Gotowe bibliografie tematyczne / Cryorolling

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Części książek
  4. Streszczenia konferencji

Gotowa bibliografia na temat „Cryorolling”

Autor: Grafiati
Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Cryorolling”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Cryorolling"

1

Hussain, Maruff, P. Nageswara Rao, Dharmendra Singh i R. Jayaganthan. "Effect of Pre-Ageing on the Age Hardening Response of Cryorolled Al-Mg-Si Alloy". Applied Mechanics and Materials 877 (luty 2018): 137–48. http://dx.doi.org/10.4028/www.scientific.net/amm.877.137.

Pełny tekst źródła
Streszczenie:
The present work investigates about the effect of pre-ageing on hardening behavior of Al-Mg-Si alloys processed by cryorolling and its age hardening behavior. Ageing conditions were examined at natural ageing for 2days and pre-ageing at 100 °C, 130°C and 170 °C for 4 hours, 2 hours and 30 minutes respectively. The observations revealed that, the pre-ageing before cryorolling is useful to enhance the dislocation density during cryorolling. However artificial ageing of cryorolled samples is not influenced much with pre-ageing. It is revealed that, maturing at room temperature of CR samples for 30 days has resulted better hardening response during artificial ageing.
Style APA, Harvard, Vancouver, ISO itp.
2

Wu, Yuze, Juan Liu, Laxman Bhatta, Charlie Kong i Hailiang Yu. "Study of Texture Analysis on Asymmetric Cryorolled and Annealed CoCrNi Medium Entropy Alloy". Crystals 10, nr 12 (18.12.2020): 1154. http://dx.doi.org/10.3390/cryst10121154.

Pełny tekst źródła
Streszczenie:
CoCrNi equiatomic medium entropy alloy sheets were prepared by asymmetric rolling, cryorolling, and asymmetric cryorolling. The asymmetric cryorolled samples exhibited a noteworthy ultra-fine-grain heterogeneous lamella structure. The microstructure and corresponding hardness obtained by different rolling processes and subsequent annealing are compared. It can be seen from the results that the cryogenic deformation temperature had a stronger effect on the mechanical properties of the medium entropy alloys (MEA), compared with the shear strain caused by the asymmetric cryorolling. The effect of annealing temperature on texture components and volume fractions of the specially rolled samples was also analyzed. The result revealed that the recrystallized MEA exhibited similar texture components and the corresponding volume fraction, which indicated that the rolling process had limited influence on the formation of annealing texture. The recrystallized texture after annealing retained the deformation texture and twin related orientations appeared. Asymmetric rolled MEA showed strong random composition than symmetric rolled MEA regardless of rolling temperature. The recrystallized textures of the species obtained by the three rolling processes did not exhibit a significant dependence on the annealing temperature.
Style APA, Harvard, Vancouver, ISO itp.
3

Shi, Jin Tao, Long Gang Hou, Cun Qiang Ma, Jin Rong Zuo, Hua Cui, Lin Zhong Zhuang i Ji Shan Zhang. "Mechanical Properties and Microstructures of 5052 Al Alloy Processed by Asymmetric Cryorolling". Materials Science Forum 850 (marzec 2016): 823–28. http://dx.doi.org/10.4028/www.scientific.net/msf.850.823.

Pełny tekst źródła
Streszczenie:
Aluminum alloy sheets were asymmetrically rolled at room and cryogenic temperatures by imposing different velocity ratios of 1~1.5 between the upper and bottom rolls. After rolling, the stress-strain curves, microhardness as well as the microstructures of the rolled samples were characterized and analyzed. The experimental results showed that the asymmetric cryorolling could improve the grain refinement and offered (~12%) higher room temperature tensile strength than that processed by symmetrical rolling with velocity ration of 1.0 (~280 MPa). However, at cryogenic temperature, the strength of asymmetrically cryorolling sheet (with velocity ratio of 1.5) was 5.1%, which is less than that processed by symmetrical rolling.
Style APA, Harvard, Vancouver, ISO itp.
4

Li, Zhide, Yuze Wu, Zhibao Xie, Charlie Kong i Hailiang Yu. "Grain Growth Mechanism of Lamellar-Structure High-Purity Nickel via Cold Rolling and Cryorolling during Annealing". Materials 14, nr 14 (19.07.2021): 4025. http://dx.doi.org/10.3390/ma14144025.

