Gotowa bibliografia na temat „Continuous Passive Motion”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Continuous Passive Motion”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Continuous Passive Motion"
Scarlet, JJ. "Continuous passive motion". Journal of the American Podiatric Medical Association 86, nr 4 (1.04.1996): 189–90. http://dx.doi.org/10.7547/87507315-86-4-189.
Pełny tekst źródłaLondon, Nicholas J., Margaret Brown i Raymond J. Newman. "Continuous Passive Motion". Physiotherapy 85, nr 11 (listopad 1999): 616–18. http://dx.doi.org/10.1016/s0031-9406(05)66042-7.
Pełny tekst źródła&NA;. "Continuous Passive Motion". Back Letter 8, nr 6 (czerwiec 1993): 5. http://dx.doi.org/10.1097/00130561-199306000-00004.
Pełny tekst źródłaReinecke, Steven M., Rowland G. Hazard i Kevin Coleman. "Continuous Passive Motion in Seating". Journal of Spinal Disorders 7, nr 1 (luty 1994): 29–35. http://dx.doi.org/10.1097/00002517-199407010-00004.
Pełny tekst źródłaDent, J. A. "Continuous passive motion in hand rehabilitation". Prosthetics and Orthotics International 17, nr 2 (sierpień 1993): 130–35. http://dx.doi.org/10.3109/03093649309164369.
Pełny tekst źródła&NA;. "DOES CONTINUOUS PASSIVE MOTION HELP KNEES?" AJN, American Journal of Nursing 87, nr 8 (sierpień 1987): 1012–13. http://dx.doi.org/10.1097/00000446-198708000-00004.
Pełny tekst źródłaSmith, Jane E. "APPLYING THE CONTINUOUS PASSIVE MOTION DEVICE". Orthopaedic Nursing 9, nr 3 (maj 1990): 54???56. http://dx.doi.org/10.1097/00006416-199005000-00009.
Pełny tekst źródłaSOETERS, J., R. VANDOLDER i S. HOVIUS. "A modified continuous passive motion apparatus". Journal of Hand Surgery: Journal of the British Society for Surgery of the Hand 15, nr 3 (sierpień 1990): 386–87. http://dx.doi.org/10.1016/0266-7681(90)90030-8.
Pełny tekst źródłaCarpenter, Charlotte V. E., i Rouin Amirfeyz. "Continuous Passive Motion Following Elbow Arthrolysis". Journal of Hand Surgery 39, nr 2 (luty 2014): 350–52. http://dx.doi.org/10.1016/j.jhsa.2013.11.040.
Pełny tekst źródłaHussein Mohammed Al-Almoodi, Hamzah, Norsinnira Zainul Azlan, Ifrah Shahdad i Norhaslinda Kamarudzaman. "Continuous Passive Motion Machine for Elbow Rehabilitation". International Journal of Robotics and Control Systems 1, nr 3 (22.10.2021): 402–15. http://dx.doi.org/10.31763/ijrcs.v1i3.446.
Pełny tekst źródłaRozprawy doktorskie na temat "Continuous Passive Motion"
Parsons, Erin M. "Control system design for a continuous passive motion machine". Connect to resource, 2010. http://hdl.handle.net/1811/45477.
Pełny tekst źródłaBittikofer, Raymond P. "A computer controlled continuous passive motion device for ankle rehabilitation". Ohio : Ohio University, 1994. http://www.ohiolink.edu/etd/view.cgi?ohiou1176838831.
Pełny tekst źródłaCooper, Rosa M. "A Policy Guide to Decrease the Use of Continuous Passive Motion Machines". ScholarWorks, 2015. https://scholarworks.waldenu.edu/dissertations/1437.
Pełny tekst źródłaCarus, David Alexander. "The effect of cyclic forces upon finger joints with impaired ranges of motion". Thesis, University of Abertay Dundee, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.313131.
Pełny tekst źródłaCallegaro, Aline Marian. "DESENVOLVIMENTO DE UM EQUIPAMENTO COMPUTADORIZADO DE MOVIMENTAÇÃO PASSIVA CONTÍNUA PARA COTOVELO E ANTEBRAÇO". Universidade Federal de Santa Maria, 2010. http://repositorio.ufsm.br/handle/1/8151.
Pełny tekst źródłaThis research demonstrates the development of a new principle of operation for elbow and forearm continuous passive motion (CPM) equipment. For that were integrated knowledges of Physical Therapy and Production Engineering to make a prototype of a CPM device for the purpose of enabling the programming of various sequences of passive movements of elbow and forearm by means of computerized numerical control (CNC). The conceptual design of prototype mechanical equipment was carried out, as well as the construction and development of a program to specify the principles of operation of the equipment. Computerized CPM allows the independent or synchronized passive movements on two axes: elbow flexion/extension and forearm pronation/supination. The prototype has stepper motors connected to a microcomputer by means of drivers. The motors are controlled by commercial CNC machine software control. The language read and interpreted by this program is generated by other software, this was developed for this equipment to facilitate its use by the Physical Therapists. It has language accessible to this professionals and it allows the insertion of such variables as time and angle. The software calculates the speed of movement with these variables automatically. Data entered into the program are saved and generate a text file with standard CNC language, which is recognized by the program control. The sequences of movements are created by Physical Therapist and adapted to patients according to treatment goals and the individual characteristics. The control software also provides the flexion/extension and pronation/supination range of motion (ROM) passive evaluation, the data of each patient can be stored for monitoring progress and possible reuse. Based on what was done, we can assert that this operating principle can be used in CPM device, the software developed can be used on any machine of this type wich CNC principle of operation and if them have the availability of two axes of movement. This technique can be used to other equipments specific to the health area.
Neste trabalho é demonstrado o desenvolvimento de um novo princípio de operação para equipamentos de movimentação passiva contínua (CPM) para cotovelo e antebraço. Foram integrados conhecimentos de Fisioterapia e Engenharia de Produção para construir um protótipo de um equipamento de CPM que possibilite a programação de variadas sequências de movimentos passivos do cotovelo e antebraço por meio de técnicas empregadas em equipamentos com Comando Numérico Computadorizado (CNC). Foi realizado o projeto conceitual da mecânica do protótipo, sua posterior construção e desenvolvido um programa para especificar os princípios de operação do equipamento. O CPM Computadorizado possibilita os movimentos passivos independentes ou sincronizados em dois eixos: flexão/extensão do cotovelo e pronação/supinação do antebraço. Possui motores de passo, conectados a um microcomputador por meio de driveres. Os motores são comandados por um software controle comercial de máquina CNC. A linguagem lida e interpretada por este programa é gerada por outro software, o qual foi desenvolvido para este equipamento, visando facilitar a utilização pelo fisioterapeuta. Ele disponibiliza, em linguagem acessível ao profissional da área, a inserção de variáveis como tempo e ângulo, com as quais calcula automaticamente a velocidade de movimento. Os dados inseridos no programa são salvos e geram um arquivo texto com linguagem CNC padronizada reconhecida pelo programa controle. As sequências de movimentos são criadas pelo fisioterapeuta e adaptadas aos pacientes, de acordo com os objetivos do tratamento e as características individuais. O software controle proporciona também uma avaliação passiva da amplitude de movimento (ADM) da flexão/extensão e pronação/supinação e os dados de cada paciente podem ser armazenados para acompanhamento da evolução e possível reutilização. Com base no que foi realizado, é possível afirmar que este princípio de operação pode ser empregado em equipamentos de CPM e o software desenvolvido pode ser utilizado em qualquer máquina deste tipo com princípio de operação CNC, onde exista a disponibilidade de dois eixos de movimentos. Esta técnica ainda pode ser utilizada em outros equipamentos específicos da área da saúde.
Callegaro, Aline Marian. "Desenvolvimento e otimização de um equipamento inovador para a reabilitação do cotovelo e antebraço". reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2015. http://hdl.handle.net/10183/127802.
Pełny tekst źródłaThe healthcare service rendering requests new technologies. Physical therapists use equipments from the simplest to the most complex to assist in the developing of functional kinetic diagnosis, prescription, planning, managing, analyzing, monitoring and evaluation of customers’ therapy activities. A need of developing a novel equipment for the elbow and forearm rehabilitation came from the importance of the elbow joint for the daily living activities of people and the complex rehabilitation of elbow and radioulnar joints. These joints require early intervention to prevent joint stiffness, loss of range of motion and strength. Based on this context, the general goal of this PhD thesis is to develop a novel device for elbow and forearm rehabilitation. The specific goals are: (i) analyze the scientific studies and patents about the development of Continuous Passive Motion devices for the elbow and forearm rehabilitation; (ii) analyze functional and operationally the devices for the elbow and forearm rehabilitation which are available in the market; (iii) identify the stakeholder requirements of the device value chain to develop a novel device for the elbow and forearm rehabilitation; (iv) develop the local muscle vibration module of the novel device for the elbow and forearm rehabilitation; (v) develop the Continuous Passive Motion module of the novel device for the elbow and forearm rehabilitation; (vi) evaluate the use of the novel device for the elbow and forearm rehabilitation on human subjects. Management product development process methodogies and tools, as well as experimental tests of the functional prototypes on human subjects were used to achieve the thesis goals. The results include the generation of scientific knowledge about the development of new devices for the health area, as well as a functional prototype of the novel equipment for the elbow and forearm rehabilitation presented as six scientific studies.
Abolfathi, Peter Puya. "Development of an Instrumented and Powered Exoskeleton for the Rehabilitation of the Hand". University of Sydney, 2008. http://hdl.handle.net/2123/3690.
Pełny tekst źródłaWith improvements in actuation technology and sensory systems, it is becoming increasingly feasible to create powered exoskeletal garments that can assist with the movement of human limbs. This class of robotics referred to as human-machine interfaces will one day be used for the rehabilitation of paralysed, damaged or weak upper and lower extremities. The focus of this project was the development of an exoskeletal interface for the rehabilitation of the hands. A novel sensor was designed for use in such a device. The sensor uses simple optical mechanisms centred on a spring to measure force and position simultaneously. In addition, the sensor introduces an elastic element between the actuator and its corresponding hand joint. This will allow series elastic actuation (SEA) to improve control and safely of the system. The Hand Rehabilitation Device requires multiple actuators. To stay within volume and weight constraints, it is therefore imperative to reduce the size, mass and efficiency of each actuator without losing power. A method was devised that allows small efficient actuating subunits to work together and produce a combined collective output. This work summation method was successfully implemented with Shape Memory Alloy (SMA) based actuators. The actuation, sensory, control system and human-machine interface concepts proposed were evaluated together using a single-joint electromechanical harness. This experimental setup was used with volunteer subjects to assess the potentials of a full-hand device to be used for therapy, assessment and function of the hand. The Rehabilitation Glove aims to bring significant new benefits for improving hand function, an important aspect of human independence. Furthermore, the developments in this project may one day be used for other parts of the body helping bring human-machine interface technology into the fields of rehabilitation and therapy.
Liang, Shu-Ting, i 梁舒婷. "Assessment of knee behaviors when using a continuous passive motion device". Thesis, 2005. http://ndltd.ncl.edu.tw/handle/57336746892847764172.
Pełny tekst źródła長庚大學
復健科學研究所
94
Background and Purpose: All joints should be moved after the operation to prevent the stiff or deterioration of peripheral joint. Continuous passive motion instrument (CPM) is an external motorized device and it enables a joint to move passively. At presents, it becomes one of selection of rehabilitation therapy tool. In the past study, although the joint influenced by the speed and relevant joints when was stretched repeatedly. But it did not aim at the parameters of CPM instrument such as the regulation of postures and velocities during the CPM machine motion in clinical. The purpose of this study was to investigate the consistency of joint angle with CPM instrument. Methods: Two electrogoniometers were used to record the varied range of motion of knee joint and the CPM machine. The first thing was to confirm angles shown on the operation panel with the real angle monitored on the CPM machine. The measurement of consistency of joint angle was to expect asking for thirty healthy subjects and five patients following the knee problem. In the study, it had two topic groups and separated the different velocities (slow, moderate, and fast) and postures (supine-lying, semi-lying, and upright). They were randomized assign to an item of the different topic groups. Results: There were statistically significant different between CPM and CPM (EG) of flexion (p<0.001) and extension (p<0.001). There were statistically significant different between CPM (EG) and knee at all velocities (p<0.001) and all postures (p<0.001) in the control group, there were not statistically significant different between the velocities in all times (p>0.05). There were statistically significant different between the postures in all times (p<0.05). In the patient group, there were not statistically significant different between the velocities and postures in all times (p>0.05). The angle differences of the patient group were smaller than the control group in all condition. Conclusion: Although the CPM machine and CPM(EG) had highly correlation within full range, it had lower correlation at start to flex or extend about 40°. The differences between CPM machine and CPM(EG) were not over 10°. There were no consistency between the angle of CPM (EG) and knee at all velocities and postures. The angle differences did not significant change by velocities, but it significant changed by postures. And the different mainly occurred in the upright posture. But the changes did not significant occur on the patient group. Clinical Relevance: It suggested that the angles were not consistent entirely during the CPM machine motion. To obtain treatment effects, we should calibrate on a regularly and consider the angle differences at all condition.
Huang, Pei-Shan, i 黃珮珊. "The research and development of a continuous passive motion machine for wrist and hand". Thesis, 2004. http://ndltd.ncl.edu.tw/handle/92894889100694737254.
Pełny tekst źródła國立陽明大學
復健科技輔具研究所
92
Background and objective:There are many reasons that cause hand disease through clinical examinations, such as fracture, tendon rupture, burns, arthritis etc. Rehabilitation is often used to prevent from evolved hand disease. Therefore, the purpose of this study is to build a hand CPM (continuous passive motion) machine for rehabilitation. The machine is designed according to the suggestions of the orthopedists and physical therapists and the function refers to the rehabilitative motions which are radial deviation, ulnar deviation, extension, hyperextension of wrists and adduction, abduction, flexion, extension of fingers. Methods:The research process is divided into three phases. The first phase is to conduct a literature review and to sum up the criteria such as motions, angles, and forces of the machine. The second phase goes on to design the mechanism and manufacture of the machine according to the criteria, and followed with the safety and functional tests of the machine. Finally, the third phase is to examine the Colles’ fracture patients who use the machine and investigate the patients through the process of rehabilitation in order to verify the validities by the clinical examinations. Results:It shows that this study of rehabilitation machine is not only to reach the functional requests of wrist and fingers, but also to increase the patient’s ROM(Range of motion). After the six weeks of rehabilitation, the average value of progress of the three subjects’ wrist flexion was 、wrist hyperextension was 、wrist radial deviation was 、wrist radial deviation was .Besides, there was no one hurt in the clinical examinations. Conclusion:The rehabilitation machine of this study includes both wrist and hand rehabilitation, and user can adjust the parameters which are time, pressure, pulling force and angle. The rehabilitation machine of this study has verified its efficacy under the clinical examinations.
Chang, Chih-zen, i 張智仁. "Development of the Human Hand Motor Control Assessment and Continuous Passive Motion Rehabilitation Training System". Thesis, 2000. http://ndltd.ncl.edu.tw/handle/96972116542116102792.
Pełny tekst źródła長庚大學
機械工程研究所
88
Impairment of volitional motor activity is common after stroke, head injury, spinal cord injury and other conditions of upper motor neuron dysfunction. This finding is particularly relevant in stroke patients who have achieved substantial recovery of speech and gait, but volitional motor activity of the hand remained incomplete or absent. Therefore, the evaluation and training of the hand motor control functions become an important part of the rehabilitation therapy for these patients. In view of the above, this study is made aimed at the clinical needs of the upper motor neuropathy patients by combining the efforts of doctors, rehabilitation therapists and engineers and by integrating the sensors, computerized images, feedback controls and computer technologies for developing and pioneering a human hand motor control assessment and training system as well as a hand continuous passive motion rehabilitation training system for the patients. This study will be proceeded by dividing it into three parts, the first part was using the 5DT gloves available in the market and combining which with the hardware units of hand/palm pressure measurement module, digit hand-writing pad module and biofeedback hand dexterity assessment, training module, etc. to design and develop a hand motor control assessment and training system, whose functions include: articulation activity real time measurement and display, hand/palm pressure measurement, virtual 3D palm interaction display, hand-writing performance evaluation, etc.; the second part was to design a hand continuous passive motion (CPM) mechanical glove, which has 5 tendon driven fingers, each has a 2 degree of freedom. With the aid of interacting windows and post-treatment database, the goal of continuous passive motion and functional movement training can then be achieved. While the third part was using the hand motor control assessment and training system developed in to use to carry out clinical evaluations and experiments on hand motor control functions for 13 normal individuals and 26 patients with focal dystonia (such as patients with writer''s cramp). Tests were conducted in 2 modes of: writing without wearing the glove, writing by wearing the glove with hand/palm pressure sensors. The main evaluation items included as follows : the hesitation time during writing, the number of letters written, the delay time for starting writing, the contact pressure of hand against paper during writing, the contact pressure of hand against pen during writing. The experimental were analyzed. The results showed apparent differences between normal subject and patients with writing contraction disease, for example, the average hesitation time per letter of the patient group was 3.5 times longer than that of the normal subject group, the delay time for starting writing of the former group was 2.25 times as longer as that of the latter, moreover, the pen/paper contact pressures of the former were 1.43 times higher than those of the latter. With the accomplishment of this study, the developed hand motor control assessment and continuous passive motion rehabilitation training system not only can be immediately provided for evaluation and rehabilitation training by the clinical physicians for patients with hand motor control function disorders, but also can be synchronously used to collect physical signals (such as articulation activity degrees, finger/palm pressures, etc.) of the patients during the course of rehabilitation training. Quantitative index introduces in this study may be used for evaluating the therapeutic effects of the palm motor control functions of the patients. Besides, the prototype of the pioneered system should have the potential of applying for patent, and the design conception, software/hardware of the developed system can be transferred to the relevant medical industries in order to inspire the interest of people in researching, developing and manufacturing high-tech rehabilitation treatment apparatus, thus promote the upgrading of domestic medical care industry.
Książki na temat "Continuous Passive Motion"
Salter, Robert Bruce. Continuous passive motion (CPM): A biological concept for the healing and regeneration of articular cartilage, ligaments, and tendons : from origination to research to clinical applications. Baltimore: Williams & Wilkins, 1993.
Znajdź pełny tekst źródłaSalter, Robert Bruce. Textbook of disorders and injuries of the musculoskeletal system: An introduction to orthopaedics, fractures, and joint injuries, rheumatology, metabolic bone disease, and rehabilitation. Wyd. 3. Baltimore: Williams & Wilkins, 1999.
Znajdź pełny tekst źródłaTextbook of disorders and injuries of the musculoskeletal system. Wyd. 3. Baltimore: Williams & Wilkins, 1999.
Znajdź pełny tekst źródłaZarnett, Mark Eric Rick. The cellular origin of neochondrogenesis produced by periosteal grafts subjected to continuous passive motion. 1985.
Znajdź pełny tekst źródłaRodger, Robert Mark. The immunological fate of allogeneic periosteum transplanted into an osteochondral defect and exposed to continuous passive motion. 1987.
Znajdź pełny tekst źródłaEffects of continuous passive motion and immobilization on synovitis and cartilage degradation in antigen-induced arthritis: An experimental investigation in the rabbit. Ottawa: National Library of Canada, 1996.
Znajdź pełny tekst źródłaSalter, Robert. Continuous Passive Motion: A Biological Concept for the Healing and Regeneration of Articular Cartilage, Ligaments, and Tendons : From Origination to Research to Clinical. Williams & Wilkins, 1992.
Znajdź pełny tekst źródłaMurnaghan, John J. *. The effect of continuous passive motion on the prevention of intra-articular adhesions as a complication of surgical synovectomy of the knee joint: an experimental investigation in the rabbit. 1989.
Znajdź pełny tekst źródłaArthur, Richard T. W. Monads, Composition, and Force. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198812869.001.0001.
Pełny tekst źródłaFung, C. Victor. Complementary Bipolar Continua in Music Education. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780190234461.003.0005.
Pełny tekst źródłaCzęści książek na temat "Continuous Passive Motion"
Deaconescu, Andrea, i Tudor Deaconescu. "Pneumatic Equipment for Ankle Rehabilitation by Continuous Passive Motion". W Advances in Service and Industrial Robotics, 13–21. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-48989-2_2.
Pełny tekst źródłaFriemert, B., C. Bach, W. Schwarz i H. Gerngroß. "Bewegungsschienen in der Nachbehandlung der VKB-Plastik — „controlled active motion“ versus „continuous passive motion“ / Motion Machines in Treatment of ACL Reconstructed Patients: “Controlled Active Motion” Versus “Continuous Passive Motion”". W Deutsche Gesellschaft für Chirurgie, 393. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-56458-1_135.
Pełny tekst źródłaAng, C. T., N. A. Hamzaid, Y. P. Chua i A. Saw. "Continuous Passive Ankle Motion Device for Patient Undergoing Tibial Distraction Osteogenesis". W IFMBE Proceedings, 112–15. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21729-6_31.
Pełny tekst źródłaKantar, Susanna Stignani, i Isabella Fusaro. "Rehabilitation, Use of Elbow Braces, and Continuous Passive Motion After Elbow Arthroplasty". W Elbow Arthroplasty, 303–20. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14455-5_29.
Pełny tekst źródłaFriemert, B., C. Bach, W. Schwarz i H. Gerngroß. "Bewegungsschienen in der Nachbehandlung von Patienten mit VKB-Plastik — “controlled active motion” versus “continuous passive motion”". W Deutsche Gesellschaft für Chirurgie, 413–15. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-56698-1_107.
Pełny tekst źródłaShen, Zefang, Tele Tan, Garry Allison i Lei Cui. "A Customized One-Degree-of-Freedom Linkage Based Leg Exoskeleton for Continuous Passive Motion Rehabilitation". W Mechanisms and Machine Science, 518–26. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-03320-0_57.
Pełny tekst źródłaWall, Alun, i Tim Board. "The Biological Effect of Continuous Passive Motion on the Healing of Full-Thickness Defects in Articular Cartilage. An Experimental Investigation in the Rabbit". W Classic Papers in Orthopaedics, 437–39. London: Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5451-8_111.
Pełny tekst źródłaBATAVIA, M. "Continuous Passive Motion". W Contraindications in Physical Rehabilitation, 714–22. Elsevier, 2006. http://dx.doi.org/10.1016/b978-141603364-6.50053-7.
Pełny tekst źródłaO'Driscoll, Shawn W. "Continuous Passive Motion". W Morrey's The Elbow and Its Disorders, 160–63. Elsevier, 2009. http://dx.doi.org/10.1016/b978-1-4160-2902-1.50015-2.
Pełny tekst źródłaMorrey, Bernard F. "Continuous Passive Motion". W Morrey's the Elbow and its Disorders, 171–72. Elsevier, 2018. http://dx.doi.org/10.1016/b978-0-323-34169-1.00015-2.
Pełny tekst źródłaStreszczenia konferencji na temat "Continuous Passive Motion"
de Paula Cintra Borges, Isabella, João Carvalho i Rogério Sales Gonçalves. "A Continuous Passive Motion Aquatic Device". W 24th ABCM International Congress of Mechanical Engineering. ABCM, 2017. http://dx.doi.org/10.26678/abcm.cobem2017.cob17-0661.
Pełny tekst źródłaSaputra, Michael Kharis, i Aulia Arif Iskandar. "Development of automatic Continuous Passive Motion therapeutic system". W 2011 2nd International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering (ICICI-BME). IEEE, 2011. http://dx.doi.org/10.1109/icici-bme.2011.6108630.
Pełny tekst źródłaUetsuji, Sakura, Nattawat Kingsuvangul, Boonyawee Boonyasurakul i Warakorn Charoensuk. "Hand exoskeleton for continuous passive motion postoperative rehabilitation". W 2017 10th Biomedical Engineering International Conference (BMEiCON). IEEE, 2017. http://dx.doi.org/10.1109/bmeicon.2017.8229149.
Pełny tekst źródłaSchievelbein, Guilherme, Cristina Paludo Santos i Alexandre dos Santos Roque. "Fuzzy control methodology for continuous passive motion equipment". W 2016 IEEE International Conference on Automatica (ICA-ACCA). IEEE, 2016. http://dx.doi.org/10.1109/ica-acca.2016.7778433.
Pełny tekst źródłaDeaconescu, Tudor T., Andrea I. Deaconescu, Sio-Iong Ao, Alan Hoi-Shou Chan, Hideki Katagiri i Li Xu. "Pneumatic Muscle Actuated Equipment for Continuous Passive Motion". W IAENG TRANSACTIONS ON ENGINEERING TECHNOLOGIES VOLUME 3: Special Edition of the International MultiConference of Engineers and Computer Scientists 2009. AIP, 2009. http://dx.doi.org/10.1063/1.3256258.
Pełny tekst źródłaHaghshenas-Jaryani, Mahdi, Wei Carrigan, Caleb Nothnagle i Muthu B. J. Wijesundara. "Sensorized soft robotic glove for continuous passive motion therapy". W 2016 6th IEEE International Conference on Biomedical Robotics and Biomechatronics (BioRob). IEEE, 2016. http://dx.doi.org/10.1109/biorob.2016.7523728.
Pełny tekst źródłaViswanathan, M., M. Jorgensen, N. Kittusamy i F. Biggs. "69. Field Evaluation of a Continuous Passive Lumbar Motion System". W AIHce 2005. AIHA, 2005. http://dx.doi.org/10.3320/1.2758659.
Pełny tekst źródłaAlipour, A., i M. J. Mahjoob. "A rehabilitation robot for continuous passive motion of foot inversion-eversion". W 2016 4th International Conference on Robotics and Mechatronics (ICROM). IEEE, 2016. http://dx.doi.org/10.1109/icrom.2016.7886763.
Pełny tekst źródłaDubey, Sarthak, Rishabh Berlia, Shubham Kandoi, Theja Ram Pingali, Anurag Shivaprasad, Arpit Anand Varshney, Niranjana Krishnadas i Niharika A. Patel. "Semi-automatic continuous passive motion physiotherapeutic device for post stroke patients". W 2014 International Conference on Circuits, Communication, Control and Computing (I4C). IEEE, 2014. http://dx.doi.org/10.1109/cimca.2014.7057783.
Pełny tekst źródłaRajestari, Z., N. Feizi i S. Taghvaei. "Kinematic synthesis and optimization of Continuous Passive Motion mechanisms for knee". W 2017 7th International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO). IEEE, 2017. http://dx.doi.org/10.1109/icmsao.2017.7934896.
Pełny tekst źródła