Gotowa bibliografia na temat „Cooperative relay system”

The focus of this thesis is peak-to-average power ratio (PAPR) reduction in cooperative wireless networks which exploit orthogonal frequency division multiplexing in transmission. To reduce the PAPR clipping is employed at the source node. The first contribution focuses upon an amplify-and-forward (AF) type network with four relay nodes which exploits distributed closed loop extended orthogonal space frequency block coding to improve end-to-end performance. Oversampling and filtering are used at the source node to reduce out-of-band interference and the iterative amplitude reconstruction decoding technique is used at the destination node to mitigate in-band distortion which is introduced by the clipping process. In addition, by exploiting quantized group feedback and phase rotation at two of the relay nodes, the system achieves full cooperative diversity in addition to array gain. The second contribution area is outage probability analysis in the context of multi-relay selection in a cooperative AF network with frequency selective fading channels. The gains of time domain multi-path fading channels with L paths are modeled with an Erlang distribution. General closed form expressions for the lower and upper bounds of outage probability are derived for arbitrary channel length L as a function of end-to-end signal to noise ratio. This analysis is then extended for the case when single relay selection from an arbitrary number of relay nodes M is performed. The spatial and temporal cooperative diversity gain is then analysed. In addition, exact form of outage probability for multi-path channel length L = 2 and selecting the best single relay from an arbitrary number of relay nodes M is obtained. Moreover, selecting a pair of relays when L = 2 or 3 is additionally analysed. Finally, the third contribution context is outage probability analysis of a cooperative AF network with single and two relay pair selection from M available relay nodes together with clipping at the source node, which is explicitly modelled. MATLAB and Maple software based simulations are employed throughout the thesis to support the analytical results and assess the performance of algorithms and methods.

This thesis analyzes various beamforming techniques and theories of space information networking (SIN), with the aim of merging and using them in real application. We propose then two algorithm to solve two different problem linked to satellites and beamforming. The first one show a cluster of satellites that performs collaborative beamforming to reach an Earth user, while reducing interference in secondary directions. Then we consider a problem for hybrid satellite-terrestrial relay networks (HSTRNs), where multiple geostationary satellites transmit signals to multiple Earth terminal, with the help of multiple single-antenna relays.

Evolution of wireless services enabled the development of the advanced applications and shifted the paradigms of research in this field from voice to data centric. Such services are spreading like wildfire between users and hence, increasing the demand for large bandwidth. However, the frequency spectrum that is suitable for wireless mobile communications is already assigned to particular services from 400 MHz to several GHz. Also, allocating a large chunk of band continuously from the same part of the spectrum may not be possible due to spectral crowd. Therefore, meeting the demand for high data rate requiring wireless services within the accessible spectrum range becomes a challenging problem. The spectrum allocation policies are discussed by regulatory authorities and academia, and the idea of spectrum sharing systems are addressed as a solution. For instance, heterogeneous networks (HetNets) increase the number of available resources and improve the spectrum accessing capabilities of the wireless communication systems. To achieve this, HetNet nodes are deployed within the coverage of the macrocell regions. Thus, spectral efficiency is boosted via spatial reuse of the same spectral resources. On the contrary, HetNets preclude to fully exploit the resources because of serious interference problems between macrocell and HetNet nodes. Thus, wireless networks of the future will observe interference from even a larger number of sources. Due to co-channel HetNet deployment and denser frequency reuse, interference cancellation is expected to have significant importance for future wireless communication systems. The occupied resources can also be reused as a solution by conducting advanced signal processing algorithms at the receiver to increase the spectral efficiency. While doing so, the proposed approaches are expected to be easily integrated with the existing complementary approaches to improve the capacity further. Besides, new deployment strategies that allow spectrum access for non-licensed users to achieve larger bandwidth become important to increase the spectral efficiency of the HetNets. Within the scope of the dissertation, new solutions are developed for the aforementioned problems of the next-generation wireless communication systems. First, an interference cancellation receiver that exploits the unique characteristics of current waveforms is developed in Chapter 2. Also the unknown model of interference is converted to a known model and new algorithms are proposed to recover the desired signal. Then, another perspective is brought into the subject by transforming the interference problem to an interference advantage in Chapter 3. The idea of co-existence of different types of signals are analyzed to bring another degree of freedom as a solution. The proposed approaches are integrated to the existing complementary approaches, such as interference coordination and power control, to improve the capacity further. Finally, a cooperation mechanism is suggested to facilitate the transmission of signal which has a large bandwidth by integrating the idle bands in Chapter 4. By this way, geo-spatially idle bands within the coverage area are utilized and spectral efficiency is increased.

Cooperative relay systems have emerged as promising techniques to boost the performance of wireless systems. Recent studies have confirmed that interferences, co-channel interferences (CCIs) and self-interferences, have a huge impact on cooperative relay systems and can cause significant performance degradation. Two problems were observed in this research. Firstly, previous studies on performance analysis of Amplify-and-Forward (AF) relay systems in presence of CCIs have only focused on a specific interference channel model. However, in practical design scenarios, such an assumption is not a realistic proposition. Secondly, analyses of overheads introduced by a time-based relay selection protocol in distributed cooperative systems have been based on an over-pessimistic assumption where all packets involved in a collision are destroyed. Nevertheless, collisions due to the protocol overheads cause the system performance to be degraded but this does not mean that the failure of end-to-end transmission certainly occurs. The thesis aims to analyse the performance of practical cooperative relay systems in the presence of CCIs and self-interferences, by developing exact mathematical methods. A new unified mathematical method for AF relay systems in presence of a random number of arbitrary non-identical CCIs was developed. The obtained new approach derived in terms of a moment generating function of the aggregate interferences' power led to the derivation of new explicit expressions. The new results greatly simplify evaluation of average error rates over diverse practical interference scenarios. Moreover, a new exact mathematical analysis for distributed cooperative relay systems employing a time-based relay selection protocol based on an accurate interference model was presented. This approach led to the derivation of new exact expressions for the spectral efficiency which accounts for both self-interferences and the protocol overheads as well as for different fading scenarios and arbitrary relay locations. This approach provided several advantages over direct approaches, one of which is that it significantly simplified averaging-out the joint random variables involved.

Cooperative communications and multiple-input multiple-output (MIMO) communication systems are important topics in current research that will play key roles in the future of wireless networks and standards. In this thesis, the various challenges in accurately detecting and estimating data signals and allocating resources in the cooperative systems are investigated. Firstly, we propose a cross-layer design strategy that consists of a cooperative maximum likelihood (ML) detector operating in conjunction with link selection for a cooperative MIMO network. Two new link selection schemes are proposed, along with an iterative detection and decoding (IDD) scheme that utilises channel coding techniques. Simulation results show the performance and potential gains of the proposed schemes. Secondly, a successive interference cancellation (SIC) detector is proposed for a MIMO system that has dynamic ordering based on a reliability ordering (RO), and an alternative multiple feedback (MF) candidate cancellation method. The complexity of these schemes is analysed and a hard decision feedback IDD system is also proposed. Results show that the proposed detector can give gains over existing schemes for a minimal amount of extra complexity. Lastly, a detector is proposed that is based upon the method of widely linear (WL) filtering and a multiple branch (MB) SIC, for an overloaded, multi-user cooperative MIMO system. The use of WL methods is explained, and a new method of choosing cancellation branches for an MB detector is proposed with an analysis of the complexity required. A list-based IDD system is developed, and simulation results show that the proposed detector can operate in an overloaded system and provide improved performance gains.

: In this thesis, a serially-concatenated coding scheme with a polar code as the outer code and a low density generator matrix (LDGM) code as the inner code is firstly proposed. It is shown that that the proposed scheme provides a method to improve significantly the low convergence of polar codes and the high error floor of LDGM codes while keeping the advantages of both such as the low encoding and decoding complexity. The bit error rate results show that the proposed scheme by reasonable design have the potential to approach a performance close to the capacity limit and avoid error floor effectively. Secondly, a novel transmission protocol based on polar coding is proposed for the degraded half-duplex relay channel. In the proposed protocol, the relay only needs to forward a part of the decoded source message that the destination needs according to the exquisite nested structure of polar codes. It is proved that the scheme can achieve the capacity of the half-duplex relay channel while enjoying low encoding/decoding complexity. By modeling the practical system, we verify that the proposed scheme outperforms the conventional scheme designed by low-density parity-check codes by simulations. Finally, a generalized partial information relaying protocol is proposed for degraded multiple-relay networks with orthogonal receiver components (MRN-ORCs). In such a protocol, each relay node decodes the received source message with the help of partial information from previous nodes and re-encodes part of the decoded message for transmission to satisfy the decoding requirements for the following relay node or the destination node. For the design of polar codes, the nested structures are constructed based on this protocol and the information sets corresponding to the partial messages forwarded are also calculated. It is proved that the proposed scheme achieves the theoretical capacity of the degraded MRN-ORCs while still retains the low-complexity feature of polar codes.