://dx.doi.org/10.1515/polyeng-2015-0080.
Pełny tekst źródłaYalcinkaya, Fatma, Michal Komarek, Daniela Lubasova, Filip Sanetrnik i Jiri Maryska. "Preparation of Antibacterial Nanofibre/Nanoparticle Covered Composite Yarns". Journal of Nanomaterials 2016 (2016): 1–7. http://dx.doi.org/10.1155/2016/7565972.
Pełny tekst źródłaJaouachi, B., M. Ben Hassen i F. Sakli. "STRENGTH OF WET SPLICED DENIM YARNS AFTER SIZING USING A CENTRAL COMPOSITE DESIGN". AUTEX Research Journal 7, nr 3 (1.09.2007): 159–65. http://dx.doi.org/10.1515/aut-2007-070302.
Pełny tekst źródłaMatsumoto, Hidetoshi, Shinji Imaizumi, Yuichi Konosu, Minoru Ashizawa, Mie Minagawa, Akihiko Tanioka, Wei Lu i James M. Tour. "Electrospun Composite Nanofiber Yarns Containing Oriented Graphene Nanoribbons". ACS Applied Materials & Interfaces 5, nr 13 (26.06.2013): 6225–31. http://dx.doi.org/10.1021/am401161b.
Pełny tekst źródłaRozprawy doktorskie na temat "Experimentation on yarns and composite materials"
Roiron, Coline. "Contribution à la caractérisation thermomécanique d’un polyéthylène auto-renforcé et de ses « recyclats » : Effet des paramètres du procédé de moulage par compression". Electronic Thesis or Diss., Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique, 2022. http://www.theses.fr/2022ESMA0004.
Pełny tekst źródłaReducing energy consumption is an essential issue for today's society. In order to achieve a sustainable energy transition, especially in the field of transportation, new and more demanding regulations are being implemented. The keywords are to increase the proportion of recycled and recyclable materials and lightening structural parts.The use of polymers can be a solution. However, to guarantee good mechanical resistance, the use of self-reinforced composites(SRP) is a lever for action. They are composed of a polymer or a family of polymers in two physical states, one to form the matrix and the second for the reinforcement. They present a low density, interesting mechanical behavior, and increased recyclability. To understand the behavior of a self-reinforced polyethylene and to be able to consider the use of this material for a given application,it is essential to understand the behavior of each of its components. If the behavior of more conventional composites, such as glass or carbon fiber reinforced thermoplastic matrix composites, is well understood, using thermoplastic reinforcements such as UHMWPE (Ultra-High Molecular Weight PolyEthylene) within the composite makes the understanding of the behavior of SRP more complex. The impact of temperature and time on the mechanical response of the reinforcements is then examined in a first step, and the observations are related to microstructural considerations. A test protocol has been proposed and validated before hand. A solid-phase transition is highlighted around 49°C and generates an abrupt behavior change.These UHMWPE reinforcements are integrated into composites. A compression molding process is suggested to process them in a single step from a matrix in granular form. The effect of different process parameters is evaluated to propose an optimal combination.The short and long-term mechanical response in tension and creep is then analyzed, and the interest of the SRPE thus designed is highlighted. Indeed, the benefit of its use is evident, especially at low temperatures. Moreover, the presence of thermoplastic reinforcements seems to introduce additional parameters that affect the behavior of the composites and, in particular, in creep. The precise characterization and the knowledge of the transition temperatures of the latter appeared then determining, mainly since the transitions depend on the microstructure of the reinforcement and thus on the type of stretching and the applied conditions. Finally, the recyclability of the implemented composites is studied since it constitutes a driving force for the development of SRP on the market
POLVERINO, SALVATORE. "Graphene-based construction materials: experimentation and application development". Doctoral thesis, Università degli studi di Genova, 2021. http://hdl.handle.net/11567/1058131.
Pełny tekst źródłaGarrett, Joseph Daniel. "Experimentation of Mode I and Mode II Fracture of Uni-Directional Composites and Finite Element Analysis of Mode I Fracture Using Cohesive Contact". DigitalCommons@CalPoly, 2016. https://digitalcommons.calpoly.edu/theses/1670.
Pełny tekst źródłaAbdul, Ghafour Tarek. "Analyse des irréversibilités lors de la mise en forme des renforts de composites". Thesis, Lyon, 2018. http://www.theses.fr/2018LYSEI083/document.
Pełny tekst źródłaIn the industrial context of shaping composite materials with fibrous reinforcements, the numerical simulation tool has become an integral part of process improvement. Today, numerical simulations of shaping fibrous reinforcements are mostly based on a macroscopic approach and continuous material models that have been assumed to be nonlinear elastic, thus reversible. However, under non-monotonous loading paths, the fibrous reinforcement shows significant irreversibility, particularly related to sliding between yarns and between fibers. First of all, we will try to characterize the importance of irreversibilities by cyclic tests (bending, in-plan shearing, compression) carried out on woven reinforcements. The second part consists in looking for behavior models that describe bending and in-plane shear irreversibilities to implement them in a finite element code. A validation of these behavior models is made by comparing simulation and experimental results of bending and in-plane shear identification tests. This part is realized on PlasFib, a software developed by INSA Lyon, based on finite element code in large deformation, proposing a macroscopic semi-discrete approach of fibrous reinforcements. The third part of the study will consist in simulating the shaping process of different industrial parts (or inspired by industrial parts). This will aim first at identifying loading cases apt to produce non-monotonous loading paths (in bending and in-plane shear) during the shaping process ; and second, at studying the importance of using irreversible models to simulate these shaping processes by comparing the results of simulations obtained with reversible behavior models with those obtained for irreversible behavior models
Gaumond, Baptiste. "Compréhension des interfaces / interphases formées dans les composites PPS / fibres de carbone et PPS / fibres de basalte réalisés à partir de mèches comélées et retordues". Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI064.
Pełny tekst źródłaThis thesis work is devoted to the understanding of the structure-properties relationships of composite materials made from hybrid rovings composed of the thermoplastic matrix, polyphenylene sulphide, and reinforcements that can be either carbon or basalt. Thus, several lines of research have been pursued in this work: i) the impact of the commingling process on the final properties of composites, ii) the understanding of fiber-matrix interactions and iii) the optimization of those interactions in the interface. This work first demonstrated the link established between the mechanical and structural properties of the hybrid yarns and the mechanical properties of composite materials. The air commingling process degrades the resistance of the fibers and this is observed both on filaments tensile tests and commingled yarns. This degradation is not observed on twisted yarns. In the same time, composites based on commingled yarns show a better homogeneity, mechanical properties and a lower porosity rate. In a second step, the adhesion developped in all composite systems was evaluated at the micromechanical scale and correlated at the macroscopic scale. Accelerated ageing tests were also carried out to discriminate the most durable solutions. A final part of this work is devoted to the optimization of the interfacial properties of the systems studied. Two solutions were developed and gave interesting results: the use of a PPS / PE-EMA-GMA polymer mixture allowed to improve up to 56% the IFSS with basalt fibers and the use of an imidazolium salt as interfacial agent in the matrix allowed to improve by 25% the IFSS obtained with carbon fibers
Książki na temat "Experimentation on yarns and composite materials"
Effects of material degradation on the structural integrity of composite materials: Experimental investigation and modeling of high temperature degradation mechanisms : final report for grant NAG3-1760. [Washington, DC: National Aeronautics and Space Administration, 1996.
Znajdź pełny tekst źródłaCzęści książek na temat "Experimentation on yarns and composite materials"
Mäder, Edith, Christina Rothe, Harald Brünig i Thomas Leopold. "Online Spinning of Commingled Yarns-Equipment and Yarn Modification by Tailored Fibre Surfaces". W Advances in Composite Materials and Structures, 229–32. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.229.
Pełny tekst źródłaRomani, Alessia, Raffaella Suriano, Andrea Mantelli, Marinella Levi, Paolo Tralli, Jussi Laurila i Petri Vuoristo. "Composite Finishing for Reuse". W Systemic Circular Economy Solutions for Fiber Reinforced Composites, 167–90. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-22352-5_9.
Pełny tekst źródłaAlagirusamy, R., i A. Das. "Yarns: Production, processability and properties". W Fibrous and Composite Materials for Civil Engineering Applications, 29–61. Elsevier, 2011. http://dx.doi.org/10.1533/9780857095583.1.29.
Pełny tekst źródłaChevalier, C., C. Kerisit, A. Klavzar, F. Boussu i D. Coutellier. "Measurements of dynamic properties of ballistic yarns using innovative testing devices". W Advanced Fibrous Composite Materials for Ballistic Protection, 199–215. Elsevier, 2016. http://dx.doi.org/10.1016/b978-1-78242-461-1.00007-8.
Pełny tekst źródłaBose, Goutam Kumar, i Pritam Pain. "Surface Response Methodology Approach for Multi-Objective Optimization During Electrochemical Grinding of Al2O3/Al Interpenetrating Phase Composite". W Handbook of Research on Manufacturing Process Modeling and Optimization Strategies, 162–92. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-2440-3.ch008.
Pełny tekst źródłaLeticia, OGURI, ESCOBAR Marlem Guadalupe, PRETEL Ana María i GARCIA Nidia Miriam. "Ecological panel based on plastic aggregates, natural fibers, and plaster". W Handbook Science of Technology and Innovation, 49–64. ECORFAN, 2022. http://dx.doi.org/10.35429/h.2022.3.49.64.
Pełny tekst źródłaStreszczenia konferencji na temat "Experimentation on yarns and composite materials"
Lagoudas, Natasha C., i Zoubeida Ounaies. "Electrospinning of continuous piezoelectric yarns for composite application". W The 15th International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, redaktorzy Marcelo J. Dapino i Zoubeida Ounaies. SPIE, 2008. http://dx.doi.org/10.1117/12.790447.
Pełny tekst źródłaHernandez, Corey D., Mei Zhang, Shaoli Fang, Ray H. Baughman, Thomas S. Gates i Seun K. Kahng. "Multifunctional Characteristics of Carbon Nanotube (CNT) Yarn Composites". W ASME 2006 Multifunctional Nanocomposites International Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/mn2006-17028.
Pełny tekst źródłaSaito, Takeshi, Ryo Morimoto, Masaru Imamura, Akio Ohtani i Asami Nakai. "Dimensional and Internal Structural Design for Braided Fabric Reinforced Thermoplastic Composite". W ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64416.
Pełny tekst źródłaRahy, A., Changheon Kim, Sungwoo Ryu, Jaewon Hwang, Soon Hyung Hong i D. J. Yang. "Novel and versatile process for the preparation of polyvinyl alcohol composite carbon nanotube fibers/yarns". W 2011 IEEE Nanotechnology Materials and Devices Conference (NMDC 2011). IEEE, 2011. http://dx.doi.org/10.1109/nmdc.2011.6155344.
Pełny tekst źródłaEVERS, CECIL, KAYLEE THAGARD i JIN GYU PARK. "SCALABLE HIGH TENSILE MODULUS COMPOSITE LAMINATES USING CONTINUOUS CARBON NANOTUBE YARNS AND GAMMA RAY TREATMENT". W Proceedings for the American Society for Composites-Thirty Eighth Technical Conference. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/asc38/36666.
Pełny tekst źródłaDavis, Felecia, Julian Huang, Jimi Demi-Ajayi i Karen Kuo. "The Phototropic Fiber Composite Structure". W 108th Annual Meeting Proceedings. ACSA Press, 2020. http://dx.doi.org/10.35483/acsa.am.108.35.
Pełny tekst źródłaUddin, Mohammed Jasim, Tarik J. Dickens, Jin Yan, David O. Olawale, Okenwa I. Okoli i Federico Cesano. "Solid-State Dye Sensitized Optoelectronic Carbon Nanotube-Wires: An Energy Harvesting Damage Sensor With Nanotechnology Approach". W ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/smasis2012-8200.
Pełny tekst źródłaHamila, Nahiene, Philippe Boisse i Sylvain Chatel. "Meso-Macro Simulations of Textile Composite Forming". W ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72382.
Pełny tekst źródłaMADENCI, ERDOGAN, ATILA BARUT, AMIN YAGHOOBI, ZHIYANG YAO i YILE HU. "PERIDYNAMICS FOR MICROSTRUCTURAL DAMAGE MODELING OF 3D CARBON/CARBON (C/C) COMPOSITE MATERIALS". W Proceedings for the American Society for Composites-Thirty Eighth Technical Conference. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/asc38/36652.
Pełny tekst źródłaGustafson, Peter A., James R. Jastifer, John A. Kapenga i Joseph McKean. "Lack of statistical rigor in composite materials experimentation and lessons learned from the science of medicine". W 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2014. http://dx.doi.org/10.2514/6.2014-1201.
Pełny tekst źródła