Gotowa bibliografia na temat „Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))"
Subagia, I. D. G. Ary, i Yonjig Kim. "Tensile behavior of hybrid epoxy composite laminate containing carbon and basalt fibers". Science and Engineering of Composite Materials 21, nr 2 (1.03.2014): 211–17. http://dx.doi.org/10.1515/secm-2013-0003.
Pełny tekst źródłaKhan, Mohammad K. A., Harri Junaedi, Hassan Alshahrani, Ahmed Wagih, Gilles Lubineau i Tamer A. Sebaey. "Enhanced Open-Hole Strength and Toughness of Sandwich Carbon-Kevlar Woven Composite Laminates". Polymers 15, nr 10 (11.05.2023): 2276. http://dx.doi.org/10.3390/polym15102276.
Pełny tekst źródłaIsmail*, Mohd Fadzli, i Aidah Jumahat. "Impact Properties of Hybrid Fibre Reinforced Polymer Composite Laminates". International Journal of Innovative Technology and Exploring Engineering 9, nr 3 (30.01.2020): 2763–66. http://dx.doi.org/10.35940/ijitee.c9206.019320.
Pełny tekst źródłaSun, Jinru, Xuanjiannan Li, Xiangyu Tian, Jingliang Chen i Xueling Yao. "Dynamic electrical characteristics of carbon fiber-reinforced polymer composite under low intensity lightning current impulse". Advanced Composites Letters 29 (1.01.2020): 2633366X2094277. http://dx.doi.org/10.1177/2633366x20942775.
Pełny tekst źródłaLiu, J. A., Z. Q. Dong, X. Y. Zhu, W. B. Sun i Z. Q. Huang. "Flexural properties of lightweight carbon fiber/epoxy resin composite sandwiches with different fiber directions". Materials Research Express 9, nr 2 (1.02.2022): 026506. http://dx.doi.org/10.1088/2053-1591/ac4dc5.
Pełny tekst źródłaCASAPU, Maria, Michel ARRIGONI i Ion FUIOREA FUIOREA. "Off-axis response and shear characterization of unidirectional ply-level hybrid carbon-fiber-reinforced polymer materials". INCAS BULLETIN 15, nr 3 (4.09.2023): 31–46. http://dx.doi.org/10.13111/2066-8201.2023.15.3.3.
Pełny tekst źródłaHu, Junfeng, Xutong Zhang, Zhou Chen, Wenkang Guo, Hang Li i Xi Deng. "Experimental and Numerical Research on Open-Hole Strength and Damage Mechanism of Regularly Arrayed Short Fiber Reinforced Polymer Composite". Polymers 12, nr 7 (21.07.2020): 1622. http://dx.doi.org/10.3390/polym12071622.
Pełny tekst źródłaYousuf, Aquib Bin, Sajjid Hasan Asif, Md Jalal Uddin Rumi i Kamrul Hasan. "Progressive Failure Analysis of Carbon Fiber Reinforced Polymer Composite with a Circular Notch by Varying Fiber Orientation". IOP Conference Series: Materials Science and Engineering 1305, nr 1 (1.04.2024): 012019. http://dx.doi.org/10.1088/1757-899x/1305/1/012019.
Pełny tekst źródłaManomaisantiphap, Siwat, Vipin Kumar, Takao Okada i Tomohiro Yokozeki. "Electrically conductive carbon fiber layers as lightning strike protection for non-conductive epoxy-based CFRP substrate". Journal of Composite Materials 54, nr 29 (24.06.2020): 4547–55. http://dx.doi.org/10.1177/0021998320935946.
Pełny tekst źródłaZhong, Yu Cheng, i Sunil Chandrakant Joshi. "Diffusion Characteristics of Moisture in Polymer Composites under Different Hygrothermal Conditions". Advanced Materials Research 849 (listopad 2013): 69–74. http://dx.doi.org/10.4028/www.scientific.net/amr.849.69.
Pełny tekst źródłaRozprawy doktorskie na temat "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))"
Pandolfi, Carlo. "Experimental characterization of carbon-fiber-reinforced polymer laminates". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amslaurea.unibo.it/9777/.
Pełny tekst źródłaLee, Tuan Kuan 1976. "Shear strength of reinforced concrete T-beams strengthened using carbon fibre reinforced polymer (CFRP) laminates". Monash University, Dept. of Civil Engineering, 2003. http://arrow.monash.edu.au/hdl/1959.1/6647.
Pełny tekst źródłaAngelidis, Nikolaos. "Damage sensing in CFRP composites using electrical potential techniques". Thesis, Cranfield University, 2004. http://dspace.lib.cranfield.ac.uk/handle/1826/127.
Pełny tekst źródłaDeng, Jiangang. "Durability of carbon fiber reinforced polymer (CFRP) repair/strengthening concrete beams". Laramie, Wyo. : University of Wyoming, 2008. http://proquest.umi.com/pqdweb?did=1663060011&sid=2&Fmt=2&clientId=18949&RQT=309&VName=PQD.
Pełny tekst źródłaCurnutt, Austin. "Research on the mechanics of CFRP composite lap joints". Thesis, Kansas State University, 2017. http://hdl.handle.net/2097/38191.
Pełny tekst źródłaDepartment of Architectural Engineering
Donald J. Phillippi
For this thesis, research was performed on CFRP bonded composite lap-joints with one and two continuous laminas through the lap. Composite wraps used to retrofit existing structures use lap joints to maintain their integrity. The use of composites for retrofitting structures has many advantages over traditional methods, such as steel jacketing, and is becoming more widely accepted in the structural engineering industry. While much literature exists documenting the performance of composite wraps as a whole when applied to concrete columns, less information is available on the behavior of the lap-joint of the wrap. Developing a better understanding of how the lap-joint behaves will help researchers further understand composite column wraps. This research sought to determine what affect continuous middle laminas may have on the stiffness of lap joints and whether or not stress concentrations exist in the lap-joint due to a change in stiffness.
Kergosien, Nina. "Etude de l'intégration de transducteurs piézoélectriques à coeur de matériaux composite de type aéronautique pour le contrôle santé intégré par ondes de Lamb". Electronic Thesis or Diss., Ecully, Ecole centrale de Lyon, 2024. http://www.theses.fr/2024ECDL0008.
Pełny tekst źródłaSHM systems are currently being developed to check the integrity of aircraft composite materials. These systems will help optimize maintenance by enabling real-time monitoring of structural condition, or spot-checking of parts that are difficult to access using conventional NDT methods. Composite materials offer the possibility of integrating a SHM system directly into the material. In this way, the instrumentation is protected from the environment and surface bonding issues are resolved. The aim of this thesis is to determine the effects of integrating piezoelectric transducers into the core of an aeronautical laminated CFRP composite on their Lamb-wave emission and reception abilities, in order to demonstrate the advantages and disadvantages for the design of a defect detection SHM system. Thin PZT transducers proved to be the most suitable ones for integration, as they can withstand the processing conditions of an autoclave-processed composite (7 bar and 180°C). They are also capable of transmitting and receiving guided waves, which are propagating in the plates. Moreover, the integration method was adapted to preserve the integrity of the PZTs and to optimize their ability to transmit waves in a composite. In order to assess the effectiveness of the integration, electromechanical impedance measurements were made a fast checking process. Characterization of qA0 mode wavefield transmitted by embedded PZT was carried out experimentally. Surface-bonded and embedded PZT were excited at frequencies between 30 and 200 kHz, while out-of-plane displacements were measured with a laser vibrometer. The ability of the embedded PZT to detect a simulated magnet-type defect are also studied in pitch-catch tests, and compared with the behavior of surface-bonded PZT to the composite surface. A dynamic finite element modelling study was then conducted to highlight the physical phenomena induced by the integration of a PZT in the composite core. The direction of the plies in contact with the embedded PZT, the depth of integration and the coupling of the PZT with the composite are influencing the ultrasonic transduction mechanism. Furthermore, it appears that the stresses induced by the PZT actuator cannot be simplified by the pin-force model usually used to load a PZT on an isotropic material surface in flaw detection models. These stresses are not radially oriented and depend on the PZT electrode considered, as well as on the wave generation frequencies
Olka, Michael. "FLEXURAL MECHANICAL DURABILITY OF CONCRETE BEAMS STRENGTHENED BY EXTERNALLY BONDED CARBON FIBER REINFORCED POLYMER SHEETS". Master's thesis, University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/3120.
Pełny tekst źródłaM.S.
Department of Civil and Environmental Engineering
Engineering and Computer Science
Civil Engineering MS
Barberio, Francesco. "Nanofibre contenenti grafene per la modifica di compositi laminati: ottimizzazione del processo di elettrofilatura". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/20745/.
Pełny tekst źródłaDawood, Mina Magdy Riad. "Fundamental Behavior of Steel-Concrete Composite Beams Strengthened with High Modulus Carbon Fiber Reinforced Polymer (CFRP) Materials". NCSU, 2005. http://www.lib.ncsu.edu/theses/available/etd-06292005-192140/.
