Gotowe bibliografie tematyczne / Deformed materials / Artykuły w czasopismach
Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Deformed materials.

Artykuły w czasopismach na temat „Deformed materials”

Autor: Grafiati
Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Deformed materials”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Destrade, M. "Surface waves in deformed Bell materials". International Journal of Non-Linear Mechanics 38, nr 6 (wrzesień 2003): 809–14. http://dx.doi.org/10.1016/s0020-7462(01)00125-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Embury, J. D. "Micromechanical descriptions of heavily deformed materials". Scripta Metallurgica et Materialia 27, nr 8 (październik 1992): 981–86. http://dx.doi.org/10.1016/0956-716x(92)90460-v.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Klimanek, P., V. Klemm, A. E. Romanov i M. Seefeldt. "Disclinations in Plastically Deformed Metallic Materials". Advanced Engineering Materials 3, nr 11 (listopad 2001): 877. http://dx.doi.org/10.1002/1527-2648(200111)3:11<877::aid-adem877>3.0.co;2-l.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Sauvage, Xavier, Amandine Duchaussoy i Ghenwa Zaher. "Strain Induced Segregations in Severely Deformed Materials". MATERIALS TRANSACTIONS 60, nr 7 (1.07.2019): 1151–58. http://dx.doi.org/10.2320/matertrans.mf201919.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Delsanto, P. P., i A. V. Clark. "Rayleigh wave propagation in deformed orthotropic materials". Journal of the Acoustical Society of America 81, nr 4 (kwiecień 1987): 952–60. http://dx.doi.org/10.1121/1.394575.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Field, D. P. "Analysis of Grain Fragmentation in Deformed Materials". Microscopy and Microanalysis 9, S02 (28.07.2003): 76–77. http://dx.doi.org/10.1017/s1431927603440993.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Ivlev, Y. "Vibrational compaction of hard deformed powder materials". Metal Powder Report 52, nr 7-8 (lipiec 1997): 38. http://dx.doi.org/10.1016/s0026-0657(97)80176-2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Ivlev, Y. "Vibrational compaction of hard deformed powder materials". Metal Powder Report 53, nr 7-8 (8.07.1997): 38. http://dx.doi.org/10.1016/s0026-0657(97)84682-6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Merala, T. B., H. W. Chan, D. G. Howitt, P. V. Kelsey, G. E. Korth i R. L. Williamson. "Dislocation microstructures in explosively deformed hard materials". Materials Science and Engineering: A 105-106 (listopad 1988): 293–98. http://dx.doi.org/10.1016/0025-5416(88)90510-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Baranov, V. L., i A. V. Kanunnikov. "Response of deformed materials in dynamic contact". Russian Engineering Research 28, nr 11 (listopad 2008): 1058–62. http://dx.doi.org/10.3103/s1068798x08110075.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
11

Ovid'ko, I. "Triple junction nanocracks in deformed nanocrystalline materials". Acta Materialia 52, nr 5 (8.03.2004): 1201–9. http://dx.doi.org/10.1016/j.actamat.2003.11.004.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
12

Belyakov, Andrey, i Rustam Kaibyshev. "Two Types of Grain Boundaries in Deformed Materials". Materials Science Forum 207-209 (luty 1996): 461–64. http://dx.doi.org/10.4028/www.scientific.net/msf.207-209.461.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
13

Scheriau, S., M. Kriegisch, S. Kleber, N. Mehboob, R. Grössinger i R. Pippan. "Magnetic characteristics of HPT deformed soft-magnetic materials". Journal of Magnetism and Magnetic Materials 322, nr 20 (październik 2010): 2984–88. http://dx.doi.org/10.1016/j.jmmm.2010.04.032.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
14

Galich, Pavel I., Nicholas X. Fang, Mary C. Boyce i Stephan Rudykh. "Elastic wave propagation in finitely deformed layered materials". Journal of the Mechanics and Physics of Solids 98 (styczeń 2017): 390–410. http://dx.doi.org/10.1016/j.jmps.2016.10.002.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
15

Gutkin, M. Yu, i I. A. Ovid’ko. "Generation of dislocation loops in deformed nanocrystalline materials". Philosophical Magazine 86, nr 11 (11.04.2006): 1483–511. http://dx.doi.org/10.1080/14786430500199302.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
16

Ovid’ko, I. A., i A. G. Sheinerman. "Elliptic nanopores in deformed nanocrystalline and nanocomposite materials". Philosophical Magazine 86, nr 10 (kwiecień 2006): 1415–26. http://dx.doi.org/10.1080/14786430500311766.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
17

BOULANGER, PH, i M. HAYES. "FINITE-AMPLITUDE WAVES IN DEFORMED MOONEY-RIVLIN MATERIALS". Quarterly Journal of Mechanics and Applied Mathematics 45, nr 4 (1992): 575–93. http://dx.doi.org/10.1093/qjmam/45.4.575.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
18

Gil Sevillano, J., i E. Aernoudt. "Low energy dislocation structures in highly deformed materials". Materials Science and Engineering 86 (luty 1987): 35–51. http://dx.doi.org/10.1016/0025-5416(87)90441-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
19

Destrade, M., M. Otténio, A. V. Pichugin i G. A. Rogerson. "Non-principal surface waves in deformed incompressible materials". International Journal of Engineering Science 43, nr 13-14 (wrzesień 2005): 1092–106. http://dx.doi.org/10.1016/j.ijengsci.2005.03.009.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
20

Freudenberger, J., J. Lyubimova, A. Gaganov, H. Klauß i L. Schultz. "Mechanical behaviour of heavily deformed CuAgZr conductor materials". Journal of Physics: Conference Series 240 (1.07.2010): 012112. http://dx.doi.org/10.1088/1742-6596/240/1/012112.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
21

Bobylev, S. V., M. Yu Gutkin i I. A. Ovid'ko. "Transformations of grain boundaries in deformed nanocrystalline materials". Acta Materialia 52, nr 13 (sierpień 2004): 3793–805. http://dx.doi.org/10.1016/j.actamat.2004.04.029.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
22

Romanov, A. E. "Importance of Disclinations in Severe Plastically Deformed Materials". Advanced Engineering Materials 5, nr 5 (16.05.2003): 301–7. http://dx.doi.org/10.1002/adem.200310087.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
23

Benn, Douglas I., i David J. A. Evans. "The interpretation and classification of subglacially-deformed materials". Quaternary Science Reviews 15, nr 1 (styczeń 1996): 23–52. http://dx.doi.org/10.1016/0277-3791(95)00082-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
24

Sakai, Taku, i Hiromi Miura. "Annealing of Deformed Materials Developed by Continuous/Discontinuous Dynamic Recrystallization". Materials Science Forum 550 (lipiec 2007): 327–32. http://dx.doi.org/10.4028/www.scientific.net/msf.550.327.

Pełny tekst źródła
Streszczenie:
Annealing behaviour was studied in deformed copper developed by continuous or discontinuous dynamic recrystallization (cDRX or dDRX). Pure copper was deformed to large strains by multi-directional forging at room temperature, resulting in an ultra-fine grained structure due to operation of cDRX. Subsequent annealing of such a fine-grained copper can be controlled mainly by grain growth accompanied with recovery and no texture change, that is continuous static recrystallization (cSRX). On the other hand, 4 kinds of static restoration processes operate during annealing of dDRXed copper, i.e. metadaynamic recovery and recystallization (mDRV and mDRX), and classical static recovery and recrystallization. The stable existence of mDRVed grains containing moderate dislocations leads to incomplete recrystallization even after a long period of annealing time. It is discussed how such various types of annealing processes, occurring in cDRXed or dDRXed matrices, can be connected with the characteristic nature of the deformed microstructures.
Style APA, Harvard, Vancouver, ISO itp.
25

Kramer, M. J., L. S. Chumbley i R. W. McCallum. "Analysis of deformed YBa2Cu3O7??" Journal of Materials Science 25, nr 4 (kwiecień 1990): 1978–86. http://dx.doi.org/10.1007/bf01045752.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
26

Zhang, Zhenglin, Yangyang Sun, Qinghua Zhang, Jianli Duan i Lei Gao. "Applications of optical frequency-domain reflectometry technology in strain-deformed configuration conversion of structural surface deformed configuration measurement". International Journal of Distributed Sensor Networks 15, nr 11 (listopad 2019): 155014771989163. http://dx.doi.org/10.1177/1550147719891636.

