Gotowa bibliografia na temat „Current capability”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Current capability”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Current capability"
Lumen, S. M. Sanzad, Ramani Kannan i Nor Zaihar Yahaya. "A new direct current circuit breaker with current regeneration capability". International Journal of Power Electronics and Drive Systems (IJPEDS) 12, nr 4 (1.12.2021): 2322. http://dx.doi.org/10.11591/ijpeds.v12.i4.pp2322-2335.
Pełny tekst źródłaEnjeti, P. N., P. D. Ziogas i J. F. Lindsay. "A current source PWM inverter with instantaneous current control capability". IEEE Transactions on Industry Applications 27, nr 3 (1991): 582–88. http://dx.doi.org/10.1109/28.81845.
Pełny tekst źródłaPakpour-Tabrizi, Alexander C., Shari Yosinski, Ralph Jennings-Moors, Zachary A. Kobos, Sonya D. Sawtelle, Mark A. Reed i Richard B. Jackman. "Diamond Nanowire Transistor with High Current Capability". physica status solidi (a) 219, nr 6 (19.01.2022): 2100622. http://dx.doi.org/10.1002/pssa.202100622.
Pełny tekst źródłaLieberman, Jeffrey A. "Treatment of Schizophrenia: Current Capability, Future Promise". Psychiatric News 47, nr 3 (3.02.2012): 28. http://dx.doi.org/10.1176/pn.47.3.psychnews_47_3_28-a.
Pełny tekst źródłaThakur, K. P., Z. Jiang, M. P. Staines, N. J. Long, R. A. Badcock i Ashish Raj. "Current carrying capability of HTS Roebel cable". Physica C: Superconductivity 471, nr 1-2 (styczeń 2011): 42–47. http://dx.doi.org/10.1016/j.physc.2010.11.001.
Pełny tekst źródłaBourgault, D., S. Pavard, R. Tournier, L. Porcar, N. Caillault i L. Carbone. "Current limitation capability of bulk Bi2223 material". Physica C: Superconductivity 372-376 (sierpień 2002): 1598–601. http://dx.doi.org/10.1016/s0921-4534(02)01081-x.
Pełny tekst źródłaPrice, James. "HART communications: current capability and future options". Journal of Paramedic Practice 7, nr 3 (2.03.2015): 118–19. http://dx.doi.org/10.12968/jpar.2015.7.3.118.
Pełny tekst źródłaGroves, Keith. "Current forecasting capability at the Met Office". Weather 59, nr 11 (1.11.2004): 295–98. http://dx.doi.org/10.1256/wea.126.04.
Pełny tekst źródłaLaoudias, C., i C. Psychalinos. "Differential voltage current controlled current conveyor with low-voltage operation capability". International Journal of Electronics 101, nr 7 (25.06.2013): 939–49. http://dx.doi.org/10.1080/00207217.2013.805360.
Pełny tekst źródłaBaik, Kwang-Hyun, i Sang-Ho Lee. "A Comparison Study between Current Capability and Required Capability of Managers in Business Incubator". Journal of the Korea Academia-Industrial cooperation Society 12, nr 5 (31.05.2011): 2142–48. http://dx.doi.org/10.5762/kais.2011.12.5.2142.
Pełny tekst źródłaRozprawy doktorskie na temat "Current capability"
Kujiroaoka, Scott R., Russell G. Fielder i Alvia D. Sandberg. "Current Status of Adding GPS Tracking Capability to a Missile Telemetry Section". International Foundation for Telemetering, 2008. http://hdl.handle.net/10150/606153.
Pełny tekst źródłaPast presented papers have discussed the integration efforts of incorporating Central Test & Evaluation Investment Program (CTEIP) sponsored Joint Advanced Missile Instrumentation (JAMI) components (namely the JAMI TSPI Unit-JTU), Commercial off the Shelf (COTS) parts (e.g. ARTM Tier I SO-QPSK Transmitter, Encryptor and Thermal Battery), and in-house developed devices (such as PCM Encoder and Dual Band Antenna) into a five-inch diameter Missile Telemetry (TM) Section. A prototype of this TM Section has been built up and integrated into an All Up Round (AUR) Missile and twice flown as a Captive Carried Test Missile (CTM) on an F/A-18 jet with great success. This TM Section is in the process of undergoing flight qualification testing (including environmental and electro-magnetic interference-EMI tests). After which it will be ready for mass production. This paper will detail these current efforts. In addition, the effort to upgrade some Navy and Air Force Test Ranges (with JAMI Ground Stations and Decommutators/Demodulators) to track and gather data from this Missile containing the new TM section will be discussed. Future plans to incorporate Flight Termination System (FTS) capabilities into the TM section will be covered as well.
Hill, Owen J. "Aircraft modifications assessing the current state of Air Force aircraft modifications and the implications for future military capability /". Santa Monica, CA : RAND, 2006. http://www.rand.org/pubs/rgsd_issertations/RGSD207/.
Pełny tekst źródłaBaburske, Roman. "Dynamik des Ladungsträgerplasmas während des Ausschaltens bipolarer Leistungsdioden". Doctoral thesis, Universitätsbibliothek Chemnitz, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-74615.
Pełny tekst źródłaThis work concerns the reverse-recovery process of bipolar power diodes. The focus is the investigation of two undesirable phenomena. These are the sudden strong reverse-current decay and the destruction of the diode with a local melting of the chip in the active area. The plasma layer, which arises during the switching period, is considered. An analysis of the plasma-layer front dynamics allows an understanding of the influence of switching parameters on the plasma extraction and the different behavior of anode-side and cathode-side filaments. The results of the analysis are used to describe the operation of the modern diode concept CIBH (Controlled Injection of Backside Holes). The potential of CIBH diodes to improve cosmic-ray stability and surge-current ruggedness is investigated. Finally, a new anode-emitter concept called IDEE (Inverse Injection Dependency of Emitter Efficiency) is introduced, which improves in combination with CIBH the overall performance of a power diode
Baburske, Roman. "Dynamik des Ladungsträgerplasmas während des Ausschaltens bipolarer Leistungsdioden". Doctoral thesis, Universitätsverlag der Technischen Universität Chemnitz, 2010. https://monarch.qucosa.de/id/qucosa%3A19578.
Pełny tekst źródłaThis work concerns the reverse-recovery process of bipolar power diodes. The focus is the investigation of two undesirable phenomena. These are the sudden strong reverse-current decay and the destruction of the diode with a local melting of the chip in the active area. The plasma layer, which arises during the switching period, is considered. An analysis of the plasma-layer front dynamics allows an understanding of the influence of switching parameters on the plasma extraction and the different behavior of anode-side and cathode-side filaments. The results of the analysis are used to describe the operation of the modern diode concept CIBH (Controlled Injection of Backside Holes). The potential of CIBH diodes to improve cosmic-ray stability and surge-current ruggedness is investigated. Finally, a new anode-emitter concept called IDEE (Inverse Injection Dependency of Emitter Efficiency) is introduced, which improves in combination with CIBH the overall performance of a power diode.
Korejčík, Michal. "Návrh transformátoru s regulací fáze pro laboratorní výuku". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219412.
Pełny tekst źródłaPastore, Carine. "Evaluation de back-end of line optimisés pour les inductances intégrées en technologies CMOS et BiCMOS avancées visant les applications radiofréquences". Phd thesis, Grenoble 1, 2009. http://www.theses.fr/2009GRE10081.
Pełny tekst źródłaIntegrated in BEOL metallizations of CMOS or BiCMOS technologies, inductors have to meet requirements in terms of high electrical performances, low area and/or high current capability. However, this challenge is tricky to address. Actually, BEOL evolution and silicon substrate losses in Advanced CMOS technologies greatly decrease inductors' performances. Thus, the evaluation of optimized BEOL dedicated to the integration of inductors is essential if we want to target RF applications' specifications. The main objective of this thesis is to provide optimized technological solutions for inductors integrated in silicon technologies, and targeting RF applications in the 1 - 5 GHz frequency range. A dummy fill strategy has been evaluated at the scale of the device (without impacting its electrical performances) in order to fulfil metal density required in advanced technologies (down to the 32 nm node). Then, we have focused our attention on the evaluation of an optimized BEOL using a Double Thick Copper module in a 65 nm CMOS bulk technology. Actually, the wish to integrate the module dedicated to the power amplifier in CMOS technology has raised high current issues (up to 1 A @ 125°C), which is impossible to target with a standard BEOL. In the same trend, this optimized BEOL has been evaluated in SOI technology. Actually, this technology is starting to come up for the complete integration of the RF Front End module in CMOS technology thanks to its compatibility with HR silicon substrates which enables to integrate even more functions (antennas, diplexer, balun). Thus, inductor's optimization using a Double Thick Copper module has been performed in a 130 nm HR SOI CMOS technology
Mallangi, Siva Sai Reddy. "Low-Power Policies Based on DVFS for the MUSEIC v2 System-on-Chip". Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-229443.
Pełny tekst źródłaNuförtiden så har multifunktionella bärbara hälsoenheter fått en betydande roll. Dessa enheter drivs vanligtvis av batterier och är därför begränsade av batteritiden (från ett par timmar till ett par veckor beroende på tillämpningen). På senaste tiden har det framkommit att dessa enheter som används vid en fast spänning och frekvens kan användas vid flera spänningar och frekvenser. Genom att byta till lägre spänning och frekvens på grund av effektbehov så kan enheterna få enorma fördelar när det kommer till energibesparing. Dynamisk skalning av spänning och frekvens-tekniker (såkallad Dynamic Voltage and Frequency Scaling, DVFS) har visat sig vara användbara i detta sammanhang för en effektiv avvägning mellan energi och beteende. Hos Imec så använder sig bärbara enheter av den internt utvecklade MUSEIC v2 (Multi Sensor Integrated circuit version 2.0). Systemet är optimerat för effektiv och korrekt insamling, bearbetning och överföring av data från flera (hälso) sensorer. MUSEIC v2 har begränsad möjlighet att styra spänningen och frekvensen dynamiskt. I detta examensarbete undersöker vi hur traditionella DVFS-tekniker kan appliceras på MUSEIC v2. Experiment utfördes för att ta reda på de optimala effektlägena och för att effektivt kunna styra och även skala upp matningsspänningen och frekvensen. Eftersom att ”overhead” skapades vid växling av spänning och frekvens gjordes också en övergångsanalys. Realtidsoch icke-realtidskalkyler genomfördes baserat på dessa tekniker och resultaten sammanställdes och analyserades. I denna process granskades flera toppmoderna schemaläggningsalgoritmer och skalningstekniker för att hitta en lämplig teknik. Genom att använda vår föreslagna skalningsteknikimplementering har vi uppnått 86,95% effektreduktion i jämförelse med det konventionella sättet att MUSEIC v2-chipets processor arbetar med en fast spänning och frekvens. Tekniker som inkluderar lätt sömn och djupt sömnläge studerades och implementerades, vilket testade systemets förmåga att tillgodose DPM-tekniker (Dynamic Power Management) som kan uppnå ännu större fördelar. En ny metod för att genomföra den djupa sömnmekanismen föreslogs också och enligt erhållna resultat så kan den ge upp till 71,54% lägre energiförbrukning jämfört med det traditionella sättet att implementera djupt sömnläge.
Kuo, Chung-Jen, i 郭仲仁. "A 13.56MHz Current-Mode Wireless Power Receiver With Energy-Investment Capability". Thesis, 2018. http://ndltd.ncl.edu.tw/handle/p437he.
Pełny tekst źródła國立臺灣大學
電子工程學研究所
106
For the development of the Internet of Things (IoT), wearable devices, and implantable medical devices, the wireless power transmission is receiving significant attention. In these applications, the external power from a transmitter is transmitted by the coils / antennas, and an AC voltage will be received in a wireless device. In the traditional wireless power transfer systems, the AC-DC conversion systems followed by the DC-DC conversion systems are used to generate an accurate voltage to safely charge a battery. Recently, the current-mode wireless power receivers are presented. By charging the battery with inductor current, the current-mode wireless power systems avoid rectification and voltage regulation. Therefore, the DC-DC conversion systems are spared and the PCE is improved. Also, the chip area and the off-chip components are reduced. This thesis presents a 13.56MHz current-mode wireless power receiver with energy-investment capability. When the system is in the charging mode, this work does not charge the output battery with all the power in the LC tank as the state-of-the-art systems do, this work reserves a fraction of energy stored as an investing voltage in the resonate capacitor instead. The investing voltage gives an initial voltage of the coil when this work finishes charging and starts to accumulate energy. The investing voltage increases the ability to grab energy from electromotive force (EMF). This work employs sample and holds circuits (SAHs) with low-frequency clocks to sample voltage and digital controlled delay lines (DCDLs) to control the switching timing of the power MOS. By this way, the operation frequency can be raised to 13.56MHz. High bandwidth circuits are avoided in the control circuits and power is saved. This work is fabricated in a 0.18-µm CMOS process and the active area is 0.341mm2. It achieves a peak PCE of 67.1% when the input power is 6mW.
Naderi, SB. "Improvement of fault ride through capability of wind turbines by fault current limiters". Thesis, 2018. https://eprints.utas.edu.au/28601/1/Naderi_whole_thesis_ex_pub_mat.pdf.
Pełny tekst źródłaLin, Xuan-Yong, i 林玄用. "AMOLED Driving Circuit with Subthreshold Current Compensating Capability for High PPI Display Panel". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/95442b.
Pełny tekst źródła國立交通大學
光電工程研究所
104
In this paper, we present a [novel sentinel voltage control method] of external compensating driving circuit which could mainly be applied to the active-matrix organic light-emitting diode displays (AMOLED). The pixel driving current is gradually increased by the ramp voltage at gate and converted to voltage in real time. When the sensed voltage is equal to the sentinel voltage, the gate voltage stops changing. Thus, the gate voltage is pinched at the value corresponding to the target driving current. The pixel contains only three thin-film transistors (TFTs) and one capacitor, which is suitable for high PPI display. Owing to the small area of the high PPI pixel, the operation current of driving TFT may drop down to an extremely low level. However, this compensation circuit can work for low current level, even when the TFT is operated in the subthreshold where the current exponentially varies III with its gate voltage. Although the compensation circuit can be successfully operated, there are still some issue needs to solve when it works. Hence, we proposed an advanced version of this external compensation circuit in the following chapter. Regarding to different issue, we present multiply approaches to overcome them and make the circuit design complete. Thus, using these compensation circuit can conquer the operation difficulty of high PPI AMOLED and make external driver IC work simple by pinching off signal at expected value. Along with display panels in mobile devices, wearable devices, Augmented Reality (AR) products and Virtual Reality (VR) products being indispensable tools in recent years, these techniques are sure to be widely used.
Książki na temat "Current capability"
Liang, Shan. Isolation and current handling capability issues in power integrated circuit design. Ottawa: National Library of Canada, 1990.
Znajdź pełny tekst źródłaEvans, R. W. Design guidelines for shielding effectiveness, current carrying capability, and the enhancement of conductivity of composite materials. Marshall Space Flight Center, Ala: National Aeronautics and Space Administration, [George C. Marshall Space Flight Center, 1997.
Znajdź pełny tekst źródłaIEEE Rotating Machinery Committee. i Institute of Electrical and Electronics Engineers., red. IEEE trial-use recommended practice for the evaluation of the impulse voltage capability of insulation systems for AC electric machinery employing form-wound stator coils. New York, N.Y: The Institute of Electrical and Electronics Engineers, 1988.
Znajdź pełny tekst źródłaGeorge C. Marshall Space Flight Center., red. Design guidelines for shielding effectiveness, current carrying capability, and the enhancement of conductivity of composite materials: Under contract NAS8-39983. Marshall Space Flight Center, Ala: National Aeronautics and Space Administration, [George C. Marshall Space Flight Center, 1997.
Znajdź pełny tekst źródłaAvichal, Mehra, i United States. National Aeronautics and Space Administration., red. Demonstration of a real time capability to produce tidal heights and currents for naval operational use: A case study for the west coast of Africa (Liberia). [Bay Saint Louis, Miss.]: Mississippi State University, Center for Air Sea Technology, 1996.
Znajdź pełny tekst źródłaHick, Rod, i Tania Burchardt. Capability Deprivation. Redaktorzy David Brady i Linda M. Burton. Oxford University Press, 2017. http://dx.doi.org/10.1093/oxfordhb/9780199914050.013.5.
Pełny tekst źródłaCurrent wind tunnel capability and planned improvements at Lewis Research Center. [Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1986.
Znajdź pełny tekst źródłaOperating capability and current status of the reactivated NASA Lewis Research Center hypersonic tunnel facility. [Washington, DC]: National Aeronautics and Space Administration, 1995.
Znajdź pełny tekst źródłaNational Aeronautics and Space Administration (NASA) Staff. Design Guidelines for Shielding Effectiveness, Current Carrying Capability, and the Enhancement of Conductivity of Composite Materials. Independently Published, 2018.
Znajdź pełny tekst źródłaAlkire, Sabina. The Capability Approach and Well-Being Measurement for Public Policy. Redaktorzy Matthew D. Adler i Marc Fleurbaey. Oxford University Press, 2016. http://dx.doi.org/10.1093/oxfordhb/9780199325818.013.18.
Pełny tekst źródłaCzęści książek na temat "Current capability"
Kučera, Ĺuboš, Jakub Palenčár, Rudolf Palenčár, Stanislav Ďuriš, Ján Vachálek i Jan Rybář. "Monitoring of the Measurement Process Capability by Using Capability Indices". W Current Methods of Construction Design, 327–32. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-33146-7_37.
Pełny tekst źródłaZhongguancun Listed Companies Assoc. "Report on Innovation Capability of ZLCs in 2019". W Current Chinese Economic Report Series, 81–94. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6908-5_4.
Pełny tekst źródłaSheiko, Sergei S., i Martin Möller. "Hyperbranched Macromolecules: Soft Particles with Adjustable Shape and Persistent Motion Capability". W Topics in Current Chemistry, 137–75. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/3-540-44924-8_4.
Pełny tekst źródłaBecker, Pablo, Fernanda Papa i Luis Olsina. "Enhancing the Conceptual Framework Capability for a Measurement and Evaluation Strategy". W Current Trends in Web Engineering, 104–16. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-04244-2_11.
Pełny tekst źródłaZhongguancun Listed Companies Assoc. "Report on Solvency and Operating Capability Analysis of ZLCs in 2019". W Current Chinese Economic Report Series, 57–79. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6908-5_3.
Pełny tekst źródłaZhongguancun Listed Companies Assoc. "Report on Cash, Investment and Financing Capability of ZLCs in 2019". W Current Chinese Economic Report Series, 95–107. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6908-5_5.
Pełny tekst źródłaZhongguancun Listed Companies Assoc. "Research Report on Innovation Capability of Zhongguancun NEEQ Listed Companies in 2019". W Current Chinese Economic Report Series, 41–49. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6819-4_3.
Pełny tekst źródłaKaplinsky, Raphael. "Past Innovation Trajectories in Latin America and Current Innovation Trajectories in the Asian Driver Economies". W Learning, Capability Building and Innovation for Development, 263–81. London: Palgrave Macmillan UK, 2013. http://dx.doi.org/10.1057/9781137306937_14.
Pełny tekst źródłaZhongguancun Listed Companies Assoc. "Analysis of the Solvency and Operating Capability of Zhongguancun NEEQ Listed Companies in 2019". W Current Chinese Economic Report Series, 51–67. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-6819-4_4.
Pełny tekst źródłaYao, Mengyu, i Xueao Qiu. "A Current Flow Controller with Independent Regulation Capability for HVDC Grid". W Lecture Notes in Electrical Engineering, 253–62. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-7393-4_24.
Pełny tekst źródłaStreszczenia konferencji na temat "Current capability"
Basler, Thomas, Josef Lutz, Roland Jakob i Thomas Bruckner. "Surge current capability of IGBTs". W 2012 IEEE 9th International Multi-Conference on Systems, Signals and Devices (SSD). IEEE, 2012. http://dx.doi.org/10.1109/ssd.2012.6198072.
Pełny tekst źródłaDelbruck, Tobi, Raphael Berner, Patrick Lichtsteiner i Carlos Dualibe. "32-bit Configurable bias current generator with sub-off-current capability". W 2010 IEEE International Symposium on Circuits and Systems - ISCAS 2010. IEEE, 2010. http://dx.doi.org/10.1109/iscas.2010.5537475.
Pełny tekst źródłaRomheld, M., i W. Hartmann. "Impulse current withstand capability of coaxial cables in high current applications". W 2008 IEEE International Power Modulators and High Voltage Conference. IEEE, 2008. http://dx.doi.org/10.1109/ipmc.2008.4743605.
Pełny tekst źródłaJing Zhu, Weifeng Sun, Qinsong Qian, Lu Cao, Nailong He i Sen Zhang. "700V thin SOI-LIGBT with high current capability". W 2013 25th International Symposium on Power Semiconductor Devices & IC's (ISPSD). IEEE, 2013. http://dx.doi.org/10.1109/ispsd.2013.6694443.
Pełny tekst źródłaMihaila, A., C. Liu, G. Romano, E. Bianda, S. Wirths, Y. Arango, L. Knoll, A. Baschnagel i B. Boksteen. "Surge current capability of 6.5kV-rated SiC MOSFETs". W 2020 32nd International Symposium on Power Semiconductor Devices and ICs (ISPSD). IEEE, 2020. http://dx.doi.org/10.1109/ispsd46842.2020.9170186.
Pełny tekst źródłaLi, Yucen, Shuai Shao, Hui Chen, Junming Zhang i Kuang Sheng. "An IPOS LLC Converter with Current Sharing Capability". W 2019 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2019. http://dx.doi.org/10.1109/ecce.2019.8913290.
Pełny tekst źródłaEnvia, Edmane, Daniel Tweedt, Richard Woodward, David Elliott, E. Fite, Christopher Hughes, Gary Podboy i Daniel Sutliff. "An Assessment of Current Fan Noise Prediction Capability". W 14th AIAA/CEAS Aeroacoustics Conference (29th AIAA Aeroacoustics Conference). Reston, Virigina: American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-2991.
Pełny tekst źródłanull. "The German military current capability and future plans". W IEE Colloquium on Military Satellite Communications II. IEE, 1997. http://dx.doi.org/10.1049/ic:19971067.
Pełny tekst źródłaZhang, Xuning, Ehab Tarmoom, Ali Shahabi, Linda Starr i Dennis Meyer. "Avalanche Capability of SiC MOSFET Under High Current". W 2023 IEEE 10th Workshop on Wide Bandgap Power Devices & Applications (WiPDA). IEEE, 2023. http://dx.doi.org/10.1109/wipda58524.2023.10382217.
Pełny tekst źródłaOrikawa, Koji, Naoki Murakami i Satoshi Ogasawara. "Increasing Current Capability of Air-Core Planar Inductors Capable of Suppressing Eddy Currents". W 2023 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2023. http://dx.doi.org/10.1109/ecce53617.2023.10362037.
Pełny tekst źródłaRaporty organizacyjne na temat "Current capability"
Peurrung, Anthony J., i Richard A. Craig. Bubble Radiation Detection: Current and Future Capability. Office of Scientific and Technical Information (OSTI), listopad 1999. http://dx.doi.org/10.2172/15001056.
Pełny tekst źródłaAJ Peurrung i RA Craig. Bubble Radiation Detection: Current and Future Capability. Office of Scientific and Technical Information (OSTI), listopad 1999. http://dx.doi.org/10.2172/14663.
Pełny tekst źródłaHerd, Walter M. Current Unconventional Warfare Capability Versus Future War Requirements. Fort Belvoir, VA: Defense Technical Information Center, kwiecień 2002. http://dx.doi.org/10.21236/ada402022.
Pełny tekst źródłaBenbow, Robert, Fred Ensminger, Peter Swartz, Scott Savitz i Dan Stimpson. Renewal of Navy's Riverine Capability: A Preliminary Examination of Past, Current and Future Capabilities. Fort Belvoir, VA: Defense Technical Information Center, marzec 2006. http://dx.doi.org/10.21236/ada447820.
Pełny tekst źródłaHopper, Darrel G. 1000 X Difference Between Current Displays and Capability of Human Visual System: Payoff Potential for Affordable Defense Systems. Fort Belvoir, VA: Defense Technical Information Center, styczeń 2000. http://dx.doi.org/10.21236/ada430165.
Pełny tekst źródłaMoore, Brian D. Fighter Maintenance and Total Force Integration: Current Active Duty Manpower Implementation Practices and the Impact on Deployment Capability. Fort Belvoir, VA: Defense Technical Information Center, kwiecień 2009. http://dx.doi.org/10.21236/ada540126.
Pełny tekst źródłaCaldwell, John F. Forced Entry: Does the Current Airborne Division Still Retain This Capability Under the Light Infantry Tables of Organization and Equipment? Fort Belvoir, VA: Defense Technical Information Center, wrzesień 1987. http://dx.doi.org/10.21236/ada179595.
Pełny tekst źródłaStreile, G. P., i C. S. Simmons. Subsurface flow and transport of organic chemicals: an assessment of current modeling capability and priority directions for future research (1987-1995). Office of Scientific and Technical Information (OSTI), wrzesień 1986. http://dx.doi.org/10.2172/5099142.
Pełny tekst źródłaGao, Krishnamurthy i McNealy. L52313 Performance Improvements of Current ILI Technologies for Mechanical Damage Detection Phase 2. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), lipiec 2009. http://dx.doi.org/10.55274/r0010681.
Pełny tekst źródłaNestleroth. L51657 Remote Field Eddy Current Detection of Stress-Corrosion Cracks - Phase II. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), styczeń 1991. http://dx.doi.org/10.55274/r0010619.
Pełny tekst źródła