Pełny tekst źródłaHuang, Jia. "Rapid determination of fatigue behaviour for carbon fiber reinforced polymer laminates based on thermodynamic phenomena observed by IR thermography". Thesis, Toulouse 3, 2019. http://www.theses.fr/2019TOU30033.
Pełny tekst źródłaIn order to achieve weight reduction of composite structures and reduce manufacturing and operating costs, fatigue behavior of Carbon Fiber Reinforced Polymer (CFRP) laminates has received more and more attention. The objectives of this thesis are to develop methodologies to evaluate the fatigue behavior of CFRP laminates in a short time based on the analysis of thermodynamic data measured by an infrared camera and to investigate the inherent correlation between energy dissipation and fatigue damage. Three new numerical methods based on statistical analysis for the treatment of the thermal data are firstly proposed to avoid man-made uncertainties in the traditional graphic methods such as Luong's method and Risitano's method. Those proposed methods are all evaluated by the experimental data from literature to determine the fatigue limit with uniqueness. Then, a two-parameter model is proposed to characterize the stiffness degradation of CFRP laminates with the increase of cycle numbers. After the calibration of parameters and the calculation of the normalized failure threshold stiffness, the whole S-N curve can be obtained in a very short time. Thereafter, the relationship between fatigue damage and heat generation is studied. Depending on the different causes, the generated heat is classified into two parts - induced by internal friction and induced by damage accumulation. The total heat generation corresponding to damage appears to be independent of loading amplitude, and this conclusion can also be used to predict the S-N curve with good precision
Książki na temat "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))"
University, Monash, red. Bond characteristics between steel and carbon fibre reinforced polymer (CFRP) composites. 2007.
Znajdź pełny tekst źródłaCzęści książek na temat "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))"
Al-Rousan, Rajai Z., Khairedin M. Abdalla i Bara’a R. Alnemrawi. "The Behavior of Heat-Damaged RC Beams Reinforced Internally with CFRP Strips". W Lecture Notes in Civil Engineering, 165–74. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-57800-7_15.
Pełny tekst źródłaOzkan, Dervis, Mustafa Sabri Gok i Abdullah Cahit Karaoglanli. "Carbon Fiber Reinforced Polymer (CFRP) Composite Materials, Their Characteristic Properties, Industrial Application Areas and Their Machinability". W Advanced Structured Materials, 235–53. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-39062-4_20.
Pełny tekst źródłaLu, Guangchen, Yinhang Ma, Minyang Wu, Boshuo Yang, Liu Liu i Fujun Yang. "Mechanical Characterization of Laminated Carbon Fiber Reinforced Polymer". W Advances in Transdisciplinary Engineering. IOS Press, 2023. http://dx.doi.org/10.3233/atde230162.
Pełny tekst źródłaChen, Quanshi, Yanwei Xu, Wensheng Li, Chao Shen, Shiguang Chen i Hao Li. "Investigation of the Influence of Delamination Characteristics on the Mechanical Properties of CFRP". W Advances in Transdisciplinary Engineering. IOS Press, 2023. http://dx.doi.org/10.3233/atde230165.
Pełny tekst źródłaSahoo, Pradeep Kumar, i Bikash Kumar Pradhan. "FE-BASED FATIGUE ANALYSIS OF UNNOTCHED COMPOSITE LAMINATE USING STIFFNESS DEGRADATION APPROACH". W Futuristic Trends in Mechanical Engineering Volume 3 Book 6, 15–34. Iterative International Publisher, Selfypage Developers Pvt Ltd, 2024. http://dx.doi.org/10.58532/v3bgme6p1ch2.
Pełny tekst źródłaAcharya, Aniket, Anant Kumar Singh, Aayaam Agarwal i Vikas Rastogi. "Analysis of Delamination Damage and Eigenvalue Buckling of Lap Joint in CFRP Laminates Using Finite Element Method". W Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220814.
Pełny tekst źródłaAl-Abdwais, Ahmed H., Riadh S. Al-Mahaidi i Adil K. Al-Tamimi. "Bond Strength of NSM CFRP Textile and Concrete Using Modified Cement-Based Adhesive at High Temperature Site Exposure". W Advances in Transdisciplinary Engineering. IOS Press, 2023. http://dx.doi.org/10.3233/atde230760.
Pełny tekst źródłaGangu Naidu, Challa, Challa V. V. Ramana, Yarraguntla Srinivasa Rao, Kollabathula Vara Prasada Rao, Dadi Vasudha, Gandi Anusha i Koppisetty B. Rajeshbabu. "A Concise Review on Carbon Fiber-Reinforced Polymer (CFRP) and their Mechanical Significance Including Industrial Applications". W Carbon Nanotubes - Recent Advances, New Perspectives and Potential Applications [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.109339.
Pełny tekst źródłaOlofin, IfeOlorun, i Ronggui Liu. "The Effect of Temperature on the Mechanical Performance of Steel and Carbon Fiber Reinforced Polymer (CFRP) Tensegrity System". W Composite Materials [Working Title]. IntechOpen, 2019. http://dx.doi.org/10.5772/intechopen.90010.
Pełny tekst źródłaShakouri Mahmoudabadi, Nasim, i Charles V. Camp. "Rapid Analysis of CFRP-Reinforced Concrete Structures Using Artificial Neural Networks". W Advanced Optimization Applications in Engineering, 60–96. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-2161-4.ch004.
Pełny tekst źródłaStreszczenia konferencji na temat "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))"
BHAGANAGAR, SIDDHARTH, PIAS KUMAR BISWAS, MANGILAL AGARWAL i HAMID DALIR. "CELLULOSE NANOFIBERS (CNF) REINFORCED CARBON FIBER/EPOXY MATRIX COMPOSITE WITH HIGHER MECHANICAL PROPERTIES". W Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36405.
Pełny tekst źródłaLiping, Zhao, Pang Boon Inn i Zhong Zhaowei. "Thermal wavefront sensing for defect inspection of carbon fiber reinforced polymer (CFRP) composite laminate". W 2012 Quantitative InfraRed Thermography. QIRT Council, 2012. http://dx.doi.org/10.21611/qirt.2012.377.
Pełny tekst źródłaAkter, Rizwana, i Oliver J. Myers. "Fabrication of a 3D Bistable Composite". W ASME 2020 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/smasis2020-2365.
Pełny tekst źródłaLABIK, TIM ,., JONATHAN AWERBUCH i TEIN-MIN TAN. "FAILURE PREDICTION IN LARGE SCALE COMPOSITE LAMINATES CONTAINING BONDED REPAIRS". W Proceedings for the American Society for Composites-Thirty Eighth Technical Conference. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/asc38/36584.
Pełny tekst źródłaYousefpour, Kamran, Wenhua Lin, Yeqing Wang i Chanyeop Park. "Protection of Carbon Fiber Reinforced Polymer Matrix (CFRP) Composite Laminate Against Lightning Strike Using Nano-Fillers". W 2020 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE, 2020. http://dx.doi.org/10.1109/ceidp49254.2020.9437508.
Pełny tekst źródłaANDREOZZI, M. "Effect of carbon nanotube content on the mechanical behaviour of CFRP composite materials". W Italian Manufacturing Association Conference. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902714-41.
Pełny tekst źródłaJafarli, Ilgar, i Umesh-Haribhai Vavaliya. "Mechanical behavior of I-beams reinforced by unidirectional carbon fibre, unidirectional glass fiber and carbon fibre laminates". W 22nd International Scientific Conference Engineering for Rural Development. Latvia University of Life Sciences and Technologies, Faculty of Engineering, 2023. http://dx.doi.org/10.22616/erdev.2023.22.tf144.
Pełny tekst źródłaKotikalapudi, Sai Tharun, i Raman P. Singh. "Mechanical Strength Degradation of Carbon Fiber Polymer Matrix Composites Exposed to Constant Low-Density Direct Current". W ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-12259.
Pełny tekst źródłaMeon, Mohd Suhairil. "Finite Element Analysis of Low-Velocity Impact Carbon Fiber-Reinforced Polymer (CFRP) Composite Laminate Emphasizing on Meshing Technique". W International Conference on Nanoscience and Nanotechnology 2022. Switzerland: Trans Tech Publications Ltd, 2023. http://dx.doi.org/10.4028/p-9hbg70.
Pełny tekst źródłaParandoush, Pedram, Timothy Deines, Dong Lin, Hao Zhang i Chang Ye. "Mechanical Finishing of 3D Printed Continuous Carbon Fiber Reinforced Polymer Composites via CNC Machining". W ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2972.
Pełny tekst źródłaRaporty organizacyjne na temat "Composite laminate in Carbon Fiber Reinforced Polymer (CFRP))"
Wang, Hao, Milad Salemi, Jiaqi Chen, P. N. Balaguru, Jinhao Liang i Ning Xie. DTPH56-15H-CAP04L An Inorganic Composite Coating for Pipeline Rehabilitation and Corrosion Protection. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), grudzień 2018. http://dx.doi.org/10.55274/r0011991.
Pełny tekst źródła