Gotowe bibliografie tematyczne / Damage

Gotowa bibliografia na temat „Damage”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 7 września 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Spis treści

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Damage”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Damage"

1

Vafaei, Mohammadreza, Azlan bin Adnan i Mohammadreza Yadollahi. "Seismic Damage Detection Using Pushover Analysis". Advanced Materials Research 255-260 (maj 2011): 2496–99. http://dx.doi.org/10.4028/www.scientific.net/amr.255-260.2496.

Pełny tekst źródła
Streszczenie:
Inter-story drift ratio is a general damage index which is being used to detect damaged stories after severe ground motions. Since this general damage index cannot detect damaged elements also the severity of imposed damages on elements, a new real-time seismic damage detection method base on artificial neural networks was proposed to overcome this issue. This approach considers nonlinear behaviour of structures and not only is capable of detecting damaged elements but also can address the severity of imposed damages. Proposed algorithm was applied on a 3-story concrete building .The obtained results confirmed accuracy and robustness of this method.
Style APA, Harvard, Vancouver, ISO itp.
2

Ma, Hang, Ping Lu, Tao Jiang, Sheng Feng Shi, Jian Bin Wei i Jing Bo Duan. "Research on Feasibility and Applicability of Delamination Localization Methods for Composite Laminated Beams". Applied Mechanics and Materials 599-601 (sierpień 2014): 92–95. http://dx.doi.org/10.4028/www.scientific.net/amm.599-601.92.

Pełny tekst źródła
Streszczenie:
The feasibility and applicability of delamination damages localization methods with various defined damage indexes for the damaged composite laminated beam were studied. The results indicate that, for the modal strain energy method, damage indexes defined by strain energy difference are more effective to locate the delamination damage than that of strain energy ratio. For energy response method, damage index defined by the second difference can effectively locate the delamination damage in the composite laminated beams.
Style APA, Harvard, Vancouver, ISO itp.
3

Gunji, Yukio-Pegio, Tomohiro Shirakawa, Takayuki Niizato, Taichi Haruna i Igor Balaz. "Life Driven by Damaged Damage". Progress of Theoretical Physics Supplement 173 (2008): 26–37. http://dx.doi.org/10.1143/ptps.173.26.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Liu, Wei Ran, Shou Jun Du i Li Mei Zhang. "Damage Identification of Plane Truss Structure According to Square Difference in Elemental Modal Strain". Applied Mechanics and Materials 724 (styczeń 2015): 22–27. http://dx.doi.org/10.4028/www.scientific.net/amm.724.22.

Pełny tekst źródła
Streszczenie:
A method based on the square difference of elemental modal strain was proposed to determine the damage location and damage degree. The square difference of elemental modal strain was expressed damage before and after. Simulation results show that: this method is effective to locate the single, multiple damages and light, severe damage with low-order modal information. Damage degrees can be initially determined by the values of the square difference of damaged-element modal strain. Furthermore, the result also shows that this method can accurately identify the damage location of plane truss structures with noise.
Style APA, Harvard, Vancouver, ISO itp.
5

Junior, Valdir Mariucci, Luciana Harumi Shigueoka, Carlos Theodoro Motta Pereira, Fernando Cesar Carducci, Tumoru Sera i Gustavo Hiroshi Sera. "Resistance to frost in Arabica coffee lines introgressed with Coffea racemosa Lour. genes". March 2022, nr 16(03):2022 (1.03.2022): 338–42. http://dx.doi.org/10.21475/ajcs.22.16.03.p2925.

Pełny tekst źródła
Streszczenie:
The aim of this study was to assess resistance to frost in Arabica coffees with introgression of Coffea racemosa. The field experiment (Londrina, Paraná, Brazil) was assessed after two consecutive frosts in June 2011. Eleven F2BC5 Arabica coffee lines with introgression of C. racemosa were assessed 52 months after planting. C. arabica cultivars IAPAR 59, Tupi IAC 1669-33, Catuaí Vermelho IAC 99 and Mundo Novo IAC 376-4 were used as sensitive controls. Foliar damages assessments were carried out 20 days after exposure to freezing temperatures. Foliar damages were scored using grades ranging from 1 to 5, where: grade 1 = no damage; and 5 grade = from 75.01 to 100.00% damaged leaf area. Levels of foliar damage (e.g. no damage – very severe damages) were classified according to the mean grades of the assessments. Severe leaf damage was observed in the controls, while nine lines showed moderate damage. H0107-32 line is the most resistant to frost, and is the only one which presented slight leaf damage
Style APA, Harvard, Vancouver, ISO itp.
6

Guo, Jiamin, Jiongliang Wu, Junhua Guo i Zhiyu Jiang. "A Damage Identification Approach for Offshore Jacket Platforms Using Partial Modal Results and Artificial Neural Networks". Applied Sciences 8, nr 11 (6.11.2018): 2173. http://dx.doi.org/10.3390/app8112173.

Pełny tekst źródła
Streszczenie:
This paper presents a damage identification method for offshore jacket platforms using partially measured modal results and based on artificial intelligence neural networks. Damage identification indices are first proposed combining information of six modal results and natural frequencies. Then, finite element models are established, and damages in structural members are assumed by reducing the structural elastic modulus. From the finite element analysis for a training sample, both the damage identification indices and the damages are obtained, and neural networks are trained. These trained networks are further tested and used for damage prediction of structural members. The calculation results show that the proposed method is quite accurate. As the considered measurement points of the jacket platform are near the waterline, the prediction errors keep below 8% when the damaged members are close to the waterline, but may rise to 16.5% when the damaged members are located in deeper waters.
Style APA, Harvard, Vancouver, ISO itp.
7

Yuan, Xiaoqing, Naqash Azeem, Azka Khalid i Jahanzeb Jabbar. "Vibration Energy at Damage-Based Statistical Approach to Detect Multiple Damages in Roller Bearings". Applied Sciences 12, nr 17 (26.08.2022): 8541. http://dx.doi.org/10.3390/app12178541.

Pełny tekst źródła
Streszczenie:
This study proposes a statistical approach based on vibration energy at damage to detect multiple damages occurring in roller bearings. The analysis was performed at four different rotating speeds—1002, 1500, 2400, and 3000 RPM—following four different damages—inner race, outer race, ball, and combination damage—and under two types of loading conditions. These experiments were performed on a SpectraQuest Machinery Fault Simulator™ by acquiring the vibration data through accelerometers under two operating conditions: with the bearing loader on the rotor shaft and without the bearing loader on the rotor shaft. The histograms showed diversity in the defected bearing as compared to the intact bearing. There was a marked increase in the kurtosis values of each damaged roller bearing. This research article proposes that histograms, along with kurtosis values, represent changes in vibration energy at damage that can easily detect a damaged bearing. This study concluded that the vibration energy at damage-based statistical technique is an outstanding approach to detect damages in roller bearings, assisting Industry 4.0 to diagnose faults automatically.
Style APA, Harvard, Vancouver, ISO itp.
8

Kizha, Anil Raj, Evan Nahor, Noah Coogen, Libin T. Louis i Alex K. George. "Residual Stand Damage under Different Harvesting Methods and Mitigation Strategies". Sustainability 13, nr 14 (8.07.2021): 7641. http://dx.doi.org/10.3390/su13147641.

Pełny tekst źródła
Streszczenie:
A major component of sustainable forest management are the stands left behind after the logging operation. Large mechanized harvesting equipment involved in current forest management can inflict damage on residual trees; and can pose a risk of mortality from diseases, natural calamities, and/or degrade future economic value. The primary objective of this study was to evaluate the residual stand damage under different harvesting methods and silvicultural prescriptions i.e., crop tree release (CTR), diameter limit cut (DLC), and overstory removal (OSR). The second objective was to evaluate the intensity and frequency of damage occurring on the bole, canopy, and root at tree and stand level. The third objective was to document strategies adopted globally to minimize stand damage due to timber harvesting. Five harvest blocks implementing three silvicultural prescriptions, were selected as the treatments across two different industrial timberlands in central and northern Maine (Study Site (SS) I and II, respectively). A hybrid cut-to-length (Hyb CTL) and whole-tree (WT) harvesting method were employed for conducting the harvest in SS I and II, respectively. Systematic transect sampling was employed to collect information on type, frequency, and intensity of damages. The inventory captured 41 and 8 damaged trees per hectare with 62 and 22 damages per hectare from SS I and SS II respectively. Bole damage was the most frequent damage across all treatments. The Hyb CTL had lower damage density (damage per ha) and severity compared to WT. The average number of trees damaged per ha was higher for CTR prescriptions compared to DLC. There were no significant differences in the height of the damages from the ground level between treatments within each study site; however, there was a significant difference between the study sites. Species damaged was directly related to the residual trees left behind and was dominated by American beech, yellow birch, sugar maple, and eastern hemlock. Finally, the study provides strategies that can be adopted at different forest managerial phases to mitigate residual stand damage.
Style APA, Harvard, Vancouver, ISO itp.
9

Dhokane, Mr Rahul. "CAR DAMAGE DETECTION USING CNN". INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, nr 04 (12.04.2024): 1–5. http://dx.doi.org/10.55041/ijsrem30508.

Pełny tekst źródła
Streszczenie:
In today's modern society, automobiles play a crucial role, and the automatic classification of car damages holds particular significance for the auto insurance industry. Our proposed solution involves the implementation of two Convolutional Neural Network (CNN) models. Specifically, the VGG16 model is employed to identify and assess the location and severity of car damage, while the Mask R-CNN is utilized to accurately mask the damaged regions. Both models collectively provide valuable insights into the extent. The CNN models effectively filter out images without damages, allowing only those with identified damage to be passed on to the object detection model. This strategic approach enhances the overall performance of the model. The core objective of this research project is to achieve maximum accuracy through the utilization of CNN models. TensorFlow, Key Words: E-commerce, Car Damage, Detection, Classification, VGG, Mask RCNN, Severity, Location, Masking
Style APA, Harvard, Vancouver, ISO itp.
10

Dhakal, Rajesh P. "Damage to non-structural components and contents in 2010 Darfield earthquake". Bulletin of the New Zealand Society for Earthquake Engineering 43, nr 4 (31.12.2010): 404–11. http://dx.doi.org/10.5459/bnzsee.43.4.404-411.

Pełny tekst źródła
Streszczenie:
This paper describes the performance of (or damage to) non-structural components and contents in buildings during the 4th September 2010 Darfield (Canterbury) earthquake and the subsequent aftershocks. Even in buildings with little damage to their structural systems, non-structural and content damages were significant; and these damages were reported to have increased during the aftershocks (especially those of magnitude 5 and higher). Most commonly damaged non-structural components were brick chimneys, parapets, ceilings, facades, internal walls and windows. The nature and extent of damages in each of these components are discussed in this paper with the help of typical damage photos taken after the earthquake. The extent of content damage in a building was dependent on its usage; typically buildings using racks/shelves for displaying commodities (such as library, departmental stores, liquor shops etc) suffered significantly greater loss from content damage than residential houses, office buildings and other types of commercial buildings.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Damage"

1

Jackson, Robert. "Thresholds of damage for properties damaged by ground subsidence". Thesis, Nottingham Trent University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.324729.

Pełny tekst źródła
Streszczenie:
This study has investigated thresholds of damage for privately owned low-rise residential properties damaged by ground subsidence or heave movement. The primary focus of the research objectives has been the uncertainties created by subsidence damage. The study investigates thresholds of damage that can be used to assess the remedial action necessary for low-rise residential properties damaged by ground subsidence or heave movement. After investigating thresholds of damage, the study subsequently considers the implications that thresholds of damage would create if applied in practice. The research was carried out through the collection and analysis of 236 case study properties. Each case study represents a privately owned low-rise residential property that was thought to have been damaged by ground subsidence or heave movement. The research has considered properties damaged by subsidence or heave movement caused by leaking drains, clay subsoil shrinkage or expansion and subsidence caused by coal-mining. Case study information has been gathered from a variety of sources, using data collected by professionally qualified chartered engineers, surveyors or other specialists. In addition to these case studies, the research has employed semi-structured interviews in order to consider the implications that thresholds of damage would create if applied in practice. The research found that the evaluation of visible damage is a highly subjective matter and that any thresholds based upon an assessment of visible damage are an unreliable method to consider whether or not a property requires substantive repairs. The most robust threshold of damage which is found to emerge was to evaluate whether or not the movement causing the damage in the property is long-term progressive. The consequences of implementing this threshold of damage have been investigated. It has been concluded that if this threshold of damage was adopted, it could lead to both reductions in payments necessary to repair subsidence or heave damage and it could also reduce some of the uncertainties associated with subsidence.
Style APA, Harvard, Vancouver, ISO itp.
2

Kelley, Donald M. "The integration of nonstructural methods into flood loss reduction programs : an evaluation of a remaining obstacle /". This resource online, 1986. http://scholar.lib.vt.edu/theses/available/etd-08222008-063409/.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

York, Brenna Nicole. "REASONABLE DAMAGE". Miami University / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=miami1407149432.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Sunter, Nicola. "DNA Damage Responses". Thesis, University of Newcastle Upon Tyne, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.489314.

Pełny tekst źródła
Streszczenie:
The histone H2AX has been established as a reliable biomarker of DNA damage, becoming phosphorylated rapidly following damage in discrete foci which can be correlated with DNA DSB number. In the present study, the phosphorylation of H2AX was used as a marker of DNA DSB damage to compare and contrast the damage induced by ionizing radiation, the topo II poison, etoposide, and the topo II catalytic inhibitor, ICRF-193. To examine the DNA damage numbers at time-points in the 24 hours following exposure to these damaging agents. Topo lIP null cells were used to investigate the contribution of topo II a and Pthese damage responses and the Trapped in Agarose DNA Immunostaining assay was utilised to quantify the numbers of topo II_DNA complexes formed in response to these agents. This study aimed to examine the levels of DNA damage following exposure to these damaging agents and to investigate differences in the complement of proteins associated with DNA damage-induced foci. By using both the y-H2AX and TARDIS assays and protein colocalisation techniques, the studies detailed here presents novel findings on the differing damage responses induced following these three agents.
Style APA, Harvard, Vancouver, ISO itp.
5

Kanich, Ondřej. "Fingerprint Damage Simulation". Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2014. http://www.nusl.cz/ntk/nusl-236148.

Pełny tekst źródła
Streszczenie:
Cílem této práce je návrh a implementace aplikace pro simulaci poškození umělého otisku prstu. Při studiu jsem se soustředil hlavně na projekt SFinGe, který je průkopníkem v této oblasti. Specifikoval jsem přesněji oblast zájmu na optický či kapacitní senzor a poškození otisků prstů v závislosti na tlaku a vlhkosti, poškození a pošpinění senzoru a deformaci pokožky. Navrhl jsem způsob implementace těchto vlivů poškozujících umělý otisk prstu tak, aby se lépe podobal reálným otiskům. Tyto metody využívají morfologické operátory a model plastického zkreslení u otisků prstů. Výsledky nejúspěšnějších metod mají o 62.5% horší skóre v komerčním produktu oproti originálu a o jednu třídu horší hodnocení dle normy pro kvalitu obrazu otisku prstu. Přínosem této práce je tedy poškození umělých otisků tak, že prokazatelně dosahují horších výsledků než originál a návrh aplikace, která umožňuje rozšíření o další metody.
Style APA, Harvard, Vancouver, ISO itp.
6

Bandini, Chiara. "FE-numerical modelling of damage in wood using continuum damage mechanics". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018.

Znajdź pełny tekst źródła
Streszczenie:
In this thesis, the mechanical behavior of a timber joint has been studied. The main task is to model the mechanical behavior of the joint as good as possible. To be able to solve the numerical instabilities of the timber joints, a deeper look needs to be done to the modelling of the wooden material and the steel wood contact. For this thesis a previously developed 3D numerical damage model of wood has been studied. This model has been elaborated by Sandhaas(2012) and it describes crack initiation and propagation of the material based on the concepts of continuum damage mechanics. The basic material model of wood has been implemented as a user material in the UMAT subroutine of ABAQUS. The developed model is giving some numerical instabilities due to the extreme distortion of the elements. During this thesis the model has been enhanced in order to be able to represent the mechanical behavior of wood as good as possible and solve the problem of the model. The modelling outcomes were compared to the results obtained by experimental tests (ref. to Sandaas,2012).The results showed that the first model, a tension test parallel-to grain, had been enhanced. Indeed the results got closer to the experimental value than the original model’s results did. The second model represented a timber joint with slotted-in steel plate with a dowel. The analysis were done with different wood spieces (spruce, beech and azobè). Regarding the spruce, the analysis reached fairly accurate results concerning the capacity load but they were less precise regarding the displacement and the stiffness. The prediction quality was rather poor for the other two species, beech and azobè. It is necessary to find other ways to further enhance the model.Even today a model that is able to represent all three fields (stiffness, capacity load and displacement) accurately doesn’t exist. Good results of one of these lead to bad results of the others. Modelling wood then still represents an evolving challenge.
Style APA, Harvard, Vancouver, ISO itp.
7

Dixit, Akash. "Damage modeling and damage detection for structures using a perturbation method". Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/43575.

Pełny tekst źródła
Streszczenie:
This thesis is about using structural-dynamics based methods to address the existing challenges in the field of Structural Health Monitoring (SHM). Particularly, new structural-dynamics based methods are presented, to model areas of damage, to do damage diagnosis and to estimate and predict the sensitivity of structural vibration properties like natural frequencies to the presence of damage. Towards these objectives, a general analytical procedure, which yields nth-order expressions governing mode shapes and natural frequencies and for damaged elastic structures such as rods, beams, plates and shells of any shape is presented. Features of the procedure include the following: 1. Rather than modeling the damage as a fictitious elastic element or localized or global change in constitutive properties, it is modeled in a mathematically rigorous manner as a geometric discontinuity. 2. The inertia effect (kinetic energy), which, unlike the stiffness effect (strain energy), of the damage has been neglected by researchers, is included in it. 3. The framework is generic and is applicable to wide variety of engineering structures of different shapes with arbitrary boundary conditions which constitute self adjoint systems and also to a wide variety of damage profiles and even multiple areas of damage. To illustrate the ability of the procedure to effectively model the damage, it is applied to beams using Euler-Bernoulli and Timoshenko theories and to plates using Kirchhoff's theory, supported on different types of boundary conditions. Analytical results are compared with experiments using piezoelectric actuators and non-contact Laser-Doppler Vibrometer sensors. Next, the step of damage diagnosis is approached. Damage diagnosis is done using two methodologies. One, the modes and natural frequencies that are determined are used to formulate analytical expressions for a strain energy based damage index. Two, a new damage detection parameter are identified. Assuming the damaged structure to be a linear system, the response is expressed as the summation of the responses of the corresponding undamaged structure and the response (negative response) of the damage alone. If the second part of the response is isolated, it forms what can be regarded as the damage signature. The damage signature gives a clear indication of the damage. In this thesis, the existence of the damage signature is investigated when the damaged structure is excited at one of its natural frequencies and therefore it is called ``partial mode contribution". The second damage detection method is based on this new physical parameter as determined using the partial mode contribution. The physical reasoning is verified analytically, thereupon it is verified using finite element models and experiments. The limits of damage size that can be determined using the method are also investigated. There is no requirement of having a baseline data with this damage detection method. Since the partial mode contribution is a local parameter, it is thus very sensitive to the presence of damage. The parameter is also shown to be not affected by noise in the detection ambience.
Style APA, Harvard, Vancouver, ISO itp.
8

Lie, Simon Charles. "Damage resistance and damage tolerance of thin composite facesheet honeycomb panels". Thesis, Massachusetts Institute of Technology, 1989. http://hdl.handle.net/1721.1/41236.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Lloyd, James C. "Impact damage and damage tolerance of fibre reinforced advanced composite laminate structures". Thesis, Loughborough University, 2002. https://dspace.lboro.ac.uk/2134/6891.

Pełny tekst źródła
Streszczenie:
The primary objective of this work is to experimentally examine the effect of various geometric parameters on the impact damage and damage tolerance of thin carbon/epoxy plate and panel structures. Due to the number of parameters involved in a low velocity impact event and the complexity of the damage created, determining what effect individual parameters have is extremely demanding, especially when some of the parameters may even be coupled. However, by experimentally simulating in a controlled manner, either the impact event or the damage created, the effect of individual geometric parameters can be isolated and determined. A quasi-static indentation test has been used to simulate an impact event. The parameters of indenter size, nose shape, plate size and boundary condition, were examined. Four different plate failure modes were identified. Indenter nose shape was found to be the dominant geometric parameter, as a change in nose shape resulted in a change in failure mode and hence maximum load. From this work, a set of geometric parameters was selected for impact testing. Impact testing at various Incident Kinetic Energies (IKE) was performed on an instrumented drop weight impact rig. From examination of internal and external damage, the development of damage to increasing IKE was determined and shown to have four distinctive phases. Coupled with strike and rebound velocity measurementsa, non-linear relationship between IKE-damage area was established and a delamination threshold energy level of 1.1 J was calculated. Damaget olerance assessmenot f impacted panels was then performed in a Compression-After- Impact (CAI) rig. Strain gauge responses allowed global and local behaviour to be compared to intact specimens. It was found that once a critical damage size was surpassed, a gradual nonlinear degradation in compressive strength was observed until a point was reached where no further degradation in performance was attained. Furthermore, propagation of internal damage in a stable and unstable manner was directly linked to the nature of sublaminate buckling behaviour. Damaget olerance assessmenot f artificially delaminatedp anels loaded in compressionw as then performed. A single artificial delamination of various size, shape and orientation, embedded at the centre of a panel was examined. Delamination width was found to be the dominant geometric parameter. Hence, when comparing a circular delamination to an elliptical one of the same area, the effect of orientation and shape is aspect ratio dependent. Finally, a comparison of impacted and artificially delaminated panels was made.
Style APA, Harvard, Vancouver, ISO itp.
10

Preisler, Andreas [Verfasser]. "Efficient Damage Detection and Assessment Based on Structural Damage Indicators / Andreas Preisler". Düren : Shaker, 2020. http://d-nb.info/1205239669/34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Damage"

1

Brogan, Jacqueline Vaught. Damage. Notre Dame, IN: University of Notre Dame Press, 2003.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

HART, JOSEPHINE. Damage. London: Random House Publishing Group, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Binoche, Juliette. Damage. [United States]: Warner Home Video, 2011.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Kumar, Amrita. Damage. New Delhi: HarperCollins Publishers India, a joint venture with India Today Group, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Magee, Joe. Damage. [Manchester]: Periphery, 1997.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Lescroart, John T. Damage. Detroit: Thorndike Press, 2011.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Kumar, Amrita. Damage. New Delhi: HarperCollins Publishers India, a joint venture with India Today Group, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Stevenson, Robin. Damage. Victoria, B.C: Orca Book Publishers, 2013.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Jenkins, A. M. Damage. New York: HarperCollins, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Hart, Josephine. Damage. New York: Knopf, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Damage"

1

Frémond, Michel. "Damage. Gradient of Damage". W Non-Smooth Thermomechanics, 313–57. Berlin, Heidelberg: Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/978-3-662-04800-9_12.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Bährle-Rapp, Marina. "damage". W Springer Lexikon Kosmetik und Körperpflege, 140. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_2624.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Busnelli, Francesco D., Giovanni Comandé, Herman Cousy, Dan B. Dobbs, Bill W. Dufwa, Michael G. Faure, Israel Gilead i in. "Damage". W Principles of European Tort Law, 24–42. Vienna: Springer Vienna, 2005. http://dx.doi.org/10.1007/3-211-27751-x_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Frémond, Michel. "Damage". W Lecture Notes of the Unione Matematica Italiana, 101–7. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-24609-8_6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Mani, M., i C. Shivaraju. "Damage". W Mealybugs and their Management in Agricultural and Horticultural crops, 117–22. New Delhi: Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2677-2_9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Walker, Stuart. "Damage". W Design Realities, 66. spirit / Stuart Walker. Description: First edition. |: Routledge, 2018. http://dx.doi.org/10.4324/9780429489037-30.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

François, Dominique, André Pineau i André Zaoui. "Damage". W Mechanical Behaviour of Materials, 85–249. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-017-0498-4_2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Weik, Martin H. "damage". W Computer Science and Communications Dictionary, 335. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_4145.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Arnold, Lorna. "Damage Assessment and Damage Control". W Windscale 1957, 60–76. London: Palgrave Macmillan UK, 1992. http://dx.doi.org/10.1007/978-1-349-10582-3_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Arnold, Lorna. "Damage Assessment and Damage Control". W Windscale 1957, 60–76. London: Palgrave Macmillan UK, 1995. http://dx.doi.org/10.1007/978-1-349-24008-1_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Damage"

1

Lestari, W., i S. Hanagud. "Damage Detection Using Experimental Data Based Methods". W ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1724.

Pełny tekst źródła
Streszczenie:
Abstract The objective of this work is to develop a damage detection algorithm, which is based on experimentally identified data and a mathematical relation between the damage information and the changes in structural dynamic characteristics. The relation is derived in the form of a differential equation, which relate the damage information, natural frequency changes, and the modes of the undamaged and damaged structure. The curvature mode is chosen in this method due to its sensitivity to the presence of the damage and its localized information. The detection algorithm enables one to locate the damages and to obtain the corresponding magnitudes simultaneously. For illustration of the methods numerical simulation on damaged beams were conducted. The damages were considered as point damages. Numerical simulation results are presented.
Style APA, Harvard, Vancouver, ISO itp.
2

Rubenchik, Alexander M., i Michael D. Feit. "Initiation, growth, and mitigation of UV-laser-induced damage in fused silica". W Boulder Damage, redaktorzy Gregory J. Exarhos, Arthur H. Guenther, Keith L. Lewis, M. J. Soileau i Christopher J. Stolz. SPIE, 2002. http://dx.doi.org/10.1117/12.461680.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

During, Annelise, Caroline Fossati i Mireille Commandre. "Development of a photothermal microscope for multiscale studies of defects". W Boulder Damage, redaktorzy Gregory J. Exarhos, Arthur H. Guenther, Keith L. Lewis, M. J. Soileau i Christopher J. Stolz. SPIE, 2002. http://dx.doi.org/10.1117/12.461681.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Ouderkirk, Andrew J. "Design and characterization of all-polymeric interference mirrors and optics". W Boulder Damage, redaktorzy Gregory J. Exarhos, Arthur H. Guenther, Keith L. Lewis, M. J. Soileau i Christopher J. Stolz. SPIE, 2002. http://dx.doi.org/10.1117/12.461682.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Bouchut, Philippe, Pierre Garrec, Jerome Neauport, Philippe Gacoin, Francis Bonnemason i S. Kaladgew. "Technological processing of silica as seen through laser-induced damage tests". W Boulder Damage, redaktorzy Gregory J. Exarhos, Arthur H. Guenther, Keith L. Lewis, M. J. Soileau i Christopher J. Stolz. SPIE, 2002. http://dx.doi.org/10.1117/12.461683.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Ravel, Guillaume, Philippe Bouchut, Pierre Garrec, Bernard Andre, Carol Le Diraison i Herve Bercegol. "Influence of storage conditions on the LIDT of very high damage resistance mirrors". W Boulder Damage, redaktorzy Gregory J. Exarhos, Arthur H. Guenther, Keith L. Lewis, M. J. Soileau i Christopher J. Stolz. SPIE, 2002. http://dx.doi.org/10.1117/12.461684.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Troitski, Igor N. "Method and laser system for creating high-resolution laser-induced damage images". W Boulder Damage, redaktorzy Gregory J. Exarhos, Arthur H. Guenther, Keith L. Lewis, M. J. Soileau i Christopher J. Stolz. SPIE, 2002. http://dx.doi.org/10.1117/12.461696.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Grua, Pierre, J. Morreeuw i Herve Bercegol. "Kinetic study of laser damage initiation by creation of an electron plasma from absorbing nano-inclusions". W Boulder Damage, redaktorzy Gregory J. Exarhos, Arthur H. Guenther, Keith L. Lewis, M. J. Soileau i Christopher J. Stolz. SPIE, 2002. http://dx.doi.org/10.1117/12.461685.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Lamaignere, Laurent, V. Cavarro, C. Allais, D. Bernardino, Michel A. Josse i Herve Bercegol. "Time-resolved measurements of reflectivity, plasma formation, and damage of hafnia/silica multilayer mirrors at 1064 nm". W Boulder Damage, redaktorzy Gregory J. Exarhos, Arthur H. Guenther, Keith L. Lewis, M. J. Soileau i Christopher J. Stolz. SPIE, 2002. http://dx.doi.org/10.1117/12.461686.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Pinot, B., Herve Leplan, Francois Houbre, Eric Lavastre, Jean-Christophe Poncetta i Genevieve Chabassier. "Laser megajoule 1.06-μm mirror production with very high laser damage threshold". W Boulder Damage, redaktorzy Gregory J. Exarhos, Arthur H. Guenther, Keith L. Lewis, M. J. Soileau i Christopher J. Stolz. SPIE, 2002. http://dx.doi.org/10.1117/12.461687.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Damage"

1

Gorton, Gary, i Toomas Laarits. Collateral Damage. Cambridge, MA: National Bureau of Economic Research, luty 2018. http://dx.doi.org/10.3386/w24298.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Murray, J. G., i G. E. Gorker. Tokamak ARC damage. Office of Scientific and Technical Information (OSTI), styczeń 1985. http://dx.doi.org/10.2172/6101616.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Frame, B. J., C. J. Janke, W. A. Simpson, Jr., R. E. Ziegler i H. E. Philpot. Composite heat damage. Office of Scientific and Technical Information (OSTI), maj 1990. http://dx.doi.org/10.2172/6949632.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Heidrich, Brenden, i Kelley Verner. Neutron Damage Calculator. Office of Scientific and Technical Information (OSTI), sierpień 2018. http://dx.doi.org/10.2172/1968150.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Barashev, Aleksandr, i Stanislav I. Golubov. Unlimited Damage Accumulation in Metallic Materials Under Cascade-Damage Conditions. Office of Scientific and Technical Information (OSTI), wrzesień 2008. http://dx.doi.org/10.2172/939148.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Mueller, G. P. The Inadequacies of Damage Energy as a Measure of Displacement Damage. Fort Belvoir, VA: Defense Technical Information Center, kwiecień 1989. http://dx.doi.org/10.21236/ada207376.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Auden, Elizabeth Catherine. Basic Mechanisms: Displacement Damage. Office of Scientific and Technical Information (OSTI), czerwiec 2019. http://dx.doi.org/10.2172/1524360.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Auden, Elizabeth Catherine. Test Standards: Displacement Damage. Office of Scientific and Technical Information (OSTI), czerwiec 2019. http://dx.doi.org/10.2172/1524361.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Black, Hugh C. Animal damage management handbook. Portland, OR: U.S. Department of Agriculture, Forest Service, Pacific Northwest Research Station, 1994. http://dx.doi.org/10.2737/pnw-gtr-332.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Schulson, Erland M. Ice Damage to Concrete. Fort Belvoir, VA: Defense Technical Information Center, kwiecień 1998. http://dx.doi.org/10.21236/ada351076.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Damage” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii