Książki na temat „COEFFICIENTS FOR INTERACTION”

The monograph analyzes the possibility of managing the process of socio-advertising influence on socio-demographic groups. The developed methodological bases with the use of the multivariate paradigmatic status of sociological knowledge allowed us to form: principles of designing social advertising interaction, factors of efficiency (quality) of social advertising, a system of sociological quality assurance of social advertising. Insufficiently studied problems of efficiency and quality of social advertising are investigated. The coefficients of the importance of its efficiency factors (quality) are established. Stable interrelations of social advertising influence at the level of revealed correlation coefficients of behavioral reactions of various categories of target audience with their characteristics are proved. The results obtained are summarized in the developed model of behavior of the target audience on the basis of social advertising interaction, and the content modules of the mechanism of controllability of the specified process are proposed.

A graduate-level text, Semiconductor physics: Principles, theory and nanoscale covers the central topics of the field, together with advanced topics related to the nanoscale and to quantum confinement, and integrates the understanding of important attributes that go beyond the conventional solid-state and statistical expositions. Topics include the behavior of electrons, phonons and photons; the energy and entropic foundations; bandstructures and their calculation; the behavior at surfaces and interfaces, including those of heterostructures and their heterojunctions; deep and shallow point perturbations; scattering and transport, including mesoscale behavior, using the evolution and dynamics of classical and quantum ensembles from a probabilistic viewpoint; energy transformations; light-matter interactions; the role of causality; the connections between the quantum and the macroscale that lead to linear responses and Onsager relationships; fluctuations and their connections to dissipation, noise and other attributes; stress and strain effects in semiconductors; properties of high permittivity dielectrics; and remote interaction processes. The final chapter discusses the special consequences of the principles to the variety of properties (consequences of selection rules, for example) under quantum-confined conditions and in monolayer semiconductor systems. The text also bring together short appendices discussing transform theorems integral to this study, the nature of random processes, oscillator strength, A and B coefficients and other topics important for understanding semiconductor behavior. The text brings the study of semiconductor physics to the same level as that of the advanced texts of solid state by focusing exclusively on the equilibrium and off-equilibrium behaviors important in semiconductors.

Humans often set aside their own self-interest to help others and punish free riders, even when interacting with strangers. To explain the origin of these ‘broad-scope prosocial preferences’, we should consider the processes of cultural evolution that might have acted in early human populations. Two types of cultural selection can be distinguished: CS1, in which cultural differences between individuals cause differences in their reproductive success; and CS2, in which cultural differences between individuals cause differences in their ‘cultural fitness’. This chapter proposes, speculatively, that human social evolution involved a gradual decoupling of cultural fitness from reproductive success. A cultural version of Hamilton’s rule, in which the coefficient of genetic relatedness is replaced by a coefficient of cultural relatedness, provides a helpful organizing framework for thinking about the evolution of social behaviour by CS1, and leads to a ‘cultural relatedness hypothesis’ regarding the origins of human prosociality.

The Analytic Element Method provides a foundation to solve boundary value problems commonly encountered in engineering and science. The goals are: to introduce readers to the basic principles of the AEM, to provide a template for those interested in pursuing these methods, and to empower readers to extend the AEM paradigm to an even broader range of problems. A comprehensive paradigm: place an element within its landscape, formulate its interactions with other elements using linear series of influence functions, and then solve for its coefficients to match its boundary and interface conditions with nearly exact precision. Collectively, sets of elements interact to transform their environment, and these synergistic interactions are expanded upon for three common types of problems. The first problem studies a vector field that is directed from high to low values of a function, and applications include: groundwater flow, vadose zone seepage, incompressible fluid flow, thermal conduction and electrostatics. A second type of problem studies the interactions of elements with waves, with applications including water waves and acoustics. A third type of problem studies the interactions of elements with stresses and displacements, with applications in elasticity for structures and geomechanics. The Analytic Element Method paradigm comprehensively employs a background of existing methodology using complex functions, separation of variables and singular integral equations. This text puts forth new methods to solving important problems across engineering and science, and has a tremendous potential to broaden perspective and change the way problems are formulated.

Glomerular filtration, the first step leading to the formation of primitive urine, is a passive phenomenon. The composition of this primitive urine is the consequence of the ultrafiltration of plasma depending on renal blood flow, on hydrostatic pressure of glomerular capillary, and on glomerular coefficient of ultrafiltration. Glomerular filtration rate (GFR) can be precisely measured by the calculation of the clearance of freely filtrated exogenous substances that are neither metabolized nor reabsorbed nor secreted by tubules: its mean value is 125 mL/min/1.73 m² in men and 110 mL/min/1.73 m² in women, which represents 20% of renal blood flow. In clinical practice, estimates of GFR are obtained by the measurement of creatininaemia followed by the application of various equations (MDRD or CKD-EPI) and more recently by the measurement of plasmatic C-cystatin. Under physiological conditions, GFR is a stable parameter that is regulated by the intrinsic vascular and tubular autoregulation, by the balance between paracrine and endocrine agents acting as vasoconstrictors and vasodilators, and by the effects of renal sympathetic nerves. The mechanisms controlling GFR regulation are complex. This is due to the variety of vasoactive agents and their targets, and multiple interactions between them. Nevertheless, the relative stability of GFR during important variations of systemic haemodynamics and volaemia is due to three major operating mechanisms: autoregulation of the afferent arteriolar resistance, local synthesis and action of angiotensin II, and the sensitivity of renal resistance vessels to respond to NO release.

Accident reconstruction utilizes principles of physics and empirical data to analyze the physical, electronic, video, audio, and testimonial evidence from a crash, to determine how and why the crash occurred, how the crash could have been avoided, or to determine whose description of the crash is most accurate. This process draws together aspects of mathematics, physics, engineering, materials science, human factors, and psychology, and combines analytical models with empirical test data. Different types of crashes produce different types of evidence and call for different analysis methods. Still, the basic philosophical approach of the reconstructionist is the same from crash type to crash type, as are the physical principles that are brought to bear on the analysis. This book covers a basic approach to accident reconstruction, including the underlying physical principles that are used, then details how this approach and the principles are applied when reconstructing motorcycle crashes. This second edition of Motorcycle Accident Reconstruction presents a thorough, systematic, and scientific overview of the available methods for reconstructing motorcycle crashes. This new edition contains: Additional theoretical models, examples, case studies, and test data. An updated bibliography incorporating the newest studies in the field. Expanded coverage of the braking capabilities of motorcyclists. Updated, refined, and expanded discussion of the decelerations of motorcycles sliding on the ground. A thoroughly rewritten and expanded discussion of motorcycle impacts with passenger vehicles. Updated coefficients of restitution for collisions between motorcycles and cars. A new and expanded discussion of using passenger car EDR data in motorcycle accident reconstruction. A new section covering recently published research on post-collision frozen speedometer readings on motorcycles. A new section on motorcycle interactions with potholes, roadway deterioration, and debris and expanded coverage of motorcycle falls. This second edition of Motorcycle Accident Reconstruction is a must-have title for accident reconstructionists, forensic engineers, and all interested in understanding why and how motorcycle crashes occur.

The aim of the paper was to determine the influence of root systems of chosen tree species found in the Polish Flysch Carpathians on the increase of soil shear strength (root cohesion) in terms of slope stability. The paper's goal was achieved through comprehensive tests on root systems of eight relatively common in the Polish Flysch Carpathians tree species. The tests that were carried out included field work, laboratory work and analytical calculations. As part of the field work, the root area ratio (A IA) of the roots was determined using the method of profiling the walls of the trench at a distance of about 1.0 m from the tree trunk. The width of the. trenches was about 1.0 m, and their depth depended on the ground conditions and ranged from 0.6 to 1.0 m below the ground level. After preparing the walls of the trench, the profile was divided into vertical layers with a height of 0.1 m, within which root diameters were measured. Roots with diameters from 1 to 10 mm were taken into consideration in root area ratio calculations in accordance with the generally accepted methodology for this type of tests. These measurements were made in Biegnik (silver fir), Ropica Polska (silver birch, black locust) and Szymbark (silver birch, European beech, European hornbeam, silver fir, sycamore maple, Scots pine, European spruce) located near Gorlice (The Low Beskids) in areas with unplanned forest management. In case of each tested tree species the samples of roots were taken, transported to the laboratory and then saturated with water for at least one day. Before testing the samples were obtained from the water and stretched in a. tensile testing machine in order to determine their tensile strength and flexibility. In general, over 2200 root samples were tested. The results of tests on root area ratio of root systems and their tensile strength were used to determine the value of increase in shear strength of the soils, called root cohesion. To this purpose a classic Wu-Waldron calculation model was used as well as two types of bundle models, the so called static model (Fiber Bundle Model — FIRM, FBM2, FBM3) and the deformation model (Root Bundle Model— RBM1, RBM2, mRBM1) that differ in terms of the assumptions concerning the way the tensile force is distributed to the roots as well as the range of parameters taken into account during calculations. The stability analysis of 8 landslides in forest areas of Cicikowicleie and Wignickie Foothills was a form of verification of relevance of the obtained calculation results. The results of tests on root area ratio in the profile showed that, as expected, the number of roots in the soil profile and their ApIA values are very variable. It was shown that the values of the root area ratio of the tested tree species with a diameter 1-10 ram are a maximum of 0.8% close to the surface of the ground and they decrease along with the depth reaching the values at least one order of magnitude lower than close to the surface at the depth 0.5-1.0 m below the ground level. Average values of the root area ratio within the soil profile were from 0.05 to 0.13% adequately for Scots pine and European beech. The measured values of the root area ratio are relatively low in relation to the values of this parameter given in literature, which is probably connected with great cohesiveness of the soils and the fact that there were a lot of rock fragments in the soil, where the tests were carried out. Calculation results of the Gale-Grigal function indicate that a distribution of roots in the soil profile is similar for the tested species, apart from the silver fir from Bie§nik and European hornbeam. Considering the number of roots, their distribution in the soil profile and the root area ratio it appears that — considering slope stability — the root systems of European beech and black locust are the most optimal, which coincides with tests results given in literature. The results of tensile strength tests showed that the roots of the tested tree species have different tensile strength. The roots of European beech and European hornbeam had high tensile strength, whereas the roots of conifers and silver birch in deciduous trees — low. The analysis of test results also showed that the roots of the studied tree species are characterized by high variability of mechanical properties. The values Of shear strength increase are mainly related to the number and size (diameter) of the roots in the soil profile as well as their tensile strength and pullout resistance, although they can also result from the used calculation method (calculation model). The tests showed that the distribution of roots in the soil and their tensile strength are characterized by large variability, which allows the conclusion that using typical geotechnical calculations, which take into consideration the role of root systems is exposed to a high risk of overestimating their influence on the soil reinforcement. hence, while determining or assuming the increase in shear strength of soil reinforced with roots (root cohesion) for design calculations, a conservative (careful) approach that includes the most unfavourable values of this parameter should be used. Tests showed that the values of shear strength increase of the soil reinforced with roots calculated using Wu-Waldron model in extreme cases are three times higher than the values calculated using bundle models. In general, the most conservative calculation results of the shear strength increase were obtained using deformation bundle models: RBM2 (RBMw) or mRBM1. RBM2 model considers the variability of strength characteristics of soils described by Weibull survival function and in most cases gives the lowest values of the shear strength increase, which usually constitute 50% of the values of shear strength increase determined using classic Wu-Waldron model. Whereas the second model (mRBM1.) considers averaged values of roots strength parameters as well as the possibility that two main mechanism of destruction of a root bundle - rupture and pulling out - can occur at the same. time. The values of shear strength increase calculated using this model were the lowest in case of beech and hornbeam roots, which had high tensile strength. It indicates that in the surface part of the profile (down to 0.2 m below the ground level), primarily in case of deciduous trees, the main mechanism of failure of the root bundle will be pulling out. However, this model requires the knowledge of a much greater number of geometrical parameters of roots and geotechnical parameters of soil, and additionally it is very sensitive to input data. Therefore, it seems practical to use the RBM2 model to assess the influence of roots on the soil shear strength increase, and in order to obtain safe results of calculations in the surface part of the profile, the Weibull shape coefficient equal to 1.0 can be assumed. On the other hand, the Wu-Waldron model can be used for the initial assessment of the shear strength increase of soil reinforced with roots in the situation, where the deformation properties of the root system and its interaction with the soil are not considered, although the values of the shear strength increase calculated using this model should be corrected and reduced by half. Test results indicate that in terms of slope stability the root systems of beech and hornbeam have the most favourable properties - their maximum effect of soil reinforcement in the profile to the depth of 0.5 m does not usually exceed 30 kPa, and to the depth of 1 m - 20 kPa. The root systems of conifers have the least impact on the slope reinforcement, usually increasing the soil shear strength by less than 5 kPa. These values coincide to a large extent with the range of shear strength increase obtained from the direct shear test as well as results of stability analysis given in literature and carried out as part of this work. The analysis of the literature indicates that the methods of measuring tree's root systems as well as their interpretation are very different, which often limits the possibilities of comparing test results. This indicates the need to systematize this type of tests and for this purpose a root distribution model (RDM) can be used, which can be integrated with any deformation bundle model (RBM). A combination of these two calculation models allows the range of soil reinforcement around trees to be determined and this information might be used in practice, while planning bioengineering procedures in areas exposed to surface mass movements. The functionality of this solution can be increased by considering the dynamics of plant develop¬ment in the calculations. This, however, requires conducting this type of research in order to obtain more data.