Gotowe bibliografie tematyczne / Cutting metals

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Cutting metals”

Autor: Grafiati
Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Cutting metals”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Cutting metals"

1

Schulz, W., G. Simon, H. M. Urbassek i I. Decker. "On laser fusion cutting of metals". Journal of Physics D: Applied Physics 20, nr 4 (14.04.1987): 481–88. http://dx.doi.org/10.1088/0022-3727/20/4/013.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Li, Z. J., F. Z. Fang, Hu Gong i X. D. Zhang. "Review of diamond-cutting ferrous metals". International Journal of Advanced Manufacturing Technology 68, nr 5-8 (17.04.2013): 1717–31. http://dx.doi.org/10.1007/s00170-013-4970-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Saei, Mojib, Anirudh Udupa, Koushik Viswanathan, Tatsuya Sugihara, Rachid M’Saoubi i Srinivasan Chandrasekar. "Controlling segmentation in cutting of metals". CIRP Annals 68, nr 1 (2019): 41–44. http://dx.doi.org/10.1016/j.cirp.2019.04.073.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

NISHIGUCHI, Takashi, i Masami MASUDA. "Precision cutting of ferreous metals with single crystal CBN cutting tools." Journal of the Japan Society for Precision Engineering 54, nr 2 (1988): 384–89. http://dx.doi.org/10.2493/jjspe.54.384.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Et al., Akhmedov Akrom Burkhanovich. "Imitating Simulation of Thermomechanical Processing of Metals". Turkish Journal of Computer and Mathematics Education (TURCOMAT) 12, nr 4 (11.04.2021): 31–36. http://dx.doi.org/10.17762/turcomat.v12i4.462.

Pełny tekst źródła
Streszczenie:
Thermomechanical processing of metals by cutting is a complicated technological problem that is difficult for mathematical simulation. The various phenomena observed in this process are so closely intertwined with each other and their interaction is so complex that eleven relatively independent theories not coming yet to a holistic unity are focused on the cutter edge. These are a theory of chip formation, metal cutting mechanics, a friction theory in metalworking, thermodynamics of cutting, a theory of wear and resistance of cutting tools. A mesh-free method of Smoothed Particle Hydrodynamics (SPH) has been used for simulation in this paper. The SPH-based simulation in LS-DYNA is performed to predict cutting forces and plastic deformations for machining processing of metals by cutting. The results characterizing the distribution patterns of the strain tensor components and the temperature field at different points in time and space have been presented. The performed studies have demonstrated that it is possible to use changes in the temperature fields as a criterion for estimating the elastic-plastic deformations.
Style APA, Harvard, Vancouver, ISO itp.
6

Caprino, G., i L. Nele. "Cutting Forces in Orthogonal Cutting of Unidirectional GFRP Composites". Journal of Engineering Materials and Technology 118, nr 3 (1.07.1996): 419–25. http://dx.doi.org/10.1115/1.2806829.

Pełny tekst źródła
Streszczenie:
The results of orthogonal cutting tests carried out on unidirectional glass fiber reinforced plastic composites, using HSS tools, are presented and discussed. During the tests, performed on a milling machine at very low cutting speed to avoid thermal effects, the cutting speed was held constant and parallel to the fibre direction. Three parameters, namely the tool rake angle α, the tool relief angle γ, and the depth of cut t, were varied. According to the experimental results, the horizontal force per unit width, Fhu, undergoes a dramatic decrease, never verified for metals, with increasing α. Besides, Fhu is only negligibly affected by the relief angle, and linearly increases with t. Similarly to metals, an effect of the depth of cut on the specific energy (size effect) is found also for composites. However, the presented results indicate that the size effect can be analytically modeled in a simple way in the case of composites. The vertical force per unit width, Fvu, exhibits a marked reduction when the relief angle is increased. Fvu, is also very sensitive to the rake angle: the lower α the higher is Fvu. It is shown that this behavior probably reflects a strong influence of the rake angle on the forces developing at the flank. A linear dependence of the vertical force on the depth of cut is also demonstrated. Finally, the experimental data are utilized to obtain empirical formulae, allowing an approximate evaluation of cutting forces.
Style APA, Harvard, Vancouver, ISO itp.
7

Sýkorová, Libuše, Oldřich Šuba, Vladimír Pata i Milena Kubišová. "Structural Changes in Metals during Laser Cutting". Materials Science Forum 919 (kwiecień 2018): 25–33. http://dx.doi.org/10.4028/www.scientific.net/msf.919.25.

