Gotowa bibliografia na temat „DEFECT CORRECTION METHODS”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „DEFECT CORRECTION METHODS”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "DEFECT CORRECTION METHODS"
Skeel, Robert D., K. Bohmer i H. J. Stetter. "Defect Correction Methods--Theory and Applications." Mathematics of Computation 47, nr 175 (lipiec 1986): 374. http://dx.doi.org/10.2307/2008106.
Pełny tekst źródłaHaigang, Yang. "Defect-correction multigrid methods for nonlinear problems". Applied Mathematics and Computation 23, nr 4 (wrzesień 1987): 359–64. http://dx.doi.org/10.1016/0096-3003(87)90061-0.
Pełny tekst źródłaFrank, R., J. Hertling i H. Lehner. "B-convergence properties of defect correction methods. I". Numerische Mathematik 49, nr 2-3 (marzec 1986): 139–62. http://dx.doi.org/10.1007/bf01389621.
Pełny tekst źródłaFrank, R., J. Hertling i H. Lehner. "B-convergence properties of defect correction methods. II". Numerische Mathematik 49, nr 2-3 (marzec 1986): 163–88. http://dx.doi.org/10.1007/bf01389622.
Pełny tekst źródłaErvin, V. J., W. J. Layton i J. M. Maubach. "Adaptive Defect-Correction Methods for Viscous Incompressible Flow Problems". SIAM Journal on Numerical Analysis 37, nr 4 (styczeń 2000): 1165–85. http://dx.doi.org/10.1137/s0036142997318164.
Pełny tekst źródłaSchuster, T. "Error estimates for defect correction methods in Doppler tomography". Journal of Inverse and Ill-posed Problems 14, nr 1 (styczeń 2006): 83–106. http://dx.doi.org/10.1515/156939406776237465.
Pełny tekst źródłaAxelsson, O., i W. Layton. "Defect correction methods for convection dominated convection-diffusion problems". ESAIM: Mathematical Modelling and Numerical Analysis 24, nr 4 (1990): 423–55. http://dx.doi.org/10.1051/m2an/1990240404231.
Pełny tekst źródłaGądek-Moszczak, Aneta, Leszek Wojnar i Adam Piwowarczyk. "Comparison of Selected Shading Correction Methods". System Safety: Human - Technical Facility - Environment 1, nr 1 (1.03.2019): 819–26. http://dx.doi.org/10.2478/czoto-2019-0105.
Pełny tekst źródłaKaya, Songul, William Layton i Béatrice Rivière. "Subgrid Stabilized Defect Correction Methods for the Navier–Stokes Equations". SIAM Journal on Numerical Analysis 44, nr 4 (styczeń 2006): 1639–54. http://dx.doi.org/10.1137/050623942.
Pełny tekst źródłaCawood, M. E., V. J. Ervin, W. J. Layton i J. M. Maubach. "Adaptive defect correction methods for convection dominated, convection diffusion problems". Journal of Computational and Applied Mathematics 116, nr 1 (kwiecień 2000): 1–21. http://dx.doi.org/10.1016/s0377-0427(99)00278-2.
Pełny tekst źródłaRozprawy doktorskie na temat "DEFECT CORRECTION METHODS"
Lai, Liang Simon. "Defect correction methods for computational aeroacoustics". Thesis, University of Greenwich, 2013. http://gala.gre.ac.uk/11452/.
Pełny tekst źródłaSiahaan, Antony. "Defect correction based domain decomposition methods for some nonlinear problems". Thesis, University of Greenwich, 2011. http://gala.gre.ac.uk/7144/.
Pełny tekst źródłaDerlaga, Joseph Michael. "Application of Improved Truncation Error Estimation Techniques to Adjoint Based Error Estimation and Grid Adaptation". Diss., Virginia Tech, 2015. http://hdl.handle.net/10919/54592.
Pełny tekst źródłaPh. D.
Chibi, Ahmed-Salah. "Defect correction and Galerkin's method for second-order elliptic boundary value problems". Thesis, Imperial College London, 1989. http://hdl.handle.net/10044/1/47378.
