Gotowe bibliografie tematyczne / DTU PV POWER PLANT

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji

Gotowa bibliografia na temat „DTU PV POWER PLANT”

Autor: Grafiati

Data publikacji: 11 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „DTU PV POWER PLANT”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "DTU PV POWER PLANT"

Abdul Kadir, Aida Fazliana, Hanisah Mupangat, Dalila Mat Said i Zulhani Rasin. "REACTIVE POWER ANALYSIS AT SOLAR POWER PLANT". Jurnal Teknologi 83, nr 2 (2.02.2021): 47–55. http://dx.doi.org/10.11113/jurnalteknologi.v83.15104.

Pełny tekst źródła

Streszczenie:

Reactive power is essential to control the power system's voltage stability as the reactive power is directly proportional to the voltage. Hence, every new solar photovoltaic (PV) plant installed in the grid system must comply with the grid code requirements to ensure that the electricity supply remains stable and reliable. As the more penetration of PV plants, the electrical system will face some challenges related to reactive power control and voltage support. Thus, many countries including Malaysia have updated their grid codes to permit a smooth interaction between these new plants with the grid system. The inverter of PV solar connected to grid system are required to supply rated power output (MW) at point of common coupling (PCC) between the limits of 0.85 power factor lagging, and 0.95 leading follow to the Malaysian Grid Code (MGC) requirement. Hence, this research aims to design a controller for the PV inverter in Matlab/Simulink that able to absorb and supply the reactive power. Then, the comparison will execute between the simulation results and the MGC requirement. However, due to power loss in the system, the PV inverter controller may not comply with the reactive power capability as the MGC requirement. Thus, the PV system need to integrate with the capacitor bank as a reactive power compensator.

Style APA, Harvard, Vancouver, ISO itp.

Chen, Nuofu, Xiulan Zhang, Yiming Bai i Han Zhang. "Environmental Friendly PV Power Plant". Energy Procedia 16 (2012): 32–37. http://dx.doi.org/10.1016/j.egypro.2012.01.007.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Pelin, Denis, Matej Žnidarec, Damir Šljivac i Andrej Brandis. "Fast Power Emulation Approach to the Operation of Photovoltaic Power Plants Made of Different Module Technologies". Energies 13, nr 22 (15.11.2020): 5957. http://dx.doi.org/10.3390/en13225957.

Pełny tekst źródła

Streszczenie:

This paper gives a comprehensive approach to the emulation of photovoltaic (PV) plants made of different module technologies as well as varying peak power through the advanced fast PV power emulation technique. Even though PVs are recognized as a technology for CO2 emissions mitigation, the proposed emulation technique provides the opportunity to replicate PV plant operation without a carbon footprint because of its working principle. The process of PV power plant emulation consists of several stages which are described in detail. An algorithm for determining PV power plant configuration based on the technical characteristics of the PV emulation system equipment is developed and presented, as well as an algorithm for preparing data on the current–voltage (i–v) characteristics used as input data into programmable sources that mimic the power plant PV array. A case study of a single day operation of PV power plants made of two different topologies and technologies was carried out with the fast PV power emulation approach and the results are evaluated and presented.

Style APA, Harvard, Vancouver, ISO itp.

Jing, Shi, Wang Zhimin, Huang Zhonghua i Qi Yanshou. "Analysis of harmonic resonance mechanism of PV power plant". E3S Web of Conferences 107 (2019): 02002. http://dx.doi.org/10.1051/e3sconf/201910702002.

Pełny tekst źródła

Streszczenie:

Great amount of PV inverters connected with the PV power plant causes the power system to become electronically power and affects the operation mode of the traditional power system. High-frequency switching characteristics of PV inverters carry a large number of harmonic components, even lead to the harmonic resonance of a multi-machine parallel system. In the paper, based on physical mechanism of power electronics, a high-order model of harmonic impedance of a typical PV power plant is established, and harmonic resonance mechanism in parallel operation of PV power plant is analyzed, as well as key factors.

Style APA, Harvard, Vancouver, ISO itp.

Liang, Hai Feng, Hai Hong Wang i Zi Xing Liu. "Study on the Output Power of the PV Power Plant Model Based on ANFIS". Advanced Materials Research 724-725 (sierpień 2013): 190–94. http://dx.doi.org/10.4028/www.scientific.net/amr.724-725.190.

Pełny tekst źródła

Streszczenie:

in order to study the output power of PV plant in depth, effective and reasonable methods of modeling for PV power plant are explored and adaptive neuro-fuzzy inference system (ANFIS) based on Takagi-Sugeno (TS) model is proposed in this paper. According to the power output characteristics of PV system and a variety of factors which impact, three kinds of model of PV plant power output are established based on subtractive clustering ANFIS. After model test and calculation for confidence interval estimate of power output, the results show that the accuracy of the model is able to meet the practical engineering application requirements and the second model is optimal by comparison. In conclusion, ANFIS provides an innovative and feasible model establishment method for the power output of PV plant.

Style APA, Harvard, Vancouver, ISO itp.

Alhmoud, Lina. "Why Does the PV Solar Power Plant Operate Ineffectively?" Energies 16, nr 10 (13.05.2023): 4074. http://dx.doi.org/10.3390/en16104074.

Pełny tekst źródła

Streszczenie:

Quality, reliability, and durability are the key features of photovoltaic (PV) solar system design, production, and operation. They are considered when manufacturing every cell and designing the entire system. Achieving these key features ensures that the PV solar system performs satisfactorily and offers years of trouble-free operation, even in adverse conditions. In each cell, the quality of the raw material should meet the quality standards. The fulfillment of the quality management system requires every part that goes into the PV solar system to undergo extensive testing in laboratories and environments to ensure it meets expectations. Hence, every MWh of electricity generated by the PV solar system is counted, the losses should be examined, and the PV system’s returns should be maximized. There are many types of losses in the PV solar system; these losses are identified and quantified based on knowledge and experience. They can be classified into two major blocks: optical and electrical losses. The optical losses include, but are not limited to, partial shading losses, far shading losses, near shading losses, incident angle modifier (IAM) losses, soiling losses, potential induced degradation (PID) losses, temperature losses, light-induced degradation (LID) losses, PV yearly degradation losses, array mismatch losses, and module quality losses. In addition, there are cable losses inside the PV solar power system, inverter losses, transformer losses, and transmission line losses. Thus, this work reviews the losses in the PV solar system in general and the 103 MWp grid-tied Al Quweira PV power plant/Aqaba, mainly using PVsyst software. The annual performance ratio (PR) is 79.5%, and the efficiency (η) under standard test conditions (STC) is 16.49%. The normalized production is 4.64 kWh/kWp/day, the array loss is 1.69 kWh/kWp/day, and the system loss is 0.18 kWh/kWp/day. Understanding factors that impact the PV system production losses is the key to obtaining an accurate production estimation. It enhances the annual energy and yield generated from the power plant. This review benefits investors, energy professionals, manufacturers, installers, and project developers by allowing them to maximize energy generation from PV solar systems and increase the number of solar irradiation incidents on PV modules.

Style APA, Harvard, Vancouver, ISO itp.

Delfanti, Maurizio, Davide Falabretti i Marco Merlo. "Energy storage for PV power plant dispatching". Renewable Energy 80 (sierpień 2015): 61–72. http://dx.doi.org/10.1016/j.renene.2015.01.047.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Venkatesh, V., D. Vamsi Krishna, K. V. Kalyani i Ashutosh Saxena. "ADVANCED APPROACH IN SOLAR PV PLANT PROTECTION SYSTEM". International Journal of Engineering Applied Sciences and Technology 6, nr 10 (1.02.2022): 295–99. http://dx.doi.org/10.33564/ijeast.2022.v06i10.039.

Pełny tekst źródła

Streszczenie:

Solar Photovoltaic (PV) technology has become one of the most promising and reliable source of renewable energy. The favorable conditions like decreasing prices of PV system, increased panel size and enhanced efficiency improved the solar PV power plants installations. PV Panel and Inverter are vital equipment’s in functioning of solar PV system. As the solar power plant has various power electronics and other electrical components, there might be chance for power interruptions due to improper functioning of switch gear. Ensuring protection measures of the solar power plant plays a key role in smooth functioning of the system. The main objective of the paper is to explain various protection issues faced in solar roof top system and the necessary measures taken for resolving the issues with root cause analysis. This technical paper also showcases various preventive maintenance activities followed in the solar PV plant

Style APA, Harvard, Vancouver, ISO itp.

Vaskov, A. G., N. Y. Mozder i A. F. Narynbaev. "Modelling of Solar-Diesel Hybrid Power Plant". IOP Conference Series: Materials Science and Engineering 1211, nr 1 (1.01.2022): 012011. http://dx.doi.org/10.1088/1757-899x/1211/1/012011.

Pełny tekst źródła

Streszczenie:

Abstract The article highlights the problems of distributed energy generation and focuses on solar-diesel hybrid power plant modelling and optimization. Designing power systems based on renewable energy sources includes a very relevant task of building mathematical models of such systems and their elements. The article presents an approach and definition of mathematical models describing photovoltaic-diesel (PV-D) hybrid power system elements used in decision making processes as a part of PV-D operation control. An overview of PV module output power, performance and temperature models is given. Along with the analysis of the specific fuel consumption dependencies on the operating power of the diesel generator, an example of diesel power plant unit commitment is shown.

Style APA, Harvard, Vancouver, ISO itp.

Haji, AHMED, i Mehdi F. Bonneya. "Assessment of Power Quality for Large Scale Utility Grid-Connected Solar Power Plant Integrated System". Journal of Techniques 3, nr 3 (29.09.2021): 20–30. http://dx.doi.org/10.51173/jt.v3i3.336.

Pełny tekst źródła

Streszczenie:

This paper introduces the simulation and analysis of a three-phase large-scale grid-connected solar Photovoltaic (PV) system in order to assess the effect of integrated PV grid-connected mode on the power quality of the utility grid. The study takes into account the effect of solar system power variation as well as the PV inverter's introduction of penetrating harmonics into the system. The simulation of the system is done in MATLAB software using the SIMULINK environment and is tested by the Pysyst program. Where it is done in real-time with an actual case study on a 1620-kW PV array connected to an 11-kV grid via a three-level Voltage Source Converter (VSC). The technical data was recorded, and the system's power quality was examined. The grid-connected PV system's Performance Ratio (PR) is assessed to determine the PV system's reliability and grid connectivity.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "DTU PV POWER PLANT"

Perez, de Larraya Espinosa Mikel. "Photovoltaic Power Plant Aging". Thesis, Högskolan i Gävle, Avdelningen för byggnadsteknik, energisystem och miljövetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-33252.

Pełny tekst źródła

Streszczenie:

One of the most pressing problems nowadays is climate change and global warming. As it name indicates, it is a problem that concerns the whole earth. There is no doubt that the main cause for this to happen is human, and very related to non-renewable carbon-based energy resources. However, technology has evolved, and some alternatives have appeared in the energy conversion sector. Nevertheless, they are relatively young yet. Since the growth in renewable energies technologies wind power and PV are the ones that have taken the lead. Wind power is a relatively mature technology and even if it still has challenges to overcome the horizon is clear. However, in the PV case the technology is more recent. Even if it is true that PV modules have been used in space applications for more than 60 years, large scale production has not begun until last 10 years. This leaves the uncertainty of how will PV plants and modules age. The author will try to analyse the aging of a specific 63 kWp PV plant located in the roof of a building in Gävle, monitoring production and ambient condition data, to estimate the degradation and the new nominal power of the plant. It has been found out that the degradation of the system is not considerable. PV modules and solar inverters were studied, and even if there are more elements in the system, those are the principal ones. PV modules suffered a degradation of less than 5%, while solar inverters’ efficiency dropped from 95,4% to around 93%.

Style APA, Harvard, Vancouver, ISO itp.

Prévost, Chloé. "Hybrid PV-Biomass Power Plant design for an Indonesian village". Thesis, KTH, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-232474.

Pełny tekst źródła

Streszczenie:

This thesis work focuses on the design of a hybrid PV-Gasification-Battery plant for a remote villagelocated on an Indonesian island and currently not electrified. As the objective of the study is to assess therelevance of the hybrid plant to make use of the local resources to satisfy the demand, the village situationis analyzed, and a representative load curve is built. The consumption of the whole village whose 3000households mainly live from fishing is assumed to reach 13.3 MWh/day by the plant year 10, peaking at920 kW at 6 pm. The local situation study raises important issues such as deforestation, lack of drinkablewater and food conservation solutions. This project not only intends to bring electricity access but adoptsan integrated and innovative approach to best serve the local needs and address the above-mentionedissues. This is why virtuous practices such as polygeneration with cooling, ice and clean water productionor load shaving are embraced. To determine its optimal sizing and behavior, a modelling of the plant isdeveloped, with a specific focus on the gasification plant operation and technical limits, and simulationsare carried out. The scenario in which the gasification plant runs at half load during the day while all thephotovoltaic power available is injected proves to be the best one as it engenders a smooth power curvewith a limited peak and a balanced ratio biomass/solar in energy. As for the optimal sizing, it is found tohave respective PV, gasification and storage capacities of 1600 kWpeak, 450 kW and 1274 kWh. It isdefined as optimal with regards to its performance on the three main criteria, introduced to make sure thataffordability, reliability and environmental sustainability remain at the core of the project. Indeed, theLevelized Cost of Energy (LCOE) is the lowest of all simulations and remains in the range of tariffsevoked by the Indonesian energy distributor PLN for Power Purchase Agreements in off-grid areas with141$/MWh, the 5%-minimum criterion is met for the share of blackout and the plantation size remainsreasonable with less than 50 hectares required. This configuration is finally compared to other hybridsolutions, both the association of PV and batteries and the PV-genset-storage solution boast higherLCOE with 286 and 157$/MWh respectively.
Denna magisteruppsats undersöker en konstruktion av ett kraftverk för en by i Indonesien som förnärvarande saknar elförsörjning. Konstruktionen görs med hjälp av fotovoltaik-förgasnings-batterier.Syftet med studien är att bedöma hybridkraftverks förmåga att utnyttja lokala naturresurser och om de ärkapabla att tillgodose byns behov. Därför analyseras byns situation och presenteras med en representativbelastningskurva. Förbrukningen av hela byn, det vill säga 3000 hushåll som försörjer sig huvudsakligenvia fiske, uppskattas till 13,3 MWh/dag för kraftverks år 10. En lokal undersökning tydliggör trehuvudproblem: avskogning, brist på drickbart vatten och brist på möjlighet att förvara mat. Projektetsyftar inte bara till att ge tillgång till el utan också till att tillgodose andra lokala behov. Därför används ettintegrerat och innovativt tillvägagångssätt: kylning, is och dricksvatten produceras; belastningsutjämningtillämpas. En modell utvecklas för att bestämma optimal dimensionering som fokuserar påförgasningskraftverkets drift och tekniska begränsningar. Därutöver utförs simuleringar. Bästa scenariouppstår när förgasningskraftverket körs vid halv belastning under dagen medan all tillgänglig solkraftutnyttjas, eftersom kraftproduktionen är jämn och peaken under dagen är begränsad samtenergiförbrukningen av sol/biomassa är balanserad. Den optimala konfigurationen är för respektive PV-,förgasnings- och batteris kapaciteter 1600 kWpeak, 450 kW och 1274 kWh. Det definieras som optimaltbaserat på tre huvudkriterier som bedömer kraftverkets överkomlighet, tillförlitlighet och miljöhållbarhet.LCOE (Levelized Cost of Energy) visar att det är det billigaste jämfört med de andra simuleringarna på141 $/MWh. Andelen blackout uppfyller 5 %-målet och plantagen har en rimlig storlek under 50 hektar.Slutligen jämförs den optimala konfigurationen med andra hybridkraftverk som båda är dyrare: PVbatterikraftverkmed en LCOE på 286$/MWh och PV-genset-batterikraftverk med en LCOE på157$/MWh.

Style APA, Harvard, Vancouver, ISO itp.

Alsulaiman, Mohamad, i Najmeh Mohammadi. "Optimal Pitch Distance and Tilt Angleof PV Power Plant for Different Climate". Thesis, Högskolan Dalarna, Energiteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:du-35528.

Pełny tekst źródła

Streszczenie:

Finding the optimum inter-row spacing and installation tilt for tilted or ground mounted PV systems is a big issue in designing the large-scale PV systems. Increasing the array spacing leads to higher annual generated energy because of the reduced impact of row-shading, but on the other hand, it increases costs of land purchase/lease and wiring costs. Many compromises between performance and cost should be done to design an optimum large-scaled solar plant. One of the criteria in designing of solar power plants is reducing of LCOE, which reflects the cost of every unit of generated energy. Site locations have large impacts on the optimal design of pitch distance and title angles, but such impacts have not been studied extensively in the existing studies, so it is going to bridge this research gap in this thesis. The main purpose of this research is to investigate the impact of climate conditions on the pitch distance and tilt angle for large-scale PV plant and finding the optimal pitch distance and tilt according to the least cost of production. The impact of climate and meteorological data on the self-shading loss and yield of energy are investigated through a simulation tool, which is PVsyst software here, in different tilt angles and distances between rows. The different climates can be considered by choosing site locations in different latitudes to cover all climate zones. Six cities in temperate climate, three cities in tropic climate and one city in polar climate have been selected. LCOE minimizing is a measure in finding the optimum tilt and pitch distance for a 1 MW solar system installed in different latitudes. In this study the type, size and cost of components have been assumed constant in different climate conditions. There is a wide range of variability in some economic indicators like interest rate and discount rate as well as the cost of land in different climates or even countries in the same climate; then to highlight the impacts of climate conditions on the optimal tilt and pitch distance, these parameters were assumed to be constant in this study. The results show the optimal tilt of angles increases with getting far of equator in a range between 0° and 40° to capture more direct sunlight, and the optimal raw spacing grows in further locations to equator in a range between 4 m to 11 m to reduce self- shading loss. Moreover, the best module configuration for PV arrays (portrait or landscape) can be different in different climates.

Style APA, Harvard, Vancouver, ISO itp.

Mthwecu, Sabatha. "Modelling and macroeconomic analysis of a Solar PV/diesel hybrid power plant". Master's thesis, University of Cape Town, 2015. http://hdl.handle.net/11427/13729.

Pełny tekst źródła

Streszczenie:

This research thesis covers the latest research on renewable energy globally and focuses on the solar panel and biofuels market. A full macroeconomic analysis is done on the Chinese Taipei, and this results in some parameters which then become the basis of this research. The macroeconomic parameters are then put into a tabular form and applied to India, Turkey and Australia to see how much weight the analysis can hold and if there is enough data per country on the macroeconomic parameters chosen. This research thesis conducts a shorter, custom version of a macroeconomic analysis on a South African area, and considers the national Gross Domestic Product, pollution, length of transmission lines, weather factors such as sunlight and temperature and more. Following from this, a hybrid power system is developed under these circumstances and the information is compared with past research. A very informative discussion is then had as to what the model means on a macroeconomic scale and how it performs technically. The technical solution at this point has no economic barriers. Economics can be a tool and not a financial hurdle in the face of technological advancement.

Style APA, Harvard, Vancouver, ISO itp.

Kroutil, Roman. "Komplexní provozní diagnostika FVE-T14 - opatření pro optimalizaci provozu". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-242083.

Pełny tekst źródła

Streszczenie:

The aim of the Thesis is theoretical clarification of the issues of photovoltaic power plants, their diagnostics, inspection and performance measurement, including negative impacts on their operation and subsequent application of theoretical knowledge during practical inspection and diagnostics of PV power plants. In its introductory part, the Thesis deals with design, manufacturing and development of PV cells and panels and describes other necessary elements and components, including their use in individual types of photovoltaic systems. Another part describes electric parameters of PV cells and panels, especially the parameters that can be found out by measurement of V-A characteristics and also the parameters affecting the shape of the V-A characteristics. The third part is focused on failures of photovoltaic systems, which include various defects of photovoltaic cells and panels, it also provides for adverse factors affecting operation of the entire system, associated not only with weather influences but also with the actual design of the photovoltaic system. The fourth part deals with possibilities of increasing the cost-effectiveness of electricity generation by PV power plants on the basis of practical experience of their operators. The subsequent part determines, on the basis of technical standards, procedures for PV power plant inspections, the procedures for measurement and diagnostics of PV power plants and also other prerequisites connected with inspections and measurements. This part includes also a description of requirements for measuring devices, most frequent measurement errors, adverse impacts affecting measurements and methods of assessment of the data measured. The last part of the Thesis is practical. At first it deals with verification of the impact of defects of PV modules on the shape of their V-A characteristics, then with execution of inspections and diagnostics of a particular PV power plant, evaluation of the data identified and measured, as well as with a proposal of optimisation measures to increase cost-efficiency of the operation of that particular PV power plant.

Style APA, Harvard, Vancouver, ISO itp.

Compadre, Senar David. "Performance evaluation of a rooftop solar photovoltaic power plant in the Gävle Arenaby (Gävle, Sweden): Installation testing". Thesis, Högskolan i Gävle, Energisystem, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-26931.

Pełny tekst źródła

Streszczenie:

The current energy situation is taking a turn towards renewable energies, due to the new pacts to curb global warming. These agreements, together with governmental aid, are facilitating an escalation in the production and improvement of new energy systems and the price decrease due to a larger-scale production. Within these energy alternatives, solar energy is found, specifically the subject to be treated in this project is photovoltaic energy, due to its exponential growth in the last 10 years, new tools are being developed for its monitoring and modelling. Therefore, the main objective of this thesis is to develop a method for installation testing of a PV-system. The method should give the installed nominal power of the system and show if the maximum power point trackers work as expected. A large PV-system was installed on the roof of Gävle Arenaby during 2017. A measurement system for monitoring of the power of the system and of the solar irradiance was installed. Different parameters have been taken into account for the adjustment of the model that vary the performance of the system. These factors are: the irradiance received, the module temperature and the angle of incidence. It has been concluded that the results obtained indicate a correct adjustment of the theoretical power against the real power, which means, a correct operation of the generated model. Besides, the expected power follows a linear trend, reaching the power set by the manufacturer for Standard Test Conditions. The results show that the monitored modules-strings fulffill the promised performance and the method for installation testing work as expected. The linear correlation between corrected power and irradiance means that the maximum power point tracker in the inverter works independent of the power.

Style APA, Harvard, Vancouver, ISO itp.

Zeman, Daniel. "Návrh technického provedení FVE včetně systému řízení pro komerční objekt v souladu s platnými pravidly pro program ÚSPORY ENERGIE - FVE". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377121.

Pełny tekst źródła

Streszczenie:

Main purpose of the thesis is to create proposal of the photovoltaic hybrid system for commercial building in accordance with applicable rules for energy savings program. The introductory part of the thesis describes the rules regarding the photovoltaic system parts. The next part of the thesis describes the available technical solution for realization of the photovoltaic system design and the possibilities of electric energy accumulation in these systems and how to deal with power overflows using the power flow controller and what is the negative impacts on the distribution network when switching the connected load. In the next part the design of the PV system is carried out according to the valid assumptions described in the theoretical part of the thesis. Verification of power flow controller and measurement results in UEEN laboratories. The last part of the thesis is an evaluation of the economic part of the proposed system.

Style APA, Harvard, Vancouver, ISO itp.

Bartel, Kyle. "Allocating Optimal Grid-Connected Solar Photovoltaic Power Plant Sites : GIS-Based Multi-Criteria Modeling of Solar PV Site Selection in the Southern Thompson-Okanagan Region, British Columbia, Canada". Thesis, Högskolan i Gävle, Akademin för teknik och miljö, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-15859.

Pełny tekst źródła

Streszczenie:

Fossil fuels and non-renewable resources are being replaced with, as modern day society has coined the term, green energy. This movement towards green energy creates a demand for renewable energy resources, such as solar photovoltaic (PV) systems. This study used Geographic Information Systems (GIS) in conjunction with Remote Sensing (RS) practices and two weighting systems the Analytical Hierarchy Process (AHP) and Rank-Order methods for PV site selection. Six multi-criteria models were developed using spatial factors and constraining images to locate potential photovoltaic power plant sites for three settings of fixed axis PV arrays. This analysis was performed at a macro regional scale and further analysis is encouraged for micro site selection.

Style APA, Harvard, Vancouver, ISO itp.

Silva, Vinícius Oliveira da. "Estudo e modelagem da arquitetura modular de uma usina solar fotovoltaica arrefecida com protótipo de verificação". Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/3/3143/tde-22072016-163255/.

Pełny tekst źródła

Streszczenie:

O objetivo deste trabalho é modelar a arquitetura de uma usina solar fotovoltaica arrefecida intitulada UFVa, utilizando um protótipo de verificação. A metodologia se baseia na medição, verificação e análise dos dados de temperatura e produção de energia elétrica dos strings de teste (arrefecido) e comparação (não arrefecido), estudo do comportamento da alimentação de água do sistema de arrefecimento e o impacto das condições climáticas na operação do protótipo de UFVa. Por meio das análises dos dados constatou-se que, para o período entre as 09h00min e as 17h30min, os módulos PV do string de teste sempre operam com temperaturas inferiores aos módulos PV do string de comparação. Durante o período de testes, no qual a temperatura dos módulos PV do string de comparação operou acima de 55,0°C, as temperaturas médias e máximas registradas nos módulos PV do string de teste foram inferiores a 37,0 °C, operando sempre abaixo da temperatura nominal de operação da célula (NOCT). A produção de energia elétrica no string de teste superou a do string de comparação em 3,0kWh/dia. Portanto, o sistema de arrefecimento reduz a temperatura de operação dos módulos PV, principalmente no período de máxima geração elétrica, que corresponde ao período das 11h00min às 15h00min, proporcionando ganhos médios de rendimento de 5,9% na produção de energia, 10,3% na potência e 5,4% no FC.
In this work we use a verification prototype to model the architecture of a solar photovoltaic power plant equipped with a cooling system. The power plant we model is called UFVa. The methodology is based on the measurement, verification, and data analysis of temperature, electricity generation, test strings (cooled) and comparison strings (not cooled), along with a study of the water feeding behavior of the cooling system, and the impact of climatic conditions in the UFVa prototype operation. By analyzing the data we observed that, for the period between 09:00am and 5:30pm, the PV modules of the test string operate at temperatures below those of the PV modules of the comparison string. During the tests, in which the temperature of the PV modules of the comparison string operated above 55.0°C, the average and the maximum temperatures recorded in the PV modules of the testing string lied below 37.0°C, operating below the NOCT. Regarding the generation of electricity, the test string generated 3.0 kWh/day more than the comparison string. Hence, the cooling system decreases the operating temperature of the PV modules, particularly during the maximum power generation period which is from 11am to 3pm. This leads to efficiency average gains of up to 5.9% in the generation of electricity, 10.3% in the power, and 5.3% in the PR and PF.

Style APA, Harvard, Vancouver, ISO itp.

Petrov, Roman. "Vývoj komplexního simulátoru slunečního záření a jeho spolupráce s FV modulem". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377099.

Pełny tekst źródła

Streszczenie:

The main point of this thesis is the extension of the complex solar radiation simulator, the creation of new functionalities, and the cooperation of this complex simulator with the PV power plant. This work builds on the work done in the area of solar radiation modeling. The thesis deals with the continuation, or improvement of some shortcomings, removing shortcomings, such as fixing the beginnings and ends of the simulation, correcting the calculation of sunrise and sunset, but also adding different types of clouds, combinations of different preset cloud situations, or data input, and more. These deficiencies are found in the bachelor's thesis "Complex Simulator of the solar irradiance", and PSCAD is the main tool in this work. Another important point of this work is the realization of the simulation where an improved solar radiation simulator works in cooperation with a model of a photovoltaic panel or a PV power plant, respectively. It has different operating states created in PSCAD. These include, for example, cloud crossings, both over the entire power plant and only partial. In addition, there are experiments that prove the fact that the direction of the incoming cloud plays a role in the power of the PV power plant.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "DTU PV POWER PLANT"

RIZVI, Sahnawaz, i Samsam MALLICK. METHOD STATEMENT and RISK ASSESSMENT for MODULE INTERCONNECTION WORKS in PV SOLAR POWER PLANT. Independently Published, 2018.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "DTU PV POWER PLANT"

Ghosal, Manoj Kumar. "Decentralized Rooftop Solar Photovoltaic (PV) Power Plant". W Entrepreneurship in Renewable Energy Technologies, 143–94. London: CRC Press, 2022. http://dx.doi.org/10.4324/9781003347316-3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chianese, D., M. Camani, P. Ceppi i D. Iacobucci. "TISO: 4 kW Experimental Amorphous Silicon PV Power Plant". W Tenth E.C. Photovoltaic Solar Energy Conference, 755–58. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3622-8_194.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bhattacharjee, Subhadeep, i Anindita Dey. "Economic Analysis of a Biomass/PV/Diesel Autonomous Power Plant". W Eco-friendly Computing and Communication Systems, 62–68. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-32112-2_8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kadri, Sani Moussa, Brayima Dakyo, Mamadou Baïlo Camara i Yrébégnan Moussa Soro. "Behavioural Modelling of Multi-MW Hybrid PV/Diesel Modular Power Plant". W Lecture Notes in Electrical Engineering, 321–34. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-24837-5_24.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Aji, Prasetyo, Kazumasa Wakamori i Hiroshi Mineno. "Short-Term Solar Power Forecasting Using SVR on Hybrid PV Power Plant in Indonesia". W Advances in Intelligent Networking and Collaborative Systems, 235–46. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-29035-1_23.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Laukamp, H., P. Braun i S. Ayyash. "Experiences with a PV Power Plant for a Remote Greenhouse Cooling System". W Tenth E.C. Photovoltaic Solar Energy Conference, 858–61. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3622-8_219.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

He, Hui, Ran Hu, Ying Zhang, Runhai Jiao i Honglu Zhu. "Hourly Day-Ahead Power Forecasting for PV Plant Based on Bidirectional LSTM". W High-Performance Computing Applications in Numerical Simulation and Edge Computing, 208–22. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9987-0_18.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bono, Andrea, i Martino Marini. "Renewable power sources in coastal areas. A viability assessment in the scope of needs and regulations". W Proceedings e report, 645–55. Florence: Firenze University Press, 2020. http://dx.doi.org/10.36253/978-88-5518-147-1.64.

Pełny tekst źródła

Streszczenie:

The work deals with renewable energy project, in the context of the deregulated energy market. Special attention is focused on renewables and on the situation in Italy from the standards point of view. The set up of a wind farm and a PV plant in coastal Sardinian area for both electricity and desalinated water production is studied. The convenience of fuelling desalination plants through renewables is investigated by taking into account additional on-side trading instruments. A model to simulate the operation wind and PV systems is applied both to calculate the produced energy and to assess the performance of a desalination plant, namely a reverse osmosis plant driven with PV and wind sources that works in a small island site.

Style APA, Harvard, Vancouver, ISO itp.

Sławomir, Kurpaska, Knaga Jarosław, Bernacik Robert i Nęcka Krzysztof. "Modelling of PV Power Station Exploitation Process, Supporting Wastewater Treatment Plant Energetic System". W Springer Proceedings in Energy, 529–39. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72371-6_52.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rana, T. K., i S. Chakraborty. "Micro-grid for Village Empowerment Using Solar PV-Operated Micro-hydel Power Plant". W Lecture Notes in Electrical Engineering, 191–202. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4286-7_19.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "DTU PV POWER PLANT"

Jasinski, Michal, Zbigniew Leonowicz, Arsalan Najafi, Tomasz Sikorski i Jaroslaw Szymanda. "Power quality assessment of PV power plant". W 2021 IEEE International Conference on Environment and Electrical Engineering and 2021 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). IEEE, 2021. http://dx.doi.org/10.1109/eeeic/icpseurope51590.2021.9584734.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kapros, Z. "The Reference PV Power Plant-Based Method". W ISES Solar World Congress 2015. Freiburg, Germany: International Solar Energy Society, 2016. http://dx.doi.org/10.18086/swc.2015.05.25.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Moaveni, Houtan, David K. Click, Richard H. Meeker, Robert M. Reedy i Anthony Pappalardo. "Quantifying solar power variability for a large central PV plant and small distributed PV plant". W 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC). IEEE, 2013. http://dx.doi.org/10.1109/pvsc.2013.6744303.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Clark, K., R. A. Walling i N. W. Miller. "Solar photovoltaic (PV) plant models in PSLF". W 2011 IEEE Power & Energy Society General Meeting. IEEE, 2011. http://dx.doi.org/10.1109/pes.2011.6039117.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Carvajal, Javier López, Jose M. Barea, Jose Barragan i Carlos Ortega. "PV integration into a CSP plant". W SOLARPACES 2016: International Conference on Concentrating Solar Power and Chemical Energy Systems. Author(s), 2017. http://dx.doi.org/10.1063/1.4984482.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Dolara, A., R. Faranda, S. Leva, M. Mussetta i E. Ogliari. "The optimum PV plant of an inverter". W 2013 International Conference on Clean Electrical Power (ICCEP). IEEE, 2013. http://dx.doi.org/10.1109/iccep.2013.6586966.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gostein, Michael, Bodo Littmann, J. Riley Caron i Lawrence Dunn. "Comparing PV power plant soiling measurements extracted from PV module irradiance and power measurements". W 2013 IEEE 39th Photovoltaic Specialists Conference (PVSC). IEEE, 2013. http://dx.doi.org/10.1109/pvsc.2013.6745094.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sanchez, Borja Cortes, Michal Vary, Milan Perny, Frantisek Janicek, Vladimir Saly i Juraj Packa. "Prediction and production of small PV power plant". W 2017 18th International Scientific Conference on Electric Power Engineering (EPE). IEEE, 2017. http://dx.doi.org/10.1109/epe.2017.7967276.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Remon, Daniel, Antoni M. Cantarellas, Mohamed Atef Abbas Elsaharty, Cosmin Koch-Ciobotaru i Pedro Rodriguez. "Equivalent model of a synchronous PV power plant". W 2015 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2015. http://dx.doi.org/10.1109/ecce.2015.7309668.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Begum, Shahida, Reshma Banu, G. F. Ali Ahammed, B. D. Parameshachari i Rajashekarappa. "Performance degradation issues of PV solar power plant". W 2017 International Conference on Electrical, Electronics, Communication, Computer, and Optimization Techniques (ICEECCOT). IEEE, 2017. http://dx.doi.org/10.1109/iceeccot.2017.8284518.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!