Rozprawy doktorskie na temat „Energy techniques”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Energy techniques”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Cave-Ayland, Christopher. "Quantum free energy techniques". Thesis, University of Southampton, 2014. https://eprints.soton.ac.uk/375028/.
Pełny tekst źródłaValsomatzis, Emmanouil. "Aggregation techniques for energy flexibility". Doctoral thesis, Universitat Politècnica de Catalunya, 2017. http://hdl.handle.net/10803/461884.
Pełny tekst źródłaGennem de senere år er prisen faldet på energi fra vedvarende energikilder såsom sollys og vind, hvilket har medført et stigende forbrug af vedvarende energi. Dette har resulteret i, at energi, der produceret af vedvarende energi, sendes ud i elnettet og andelen forventes at stige markant i fremtiden. Vedvarende energi er imidlertid karakteriseret af effektsvingninger, og integrationen i elnettet kan føre til kvalitetsproblemer med strømmen som for eksempel uligevægt. Samtidig bliver enheder, der sluger vedvarende energi såsom varmepumper og elektriske køretøjer, mere og mere populære. Dette resulterer i, at efterspørgslen på energi, især i spidsbelastede situationer, kan medføre overbelastning og trængsel på elnettet. For at konfrontere de nye udfordringer bliver elnettet ændret til et såkaldt Smart Grid. Konceptet om udbud og efterspørgsel Demand Response (DR) spiller her en meget stor rolle. Ifølge DR, imødegår Smart Grid bedre udbud og efterspørgsel af energi ved at bruge fleksibel energi. Fleksibel energi eksisterer i mange individuelle producenter og/eller forbrugere. For eksempel tilslutter en ejer af et elektrisk køretøj sit køretøj i mere tid end det rent faktisk er nødvendigt. På denne måde kan tidspunktet for opladningen ændres rettidigt. Belastningen, der kræves for opladning, kunne flyttes til perioder, hvor produktion fra vindmøller er høj eller væk fra de spidsbelastede tidspunkter. Således øges vedvarende energi’ andel og/eller elnettets drift er forbedret. Dette Ph.D. projekt er sponsoreret af det danske TotalFlex projekt (http://totalflex.dk). TotalFlex’ formål er at designe og etablere et fleksibelt elmarkedsystem, hvor fleksibilitet fra individuelle producent og/ eller forbruger f.eks. husholdningsenheder kan blive udvekslet mellem forskellige markedsaktører såsom balanceansvarlige parter og eldistributionsnettets operatører. For at opnå dette, udnytter TotalFlex flex-offer konceptet. Baseret på konceptet om flex-offer, bliver fleksibilitet fra individuelle prosumers fanget og repræsenteret i en generisk model. Fleksible belastninger fra de individuelle prosumers fanger imidlertid kun meget små energimængder og kan ikke udveksles direkte på markedet. Derfor bliver aggregering essentielt. Ph.D. projektet fokuserer på at udvikle aggregering-steknikker for energifleksibilitet, der kan give individuelle prosumers mulighed for at deltage i et sådant fleksibilitetsmarked. Først vil afhandligen introducere adskillige fleksibilitetsmålinger for at kvantificere fleksibiliteten, der fanges af flex-offer modellen og sammenligne flex-offer med hinanden både på et individuelt og et aggregeret niveau. Input og output af aggregeringsteknikker er fleksibilitet. Aggregeringsteknikker samler energifleksibilitet for at opnå dets mål og forsøger på samme tid at beholde så meget fleksibilitet som muligt til at blive udvekslet på markedet. Herpå forsøger afhandligen for det andet at beskrive basis flexoffer aggregeringsteknikker og præsenterer balance-aggregeringsteknikker, der fokuserer på at afbalancere energiudbud og -efterspørgsel. Siden der er situationer, hvor overbelastninger af elnettet forekommer, præsenterer afhandlingen for det tredje, to begrænsningsbaserede aggregeringsteknikker. Teknikkerne samler effektivt store mængder af flex-offers og tager samtidig hensyn til fysiske begrænsninger i elnettet. De producerede, samlede flexoffers er stadig fleksible og efter det er planlagt, opnås et normaltfungerende net. Til slut vil afhandlingen undersøge de økonomiske fordele ved aggregeringsteknikkerne. Den introducerer flex-offer aggregeringsteknikkerne, der tager højde for de reelle, tekniske krav, der er på markedet. Resultatet kan være, at individuelle små fleksible belastninger indirekte kan udveksles på energimarkedet gennem aggregering. De foreslåede aggregeringsteknikker til energi-fleksibilitet kan bidrage til brug af fleksibilitet i Smart Grid i både nuværende og fremtidige markedsrammer. De designede teknikker kan forbedre de tilbudte ydelser til prosumers og undgå de meget dyre opgraderinger af distributionsnetværk
Durante los últimos años, la bajada en el precio de la energía procedente de fuentes renovables, tales como luz solar y eólica, ha resultado en un aumento del uso de este tipo de recursos de Energía Renovables (ER). Como consecuencia de este aumento, la energía producida a través de ER es inyectada en la red eléctrica y se espera que la proporción de energía suministrada a la red crezca significativamente en los próximos años. Sin embargo, las ER se caracterizan por ser muy fluctuantes y su integración en la red eléctrica podría acarrear problemas de calidad, como por ejemplo desequilibrios energéticos. Al mismo tiempo, nuevos dispositivos de alto consumo de energía, como bombas de calor y vehículos eléctricos, son cada vez mas populares y la alta demanda de estos, especialmente en horas puntas, puede crear sobrecargas y congestiones en la red. Para afrontar estos restos, la red eléctrica se transforma en la llamada Red Inteligente, dónde el concepto de respuesta a la demanda juega un papel. Esta thesis de doctorado está patrocinada por el proyecto danés TotalFlex (http://totalflex.dk). El objetivo principal de este proyecto es diseñar y establecer el marco de flexibilidad de mercado, dónde la flexibilidad de productores/consumidores, por ejemplo los dispositivos del hogar, pueda ser comercializada entre los diferentes actores del mercado como las comercializadoras de electricidad y los operadores de sistemas de distribución. Para lograr este propósito, el proyecto TotalFlex utiliza el concepto flex-offer flexibilidad en la oferta. Basado en el concepto flex-offer, la flexibilidad de consumidores y productores individuales es capturada y representada a través de un modelo genérico. Sin embargo, las cargas flexibles de estos individuos producen pequeñas cantidades de energía y, por lo tanto, no pueden ser directamente negociadas en el mercado. Esto significa que la agregación de esta energía es esencial. Este Ph.D está enfocado desarrollo de técnicas de agrega para que permitirán a productores y consumidores individuales participar en dicha. En primer lugar, esta tesis introduce medidas de flexibilidad con la finalidad de cuantificar la flexibilidad calculada por el modelo flex-offer y comparar las diferentes ofertas entre ellas, tanto a nivel individual como agregado. Flexibilidad es tanto la entrada como la salida de las técnicas de agregado, las cuáles agregan flexibilidad energética para lograr sus objetivos y, al mismo tiempo, retener la máxima flexibilidad para comerciarla en el mercado. En segundo lugar, la tesis describe la base de las tecnicas de agregado flex-offer y presenta técnicas de que se enfocan en un balance entre la oferta y la demanda energética. Tercero, dado que existen casos dónde se producen congestiones en la red eléctrica, la tesis presenta tecnicas de agregado basadas en restricciones. Dichas técnicas agregan grandes cantidades de flex-offers considerando restricciones físicas de la red eléctrica. Las flexoffers agregadas que se producen son aún flexibles y, cuando se programan, se logra una operación normal de red. Por último, en la tesis se examina los beneficios económicos de las técnicas agregadas, introduciendo técnicas de agregado flex-offer que tienen en cuenta los requisitos técnicos del mercado real. Como resultado, las pequeñas cargas individuales y flexibles pueden ser indirectamente negociadas en el mercado energético a través de la agregación. Las técnicas de agregado propuestas para favorecer la flexibildad energética puede contribuir al uso de flexibilidad en la red inteligente tanto en el presente como en el futuro. Mejorar los servicios ofrecidos a consumidores y productores así como evitar las costosas actualizaciones de la red de distribución.
Surucu, Oktay. "Decomposition Techniques In Energy Risk Management". Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12606552/index.pdf.
Pełny tekst źródłaMei, Xinxin. "Energy conservation techniques for GPU computing". HKBU Institutional Repository, 2016. https://repository.hkbu.edu.hk/etd_oa/298.
Pełny tekst źródłaMiliotis, Vasileios. "Energy efficient offloading techniques for heterogeneous networks". Doctoral thesis, Universitat Politècnica de Catalunya, 2016. http://hdl.handle.net/10803/457139.
Pełny tekst źródłaLa derivación del tráfico de datos móviles (en inglés data offloading) ha sido propuesta como una solución al problema de la congestión de la red, un problema que empeora continuamente debido al incremento de la demanda de datos móviles. El concepto de offloading se entiende como la explotación de la heterogeneidad de la red con el objetivo de mitigar la carga de la infraestructura de las redes celulares. En esta tesis se presenta un protocolo multicast para redes de corto alcance (short range networks) que explota las características de la codificación de red en la capa física (physical layer network coding). En el protocolo propuesto, llamado CooPMC, se implementa una solución cooperativa que permite la resolución de colisiones mediante la utilización de un esquema indirecto de cooperación entre redes. Gracias a este esquema, se consigue un protocolo multicast fiable i con poco overhead de control para redes de corto alcance parcialmente solapadas. Se demuestra que el protocolo CooPNC consigue una mayor tasa de transmisión neta (throughput) y una mejor eficiencia energética, a la vez que el retardo se mantiene por debajo del obtenido con los protocolos multicast del estado del arte. La tesis ofrece una descripción detallada del protocolo propuesto, tanto para un escenario simple de redes solapadas como también para un escenario general escalable. Se demuestra mediante análisis matemático y simulaciones que CooPNC ofrece mejoras significativas en comparación con los protocolos multicast para redes de corto alcance del estado del arte. Con el objetivo de encontrar los límites de la codificación de red en la capa física (physical layer network coding), se estudia el llamado Cross Network bajo distintas técnicas de Network Coding (NC). Se proporciona el impacto de la equidad (fairness) de la capa de control de acceso al medio (Medium Access Control, MAC), para los casos de repetidor puro (pure relaying), NC digital con y sin escucha del medio, y NC en la capa física con y sin escucha del medio. En la segunda parte de la tesis se investiga el offloading en el enlace ascendente mediante IP Flow Mobility (IFOM). El IFOM permite a los usuarios móviles de LTE mantener dos flujos de datos concurrentes, uno a través de LTE y el otro a través de la tecnología de acceso WiFi, que presenta limitaciones en el enlace ascendente debido a la equidad (fairness) inherente del diseño de IEEE 802.11 DCF. Para superar estas limitaciones, se propone un algoritmo proporcional ponderado de asignación de banda para el volumen de datos derivado a través de WiFi, junto con un algoritmo de asignación de tasa de transmisión basado en pricing para el volumen de datos del enlace ascendente de LTE. Con la solución propuesta, se mejora la eficiencia energética de los usuarios móviles, y se incrementa el volumen de datos que se pueden derivar gracias a la utilización concurrente de tecnologías de acceso que permite IFOM. En el algoritmo proporcional ponderado de asignación de banda de WiFi, se toman en consideración tanto las distintas necesidades de los usuarios en el enlace ascendente como su eficiencia espectral en LTE, y se propone un mecanismo de acceso que mejora el uso de WiFi para el tráfico derivado en el enlace ascendente. En cuanto a la parte de LTE, se propone un algoritmo en dos etapas de asignación de tasa de transmisión basada en pricing (con propuestas de pricing exponencial y lineal) con el objetivo de satisfacer el enlace ascendente de los usuarios en LTE. También se contempla la existencia de usuarios maliciosos, que pretenden utilizar el ancho de banda WiFi contra sus iguales para transmitir menos datos a través del enlace ascendente de LTE (menos eficiente energéticamente). Para ello se propone un método basado en la reputación que combate el funcionamiento egoísta (selfish).
Sze, Ngok Man. "Switching converter techniques for energy harvesting applications /". View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?ECED%202007%20SZE.
Pełny tekst źródłaMa, Yingnan. "Intelligent energy management system : techniques and methods". Thesis, City University London, 2011. http://openaccess.city.ac.uk/1212/.
Pełny tekst źródłaSchmitz, Marcus Thomas. "Energy minimisation techniques for distributed embedded systems". Thesis, University of Southampton, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.274048.
Pełny tekst źródłaLi, Yang. "Simple techniques for piezoelectric energy harvesting optimization". Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0077/document.
Pełny tekst źródłaPiezoelectric energy harvesting is a promising technique for battery-less miniature electronic devices. The object of this work is to evaluate simple and robust approaches to optimize the extracted power. First, a lightweight equivalent circuit derived from the Mason equivalent circuit is proposed. It’s a comprehensive circuit, which is suitable for piezoelectric seismic energy harvester investigation and power optimization. The optimal charge impedance for both the resistive load and complex load are given and analyzed. When complex load type can be implemented, the power output is constant at any excitation frequency with constant acceleration excitation. This power output is exactly the maximum power that can be extracted with matched resistive load without losses. However, this wide bandwidth optimization is not practical due to the high sensitivity the reactive component mismatch. Another approach to improve power extraction is the capability to implement a network of piezoelectric generators harvesting on various frequency nodes and different locations on a host structure. Simulations are conducted in the case of direct harvesting on a planar structure excited by a force pulse. These distributed harvesters, equipped with nonlinear technique SSHI (Synchronized Switching Harvesting on Inductor) devices, were connected in parallel, series, independently and other complex forms. The comparison results showed that the energy output didn’t depend on the storage capacitor connection method. However, only one set of SSHI circuit for a whole distributed harvesters system degrades the energy scavenging capability due to switching conflict. Finally a novel non-linear approach is proposed to allow optimization of the extracted energy while keeping simplicity and standalone capability. This circuit named S3H for “ Synchronized Serial Switch Harvesting” does not rely on any inductor and is constructed with a simple switch. The power harvested is more than twice the conventional technique one on a wide band of resistive load
Zhang, Guangcheng. "Smart energy harvesting utilizing flow-induced techniques". Thesis, University of Nottingham, 2018. http://eprints.nottingham.ac.uk/55206/.
Pełny tekst źródłaKnauth, Thomas. "Energy Efficient Cloud Computing: Techniques and Tools". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-164391.
Pełny tekst źródłaKumirai, Tichaona. "Energy efficiency interventions for residential buildings in Bloemfontein using passive energy techniques". Thesis, Bloemfontein : Central University of Technology, Free State, 2010. http://hdl.handle.net/11462/124.
Pełny tekst źródłaThe purpose of this research is to minimize the use of active systems in providing thermal comfort in single-family detached, middle to high income residential buildings in Bloemfontein. The typical case study house was selected according to the criteria as reviewed by Mathews et al., (1999). Measurements were taken for seven days (18 – 24 May 2009). The measurements were carried out in the winter period for Bloemfontein, South Africa. Ecolog TH1, humidity and temperature data logger was used in doing the measurements. These measurements included indoor temperatures and indoor relative humidity. Temperature swings of 8.43 ºC and thermal lag of 1 hour were observed. For the period of seven days (168 hours), the house was thermally comfortable for 84 hours. Thermal analysis for the base case house was done using Ecotect™ (building analysis software) and the simulated results were compared with the measured results. A mean bias error (MBE) of between 10.3% ≤≤11.5% was obtained on the initial calibration. The final calibration of the model yielded error between0.364% ≤≤0.365%. The final calibration model which presented a small error was adopted as the base case. Passive strategies were incorporated to the Ecotect™ model (final calibrated model) singly and in combination; then both thermal and space load simulations were obtained and compared to simulations from the original situation (base case) for assessing improvements in terms of thermal comfort and heating, ventilation and air conditioning (HVAC) energy consumption. Annual HVAC electricity savings of up to 55.2 % were obtained from incorporating passive strategies in combination. Incorporating passive strategies resulted in small improvements in thermal comfort.
Dickov, Branimir. "MPI layer techniques to improve network energy efficiency". Doctoral thesis, Universitat Politècnica de Catalunya, 2015. http://hdl.handle.net/10803/334181.
Pełny tekst źródłaEn los últimos años, el consumo de energia en la red de interconexión se esta considerando como uno de los factores que pueden condicionar la carrera hacia los sistemas Exascale. En la red de interconexion, la mayor parte de este consumo de energía se debe a los enlaces de red, cuyo consumo permanece constante independientemente de si los datos se intercambian de forma activa, dado que ambos extremos deben de permanecer activos para poder mantener la sincronización. Esta tesis complementa los esfuerzos de investigación que actualmente se estan llevando a cabo a nivel internacional con el objetivo de reducir la potencia y conseguir una proporcionalidad de consumo de energía con respecto al ancho de banda requerido en las comunicaciones. En esta tesis se contemplan dos direcciones complementarias para conseguir dichos objetivos: por un lado, la posibilidad de usar sólo el ancho de banda necesario durante las fases de comunicación; y por lo tanto usar el modo de bajo consumo durante las fases de computación en las que no se requiere de la red de interconexión. Para abordar la primera de ellas se investiga los posibles beneficios de usar compresión en los datos que se transfieren en los mensajes MPI. Cuando ello es posible, se puede realizar la comunicación con una menor necesidad de ancho de banda de los enlaces sin que necesariamente se produzca una penalizacion en el rendimiento de la aplicación. Varias técnicas de compresión han sido propuestas en la literatura con el objetivo de reducir el tiempo de comunicación y la escalabilidad de las aplicaciones paralelas. Aunque estas técnicas han mostrado un potencial importante en ciertos nucleos computacionales, su adopción en sistemas reales no se ha llevado a cabo. En esta tesis, se muestra como el uso de la compresión de datos en los mensajes MPI puede permitir una reducción en el consumo de energia, reduciendo el número de enlaces activos que son requeridos para realizar la comunicación, en proporción a la reducción de los bytes que deben de ser transferidos. En general, los desarrolladores de aplicaciones consideran el tiempo pasado en la comunicación como un gasto innecesario, y por lo tanto se esfuerzan en mantenerlo al mínimo. Esto lleva a una demanda de un ancho de banda que puede afrontar el pico de alto trafico y de una sensibilidad a la latencía, pero con una utilización mediana baja, lo que ofrece unas oportunidades significativas para el ahorro de energía. Por lo tanto, es posible ahorrar la energía apoyándose en los modos de bajo consumo, pero las latencias de reactivación de los enlaces no deben producir una pérdida en el rendimiento. En esta tesis doctoral se propone un mecanismo que permite predecir con exactitud los periodos de inactividad de los enlaces, lo que permitirá pasarlos al modo más eficiente de energía que disponga la infraestructura de red. La propuesta en esta tesis doctoral actua en tiempo de ejecución y se denomina Sistema de Predicción de Patrones (SPP). SPP permite predecir con exactitud no sólo cuando un enlace llega a ser no usado, sino también cuando se requiere de nuevo su reactivación, permitiendo que los enlaces entren en modo de bajo consumo durante los periodos de inactividad y se vuelven de nuevo activos a tiempo evitando provocar una degradación significativa en el rendimiento. Muchas aplicaciones de HPC (High-Performance Computing) pueden beneficiarse de esta predicción, ya que tienen fases de computación y de comunicación repetitivas. Mediante la implementación de los mecanismos de ahorro de energía dentro de la libreria MPI, los programas MPI existentes no requiren ninguna modificación. En la tesis, tambien desarrollamos una version más avanzada del sistema de predicción que dominamos como el Sistema de Prediccion de Patrones con Ajustes Automáticos (SPPA) que además permite ajustar de forma autónoma uno de los parámetros importantes de SPP que determina el grado de agregación de mensajes en el algoritmo de predicción
Fernández, Fernández Adriana. "Energy-aware routing techniques for software-defined networks". Doctoral thesis, Universitat Politècnica de Catalunya, 2018. http://hdl.handle.net/10803/620620.
Pełny tekst źródłaL'assoliment de l'eficiència energètica s'ha convertit recentment en un tema clau de recerca de xarxes a causa dels creixents nivells de consum d'energia i emissions de CO2 generats per les xarxes de dades. Aquest problema es torna cada vegada més preocupant i desafiant, donat el dràstic augment del trànsit esperat en els propers anys. No obstant això, l'ús d'estratègies energètiques eficients podria invertir aquesta situació, reduint el consum d'electricitat de les xarxes de dades d'Internet i contribuint a mitigar l'impacte ambiental d'altres sectors. L'existència d'elements de xarxa redundants i amb grans capacitats és una pràctica de disseny habitual en les infraestructures de xarxes actuals per afrontar fallades sobtades o fluxos de trànsit més elevats. Tanmateix, aquests recursos addicionals romanen poc o gens utilitzats la major part del temps, generant un desaprofitament d'energia no desitjat. Per tant, posar en mode de repòs (és a dir, un estat de baixa potència) elements no utilitzats és una estratègia efectiva i àmpliament acceptada per disminuir el consum en xarxes de dades. En aquest context, les xarxes definides per programari (SDN) es poden considerar una solució atractiva per aconseguir l'esperada eficiència energètica en els sistemes de comunicacions actuals, ja que permeten una flexible programabilitat idònia per a aquest problema. Aquesta tesi doctoral aborda el problema d'optimitzar el consum d'energia en SDN a través del disseny de tècniques d'encaminament conscients de l'energia que minimitzen la quantitat d'elements de xarxa necessaris per satisfer una càrrega de trànsit entrant. Diferent dels treballs existents, aquesta tesi es centra a optimitzar el consum d'energia en SDN amb el control de tràfic dins de banda per tancar aquesta important bretxa en la literatura i proporcionar solucions compatibles amb xarxes troncals operatives. Complementant l'objectiu general de millorar l'eficiència energètica en SDN, aquesta recerca també pretén cobrir altres importants paràmetres relacionats, com ara el rendiment de la xarxa, els requisits de qualitat de servei (QoS) i el funcionament en temps real. En conseqüència, aquest estudi ofereix una perspectiva general sobre l'ús de tècniques d'encaminament eficients energèticament, que contempla consideracions integrades per al tràfic de dades i del pla de control en SDN. Prenent dades d'entrada realistes, es van aconseguir desconnectar significatives quantitats d'enllaços i nodes, la qual cosa demostra la gran oportunitat d'estalvi d'energia que ofereixen les nostres propostes. Els resultats obtinguts també validen el estret compromís entre les preocupacions ambientals i les qüestions de rendiment de la xarxa, considerant diversos indicadors de rendiment. Aquests resultats confirmen que els esquemes d'encaminament conscients de l'energia s'han de dissenyar tenint en compte els requisits de tràfic específics i els límits desitjats de les mètriques de rendiment. A més, es demostra que, considerant conjuntament els requisits de QoS i de l'energia necessària, és un enfocament eficaç per millorar, no només el consum d'energia, sinó també el rendiment en paràmetres crítics, com la latència del tràfic de control i la probabilitat de bloqueig. De manera semblant, l'assignació dinàmica de tràfic proposta, amb re-encaminament conscient de la congestió, permet gestionar grans volums de trànsit sense degradar el rendiment de les demandes de major prioritat. En general, les nostres propostes són precises, fàcils d'implementar i bastant equilibrades i efectives en els seus resultats, buscant un desplegament adequat i fàcil en escenaris pràctics de SDN. Per tant, la recerca realitzada i les contribucions contingudes en aquest document no només afegeixen el que es coneix sobre el potencial de les tècniques d'encaminament conscients de l'energia, sinó que també representen una valuosa solució en el camí cap a una xarxa sostenible
Tarragona, Roig Joan. "Smart control techniques for thermal energy storage systems". Doctoral thesis, Universitat de Lleida, 2021. http://hdl.handle.net/10803/671420.
Pełny tekst źródłaAumentar el uso de energía procedente de fuentes renovables es importante en la lucha contra el cambio climático. No obstante, su implantación plantea retos importantes debidos a la falta de continuidad en su generación y al desajuste que existe con los perfiles de consumo. La presente tesis doctoral se enmarca en dos propuestas para incrementar el rendimiento de los paneles fotovoltaicos en el ámbito de los sistemas de calefacción para edificios. Por un lado, el sistema integra un tanque de almacenaje de energía térmica, que permite almacenar la energía generada por los paneles durante el día, a fin de poderla consumir a las horas con más demanda. Por otro lado, el sistema también cuenta con una estrategia de control predictivo, que permite pronosticar las condiciones meteorológicas y las demandas de calefacción futuras, para ajustar el funcionamiento de todo el conjunto de elementos, considerando esta información. El sistema propuesto demostró ser efectivo en distintos tipos de climas y viviendas.
To increase the use of energy that comes from renewables is important to fight against climate change. However, their deployment leads to significant challenges due to the intermittence in their generation and the mismatch between energy demand and supply. In that sense, this PhD thesis is framed in two proposals to increase the performance of photovoltaic panels in heating systems integrated in the building sector. On the one hand, the system considers a thermal energy storage tank, which allows to store the energy produced by the panels during the solar hours, in order to consume it along the peak demand periods. On the other hand, the system also takes into account a model predictive control strategy, which enables to forecast weather conditions and future heating demands, to adjust the operation of all the elements. The proposed system demonstrated a good and effective behaviour in different climate conditions and buildings.
Wander, Adrian. "Cluster studies of chemisorption using total energy techniques". Thesis, University of Warwick, 1989. http://wrap.warwick.ac.uk/101952/.
Pełny tekst źródłaWang, Yuchang. "Decision-making techniques for smart grid energy management". Thesis, University of Edinburgh, 2018. http://hdl.handle.net/1842/28970.
Pełny tekst źródłaPeng, Yue. "Energy optimisation of communication techniques between communicating objects". Nantes, 2015. https://archive.bu.univ-nantes.fr/pollux/show/show?id=967c5a89-6e36-4531-be1a-93f98c9b8bf2.
Pełny tekst źródłaTechnological advances have resulted in the development of wireless sensor applications. The densely distributed sensors, generally used for data gathering, environmental monitoring, industrial automation or surveillance, involve often low data rates and low transmission ranges. Despite the progress in software and hardware technologies, the energy efficiency is still one of the important constraints for the design of Wireless Sensor Network (WSN). For wireless sensor applications, nodes are usually deployed with reduced energy resources and without capability of battery replacement. Several techniques could be used to minimize the energy consumption of WSN. In this thesis we focus the physical layer and we propose to reduce the energy consumption by using low energy coding schemes. Firstly, a study allows us to deduce that in AWGN channel, Minimum-Energy Coding based on OOK modulation is energy efficiency, but at the price of lower spectrum efficiency. Only the transmission power is considered and the consumption of electronic circuits is not taken into account. Then, different energy consumption models are introduced to achieve energy efficiency analysis using realistic devices. The fact that Minimum-Energy coding based on OOK improves the energy efficiency performance is confirmed and the limits of practical circuits are highlighted. At last, the network protocol is addressed by introducing the ARQ error control protocol. Finally, the energy efficiency of an autonomous remote control is improved by using OOK orthogonal modulation and a real demonstrator is realized
Chen, Hu. "Exploiting Adaptive Techniques to Improve Processor Energy Efficiency". DigitalCommons@USU, 2016. https://digitalcommons.usu.edu/etd/4985.
Pełny tekst źródłaBao, Min. "System-Level Techniques for Temperature-Aware Energy Optimization". Licentiate thesis, Linköpings universitet, ESLAB - Laboratoriet för inbyggda system, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-60855.
Pełny tekst źródłaHankir, Mohammed Khair. "Investigating energy homeostasis using in vivo imaging techniques". Thesis, Imperial College London, 2010. http://hdl.handle.net/10044/1/10687.
Pełny tekst źródłaMarschalek, James. "Tools & techniques for reduced energy consumption with residential energy system example application". [Ames, Iowa : Iowa State University], 2009. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1464367.
Pełny tekst źródłaShao, Hui. "System design and power management for ultra low energy applications using energy harvesting techniques /". View abstract or full-text, 2009. http://library.ust.hk/cgi/db/thesis.pl?ECED%202009%20SHAO.
Pełny tekst źródłaBosko, Kristie L. (Kristie Lee). "Metered energy consumption and analysis of energy conservation techniques in desktop PCs and workstations". Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/64535.
Pełny tekst źródłaIncludes bibliographical references (p. 99-100).
This thesis investigates potential energy savings due to the application of power managed PCS, monitors, and workstations. The basis of this effort includes electric metering of such equipment at six preliminary and one primary location, a large business office in Boston, Massachusetts. Metering there occurred over an 8 week period, using an in-line metering device, and at a resolution of one minute intervals. The results of this study show that many problems exist in the field today which prevent any energy savings from being realized. These include both software and hardware incompatibilities. It was found that either the equipment was not enabled from the beginning; that various problems caused inadvertent disabling of the energy saving features, or that lack of knowledge about specific power management techniques caused the user to intentionally disable the features. Since this work began, the EPA's Energy Star Computers and Monitors Program updated their requirements such that energy saving features are now enabled when they are shipped from the manufacturer. All computers tested in this investigation were installed before the application of this condition, which was October 1, 1995. However, many problems exist other than those remedied by this requirement, including: computers which disengage from the network environment upon entering the lowest power management levels, various software incompatibilities, problematic methods of achieving power reduction, and little to no training of users or even prior negative experiences with power managed equipment There is a need for manufacturers to develop suitable or standard methods of achieving power management In addition, computer procurement employees or users must be taught about power management methods, and must have an opportunity to voice questions or concerns to manufacturers regarding power managed equipment. More research needs to be focused on network incompatibilities. Specifically, many computers are disconnected from their network upon engaging the lowest power level. This is due to either unacceptable power management methods or "stand-alone" power manageable computers which are placed on a network. Users purchasing computers intended for network use should be informed about whether the energy saving features are compatible with their type of network. This thesis is divided into two parts, the first for PCs and the second for workstations. The primary metering site for workstations was the Massachusetts Institute of Technology, which contains both Energy Star compliant and non-compliant machines. Opportunities for energy conservation in workstations are compared and contrasted to those of desktop PCs and monitors. In addition, current and future trends in workstation manufacturing and their impacts on energy conservation are explored.
by Kristie L. Bosko.
M.S.
Prathipati, Rajesh Babu. "Energy efficient scheduling techniques for real-time embedded systems". Thesis, Texas A&M University, 2003. http://hdl.handle.net/1969.1/194.
Pełny tekst źródłaRoussel, Harold. "Solution generating techniques in low energy effective string theory". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/NQ37018.pdf.
Pełny tekst źródłaMorgan, Paul. "Energy analysis and optimisation techniques for automatically synthesised coprocessors". Thesis, University of Glasgow, 2008. http://theses.gla.ac.uk/459/.
Pełny tekst źródłaAkbar, Sunila. "Heterogeneous cellular networks with energy and spectral efficient techniques". Thesis, King's College London (University of London), 2018. https://kclpure.kcl.ac.uk/portal/en/theses/heterogeneous-cellular-networks-with-energy-and-spectral-efficient-techniques(032b2fb8-07ab-474f-b9b7-1b93a4af29f0).html.
Pełny tekst źródłaHartley, Daniel Aaron 1977. "System shutdown techniques for energy efficient real time computation". Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/86465.
Pełny tekst źródłaIncludes bibliographical references (leaves 30-31).
by Daniel Aaron Hartley.
M.Eng.
Sanchez, William R. "Energy management techniques for ultra-small bio-medical implants". Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/75707.
Pełny tekst źródłaCataloged from PDF version of thesis.
Includes bibliographical references (p. 167-174).
Trends in the medical industry have created a growing demand for implantable medical devices. In particular, the need to provide medical professionals a means to continuously monitor bio-markers over long time scales with increased precision is paramount to efficient healthcare. To make medical implants more attractive, there is a need to reduce their size and power consumption. Small medical implants would allow for less invasive procedures and greater comfort for patients. The two primary limitations to the size of small medical implants are the batteries that provide energy to circuit and sensor components, and the antennas that enable wireless communication to terminals outside of the body. In this work we present energy management and low-power techniques to help solve the engineering challenges posed by using ultracapacitors for energy storage. A major problem with using any capacitor as an energy source is the fact that its voltage drops rapidly with decreasing charge. This leaves the circuit to cope with a large supply variation and can lead to energy being left on the capacitor when its voltage gets too low to supply a sufficient supply voltage for operation. Rather than use a single ultracapacitor, we demonstrate higher energy utilization by splitting a single capacitor into an array of capacitors that are progressively reconfigured as energy is drawn out. An energy management IC fabricated in 180-nm CMOS implements a stacking procedure that allows for more than 98% of the initial energy stored in the ultracapacitors to be removed before the output voltage drops unsuitably low for circuit operation. The second part of this work develops techniques for wide-input-range energy management. The first chip implementing stacking suffered an efficiency penalty by using a switchedcapacitor voltage regulator with only a single conversion ratio. In a second implementation, we introduce a better solution that preserves efficiency performance by using a multiple conversion ratio switched-capacitor voltage regulator. At any given input voltage from an ultracapcitor array, the switched-capacitor voltage regulator is configured to maximize efficiency. Fabricated in a 180-nm CMOS process, the chip achieves a peak efficiency of 90% and the efficiency does not fall below 70% for input voltages between 1.25 and 3 V.
by William R. Sanchez.
Ph.D.
Kandala, Veera Raghavendra Sai Mallik. "ENERGY EFFICIENT CIRCUIT TECHNIQUES FOR SUCCESSIVE APPROXIMATION REGISTER ADC". OpenSIUC, 2012. https://opensiuc.lib.siu.edu/dissertations/539.
Pełny tekst źródłaAnkerfors, Mikael. "Microfibrillated cellulose : Energy-efficient preparation techniques and key properties". Licentiate thesis, KTH, Fiberteknologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-102949.
Pełny tekst źródłaQC 20120928
AbuAli, Mohamed. "Techniques for Non-Intrusive Machine Energy and Health Modeling". University of Cincinnati / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1282056290.
Pełny tekst źródłaAgale, Ketaki. "Comparing Building Energy Benchmarking Metrics using Dimension Reduction Techniques". University of Cincinnati / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1563526931938378.
Pełny tekst źródłaKreinar, David J. "Energy Management Techniques for Hybrid Electric Unmanned Aircraft Systems". University of Dayton / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=dayton159640308960136.
Pełny tekst źródłaOsuolale, Funmilayo Nihinlola. "Energy efficient control and optimisation techniques for distillation processes". Thesis, University of Newcastle upon Tyne, 2015. http://hdl.handle.net/10443/3038.
Pełny tekst źródłaRobins, Michael John. "Local energy feature tracing in digital images and volumes". University of Western Australia. Dept. of Computer Science, 1999. http://theses.library.uwa.edu.au/adt-WU2003.0010.
Pełny tekst źródłaWojcik, Randolph Frank. "Dual energy scanning beam X -radiography". W&M ScholarWorks, 2004. https://scholarworks.wm.edu/etd/1539623461.
Pełny tekst źródłaHannah, Paul. "Application of wind modelling techniques in complex terrain". Thesis, University of East Anglia, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.272741.
Pełny tekst źródłaHwang, Taewon. "Iterative Techniques Based on Energy Spreading Transform for Wireless Communications". Diss., Georgia Institute of Technology, 2005. http://hdl.handle.net/1853/7509.
Pełny tekst źródłaRubio, López Javier. "Resource management techniques for sustainable networks with energy harvesting nodes". Doctoral thesis, Universitat Politècnica de Catalunya, 2016. http://hdl.handle.net/10803/396309.
Pełny tekst źródłaAquesta tesis doctoral proposa tècniques per assignar els recursos disponibles a les xarxes wireless considerant que els radis de cobertura són petits, el que implica que altres fonts de consum d’energia no considerades fins al moment s’hagin d’introduir dins els dissenys, i considerant que els dispositius estan alimentats amb bateries finites i que tenen a la seva disposició fonts de energy harvesting. En aquest context, es consideren dues configuracions diferents en funció de les capacitats de l’energia harvesting. En primer lloc, s’assumirà que la font d’energia és externa i incontrolable com, per exemple, l’energia solar. Els dissenys proposats han d’adaptar-se a l’energia que s’està recol·lectant en un precís moment. En segon lloc, es proposa un disseny en el qual el transmissor és capaç d’enviar energia als receptors mitjançant senyals de radiofreqüència dissenyats per aquest fi, energia que és utilitzada per recarregar les bateries. A part de tècniques d’assignació de recursos radio, en aquesta tesis doctoral es desenvolupa un procediment dinàmic per apagar i encendre estacions base. És important notar que el perfil de tràfic no és constant al llarg del dia. Aquest és precisament el patró que es pot explotar per definir una estratègia dinàmica per poder decidir quines estaciones base han de ser apagades, tot això sense afectar la qualitat experimentada pels usuaris. Gràcies a aquest procediment, es possible desplegar fonts d'energy harvesting més petites i bateries més petites. Finalment, aquesta tesis doctoral presenta procediments per optimitzar decisions de nivell més alt que afecten directament al funcionament global de la xarxa d’accés. Per prendre aquestes decisions, es fa ús de diverses variables que pertanyen a diferents capes de la pila de protocols. En aquest context, aquesta tesis aborda el disseny de tècniques de control d’admissió d’usuaris a estacions base en entorns amb múltiples estacions base, basant-se amb la informació estadística dels canals, i el nivell actual de les bateries, entre altres. L'escenari considerat està format per múltiples estacions base, on cada estació base pertany a una família amb diferents capacitats, per exemple, potència de transmissió o mida de la bateria. Es deriven un conjunt de tècniques amb diferents costos computacionals que són d'utilitat per a poder aplicar a escenaris amb diferents mobilitats d’usuaris.
Miozzo, Marco. "Energy sustainability of next generation cellular networks through learning techniques". Doctoral thesis, Universitat Politècnica de Catalunya, 2018. http://hdl.handle.net/10803/663203.
Pełny tekst źródłaCon la llegada de la nueva generación de redes móviles, la quinta generación (5G), se predice un aumento por un factor 1000 en la demanda de capacidad respecto a la 4G, con la consecuente instalación de nuevas infraestructuras. Se estima que el gasto energético de las tecnologías de la información y la comunicación podría alcanzar el 51% de la producción mundial de energía en el año 2030, principalmente debido al impacto de las redes y servicios móviles. Consecuentemente, los costes relacionados con el consumo de energía pasarán a ser una componente predominante en los gastos operativos (OPEX) de las operadoras de redes móviles. Por lo tanto, un control eficiente del consumo energético de las redes 5G, ya no es simplemente deseable, sino esencial. En la última década, la comunidad científica ha enfocado sus esfuerzos en la eficiencia energética (EE) de las redes de comunicaciones móviles, con particular énfasis en algoritmos para apagar y encender las estaciones base (BS). Además, las arquitecturas 5G introducirán el paradigma de las redes heterogéneas (HetNet), donde pequeñas BSs, o small BSs (SBSs), serán desplegadas para ayudar a las grandes macro BSs en satisfacer la gran demanda de tráfico y reducir el impacto en el consumo energético. Sin embargo, solo con la introducción de técnicas de captación de la energía ambiental, las redes pueden alcanzar los ahorros energéticos requeridos para mitigar los altos costes de la energía y su impacto en el medio ambiente. En el caso de las HetNets alimentadas mediante energías renovables, la naturaleza errática e intermitente de esta tipología de energías constituye una complejidad añadida al problema. La energía solar ha sido utilizada como referencia debido a su gran implantación y su alta eficiencia en términos de cantidad de energía producida respecto costes de producción. Por consiguiente, en la primera parte de la tesis se presenta un modelo de captación de la energía solar basado en un riguroso modelo estocástico de Markov que representa la energía capturada por paneles solares para exteriores. El escenario típico de HetNet supondrá el despliegue denso de SBSs con un alto nivel de flexibilidad, lo cual sugiere la utilización de sistemas de control distribuidos en lugar de aquellos que están centralizados, donde la adaptabilidad podría convertirse rápidamente en un reto difícilmente gestionable. Por esta razón, en la segunda parte de la tesis proponemos modelar las SBSs como un sistema multiagente de aprendizaje automático por refuerzo, donde cada SBS es un agente inteligente y autónomo que aprende interactuando directamente con su entorno y utilizando su experiencia acumulada. Los agentes en cada SBS aprenden independientemente políticas de control del apagado y encendido que les permiten maximizar conjuntamente el rendimiento y el consumo energético a nivel de sistema, adaptándose a condiciones dinámicas del ambiente tales como la energía renovable entrante y la demanda de tráfico. No obstante, los sistemas multiagente sufren problemas de coordinación cuando tienen que hallar simultáneamente una solución de forma distribuida que sea buena para todo el sistema. A tal efecto, el paradigma de aprendizaje por niveles ha sido utilizado para simplificar el problema dividiéndolo en subtareas. Más detalladamente, la solución global se consigue de forma jerárquica: el proceso de aprendizaje de una subtarea está dirigido a ayudar al aprendizaje de la subtarea del nivel superior. El primer nivel contempla un sistema multiagente de aprendizaje automático por refuerzo y se encarga de la optimización en línea de las SBSs en función de la demanda de tráfico y de la energía entrante. El segundo nivel se encarga de la optimización a nivel de red del sistema y está basado en redes neuronales artificiales diseñadas para estimar el modelo de todas las BSs
Levy, Renato. "Optimization Techniques for Energy-Aware Memory Allocation in Embedded Systems". Diss., Computer Science, George Washington University, 2004. http://hdl.handle.net/1961/116.
Pełny tekst źródłaA common practice to save power and energy in embedded systems is to "put to sleep" or disable parts of the hardware. The memory system consumes a significant portion of the energy budget of the overall system, so it is a natural target for energy optimization techniques. The principle of software locality makes the memory subsystem an even better choice, since all memory blocks but the ones immediately required can be disabled at any given time. This opportunity is the motivation for developing energy optimization techniques to dynamically and selectively control the power state of the different parts of the memory system. This dissertation develops a set of algorithms and techniques that can be organized into a hardware/software co-development tool to help designers apply the selective powering of memory blocks to minimize energy consumption. In data driven embedded systems, most of the data memory is used either by global static variables or by dynamic variables. Although techniques already exist for energy-aware allocation of global static arrays under certain constraints, very little work has focused on dynamic variables, which are actually more important to event driven/data driven embedded systems than their static counterparts. This dissertation addresses this gap, and extends and consolidates previous allocation techniques in a unique framework. A formal model for memory energy optimization for dynamic and global static variables and efficient algorithms for energy aware allocation of variables to memory are presented. Dependencies between generic code and data are uncovered, and this information is exploited to fine-tune a system. A framework is presented for retrieving this profile information which is then used to design energy aware allocation algorithms for dynamic variables, including heuristics for segmentation and control of the memory heap. By working at the assembly code level, these techniques can be integrated into any compiler regardless of the source language. The proposed techniques were implemented and tested against data intensive benchmarks, and experimental results indicate significant savings of up to 50% in the memory system energy consumption.
Advisory Committee: Professor Bhagirath Narahari, Professor Hyoeong-Ah Choi (Chair), Professor Rahul Simha, Professor Shmuel Rotenstreich, Professor Can E. Korman, Dr. Yul Williams
Squire, Theresa-Jane. "Accurate spectrophotometric optical properties measurement techniques for solar energy materials". Thesis, Oxford Brookes University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287720.
Pełny tekst źródłaAnkerfors, Mikael. "Microfibrillated cellulose: Energy-efficient preparation techniques and applications in paper". Doctoral thesis, KTH, Fiberteknologi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-159222.
Pełny tekst źródłaQC 20150126
Ghosh, Mrinmoy. "Microarchitectural techniques to reduce energy consumption in the memory hierarchy". Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28265.
Pełny tekst źródłaCommittee Chair: Lee, Hsien-Hsin S.; Committee Member: Cahtterjee,Abhijit; Committee Member: Mukhopadhyay, Saibal; Committee Member: Pande, Santosh; Committee Member: Yalamanchili, Sudhakar.
Wang, Alice 1975. "An ultra-low voltage FFT processor using energy-aware techniques". Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/17669.
Pełny tekst źródłaPage 170 blank.
Includes bibliographical references (p. 165-169).
In a number of emerging applications such as wireless sensor networks, system lifetime depends on the energy efficiency of computation and communication. The key metric in such applications is the energy dissipated per function rather than traditional ones such as clock speed or silicon area. Hardware designs are shifting focus toward enabling energy-awareness, allowing the processor to be energy-efficient for a variety of operating scenarios. This is in contrast to conventional low-power design, which optimizes for the worst-case scenario. Here, three energy-quality scalable hooks are designed into a real-valued FFT processor: variable FFT length (N=128 to 1024 points), variable bit precision (8,16 bit), and variable voltage supply with variable clock frequency (VDD=1 80mV to 0.9V, and f=164Hz to 6MHz). A variable-bit-precision and variable-FFT-length scalable FFT ASIC using an off-the-shelf standard-cell logic library and memory only scales down to 1V operation. Further energy savings is achieved through ultra-low voltage-supply operation. As performance requirements are relaxed, the operating voltage supply is scaled down, possibly even below the threshold voltage into the subthreshold region. When lower frequencies cause leakage energy dissipation to exceed the active energy dissipation, there is an optimal operating point for minimizing energy consumption.
(cont.) Logic and memory design techniques allowing ultra-low voltage operation are employed to study the optimal frequency/voltage operating point for the FFT. A full-custom implementation with circuit techniques optimized for deep voltage scaling into the subthreshold regime, is fabricated using a standard CMOS 0.18[mu]m logic process and functions down to 180mV. At the optimal operating point where the voltage supply is 350mV, the FFT processor dissipates 155nJ/FFT. The custom FFT is 8x more energy-efficient than the ASIC implementation and 350x more energy-efficient than a low-power microprocessor implementation.
by Alice Wang.
Ph.D.
Dalton, Alexander Jonathan MacGregor. "Daily energy expenditure of northern fur seals : techniques and measurements". Thesis, University of British Columbia, 2014. http://hdl.handle.net/2429/46004.
Pełny tekst źródłaAbidoye, Ademola Philip. "Energy optimization for wireless sensor networks using hierarchical routing techniques". University of the Western Cape, 2015. http://hdl.handle.net/11394/7064.
Pełny tekst źródłaWireless sensor networks (WSNs) have become a popular research area that is widely gaining the attraction from both the research and the practitioner communities due to their wide area of applications. These applications include real-time sensing for audio delivery, imaging, video streaming, and remote monitoring with positive impact in many fields such as precision agriculture, ubiquitous healthcare, environment protection, smart cities and many other fields. While WSNs are aimed to constantly handle more intricate functions such as intelligent computation, automatic transmissions, and in-network processing, such capabilities are constrained by their limited processing capability and memory footprint as well as the need for the sensor batteries to be cautiously consumed in order to extend their lifetime. This thesis revisits the issue of the energy efficiency in sensor networks by proposing a novel clustering approach for routing the sensor readings in wireless sensor networks. The main contribution of this dissertation is to 1) propose corrective measures to the traditional energy model adopted in current sensor networks simulations that erroneously discount both the role played by each node, the sensor node capability and fabric and 2) apply these measures to a novel hierarchical routing architecture aiming at maximizing sensor networks lifetime. We propose three energy models for sensor network: a) a service-aware model that account for the specific role played by each node in a sensor network b) a sensor-aware model and c) load-balancing energy model that accounts for the sensor node fabric and its energy footprint. These two models are complemented by a load balancing model structured to balance energy consumption on the network of cluster heads that forms the backbone for any cluster-based hierarchical sensor network. We present two novel approaches for clustering the nodes of a hierarchical sensor network: a) a distanceaware clustering where nodes are clustered based on their distance and the residual energy and b) a service-aware clustering where the nodes of a sensor network are clustered according to their service offered to the network and their residual energy. These approaches are implemented into a family of routing protocols referred to as EOCIT (Energy Optimization using Clustering Techniques) which combines sensor node energy location and service awareness to achieve good network performance. Finally, building upon the Ant Colony Optimization System (ACS), Multipath Routing protocol based on Ant Colony Optimization approach for Wireless Sensor Networks (MRACO) is proposed as a novel multipath routing protocol that finds energy efficient routing paths for sensor readings dissemination from the cluster heads to the sink/base station of a hierarchical sensor network. Our simulation results reveal the relative efficiency of the newly proposed approaches compared to selected related routing protocols in terms of sensor network lifetime maximization.
Nguyen, Viet-Hoa. "Energy-efficient cooperative techniques for wireless body area sensor networks". Thesis, Rennes 1, 2016. http://www.theses.fr/2016REN1S011/document.
Pełny tekst źródłaAmong various cooperative techniques aiming to reduce power consumption for transmissions between Wireless Body Area Networks (WBAN) and base stations, we present a new approach, named distributed max-dmin precoding (DMP), combining MIMO precoding techniques and relay communications. This protocol is based on the deployment of a virtual 2 × 2 max-dmin precoding over one source, one forwarding relay, both equipped with one antenna and a destination involving 2 antennas. In this context, two kinds of relaying, amplify and forward (AF) or decode and forward (DF) protocols, are investigated. The performance evaluation in terms of Bit-Error-Rate (BER) and energy efficiency are compared with non cooperative techniques and the distributed space time block code (STBC) scheme. Our investigations show that the DMP takes the advantage in terms of energy efficiency from medium transmission distances (after 10 meters). In order to maximise the energy efficiency, we propose a power allocation over the source and the relay. Thus, we derive the performance of our system, both for AF and DF, analytically. To further increase the performance of DF cooperative schemes, we also propose to design a new decoder at the destination that takes profit from side information, namely potential errors at the relay