Gotowa bibliografia na temat „Diamond”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Diamond”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Diamond"
Lin, Guan Fu, Ming Yi Tsai i Chiu Yuan Chen. "Development of a Combined Diamond Impregnated Lapping Plate". Key Engineering Materials 739 (czerwiec 2017): 157–63. http://dx.doi.org/10.4028/www.scientific.net/kem.739.157.
Pełny tekst źródłaMuhammad Basysyar, Fadhil, i Gifthera Dwilestari. "COMPARISON OF MACHINE LEARNING ALGORITHMS FOR PREDICTING DIAMOND PRICES BASED ON EXPLORATORY DATA ANALYSIS". International Journal of Engineering Applied Sciences and Technology 7, nr 5 (1.09.2022): 71–79. http://dx.doi.org/10.33564/ijeast.2022.v07i05.012.
Pełny tekst źródłaLiu, Fu-Kang, Ying Guo, Bei Zhao i Xiang Li. "The Color Origin and Evaluation of Natural Colored Diamonds". Science of Advanced Materials 14, nr 2 (1.02.2022): 243–56. http://dx.doi.org/10.1166/sam.2022.4210.
Pełny tekst źródłaXu, Jingru. "Prediction on the Prices of Laboratory-Grown Diamonds based on Multiple Linear Regression Model". Highlights in Business, Economics and Management 35 (16.06.2024): 101–7. http://dx.doi.org/10.54097/8yaq7c77.
Pełny tekst źródłaJaskie, James E. "Diamond-Based Field-Emission Displays". MRS Bulletin 21, nr 3 (marzec 1996): 59–64. http://dx.doi.org/10.1557/s0883769400036149.
Pełny tekst źródłaSeo, Jin Kyo, Jeong Hwan Lee i Jong Wan Park. "Comparison of Natural Type Ia Diamond and CVD Diamond Films by Photoluminescence". Solid State Phenomena 124-126 (czerwiec 2007): 467–70. http://dx.doi.org/10.4028/www.scientific.net/ssp.124-126.467.
Pełny tekst źródłaPolushin, Nikolay Ivanovich, Alexander Ivanovich Laptev, Mariya Stanislavovna Shitareva, Dmitry Sergeevich Muratov, Anatoly Lvovich Maslov, Alexey Nikolaevich Kirichenko, Sergey Alexeevich Perfilov i Tatiana Vladimirovna Martynova. "The use of spectroscopy methods for structural analysis of CVD diamond films, polycrystalline and single-crystal diamonds". MATEC Web of Conferences 336 (2021): 01013. http://dx.doi.org/10.1051/matecconf/202133601013.
Pełny tekst źródłaKarpovich, Z. A., E. I. Zhimulev i A. I. Chepurov. "Growth Diamond on an Impact Lonsdaleite-bearing Diamond from the Popigai Astrobleme". Bulletin of Irkutsk State University. Series Earth Sciences 38 (2021): 41–53. http://dx.doi.org/10.26516/2073-3402.2021.38.41.
Pełny tekst źródłaSegl, Jakob, i Christian Edtmaier. "Influence of the Diamond Surface Termination on the Thermal Conductivity of Al/Diamond- and Ag/Diamond MMCs". Materials Science Forum 825-826 (lipiec 2015): 142–49. http://dx.doi.org/10.4028/www.scientific.net/msf.825-826.142.
Pełny tekst źródłaValerii, Lavrinenko, Solod Volodymyr, Ilnytska Halina, Smokvyna Volodymyr i Kashynskiy Ivan. "RESEARCH OF THERMAL INFLUENCE ON THE CHANGE OF THE SURFACE LAYER OF DIAMONDS AND ASSOCIATED TOOL MATERIALS (REVIEW)". Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences) 2, nr 43 (25.12.2023): 39–55. http://dx.doi.org/10.31319/2519-2884.43.2023.4.
Pełny tekst źródłaRozprawy doktorskie na temat "Diamond"
Spitsyn, Alexey B. "Crystallization of diamond and diamond-like nitride films from gas phase /". free to MU campus, to others for purchase, 2003. http://wwwlib.umi.com/cr/mo/fullcit?p3099640.
Pełny tekst źródłaAgahi, Maryam. "Grinding polycrystalline diamond using a diamond grinding wheel". Access electronically, 2006. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20061114.150854/index.html.
Pełny tekst źródłaNewson, Pamela Lynn. "Studies of diamond film formation". Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/30529.
Pełny tekst źródłaPham, Thanh-Toan. "Mastering the O-diamond/Al2O3 interface for unipolar boron doped diamond field effect transistor". Thesis, Université Grenoble Alpes (ComUE), 2017. http://www.theses.fr/2017GREAT051/document.
Pełny tekst źródłaNowadays, global warming effect is one of most challenging issue for human being. Most of “traditional energy” sources like thermal power; nuclear power, hydroelectricity power, etc. are dangerous and/or potentially dangerous for nature and human being. Therefore, the "greener energy" is highly desired. The "greener energy" has two folds meaning: on one hand, using renewable energy sources like solar power, wind power or geothermal energy, etc. instead of the traditional energy sources. One another hand, use the electricity more effectively and more efficiency. A recent report has pointed out that the energy loss in US is in fact more than sum of all renewable energy generate in US. Therefore, effectively utilizing electricity and limiting the waste is critical.Unfortunately, losses are the endemic of semiconductor components, the central device of all power conversion system. Silicon (Si), the main material for semiconductor components has reached its physical limit. Wide band-gap semiconductors such as SiC, GaN, Ga2O3 and diamond are promising materials to fabricate the devices low ON-state loss and high OFF-state breakdown voltage. Among them, diamond is an ideal semiconductor for power devices due to its superior physical properties. Recent progresses on diamond technology permits one consider the diamond power devices, e.g. MOSFET.In order to realize a diamond MOSFET by controlled diamond semiconductor, the numbers of issues needed to be overcome is important, especially mastering the diamond/oxide interface. In this context, G. Chicot and A. Marechal (former PhD students in our group) has introduced the O-diamond/Al2O3 MOSCAP test devices and measured the type I band alignment at O-diamond/Al2O3 interface, which is favorable to realize both inversion MOSFET and depletion MOSFET in his PhD these. This PhD project is a continuation of two-mentioned thesis and including two main objects: 1. Fundamental investigations dedicate to understand the electrical characteristic of an O-diamond MOSCAP test device; 2. Realize a unipolar diamond MOSFET by controlling the diamond semiconductor epilayer. The thesis will include three chapters:Chapter 1 discusses the context of power devices as well as the physical properties of diamond and state-of-the-art of diamond devices. We also introduce the working principle of an ideal MOSCAP test device and States-of-the-art of O-diamond MOSCAP test devices.Chapter 2 dedicates for the fundamental understanding O-diamond MOSCAP and include three main parts: Part 1 addresses the methodology issues related to diamond growth, fabrication processing and electrical characterizations. We will construct an empirical electrostatics model for O-diamond MOSCAP. Part 2 discusses the origin of leakage current and capacitance-frequency dependent when O-diamond MOSCAP is biasing in negative direction. We quantify the interface states density at O-diamond/Al2O3 interface by conductance method and the complete electrostatics model for O-diamond/Al2O3 MOSCAP will be constructed. Part 3 discusses the origin of leakage current and the capacitance-frequency dependent when the O-diamond MOS capacitor is biasing in positive direction.Chapter 3 introduces our approach to realize a depletion mode diamond MOSFET. Transistor performance and the important parameters of the transistor will be quantified. The benchmark of the device and the projection towards its improvement will be mentioned
Crudele, Marc. "Implementation of a fast tool servo with repetitive control for diamond turning". Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/17333.
Pełny tekst źródłaTraoré, Aboulaye. "High power diamond Schottky diode". Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENT093/document.
Pełny tekst źródłaThis thesis was focused on high power diamond Schottky diodes fabrication. Diamond growth and its doping are today well mastered. The advent of vertical architectures (diode active layer grown on heavily doped diamond substrate) and pseudo-vertical (stack of diode active layer and heavily doped layer grown on insulating substrate) allowed minimizing the high serial resistance, which was induced by the high ionization energy of acceptor-type dopants (boron doped diamond) preferably used in rectifiers fabrications.Besides these geometrical configurations favoring high forward currents, diamond Schottky diodes (pseudo vertical or vertical structures) were limited by: I) the quality of diode active layer altered by defects propagation from heavily doped layer thus leading to lower blocking voltage (maximum critical field of 3 MV/cm reported) than the theoretical values (theoretical values of critical field of 10 MV/cm), II) Schottky electrodes selected and the thermal and chemical stability of interfaces formed with oxygen-terminated diamond surface (required getting a Schottky contact and reducing as much as possible the interface states). Schottky metal selection and diamond surface pretreatment are crucial to get low barrier heights (low forward voltage drop and so low losses), low defects density at interfaces (low leakage current), and a thermally stable interface (high operating temperature). In this thesis, we demonstrated that a pseudo vertical diamond Schottky diode based on an oxygen-terminated surface covered by an easily oxidizable metal like zirconium (Zr) combined with an optimal heavily doped layer, allows overcoming these limitations. We first found a trade-off between the thickness of heavily doped layer and its doping level in order to minimize defects generations and thus improve the quality of diode active layer grown on the heavily doped layer (Less defects propagations). On a second hand, the Zr metallic electrodes selected gave rise to a thin zirconia interface layer which was thermally stable thus preventing the oxygen layer desorption. Zr/oxidized diamond rectifiers exhibited better features than the current state of art: a high forward current density (1000 A/cm2 at 6 V), a high critical field above 7 MV/cm (1000 V blocking voltage with a leakage current less than 1 pA), a Baliga's power figure of merit above 244 MW/cm2 (the highest value reported), a good reproducibility regardless of diodes and samples, the possibility to get a barrier heights below 1 eV by annealing, and a thermal stability higher than 500°C
Ma, Kwok Leung. "Nitrogen incorporation in nanocrystalline diamond thin films /". access abstract and table of contents access full-text, 2006. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?mphil-ap-b21471538a.pdf.
Pełny tekst źródła"Submitted to Department of Physics and Materials Science in partial fulfillment of the requirements for the degree of Master of Philosophy" Includes bibliographical references.
Hannon, Camille. "Geotectonic controls on primary diamond deposits : a review of exploration criteria". Thesis, Rhodes University, 2013. http://hdl.handle.net/10962/d1007810.
Pełny tekst źródłaKMBT_363
Adobe Acrobat 9.54 Paper Capture Plug-in
Whitehead, Kerryn. "A geochemical study of diamonds from Cullinan diamond mine, South Africa". Master's thesis, University of Cape Town, 2005. http://hdl.handle.net/11427/4231.
Pełny tekst źródłaThe Cullinan kimberlite is a Group I kimberlite and is located in the northeastern region of the Kaapvaal Craton, South Africa. The kimberlite pipe has been dated at 1180 ± 30 Ma and intrudes the Bushveld Igneous Complex (2.05 Ga). This study explores the geochemistry of a suite of one hundred selected diamonds and their associated mineral inclusions. The majority of the diamonds described here are peridotitic (94%) and the remainder are eclogitic. The peridotic inclusions may be further subdivided into harzburgitic and lherzolitic parageneses.
Chen, Yu-Chun Wilamowski Bogdan M. Tzeng Y. "Diamond chemical vapor deposition and practical applications". Auburn, Ala., 2009. http://hdl.handle.net/10415/1774.
Pełny tekst źródłaKsiążki na temat "Diamond"
Hart, Matthew. Diamond. Toronto: Viking, 2001.
Znajdź pełny tekst źródłaNATO Advanced Study Institute on Diamond and Diamond-like Films and Coatings (1990 Castelvecchio Pascoli, Italy). Diamond and diamond-like films and coatings. New York: Plenum Press, 1991.
Znajdź pełny tekst źródłaBarnard, A. S. The diamond formula: Diamond synthesis--a gemmological perspective. Oxford: Butterworth-Heinemann, 2000.
Znajdź pełny tekst źródłaUniversities' Carbon Films and Materials Group., red. Diamond growth and films. London: Elsevier Applied Science, 1989.
Znajdź pełny tekst źródłaV, Stefan, i Prokhorov A. M. 1916-, red. Diamond science and technology. Wyd. 2. La Jolla, CA: Stefan University Press, 2002.
Znajdź pełny tekst źródłaDonnelly, Jane. Diamond cut diamond. Bath, England: Chivers Press, 1991.
Znajdź pełny tekst źródłaPatch, Susanne Steinem. Blue mystery: The story of the Hope diamond. [Washington, D.C.]: Abrams, 1999.
Znajdź pełny tekst źródłaInternational Symposium on Diamond and Diamond-Like Films (1st 1989 Los Angeles). Proceedings of the First International Symposium on Diamond and Diamond-Like Films. Pennington, NJ: Electrochemical Society, 1989.
Znajdź pełny tekst źródła1953-, Prelas Mark Antonio, Popovici Galina 1940- i Bigelow Louis K. 1941-, red. Handbook of industrial diamonds and diamond films. New York: Marcel Dekker, 1998.
Znajdź pełny tekst źródłaOhlupin, Dmitriy, Al'bert Korolev i Il'ya Sinev. Mechanochemical method of polishing a polycrystalline diamond coating. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1141765.
Pełny tekst źródłaCzęści książek na temat "Diamond"
Siegel, Dina. "Conflict Diamonds? Not Every Diamond Is a Blood Diamond". W The Mazzel Ritual, 133–57. New York, NY: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-95960-3_7.
Pełny tekst źródłaHöhne, Uwe. "Diamond". W Informatik — Wirtschaft — Gesellschaft, 130–37. Berlin, Heidelberg: Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-78486-6_17.
Pełny tekst źródłaBaker, Ian. "Diamond". W Fifty Materials That Make the World, 55–58. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-78766-4_11.
Pełny tekst źródłaSein, H., C. Maryan, A. Jones, J. Verran, N. Ali, I. U. Hassan, C. Rego, W. Ahmed i M. J. Jackson. "Diamond". W Surgical Tools and Medical Devices, 149–94. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33489-9_7.
Pełny tekst źródłaCollins, Jeffrey. "Diamond". W Case Studies in Parametric Design, 214–37. London: Routledge, 2023. http://dx.doi.org/10.4324/9781003299417-9.
Pełny tekst źródłaKhalaj, Zahra, Mahmood Ghoranneviss, Elnaz Vaghri i Oana Ponta. "Diamond and Diamond-Like Carbon". W Diamond and Related Nanostructures, 29–47. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-6371-5_2.
Pełny tekst źródłaAkulov, Nikolay. "GENETIC TYPES OF DIAMOND-BEARING ROCKS". W TESTING OF SEDIMENTARY DEPOSITS AT DIAMOND SEARCHING WORKS, 18–33. au: AUS PUBLISHERS, 2022. http://dx.doi.org/10.26526/chapter_62021f6265f5d2.81992926.
Pełny tekst źródłaMackenzie, Simon. "Diamond Trafficking". W Transnational Criminology, 71–88. Policy Press, 2020. http://dx.doi.org/10.1332/policypress/9781529203783.003.0005.
Pełny tekst źródłaScholze, Peter, i Jared Weinstein. "Drinfeld’s lemma for diamonds". W Berkeley Lectures on p-adic Geometry, 140–48. Princeton University Press, 2020. http://dx.doi.org/10.23943/princeton/9780691202082.003.0016.
Pełny tekst źródłaGielisse, Peter J. "Mechanical Properties of Diamond, Diamond Films, Diamond-Like Carbon and Like-Diamond Materials". W Handbook of Industrial Diamonds and Diamond Films, 49–88. CRC Press, 2018. http://dx.doi.org/10.1201/9780203752807-3.
Pełny tekst źródłaStreszczenia konferencji na temat "Diamond"
Tillmann, W., i A. Brinkhoff. "Influence of Spraying Parameters on the Diamond Decomposition of HVOF-sprayed Nickel-Diamond Coatings". W ITSC2018, redaktorzy F. Azarmi, K. Balani, H. Li, T. Eden, K. Shinoda, T. Hussain, F. L. Toma, Y. C. Lau i J. Veilleux. ASM International, 2018. http://dx.doi.org/10.31399/asm.cp.itsc2018p0799.
Pełny tekst źródłaNa, H., G. Bae, S. Yoon, C. Lee i H. J. Kim. "Improved Deposition Characteristics of Diamond Enhanced by Plastically Deformed Nickel Layer in Kinetic Sprayed Bronze-Diamond Composite Coating". W ITSC2009, redaktorzy B. R. Marple, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima i G. Montavon. ASM International, 2009. http://dx.doi.org/10.31399/asm.cp.itsc2009p0255.
Pełny tekst źródłaKawano, Toru, i Hisamatsu Nakano. "Diamond array of diamond elements". W 2016 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications (APWC. IEEE, 2016. http://dx.doi.org/10.1109/apwc.2016.7738103.
Pełny tekst źródłaJackson, Mark J., Waqar Ahmed, Robert Woodwards i Htet Sein. "Wear of Dental Cutting Tools Coated With Nanocrystalline Diamond Coatings". W World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63922.
Pełny tekst źródłaYaneva, Mariya Zdravkova. "Sparkling treasures. Unveiling the facets of the diamond trade". W International Scientific-Practical Conference "Economic growth in the conditions of globalization". National Institute for Economic Research, 2023. http://dx.doi.org/10.36004/nier.cecg.iii.2023.17.28.
Pełny tekst źródłaFunkenbusch, P. D., Y. Y. Zhou, C. Lohnes, D. J. Quesnel, S. D. Jacobs, B. E. Puchebner, D. Golini i A. Lindquist. "Deterministic microgrinding of glass with polycrystalline diamond tools". W Optical Fabrication and Testing. Washington, D.C.: Optica Publishing Group, 1994. http://dx.doi.org/10.1364/oft.1994.omc3.
Pełny tekst źródłaBarclay, Paul. "Diamond nano-optomechanical devices". W Diamond Photonics - Physics, Technologies and Applications. Washington, D.C.: OSA, 2019. http://dx.doi.org/10.1364/dp.2019.127.
Pełny tekst źródłaVuckovic, Jelena, Constantin Dory, Shuo Sun, Alison Rugar, Daniil Lukin, Melissa Guidry i Sattwik Deb Mishra. "Optimized diamond quantum photonics". W Diamond Photonics - Physics, Technologies and Applications. Washington, D.C.: OSA, 2019. http://dx.doi.org/10.1364/dp.2019.8.
Pełny tekst źródłaWildi, Thibault, Marcell Kiss i Niels Quack. "Diamond Diffractive Beam Shapers". W Diamond Photonics - Physics, Technologies and Applications. Washington, D.C.: OSA, 2019. http://dx.doi.org/10.1364/dp.2019.80.
Pełny tekst źródłaGruhler, Nico, Maik Stappers i Wolfram Pernice. "Chipscale diamond nanophotonic circuits". W Diamond Photonics - Physics, Technologies and Applications. Washington, D.C.: OSA, 2019. http://dx.doi.org/10.1364/dp.2019.46.
Pełny tekst źródłaRaporty organizacyjne na temat "Diamond"
Iushkina, Nadezhda. Diamonds and innovations. Intellectual Archive, wrzesień 2023. http://dx.doi.org/10.32370/iaj.2945.
Pełny tekst źródłaForeman, L. R., R. S. Barbero, D. W. Carroll, T. Archuleta, J. Baker, D. Devlin, J. Duke, D. Loemier i M. Trukla. Diamond and Diamond-Like Materials as Hydrogen Isotope Barriers. Office of Scientific and Technical Information (OSTI), lipiec 1999. http://dx.doi.org/10.2172/759179.
Pełny tekst źródłaKjarsgaard, B. A. Kimberlite-hosted diamond. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1995. http://dx.doi.org/10.4095/208034.
Pełny tekst źródłaKjarsgaard, B. A. Lamproite-hosted diamond. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1995. http://dx.doi.org/10.4095/208036.
Pełny tekst źródłaLin, Shu Hwa, i Liezel Pagala. Diamond Cut Dress. Ames: Iowa State University, Digital Repository, wrzesień 2016. http://dx.doi.org/10.31274/itaa_proceedings-180814-1609.
Pełny tekst źródłaMarkunas, R. J., R. A. Rudder, J. B. Posthill, R. E. Thomas i G. Hudson. Heteroepitaxial Diamond Growth. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 1995. http://dx.doi.org/10.21236/ada298591.
Pełny tekst źródłaMarkunas, R. J., R. A. Rudder, J. B. Posthill, R. E. Thomas i G. Hudson. Heteroepitaxial Diamond Growth. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 1995. http://dx.doi.org/10.21236/ada298592.
Pełny tekst źródłaGleason, Karen K. Artifact Diamond Characterization. Fort Belvoir, VA: Defense Technical Information Center, styczeń 1991. http://dx.doi.org/10.21236/ada231555.
Pełny tekst źródłaMarkunas, R. J., R. A. Rudder, J. B. Posthill i R. E. Thomas. Semiconductor Diamond Technology. Fort Belvoir, VA: Defense Technical Information Center, marzec 1991. http://dx.doi.org/10.21236/ada233293.
Pełny tekst źródłaKrstulic, J. F. Diamond Measuring Machine. Office of Scientific and Technical Information (OSTI), styczeń 2000. http://dx.doi.org/10.2172/750426.
Pełny tekst źródła