Pełny tekst źródłaCavard, Catherine. "Les deficits en ornithine transcarbamylase : un modele de correction d'un deficit enzymatique par transfert de genes". Paris 7, 1988. http://www.theses.fr/1988PA077026.
Pełny tekst źródłaBarbié, Laureline. "Raffinement de maillage multi-grille local en vue de la simulation 3D du combustible nucléaire des Réacteurs à Eau sous Pression". Thesis, Aix-Marseille, 2013. http://www.theses.fr/2013AIXM4742.
Pełny tekst źródłaThe aim of this study is to improve the performances, in terms of memory space and computational time, of the current modelling of the Pellet-Cladding mechanical Interaction (PCI),complex phenomenon which may occurs during high power rises in pressurised water reactors. Among the mesh refinement methods - methods dedicated to efficiently treat local singularities - a local multi-grid approach was selected because it enables the use of a black-box solver while dealing few degrees of freedom at each level. The Local Defect Correction (LDC) method, well suited to a finite element discretisation, was first analysed and checked in linear elasticity, on configurations resulting from the PCI, since its use in solid mechanics is little widespread. Various strategies concerning the implementation of the multilevel algorithm were also compared. Coupling the LDC method with the Zienkiewicz-Zhu a posteriori error estimator in orderto automatically detect the zones to be refined, was then tested. Performances obtained on two-dimensional and three-dimensional cases are very satisfactory, since the algorithm proposed is more efficient than h-adaptive refinement methods. Lastly, the LDC algorithm was extended to nonlinear mechanics. Space/time refinement as well as transmission of the initial conditions during the remeshing step were looked at. The first results obtained are encouraging and show the interest of using the LDC method for PCI modelling
Loy, Kak Choon. "Efficient Semi-Implicit Time-Stepping Schemes for Incompressible Flows". Thesis, Université d'Ottawa / University of Ottawa, 2017. http://hdl.handle.net/10393/36442.
Pełny tekst źródłaFröhner, Anja. "Defektkorrekturverfahren für singulär gestörte Randwertaufgaben". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2002. http://nbn-resolving.de/urn:nbn:de:swb:14-1043050731546-74245.
Pełny tekst źródłaWe consider a defect correction method that combines a first-order upwinded difference scheme with a second-order central difference scheme for model singularly perturbed convection-diffusion problems in one and two dimensions on a class of Shishkin-Type meshes. In one dimension, the method is shown to be convergent uniformly in the diffusion parameter $\epsilon$ of second order in the discrete maximum norm. To analyze the two-dimensional case, we discuss several proof techniques for defect correction methods. For a special problem with constant coefficients on a piecewise uniform Shishkin-mesh we can show the second order convergence of the considered scheme, uniformly with respect to the diffusion parameter. Moreover the known stability properties and their impact on the convergence analysis of the considered differnce schemes are compiled. Some remarks on defect correction and finite elements conclude the theses. Numerical experiments support our theoretical results
CHENG, YU-HSUN, i 鄭又勳. "Design Spectral Image Correction Methods for Optical Defects in Shortwave Infrared Liquid Crystal Tunable Filters". Thesis, 2018. http://ndltd.ncl.edu.tw/handle/ey28mm.
Pełny tekst źródła國立中正大學
資訊工程研究所
106
Short-wave infrared (SWIR) hyperspectral image (HSI) provides detailed spectral information regardless of target detection applications in military or search and rescue. While most HSI tasks image a static scene by a push-broom scanner, here a liquid crystal tunable filter (LCTF) is mounted in front of a broad-band SWIR camera to take snapshots of dynamic scenes. Due to the optical defects in LCTF, the collected images have pattern of interference fringes (PIF), which causes spatial and spectral distortion and interferes the target recognition tasks. Therefore, the purpose of this study is to develop a correction algorithm to eliminate PIF in the spectral images, and improve the recognition accuracy. We experimentally investigated the cause of PIF, and found the cost of hardware solution is very high. Therefore, we turned to develop algorithmic solutions. By collecting the reference images with PIF only, we examined three correction methods: (1) Template-based elimination, which directly subtracts the reference from the collected image; (2) Two-point correction, which uses two referenced intensities to derive a linear curve to predict the original pixel intensities; (3) Polynomial fitting, which uses multiple reference intensities to derive a nonlinear curve to predict the original pixel intensities. We found the third method is the most effective. Their technical details and corresponding experimental results are documented in the thesis.
Ferrer, João Pedro Nunes. "A method of identification and correction of industrial robots defects using an inclinometer-based sensor". Master's thesis, 2015. http://hdl.handle.net/10316/29595.
Pełny tekst źródłaThis work is integrated in a project of development of a novel measurement device, the BMG-4 sensor, and its application in the calibration of industrial robots. The aim of the work is to define procedures and strategies that enable, through the BMG-4, to identify both geometric and compliance errors that are present in 6-axes serial industrial robots. The importance of accuracy and robot calibration as well as the problem of the suitability of most measurement systems to industrial environments is highlighted. Consequently, the BMG-4 is introduced as a solution that meets the demands of those conditions. A geometrical methodology is defined to determine the direction of a robot’s axis and to assess its accuracy. A protocol that allows to identify the real angular geometric parameters of the robot, as well as the offsets of some axes is presented. Then, a strategy is developed in order to be able to identify the compliances of the last five axes of the robot. All the tests are performed in an ABB IRB 6600 industrial robot. For axes 2 and 3, the maximum values obtained for inaccuracy are 0,062° and 0,229°, respectively. Also, the robot presents several considerable joints’ offsets errors. For axes 4 and 5 those values are −0,99° and 0,83°. The combined offset of axes 2 and 3 is −0,28°. The stiffness of axis 2 is determined, having an estimated value of 2,4 × 106 N.m/rad. Finally, a standard robot convention is proposed in order to correct the identified errors with a generalized compensation algorithm.
Este trabalho está integrado num projeto de desenvolvimento de um novo dispositivo de medição, o sensor BMG-4, e da sua aplicação na calibração de robôs industriais. O objetivo do trabalho é a definição de procedimentos e estratégias que permitem, através do BMG-4, identificar erros provenientes tanto da geometria como da flexibilidade das articulações do robô que estão presentes em robôs industriais de 6-eixos. A importância da precisão e da calibração robótica, bem como o problema da adequação da maioria dos sistemas de medição em ambientes industriais são destacados. Consequentemente, o BMG-4 é introduzido como uma solução que satisfaz essas condições. Uma metodologia geométrica é definida para determinar a direção do eixo de um robô e para avaliar a sua precisão. Um protocolo que permite identificar os parâmetros geométricos angulares reais do robô, bem como os offsets de alguns eixos, é apresentado. Em seguida, uma estratégia é desenvolvida de maneira a identificar os valores de rigidez dos últimos cinco eixos do robô. Todos os testes são realizados no robô industrial ABB IRB 6600. Para os eixos 2 e 3, os valores máximos obtidos para a análise da imprecisão são 0,062° e 0,229°, respectivamente. Além disso, o robô apresenta erros de offset consideráveis. Para os eixos 4 e 5 esses valores são −0,99° e 0,83°. O valor combinado dos eixos 2 e 3 é −0,28°. A rigidez do eixo 2 é determinada, tendo um valor estimado de 2,4 × 106 N.m/rad. Finalmente, uma convenção standard de robôs é proposta e cuja finalidade é corrigir os erros previamente identificados através de um algoritmo de compensação global e independente do fabricante do robô considerado.
Książki na temat "DEFECT CORRECTION METHODS"
Diskin, Boris. Solving upwind-biased discretizations: Defect-correction iterations. Hampton, VA: Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1999.
Znajdź pełny tekst źródła1952-, Thomas James L., i Institute for Computer Applications in Science and Engineering., red. Solving upwind-biased discretizations: Defect-correction iterations. Hampton, VA: Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1999.
Znajdź pełny tekst źródła1952-, Thomas James L., i Institute for Computer Applications in Science and Engineering., red. Solving upwind-biased discretizations: Defect-correction iterations. Hampton, VA: Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1999.
Znajdź pełny tekst źródłaPeterson, Peter Jeffrey. Global error estimation using defect correction techniques for explicit Runge-Kutta methods. Toronto: University of Toronto, Dept. of Computer Science, 1986.
Znajdź pełny tekst źródłaA, Batterman, Sachs E. W i Institute for Computer Applications in Science and Engineering., red. Approximation of the Newton step by a defect correction process. Hampton, VA: Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1999.
Znajdź pełny tekst źródłaA, Batterman, Sachs E. W i Institute for Computer Applications in Science and Engineering., red. Approximation of the Newton step by a defect correction process. Hampton, VA: Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1999.
Znajdź pełny tekst źródłaArian, Eyal. Approximation of the Newton step by a defect correction process. Hampton, VA: Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1999.
Znajdź pełny tekst źródłaObuhova, Galina, i Galina Klimova. Fundamentals of public communication skills: practical recommendations. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1090527.
Pełny tekst źródłaBöhmer, K. Defect Correction Methods: Theory and Applications. Springer London, Limited, 2012.
Znajdź pełny tekst źródłaSolving upwind-biased discretizations: Defect-correction iterations. Hampton, VA: Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1999.
Znajdź pełny tekst źródłaCzęści książek na temat "DEFECT CORRECTION METHODS"
Auzinger, Winfried. "Defect Correction Methods". W Encyclopedia of Applied and Computational Mathematics, 323–32. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-540-70529-1_105.
Pełny tekst źródłaHackbusch, Wolfgang. "Extrapolation and Defect Correction Techniques". W Multi-Grid Methods and Applications, 277–92. Berlin, Heidelberg: Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-662-02427-0_14.
Pełny tekst źródłaHeinrichs, Wilhelm. "Defect Correction for Convection Dominated Flow". W Numerical methods for the Navier-Stokes equations, 111–20. Wiesbaden: Vieweg+Teubner Verlag, 1994. http://dx.doi.org/10.1007/978-3-663-14007-8_12.
Pełny tekst źródłaKoren, Barry. "Multigrid and Defect Correction for the Steady Navier-Stokes Equations". W Robust Multi-Grid Methods, 165–77. Wiesbaden: Vieweg+Teubner Verlag, 1989. http://dx.doi.org/10.1007/978-3-322-86200-6_15.
Pełny tekst źródłaKoren, Barry. "Low-Diffusion Rotated Upwind Schemes, Multigrid and Defect Correction for Steady, Multi-Dimensional Euler Flows". W Multigrid Methods III, 265–76. Basel: Birkhäuser Basel, 1991. http://dx.doi.org/10.1007/978-3-0348-5712-3_19.
Pełny tekst źródłaJuncu, Gh. "Preconditioned CG - Like Methods and Defect Correction for Solving Steady Incompressible Navier - Stokes Equations". W Notes on Numerical Fluid Mechanics (NNFM), 142–50. Wiesbaden: Vieweg+Teubner Verlag, 1995. http://dx.doi.org/10.1007/978-3-663-14125-9_12.
Pełny tekst źródłaSchuster, Thomas. "Approaches for defect correction". W The Method of Approximate Inverse: Theory and Applications, 89–103. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71227-5_9.
Pełny tekst źródłaDjambazov, Georgi S., Choi-Hong Lai, Koulis A. Pericleous i Zong-Kang Wang. "A Defect Correction Method for Multi-Scale Problems in Computational Aeroacoustics". W Lecture Notes in Computational Science and Engineering, 147–56. Berlin, Heidelberg: Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/978-3-642-56118-4_9.
Pełny tekst źródłaSpekreijse, S. P. "Second order accurate upwind solutions of the 2D steady Euler equations by the use of a defect correction method". W Lecture Notes in Mathematics, 285–300. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/bfb0072653.
Pełny tekst źródłaBibrowicz, Karol, Tomasz Szurmik, Anna Lipowicz i Andrzej W. Mitas. "Application of Original System to Support Specialist Physiotherapy D4S in Correction of Postural Defects as Compared to Other Methods—A Review". W Advances in Intelligent Systems and Computing, 187–99. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49666-1_15.
Pełny tekst źródłaStreszczenia konferencji na temat "DEFECT CORRECTION METHODS"
Kumar, Rohit, i Majnoo M. Gawture. "Defect Based Fatigue Life Predictions for Aluminum Castings". W Symposium on International Automotive Technology. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2024. http://dx.doi.org/10.4271/2024-26-0289.
Pełny tekst źródłaMalatesta, Giuliano, Andrea Meleddu, Robert Owen i Mures Zarea. "Extension of Current Defect Assessment Methods for Gouge and Corrosion Defects in X80 Grade Pipeline". W 2012 9th International Pipeline Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ipc2012-90613.
Pełny tekst źródłaLee, Jaehoon, Jinseon Kim, Dongguk Han, Seunghun Lee, Sunwoo Kim, Jingyeong Seol, Seungjin Lee i in. "A Failure Caused by Extended Cross-Defect in DRAM". W ISTFA 2023. ASM International, 2023. http://dx.doi.org/10.31399/asm.cp.istfa2023p0187.
Pełny tekst źródłaMarie, S., i M. Ne´de´lec. "A New Plastic Correction β for Underclad Defect in a Vessel Submitted to a Pressurised Thermal Shock". W ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93680.
Pełny tekst źródłaLombard, Jean-Pierre, Je´roˆme Dupeux, Christian Dupont, Francois Garcin i Ste´phane Baumhauer. "Mistuning Phenomena on Bladed Disk: Industrial Methods and Applications". W ASME Turbo Expo 2006: Power for Land, Sea, and Air. ASMEDC, 2006. http://dx.doi.org/10.1115/gt2006-90205.
Pełny tekst źródłaPukhova, Ekaterina, i Vladislav Vereshchagin. "Compensation of defects in printing process with histogram methods". W 10th International Symposium on Graphic Engineering and Design. University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design,, 2020. http://dx.doi.org/10.24867/grid-2020-p41.
Pełny tekst źródłaNeifeld, Mark A. "Computer generated holography for digital storage using sparse data words: capacity and error tolerance". W OSA Annual Meeting. Washington, D.C.: Optica Publishing Group, 1992. http://dx.doi.org/10.1364/oam.1992.thx4.
Pełny tekst źródłaWeber, Y., J. Goxe, S. Alves, T. Zirilli, M. Castignolles, S. Subramanian, Y. Tsang i K. Harber. "Advanced Failure Analysis on Silicon Pipeline Defects and Dislocations in Mixed-Mode Devices". W ISTFA 2014. ASM International, 2014. http://dx.doi.org/10.31399/asm.cp.istfa2014p0502.
Pełny tekst źródłaRoser, Christoph, i David Kazmer. "Flexible Design Methodology". W ASME 2000 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/detc2000/dfm-14016.
Pełny tekst źródłaFeng, Lv, Zhou Gengyu i Qian Haiyang. "Margins Assessment of Pressure-Temperature Limit Curves for a RPV". W ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-85145.
Pełny tekst źródłaRaporty organizacyjne na temat "DEFECT CORRECTION METHODS"
Vito, L. F. Di, G. Mannucci, G. Demofonti, G. Cumino, A. Izquierdo, F. Daguerre, H. Quintanille i M. Tivelli. CGX-00-003 Tenaris Double Joint for Deep Water Applications Subjected to Large Cyclic Plastic Strains. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), sierpień 1994. http://dx.doi.org/10.55274/r0011808.
Pełny tekst źródłaSemiga i Tiku. PR-214-104505-R02 Improved Methods for Estimating Remaining Fatigue Life of ERW Pipelines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), czerwiec 2015. http://dx.doi.org/10.55274/r0010204.
Pełny tekst źródłaPR-214-104505-R01 Improved Methods for Estimating Remaining Fatigue Life of ERW Pipe. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), październik 2011. http://dx.doi.org/10.55274/r0010744.
Pełny tekst źródła