Pełny tekst źródła
Streszczenie:
In this study, the conversion relation between deformed configuration and strain during structural monitoring was analyzed based on the basic mechanics principle of materials. A distributed fiber optic measurement system was used to measure the accurate values of structural surface strain, and then calculate the intensity of surface-deformed configuration further. An optical fiber was attached to the surface of a flexible steel ruler, and the generated strain data were used to precisely measure the endpoint-deformed configuration of the ruler. Furthermore, the calculated deformed configuration was calculated and compared with the actual deformed configuration. It was found that the curves of calculated deformed configuration basically coincided (with a relative error of less than 0.6%) with the curves of actual deformed configuration.
Style APA, Harvard, Vancouver, ISO itp.
27

Kassner, M. E., P. Geantil, L. E. Levine i B. C. Larson. "Backstress, the Bauschinger Effect and Cyclic Deformation". Materials Science Forum 604-605 (październik 2008): 39–51. http://dx.doi.org/10.4028/www.scientific.net/msf.604-605.39.

Pełny tekst źródła
Streszczenie:
Backstresses or long range internal stresses (LRIS) in the past have been suggested by many to exist in plastically deformed crystalline materials. Elevated stresses can be present in regions of elevated dislocation density or dislocation heterogeneities in the deformed microstructures. The heterogeneities include edge dislocation dipole bundles (veins) and the edge dipole walls of persistent slip bands (PSBs) in cyclically deformed materials and cell and subgrain walls in monotonically deformed materials. The existence of long range internal stress is especially important for the understanding of cyclic deformation and also monotonic deformation. X-ray microbeam diffraction experiments performed by the authors using synchrotron x-ray microbeams determined the elastic strains within the cell interiors. The studies were performed using, oriented, monotonically deformed Cu single crystals. The results demonstrate that small long-range internal stresses are present in cell interiors. These LRIS vary substantially from cell to cell as 0 % to 50 % of the applied stress. The results are related to the Bauschinger effect, often explained in terms of LRIS.
Style APA, Harvard, Vancouver, ISO itp.
28

Wilde, Gerhard, i Sergiy Divinski. "Grain Boundaries and Diffusion Phenomena in Severely Deformed Materials". MATERIALS TRANSACTIONS 60, nr 7 (1.07.2019): 1302–15. http://dx.doi.org/10.2320/matertrans.mf201934.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
29

Panin, V. E., N. S. Surikova, A. S. Smirnova i Yu I. Pochivalov. "Mesoscopic Structural States in Plastically Deformed Nanostructured Metal Materials". Physical Mesomechanics 21, nr 5 (wrzesień 2018): 396–400. http://dx.doi.org/10.1134/s102995991805003x.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
30

Boulanger, Ph, M. Hayes i C. Trimarco. "Finite-amplitude plane waves in deformed Hadamard elastic materials". Geophysical Journal International 118, nr 2 (sierpień 1994): 447–58. http://dx.doi.org/10.1111/j.1365-246x.1994.tb03976.x.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
31

Petrov, A. I., i M. V. Razuvaeva. "Criterion for the pore-pore interaction in deformed materials". Technical Physics 60, nr 4 (kwiecień 2015): 607–9. http://dx.doi.org/10.1134/s1063784215040210.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
32

Kratochvíl, Jan, Martin Kružík i Radan Sedláček. "Instability origin of subgrain formation in plastically deformed materials". International Journal of Engineering Science 48, nr 11 (listopad 2010): 1401–12. http://dx.doi.org/10.1016/j.ijengsci.2010.09.017.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
33

WALGRAEF, D. "Reaction-transport dynamics and dislocation patterns in deformed materials". Earth-Science Reviews 29, nr 1-4 (październik 1990): 299–308. http://dx.doi.org/10.1016/0012-8252(90)90044-v.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
34

Leffers, T. "Long-range stresses associated with boundaries in deformed materials". Physica Status Solidi (a) 149, nr 1 (16.05.1995): 69–84. http://dx.doi.org/10.1002/pssa.2211490105.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
35

Yu, Tianbo, i Niels Hansen. "Coarsening kinetics of fine-scale microstructures in deformed materials". Acta Materialia 120 (listopad 2016): 40–45. http://dx.doi.org/10.1016/j.actamat.2016.08.032.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
36

Martinkovič, Maroš, i Stefan Vaclav. "Estimation of Local Plastic Deformation of Polycrystalline Materials". Key Engineering Materials 586 (wrzesień 2013): 39–42. http://dx.doi.org/10.4028/www.scientific.net/kem.586.39.

Pełny tekst źródła
Streszczenie:
Final properties of formed steel or another alloy pieces are affected even by plastic deformation of material. Therefore it is needful to know detail structure changes of material under conditions of plastic deformation caused by forming, grinding, drilling etc. Estimation of the deformation based on its observable macroscopic effects doesn’t correspond fully with microscopic structural changes in whole volume of deformed parts and such estimation is quite impossible in case if only surface layers are deformed. It is possible to obtain value of strain by measurement of grain boundary deformation. Effect of grains boundaries self-orientation caused by grains deformation can be identified on metallographic cut. Stereological measurement of degree of grain boundary orientation is relatively simple if axes of orientation are known (as it is in most of deformation processes). Preferred direction of grains boundaries orientation is the same as direction of deformation; however orientation is not the same thing as deformation. Therefore model of conversion of degree of grain boundary orientation to deformation based on an idealized shape of grains has been proposed. This conversion model is independent on an initial grain size – strain depends only on the shape of the grain and does not depend on its dimension. It allows experimental estimation of local plastic deformation by means of measurement of grain boundary orientation in various areas of plastically deformed parts.
Style APA, Harvard, Vancouver, ISO itp.
37

Hao, Min, Cheng Wen Tan, Xu Dong Wang, Wei Wei He i Bin Yang. "Impact of Peak Shock Stress on the Microstructure and Reloaded Mechanical Behavior of AZ31 Magnesium Alloy". Materials Science Forum 788 (kwiecień 2014): 64–67. http://dx.doi.org/10.4028/www.scientific.net/msf.788.64.

Pełny tekst źródła
Streszczenie:
Magnesium alloys can be utilized as potential aerospace materials due to their low density, high specific strength, good vibration and shock absorption ability. This paper deals with the mechanical behavior of hot-rolled AZ31 alloy that was shock-deformed to 2.3 and 3.3 GPa. The post shock microstructure and mechanical response have been determined via full one-dimensional recovery techniques. The microstructure of deformed sample was characterized by the transmission electron microscopy (TEM) and electron back scattered diffraction (EBSD) techniques. All the shock-deformed materials showed shock-strengthening effect that was greater at higher shock pressure. The reload yield stress of the shock-deformed 2.3 GPa sample was determined to be 238 MPa while 264 MPa for the sample which shock-deformed at 3.3 GPa. It was postulated that the shock-strengthening is ascribed to a greater dislocation density and the formation of deformation twins.
Style APA, Harvard, Vancouver, ISO itp.
38

Swamy, P. Narayana. "q-deformed Fermions". European Physical Journal B 50, nr 1-2 (16.02.2006): 291–94. http://dx.doi.org/10.1140/epjb/e2006-00055-7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
39

Bartha, Kristína, Anna Terynková, Josef Stráský, Peter Minárik, Jozef Veselý, Veronika Polyakova, Irina Semenova i Miloš Janeček. "Inhomogeneous Precipitation of the α-Phase in Ti15Mo Alloy Deformed by ECAP". Materials Science Forum 941 (grudzień 2018): 1183–88. http://dx.doi.org/10.4028/www.scientific.net/msf.941.1183.

Pełny tekst źródła
Streszczenie:
A metastable β-titanium alloy, Ti15Mo was subjected to equal channel angular pressing (ECAP). The resulting microstructure of the material is inhomogeneous consisting of micrometer size β-grains with deformed bands containing ultra-fine β-grains. The ECAP-deformed sample was subjected to thermal treatment in order to elucidate the difference in morphology of the α-phase precipitation in deformed and non-deformed materials. The α-phase formation is accelerated in areas with higher concentration of lattice defects. The detail investigation by transmission electron microscopy revealed equixed α-phase formation in deformed bands. In the transition area between deformed band and β-matrix grain boundary α-phase forms while in the interior of the β-grains the α-phase precipitation is suppressed.
Style APA, Harvard, Vancouver, ISO itp.
40

Zhang, Wenxue, Youping Yi, Shiquan Huang, Hailin He i Fei Dong. "Effects of Deformation at High, Medium, and Cryogenic Temperatures on the Microstructures and Mechanical Properties of Al-Zn-Mg-Cu Alloys". Materials 15, nr 19 (7.10.2022): 6955. http://dx.doi.org/10.3390/ma15196955.

Pełny tekst źródła
Streszczenie:
Thermomechanical treatment is an effective way to refine the coarse microstructures of aluminum alloys. In this work, multiaxial forging deformation at high, medium, and cryogenic temperatures (i.e., 450, 250, and −180 °C, respectively) was performed on 7085 Al-Zn-Mg-Cu alloys, and its effect on the microstructure evolution and mechanical properties during the subsequent T6 heat treatment process was studied. The results revealed that the coarse particles were broken into finer particles when deformed at cryogenic temperatures, promoting the dissolution of the material after solid solution treatment. Dynamic recrystallization occurred when deformed at 450 °C; however, more dislocations and substructures were found in the samples deformed at 250 and −180 °C, causing static recrystallization after solid solution treatment. The cryogenic deformed sample exhibited a more intense and homogeneous precipitation phase distribution. The strength of the sample deformed at high temperature was high, but its elongation was low, while the strength of the sample deformed at medium temperature was low. The microstructure refinement of the cryogenic deformed sample led to high comprehensive mechanical properties, with an ultimate tensile strength of 535 MPa, a yield strength of 506 MPa, and a fracture elongation of 11.1%.
Style APA, Harvard, Vancouver, ISO itp.
41

Gentot, Laetitia, Mathias Brieu i Gérard Mesmacque. "Modeling of Stress-Softening for Elastomeric Materials". Rubber Chemistry and Technology 77, nr 4 (1.09.2004): 759–75. http://dx.doi.org/10.5254/1.3547850.

Pełny tekst źródła
Streszczenie:
Abstract An experimental study of deformed reinforced elastomeric materials in uni-axial tension test has been carried out and brings to the fore a significant stress-softening during the first cycles. A new predicted stress-softening model is proposed and well adapted to many rubber-like materials.
Style APA, Harvard, Vancouver, ISO itp.
42

Venerus, David C., David Nieto Simavilla i Jay D. Schieber. "THERMAL TRANSPORT IN CROSS-LINKED ELASTOMERS SUBJECTED TO ELONGATIONAL DEFORMATIONS". Rubber Chemistry and Technology 92, nr 4 (1.10.2019): 639–52. http://dx.doi.org/10.5254/rct.19.80382.

Pełny tekst źródła
Streszczenie:
ABSTRACT Investigations on thermal transport in cross-linked elastomers subjected to elongational deformations are reviewed and discussed. The focus is on experimental research, in which the deformation-induced anisotropy of the thermal conductivity tensor in several common elastomeric materials is measured using novel optical techniques developed in our laboratory. These sensitive and noninvasive techniques allow for the reliable measurement of thermal conductivity (diffusivity) tensor components on samples in a deformed state. When combined with measurements of the stress in deformed samples, we are able to examine the validity of the stress–thermal rule, which predicts a linear relationship between the thermal conductivity and stress tensor in deformed polymeric materials. These results are used to shed light on possible underlying mechanisms for anisotropic thermal transport in elastomers. We also present results from a novel experimental technique that show evidence of a deformation dependence of the heat capacity, which implies that, in addition to the usual entropic contribution, there is an energetic contribution to the stress in deformed elastomers.
Style APA, Harvard, Vancouver, ISO itp.
43

Landau, P., R. Z. Shneck, G. Makov i A. Venkert. "Microstructure evolution in deformed copper". Journal of Materials Science 42, nr 23 (20.08.2007): 9775–82. http://dx.doi.org/10.1007/s10853-007-1999-6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
44

Zaefferer, S. "On-Line Semi-Automatic Measurement of Individual Crystal Orientations in Heavily Deformed Materials in the TEM". Microscopy and Microanalysis 5, S2 (sierpień 1999): 202–3. http://dx.doi.org/10.1017/s1431927600014331.

Pełny tekst źródła
Streszczenie:
The measurement of individual crystal orientations in heavily deformed materials is of great importance especially for the study of recrystallization mechanisms. The electron backscattering diffraction (EBSD) technique which is frequently used nowadays in the SEM for these kind of studies has three important drawbacks: first, its spatial resolution is limited to about 0.5 μm, second, the sample deformation is limited to only about 60 %, and third, the dislocation microstructure cannot be observed. All these problems can be overcome using a micro beam diffraction technique in the TEM. Two techniques can be distinguished, the Kikuchi pattern technique and the spot pattern technique. With a spatial resolution of down to about 10 nm they arc well suited for orientation measurements in highly deformed material. Nevertheless, since spot patterns are less sensible to deformation the spot technique is the ultimate choice in the case a most highly deformed material. An automatic procedure for the evaluation of spot patterns has been developed and, together with the Kikuchi technique, implemented in a computer program for the on-line analysis of crystal orientations at the TEM. The new procedure and its applications to highly deformed materials is the subject of this presentation. Spot patterns are less sensitive to the sample deformation than Kikuchi patterns due to the differences in the diffraction geometry and due to the relaxation of the Bragg diffraction conditions for spot patterns.
Style APA, Harvard, Vancouver, ISO itp.
45

Scardi, Paolo, Matteo Leoni i Mirco D'Incau. "Full Pattern Methods for the Analysis of Plastically Deformed Materials". Solid State Phenomena 130 (grudzień 2007): 27–32. http://dx.doi.org/10.4028/www.scientific.net/ssp.130.27.

Pełny tekst źródła
Streszczenie:
The recent evolution of powder diffraction line profile analysis toward full pattern methods is discussed. Specific reference is made to the Whole Powder Pattern Modelling (WPPM), as applied to metals and ceramics subjected to strong plastic deformation. Examples concerning three different materials science studies are shown to illustrate features and potentialities of the WPPM approach.
Style APA, Harvard, Vancouver, ISO itp.
46

Miyamoto, Hiroyuki, Motohiro Yuasa, Muhammad Rifai i Hiroshi Fujiwara. "Corrosion Behavior of Severely Deformed Pure and Single-Phase Materials". MATERIALS TRANSACTIONS 60, nr 7 (1.07.2019): 1243–55. http://dx.doi.org/10.2320/matertrans.mf201935.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
47

Leem, Juyoung. "A snapshot review on exciton engineering in deformed 2D materials". MRS Advances 5, nr 64 (2020): 3491–506. http://dx.doi.org/10.1557/adv.2020.350.

Pełny tekst źródła
Streszczenie:
AbstractMost optoelectronic characteristics of two-dimensional (2D) materials are associated with excitonic effects. Excitonic effects in 2D material have been intensively investigated, and various efforts to engineer exciton behavior in 2D materials have been reported for advanced nanophotonic and optoelectronic applications. Excitons in 2D semiconductors can be controlled by external stimuli, including mechanical, electrical, thermal, and magnetic stimuli. Mechanical stimuli applied to a 2D material can generate uniform or non-uniform deformation and strain gradient in the 2D lattice, which creates a strain-induced bandgap energy gradient in the 2D material. In an inhomogeneous bandgap energy gradient generated by a non-uniform strain gradient, excitons drift across the energy gradient. Exciton engineering in deformed 2D materials aims to control exciton movement by mechanical strain. In this snapshot review, we focus on exciton engineering in a mechanically deformed 2D material and their potential towards advanced optoelectronic and photonic applications.
Style APA, Harvard, Vancouver, ISO itp.
48

Biradar, A. M., S. S. Bawa i W. Haase. "Goldstone mode behaviour in deformed helix ferroelectric liquid crystal materials". Ferroelectrics 256, nr 1 (styczeń 2001): 201–10. http://dx.doi.org/10.1080/00150190108015984.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
49

Henn, Tamás, i Róbert W. Pál. "Evaluation of desiccated and deformed diaspores from natural building materials". Ethnobiology Letters 6, nr 1 (27.03.2015): 10–24. http://dx.doi.org/10.14237/ebl.6.1.2015.229.

Pełny tekst źródła
Streszczenie:
With the increasing sophistication of paleoethnobotanical methods, it is now possible to reconstruct new aspects of the day-to-day life of past peoples, and, ultimately, gain information about their cultivated plants, land-use practices, architecture, diet, and trade. Reliable identification of plant remains, however, remains essential to the study of paleoethnobotany, and there is still much to learn about precise identification. This paper describes and evaluates the most frequent types of deformed desiccated diaspores revealed from adobe bricks used in buildings in Southwestern Hungary that were built primarily between 1850 and 1950. A total of 24,634 diaspores were recovered from 333.05 kg adobe samples. These seeds and fruits belong to 303 taxa, and the majority were arable and ruderal weed species. A total of 98.97% of the diaspores were identified to species. In other cases, identification was possible only to genus or family (0.93% and 0.10% of diaspores, respectively). Difficulties in identification were caused mainly by morphological changes in the size, shape, color, and surface features of diaspores. Most diaspores were darker in color and significantly smaller than fresh or recently desiccated seeds and fruits. Surface features were often absent or fragmented. The most problematic seeds to identify were those of Centaurea cyanus, Consolida regalis, Scleranthus annuus and Daucus carota ssp. carota, which are discussed in detail. Our research aids archaeobotanists in the identification of desiccated and deformed diaspores.
Style APA, Harvard, Vancouver, ISO itp.
50

Rushchitsky, Jeremiah. "Self-switching of displacement waves in elastic nonlinearly deformed materials". Comptes Rendus Mécanique 330, nr 3 (styczeń 2002): 175–80. http://dx.doi.org/10.1016/s1631-0721(02)01444-4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany bibliografiami na temat „Deformed materials” dla innych typów źródeł:
Rozprawy doktorskie
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii