Zaloguj się

Gotowe bibliografie tematyczne / Electroless plating / Artykuły w czasopismach

Artykuły w czasopismach na temat „Electroless plating”

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Electroless plating.

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Electroless plating”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

SAITO, Mamoru. "Electroless Plating. Recent Trend of Electroless Plating." Journal of the Surface Finishing Society of Japan 48, nr 4 (1997): 375–79. http://dx.doi.org/10.4139/sfj.48.375.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Sun, Hua, Xiao Fei Guo, Ke Gao Liu, Hong Fang Ma i Li Ming Feng. "Influence of Ultrasonic on the Microstructure and Properties of Electroless Plating Ni-Co-P Coating at Low Temperature". Advanced Materials Research 314-316 (sierpień 2011): 259–62. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.259.

Pełny tekst źródła

Streszczenie:

By electron energy spectrometer,X-ray diffractometer,transmission elec-tron microscopy andmicro-hardometer,the depositing speed of electrolessNi-Co-P plating baths,chemical composition,crystal structure and microhardness of the alloy coatings were inspected and analyzed with ultrasonic and rare earth metalcerium intervening in electroless Ni-Co-P plating•The results show that the depositing speed of electroless Ni-Co-P plating isobviously increased under the effect of ultrasonic.The chemical compositions of electroless Ni-Co-P plating are changed，The XRD of coating has a diffuse sexual diffraction peak closing to typical amorphous structure.the obtained Ni-Co-P coating has more fine crystal grain, even and dense surface morphology. Its wear resistance and hardness have been improved obviously.

Style APA, Harvard, Vancouver, ISO itp.

3

HARADA, Hisashi. "Electroless Plating". Journal of the Japan Society of Colour Material 69, nr 1 (1996): 60–70. http://dx.doi.org/10.4011/shikizai1937.69.60.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

UCHIDA, Ei. "Electroless Plating. Electroless Palladium Plating and Its Applications." Journal of the Surface Finishing Society of Japan 48, nr 4 (1997): 400–404. http://dx.doi.org/10.4139/sfj.48.400.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

SAKATA, Takahiro, i Hideo HONMA. "Electroless copper plating by applying electrolysis." Journal of the Surface Finishing Society of Japan 40, nr 3 (1989): 488–89. http://dx.doi.org/10.4139/sfj.40.488.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Uraz, Canan, i Tuğba Gürmen Özçelik. "ELECTROLESS METAL PLATING OVER ABS PLASTIC". E-journal of New World Sciences Academy 14, nr 2 (29.04.2019): 63–70. http://dx.doi.org/10.12739/nwsa.2019.14.2.1a0432.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

SHIBATA, Mitsuo. "Electroless Plating. Direct Electroless Nickel Plating on Magnesium Alloys." Journal of the Surface Finishing Society of Japan 48, nr 4 (1997): 413–16. http://dx.doi.org/10.4139/sfj.48.413.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

KAMIYAMA, Hiroharu. "Electroless copper plating." Circuit Technology 4, nr 6 (1989): 318–26. http://dx.doi.org/10.5104/jiep1986.4.318.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

HONMA, Hideo, Yasunori KOUCHI i Masaaki OYAMADA. "Electroless Solder Plating." Circuit Technology 6, nr 6 (1991): 299–305. http://dx.doi.org/10.5104/jiep1986.6.6_299.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Brown, L. D. "Electroless nickel plating". International Materials Reviews 37, nr 1 (styczeń 1992): 196. http://dx.doi.org/10.1179/imr.1992.37.1.196.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Brown, L. D. "‘Electroless nickel plating’". British Corrosion Journal 27, nr 1 (styczeń 1992): 25–26. http://dx.doi.org/10.1179/000705992798268882.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Henry, James R. "Electroless (autocatalytic) plating". Metal Finishing 98, nr 1 (styczeń 2000): 424–35. http://dx.doi.org/10.1016/s0026-0576(00)80351-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Henry, James R. "Electroless (autocatalytic) plating". Metal Finishing 97, nr 1 (styczeń 1999): 424–35. http://dx.doi.org/10.1016/s0026-0576(00)83102-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Henry, James R. "Electroless (autocatalytic) plating". Metal Finishing 99 (styczeń 2001): 424–35. http://dx.doi.org/10.1016/s0026-0576(01)85302-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Henry, James R. "Electroless (autocatalytic) plating". Metal Finishing 100 (styczeń 2002): 409–20. http://dx.doi.org/10.1016/s0026-0576(02)82044-x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Henry, James R. "Electroless (autocatalytic) plating". Metal Finishing 97, nr 1 (styczeń 1999): 431–42. http://dx.doi.org/10.1016/s0026-0576(99)80044-0.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Baudrand, Don, i Jon Bengston. "Electroless plating processes". Metal Finishing 93, nr 9 (wrzesień 1995): 55–57. http://dx.doi.org/10.1016/0026-0576(95)99502-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

NAKAGISHI, Yutaka. "Electroless Plating. Functional Separation and Application of Electroless Nickel Plating." Journal of the Surface Finishing Society of Japan 48, nr 4 (1997): 380–86. http://dx.doi.org/10.4139/sfj.48.380.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

NISHIYAMA, Kouji, i Hideto WATANABE. "Electroless Plating. The Type and Application of Electroless Gold Plating." Journal of the Surface Finishing Society of Japan 48, nr 4 (1997): 393–99. http://dx.doi.org/10.4139/sfj.48.393.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

NITTA, Masahiro, i Hiroshi ADACHI. "Electroless Plating. Deep Black Electroless Nickel Plating-Phos Black II." Journal of the Surface Finishing Society of Japan 48, nr 4 (1997): 417–19. http://dx.doi.org/10.4139/sfj.48.417.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Liu, Guan Jun, Xin Hua Mao, Jun Cao i Zhou Yu. "Effect of Heat Treatment on Hardness of Electroless Ni-P Plating". Advanced Materials Research 228-229 (kwiecień 2011): 878–82. http://dx.doi.org/10.4028/www.scientific.net/amr.228-229.878.

Pełny tekst źródła

Streszczenie:

Hardness of electronless Ni-P alloy plating which have five different phosphorus content were investigated with HX-1000 type microscopic Vickers hardness tester, respectively. Phosphorus content of Ni-P platings were investigated by Quanta 200 type scanning electron microscope and Oxford Energy Disperse Spectroscopy Heat treatment temperature and time of the different platings were optimized and analysed by Uniform Design method, respectively. The results show that correlation consist between maximum hardness of the Ni-P alloy plating and heat treatment temperature, not heat treatment time under the experimental condition which the heat treatment time is between one hour and five hours, and maximal value of the plating hardness appears when the heat treatment temperature is 400-430 Celsius degree. Maximal hardness value of the electronless Ni-P alloy plating increases with increase of their phosphorus content under heat treatment condition.

Style APA, Harvard, Vancouver, ISO itp.

22

Liu, Yan Ping, Yan Mei Zhang, Yuan Gao i Zhong Xu. "The Influence of Impulse Electroless Plating on Amorphous Ni-P Alloys in Structure and Hot Stability". Materials Science Forum 475-479 (styczeń 2005): 3989–92. http://dx.doi.org/10.4028/www.scientific.net/msf.475-479.3989.

Pełny tekst źródła

Streszczenie:

Using a special impulse device, the impulse electroless Ni-P alloy plating were prepared. The microstructure、crystallization and the starting activation energy for crystallization was investigated by TEM、XRD and DTA, compared with electroless Ni-P alloys plating. The results showed that the diffractive ring was wider when using impulse, depositing temperature dropped up to 65°C,and crystallization temperature rose up to 310°C. Furthermore , the starting activation energy for crystallization and crystallization temperature of impulse electroless Ni-P alloys plating measured were more than that of electroless plating in the heating rate at 5、10、20、 40K/min, and it was also higher in the amorphous disorder degree and the starting crystallization temperature. Impulse electroless Ni-P alloys plating had better performance of thermal stability.

Style APA, Harvard, Vancouver, ISO itp.

23

FUJINAMI, Tomoyuki. "Electroless Plating. Various Functional Applications of Formalin-Free Electroless Copper Plating." Journal of the Surface Finishing Society of Japan 48, nr 4 (1997): 387–92. http://dx.doi.org/10.4139/sfj.48.387.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Wanping, Chen, Li Longtu i Gui Zhilun. "Effects of Electroless Nickel Plating on Resistivity-temperature Characteristics of (Ba1-xPbx)TiO3thermistor". Journal of Materials Research 12, nr 4 (kwiecień 1997): 877–79. http://dx.doi.org/10.1557/jmr.1997.0127.

Pełny tekst źródła

Streszczenie:

Effects of electroless nickel plating on resistivity-temperature (R-T) characteristics of (Ba1-xPbx)TiO3 thermistor were studied. Comparison experiments showed that not only the permeation of plating solution, but also the reaction of electroless nickel plating influences the positive temperature coefficient (PTC) effect, and that the two effects are different in nature. It is first proposed in this paper that hydrogen atoms generated in electroless nickel plating may reduce components of PTC ceramics.

Style APA, Harvard, Vancouver, ISO itp.

25

Feng, Li Ming, i Xue Wei. "On the Dispersants of Diamond-Ni-P Composite Electroless Plating and Properties of the Coating". Advanced Materials Research 189-193 (luty 2011): 181–85. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.181.

Pełny tekst źródła

Streszczenie:

In order to obtain stable and homogeneous diamond-Ni-P composite electroless plating, dispersants were selected by determining the height of emulsion in the colorimetric cylinder after standing different time.The structure,elemental contents and properties of the diamond-Ni-P composite electroless plating coating were investigated by SEM and EDS. Experimental results show that OP-10 of 50mL•L-1 and softex kw of 1g•L-1 have better dispersing effect to diamond powder of 1g•L-1 in water. This composite electroless plating solution can keep stable for more than twelve or eight hours respectively at 85°C. While in the electroless plating solution, Softex kw of 1g•L-1 has better dispersing effect and can be stable for more than two hours at 85°C. The diamond powder grains in the composite coating are homogeneous and the content of carbon is 2.261 wt% under the certain amount of the selected dispersant. When the content of diamond was 5g•L-1 in the solution, the diamond powders were dispersed non-homogeneously in plating and cluster phenomena were appeared. The composite electroless plating coating consists of amorphous Ni-P and diamond powder. Its hardness and porosity are similar to those of the electroless plating Ni-P coating. The wear-resisting is improved greatly,which is 2.6 times of electroless plating Ni-P or 2 times of that after heat treatment at 400°C for one hour.

Style APA, Harvard, Vancouver, ISO itp.

26

ZHAO, YAN, RUN ZHANG, TONG ZHANG i YUEXIN DUAN. "EFFECT OF DIFFERENT PRETREATMENTS TO ELECTROLESS NICKEL OR COBALT PLATING ON HOLLOW MICROSPHERES". International Journal of Modern Physics B 24, nr 15n16 (30.06.2010): 2706–11. http://dx.doi.org/10.1142/s0217979210065507.

Pełny tekst źródła

Streszczenie:

Different pretreatment methods for electroless nickel and cobalt plating are demonstrated and compared in the present investigation. The surface morphologies of the nickel or cobalt deposits are investigated by scanning electron microscopy (SEM), and the chemical compositions of the coatings are analyzed by energy-dispersive X-ray spectroscopy (EDX). Method of single-step pretreatment is selected as the optimized method for electroless nickel plating process, while improved two-step sensitization-activation and single-step pretreatment methods can be selected for electroless cobalt plating. It can be found that the content of free Co is much lower compared to electroless Ni plating.

Style APA, Harvard, Vancouver, ISO itp.

27

Dervos, C. T., P. Vassiliou i J. Novakovic. "Electroless Ni-B plating for electrical contact applications". Revista de Metalurgia 41, Extra (17.12.2005): 232–38. http://dx.doi.org/10.3989/revmetalm.2005.v41.iextra.1031.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

URAZ, Canan. "Effect of Room Temperature Ionic Liquids for Electroless Nickel Plating on Acrylonitrile Butadiene Styrene Plastic". Materials Science 25, nr 3 (10.05.2019): 276–80. http://dx.doi.org/10.5755/j01.ms.25.3.20116.

Pełny tekst źródła

Streszczenie:

In this study, electroless nickel (EN) plating on acrylonitrile butadiene styrene (ABS) engineering plastic using room temperature ionic liquids (RTIL) was studied. Electroless plating is a fundamental step in metal plating on plastic. This step makes the plastic conductive and makes it possible to a homogeneous and hard plating without using any hazardous and unfriendly chemical such as palladium, tin, etc. In the industry there are many distinct chemical materials both catalysts and activation solutions for the electroless bath which is one of the most important parts of the process. In this study the effects of the ionic liquid, plating time, and sand paper size were investigated on electroless nickel plating. The etching and the plating processes were performed with environmentally friendly chemicals instead of the chromic and sulphuric acids used in the traditional processes. Experiments were carried out with and without ionic liquid, EMIC, 1-ethyl-3-methyl imidazolium chloride (C6H11N2Cl), and with 400, 500 and 800 grit sandpaper with the application of the sand attrition process and 70, 80, and 90 °C bath temperatures with 30, 60, and 90 minutes of deposition time. The surface morphology and the thickness of deposit analysis were performed using the Fischer scope X-Ray XDL-B System, X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM). Due to the results of the experiments and analysis, the electroless nickel plating on ABS plastic was a success. The best plating was obtained at 5.010 μm as the maximum plating thickness, at 90 min of plating time and 80 °C as the plating bath temperature for electroless nickel plating on ABS plastic whit the surface activated with 800 grit sandpaper using EMIC ionic liquid. DOI: http://dx.doi.org/10.5755/j01.ms.25.3.20116

Style APA, Harvard, Vancouver, ISO itp.

29

Wu, Ming Ming, i Bai Yang Lou. "Preparation and Corrosion Resistance of Electroless Plating of Ni-Cr-P/Ni-P Composite Coating on Sintered Nd-Fe-B Permanent Magnet". Advanced Materials Research 284-286 (lipiec 2011): 2187–90. http://dx.doi.org/10.4028/www.scientific.net/amr.284-286.2187.

Pełny tekst źródła

Streszczenie:

This paper introduces electroless plating Ni-Cr-P/Ni-P composite coating technologies and techniques on the Nd-Fe-B permanent magnet surface. It has got a Ni-Cr-P/Ni-P composite coating successfully on the Nd-Fe-B substrate surface through rational processing plan. The coating surfaces are bright and have low Porosity, good binding between the electroless plating and Nd-Fe-B matrix. The experimental results show that the composite coating prepared by Ni-Cr-P electroless plating (15min) and Ni-P acidic electroless plating (45min) has amorphous structure, simple process and better anticorrosion property in both alkaline and acidic medium.

Style APA, Harvard, Vancouver, ISO itp.

30

KOBAYASHI, Michio, i Tadashi IIMORI. "Electroless plating on titanium." Jitsumu Hyomen Gijutsu 35, nr 6 (1988): 312–18. http://dx.doi.org/10.4139/sfj1970.35.312.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

KOURA, Nobuyuki, i Atsushi KUBOTA. "Electroless plating of silver." Journal of the Metal Finishing Society of Japan 36, nr 5 (1985): 182–90. http://dx.doi.org/10.4139/sfj1950.36.182.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

NAKAZATO, Junichi, Kei HASHIZUME i Toru MORIMOTO. "Black Electroless Ni Plating". Journal of the Surface Finishing Society of Japan 66, nr 11 (2015): 503–6. http://dx.doi.org/10.4139/sfj.66.503.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

WATANABE, Hideto. "Electroless Precious Metal Plating". Journal of The Surface Finishing Society of Japan 70, nr 9 (1.09.2019): 435–40. http://dx.doi.org/10.4139/sfj.70.435.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

NAKAO, YUKIMICHI. "Electroless Plating of Paper". Sen'i Gakkaishi 42, nr 12 (1986): P510—P514. http://dx.doi.org/10.2115/fiber.42.12_p510.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Ohtsuka, Kuniaki, Kazuyoshi Okuno, Noriko Hattori i Eiichi Torikai. "Electroless Gold Plating Solution". Transactions of the IMF 69, nr 1 (styczeń 1991): 33–36. http://dx.doi.org/10.1080/00202967.1991.11870888.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Ohno, Izumi. "Electrochemistry of electroless plating". Materials Science and Engineering: A 146, nr 1-2 (październik 1991): 33–49. http://dx.doi.org/10.1016/0921-5093(91)90266-p.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

"Electroless plating apparatus and electroless plating method". Metal Finishing 103, nr 6 (czerwiec 2005): 67–68. http://dx.doi.org/10.1016/s0026-0576(05)80105-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

"Electroless plating solution". Metal Finishing 98, nr 2 (luty 2000): 119. http://dx.doi.org/10.1016/s0026-0576(00)81463-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

"Electroless plating process". Metal Finishing 98, nr 5 (maj 2000): 93–94. http://dx.doi.org/10.1016/s0026-0576(00)81789-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

"Electroless nickel plating". Metal Finishing 98, nr 7 (lipiec 2000): 71–72. http://dx.doi.org/10.1016/s0026-0576(00)82397-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

"Monitoring electroless plating". Metal Finishing 98, nr 11 (listopad 2000): 109–10. http://dx.doi.org/10.1016/s0026-0576(00)83673-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

"Electroless plating process". Metal Finishing 97, nr 6 (czerwiec 1999): 172. http://dx.doi.org/10.1016/s0026-0576(00)84033-7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

"Electroless copper plating". Metal Finishing 97, nr 8 (sierpień 1999): 77–78. http://dx.doi.org/10.1016/s0026-0576(01)80190-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

"Electroless plating process". Metal Finishing 99, nr 5 (maj 2001): 86. http://dx.doi.org/10.1016/s0026-0576(01)80884-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

"Electroless plating process". Metal Finishing 99, nr 5 (maj 2001): 88. http://dx.doi.org/10.1016/s0026-0576(01)80894-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

"Electroless plating method". Metal Finishing 99, nr 7 (lipiec 2001): 76. http://dx.doi.org/10.1016/s0026-0576(01)81164-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

"Electroless plating process". Metal Finishing 94, nr 11 (listopad 1996): 120. http://dx.doi.org/10.1016/s0026-0576(96)92782-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

"Electroless plating process". Metal Finishing 100, nr 6 (czerwiec 2002): 158. http://dx.doi.org/10.1016/s0026-0576(02)80539-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

"Electroless nickel plating". Metal Finishing 101, nr 3 (marzec 2003): 34. http://dx.doi.org/10.1016/s0026-0576(03)80267-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

"Electroless plating bath". Metal Finishing 95, nr 6 (czerwiec 1997): 168–69. http://dx.doi.org/10.1016/s0026-0576(97)89134-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!