Gotowa bibliografia na temat „Crystal liquids- Solvates”

In Portugal, publications with mechanochemical methods date back to 2009, with the report on mechanochemical strategies for the synthesis of metallopharmaceuticals. Since then, mechanochemical applications have grown in Portugal, spanning several fields, mainly crystal engineering and supramolecular chemistry, catalysis, and organic and inorganic chemistry. The area with the most increased development is the synthesis of multicomponent crystal forms, with several groups synthesizing solvates, salts, and cocrystals in which the main objective was to improve physical properties of the active pharmaceutical ingredients. Recently, non-crystalline materials, such as ionic liquids and amorphous solid dispersions, have also been studied using mechanochemical methods. An area that is in expansion is the use of mechanochemical synthesis of bioinspired metal-organic frameworks with an emphasis in antibiotic coordination frameworks. The use of mechanochemistry for catalysis and organic and inorganic synthesis has also grown due to the synthetic advantages, ease of synthesis, scalability, sustainability, and, in the majority of cases, the superior properties of the synthesized materials. It can be easily concluded that mechanochemistry is expanding in Portugal in diverse research areas.

Based on the unique ubiquity of similar solvate structures found in solvate crystals and superconcentrated electrolytes, we performed a systematic study of four reported solvate crystals which consist of different lithium salts (i.e., LiMPSA, LiTFSI, LiDFOB, and LiBOB) solvated by acetonitrile (MeCN) based on first principles calculations. Based on the calculations, these solvate crystals are predicted to be electronic insulators and are expected to be similar to their insulating liquid counterpart (e.g., 4 M superconcentrated LiTFSI-MeCN electrolyte), which has been confirmed to be a promising electrolyte in lithium batteries. Although the MeCN molecule is highly unstable during the reduction process, it is found that the salt-MeCN solvate molecules (e.g., LiTFSI-(MeCN)2, LiDFOB-(MeCN)2) and their charged counterparts (anions and cations) are both thermodynamically and electrochemically stable, which can be confirmed by Raman vibrational modes through the unique characteristic variation in C≡N bond stretching of MeCN molecules. Therefore, in addition to the development of new solvents or lithium salts, we suggest it is possible to utilize the formation of superconcentrated electrolytes with improved electrochemical stability based on existing known compounds to facilitate the development of novel electrolyte design in advanced lithium batteries.

Pharmaceutical salt solvates (dimethyl sulfoxide, DMSO) of the drug triamterene with the coformers acetic, succinic, adipic, pimelic, azelaic and nicotinic acid and ibuprofen are prepared by liquid-assisted grinding and solvent-evaporative crystallization. The modified ΔpK a rule as proposed by Cruz-Cabeza [(2012). CrystEngComm, 14, 6362–6365] is in close agreement with the results of this study. All adducts were characterized by X-ray diffraction and thermal analytical techniques, including single-crystal X-ray diffraction, powder X-ray diffraction, differential scanning calorimetry and thermal gravimetric analysis. Hydrogen-bonded motifs combined to form a variety of extended tapes and sheets. Analysis of the crystal structures showed that all adducts existed as salt solvates and contained the aminopyridinium–carboxylate heterodimer, except for the solvate containing triamterene, ibuprofen and DMSO, as a result of the presence of a strong and stable hemitriamterenium duplex. A search of the Cambridge Structural Database (CSD 5.36, Version 1.18) to determine the frequency of occurrence of the putative supramolecular synthons found in this study showed good agreement with previous work.

A polymorph screen on a new 1:1 co-crystal of caffeine, C8H10N4O2, with anthranilic acid, C7H7NO2, has revealed a rich diversity of crystal forms (two polymorphs, two hydrates and seven solvates, including two sets of isostructural solvates). These forms were prepared by liquid-assisted grinding and solution crystallization, and the crystal structures of nine of these forms have been solved using either single-crystal or powder X-ray data. The structures contain O—H...N and N—H...O hydrogen bonds through which caffeine and anthranilic acid molecules assemble to form zigzag-type chains. These chains can interact in an anti-parallel and offset manner to form cage- or channel-type skeletons within which solvent molecules can be located, giving rise to the diversity of forms observed for this co-crystal. In contrast, an equivalent series of liquid-assisted grinding and solution crystallization experiments with the closely related system of theobromine, C7H8N4O2, and anthranilic acid resulted in the formation of only one 1:1 co-crystal form.

AbstractReaction of manganese (II) thiocyanate with 2,5-dimethylpyrazine leads to the formation of three new coordination compounds of compositions Mn(NCS)2(2,5-dimethylpyrazine)2(H2O)2 (1), Mn(NCS)2(H2O)2(MeOH)2-tris(2,5-dimethylpyrazine) solvate (2), and Mn(NCS)2 (H2O)4-tetrakis(2,5-dimethylpyrazine) solvate (3) that were characterized by single crystal X-ray diffraction. In their crystal structures, the Mn(II) cations are sixfold coordinated by two terminally N-bonded thiocyanato anions and two water molecules as well as by two 2,5-dimethylpyrazine ligands (1), two ethanol (2), or two water molecules (3), within slightly distorted octahedra. In compounds 2 and 3, additional 2,5-dimethylpyrazine ligands are located in the cavities of the structures as solvate molecules. X-ray powder diffraction has shown that compounds 1 and 2 cannot be prepared as pure phases and that batches of compound 3 contain only minor traces of a contamination. Differential thermoanalysis and thermogravimetry have revealed that upon heating of compound 3, an intermediate of composition Mn(NCS)2(2,5-dimethylpyrazine) (4) is formed, which cannot be obtained from solution. To mimic the structure of 4, single crystals of a Cd compound of the same composition (5) were prepared from the liquid phase, and single crystal X-ray analysis has shown that it is isotypic to 4.

The dissolution of the ternary material K6Rb6Si17 in liquid ammonia yields the solvate compound Rb4Si9 ・ 5NH3, which contains fourfold negatively charged nine atom silicon clusters Si94−. Using additionally the [2.2.2] cryptand during the dissolution results in the solvate [K(2.2.2- crypt)]2Si5 ・ 4NH3 , in which the Si52− anion is present in the crystal structure. The Si52− anion has the shape of a nearly ideal trigonal bipyramid. The starting material K6Rb6Si17 contains both Si44− and Si94− Zintl anions. In ammoniate crystal structures, Si94− anions are accessible independently of Si44− anions, and ammonia of crystallisation plays a major role in the observed crystal symmetry. For the cryptate structures of Si52− and Ge52− anions ammonia of crystallisation is obligatory despite the loss of crystal symmetry compared to the crystal structures of the heavier homologues Pb52− and Sn52−.

TeI3[AsF6] is formed from Te, I2, and AsF5 in liquid SO2. At room temperature light red crystals of the hemi SO2 solvate TeI3[AsF6] · 0.5 SO2 are obtained from a saturated solution. The crystal structure (orthorhombic, Pnnm, a=1107.41(2), b=1866.58(3), c=1207.00(2) pm at 123 K, Z =8) consists of pyramidal TeI3+ cations (Te-I = 267 pm), almost regular octahedral [AsF6]− anions and of SO2 molecules which show disorder for the O atom positions. A remarkable feature of the crystal structure is the arrangement of the TeI3+ ions that are pairwise associated, facing each other with the I atoms and forming large voids between each other. This causes the significantly lower density of TeI3[AsF6] · 0.5 SO2 (3.88 Mgm−3) in comparison to the unsolvated form (4.20 Mgm−3, Pass more 1981).

Two new solvates of the widely used anthelminthic Praziquantel (PZQ) were obtained through mechanochemical screening with different liquid additives. Specifically, 2-pyrrolidone and acetic acid gave solvates with 1:1 stoichiometry (PZQ-AA and PZQ-2P, respectively). A wide-ranging characterization of the new solid forms was carried out by means of powder X-ray diffraction, differential scanning calorimetry, FT-IR, solid-state NMR and biopharmaceutical analyses (solubility and intrinsic dissolution studies). Besides, the crystal structures of the two new solvates were solved from their Synchrotron-PXRD pattern: the solvates are isostructural, with equivalent triclinic packing. In both structures acetic acid and 2-pyrrolidone showed a strong interaction with the PZQ molecule via hydrogen bond. Even though previous studies have shown that PZQ is conformationally flexible, the same syn conformation as the PZQ Form A of the C=O groups of the piperazinone-cyclohexylcarbonyl segment is involved in these two new solid forms. In terms of biopharmaceutical properties, PZQ-AA and PZQ-2P exhibited water solubility and intrinsic dissolution rate much greater than those of anhydrous Form A.

The title compound, Rb2O2·2NH3, has been obtained as a reaction product of rubidium metal dissolved in liquid ammonia and glucuronic acid. As a result of the low-temperature crystallization, a disolvate was formed. To our knowledge, only one other solvate of an alkali metal peroxide is known: Na2O2·8H2O has been reported by Grehlet al.[Acta Cryst.(1995), C51, 1038–1040]. We determined the peroxide bond length to be 1.530 (11) Å, which is in accordance with the length reported by Bremm & Jansen [Z. Anorg. Allg. Chem.(1992),610, 64–66]. One of the ammonia solvate molecules is disordered relative to a mirror plane, with 0.5 occupancy for the corresponding nitrogen atom.

Ces travaux de thèse ont pour but d'étudier l'état de dispersion de particules colloïdales dans des cristaux liquides nématiques lyotropes. Ces solvants organisés sont constitués de micelles nanométriques anisotropes. Dans un premier temps, nous montrons qu'il est possible de réaliser des suspensions cinétiquement stables en jouant notamment sur la forme des inclusions micrométriques. Un modèle, développé dans le cadre de cette étude, permet de rendre compte de nos observations. Dans un second temps, nous nous intéressons à l'influence de la diminution de taille de particules sur l'état de dispersion du système. A l'échelle nanométrique, le mouvement brownien, anisotrope dans ce type de milieu, semble gouverner les phénomènes observés.

La spectroscopie RMN alliée à l’utilisation de solvants cristal-liquide fortement et faiblement orientants est une stratégie efficace pour élucider les structures et distributions conformationnelles de petites molécules organiques rigides et flexibles en solution, et déterminer les ordres orientationnel et positionnel des solutés comme des solvants orientés. Dans une première partie, afin d’explorer les différentes contributions aux couplages dipolaires d’un soluté donné, la très faible amplitude de l’ordre orientationnel d’une molécule quasi-sphérique, le tetramethylallène, dissoute dans un nématique thermotrope est exploitée. Dans cette situation limite, le caractère prédominant des mécanismes de réorientation et de vibration moléculaire est mis en évidence, et estimé. Dans une seconde partie, les données RMN obtenues à partir de solutés de petites tailles dissous dans des solvants smectiques sont combinées aux résultats de calculs reposant sur des concepts de thermodynamique statistique et de la théorie de la fonctionnelle de densité. L’efficacité de cette méthode dans la détermination des paramètres d’ordres positionnel du solvant et orientationnel des molécules-sondes est démontrée aussi bien dans le cas de phases conventionnelles smectiques A que celui plus délicat de smectiques interdigitées Ad. La stratégie d’analyse proposée est ensuite étendue à l’investigation des structures tridimensionnelles et équilibres conformationnels de molécules flexibles bioactives ou biomimétiques. Dans une perspective méthodologique, à l’aide d’études expérimentale et théorique portant sur le biphényle, molécule symétrique constituée d’un unique rotor, il est tout d’abord démontré l’intérêt des méthodes de simulations par dynamique moléculaire pour évaluer l’ensemble des couplages dipolaires d’un soluté donné dans une phase thermotrope, ultérieurement utilisés comme paramètres initiaux dans une analyse spectrale itérative, et in fine déterminées précisément. L’analyse spectrale chronophage et dont l’aboutissement est incertain si les paramètres initiaux sont difficiles à estimer, en est ainsi facilitée. Puis, les distributions conformationnelles d’anti-inflammatoires non stéroïdiens de dérivés salicylés et profènes, fluorés ou non, constitués d’un ou deux rotors indépendants sont présentées. Via l’utilisation inédite du modèle AP-DPD dans les solvants nématiques (chiraux) lyotropes faiblement orientants, et à partir des couplages dipolaires homo- et hétéronucléaires notamment obtenus grâce à l’expérience RMN GET-SERF, créée à propos pour permettre l’extraction simple et rapide des couplages 1H-19F, les surfaces d’énergie potentielle de ces biomolécules sont décrites de façon satisfaisante. Enfin, les équilibres conformationnels de deux stilbénoïdes constitués de deux rotors coopératifs sont déterminés dans deux solvants cristal-liquide, l’un fortement, l’autre faiblement orientant. Ces études comparatives permettent de discuter la fiabilité, la précision et l’accessibilité des observables RMN extraites dans les phases, et d’établir la complémentarité des analyses RMN réalisées dans ces solvants
NMR spectroscopy in weakly and highly orienting media is used as a route for dealing with orientational, positional, structural and conformational problems of a variety of small rigid and flexible organic molecules in solution. First, the very weak orientational order of a quasi-spherical molecule dissolved in a nematic phase is exploited for exploring the role of the different contributions to the observed dipolar coupling. In such a limit condition, a predominant effect of the non-rigid reorientation-vibration coupling term emerges. Then, NMR data obtained from small rigid probes dissolved in smectic solvents are combined with a statistical thermodynamic density functional theory, in order to measure the positional order parameters of both solutes and solvent. The methodology gives good results when applied to a conventional smectic A liquid crystal and to the more delicate case of an interdigitated smectic Ad phase. The strategy is subsequently extended to the investigation of structure, order and conformational equilibrium of flexible bioactive or biomimetic molecules dissolved in various partially ordered NMR solvents. A first experimental and theoretical study is presented on the symmetric single-rotor molecule of biphenyl dissolved in a thermotropic liquid crystal. This test-case indicates molecular dynamics simulations are a promising tool for estimating a set of dipolar couplings of a solute in a thermotropic solvent, to be used as starting set of parameters in a standard operator-mediated NMR spectral analysis. Then, we report the conformational study of some single- and two-rotor nonsteroidal anti-inflammatory drugs, belonging to the families of salicylates and profens, dissolved in weakly orienting chiral nematic PBLG phases. A new pulse sequence, the Gradient Encoded heTeronuclear 1H-19F SElective ReFocusing NMR experiment (GET-SERF), is proposed here for the trivial edition of all 1H-19F couplings in one single NMR experiment, for a given fluorine atom. Starting from homo- and heteronuclear dipolar couplings, difficult to extract in thermotropic solvents because of a too complex spectral analysis, the torsional distributions of such molecules can be satisfactory described by the Additive Potential model combined with the Direct Probability Description of the torsional distribution in terms of Gaussian functions (AP-DPD approach). Finally, the conformational and orientational study of two stilbenoids displaying cooperative torsions is discussed in both a highly and weakly ordering liquid crystal phase. This comparative study allows to draw some conclusions on reliability, accuracy and accessibility of desired data in the two phases. Overall, this work proves NMR in liquid crystals is a flexible and meaningful tool for studying order, structure and conformation and it can greatly benefit from the availability of several aligning media inducing a different degree of order

Chapter 7 deals with polymorphism in pharmaceuticals. Following a discussion of the problem of determining the statistics of the occurrence of polymorphism in pharmaceuticals, I present a discussion and examples of the connection between polymorphism and the rate of dissolution and solubility, bioavailability, and the importance of phase changes and mixtures of forms in pharmaceutical preparations. I survey some of the considerations and techniques involved in screening for crystal forms: solvent selection, specific screening for solvates and hydrates, gel crystallization, crystallization in ionic liquids, the challenge of difficult to obtain stable forms and unstable new forms, and the outlook on new techniques and conditions for crystallization. The chapter also deals with polymorphism in pharmaceutical co-crystals, excipients, and amorphous forms and the importance and utility of chemical microscopy in the study of polymorphism of pharmaceuticals.