Pełny tekst źródła
Streszczenie:
The presented paper deals with the problems associated with laser machining of metal materials. Specifically, it solves the question of structural changes that occur as a result of the transfer of heat to the material. Experimental machining of selected technical materials was carried out, and on the basis of the hardness measurement near the cutting point, the heat-affected zone was evaluated after passing the laser beam. To confirm the detection of the affected zone width the models of transient temperature field were arranged, to represent the distribution of temperature in the vicinity of the cutting edge.
Style APA, Harvard, Vancouver, ISO itp.
8

Udupa, Anirudh, Koushik Viswanathan, Yeung Ho i Srinivasan Chandrasekar. "The cutting of metals via plastic buckling". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 473, nr 2202 (czerwiec 2017): 20160863. http://dx.doi.org/10.1098/rspa.2016.0863.

Pełny tekst źródła
Streszczenie:
The cutting of metals has long been described as occurring by laminar plastic flow. Here we show that for metals with large strain-hardening capacity, laminar flow mode is unstable and cutting instead occurs by plastic buckling of a thin surface layer. High speed in situ imaging confirms that the buckling results in a small bump on the surface which then evolves into a fold of large amplitude by rotation and stretching. The repeated occurrence of buckling and folding manifests itself at the mesoscopic scale as a new flow mode with significant vortex-like components—sinuous flow. The buckling model is validated by phenomenological observations of flow at the continuum level and microstructural characteristics of grain deformation and measurements of the folding. In addition to predicting the conditions for surface buckling, the model suggests various geometric flow control strategies that can be effectively implemented to promote laminar flow, and suppress sinuous flow in cutting, with implications for industrial manufacturing processes. The observations impinge on the foundations of metal cutting by pointing to the key role of stability of laminar flow in determining the mechanism of material removal, and the need to re-examine long-held notions of large strain deformation at surfaces.
Style APA, Harvard, Vancouver, ISO itp.
9

Orishich, Anatoliy, Victor Shulyatyev, Alexander Golyshev i Alexander Malikov. "Thermophysical problems of laser cutting of metals". MATEC Web of Conferences 115 (2017): 08004. http://dx.doi.org/10.1051/matecconf/201711508004.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Vizureanu, Petrica. "Surface Treatment of Metals". Coatings 12, nr 5 (20.04.2022): 560. http://dx.doi.org/10.3390/coatings12050560.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Cutting metals"

1

Gekonde, Haron Ogega. "Influence of dynamic behaviour of materials on machinability". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0002/NQ42737.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Shi, Bin 1966. "Identification of the material constitutive equation for simulation of the metal cutting process". Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=115709.

Pełny tekst źródła
Streszczenie:
This study presents a novel methodology to characterize material plastic behavior within a practical range of stresses, strains, strain rates, and temperatures encountered in the metal cutting process. The methodology is based on integrating a newly developed analytical model with quasi-static tests and orthogonal cutting experiments that incorporate a laser heating system. Friction and heat transfer models are developed to describe the tribological and thermal interactions at the tool-chip interface. These models are implemented in a FEM package in order to improve the accuracy of the simulation of the machining process.
The new analytical model, which is developed to predict the distributions of the stress, the strain, the strain rate, and the temperature in the primary shear zone, is based on conceptual considerations, as well as characterization of the plastic deformation process through comprehensive FEM simulations.
Orthogonal cutting experiments at room temperature and preheated conditions were carefully designed. While the cutting tests at room temperature provided the constitutive data encountered in the primary shear zone, the preheated cutting tests were designed to capture the material behavior at the high level of temperature and strain encountered in the secondary shear zone. In these preheated cutting tests, a laser beam was employed. Quasi-static tests were also utilized to identify some of the coefficients in the constitutive equations, in order to improve the convergence to a unique solution for the constitutive law.
Evaluation criteria were developed to assess the performance of constitutive equations. Based on the developed methodology and the evaluation criteria, a new constitutive equation for Inconel 718 has been proposed. This constitutive equation was further validated by Split Hopkinson Pressure Bar (SHPB) tests and cutting tests in conjunction with FEM simulations. The SHPB test data show an excellent agreement with the proposed material model. The cutting tests and the FEM simulation results also proved the validity of the proposed material constitutive law.
Style APA, Harvard, Vancouver, ISO itp.
3

Aguiar, Marcelo Mendes de. "Análise da influência das condições de corte sobre o fresamento em acabamento de aços endurecidos usando altas velocidades". [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/264165.

Pełny tekst źródła
Streszczenie:
Orientador: Anselmo Eduardo Diniz
Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica
Made available in DSpace on 2018-08-19T18:33:44Z (GMT). No. of bitstreams: 1 Aguiar_MarceloMendesde_M.pdf: 3795090 bytes, checksum: a76ee2a93e8e7595881459d7a6d71b50 (MD5) Previous issue date: 2012
Resumo: Normalmente, a utilização de aços ferramenta endurecidos, juntamente com as formas complexas típicas das peças utilizadas na área de moldes e matrizes, oferecem dificuldade na usinagem por fresamento, principalmente nas operações de acabamento que exijam o uso de ferramentas longas. A técnica de fresamento HSM (High Speed Machining - usinagem em altas velocidades, ou ainda High Speed Milling - fresamento em altas velocidades) tem se tornado uma alternativa para realizar este tipo de usinagem, reduzindo, ou às vezes até eliminando operações de eletro-erosão e polimento. Tipicamente, as fresas de pastilhas de metal duro intercambiáveis tem sido usadas em operações de desbaste e semi-acabamento, enquanto nas operações de acabamento ou em usinagem de geometrias que exijam ferramentas com pequenos diâmetros ainda predomina o uso de fresas inteiriças. O objetivo principal deste estudo é avaliar a influência de cinco variáveis de processo de fresamento com alta velocidade de corte, sobre o acabamento da superfície usinada. A influência do desgaste das ferramentas sobre o acabamento superficial, ao longo de 400 minutos de usinagem, também foi avaliado, além de uma comparação entre ferramentas inteiriças de metal duro e ferramentas de pastilha intercambiável montada em corpo de metal duro, a fim de avaliar a viabilidade técnica do uso deste segundo tipo de ferramenta, em substituição às tradicionais fresas inteiriças utilizadas em operações de acabamento. Na maioria dos experimentos realizados, pequenos valores de rugosidade foram mantidos, demonstrando que operações de acabamento em aço ABNT H13 IM com dureza de 50 HRC é possível com vida longa de ferramenta, mesmo utilizando-se valor de 500 m/min para velocidade de corte. Além disto, a análise da influência das variáveis de processo utilizadas neste trabalho mostrou que é possível, sob algumas condições, utilizar tanto ferramentas inteiriças, quanto de pastilha intercambiável montada em corpo de metal duro em operações de acabamento
Abstract: Typically, the use of hardened tool steels, along with complex shapes typical of the parts used in the field of molds and dies, offer difficulty in machining by milling, mainly in finishing operations that demand the use of long tool. The HSM (High Speed Machining or High Speed Milling) has become a possible alternative for making this type of machining, reducing, or sometimes eliminating electric discharge machining and polishing operations. Usually, indexable carbide insert mills has been used for roughing and semi-finishing, while in finishing operations or when the machining geometries that require tools with small diameters the integral tools are used yet. The main objective of this study is to evaluate the influence of five process variables, with high cutting speed, on the finish of the machined surface. The influence of tool wear on surface finish through 400 minutes of milling was also evaluated, as well as a comparison between integral carbide mills and indexable insert mounted at cemented carbide toolholder endmills, in order to evaluate the technical feasibility of using this second type of tool, replacing the traditional integral carbide endmills used in finishing operations. In most experiments, small roughness values were maintained, showing that finishing operations on AISI H13 IM with a hardness of 50 HRC is possible with long tool life, even using the cutting speed of 500 m/min. Furthermore, the analysis of the influence of process variables used in this study showed that is possible, under some conditions, the use either integral carbide tools, or indexable insert mounted at cemented carbide toolholder endmills on finishing operations
Mestrado
Materiais e Processos de Fabricação
Mestre em Engenharia Mecânica
Style APA, Harvard, Vancouver, ISO itp.
4

Svanberg, Andreas. "Numerical Methods for Simulating the Metal Shearing Process : A Novel Numerical Model for the Punching of Metals". Thesis, Luleå tekniska universitet, Material- och solidmekanik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-72742.

Pełny tekst źródła
Streszczenie:
When dealing with the separation of materials, the metal shearing process such as punching, is widely used in theindustry due to its time efficient manner. There is however, a need to better understand the process in order toimprove quality of the final product. Working with numerical simulations of themetal shearing process, there aretwo major difficulties. One being the extremely large deformation, the other being material failure. The combinationof these two makes numerical modeling challenging and is the reason for this study.The problem was divided in to two main parts, one where material modeling was studied, the other part focusedon numerical modeling and experiments of the punching process. A material model considering both plasticityandmaterial failure was created for a boron steel material. Plasticity behavior of thematerial was modeled with anelasto-plastic model and a calibratedModifiedMohr-Coulomb (MMC) failure criterion to model the material failure.The resultingMMC-model agreed well with the experiments.Punching experiments with varying clearances were performed on the boron steel. Punch forces and displacementswere continuously sampled throughout the process, and after the punching experiments were finished the punchededge profiles were studied. The multiphysics simulation software LS-DYNA was then utilized, and three dimensionalsimulations of the punching process using the Smoothed Particle Galerkin (SPG)method were performed.Results from the SPG-simulation corresponded very well with the results from punching experiments, and it can beconcluded that the model was able to capture the material behavior of the sheet in a highly detailed level. When thepunched edge profiles from the simulations were compared to the experiments, there was an almost exact match forall the cases studied. The force-displacement behavior of the punch from simulations was in great consistency withexperimental results as well.Itwas also concluded that the combination of a stress state dependent failure criterion together with the SPG-methodshows significant possibilities to cope with three dimensional problems where large deformations in combinationwith difficultmaterial failure occurs. This study focuses on the punching process, but the generality of this novelmodeling technique can be applied to many industrial cases and is a step towards a better and more reliablemodeling of failure in combination with extremely large deformation.
Style APA, Harvard, Vancouver, ISO itp.
5

Stephenson, Richard C. "Comparing the Feasibility of Cutting Thin-Walled Sections from Five Commonly Used Metals Utilizing Wire Electric Discharge Machining". Diss., CLICK HERE for online access, 2007. http://contentdm.lib.byu.edu/ETD/image/etd1948.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Karap, Vandana. "Preliminary Assessment: Identification of Chinese Drywall and Exposure to Particulate Matter and Metals during Cutting and Installation of Drywall". ScholarWorks@UNO, 2011. http://scholarworks.uno.edu/td/1321.

Pełny tekst źródła
Streszczenie:
Drywall, a popular building material made of gypsum based plaster sandwiched between two thick sheets of paper is used for building interior walls, is speedier alternative to traditional plaster, decreasing time and labor for construction. Importance of drywall increased with the demand for drywall after nine hurricanes hit Florida in 2004-05 and widespread damage caused in the Gulf Coast after Katrina in 2005. This study has two parts. First part presents an analysis of metals like strontium for the identification of Chinese drywall, and a comparison of strontium concentrations of American drywall and Chinese drywall using XRF (X-Ray Fluorescence) analysis with the Innov-X XRF analyzer. The second part presents an analysis of metal exposure during cutting and installation of drywall using 8stage Cascade impactor. The work space concentration of, different metals is analyzed using XRF analysis and particulate matter within various size ranges, were calculated and their effects are studied.
Style APA, Harvard, Vancouver, ISO itp.
7

Sasse, Ina [Verfasser]. "Schneiden und Schweißen strukturierter Bleche mit Faserlaser : Cutting and welding of structured sheet metals with fiber laser / Ina Sasse". Aachen : Shaker, 2014. http://d-nb.info/1059344416/34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Deonisio, Carlos Cesar de Castro. "Estudo do fresamento do aço D2 endurecido em altas velocidades de corte". [s.n.], 2004. http://repositorio.unicamp.br/jspui/handle/REPOSIP/264271.

Pełny tekst źródła
Streszczenie:
Orientador: Olivio Novaski
Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica
Made available in DSpace on 2018-08-05T07:03:19Z (GMT). No. of bitstreams: 1 Deonisio_CarlosCesardeCastro_D.pdf: 16365372 bytes, checksum: fb0542af08c6aa67ad7bd3a1a196a1f3 (MD5) Previous issue date: 2004
Resumo: O principal objetivo deste trabalho é caracterizar a qualidade da superfície gerada no processo de fresamento em acabamento, com fresas de topo esférico, do aço para trabalho a frio ABNT D2, endurecido. Utilizou-se o método do planejamento fatorial e as variáveis de influência foram às condições de contato entre a ferramenta e a superfície usinada, os parâmetros de corte e o desgaste de flanco da ferramenta de corte (VB). O aumento da velocidade de corte muda o mecanismo de formação do cavaco, causando a diminuição da razão entre o aumento dos esforços de usinagem e da deflexão da ferramenta de corte em relação ao aumento da velocidade de corte, decorrente da mudança na distribuição de temperatura entre a ferramenta de corte, a peça e o cavaco. Há interação entre a velocidade de corte, o sobrematerial e o avanço, em relação à deformação, encruamento e conseqüente endurecimento da superfície usinada. O desgaste da ferramenta de corte tem significativa influência na integridade da superfície gerada. A velocidade de corte e o avanço por dente influenciam na segmentação do cavaco
Abstract: The main goal of this investigation is to characterize the quality of the generated surface, in the process of finishing milling, of the hardened steel for cold work ABNT D2. The method of factorial planning was used and the variables of influence were the conditions of contact between the cutting tool and the machined surface, the cutting parameters and the cutting tool wear. The increase of the cutting speed change the mechanism of chip formation, causing the reduction of the ratio of the increase of machining forces and the deflection of the cutting tool in relation to the increase of the cut speed, because of the change in the distribution of temperature between the tool, the part and the chip. There is interaction between cutting speed, feed rate and stock removal, in relation the deformation, strain hardening and consequent hardening of the surface machining. The wear of the cutting tool has significant influence in the integrity of the generated surface. The cutting speed and the feed for tooth influence the segmentation of the chi
Doutorado
Materiais e Processos de Fabricação
Doutor em Engenharia Mecânica
Style APA, Harvard, Vancouver, ISO itp.
9

Hostinský, Michal. "Nekonvenční technologie výroby řetězů". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232064.

Pełny tekst źródła
Streszczenie:
Unconventional technologies and their continual development brings along new possibilities in the manufacturing process. The submitted project is focused on solving problems in the procession of sheet metals in the manufacture of special parts of roller and conveyor chains. In the assessment of the technology of components, laser cutting was evaluated as the most optimal technology. With this goal, there was a public tender in terms of the purchase of a new machine designed for the manufacturing operations of the company of RETEZY Vamberk. This company ranks among the most major manufacturers of conveyor, roller and special chains in Europe.
Style APA, Harvard, Vancouver, ISO itp.
10

Pilarčík, Edmund. "Studium kvality řezu hliníkových a Cu slitin při tavném řezání v závislosti na procesních parametrech při laserovém dělení s využitím YbYAG vláknového laseru". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241860.

Pełny tekst źródła
Streszczenie:
The diploma thesis discusses laser cutting of non-ferrous metals using fiber YbYag laser and evaluation of the roughness of cutting edge samples. To manufacture samples of aluminium Al 99,5, deoxidized copper Cu – DHP and brass CuZn37 were used combinations of process parameters according to Taguchi statistical method. Samples were subsequently evaluated, according to the ČSN EN ISO 9013 standard and sorted into roughness cathegories, and by technical and economical evaluation, the most economical process parameter combinations were found. Experimantal part is preceded by description of general methods of cutting, description of laser types, process parameters and their influence on the occurrence of the cutting edge defects and description of roughness measurement and standard ČSN EN ISO 9013.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Cutting metals"

1

Astakhov, Viktor P. Tribology of metal cutting. Amsterdam: Elsevier, 2006.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Brukwicki, Jarosław. Wybrane zagadnienia obróbki skrawaniem z zastosowaniem metody TCAC. Poznań: Wydawn. Poznańskiego Tow. Przyjaciół Nauk, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Metal cutting mechanics. Boca Raton: CRC Press, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Metals fabrication: Understanding the basics. Materials Park, Ohio: ASM International, 2013.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Słodki, Bogdan. Fizyczne i technologiczne aspekty zwijania i łamania wióra w obróbce superstopów na bazie niklu: Physical and technological aspects concerning chip curl and breaking in nickel based superalloys machining = Physische und technologische Aspekten von der Spanwicklung und dem Spanbrechen bei dem Zerspanen von Superlegierungen auf dem Nickelbasis. Kraków: Wydawnictwo PK, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Gao deng zhi ye ji shu jiao yu ji dian lei zhuan ye jiao cai bian wei hui, red. Shu kong ji chuang jia gong gong yi. Beijing: Ji xie gong ye chu ban she, 2000.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Carpenter Technology Corporation. Carpenter Steel Division., red. Guide to machining carpenter stainless steels and specialty metals. Reading, Pa: Carpenter Technology Corp., Carpenter Steel Division, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

1911-, Nāhaṭā Bham̐varalāla, i Research Institute of Prakrit, Jainology & Ahimsa., red. Ṭhakkura Pheru-granthāvalī. Wyd. 2. Mujappharapura: Prākr̥ta Jainaśāstra aura Ahiṃsā Śodha Saṃsthāna, 1996.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Holtzapffel, Charles. Materials, their differences, choice, and preparation, various modes of working them, generally without cutting tools. Mendham, N.J: Astragal Press, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Richard, Alexander, Bohnart Edward R, Witcraft Roger W i Deere & Company., red. Welding: The fundamentals of welding, cutting, brazing, soldering and surfacing of metals. Wyd. 8. Moline, Ill: Deere & Company, 2000.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Cutting metals"

1

Powell, John. "Cutting Non-metals". W CO2 Laser Cutting, 91–115. London: Springer London, 1998. http://dx.doi.org/10.1007/978-1-4471-1279-2_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Powell, John. "Cutting Non-metals". W CO2 Laser Cutting, 91–115. London: Springer London, 1993. http://dx.doi.org/10.1007/978-1-4471-3384-1_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Powell, John. "Cutting Non-ferrous Metals". W CO2 Laser Cutting, 71–90. London: Springer London, 1998. http://dx.doi.org/10.1007/978-1-4471-1279-2_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Powell, John. "Cutting Non-ferrous Metals". W CO2 Laser Cutting, 71–90. London: Springer London, 1993. http://dx.doi.org/10.1007/978-1-4471-3384-1_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Edwards, Les. "Carbon Anode Raw Materials—Where Is the Cutting Edge?" W Light Metals 2020, 1163–65. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36408-3_157.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Radovanovic, M. R., i D. B. Lazarevic. "Technological Aspects of Laser Cutting of Sheet Metals". W Advanced Manufacturing Systems and Technology, 551–58. Vienna: Springer Vienna, 1996. http://dx.doi.org/10.1007/978-3-7091-2678-3_66.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Kim, V. A., B. Ya Mokritsky i A. V. Morozova. "Dissipative Structure of Contact Interaction When Cutting Metals". W Lecture Notes in Mechanical Engineering, 1043–51. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-22063-1_111.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Díaz-Plaza De Los Reyes, Nicolás, Ricardo Alzugaray-Franz, Erardo Leal-Muñoz, Iván La Fé-Perdomo, Jorge Ramos-Grez i Eduardo Diez-Cifuentes. "Influence of Material Properties in Milling Forces of AISI 316L Obtained by L-PBF". W Proceedings of the XV Ibero-American Congress of Mechanical Engineering, 313–19. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-38563-6_46.

Pełny tekst źródła
Streszczenie:
AbstractTechnologies associated with additive manufacturing enabled the realization of several new products, providing high flexibility to the processes and high material usage efficiency. Furthermore, additively manufactured metals exhibit differences in surface topography and mechanical properties, primarily due to changes in the printing strategies and production parameters. Nowadays, postprocessing techniques are necessary to produce a quality printed metal product, due to the high initial surface roughness that every additive specimen presents. In this study, milling tests of additively manufactured AISI 316L workpieces obtained under different conditions were performed to investigate the influence of printing volumetric energy density, material density, and material ultimate tensile strength on cutting forces. The analysis revealed an association between cutting forces amplitude and the analyzed material properties. Also, similar machinability between the printed and the hot rolled metal was found when the density of the material was similar.
Style APA, Harvard, Vancouver, ISO itp.
9

Kuşdemir, Hakan, Kagan Benzesik, Ahmet Turan i Onuralp Yücel. "Investigation of Hydrometallurgical Recycling Parameters of WC–Co Cutting Tool Scraps". W The Minerals, Metals & Materials Series, 327–37. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92563-5_34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Schenek, A., M. Görz, M. Liewald i K. R. Riedmüller. "Prediction of Cutting Surface Parameters in Punching Processes Aided by Machine Learning". W The Minerals, Metals & Materials Series, 607–19. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-22524-6_54.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Cutting metals"

1

Harrison, Paul, i Jack Gabzdyl. "Pulsed laser cutting of bright metals". W ICALEO® 2012: 31st International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2012. http://dx.doi.org/10.2351/1.5062383.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Schreiner, U., E. Bächle, R. Edler, K. Riehle i F. Dausinger. "Laser cutting of non-ferrous metals". W ICALEO® ‘89: Proceedings of the Materials Processing Conference. Laser Institute of America, 1989. http://dx.doi.org/10.2351/1.5058311.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Kleine, Klaus F., i Kenneth G. Watkins. "Fiber laser for micro-cutting of metals". W High-Power Lasers and Applications, redaktor L. N. Durvasula. SPIE, 2003. http://dx.doi.org/10.1117/12.484171.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Sagapuram, Dinakar, i Koushik Viswanathan. "Viscous Shear Banding in Cutting of Metals". W ASME 2018 13th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/msec2018-6697.

Pełny tekst źródła
Streszczenie:
Shear banding is a type of plastic flow instability with often adverse implications for cutting and deformation processing of metals. Here, we study the mechanics of plastic flow evolution within single shear bands in two different (Ti and Ni-based) alloy systems. The local shear band displacement profiles are quantitatively mapped at high resolution using a special micro-marker technique. The results show that shear bands, once nucleated, evolve by a universal viscous sliding mechanism that is independent of microstructural details. The evolution of local deformation around the band is accurately captured using a simple momentum diffusion model by assuming Bingham flow rheology for the band material. The predicted band viscosity is very small, comparable to those of liquid metals. A plausible explanation for this small viscosity and fluid-like behavior at the band, based on phonon drag, is presented.
Style APA, Harvard, Vancouver, ISO itp.
5

Dubrov, Alexander V., Vladimir D. Dubrov i Yury N. Zavalov. "Thermocapillary effects in CO2 laser cutting of metals". W 2011 IEEE 11th International Conference on Laser and Fiber-Optical Networks Modeling (LFNM). IEEE, 2011. http://dx.doi.org/10.1109/lfnm.2011.6144968.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Powell, J., K. Frass, I. A. Menzies i H. Fuhr. "CO 2 Laser Cutting Of Non-Ferrous Metals". W 1988 International Congress on Optical Science and Engineering, redaktor A. Quenzer. SPIE, 1989. http://dx.doi.org/10.1117/12.950060.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Islam, Sumaiya, Raafat Ibrahim i Raj Das. "On cutting mechanisms during nano machining of metals". W 2010 International Conference on Nanoscience and Nanotechnology (ICONN). IEEE, 2010. http://dx.doi.org/10.1109/iconn.2010.6045202.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Bicleanu, Dima, Milan Brandt i Hartmut Kaebernick. "An analytical model for pulsed laser cutting of metals". W ICALEO® ‘96: Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1996. http://dx.doi.org/10.2351/1.5059044.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Tong, Kwok-On. "An analytical model for laser fusion cutting of metals". W ICALEO® ‘97: Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1997. http://dx.doi.org/10.2351/1.5059675.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Bannov, Konstantin V., Alexander V. Gradoboev i Valery S. Matveev. "Mechanism of the directed destruction of metals by cutting". W 2012 7th International Forum on Strategic Technology (IFOST). IEEE, 2012. http://dx.doi.org/10.1109/ifost.2012.6357786.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Cutting metals"

1

Berger, B. S., i I. Minis. Characterization of metal cutting dynamics. Final report. Office of Scientific and Technical Information (OSTI), listopad 1997. http://dx.doi.org/10.2172/588027.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Chiang, Edwin, i Kathleen Paulson. Alternative Metal Hot Cutting Operations for Opacity. Fort Belvoir, VA: Defense Technical Information Center, listopad 2014. http://dx.doi.org/10.21236/ada616469.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Kistler, B. L. Finite element analyses of tool stresses in metal cutting processes. Office of Scientific and Technical Information (OSTI), styczeń 1997. http://dx.doi.org/10.2172/477614.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Whitenton, Eric P. High-speed dual-spectrum imaging for the measurement of metal cutting temperatures. Gaithersburg, MD: National Institute of Standards and Technology, 2010. http://dx.doi.org/10.6028/nist.ir.650e2010.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

M A Ebadian, Ph D., S.K. Dua, Ph.D., C.H.P. i Ph D. Hillol Guha. SIZE DISTRIBUTION AND RATE OF PRODUCTION OF AIRBORNE PARTICULATE MATTER GENERATED DURING METAL CUTTING. Office of Scientific and Technical Information (OSTI), styczeń 2001. http://dx.doi.org/10.2172/793521.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Whitenton, Eric P. High-speed dual-spectrum imaging for the measurement of metal cutting temperatures�(2010 edition). Gaithersburg, MD: National Institute of Standards and Technology, 2010. http://dx.doi.org/10.6028/nist.ir.7650.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Guo, Wenping, Hongguang Jin, Yiqiang Wang, Xing Zhu, Guanwei Zhang, Te Wang, Chunhui Fan i Yongsheng Huang. Efficacy and safety of cutting therapy in the treatment of migraine ― A protocol for systematic review and meta-analysis. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, listopad 2021. http://dx.doi.org/10.37766/inplasy2021.11.0029.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Li, Ji-xu, You-ran Jia, Yan-lin Guo, Lin Zhang i Hao Liang. Meta-analysis of rotational atherectomy combined with cutting balloon in the treatment of moderate and severe coronary artery calcification. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, wrzesień 2022. http://dx.doi.org/10.37766/inplasy2022.9.0095.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Health hazard evaluation report: HETA-2008-0091-3118, evaluation of metal and carbon monoxide exposures during steel slab cutting and slitting - Indiana. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, grudzień 2010. http://dx.doi.org/10.26616/nioshheta200800913118.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Cutting metals” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii