Gotowe bibliografie tematyczne / Construction standards

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Construction standards”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 25 kwietnia 2022

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Construction standards”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Construction standards"

1

Yates, Janet K., i Stylianos Aniftos. "International Standards and Construction". Journal of Construction Engineering and Management 123, nr 2 (czerwiec 1997): 127–37. http://dx.doi.org/10.1061/(asce)0733-9364(1997)123:2(127).

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Cottingham, Katie. "Proteomics Projects: Metabolomics Standards Initiative: standards under construction". Journal of Proteome Research 6, nr 2 (luty 2007): 440. http://dx.doi.org/10.1021/pr070722q.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Walsh, I. D. "European standards in road construction". Proceedings of the Institution of Civil Engineers - Construction Materials 163, nr 4 (listopad 2010): 195–200. http://dx.doi.org/10.1680/coma.900007.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Tong, Y., i Y. Ma. "DIGITAL MUSEUM CONSTRUCTION STANDARDS STUDY". International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLVI-M-1-2021 (28.08.2021): 753–60. http://dx.doi.org/10.5194/isprs-archives-xlvi-m-1-2021-753-2021.

Pełny tekst źródła
Streszczenie:
Abstract. In the post-epidemic era, with the development of digital information technology, there is an extremely urgent need for the construction of digital museums in the field of cultural and museums. However, there is no unified consensus on the concept, function and form of digital museums at home and abroad. The author believes that digital museums are a special form of traditional physical museums and should give full play to digital features and advantages to meet the needs of online and offline integration. This paper is oriented to the practical problems that exist in the realization of the basic functions of traditional physical museums based on collection, management, storage, research, exhibition, education and popularization, and public services. By collating the current standards of digital museums, analyzing the new forms of digital museums domestically and abroad, clarifying the mission of digital museums, proposing the construction and development of digital museums around “human experience”, exploring the standards of digital museum construction, and promoting the industry consensus and standardized management of digital museum construction.
Style APA, Harvard, Vancouver, ISO itp.
5

Bubshait, Abdulaziz A., i Tawfiq H. Al-Atiq. "ISO 9000 Quality Standards in Construction". Journal of Management in Engineering 15, nr 6 (listopad 1999): 41–46. http://dx.doi.org/10.1061/(asce)0742-597x(1999)15:6(41).

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Yates, Janet K., i Stylianos Aniftos. "Engineering and Construction Industry Standards Developers". Journal of Management in Engineering 13, nr 3 (maj 1997): 31–39. http://dx.doi.org/10.1061/(asce)0742-597x(1997)13:3(31).

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Yang, Lei, Hao Yu i Dongya Wu. "Construction of Internet Plus Standards System". Chinese Journal of Engineering Science 22, nr 4 (2020): 124. http://dx.doi.org/10.15302/j-sscae-2020.04.018.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

LEDERMAN, REGINA P. "Standards for Test Construction and Revision". MCN, The American Journal of Maternal/Child Nursing 17, nr 1 (styczeń 1992): 41. http://dx.doi.org/10.1097/00005721-199201000-00015.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Авилова, Irina Avilova, Крутилова i Mariya Krutilova. "ECONOMIC INCENTIVES FOR GREEN BUILDING STANDARDS". Bulletin of Belgorod State Technological University named after. V. G. Shukhov 2, nr 1 (8.12.2016): 201–6. http://dx.doi.org/10.12737/24024.

Pełny tekst źródła
Streszczenie:
Sustainable development of the construction industry of the country is focused on permanent growth of its energy and resource efficiency, and involves the introduction of the practice of design and economic analysis of the eco-oriented principles of assessment, monitoring and management. Reform in the field of construction pricing and revaluation of the key principles for determining the cost of construction products should be aimed at improving the existing arrangements for the assessment of energy costs and environmental damage in the construction, integration at the legislative level in developing resource method of determining the estimated cost of construction, the establishment of transparent and effective environmental auditing mechanism construction. The development of the construction industry market in the aspect of environmental conservation is one of the most urgent problems and suggests improvement and analysis of methods for pricing for construction products, the search for new solutions eco-oriented, which in turn implies a transition to green building.
Style APA, Harvard, Vancouver, ISO itp.
10

Han, Ying, i Xu Feng Tao. "Comparison of Standards for Accessible Design between America and China". E3S Web of Conferences 38 (2018): 03003. http://dx.doi.org/10.1051/e3sconf/20183803003.

Pełny tekst źródła
Streszczenie:
Aiming at the accessibility design and environmental constructions of China, comparing the differences of codes for accessibility design between domestic and abroad. It’s including four aspects: the difference in audience of accessible design, content of the facilities, quantitative indexes and vision and hearing accessible design. It analyzed that the early stage of our country is backward in terms of accessibility and construction, mainly based on differences in values and professional education. In the end it put forward three suggestions to improve the construction of barrier-free environment in China.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Construction standards"

1

Metlen, Tate. "LEED Construction and Performance Standards Mission Accomplishment". Thesis, Old Dominion University, 2014. http://hdl.handle.net/10945/42451.

Pełny tekst źródła
Streszczenie:
CIVINS Capstone Report
CIVINS
The general focus of this project is on the current state of Leadership in Energy and Environmental Design (LEED) building requirements and mission statement accomplishment. The report includes the background, requirements, and performance of LEED certified buildings, and identifies key issues with the current system. In particular, the report explores the failure of buildings construct to LEED standards to achieve the advertised energy savings. Solutions and avenues to implementation of the solutions are then offered.
Style APA, Harvard, Vancouver, ISO itp.
2

Hager, Cassandrea Jane. "Developing standards for undergraduate university construction education internship programs". Texas A&M University, 2003. http://hdl.handle.net/1969.1/2294.

Pełny tekst źródła
Streszczenie:
Personally observed variability among construction education internship programs prompted this investigation. The schools of construction that form the Associated Schools of Construction (ASC) encourage its members to provide curricula that produces qualified professionals for the construction industry. There is agreement within ASC that a practical component along with classroom curriculum is needed for construction students?? education (Senior, 1997). Although construction programs have different ways of accomplishing this experiential component, most do have some sort of internship or cooperative program (Chapin, et al., 2003). Construction internships vary greatly from one program to the next ?? in length, supervision, academic deliverables, and whether credit is earned. No common set of internship field experience standards or best-practices guidelines have been developed for construction education. This study was divided into three subproblems. Subproblem One describes the status of construction internship programs currently administered in selected American undergraduate universities. Subproblem Two identifies elements that students, companies and schools perceive to support valuable, satisfying internship experiences. And, Subproblem Three incorporates findings from Subproblems One and Two to identify common elements to provide a structure for construction internship programs, in order to develop a set of guidelines for construction education internship programs. Three constituencies were surveyed: 1) university undergraduate construction programs, 2) construction companies, and 3) students of the respective construction programs. The school survey utilized ASC membership rosters to survey 91 schools, with 56 participating (62%). The company survey randomly sampled 200 of the Top 400 U.S. Construction Companies listed in Engineering News Record??s ENR Sourcebook 2003, with 75 participating (37.5%). The student survey had 31 students from eleven schools in nine different states voluntarily participate. Univariate analyses on only one variable at a time served to describe the survey population, and by extension, the population from which the sample was selected. The data were analyzed utilizing frequency percentages and summary averages including mode and mean. Based on the findings of this study, it was concluded that a set of ??best-practices?? guidelines were needed for construction education internship programs. A set of best practices guidelines for developing construction education internship programs are provided.
Style APA, Harvard, Vancouver, ISO itp.
3

Lettis, Sally. "On the construction of statistical standards for human growth". Thesis, University of Exeter, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.328453.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Schrapers, Manuel. "Applying standards, guidelines and methods in construction project management". Thesis, Edinburgh Napier University, 2018. http://researchrepository.napier.ac.uk/Output/1253601.

Pełny tekst źródła
Streszczenie:
This dissertation scrutinizes the application of various standards, guidelines and methods in construction project management, and examines the use of such methods, tools and applications. Even though the availability of literature in the context of PM is extensive there has not been an adequate focus on applied project management with a specific interest in the constructing project management. This study describes the experiences gathered by the interviewees who are experienced construction executives and also discusses how they have managed their projects. The reason for the selection of a subjective, descriptive and phenomenal research approach is described and the advantages for this philosophical stance are also mentioned in the thesis. The question that emerges is in regards with how the construction managers accomplish any given project and how they ‘live' their PM. Hence, this study investigated the relevance of PM for managers working on construction projects. Various techniques, methods and procedures which were not included in the literature were highlight by the participants. There are studies available, mainly empirical, in the context of applied PM methods and the results of these studies do not correspond with the findings of this research. Another finding is that, in general, from the responses received, it is clear that PM certification programmes provide limited value to an experienced construction manager. Further results were summarized in the findings and result chapter of this work.
Style APA, Harvard, Vancouver, ISO itp.
5

Olayé, Ralph Ajéran 1975. "Sensitivity of infrastructure performance to initial design and construction standards". Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/43523.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Hägglund, Maria. "Parking standards in Stockholm". Thesis, KTH, Fastigheter och byggande, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-147639.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Maradza, Energy Nyasha. "Adaptation of industry BIM process standards in a large construction firm". Thesis, University of Reading, 2015. http://centaur.reading.ac.uk/69851/.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Yu, Autumn Chau Sheung. "The construction of low cost budget standards and their use in assessing the living standards of families on low income". Thesis, University of York, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.359307.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Samman, Tamim Abdulhadi. "Indeterminate reinforced concrete frames subjected to inelastic cyclic deformation". Diss., The University of Arizona, 1987. http://hdl.handle.net/10150/184307.

Pełny tekst źródła
Streszczenie:
Four full-size statically indeterminate reinforced concrete frames with two symmetrical bays were tested to obtain sufficient data to evaluate the adequacy of the current ACI-ASCE Committee 352 design recommendations, as well as to determine whether a relaxation of some of the limits in these guidelines can be justified. Each specimen contained three 8.5-foot-long columns, connected at mid-height by two 9-foot-long beams. Initially, a constant axial load was applied to each column. The specimens were then subjected to a displacement-controlled loading schedule to simulate the type of displacements a frame may experience during a severe earthquake. In designing the specimens, the latest recommendations of the ACI-ASCE Committee 352 and the ACI building code ACI 318-83 were satisfied except for the following modifications: (1) the flexural strength ratio (M(R)) in the second specimen was reduced from 1.4 to 1.2, (2) the shear-stress factors (γ) in the joints of the third specimen were increased from 12 and 15 to 15 and 20 for the exterior and interior joints respectively, and (3) the number of the transverse reinforcements inside the right exterior joint in the fourth specimen was reduced from 4 to 2 sets of hoops. The conclusion inferred from the results indicate that for drift levels within the elastic range, the elongations and the rotations of the beam regions near the faces of the columns, in addition to the joint shear strains, were not affected by the design values for the primary variables in the last three specimens. For larger excursions into the inelastic range, the relaxation of the current Committee 352 design recommendations in the last three specimens not only showed a significant effect in reducing the elongations and the rotations of the beams, or in increasing the joint shear strains but led to lower energy dissipation of the specimens. Consequently, the current design guidelines by the ACI-ASCE Committee 352 yield statically indeterminate frames which exhibit sufficient ductility.
Style APA, Harvard, Vancouver, ISO itp.
10

Wiersma, Mark Edward. "Standards and benchmark tests for evaluating large scale manipulators with construction applications". Thesis, Monterey, California. Naval Postgraduate School, 1995. http://hdl.handle.net/10945/26265.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Construction standards"

1

Facilities, United States Veterans Administration Office of. Construction standards. Washington, DC: The Administration, Office of Facilities, 1988.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Vance, Mary A. Concrete construction standards. Monticello, Ill: Vance Bibliographies, 1985.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Institution, British Standards. Construction Standards Manual. London: British Standards Institution, 1996.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Administration, United States Occupational Safety and Health. Electrical standards for construction. [Washington, D.C.]: U.S. Dept. of Labor, Occupational Safety and Health Administration, 1989.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

United States. Occupational Safety and Health Administration. Electrical standards for construction. [Washington, D.C.]: U.S. Dept. of Labor, Occupational Safety and Health Administration, 1989.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

United States. Occupational Safety and Health Administration. Electrical standards for construction. [Washington, D.C.]: U.S. Dept. of Labor, Occupational Safety and Health Administration, 1989.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Colorado. Department of Transportation. Project Development Branch. Standard plans: M & S standards. [Denver, Colo.]: Colorado Dept. of Transportation, Project Development Branch, 2006.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Thomas, Deborah J. Comstock Historic District construction standards. Wyd. 3. [S.l: Comstock Historic District Commission, 2005.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

United States. Occupational Safety and Health Administration. Construction industry standards and interpretations. Washington, D.C: U.S. Dept. of Labor, Occupational Safety and Health Administration, 1990.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Construction safety and the OSHA standards. Boston: Prentice Hall, 2010.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Construction standards"

1

Hore, A. V., J. G. Kehoe, R. McMullan i M. R. Penton. "Measurement Standards". W Construction 1, 121–37. London: Macmillan Education UK, 1997. http://dx.doi.org/10.1007/978-1-349-13932-3_9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

O’Brien, James J. "Codes and Standards". W Construction Inspection Handbook, 37–48. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6017-3_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Goldbloom, Joseph. "National Reference Standards". W Engineering Construction Specifications, 170–74. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4684-1452-3_7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

O’Brien, James J. "Codes and Standards". W Construction Inspection Handbook, 33–44. Boston, MA: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4757-1191-2_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Duncan, William. "Set Program Construction Standards". W Substantial Rehabilitation & New Construction, 35–36. Boston, MA: Springer US, 1991. http://dx.doi.org/10.1007/978-1-4684-6539-6_8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Abdulmajeed, Bariq W., i Meervat R. Altaie. "Regulation of Supplier Standards in Iraq: Through Sustainability Standards". W Geotechnical Engineering and Sustainable Construction, 715–25. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-6277-5_57.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Ambrose, James. "Building Codes and Industry Standards". W Building Construction and Design, 33–36. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-6583-3_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Shraim, Mustafa. "Auditing standards for construction projects". W Quality Auditing in Construction Projects, 109–19. Abingdon, Oxon ; New York, NY : Routledge, [2019]: Routledge, 2019. http://dx.doi.org/10.1201/9781351201872-3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Riccardi, Lorenzo. "Accounting Standards for Business Enterprises No. 15—Construction Contracts". W China Accounting Standards, 97–103. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-10-0006-5_19.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Reddy, B. V. Venkatarama, Jean-Claude Morel, Paulina Faria, P. Fontana, Daniel V. Oliveira, I. Serclerat, P. Walker i Pascal Maillard. "Codes and Standards on Earth Construction". W RILEM State-of-the-Art Reports, 243–59. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-83297-1_7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Construction standards"

1

Stukhart, George, i Stephen L. Pearce. "Construction Bar Code Standards". W 5th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction (IAARC), 1988. http://dx.doi.org/10.22260/isarc1988/0044.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Stark, Jan W. B. "European Standards for Composite Construction". W Composite Construction in Steel and Concrete IV Conference 2000. Reston, VA: American Society of Civil Engineers, 2002. http://dx.doi.org/10.1061/40616(281)72.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Tarefder, Rafiqul A., Musharraf M. Zaman i Cheong F. Ting. "Testing RAP Materials for Overlay Design Standards". W Construction Research Congress 2005. Reston, VA: American Society of Civil Engineers, 2005. http://dx.doi.org/10.1061/40754(183)106.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Andersson, Niclas, i Jerker Lessing. "Industrialized and Project-Based Construction - Standards Versus Business Models". W Creative Construction Conference 2019. Budapest University of Technology and Economics, 2019. http://dx.doi.org/10.3311/ccc2019-052.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

O'Connor, James T., i Mark J. Hubers. "Status and Promise of System Integration Standards Development Efforts". W Construction Research Congress 2003. Reston, VA: American Society of Civil Engineers, 2003. http://dx.doi.org/10.1061/40671(2003)96.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Latimer, IV, Dewitt T. "Construction Metrology Standards in Orbiting Facility Construction, Maintenance, and Operation". W Fourth International Conference and Exposition on Robotics for Challenging Situations and Environments. Reston, VA: American Society of Civil Engineers, 2000. http://dx.doi.org/10.1061/40476(299)2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Borhani, Alireza, Atieh Borhani, Carrie Sturts Dossick i Julie Jupp. "Smart Building Conceptualization: A Comparative Analysis of Literature and Standards". W Construction Research Congress 2022. Reston, VA: American Society of Civil Engineers, 2022. http://dx.doi.org/10.1061/9780784483954.032.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Zedan, Muhammad H., A. Omran i Hesham A. Hassan. "Test construction tool based on Interoperability standards". W 2014 International Conference on Engineering and Technology (ICET). IEEE, 2014. http://dx.doi.org/10.1109/icengtechnol.2014.7016815.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Anspach, James H. "New ASCE Utility Design and Construction Standards". W Pipelines 2013. Reston, VA: American Society of Civil Engineers, 2013. http://dx.doi.org/10.1061/9780784413012.119.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Luangcharoenrat, Chakkrit, i Singh Intrachooto. "Assessment of green building standards: Identifying aspects/opportunities for future improvements". W Creative Construction Conference 2018. Budapest University of Technology and Economics, 2018. http://dx.doi.org/10.3311/ccc2018-105.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Construction standards"

1

Lee, A. D., D. W. Schrock i S. A. Flintoft. The Federal manufactured home construction and safety standards -- implications for foam panel construction. Office of Scientific and Technical Information (OSTI), marzec 1997. http://dx.doi.org/10.2172/485954.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Deitz, Paul H., i Keith A. Appllin. Practices and Standards in the Construction of BRL-CAD Target Descriptions. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 1993. http://dx.doi.org/10.21236/ada274312.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Conner, Craig C., Heather E. Dillon, Robert G. Lucas i Michael Lubliner. Revision of the Energy-Efficiency Requirements in the Manufactured Home Construction and Safety Standards. Office of Scientific and Technical Information (OSTI), czerwiec 2004. http://dx.doi.org/10.2172/15020923.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Conner, C. C., A. D. Lee, R. G. Lucas i Z. T. Taylor. Revision of the energy conservation requirements in the manufactured home construction and safety standards. Office of Scientific and Technical Information (OSTI), luty 1992. http://dx.doi.org/10.2172/5718362.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Dikkers, Robert D., Riley M. Chung, Bijan Mohraz, H. S. Lew i Richard N. Wright. Proceedings of a workshop on developing and adopting seismic design and construction standards for lifelines. Gaithersburg, MD: National Institute of Standards and Technology, 1996. http://dx.doi.org/10.6028/nist.ir.5907.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Kasi, Muthiah, i Robert E. Chapman. Benefits of using ASTM building economics standards for the design, construction, and operation of constructed facilities. Gaithersburg, MD: National Institute of Standards and Technology, 2012. http://dx.doi.org/10.6028/nist.sp.1098.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Vine, E. Building Code Compliance and Enforcement: The Experience of SanFrancisco's Residential Energy Conservation Ordinanace and California'sBuildign Standards for New Construction. Office of Scientific and Technical Information (OSTI), listopad 1990. http://dx.doi.org/10.2172/908155.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Lee, A., i C. Conner. Technical support document: Survey data used in revising the energy conservation requirements in the manufactured home construction and safety standards. Office of Scientific and Technical Information (OSTI), luty 1992. http://dx.doi.org/10.2172/5885304.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Lee, A., i C. Conner. Technical support document: Survey data used in revising the energy conservation requirements in the manufactured home construction and safety standards. Office of Scientific and Technical Information (OSTI), luty 1992. http://dx.doi.org/10.2172/10120116.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Ross, Andrew, David Johnson, Hai Le, Danny Griffin, Carl Mudd i David Dawson. USACE Advanced Modeling Object Standard : Release 1.0. Engineer Research and Development Center (U.S.), wrzesień 2021. http://dx.doi.org/10.21079/11681/42152.

Pełny tekst źródła
Streszczenie:
The U.S. Army Corps of Engineers (USACE) Advanced Modeling Object Standard (AMOS) has been developed by the CAD/BIM Technology Center for Facilities, Infrastructure, and Environment to establish standards for support of the Advanced Modeling process within the Department of Defense (DoD) and the Federal Government. The critical component of Advanced Modeling is the objects themselves- and either make the modeling process more difficult or more successful. This manual is part of an initiative to develop a nonproprietary Advanced Modeling standard that incorporates both vertical construction and horizontal construction objects that will address the entire life cycle of facilities within the DoD. The material addressed in this USACE Advanced Modeling Object Standard includes a classification organization that is needed to identify models for specific use cases. Compliance with this standard will allow users to know whether the object model they are getting is graphically well developed but data poor or if it does have the data needed for creating contract documents. This capability will greatly reduce the designers’ efforts to either build an object or search/find/edit an object necessary for the development of their project. Considering that an advanced model may contain hundreds of objects this would represent a huge time savings and improve the modeling process.
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Construction standards” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii