Gotowa bibliografia na temat „Elastomeric thermoplastic”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Elastomeric thermoplastic”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Elastomeric thermoplastic"
Matsuda, Akihiro, i Shigeru Kawahara. "Applicability of Thermoplastic Elastomers to Impact Load Reduction in Sports Equipment". Proceedings 49, nr 1 (15.06.2020): 163. http://dx.doi.org/10.3390/proceedings2020049163.
Pełny tekst źródłaKresge, E. N. "Polyolefin Thermoplastic Elastomer Blends". Rubber Chemistry and Technology 64, nr 3 (1.07.1991): 469–80. http://dx.doi.org/10.5254/1.3538564.
Pełny tekst źródłaSchönherr, Holger, Willy Wiyatno, John Pople, Curtis W. Frank, Gerald G. Fuller, Alice P. Gast i Robert M. Waymouth. "Morphology of Thermoplastic Elastomers: Elastomeric Polypropylene". Macromolecules 35, nr 7 (marzec 2002): 2654–66. http://dx.doi.org/10.1021/ma010959m.
Pełny tekst źródłaAbdou-Sabet, Sabet, i Raman P. Patel. "Morphology of Elastomeric Alloys". Rubber Chemistry and Technology 64, nr 5 (1.11.1991): 769–79. http://dx.doi.org/10.5254/1.3538589.
Pełny tekst źródłaEllul, Maria D., i Yuichi Hara. "SPECIALTY POLYMERS AND DYNAMICALLY VULCANIZED ALLOYS FOR ULTRA LOW AIR PERMEABILITY TIRE INNER LINERS". Rubber Chemistry and Technology 91, nr 4 (1.10.2018): 751–56. http://dx.doi.org/10.5254/rct.18.81542.
Pełny tekst źródłaAbdou-Sabet, S., R. C. Puydak i C. P. Rader. "Dynamically Vulcanized Thermoplastic Elastomers". Rubber Chemistry and Technology 69, nr 3 (1.07.1996): 476–94. http://dx.doi.org/10.5254/1.3538382.
Pełny tekst źródłaKozłowska, A., i M. Piatek-Hnat. "Evaluation of Influence of the Addition Nanofillers on the Mechanical and Thermal Properties Terpolymers Ester-Ether-Amide". Archives of Metallurgy and Materials 59, nr 1 (1.03.2014): 237–39. http://dx.doi.org/10.2478/amm-2014-0038.
Pełny tekst źródłaRahmatabadi, Davood, Mohammad Aberoumand, Kianoosh Soltanmohammadi, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Ali Zolfagharian, Mahdi Bodaghi i Mostafa Baghani. "A New Strategy for Achieving Shape Memory Effects in 4D Printed Two-Layer Composite Structures". Polymers 14, nr 24 (13.12.2022): 5446. http://dx.doi.org/10.3390/polym14245446.
Pełny tekst źródłaMadkour, Tarek M., i James E. Mark. "Properties of thermoplastic elastomeric polypropylene". Polymer Bulletin 39, nr 3 (wrzesień 1997): 385–91. http://dx.doi.org/10.1007/s002890050163.
Pełny tekst źródłaLegge, N. R. "Thermoplastic Elastomers—Three Decades of Progress". Rubber Chemistry and Technology 62, nr 3 (1.07.1989): 529–47. http://dx.doi.org/10.5254/1.3536257.
Pełny tekst źródłaRozprawy doktorskie na temat "Elastomeric thermoplastic"
Jindal, Aditya Jindal. "Electrospinning and Characterization of Polyisobutylene-based Thermoplastic Elastomeric Fiber Mats For Drug Release Application". University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1512483246405986.
Pełny tekst źródłaRAJAN, GURU SANKAR. "PREPARATION AND CHARACTERIZATION OF SOME UNUSUAL ELASTOMERIC AND PLASTIC COMPOSITES". University of Cincinnati / OhioLINK, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1022871144.
Pełny tekst źródłaAsplund, Basse. "Biodegradable Thermoplastic Elastomers". Doctoral thesis, Uppsala : Acta Universitatis Upsaliensis Acta Universitatis Upsaliensis, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-7434.
Pełny tekst źródłaZhou, Ruijuan [Verfasser], i Martin [Akademischer Betreuer] Maier. "Nanoparticle-Filled Thermoplastics and Thermoplastic Elastomer: Structure-Property Relationships / Ruijuan Zhou ; Betreuer: Martin Maier". Kaiserslautern : Technische Universität Kaiserslautern, 2017. http://d-nb.info/1138630527/34.
Pełny tekst źródłaKumar, Nishant C. "Anionically Polymerized Supramolecular Thermoplastic Elastomers". University of Akron / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=akron1427128414.
Pełny tekst źródłaScetta, Giorgia. "Fatigue cracking of thermoplastic elastomers". Electronic Thesis or Diss., Université Paris sciences et lettres, 2020. http://www.theses.fr/2020UPSLS022.
Pełny tekst źródłaSoft thermoplastic polyurethane elastomers (TPU) are a class of block copolymers characterised by a low linear modulus (<10MPa), reversible elasticity and excellent abrasion resistance already used in several rubber‐like applications such as soles, wheels, flexible cables, etc. Yet, their fatigue behaviour under cyclic loading has not been fully investigated so far, leaving several open questions about how predicting long‐term durability of TPUs for a safe design. In this work we proposed a reproducible experimental protocol to assess and compare the resistance to crack propagation in cyclic conditions of TPU, with that of classical filled rubbers by using a fracture mechanics approach. Furthermore, we characterized the mechanical response under cyclic loading at large and small strain of three commercial TPUs with similar linear moduli and rheology but different large strain behaviours: extended softening, strain hardening and strain hardening enhanced by SIC. Irrespectively of their composition, all TPUs presented an unconventional strain induced stiffening in step‐cyclic experiment. Using DIC and X‐Ray in situ experiments we showed that, the strain gradient at the crack tip generates a spatial re‐organization of the TPU microstructure consistent with a volume locally stiffer than the bulk. This heterogeneity in the deformability reduces the strain intensification at the crack tip explaining the high fatigue resistance in TPU. The local stiffening was ultimately associated to the fragmentation of original hard domains in smaller but more numerous units increasing the degree of physical crosslinking
Firko, Megan (Megan Rose). "Hot micro-embossing of thermoplastic elastomers". Thesis, Massachusetts Institute of Technology, 2008. http://hdl.handle.net/1721.1/54461.
Pełny tekst źródła"June 2008." Cataloged from PDF version of thesis.
Includes bibliographical references (p. 69-71).
Microfluidic devices have been a rapidly increasing area of study since the mid 1990s. Such devices are useful for a wide variety of biological applications and offer the possibility for large scale integration of fluidic chips, similar to that of electrical circuits. With this in mind, the future market for microfluidic devices will certainly thrive, and a means of mass production will be necessary. However PDMS, the current material used to fabricate the flexible active elements central to many microfluidic chips, imposes a limit to the production rate due to the curing process used to fabricate devices. Thermoplastic elastomers (TPEs) provide a potential alternative to PDMS. Soft and rubbery at room temperature, TPEs become molten when heated and can be processed using traditional thermoplastic fabrication techniques such as injection molding or casting. One promising fabrication technique for TPEs is hot micro-embossing (HME) in which a material is heated above its glass transition temperature and imprinted with a micromachined tool, replicating the negative of the tools features. Thus far, little research has been conducted on the topic of hot embossing TPEs, and investigations seeking to determine ideal processing conditions are non-existent. This investigation concerns the selection of a promising TPE for fabrication of flexible active elements, and the characterization of the processing window for hot embossing this TPE using a tool designed to form long winding channels, with feature heights of 66Cpm and widths of 80jpm. Ideal processing conditions for the tool were found to be pressures in the range of 1MPa-1.5MPa and temperatures above 1400.
(cont.) The best replication occurred at 1500 C and 1.5 MPa, and at these conditions channel depth was within 5% of the tool, and width was within 10%. For some processing conditions a smearing effect due to bulk material flow was observed. No upper limit on temperature was found, suggesting that fabrication processes in which the material is fully melted may also be suitable for fabrication of devices from TPEs.
by Megan Firko.
S.B.
Miller, Paul. "Sulfur Mustard penetration of thermoplastic elastomers". Fishermans Bend Vic. : Defence Science and Technology Organisation, 2008. http://nla.gov.au/nla.arc-24764.
Pełny tekst źródłaCanevarolo, Sebastiao V. "Melt behaviour of thermoplastic rubbers". Thesis, Loughborough University, 1986. https://dspace.lboro.ac.uk/2134/27871.
Pełny tekst źródłaPattern, Wayne Eric. "The synthesis and characterisation of novel thermoplastic elastomers". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0004/MQ30718.pdf.
Pełny tekst źródłaKsiążki na temat "Elastomeric thermoplastic"
Mongiello, Joseph. Thermoplastic elastomers. Norwalk, CT (25 Van Zant Street, Norwalk 06855): Business Communications Co., 1989.
Znajdź pełny tekst źródłaJoseph, Mongiello, i Business Communications Co, red. Thermoplastic elastomers: New expectations. Stamford, Conn., U.S.A: Business Communications Co., 1985.
Znajdź pełny tekst źródłaEl-Sonbati, Adel Zaki. Thermoplastic elastomers. Rijeka, Croatia: InTech, 2012.
Znajdź pełny tekst źródłaGeoffrey, Holden, Quirk Randolph P, Schroeder Herman E i Legge Norman R, red. Thermoplastic elastomers. Wyd. 2. Munich: Hanser, 1996.
Znajdź pełny tekst źródłaLimited, Rapra Technology, red. New opportunities for thermoplastic elastomers: A one-day seminar. Shawbury: RAPRA Technology, 1996.
Znajdź pełny tekst źródłaWalker, Benjamin M., i Charles P. Rader, red. Handbook of Thermoplastic Elastomers. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-1671-8.
Pełny tekst źródłaM, Walker Benjamin, i Rader Charles P. 1935-, red. Handbook of thermoplastic elastomers. Wyd. 2. New York: Van Nostrand Reinhold, 1988.
Znajdź pełny tekst źródłaR, Legge N., Holden G i Schroeder H. E, red. Thermoplastic elastomers: A comprehensive review. Munich: Hanser Publishers, 1987.
Znajdź pełny tekst źródłaStoĭko, Fakirov, red. Handbook of condensation thermoplastic elastomers. Weinheim: Wiley-VCH, 2005.
Znajdź pełny tekst źródła1941-, De S. K., i Bhowmick Anil K. 1954-, red. Thermoplastic elastomers from rubber-plastic blends. New York: Ellis Horwood, 1990.
Znajdź pełny tekst źródłaCzęści książek na temat "Elastomeric thermoplastic"
Rader, Charles P. "Elastomeric Alloy Thermoplastic Vulcanizates". W Handbook of Thermoplastic Elastomers, 85–140. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-1671-8_4.
Pełny tekst źródłaAwasthi, Pratiksha, Aiswarya S i Shib Shankar Banerjee. "Thermoplastic Elastomeric Foams: Challenges, Opportunities and New Approaches". W ACS Symposium Series, 91–119. Washington, DC: American Chemical Society, 2023. http://dx.doi.org/10.1021/bk-2023-1439.ch005.
Pełny tekst źródłaAiswarya, S., Pratiksha Awasthi, Nischay Kodihalli Shivaprakash, A. Wayne Cooke, Subhan Salaeh i Shib Shankar Banerjee. "High-temperature thermoplastic elastomeric materials by electron beam treatment – Challenges and opportunities". W Radiation Technologies and Applications in Materials Science, 257–86. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003321910-10.
Pełny tekst źródłaCoran, A. Y., i R. P. Patel. "Thermoplastic elastomers based on elastomer/thermoplastic blends dynamically vulcanized". W Reactive Modifiers for Polymers, 349–94. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1449-0_9.
Pełny tekst źródłaBashford, David. "Thermoplastic Elastomers (TPE)". W Thermoplastics, 339–52. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-009-1531-2_61.
Pełny tekst źródłaGooch, Jan W. "Thermoplastic Elastomers". W Encyclopedic Dictionary of Polymers, 746. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11796.
Pełny tekst źródłaAoyagi, Takeshi. "Thermoplastic Elastomers". W Computer Simulation of Polymeric Materials, 249–67. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0815-3_16.
Pełny tekst źródłaHolden, Geoffrey. "Thermoplastic Elastomers". W Rubber Technology, 465–81. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-017-2925-3_16.
Pełny tekst źródłaRader, Charles P. "Thermoplastic Elastomers". W Rubber Technology, 264–83. München: Carl Hanser Verlag GmbH & Co. KG, 2009. http://dx.doi.org/10.3139/9783446439733.010.
Pełny tekst źródłaBruder, Ulf. "Thermoplastic Elastomers". W User's Guide to Plastic, 27–32. München: Carl Hanser Verlag GmbH & Co. KG, 2015. http://dx.doi.org/10.3139/9781569905739.004.
Pełny tekst źródłaStreszczenia konferencji na temat "Elastomeric thermoplastic"
Rodriguez, Oscar O., Arturo A. Fuentes, Constantine Tarawneh i Robert E. Jones. "Hysteresis Heating of Railroad Bearing Thermoplastic Elastomer Suspension Element". W 2017 Joint Rail Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/jrc2017-2257.
Pełny tekst źródłaMeesche, Anton Van, Robert D. Banning, Satish J. Doshi i Charles P. Rader. "Flocking of Elastomeric Alloy Thermoplastic Rubber Profiles". W International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1991. http://dx.doi.org/10.4271/910108.
Pełny tekst źródłaSundararajan, Raji, Claudio Olave, Edwin Romero i A. M. Kannan. "Impedance analysis of long term aged thermoplastic elastomeric insulators". W 2007 Annual Report - Conference on Electrical Insulation and Dielectric Phenomena. IEEE, 2007. http://dx.doi.org/10.1109/ceidp.2007.4451626.
Pełny tekst źródłaPowell, Bernard. "Silicone Elastomeric Adhesives for the Thermoplastic Automotive Bumper Systems". W International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1990. http://dx.doi.org/10.4271/900771.
Pełny tekst źródłaDev, Bodhayan, Jifeng Wang, Om P. Samudrala i Qi Xuele. "Characterization of thermoplastic-elastomeric seals at high pressures and temperatures". W 52nd AIAA/SAE/ASEE Joint Propulsion Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2016. http://dx.doi.org/10.2514/6.2016-4922.
Pełny tekst źródłaChen, Chien-Fu, Jikun Liu, Chien-Cheng Chang i Don L. DeVoe. "High Pressure On-Chip Valves for Thermoplastic Microfluidics". W ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-11760.
Pełny tekst źródłaRizvi, Reza, Hani Naguib i Elaine Biddiss. "Characterization of a Porous Multifunctional Nanocomposite for Pressure Sensing". W ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/smasis2012-8178.
Pełny tekst źródłaAmin, Salman, Muhammad Amin i Raji Sundrarajan. "Comparative Multi Stress Aging of Thermoplastic Elastomeric and Silicone Rubber Insulators in Pakistan". W 2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE, 2008. http://dx.doi.org/10.1109/ceidp.2008.4772914.
Pełny tekst źródłaVargantwar, Pruthesh H., Tushar K. Ghosh i Richard J. Spontak. "Novel thermoplastic elastomeric gels as high-performance actuators with no mechanical pre-strain". W SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, redaktorzy Yoseph Bar-Cohen i Thomas Wallmersperger. SPIE, 2009. http://dx.doi.org/10.1117/12.816060.
Pełny tekst źródłaSaha, Subhabrata, i Anil k. Bhowmick. "Understanding Polyvinylidene Fluoride based Thermoplastic Elastomeric Blends: A Combined Simulation and Experimental Study". W 200th Fall Technical Meeting of the Rubber Division, American Chemical Society 2021. Akron, Ohio, USA: Rubber Division, American Chemical Society, 2021. http://dx.doi.org/10.52202/064426-0039.
Pełny tekst źródłaRaporty organizacyjne na temat "Elastomeric thermoplastic"
Fletcher, R. W., i H. W. Cheung. Energetic Thermoplastic Elastomer Synthesis. Fort Belvoir, VA: Defense Technical Information Center, styczeń 1989. http://dx.doi.org/10.21236/ada203594.
Pełny tekst źródłaManser, G. E., i R. W. Fletcher. Energetic Thermoplastic Elastomer Synthesis. Fort Belvoir, VA: Defense Technical Information Center, kwiecień 1988. http://dx.doi.org/10.21236/ada196885.
Pełny tekst źródłaChien, James C. Thermoplastic Elastomer LOVA Binders. Fort Belvoir, VA: Defense Technical Information Center, maj 1991. http://dx.doi.org/10.21236/ada236586.
Pełny tekst źródłaSalazar, Laura Ann. Functionalized Materials From Elastomers to High Performance Thermoplastics. Office of Scientific and Technical Information (OSTI), styczeń 2003. http://dx.doi.org/10.2172/815764.
Pełny tekst źródłaStephens, Thomas. Solventless Manufacture of Artillery Propellant Using Thermoplastic Elastomer Binder, PP-867. Fort Belvoir, VA: Defense Technical Information Center, styczeń 1999. http://dx.doi.org/10.21236/ada379638.
Pełny tekst źródła