Pełny tekst źródła
Streszczenie:
High-purity (99.999%) nickel with lamellar-structure grains (LG) was obtained by room-temperature rolling and cryorolling in this research, and then annealed at different temperatures (75 °C, 160 °C, and 245 °C). The microstructure was characterized by transmission electron microscopy. The grain growth mechanism during annealing of the LG materials obtained via different processes was studied. Results showed that the LG high-purity nickel obtained by room-temperature rolling had a static discontinuous recrystallization during annealing, whereas that obtained by cryorolling underwent static and continuous recrystallization during annealing, which was caused by the seriously inhibited dislocation recovery in the rolling process under cryogenic conditions, leading to more accumulated deformation energy storage in sheets.
Style APA, Harvard, Vancouver, ISO itp.
5

Shi, Yindong, Ming Li, Defeng Guo, Tengyun Ma, Zhibo Zhang, Xiaohong Li, Guosheng Zhang i Xiangyi Zhang. "Extraordinary Toughening by Cryorolling in Zr". Advanced Engineering Materials 16, nr 2 (4.10.2013): 167–70. http://dx.doi.org/10.1002/adem.201300153.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Singh, Rahul, Surya Deo Yadav, Biraj Kumar Sahoo, Sandip Ghosh Chowdhury i Abhishek Kumar. "Phase transformation, Mechanical Properties and Corrosion Behavior of 304L Austenitic Stainless Steel Rolled at Room and Cryo Temperatures". Defence Science Journal 71, nr 03 (17.05.2021): 383–89. http://dx.doi.org/10.14429/dsj.71.16721.

Pełny tekst źródła
Streszczenie:
The present work investigates the effect of rolling (90% thickness reduction) on phase transformation, mechanical properties, and corrosion behaviour of 304L-austenitic stainless steel through cryorolling and room temperature rolling. The processed steel sheets were characterised through X-ray diffraction (XRD), electron backscattered diffraction (EBSD), and vibrating sample magnetometer (VSM). The analysis of XRD patterns, EBSD scan, and vibrating sample magnetometer results confirmed the transformation of the austenitic phase to the martensitic phase during rolling. Cryorolling resulted in improved tensile strength and microhardness of 1808 MPa and 538 VHN, respectively, as compared to 1566 MPa and 504 VHN for room temperature rolling. The enhancement in properties of cryorolled steel is attributed to its higher dislocation density compared to room temperature rolled steel. The corrosion behaviour was assessed via linear polarisation corrosion tests. Corrosion resistance was found to decrease with increasing rolling reduction in both room temperature rolled and cryorolled specimens.
Style APA, Harvard, Vancouver, ISO itp.
7

Wu, Yuze, Shilei Liu, Kaiguang Luo, Charlie Kong i Hailiang Yu. "Deformation mechanism and mechanical properties of a CoCrFeNi high-entropy alloy via room-temperature rolling, cryorolling, and asymmetric cryorolling". Journal of Alloys and Compounds 960 (październik 2023): 170883. http://dx.doi.org/10.1016/j.jallcom.2023.170883.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

D’yakonov, G. S., S. V. Zherebtsov, M. V. Klimova i G. A. Salishchev. "Microstructure evolution of commercial-purity titanium during cryorolling". Physics of Metals and Metallography 116, nr 2 (luty 2015): 182–88. http://dx.doi.org/10.1134/s0031918x14090038.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Das, Jayanta. "Evolution of nanostructure in α-brass upon cryorolling". Materials Science and Engineering: A 530 (grudzień 2011): 675–79. http://dx.doi.org/10.1016/j.msea.2011.10.002.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Fomenko, L. S., A. V. Rusakova, S. V. Lubenets i V. A. Moskalenko. "Micromechanical properties of nanocrystalline titanium obtained by cryorolling". Low Temperature Physics 36, nr 7 (lipiec 2010): 645–52. http://dx.doi.org/10.1063/1.3481266.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Cryorolling"

1

"Formability of aluminum alloys in warm working temperature range". Thesis, 2017. http://localhost:8080/iit/handle/2074/7391.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Feyissa, Fitsum Taye. "Hydroforming of cryorolled AA5083 alloy sheets". Thesis, 2018. http://eprint.iitd.ac.in:80//handle/2074/7962.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Cryorolling"

1

Chourasiya, S. K., i G. Gautam. "Influence of Cryorolling on Spray-Formed Al–Si Alloy". W Lecture Notes in Mechanical Engineering, 269–76. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4018-3_25.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Changela, Kandarp, K. Hariharan i D. Ravi Kumar. "Cryorolling of Aluminum Alloy Sheets and Their Characterization: A Review". W Metal Forming Processes, 77–99. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003226703-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Dhal, A., S. K. Panigrahi i M. S. Shunmugam. "Deformation Behaviour and Fracture Mechanism of Ultrafine-Grained Aluminium Developed by Cryorolling". W Lecture Notes on Multidisciplinary Industrial Engineering, 31–52. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0378-4_2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Dasharath, S. M., i Suhrit Mula. "Microstructures, Mechanical Properties and Strengthening Mechanisms of cast Cu–Al Alloys Processed by Cryorolling". W Springer Proceedings in Physics, 479–82. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29096-6_62.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Vigneshwaran, S., P. Seenuvasaperumal, C. Chinthanai Selvan, R. Palanivel i Mohammad Abdur Rasheed. "Achieving Exceptional Mechanical and Tribological Properties of Metal Matrix Composites through Stir Casting Followed by Cryorolling". W Composite and Composite Coatings, 115–41. New York: CRC Press, 2022. http://dx.doi.org/10.1201/9781003109723-7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Singh, Raj Bahadur, N. K. Mukhopadhyay, G. V. S. Sastry i R. Manna. "Effect of Flash Annealing on Ultra-Fine Grained Low-Carbon Steel Processed Through Equal-Channel Angular Pressing Followed by Cryorolling". W Lecture Notes in Mechanical Engineering, 103–13. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-7892-7_12.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Cryorolling"

1

FEDORIKOVÁ, Alica, Tibor KVAČKAJ, Róbert KOČIŠKO, Jana BIDULSKÁ, Miloslav LUPTAK, Leoš KŘIVSKÝ i Mariia ZIMINA. "The effect of neutron irradiation on mechanical properties of CuCrZr alloys processed by cryorolling". W METAL 2021. TANGER Ltd., 2021. http://dx.doi.org/10.37904/metal.2021.4114.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Zakaria, Siti Aminah, Zuhailawati Hussain i Anasyida Abu Seman. "Selection of sample dipping time in liquid nitrogen prior to cryorolling for Al 1100 alloy". W PROCEEDING OF THE 3RD INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY 2016 (3RD IGNITE-2016): Advanced Materials for Innovative Technologies. Author(s), 2017. http://dx.doi.org/10.1063/1.4993337.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Zakaria, Siti Aminah, Zuhailawati Hussain i Anasyida Abu Seman. "Development of ultrafine-grained 1100 aluminum alloy by cryorolling with the optimized initial heat treatment conditions". W THE 2ND INTERNATIONAL CONFERENCE ON FUNCTIONAL MATERIALS AND METALLURGY (ICoFM 2016). Author(s), 2016. http://dx.doi.org/10.1063/1.4958758.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Cryorolling” dla poszczególnych typów źródeł:
Artykuły w czasopismach
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii