Gotowe bibliografie tematyczne / EPC INDUSTRY

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „EPC INDUSTRY”

Autor: Grafiati
Data publikacji: 11 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „EPC INDUSTRY”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "EPC INDUSTRY"

1

Panji, Pringga Satria, i Lolom Evalita Hutabarat. "PERUBAHAN BIDANG JASA KONSTRUKSI DI ERA DISRUPSI DALAM TATARAN KONSEP EPC 4.0". Jurnal Rekayasa Teknik Sipil dan Lingkungan - CENTECH 1, nr 2 (31.10.2020): 75–83. http://dx.doi.org/10.33541/cen.v1i2.2066.

Pełny tekst źródła
Streszczenie:
Industri 4.0 sudah digaungkan oleh Pemerintah Republik Indonesia. Konsep dalam Industri 4.0 ini membutuhkan perubahan yang fundamental dalam setiap sendi-sendi kegiatan bisnis yang sudah sekian lama dilakukan. Business as usual, sebuah frasa yang tidak lagi berlaku untuk melakukan sebuah perubahan mendasar. Efisiensi dalam konteks digitalisasi proses bisnis EPC (Engineering, Procurement and Construction) sangat diperlukan saat ini. Terlebih jika kondisi perusahaan sedang dalam masa sulit atau resesi akibat pandemi covid-19, perlu penerapan konsep EPC 4.0 dengan penyesuaian terhadap kebutuhan perusahaan secara khusus dan negara secara umum. Banyak hal mendasar yang akan mengalami distraksi dalam industry EPC 4.0, antara lain hubungan antara pemilik proyek, kontraktor, sub-kontraktor dan supplier, kemudian pola rantai suplai barang dan material, organisasi, otomasi dan faktor sumber daya manusia
Style APA, Harvard, Vancouver, ISO itp.
2

Mariyati, Dwi. "Prinsip Hukum Dalam Penyusunan dan Pelaksanaan Kontrak Engineering Procurement Construction (Kontrak "EPC")". Yuridika 33, nr 2 (1.05.2018): 188. http://dx.doi.org/10.20473/ydk.v33i2.7412.

Pełny tekst źródła
Streszczenie:
The EPC Contract is the form of contract that is currently used by the contractors to take over construction work. The EPC Contract having three activities, the engineering design , procurement and construction execution, that are integrated. For the activity EPC Contract is the Single Contractor must be responsible for the design of jobs and accuracy, and requirement of the owner project, until construction. This contract type commonly have a high risk, the finals price, and the accuracy of the period for implementation. Characteristic of EPC Contract is industry building activities that are proces plant and industry plant. The purpose of which are going to achieved in EPC Contract to preset specifications to fulfill the requirements specified in terms of the time, the quality and expenses.The main issues in this legal research are the legal principle that is used in the preparation of EPC Contract and the principle of law in the implementation of EPC Contract in Indonesia. The type of research is the normative study and the approach of this research having four methods approach among others are statute approach, conceptual approach, cases approach, and comparative approach.The result of this research there are four the most important among others are the first is legislation, the second is the implementation of regulation, the third is EPC institution procurement and fourth is the form of EPC Contract.
Style APA, Harvard, Vancouver, ISO itp.
3

Ban, Tran Van, i Bonaventura H. W. Hadikusumo. "Culture EPC oil and gas project in Vietnam: grounded theory". International Journal of Energy Sector Management 11, nr 3 (4.09.2017): 366–86. http://dx.doi.org/10.1108/ijesm-04-2016-0009.

Pełny tekst źródła
Streszczenie:
Purpose Engineering-procurement-construction (EPC) projects in the oil and gas industry are special projects involving diverse cultures, behaviours and complexity in global business. Among these elements, culture is a crucial factor contributing to project performance. Several studies have been conducted on culture and its impact on project performance, especially in construction. However, studies on the cultural factors affecting EPC projects have not yet been carried out, especially for projects in the oil and gas industry. Thus, this study aims to explore and identify the cultural factors that affect the performance of oil and gas EPC projects in Vietnam. Design/methodology/approach In all, 60 people with experience in EPC projects were interviewed for the study. Axial and selective coding were used to build the final grounded theory. Findings The research findings show that the main cultural factors affecting the performance of EPC projects are leadership, organisation, planning, communication, human resources, goal and orientation. Originality/value This study provides empirical evidence for the importance of cultural factors that affect the success of EPC projects. It can serve as a guide on how to manage EPC projects and how to overcome the cultural difficulties in oil and gas EPC projects in Vietnam.
Style APA, Harvard, Vancouver, ISO itp.
4

Tanaka, H., i S. Bushuyev. "PROJECT MANAGEMENT IN THE GLOBAL OIL AND GAS INDUSTRY BY CO-CREATING STRATEGIC VALUE FOR THE INDUSTRY". Scientific Journal of Astana IT University, nr 6 (30.06.2021): 59–75. http://dx.doi.org/10.37943/aitu.2021.16.52.006.

Pełny tekst źródła
Streszczenie:
Project development and marketing on large oil and gas projects (LOGPs) by engineering-procurement-construction (EPC) contractors respond to massive capital investment (CAPEX) undertakings by oil and gas industry owners and takes on multi-lateral interactions carried out by a dozen actors proactively participating in the EPC contractors’ business ecosystem created to remain competitive toward owner companies, which form of project marketing is different from a straight forward contractor – owner interaction found in the other branches of contracting industry. Most of such interactions are based on strategic trust among the relevant members built over decades of heavy win-win transactions. This study has found the actors that compose the project development and marketing cycle in LOGPs, explored dominant logics of EPC contractor’s project development and marketing, and analysed how primary actors in LOGP development and implementation co-create strategic values for both the respective corporations and sustainable overall industry growth. The business ecosystem theory posits that a business ecosystem is an economic community supported by interacting organizations; the company holding a leadership role is valued by the community because it enables members to move toward shared visions to align their investments – this refers to the platform services theory and to find mutually supportive roles.
Style APA, Harvard, Vancouver, ISO itp.
5

Kadam, Prashant Pralhad. "Risk Management in Oil and Gas (EPC) Industry". International Journal for Research in Applied Science and Engineering Technology 9, nr 9 (30.09.2021): 1255–64. http://dx.doi.org/10.22214/ijraset.2021.38162.

Pełny tekst źródła
Streszczenie:
Abstract: The five most important risk factors identified in the design phase are 1] scope uncertainty, 2] failed management and planning, 3] changes in errors and omissions, 4] inadequate projectS team structure, 5] inadequate quality requirements. The top five risk factors determined by the procurement category are 1] Inadequate online resources and equipment, 2] Distribution of suppliers, 3] Uncertainty in design and style, codes, requirements and standards, 4] Defective items, and 5] Compromise. The 5 most important risk factors identified in the construction phase are 1] weak project capability, 2] excessive construction costs, 3] major construction delays, 4] strong project plan, and 5] poor safety management .This was initiated by the link between risk factors and the effects on price, quality and timing, as well as the potential for expensive, common, and high-quality outcomes. Keywords: Disaster risk management, risk management strategies, project risk management, oil and gas industry.
Style APA, Harvard, Vancouver, ISO itp.
6

Janakiram, Mani, i J. Bert Keats. "Combining SPC and EPC in a Hybrid Industry". Journal of Quality Technology 30, nr 3 (lipiec 1998): 189–200. http://dx.doi.org/10.1080/00224065.1998.11979848.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Wagner, Reinhard F. "EPC 4.0: The quest for reducing CAPEX in EPC projects". Organization, Technology and Management in Construction: an International Journal 12, nr 1 (27.07.2020): 2245–55. http://dx.doi.org/10.2478/otmcj-2020-0020.

Pełny tekst źródła
Streszczenie:
AbstractEngineering, procurement and construction (EPC) business in Europa is increasingly under pressure. Lack of productivity, low or negative profit margins for investors, and the lack of adopting necessary innovations and digitalization—from engineering activities through operations and maintenance to decommissioning—have caused significant deprivation of business and competitiveness compared to emerging providers in Asia. The quest for reducing capital expenditures (CAPEX) in EPC projects is intensifying. In May 2018, a research project was started to analyze the situation and key trends through desk research, to research how the challenges of the business could be tackled and to derive practical guidance for EPC contractors as well as for investors, owners, and operators (O/O). The project aimed to propose innovative ways of improving the EPC business model to reach the next level (“EPC 4.0”). In doing so, lessons learned from the automotive and aviation industry were considered. A key objective of the research project was to challenge statements of international EPC experts to cut CAPEX by 40–50% in EPC projects. With this statement in mind, the research focused on identifying measures with potential in six areas: (1) digitalization, (2) partnering, (3) flat supply chains, (4) flexible organizations, (5) core competences, and (6) the human factor. Summarizing the findings in these areas, the EPC 4.0 project came to a savings potential of up to 50% of the total budgeted project costs.
Style APA, Harvard, Vancouver, ISO itp.
8

Xie, Weijiang, Guangsha Zhou i Fangyuan Chen. "Development Suggestions of EPC Based on Electric Power Industry". Lecture Notes on Information Theory 2, nr 1 (2014): 117–20. http://dx.doi.org/10.12720/lnit.2.1.117-120.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Celeste, Robert, i Beth Ann Cusack. "EPCglobal Standards in the Pharmaceutical Industry: Toward a Safe and Secure Supply Chain". Journal of Pharmacy Practice 19, nr 4 (sierpień 2006): 244–49. http://dx.doi.org/10.1177/0897190006293510.

Pełny tekst źródła
Streszczenie:
This article focuses on the value of standards and the industry's work to date on an ePedigree standard, track-and-trace and electronic product code (EPC)/radio frequency identification (RFID). Parallels are drawn between the development of the bar code standard in the 1970s by EPCglobal's parent company, GS1 US, and the activities seen today in the EPC/RFID marketplace. The article also touches on issues such as patient privacy, item identification, sensor technology. Last, the article identifies areas other than counterfeit that may benefit from the standards that are being developed today.
Style APA, Harvard, Vancouver, ISO itp.
10

Wang, Shaowen, Xiaojun Liu i Weixing Shao. "Drivers of Engineering Procurement and Construction Model Adoption Behavior by Public Construction Owners in China". Sustainability 15, nr 15 (4.08.2023): 11996. http://dx.doi.org/10.3390/su151511996.

Pełny tekst źródła
Streszczenie:
The promotion of the EPC model in public construction projects is a priority for reform in the Chinese construction industry. This study integrates the push–pull–mooring (PPM) model with the stimulus-organism-response (SOR) framework to explore the influencing factors and action mechanisms of adopting the EPC model of the owners of public construction projects in China. An online questionnaire was sent to public construction project owners who have participated in EPC projects. Partial least squares-structural equation modeling (PLS-SEM) was employed to analyze the survey data. The results identified that the push factors for public construction project owners to the adoption of the EPC model include owners’ management ability, owner’s knowledge about EPC, and the matching degree between the owner’s management philosophy and EPC model; the pull factor is the performance pressure of the project; and the mooring factors include subjective norms, the maturity degree of the EPC, and the support environment. In addition, perceived usefulness, cognitive, and adoption attitude play a mediating role in the relationship between external stimuli and adoption behavior. Overall, this study enhances the understanding of Chinese public project owners’ behavior in adopting the EPC model and provides a theoretical basis for policy recommendations to promote the adoption of the EPC model by public construction project owners in China.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "EPC INDUSTRY"

1

Simon, Kai Artur. "BPR in the pharmaceutical industry /". Göteborg : Dept. of Informatics, Univ, 2003. http://www.handels.gu.se/epc/archive/00002874/01/simon.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Gebreeyesus, Mulu. "Essays on firm turnover, growth, and investment behavior in Ethiopian manufacturing /". Göteborg : Department of Economics, School of Business, Economics and Law [Nationalekonomiska institutionen], Göteborg University, 2006. http://www.handels.gu.se/epc/archive/00004827/01/Mulu%5Ffull.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Linde-Rahr, Martin. "Household economics of agriculture and forestry in rural Vietnam /". Göteborg : Dept. of Economics [Nationalekonomiska institutionen], Univ, 2002. http://www.handels.gu.se/epc/data/html/html/PDF/LindeRahrdissNEpdf.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Granér, Mats. "Essays on trade and productivity : case studies of manufacturing in Chile and Kenya /". Göteborg : Dept. of Economics, School of Economics and Commercial Law (Nationalekonomiska institutionen, Handelshögsk.), 2002. http://www.handels.gu.se/epc/data/html/html/PDF/GranerdissNE.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Xavier, Sayonara Mariluza Tapparo. "Contratos EPC para empreendimentos hidrelétricos e seus stakeholders". Florianópolis, SC, 2004. http://repositorio.ufsc.br/xmlui/handle/123456789/88177.

Pełny tekst źródła
Streszczenie:
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia de Produção.
Made available in DSpace on 2012-10-22T06:18:11Z (GMT). No. of bitstreams: 1 232188.pdf: 282677 bytes, checksum: 6d4f77187a96e974a1c9466dfd714216 (MD5)
Devido às mudanças ocorridas a partir 1993 na legislação que rege o Setor de Energia Elétrica Brasileiro, abrindo o mercado para as empresas privadas, tem-se notado grandes alterações no que se refere ao modo de contratação para implantação de grandes empreendimentos nesse Setor. O presente trabalho visa o estudo de uma nova forma de contratação para empreendimentos de geração de energia elétrica, onde o empreendedor ou contratante transfere, via contrato, todos os riscos de engenharia e construção à contratada. A contratada fica responsável pela realização dos trabalhos de engenharia e projetos, fornecimentos de materiais e equipamentos permanentes e construção do empreendimento, assumindo os riscos inerentes dessas atividades, ou seja, nesse tipo de contrato, o preço é global e está contemplado o fornecimento integral. Essa forma de contratação é chamada de Contrato EPC (Engineering, Procurement and Construction) Turn Key Lump Sum e nesse caso, o objeto da contratação é a entrega do empreendimento, pronto, acabado e operando. Esse trabalho compreende de uma pesquisa bibliográfica onde se procura descrever as características dessa forma de contratação e a identificação dos vários atores envolvidos no processo e partes interessadas, chamados de stakeholders, buscando com isso minimizar as dificuldades encontradas pelos gestores destes contratos.
Style APA, Harvard, Vancouver, ISO itp.
6

Jennings, Paul Anthony. "New applications of statistics within automotive EMC and pass-by noise". Thesis, University of Warwick, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.343798.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Schulte, Markus. "Industry, politics and trade discrimination in West Germany's European policy 1957-1963". Thesis, London School of Economics and Political Science (University of London), 1997. http://etheses.lse.ac.uk/2855/.

Pełny tekst źródła
Streszczenie:
This thesis addresses the German position in the negotiations on the British proposal for a Europe-wide free trade area, on the acceleration of the tariff schedule of the European Economic Community (EEC) in 1960, the formation of EFTA, and the first British application for membership of the EEC. To do this it analyses the attitudes, interests and lobbying efforts of German industry, West Germany's European policy from 1957 to 1963 after the establishment of the EEC and industrial influence on the respective decisions by the Federal Government. The main focus is on the trade relations with Western European countries outside the EEC. Previous historiography has stressed the overriding German economic interest in and corresponding industrial pressures for avoiding trade discrimination by the EEC vis-a-vis the other European members of the OEEC/OECD. It has however failed to address the problem that, despite an alleged political consensus in line with these economic interests. Chancellor Adenauer was able to deliver a policy precluding the Europe-wide solution demanded by parliament, German business, and Ludwig Erhard, the Minister of Economics. It seems to suggest that this policy outcome was mainly a function of Adenauer's personal authority and his constitutional prerogatives as Chancellor. In order to address this central problem, the thesis examines industrial interests at the sectoral level. These are analysed on the basis of a quantitative study of sectoral foreign trade in manufactured products with the countries of EEC and EFTA respectively in the 1950s and 1960s. From other sources it examines the influence which German industry exerted on government policy towards European economic integration. This reveals that industrial interest at the sectoral level in fact gave rise to lobbying pressures for the policy outcome sought by Adenauer, to prevent the large Europe-wide free trade area and to prevent British accession to the EEC. The quantitative analysis shows that for those sectors in favour of the proposed free trade area and British accession the opportunity costs of the failure of these two projects were practically invisible. For sectors in decline and in structural difficulties, on the other hand, both these projects constituted a major threat. The EEC of the Six, however, offered them not only protection against competition from outside, but at the same time considerable export opportunities, particularly in the French and Italian markets. The intra-governmental power struggle over these issues is analysed first with regard to industrial pressure and second to the international framework and the respective constraints and opportunities it provided for domestic policy makers in West Germany. The eventual policy outcome is explained in three dimensions: first in terms of the particular structure of industrial interest and respective pressures; second an alliance between protectionist interests and the specific political agenda of the head of the executive; third in terms of opportunities for the Federal Chancellor arising from the interplay of policy and power at the international level. It is argued that this is a more convincing interpretation and more securely based on the historical evidence.
Style APA, Harvard, Vancouver, ISO itp.
8

Arancibia, Fischer Sebastían Ramón. "Análisis de índices de accidentabilidad en la construcción de proyectos EPCM para la minería: recomendaciones". Tesis, Universidad de Chile, 2012. http://www.repositorio.uchile.cl/handle/2250/112315.

Pełny tekst źródła
Streszczenie:
Ingeniero Civil
Este trabajo realiza un análisis de los índices de accidentabilidad presentados por contratistas de construcción, durante la ejecución de proyectos EPCM para la minería, a lo largo de un periodo de estudio de cinco años. Para contextualizar este análisis, se describe primero el proceso conducido por el contratista general a lo largo de un proyecto de este tipo y la influencia que tiene sobre el desempeño en seguridad durante su construcción. Así mismo, se presentan normativas aplicables, tanto nacional como internacionalmente, para definir los índices de accidentabilidad a utilizar en el estudio y sus relaciones. El análisis de los índices de accidentabilidad se realiza a través de la búsqueda de relaciones de dependencia con algunas características propias de los proyectos estudiados. Estas características incluyen ubicación geográfica, tanto por región como por país, el tipo de obras, la magnitud del proyecto en base a la cantidad de horas hombre empleadas y la condición de uso del terreno. Los resultados indican que el desempeño en seguridad durante la construcción de proyectos EPCM depende mayoritariamente de la ubicación geográfica de éstos. Esto, debido a las importantes diferencias observadas entre las cifras alcanzadas en distintas regiones y países, mostrando un desempeño bastante deficiente en lugares con alto desarrollo económico, en contraste al buen resultado en naciones en vías de desarrollo. Las cifras también evidencian que los índices disminuyen durante períodos de menor actividad económica y mayor desempleo, por el contrario la gran demanda de trabajadores es una de las causas más probables de los bajos desempeños en períodos de abundancia de proyectos. Finalmente se incluyen algunas recomendaciones, para mejorar el desempeño general en materia de seguridad y su diagnóstico, a través del diseño enfocado a la seguridad en construcción y en operación, la utilización de índices de desempeño positivo y otras.
Style APA, Harvard, Vancouver, ISO itp.
9

Bosserman, Carolyn Whitney. "An evaluation of the applicability of the EPA Organic Leachate Model to leaching of solvent and non-solvent wastes". Thesis, Virginia Tech, 1989. http://hdl.handle.net/10919/45970.

Pełny tekst źródła
Streszczenie:
The author evaluated the applicability of the Environmental Protection Agency's Organic Leachate Model to wastes containing organic solvents and other organic compounds ("non-solvents"), and determined that the model tends to overestimate the leaching of organic solvents and other organic compounds. Furthermore, when evaluated for its ability to predict leaching of organic compounds, the model was found to predict the leaching of organic solvent compounds with some accuracy, with a correlation coefficient (R2) of 0.671 for this subset of the data. The model's ability to predict the leaching of non-solvent organic compounds, however, was found to be poor, yielding an R2 of 0.388 for this subset of the data. The author also investigated the effect that organic solvents have on the leaching of other organic compounds in a waste and found that the presence of solvents increases the potential for leaching among the non-solvent compounds. This conclusion was drawn when the average "leachability ratio", or the ratio of leachate concentration to waste concentration for non-solvent compounds in solvent-bearing waste was found to be nearly four times the average leachability ratio for non-solvent compounds in wastes that did not contain organic solvents. Finally, the author modified the Organic Leachate Model to account for the unique properties of organic solvents in an effort to improve the model's accuracy in predicting the leaching of solvents and other compounds in solvent-bearing wastes. The results of this modelling effort produced an improvement in the predictive ability of the model for both solvents and non·solvents, yielding correlation coefficients (R2) of 0.678 for the subset of data represented by organic solvents, and 0.431 for non-solvents) but the improvement was still not sufficient to justify applying the model to non-solvent compounds.
Master of Science
Style APA, Harvard, Vancouver, ISO itp.
10

Abreu, Carlos Alexandre Camargo de. "Inter-relações das dimensões econômica e ambiental do modelo ECP-Triplo na indústria de óleo". Florianópolis, SC, 2003. http://repositorio.ufsc.br/xmlui/handle/123456789/85065.

Pełny tekst źródła
Streszczenie:
Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia de Produção.
Made available in DSpace on 2012-10-20T15:02:26Z (GMT). No. of bitstreams: 1 197194.pdf: 2079833 bytes, checksum: 70442010ef6fe6737522308c8b8487eb (MD5)
O presente trabalho consiste no estabelecimento de inter-relações entre variáveis distintas, compostas por ações estratégicas e indicadores de desempenhos, que compõem as áreas econômicas e ambientais das empresas. A pesquisa utilizou como base os indicadores das dimensões econômica e ambiental do modelo Estrutura - Conduta - performance Triplo (ECP - Triplo), os quais tem como objetivo refletir as estratégias das companhias sob pressão de um determinado mercado, e seu conseqüente desempenho, dando um mesmo peso para os resultados econômicos e ambientais. Identificou-se uma série de posturas estratégicas e indicadores refletindo os desempenhos econômicos e ambientais, no conjunto de empresas pesquisadas, realizando um posterior cruzamento entre os dados ambientais e econômicos, ligando as condutas de dimensões contrárias, performances de esferas distintas e as relações cruzadas entre as condutas de um lado com indicadores de desempenho do outro. Os dados dos cruzamentos foram relacionados de duas formas, onde a primeira coloca como as ações estratégicas gerais, agrupadas por suas funções empresariais, ambientais e econômicas, e cada ação individualmente, estão se relacionando com a esfera contrária do modelo. Para tal, utilizou-se alguns índices que procuram refletir o grau de relação, classificados em abaixo, médio baixo, médio alto e alto. O segundo formato dos resultados, utiliza-se de gráficos, onde é correlacionado para cada empresa, os lados econômicos e ambientais, individual refletido permitindo ter uma noção do comportamento da indústria. As 9 empresas analisadas pertencem ao grupo das 30 maiores companhias de óleo & gás do mundo, mercado o qual a análise de sua estrutura também fez parte desta pesquisa.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "EPC INDUSTRY"

1

Huse, Joseph A. Understanding and negotiating turnkey and EPC contracts. Wyd. 3. London: Sweet & Maxwell, 2010.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

EDC, Furniture, red. EDC furniture industry survey. London: National Economic Development Office, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Devine, Patrick. Insurance intermediaries in the EEC: An industry report. London: Lloyd's of London P., 1992.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

United States. Environmental Protection Agency., red. EPA, Profile Of The Textile Industry, September 1997. [S.l: s.n., 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Commission, Environmental Industries, red. The EIC guide to the UK environmental industry. South Croydon: Faversham House Group on behalf of the Environmental Industries Commission, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

International Conference on Biomass for Energy and Industry (4th 1987 Orléans, France). Biomass for energy and industry: 4th E.C. Conference. London: Elsevier Applied Science, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

G, Buttoud, red. Forest industry in the EEC during the eighties. Brussels: FAST Programme, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

United States. Environmental Protection Agency. Office of Compliance., red. EPA Office of Compliance Sector Notebook Project. Washington, DC (401 M St., SW, Washington 20460): Office of Compliance, Office of Enforcement and Compliance Assurance, U.S. Environmental Protection Agency, 1995.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

United States. Environmental Protection Agency. Office of Compliance., red. EPA Office of Compliance Sector Notebook Project. Washington, DC: Office of Compliance, Office of Enforcement and Compliance Assurance, U.S. Environmental Protection Agency, 1995.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

United States. Environmental Protection Agency. Office of Compliance, red. EPA Office of Compliance Sector Notebook Project. Washington, DC: Office of Compliance, Office of Enforcement and Compliance Assurance, U.S. Environmental Protection Agency, 1995.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "EPC INDUSTRY"

1

Ishii, Nobuaki, Yuichi Takano i Masaaki Muraki. "A Design Method of the Joint Venture Formation in EPC Projects". W Intelligent Engineering and Management for Industry 4.0, 137–46. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94683-8_13.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Müller, Jürgen, Ralph Tröger, Alexander Zeier i Rainer Alt. "Gain in Transparency versus Investment in the EPC Network – Analysis and Results of a Discrete Event Simulation Based on a Case Study in the Fashion Industry". W Service-Oriented Computing – ICSOC 2007, 145–55. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-16132-2_14.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Cowen, Tim. "EEC Law and the Information Technology Industry". W Information Technology & The Law, 253–81. London: Palgrave Macmillan UK, 1990. http://dx.doi.org/10.1007/978-1-349-11768-0_13.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Runkel, Marcus, Andreas Wirtz, Joerg Hammerschmidt i Kent Pope. "Fluidized Bed Applications for the Minerals Industry and Renewable Energy". W EPD Congress 2014, 13–20. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118889664.ch2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Rojo, A., NJ Ramirez i JE Salgado. "Characterization of Plastic Materials Used in the Automotive Industry (Impact-Stress)". W EPD Congress 2011, 327–34. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495285.ch40.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Ribeiro, M. M., S. N. Monteiro i C. M. F. Vieira. "Clayey Ceramic Incorporated with Powder from the Sintering Plant of a Steel-Making Industry". W EPD Congress 2011, 1061–68. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495285.ch118.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Shanmugam, Kirubanandan, Deepak Kumar Verma, Mamta Thakur, Ramandeep Kaur, Kawaljit Singh Sandhu i Maninder Kaur. "Silver-Based Solvent Extraction of EPA/DHA from Fish Oil: Chemistry and Process Development". W Biotechnical Processing in the Food Industry, 161–204. Includes bibliographical references and index.: Apple Academic Press, 2020. http://dx.doi.org/10.1201/9781003057543-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Prakash, G., i M. Kiruthigga. "A Theoretical Framework on Enhancing Cloud Storage Security through Customized ECC Key Management Technique". W Cyber Security Applications for Industry 4.0, 209–31. Boca Raton: Chapman and Hall/CRC, 2022. http://dx.doi.org/10.1201/9781003203087-10.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Hogan, James. "Directory of EC Industry Contacts". W Macmillan Directory of EC Industry Information Sources, 1–96. London: Palgrave Macmillan UK, 1992. http://dx.doi.org/10.1007/978-1-349-12874-7_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Martínez, V. E., M. J. Sáenz, J. R. Gutierrez, J. C. Jimeno i E. Perezagua. "A Flexible Measurement System for R&D in Industry". W Tenth E.C. Photovoltaic Solar Energy Conference, 689–91. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3622-8_177.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "EPC INDUSTRY"

1

Bottari, A., G. Ioudioux, M. Mancini i A. Travaglini. "Guidelines for Building Information Modeling (BIM) performance improvement in the EPC industry". W 2016 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM). IEEE, 2016. http://dx.doi.org/10.1109/ieem.2016.7798060.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Liao, Wentao, Xueyan Zhang i Yubeng Zeng. "Design of Electronic Products Manufacturing Industry Transparent Supply Chain Based on EPC". W International Conference of Logistics Engineering and Management (ICLEM) 2010. Reston, VA: American Society of Civil Engineers, 2010. http://dx.doi.org/10.1061/41139(387)663.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Anderson, Richard, Shawn McGaw i Giovanni Parra. "An Analysis of a Decade of Electrical Safety Incidents in the Global EPC Industry". W 2019 IEEE Petroleum and Chemical Industry Committee Conference (PCIC). IEEE, 2019. http://dx.doi.org/10.1109/pcic30934.2019.9074527.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Rad, Mahdi Behrang, Mohsen Parsa Moghadam i Mohamad Kazem Sheikh-El-Eslami. "Long term market power mitigation using strategic conservation programs in restructured electricity industry". W Energy Conference (EPEC). IEEE, 2008. http://dx.doi.org/10.1109/epc.2008.4763339.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Walter, Hartmut, Joachim Denk i B. U. Koehler. "Specification and judging of high speed rotating machinery with AMB - A practical guideline for OEMS, EPC and end users". W 2012 IEEE Petroleum and Chemical Industry Technical Conference (PCIC). IEEE, 2012. http://dx.doi.org/10.1109/pcicon.2012.6549643.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

"A new multi-objective multi-mode model for optimizing EPC projects in oil and gas industry". W International Conference Image Processing, Computers and Industrial Engineering. International Institute of Engineers, 2014. http://dx.doi.org/10.15242/iie.e0114550.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Smith, Clayton T., John H. Hammeran i Carl Lockwood. "Module Fabrication Strategy for Today’s Nuclear Industry". W 2012 20th International Conference on Nuclear Engineering and the ASME 2012 Power Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/icone20-power2012-54818.

Pełny tekst źródła
Streszczenie:
First generation nuclear power plants were built onsite with large construction forces over a number of years using a design that was being revised during construction. Vendor supplied equipment skids were the closest thing to modular building techniques at that time. Modularization techniques are available today as a tool for performing parallel construction activities such as fabrication and assembly of components offsite to support the construction cost and schedule goals of a project. Accordingly, extensive planning and coordination is required by engineering, procurement, fabricators, and construction to support modularization. The importance of developing a strategy for the utilization of modularization to the Nuclear Industry, Owners, and Engineering Procurement and Construction (EPC) entities, cannot be over emphasized, ensuring the development of a Corporate Modularization Fabrication Strategy, which incorporates and addresses the following, various elements: • Project Modularization Plan • Definitions and terms for module, modularization, and on-off-site fabrication • Module types • Modularization boundaries • Work processes for interface between Engineering, Procurement, Fabricator, and Quality to allow good communication between entities • Constructability reviews • Modularization schedule linked to integrated project schedule • Compliance with approved procedures and Quality Program requirements • Commitment from management This paper and presentation will discuss and highlight the following for a typical Advanced Boiling Water Reactor (ABWR) application: • Typical Corporate Modularization Fabrication Strategy; • Typical Modularization Concepts; • Modularization: Friend or Foe.
Style APA, Harvard, Vancouver, ISO itp.
8

Bidua, Abhishek Kumar. "Use of FIDIC 2017 as Standard Form of Contract for EPC Projects in Oil and Gas Industry". W Abu Dhabi International Petroleum Exhibition & Conference. Society of Petroleum Engineers, 2018. http://dx.doi.org/10.2118/193243-ms.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Bowo, Ludfi Pratiwi, Ramdhani Eka Prilana i Masao Furusho. "A Hybrid Methodology for Maritime Accident Analysis: The Case of Ship Collision". W ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/omae2019-96663.

Pełny tekst źródła
Streszczenie:
Abstract Human error is recognized as the most common factor that causes maritime accidents. Human Error Assessment and Reduction Technique (HEART) as a Human Reliability Assessment (HRA) has been widely applied in various industries. However, in the maritime industry, machine, media, and management are also considered as factors that can strongly affect human behavior, judgment, and other human elements. These factors are particularly relevant for bridge resource management that perform the task of maintaining a proper look-out. Therefore, this study considers the effect of those factors integrated with 4M (man, machine, media, management) factors. The study was conducted with 37 collisions accident reports from 2007–2017, using data from the NTSB and TSB-Canada. There are 229 Error Producing Condition (EPC) found in this study. The classification of the EPC to the 4M conducted in this study.
Style APA, Harvard, Vancouver, ISO itp.
10

Narula, Ram G., Martin Massy i Jyoti Singh. "Design Considerations for Combined Cycle Plants for the Deregulated Market: An EPC Contractor’s Perspective". W ASME Turbo Expo 2002: Power for Land, Sea, and Air. ASMEDC, 2002. http://dx.doi.org/10.1115/gt2002-30252.

Pełny tekst źródła
Streszczenie:
Deregulation of the power industry in Europe and the attendant pressures to innovate have led to new approaches to financing and construction of power plants. This paper discusses the salient design, procurement, and project execution considerations of a combined cycle (CC) plant for a deregulated market.
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "EPC INDUSTRY"

1

Veil, J. A. EPA compromises consistency in its coastal oil and gas industry cost-effectiveness analysis. Office of Scientific and Technical Information (OSTI), sierpień 1997. http://dx.doi.org/10.2172/510302.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Fernández Gómez, Jorge, i Jaime Menéndez Sánchez. Euskal Autonomia Erkidegoko hidrogeno sistemaren garapena epe ertainera. Redaktor Patricia Canto. Universidad de Deusto, 2023. http://dx.doi.org/10.18543/hhcr1526.

Pełny tekst źródła
Streszczenie:
Txosten honek Euskal Autonomia Erkidegoan hidrogenoa garraiatzeko azpiegituren sistemak epe ertainean izan dezakeen bilakaera du aztergai. Zehazki, lanak hiru helburu ditu: (1) epe ertainera (10-15 urteko epean) azpiegiturak garatzeko jokalekuen ezaugarriak definitzea; (2) EAEko hidrogeno sistemaren garapenean eragina duten funtsezko faktoreak identifikatzea eta epe ertaineko jokalekuak zehazteko orduan izan dezaketen eragina aztertzea; (3) Euskal Autonomia Erkidegorako ondorio estrategikoak ateratzea. Hidrogenoaren ekoizpen eta garraio sistemari dagozkion jokalekuak askotarikoak dira: guztiz deszentralizatutako egoera batetik hasi (tokiko ekoizpen azpiegiturak dituena, kontsumo instalazioetan edo industria hubetan) eta gaur egungo gas saretik abiatuta, guztiz zentralizatutako sistema batera arte joan daitezke. Txostenaren ondorio nagusia da Euskal Autonomia Erkidegoaren ikuspuntutik epe laburrerako estrategia onena dela industria hubetan (Bilboko Portuaren inguruan) hidrogenoa azkar hedatzen laguntzea eta gainerako erabakiak hartzeko pixka bat itxarotea, sektorea datozen urteetan nola garatzen den ikusteko eta, horren arabera, epe luzeagoko azpiegiturak osatzen hasteko.
Style APA, Harvard, Vancouver, ISO itp.
3

Fthenakis, V. M. The OSHA and EPA programs on preventing chemical accidents and potential applications in the photovoltaic industry. Office of Scientific and Technical Information (OSTI), sierpień 1996. http://dx.doi.org/10.2172/380370.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Crocker, Raju i Yang. L51796 Document CEM Experience in Natural Gas Transmission Industry. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), marzec 1999. http://dx.doi.org/10.55274/r0010426.

Pełny tekst źródła
Streszczenie:
Since passage of the 1990 Clean Air Act Amendments (CAAA), continuous emission monitoring system (CEMS) vendors, manufacturers, research organizations, parametric emissions monitoring system (PEMS) vendors, consultants, and source owner/operators have been developing strategies to satisfy compliance monitoring requirements that may eventually apply to many gas turbines and engines. A variety of CEMS and PEMS approaches have been developed, and evaluated to determine overall performance and cost. In addition, a few natural gas transmission companies have been required to install and operate CEMS on specific engines and turbines in order to comply with existing State permitting requirements or emissions trading programs.Within the next five years, the Environmental Protection Agency (EPA) is expected to promulgate a series of stationary source, air emission regulations that will have a significant impact on many industrial sources. In addition, EPA will be issuing regulatory revisions, policy manuals and guidance documents to further clarify the implementation and enforcement of rules recently promulgated - e.g., Title V Permitting, Compliance Assurance Monitoring (CAM) and Credible Evidence rules. As a part of each of these anticipated rules, revisions, and supporting documents, EPA will require and continue to refine corresponding compliance monitoring procedures and performance specifications. For the natural gas transmission industry, the anticipated regulatory changes could result in substantial increases in the cost of environmental compliance. Costs associated with pollution control (including reductions in engine/turbine efficiency), compliance monitoring, emissions reporting and recordkeeping may all increase as a result of pending regulatory requirements. This report has been prepared to document the natural gas transmission industry's experience operating continuous emission monitoring systems (CEMS) on reciprocating engines and stationary gas turbines and to discuss some of the more critical, technical issues that will have to be addressed if pending regulatory changes require the use of CEMS. In particular, this report provides technical discussions regarding the performance, operation, maintenance and costs of a CEMS program for compliance monitoring of nitrogen oxides emissions.
Style APA, Harvard, Vancouver, ISO itp.
5

Choquette, Gary. PR-000-23COMP-R08 Pipe in Casings Comprehensive Compendium. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), sierpień 2023. http://dx.doi.org/10.55274/r0000034.

Pełny tekst źródła
Streszczenie:
PRCI has carried out several research projects related to design, procedures, processes, and methods related to installing and operating pipe installed inside casings. Since not all studies sponsored by other industry groups (e.g., API, EPRG, APIA, etc.) or by individual pipelines companies are not included, this report does not represent a review of the topic in the broader industry-wide sense. Instead, it is designed to provide a guide to past work so that facility operators and researchers to help identify and locate research reports on the topic.
Style APA, Harvard, Vancouver, ISO itp.
6

Choquette, Gary. PR-000-23COMP-R03 Pipeline Risk Management. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), czerwiec 2023. http://dx.doi.org/10.55274/r0000024.

Pełny tekst źródła
Streszczenie:
The PRCI Technical Committees have carried out many research projects related to identifying and managing pipeline safety risks. Since not all studies sponsored by other industry groups (e.g., API, EPRG, APIA, etc.) or by individual pipeline companies are not included, this report does not represent a review of the topic in the broader industry-wide sense. Instead, it is designed to provide a guide to past work so that current PRCI members and its research contractors can identify and locate project reports that might be of use in understanding pipeline risk management.
Style APA, Harvard, Vancouver, ISO itp.
7

Unknown, Author. L51543a Evaluation of Cost-Effective Measures to Comply with Storage Tank Regulations Vol 1. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), grudzień 1987. http://dx.doi.org/10.55274/r0010522.

Pełny tekst źródła
Streszczenie:
Assesses the impact on the natural gas industry of recently proposed EPA rules specifying technical standards and financial responsibility covering buried tanks used to store certain petroleum products or chemicals. Reviews leak detection and monitoring methods, tank piping options, installation practices, and generate response procedures.Vol. I only approved for publication.
Style APA, Harvard, Vancouver, ISO itp.
8

Tucker. L51543b Evaluation of Cost-Effective Measures to Comply with Storage Tank Regulations Vol 2. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), grudzień 1987. http://dx.doi.org/10.55274/r0010349.

Pełny tekst źródła
Streszczenie:
Assesses the impact on the natural gas industry of recently proposed EPA rules specifying technical standards and financial responsibility covering buried tanks used to store certain petroleum products or chemicals. Reviews leak detection and monitoring methods, tank piping options, installation practices, and generate response procedures.Vol. I only approved for publication.
Style APA, Harvard, Vancouver, ISO itp.
9

Marlow, Thomas. PR-000-18COMP-R03 Damage Prevention Compendium. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), styczeń 2019. http://dx.doi.org/10.55274/r0011548.

Pełny tekst źródła
Streszczenie:
The PRCI Technical Committees have carried many research projects related to the subject of Damage Prevention. This report; therefore, presents a summary of past PRCI-funded studies in the area of Damage Prevention. Since studies sponsored by other industry groups (e.g., INGAA, EPRG, APIA, CEPA, etc.) or by individual pipeline companies are not included, this report does not represent a review of the topic in the broader industry-wide sense. Instead, it is designed to provide a guide to past work so that current TC members can identify and locate project reports that might be of use in addressing their current day-to-day damage prevention issues.
Style APA, Harvard, Vancouver, ISO itp.
10

Choquette, Gary. PR-000-21COMP-R09 Weld Seam Corrosion Compendium. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), wrzesień 2021. http://dx.doi.org/10.55274/r0012150.

Pełny tekst źródła
Streszczenie:
The PRCI Technical Committees have carried multiple research projects related to the subject of weld seam corrosion. This report, therefore, presents a summary of past PRCI funded studies in the area of weld seam corrosion. Since not all studies sponsored by other industry groups (e.g., INGAA, EPRG, APIA, CEPA, etc.) or by individual pipeline companies are not included, this report does not represent a review of the topic in the broader industry-wide sense. Instead, it is designed to provide a guide to past work so that current TC members can identify and locate project reports that might be of use in addressing weld seam corrosion issues.
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „EPC INDUSTRY” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii