Artykuły w czasopismach na temat „Circular innovation ecosystem”

The circular economy may help firms to maximize the value of their material resources and minimize the overall resource use, waste, pollution and emissions of their business activities. Implementing a circular economy program requires radical changes in product, business model and ecosystem innovation. Most research on circular oriented innovation takes a product or business model perspective. Few publications have explored how to innovate in ecosystems: how a group of loosely coupled organizations can change how they interact with each other to achieve a collective outcome. This study proposes the Circularity Deck: a card deck-based tool that can help firms to analyze, ideate and develop the circularity potential of their innovation ecosystems. The tool is based on a literature review of circular oriented innovation principles, and of practical examples that show how these principles have been applied. The principles are organized according to the intended circular strategy outcome that they pursue (i.e., narrow, slow, close, regenerate and inform material and energy flows), and the extent of the innovation perspective that is needed to operationalize a principle (i.e., product, business model, or ecosystem innovation). This review and categorization process first produced a novel analysis of the circular economy innovation landscape, using an ecosystem perspective. Second, these results served to develop the Circularity Deck, which was further developed and tested for ease of use and perceived usefulness in 12 workshops with 136 participants from 62 different organizations. The Circularity Deck provides an approach for future research and practice to integrate new principles and examples that can help firms to analyze, ideate and develop circular innovation ecosystems.

The paper aims to investigate how open innovations (OI) paradigm, based on the principle of the collaboration between the innovation ecosystem stakeholders can contribute to the adoption and promotion of the circular economy (CE). The engagement in the knowledge, technology and resource sharing between the Quadruple Helix (QH) stakeholders – enterprises, academia, society, government - is crucial for the transition to the CE model. The paper introduces the concept of the open circular innovation ecosystem (OCIE), its key stakeholders as well as discusses the drivers and barriers leading to the successful OCIE.

The aim of this paper is to address the gap in the academic literature towards the development of methodological approaches to the industrial ecosystem potential assessment. This study is focused on the industrial ecosystems formed on the basis of a symbiotic model and implementing the principles of circularity. The article systematizes the problem of using circular and ecosystem approaches in industrial development. A contribution to the literature was achieved by providing a systemic perspective on the sustainable industrial process. In this paper, we develop the methodological foundations to improve the understanding of circular and integration processes’ influence on the industrial ecosystem potential. For a relevant analysis of industrial ecosystem potential, the existing patterns of system functioning were taken into account, including entropy equilibrium and Harrington model. We illustrate our assumptions with an empirical case study of two different industrial ecosystems, Kalundborg Symbiosis and Baltic Industrial Symbiosis, with an assessment of their circular and integration potentials. The results highlight that the potential of Kalundborg Symbiosis in the field of circularity is realized quite productively, but not in full. The holistic knowledge of circularity process provides new information that supports academics, policymakers, government, and individuals with a more appropriate understanding of the conditions that help to eliminate the environmental problems faced in society, helping to achieve the country’s sustainable development goals.

It is evident that for an organisation, the most successful way for operating is being part of business ecosystems and creating more value than on its own. Universities play a specific role in this field. We undertook this research to verify the universities’ role in an innovation ecosystem where they work together with businesses to create and share new cutting-edge knowledge. Our theory-based research offers scientifically underpinned suggestions for innovators and entrepreneurs in developing innovation ecosystems with a specific focus on the altered role of universities. The article focuses on the roles of universities to discovers how it can become more resilient to adapt to the ever-changing demands of an innovation ecosystem. How can it provide professional knowledge sharing on an equal base within the ecosystem whilst remaining its leading role in innovation and knowledge development? This approach breaks with the traditional view of universities as the primary source of knowledge in society. Universities take several roles in a business ecosystem, which we conclude in this paper. To let universities stay strong in innovation, they must adapt their traditional role to suit to the ever-changing demands presented by the ecosystem. They need to focus on knowledge sharing instead of knowledge delivery to achieve a sustainable growth. The changing approach fits better the innovation and entrepreneurship by working within a knowledge ecosystem. Additionally, organisations must stay proactive by evaluating partners better, building meaningful relationships, and adopting a business-like mentality. Organising such a knowledge ecosystem will stimulate innovation and facilitate entrepreneurs in searching for new markets in an increasingly sustainable and circular world.

AbstractTo advance the circular economy, there is a need to take an ecosystem view of business models for circularity in which different actors interact dynamically to create economic, environmental and social value. This research introduces the Circular Business Ecosystem Model Canvas, a novel method to prototype a circular ecosystem of business models. The case of ferric chloride, an inorganic coagulant for wastewater treatment, is used to demonstrate the new canvas and show how it supports the development of a more holistic perspective on sustainability-oriented business model innovation.

The aim of the paper is to identify the direction of evolution, the conditions of organisation and the impact of the new concept of digital innovation ecosystem in boostering circularity development. The traditional model of innovation brokerage and the new circularity broker paradigm in the development of the circular economy is presented. The authors discuss the circularity broker as an IT interface, equipped with wide range of IT tools, and above all, self-learning applications with AI elements. The circularity broker is accompanied by its watch dog, i.e., a set of IT tools used to search, process and transfer information dedicated to specific stakeholders, exactly when they need this information. The concept of circular brokerage is anchored in the area of the regional clusters dedicated to circular economy development.

The circular business model (CBM) concepts are vast, interconnected, and emerging. Research to date has been somewhat fragmented, and there would be value in focusing on the systemic identification of the connectivity of the topics around CBM. Furthermore, the business model innovation (BMI) process and business model implementation were identified as two separate spectra of research that should be seen collectively and added to the literature. This article reviewed 256 articles (solely focusing on “CBM frameworks”) published between 2007 and mid-2022, collected from the Scopus database, and analyzed using the content analysis method to identify the research gap/s. Results showed that under circular business model innovation (CBMI), the innovation process and their associated process modeling, archetypes, tools, experimentation, digitalization, and innovation via the inclusion of circular economy (CE) principles and sustainability in BMI were highlighted. From the CBM adoption/implementation perspectives, business ecosystem, technological innovation, product lifecycle management, CBM value dimensions (e.g., value proposition, value creation, and delivery), organizational capabilities, and dynamics were investigated. Topics around sustainability and circularity principles, strategies and organizational performance, CBM value streams, digitalization, and product-service systems were topical issues of the circular supply chain (CSC). A conceptual framework for gaining circular competencies integrating all elemental issues throughout the CBM development process (e.g., innovation, adoption within CSC) has been progressed. Based on the review, this article defined a circular business model as a business model that fundamentally applies one or more of the principles of CE at various product/service/material lifecycle stages, for which sustainability-focused technological innovation, collaboration among business ecosystem partners, and enhanced dynamic capabilities of any organization are prerequisites. Several research gaps were identified with potential avenues for future research directions, which will be helpful for policymakers, business organizations, and researchers.

<p>Theoretical background: The article concerns the concept of electromobility ecosystem development, understood as a multidimensional, multisectoral network with the features of systemic innovation. In scientific discussion and policy strategies, the transformation towards an integrated electromobility network is one of the most important paths leading to emission neutrality while maintaining the principles of closed loop. The article presents the impact of the circular economy assumptions on shaping the electromobility ecosystem.</p><p>Purpose of the article: Identification of activities determining the development of the electromobility ecosystem in accordance with the principles of circular economy and a declarative assessment of their effectiveness.</p><p>Research methods: The desk research method and qualitative and quantitative analysis methods were used to present and discuss the results of own research.</p><p>Main findings: The concept of sustainable development of the electromobility ecosystem is a comprehensive look at the process of transforming mobility, in line with the idea of circular economy. Due to the complexity of activities, it can be concluded that its implementation will be a gradual and long-term process that requires a systemic approach. ReSOLVE’s activities are the result of using breakthrough technological innovations, business models and a new mobility culture in the process of shaping the electromobility ecosystem. Their identification and assessment, based on the results of the survey, adds value to the literature on the subject in the context of the development of a competitive, sustainable and circular economy, for which an emission-neutral and innovative mobility network is necessary.</p>

Since the advent of a circular economy, typical strategies for change have focused on circularising existing business models or developing new closed-loop ones, where design is understood as a service provider, adapting its processes accordingly. This understanding and application of design is problematical, constraining and misdirecting any potential for effective innovation in the future. Interior design methodology needs to be completely rethought to create a sustainable circular design ecosystem. The learning and teaching of the interior design process has its foundation in an unsustainable, traditional economy that operates in a closed linear sequence of design, specification and fit-out. An undergraduate retail interior design project highlighted the need to evaluate designing for a circular economy as an ecosystem, based on the 10 R’s leading to four building blocks for the learning and teaching of circular retail interior design. Through analysis of the nature and existing use of design within a circular economy, it is possible to conceptualise the deconstruction of the existing linear process of interior design pedagogy and rebuild that process as a sustainable circular retail interior design methodology. This paper identifies four key sustainable design principles as a foundation for a new education paradigm for a circular interior design ecosystem model.

Circular economy (CE) has attracted so much attention around the world as it can contribute to the balance between economic development and environmental sustainability, to address the increasing critical resources scarcity and environmental issues. Small and medium-sized enterprises (SMEs) in China are a major driving force in the economy with 43 million SMEs in 2020. Most of them maintain the traditional economic development method of “take–use”, without considering the environment. This has caused great harm to the environment and resource availability. Therefore, Chinese SMEs must adopt CE in their business to address this issue. The current study aims to explore the key barriers (lack of time, lack of human resources and finance) and enablers (e.g., network, innovation, and reputation) for Chinese SMEs CE adoption. The current study employs a systematic review approach with thematic analysis to identify the internal and external barriers and enablers of CE adoption among SMEs. Moreover, a CE ecosystem has been proposed for identifying the key actors in the CE system, which will be beneficial for policy-makers to take into account when drafting and adjusting CE laws and regulations.

PurposeThe paper aims to contribute to the Circular Economy debate from the Entrepreneurship Education perspective. Despite scholars' growing interest in both these research streams, scarce consideration is given to the comprehension of their mutual implications and meaning.Design/methodology/approachThe paper is based on a cross-case analysis. It compares 16 higher education programmes launched by Universities in Europe aimed to create competences and skills for Circular Economy in students with different profiles. The analysis provides a critical view of the emerging trends for the entrepreneurship education skills and competencies needed for the emerging circular entrepreneurship paradigm.FindingsThe paper discusses the main trends of Entrepreneurship Education focused on Circular Economy debate at the European level: rationale and learning objectives (why); contents (what), target students and stakeholders (who) and the learning processes (how). Four thematic areas are identified as common patterns: circular economy business model, green supply chain management, technology entrepreneurship and innovation and public policies and institutional frameworks.Research limitations/implicationsThe paper sheds new light on a still under-researched area, suggesting several implications and avenues for future research in Circular Economy and Entrepreneurship Education. Limitations regard the need to analyse education programmes from a larger geographical area, to take into consideration interesting experiences in the rest of the world and to also collect quantitative data.Practical implicationsPractical implications arise for the development of learning initiatives for the Circular Economy: learning objectives and new thematic areas focused on circular, sustainable and innovative rethinking of the process for creating value in the incumbent companies; exploring meaning and benefits of collaborative approaches and participation in the circular economy innovation ecosystem and developing advanced models for soft-skills development in terms of leadership, motivational and creative skills.Originality/valueThe debate on CE can also be rooted in the paradigm of entrepreneurship as a core process to advance knowledge on valuable and sustainable innovation.

A new brewery is founded in Brazil every two days. Yet with climate change, drinking water is increasingly scarce. Previous studies have begun exploring the brewing industry, but an examination of circular economy initiatives in Latin America is lacking, particularly during the COVID era. This study analyzes strategic implications of circular economy initiatives, together with their role in the coevolution of the craft beer sociotechnical system in Brazil from a resource perspective during the COVID pandemic. Using a qualitative methodology based on analytic induction, 11 in-depth semi-structured interviews were carried out with key actors from the craft beer sociotechnical system in Guarapuava. For the content analysis, we triangulated the interviews with an analysis of 74 related documents. We found evidence of circular economy practices and sociotechnical transitions with the simultaneous coevolution of the system actors. Increasing rejection of the linear take–make–waste economy was observed as subject organizations largely adopted a regenerative model reducing operational waste. Hence, entrepreneurial innovation was apparently crucial for resource allocation during the COVID era. This work contributes to further understanding resource configurations in the circular economy, with practical implications for integrating sustainability into strategy, business models, and production.

Purpose Accessing and sharing dispersed knowledge in ecosystems is neither easy nor automatic. In ecosystems, focal firms should purposely create the right conditions and act to deal with dispersed knowledge. This study aims to investigate how focal firms manage dispersed knowledge in ecosystems characterized by a set of autonomous, heterogeneous, yet interdependent actors involved in experimentation under uncertainty. Design/methodology/approach Following a conceptual framework based on preceding literature, this study conducted a broad qualitative case study of 6 firms and 12 projects, with 43 semi-structured interviews to identify the patterns of actions associated with dispersed knowledge management (KM) in ecosystems. This paper combines coding and multiple case comparisons to examine the processes and strategies used by the firms to strategically manage dispersed knowledge in ecosystems. Findings This paper proposes a framework that articulates a new type of orchestration (dispersed knowledge orchestration) and offers a new set of dispersed knowledge strategies (transfer, modularity and circular) for ecosystems. Practical implications Innovation and knowledge managers play the roles of dispersed knowledge orchestrators. The study offers guidance on how focal firms should carefully use a particular set of approaches (e.g. integrative theorization) including a portfolio of dispersed knowledge strategies in ecosystems. Originality/value Current literature on KM and ecosystem management offers a limited understanding of how organizations manage dispersed knowledge in ecosystems. The research provides three major original contributions. First, the framework contributes to broadening the current understanding of ecosystem orchestration by identifying the micro-foundations of dispersed knowledge orchestration: integrative theorization, nurturing distributed sensemaking and a new chapter for ecosystem governance (i.e. dispersed knowledge governance). Moreover, the framework proposes a new type of strategy, the dispersed knowledge strategy. Finally, by exploring the interplay between the micro-foundations of dispersed knowledge orchestration and dispersed knowledge strategy, the results contribute to a multi-level approach in the field.

The traditional concept of the primary, secondary, tertiary and later quaternary economy is based on several structurally divided and related tasks and processes in processing raw materials and earth resources. Gradually, a new concept of the functioning of the economy was created, called “circular economy” or “circular economy”. Its basis is the transformation of linear economic processes managing the use of raw materials to create a sustainable economic growth model. The circular economy transforms economic activity associated with the consumption of limited resources into the more efficient reuse of resources. Based on the above, the presented article aims, based on theoretical and empirical analysis, to identify the potential of processing and using non-energy raw material—recycled aggregate—in the construction industry and to propose a concept for information modeling of the parameters of sustainable construction using this non-energy raw material per the principles of the circular economy. The solution to this research problem is realized through theoretical analysis and comparison of approaches to the circular economy, reuse of non-energy raw materials in the construction industry and analysis for the creation of a concept based on the use of information needed for sustainable construction planning through building information modeling (BIM). Based on my research, my results will be presented, the applicability of which is verified through a case study. The object of the case study is the construction of a new building, which will represent a set of five similar constructions interconnected by underground floors (garages, technical facilities of buildings) and communication spaces (corridor, hall). The priority of the construction of the centre is to build a sustainable building, i.e., to implement the work using sustainable methods with the greatest possible use of sustainable materials and procedures, which will reduce the impact on the ecosystem and support the goals of the circular economy. Traditional, natural raw materials will be replaced by recycled secondary raw materials within individual constructions and elements. When choosing suitable raw materials, the design of the BIM library of sustainable elements will help. The BIM library will act as a link between manufacturers and BIM digital replicas of real building products and components.

Enabling Technologies have the potential to transform both the physical flow of materials and resources (production and construction methods), and the intangible organisational and managerial relationships (exchange and monitoring of data and relationships along the entire chain of value). They should, therefore, be considered important in supporting change processes aimed at the circular use of resources. This paper presents some research and experiments, at European and Italian level, aimed at developing and applying Enabling Technologies for circular economy, and at aligning them with the needs and challenges of society, by directly involving actors of the building sector ecosystem in moments of discussion and co-creation to define potential strategies and operational actions for innovation in the sector.

Green and blue infrastructure, nature-based solutions, and cultural and built heritage play a key role in enhancing ecosystem services provision and shaping urban quality and communities’ wellbeing calling for an integrated approach to ecosystem services in urban policy and planning and decision-making. On the other side, under-used spaces and buildings have social, cultural, economic, as well as ecological functions and benefits, which are essential to sustainable urban development. The EU has been developing and implementing policies for an integrated approach to urban development and sustainable land use through the implementation of the Urban Agenda for the EU and fourteen associated Partnerships. Thus, it engaged a broad range of institutions and stakeholders across Europe in promoting local projects and sharing best practices on sustainable land use and nature-based solutions, the circular economy, and cultural heritage. This paper reviews the experiences of cities involved in the Partnerships of the Urban Agenda for the EU by illustrating how they related to different modes of ecosystem governance and associated challenges, discussing how three case studies integrate different dimensions of ecosystem services and regeneration in under-used areas and what type of knowledge as well as regulation and governance modes they have developed for supporting innovation in land use planning and management for urban ecosystem services. The results show that appropriate alternative regulations and policies are little explored and that cities adopt an integrated approach, combining cultural, environmental, economic, and social dimensions in their interventions, directly or indirectly enhancing the benefits of built and natural heritage and urban ecosystems in under-used areas. However, some issues, such as nature-based solutions and climate change, are still partially integrated into the projects while priority is given to the cultural, aesthetic, and economic dimensions.

According to recent literature in the field of sustainability, the circular economy (CE) appears to be a thriving opportunity for creating new businesses, although less attention has been paid to the form in which its principles fit into a comprehensive framework that enables companies to design it in a practical way. This paper presents the methodology that has been adopted to pave the way to a coherent reference framework for circular business model innovation and its outstanding design and implementation, taking into consideration the entire value and supply chain. A unique analysis of recent innovations in circular economy models is provided herein, together with an exhaustive analysis of those elements that enable or hinder their implementation. The main interactions among all those critical elements influencing how organisations innovate and operate cooperatively within a CE ecosystem are also evaluated. In addition, a study of five industrial cases in the pulp and paper industry allowed searching for industrial insights and empirical evidence of the relevance of those elements, including observation, document analysis, and interviews. Lastly, the main outcomes of this research are illustrated using the CE reference framework designed when applied to the aforementioned industrial cases, and relevant insights into future improvements are also provided.

Innovation in the circular economy (CE) and the deployment of effective circular business models (CBM) have attracted significant attention in times of growing natural resource scarcity. Despite this widespread interest, significant challenges remain between theoretical innovations and effective CBM implementation in any industrial sector where companies pursue cost-saving opportunities through waste valorisation strategies. Since current methods mislead in terms of the real limitations to designing feasible novel products and services under a circular economy, this study proposes exploring determinants underpinning the organisational resilience of CBMs under a resource efficiency strategy through three case studies. As a result of a co-creation process, the implementation of a CBM framework was built upon empirical data and, thence, a phase-based implementation guide was laid out to assist companies in designing and implementing innovative CBM dealing with the complexity of innovative waste valorisation strategies between the PPI and construction sectors. Relevant findings on managerial and policy recommendations encountered along the demo stage are provided in this paper favouring an effective implementation of CE strategies: the role of technological and non-technological aspects within the CBM, the perspective of the ecosystem and its value proposition, and specific guidelines for the different phases of CBM life cycle.

The article provides a comprehensive analysis of the existing forms of clustering of production processes in the process of the formation of industrial ecosystems on an international scale, highlighting the role of global supply chains in the value chain in the context of the transformation of economic development models as a factor of reindustrialization, taking into account the latest imperatives of innovation, greening and constancy. It has been established that the ways of creating value do not just depend on the features of the technological process, but, more importantly, they are induced by the structure of the ecosystem in which they are built on the principles of interdependence. The geographic boundaries of an industrial ecosystem are defined by the interdependencies that link organizations within the ecosystem, and by the new bonds that are being strengthened outside of it. The article highlights the need to identify structural gaps in the ecosystem early in order to maximize the benefits of potential collaboration and encourage innovation. It is critically important for governments to define the real boundaries of industrial ecosystems in order to promote their transformation into closed loops of innovation. The definition of an industrial ecosystem is proposed as a multi-level production system, including heterogeneous agents involved in industry value chains and contributing to the realization of the potential of the ecosystem (and its participants) and the development of the country's productive capacity. The place of the supply chain in the value chain has been established, which made it possible to assert that the supply chain is increasingly associated with business functions and processes that go beyond logistics within and between companies. The concepts of clusters and industrial areas are analyzed, which made it possible to single out the role of industrial parks in the development of an industrial cluster. It has been proven that the development of industrial parks contributes to the creation of clusters of competitive industries and the expansion of production chains, which contributes to the balanced economic development of the regions through the mobilization of all available resources. Factors are identified, the combination of which allows the transformation of an industrial zone or a park into an eco-industrial park. The definition of an eco-industrial park is proposed and its alternative names are given, such as: permanent economic zone; low-carbon technological zone; green investment cluster; circular industrial park. The potential of eco-industrial parks in the implementation of the 2030 Sustainable Development Goals has been established. This led to the conclusion that regional systems are evolving from places where firms are located that do not know about each other and simply benefit from economies of scale, to systems that include dynamic training and coordination to enhance regional competitive advantage.

Objective: This study aims at investigating the relationship between internal control systems (ICS) and accounting data analytics (ADA). This study also examines the ways in which ICS and ADA influence green innovation ecosystem (GIE). Furthermore, it endeavors to explore the digital circular business model innovation (DCBMI) mediation mechanism in the connection between ICS, ADA, and GIE. Theoretical Framework: Drawing on the practice-based view theory, this study focuses on several constructs and their interconnections namely ICS, ADA, GIE, and DCBMI. Method: The hypothetico-deductive approach was utilized in this study. The study utilized structural equation modeling to examine the proposed model, which was based on statistical data obtained from a cross-sectional survey of 523 accountants employed in public sector organizations (PSOs). Results and Discussion: The result substantiated the markedly positive interconnection between ICS and ADA. Also, GIE was verified to be affected by ICS and ADA. Simultaneously, these interconnections were partially mediated by DCBMI. Research Implications: These observations served as a guide for the leaders of PSOs to identify and capitalize on opportunities to become effective in the digital transformation journey, as well as to develop robust strategies to effectively direct their green innovation process. Originality/Value: It also enlarges the body literature on GIE through producing empirical evidences concerning the influences of ICS and ADA on GIE within PSOs in developing country. Strikingly, the originality of this investigation lied in studying the mediating effect of DCBMI on the interlinks between ICS and GIE as well as ADA and GIE.

Objective: This study aims at investigating the relationship between internal control systems (ICS) and accounting data analytics (ADA). This study also examines the ways in which ICS and ADA influence green innovation ecosystem (GIE). Furthermore, it endeavors to explore the digital circular business model innovation (DCBMI) mediation mechanism in the connection between ICS, ADA, and GIE. Theoretical Framework: Drawing on the practice-based view theory, this study focuses on several constructs and their interconnections namely ICS, ADA, GIE, and DCBMI. Method: The hypothetico-deductive approach was utilized in this study. The study utilized structural equation modeling to examine the proposed model, which was based on statistical data obtained from a cross-sectional survey of 523 accountants employed in public sector organizations (PSOs). Results and Discussion: The result substantiated the markedly positive interconnection between ICS and ADA. Also, GIE was verified to be affected by ICS and ADA. Simultaneously, these interconnections were partially mediated by DCBMI. Research Implications: These observations served as a guide for the leaders of PSOs to identify and capitalize on opportunities to become effective in the digital transformation journey, as well as to develop robust strategies to effectively direct their green innovation process. Originality/Value: It also enlarges the body literature on GIE through producing empirical evidences concerning the influences of ICS and ADA on GIE within PSOs in developing country. Strikingly, the originality of this investigation lied in studying the mediating effect of DCBMI on the interlinks between ICS and GIE as well as ADA and GIE.

Goal: this paper goal is presenting sustainability experiences using Life Cycle Assessment perspective in two Latin America higher education institutions (HEI). What similarities do these HEI have in common regarding sustainability? What are the major challenges they face? In which way is Circular Economy effective on university campuses? Since universities face challenges posed by a changing and competitive environment, there ought to be sustainable management that is more appropriate to higher education institutions’ real environment, which is characterized by complexity, paradoxes, ambiguities, and conflicts. Methodology/Approach: Multiple Case Study. A resilience threshold of global ecosystem should be considered. Ecosystem dynamics require effort in mapping its functions. Results: the results considered that the difference between environmental approach failure and success lies in knowing how to realign their strategic plans. Limitations of the investigation: comparing private and public HEI and different levels of education (technical, undergraduate and graduate courses). Practical implication: the practical implication leads to an understanding that Circular Economy in HEI can be perceived as a guideline to innovation towards a more sustainable economy. Originality/value: the originality/value of this work is the ability of enabling scientists to empathize with both Brazıl and Colombia’s LCA perspectives in HEI.

Sustainable energy development had been signified as the pathways for the global energy transition, that drive important changes in how energy is being generated, transmitted, and consumed. The concept of Circular Economy (CE) has been proposed to address the environmental problem by minimizing the resource inputs and emission generation, reuse the waste and refuse from the conventional production process to obtain a further benefit. However, the contribution of CE to sustainable energy development and its link to Quintuple Helix (QH) elements is still ambiguous. This paper intends to fulfil this gap by examining the five main elements of the QH that contribute to the CE ecosystem, namely academia, companies, environment, government, and society. Innovative technologies from sludge management in urban wastewater sectors are discussed as the case study. A framework relating the QH with CE and innovation are proposed for future research. Practical recommendations associated with CE and sustainable energy policies are also provided.

Endowed with distinctive natural ecosystems and abundant biodiversity, regional environmental governance in developing countries, especially the environmentally sensitive areas (ESAs), is facing the daunting task to ultimately divert their regional development mode towards sustainable fashion through governance transition. However, given their less-developed status in particular expressed by under-developed economies, unsound political regimes, low governance capacity, such task seemingly insurmountable. In order to approach the incompatibility between economic development and maintenance of the ecosystem services value, and understand the complex and interlocked nature of the regional institution system of ESAs in developing countries, an ecosystem services value-based adaptive governance model was introduced to identify the deficiencies and failures of existing regional environmental governance and establish innovative arenas and transition agendas for innovating and reframing regional institutions and modifying role of regional actor groups and governance mode in the process of decision making on environmental issues. Such approaches were conducted in a circular diverting process in order to facilitate the mode of regional development transforming towards sustainable development. For demonstration the process of application and effectiveness of this methodology, a case study was conducted in a typical ESAs—the Water Source Area of the Middle Route Project of the South–North Water Diversion Project in China. Through integrating the ecosystem services value (ESV) assessment into a wider framework of institutional change, the regional institution system innovation and reformation was directed by taking the ESV changes and pattern of its geo-distribution in the research area as indicators or clues. Compared with traditional proposals for administrative change, the methodology proposed in this study was not prescriptive or directive: Rather, an approach for influencing the direction and speed of transition through a series of steering and coordination mechanism. Therefore, this model is with the potential to be implemented by local communities in regions, especially ESAs in developing countries, to encounter with similar regional development challenges and complex, interlocking, and over-dated regional institutional system associated with environmental issues.

Sub-Saharan Africa is currently experiencing growth in the number of people living in poverty, and the situation is worsening due to climate change and the COVID-19 pandemic. Cities are increasingly under stress because of urbanization and the demand for low-cost housing. Slum dwellers face daunting social, environmental, and economic challenges. Geospatial analysis of remote sensing, demographic, economic, social, and environmental data is being used to delineate slums. The application of circular economy guidelines for an intelligent transformation of slums combines technical and social innovation that reaches beyond the slums to the whole urban ecosystem. Examples of contributions to the circular economy are provided. Finally, some ideas are introduced on how the internet of things can improve access to goods and services and strengthen interconnectedness through the ability to participate more readily in the social dialogue of the city. The city of Accra in Ghana, West Africa, is discussed as a potential slum city to functional intelligent city transformation.

Europe leads in shaping circular bioeconomy (CBE) policies for sustainability, relying on dynamic research and innovation (R&I) projects to propel the transition. Increased European R&I investment, fueled by commitment and a societal demand for measurable project returns, lacks a comprehensive evaluation. This study provides an in-depth analysis of the alignment of European-funded R&I projects with CBE policy priorities and assesses their societal impact. Rooted in an interpretive paradigm, it employs content analysis through semi-structured questionnaires to survey project leaders. The study evaluates benefits using the triple bottom line concept and interprets results guided by the theory of change. Our results suggest that European-funded R&I projects actively cultivate a supportive ecosystem for CBE adoption, as evidenced by emerging themes such as knowledge sharing, capacity building, and collaborative learning, aligning closely with investment priorities and funding schemes. The societal impact focuses on the short and medium term, emphasizing the social dimension by committing to empowering individuals, fostering collaboration, and enriching knowledge. Long-term benefits primarily contribute to the economic dimension, highlighting the potential for positive impacts like promoting business growth, innovation, improving market efficiency, and fostering sustainability. This study seeks to enhance the impact of R&I projects and promote a paradigm shift towards sustainability by providing context-specific recommendations.

The purpose of the article is to study the priority areas of reconfiguration of business models of industrial enterprises to solve the problem of increasing their stability in an unstable economic situation. The paper reveals the essence and structural components of business models. It is proved based on the analysis of literary sources that the business model with the help of narratives, figures, and graphic models describes how the organization creates, delivers, and captures value in the existing context. With this in mind, the key vectors of business model innovation of industrial companies using the potential of Industry 4.0 technologies are identified. First, the possibilities of transforming business models based on the introduction of digital technologies as drivers of transformation (blockchain, Internet of Things, Artificial intelligence, etc.) are justified, and the feasibility of complex application of digital technologies for business model innovation is established. Secondly, the content of the reconfiguration of business models in line with the ecosystem approach and the creation of open digital ecosystems of economic entities in the industrial sphere is revealed. Third, the importance of creating circular business models of industrial companies that reflect the transition from the classical linear model of production to the closed-cycle model is justified. It is determined that together these vectors of reconfiguration of business models of industrial enterprises will ensure the growth of the sustainability of manufacturing companies as a result of the growth of the connectivity of the environment, resource efficiency, and data-driven “smart” management.

The concept of sustainable healthcare is the subject of an increasingly intense, captivating, forward-looking, yet sometimes still overly theoretical debate. The aim of this contribution is to analyze the current scenarios of ecological and digital transition in the healthcare sector, considering its high energy consumption. In particular, we adopt a holistic and convergent vision of the energy mix and its infrastructure, moving beyond the ideological dichotomy of energy sources. Renewable sources, digital innovations, and the circular economy are seen as playing key roles in the future of the energy sector. In this research, a mixed methodology was employed, combining a questionnaire consisting of 31 questions with semi-structured interviews conducted with the top management of a major player in the private healthcare sector located in southern Italy in 2023. Consequently, we examine the main macro-guidelines of technological development, encompassing enabling technologies, new business models, roles, and professional skills. Based on the analyses conducted, we provide some insights to inform governmental policies and industrial strategies in the near future. Digitalization represents an opportunity to enhance the efficiency of healthcare services, reducing waste and ensuring quality. For instance, digital healthcare solutions enable personalized care on a global scale and offer decision support systems that can enhance overall healthcare performance. However, to maximize the benefits of digital transformation, it is essential to integrate new technologies effectively and sustainably into the existing healthcare ecosystem. A promising example is telemedicine, which can help reduce carbon emissions by decreasing healthcare workers’ travel.

The creation of climate-neutral industrial ecosystems based on digital leadership determines the movement of advanced countries towards competitiveness on the global stage. Industrial ecosystems of most regions of Ukraine are characterized by a low technological level of key industries and lack of organizational routines that can ensure their transition to a higher technological and resource-efficient level. The problem of forming a modern policy in the field of revitalization of abandoned areas of former industrial use (brownfields), in particular in the field of industrial waste processing, needs an urgent solution. The article is aimed at highlighting the theoretical foundations and practical aspects of creating a new industrial path through the revitalization of brownfields in underdeveloped industrial ecosystems on the example of old industrial mining regions. The paper proposes the use of a bricolage approach to create a new path of development of old industrial mining regions. This approach focuses not on the breakthrough development of the new industry, which is almost impossible in the conditions of insufficient development of industrial ecosystems, but on the gradual process of strategic cooperation of many participants (local and non-local enterprises, research institutes, local authorities, community, national and regional authorities, other stakeholders), coordination and pooling of resources at different levels, which will eventually have to evolve together, thus leading to a favorable institutional environment for the new industry. The establishment of an enterprises for the processing of coal preparation within the framework of the brownfield revitalization project is a kind of a kludge, the temporary adaptation of the community to the complex socio-economic and environmental situation, which is a consequence of the cessation of intensive coal mining, which will make it possible to create new routines of business behavior of institutions and citizens, the best of which in the process of evolutionary selection will be able to adapt to the new challenges of global technological transformations in industry and ecology. The practical implementation of the given approach is primarily represented in the creation of special institutions that are alternatives to the institutional traps of industrial development on the principles of the circular economy and relate to the introduction of more strict measures when implementing European waste management standards in national legislation and additional taxes that force enterprises to recycle waste; emergence of special enterprises (scavengers and decomposers) that use new effective disposal measures to restore and further use brownfields; creation of special community development corporations that promote economic development and environmental sustainability of the territory and ensure broad community participation in the creation of initiatives and decision-making; use of opportunities for Ukrainian integration in the field of innovation, science and education under the Association Agreement signed with the European Union in order to make effective decisions on the revitalization of brownfields.

In the contemporary business landscape, the adoption of Sustainable Business Practices has evolved beyond a trend to become an imperative for organizations seeking to intertwine commerce with environmental stewardship. This article explores the multifaceted realm of sustainable business practices, emphasizing the integration of environmental impact management into modern commerce strategies. From supply chain optimization and energy efficiency to waste reduction and circular economy principles, businesses are urged to adopt a holistic approach. The article also underscores the ethical dimensions of consumer education, employee engagement, and transparent marketing in fostering a sustainable corporate culture. Beyond the ethical imperative, the business case for sustainability is compelling, with enhanced brand reputation, increased customer loyalty, and operational efficiency being tangible benefits. Despite initial challenges, the adoption of sustainable practices presents opportunities for innovation and long-term competitiveness. As businesses navigate a world where sustainability is synonymous with success, they redefine commerce strategies, illustrating that profitability and environmental responsibility are not mutually exclusive but interconnected pillars of a thriving and resilient business ecosystem.

The textile industry sector is classified as the most polluting sector and has the greatest direct impact on the life of the entire ecosystem. The main objective of this article is to study the role of sustainability (eco-innovation and circular economy) in the internationalization of the textile industry in Portugal. For this, a qualitative methodology was used, through semi-structured interviews applied to four managers of the textile sector, in the north of Portugal. The results of the interviews were submitted to a content analysis and data coding system using the NVIVO software. The results show that sustainability is a pillar of direct and/or indirect internationalization, either through the demand of the consumer for sustainable products or through the availability of the products produced by companies; this is motivated mainly by customers, even if the high price of these products when they reach the market is concerning. With the results achieved, this article shows that the determining factor for eco-innovative and recycled products is the price factor. The high price that eco-innovative and recycled products have when they reach the market is the main concern that the companies interviewed have in terms of investing more in this type of product. However, they claim that there is a clear increase in demand for these products and that it is a differentiating factor in international markets. It also became evident that the existence of products from the circular economy increases the companies’ value and acceptance in international markets. This article provides empirical evidence that shows that the transition from a linear to a circular economy requires large investments in most cases; however, it is currently a competitive advantage and a positioning in a differentiating sector, increasing the brand’s social responsibility.

The continued increase in global trade protectionism, refinement of labor division, high innovation cost, and development of information technology have led to many enterprises actively being engaged in innovation to improve their national economic competitiveness. Although significant research has been carried out on this by numerous academic institutions, little is known about innovation trends in Chinese enterprises. In the existing methods of literature research, the scientific knowledge map, which, based on bibliometrics, is an effective tool for management knowledge, can visually describe the knowledge resources and their carriers under the state of time series and provides a new way for literature analysis. In this paper, the CiteSpace tool was used to map knowledge domains. A total of 459 and 5645 studies published between 2010 and 2020 were downloaded from the CNKI and Web of Science databases. By analyzing the keywords “co-occurrence matrix”, “author cooperation networks”, and “high-frequency cited literatures”, we found the differences of the research current, hotspots, and trends both in China and the world, but we were not limited to these. The research results are as follows: In China: (1) There were 759 nodes in the map of key authors, which shows that innovation chain research in China is still in the early stages. In addition, the layout of author nodes was relatively scattered while density was low; therefore, it was hard to form clusters. There is a need to strengthen academic cooperation to improve research on innovation chains. (2) From the keyword network analysis map of the innovation chain, we found that the Chinese research hotspots were: innovation chain, industrial chain, collaborative innovation, scientific and technological innovation, innovation-driven, technological innovation, strategic emerging industries, innovation ecosystem, and integration of industry and education, among other fields. In the world: (1) Most academic studies on the innovation chain have been published in different fields; these journals are about production, operation, management science, and economy, among others. These findings show that the innovation chain has received attention from multiple disciplines, and, therefore, it belongs to an interdisciplinary research field. Studies from different fields have analyzed the innovation chain from their own research perspectives. Therefore, current research outcomes on the innovation chain are difficult to unify. (2) The most important authors and key studies were analyzed. According to the co-citation map, studies on the “innovation chain” with high co-citation frequencies were not studies on the innovation chain but had the innovation chain as a theme or a concept without in-depth research on the innovation chain. (3) Through co-citation and cluster analysis of keywords, we found that international studies on the “innovation chain” are more focused on the global value chain, blockchain technology, strategic analysis, sustainable development, and absorptive capacity among other fields. Research frontier themes were mainly communication technology, continuous operation management, technological change, ecological innovation, supply chain integration, Industry 4.0, logistics innovation, nanotechnology, circular economy, and supply chain innovation, among other fields. Therefore, international scholars focus more on: technological issues related to innovation, using advanced communication technology, blockchain technology, and nanotechnology to improve innovation abilities. Moreover, they insist on sustainable development in the process of innovation, advocating for green innovation and ecological innovation. Finally, results of the visualization show that current research is mainly focused on innovation, not the innovation chain. Therefore, experts in this field should pay more attention to the study of structural stability and knowledge mobility of the innovation chain.

The circular economy (CE) model has gained greater recognition and acceptance in recent years for its potential to enhance sustainability. Within this context, many practices in the retail sector are being overhauled through technological innovation, thereby changing the business landscape. Digitalization facilitates this transformation to mitigate the impacts of climate change without sacrificing productivity. This article explored the implications of digitalization in retail processes for CE in Nigeria and advanced practices that improve efficiency. Research efforts on circularity and digitalization have concentrated on advanced economies; consequently, little is known about the situation in lower-income countries. Due to the exploratory nature of this research, a qualitative approach that combined multiple data sources was adopted. Specifically, a case study of four major grocery retailers was carried out through documentary evidence supplemented by integrating thematic categories from semi-structured interviews with seasoned retail professionals. The findings revealed that (i) the circularity paradigm is a relatively vague concept among retailers in Nigeria; (ii) digital technologies are adopted primarily for the business value they create rather than to regenerate the ecosystem; (iii) the retailers have adopted technological processes such as e-commerce channel, automation, real-time tracking, social media marketing, and digital payment; and (iv) retailers familiar with circularity favor shortening supply chains by investing in rural hubs, food waste reduction, and closed-loops and reducing the use of non-biodegradable packaging. Retail managers could gain insights from these results to move towards CE, foster efficient business processes, and enhance customer satisfaction.

BADRI GECHBAIA Doctor of Economics, Associate Professor, Head of Department of Business Administration, Management and Marketing, Batumi Shota Rustaveli State University, Georgia. E-mail: gechbaia.badri@bsu.edu.ge http://orcid.org/0000-0003-2815-2228 მოკლე აღწერა “MANAGEMENT IN THE FIELD OF WASTE MANAGEMENT IN THE CONDITIONS OF TRANSITION TO THE CIRCULAR ECONOMY IN UKRAINE” Authors (Viktor Koval, Inessa Mikhno and Mariana Petrova) Public welfare is the most important socio-economic category in macroeconomics. The level of social welfare of citizens is determined by the compliance of actual indicators with existing norms and standards, however, it is rarely used when comparing effective economic indicators among countries of the world. However, taking into account negative environmental externalities leads to a violation of the market situation and a decrease in the country's GDP in conditions of environmental degradation and irrational use of natural resources. The basis for the introduction of a circular economy is the sorting and recycling of waste, minimizing negative externalities in production activities. Ukraine has a negative tendency to introduce recycling, and most industrial enterprises use outdated, environmentally hazardous technologies that negatively affect the ecosystem. The processes observed in Ukraine are cumulative in nature, and the development is due to ecosystem degradation, that is, when negative losses in cash are taken into account, most enterprises must have negative indicators of economic activity, since more than could be spent on restoring the natural environment and production costs get profit from the sale of goods. Therefore, in the proposed monograph, sponsored by Viktor Koval, Inessa Mikhno and Mariana Petrova “Management in the field of waste management in the transition to the circular economy in Ukraine”, the problems of the formation of a circulating economy where the basis is the waste management scheme are investigated. The monograph studies that the filtrate from landfills is enriched with toxic substances that make up the waste, or are products of their decomposition (heavy metals, organic, inorganic compounds) and negatively affects the vital activity of soil microflora and plants, the enzymatic activity of soils and their fertility, and therefore the quality of agricultural products. The scientific results of the study indicate the solution of a number of theoretical and methodological issues of improving the sphere of household waste disposal in Ukraine, the methods of analytical accounting of losses from the functioning of landfills. The author’s scientific novelty consists primarily in substantiating the current situation in the field of waste management from the perspective of maximizing public welfare, creating models of anthropogenic impact on the ecosystem and models for analyzing the degree of introduction of the circular economy in the country, which contribute to the introduction of new environmentally and economically sound technologies in Ukraine. In the applied aspect, it represents the conceptual basis developed by the author for the formation of a model for calculating the anthropogenic impact on the ecosystem and forecasting the introduction and development of a closed-loop economy in Ukraine, which is based on the scientific, technological and innovative development of resource-saving systems based on the formation of the waste processing and utilization industry. The experience of the developed countries of the world indicates the possibility of achieving significant economic, environmental and social effects through the formation of the waste management industry and turning it into an integral element of the socio-economic infrastructure of regional economies. The monograph highlights the problem of increasing the amount of waste and the environmental impact of landfills, and evaluates macroeconomic indicators taking into account the environmental impact factor. A comprehensive theoretical analysis of the current state of the sphere of waste disposal, a justified organizational and economic basis for their disposal, and ways to solve the problem of waste accumulation are considered. The scientific results of the study indicate the solution of a number of theoretical and methodological issues of improving the sphere of household waste disposal in Ukraine, which increases the function of the country's public welfare. Using the models indicated in the monograph, it is possible to calculate the environmental burden from anthropogenic activities, determine the damage done and analyze the degree of introduction of the circular economy in a country or region. Technologies and strategies for introducing a circulating economy have been developed and partially implemented in developed countries, therefore, Ukraine can adapt them to internal capabilities and needs, and will reduce risks associated with innovation. The evolution of the economies of countries is necessary for the simultaneous development of the world economy and increase the potential of Ukraine and improve the quality of life of the population. The monograph of the authors Viktor Koval, Inessa Mikhno and Mariana Petrova “Management in the field of waste management in the transition to the circular economy in Ukraine” is a significant contribution to solving complex methodological problems associated with preserving the environment and developing a closed-loop economy in Ukraine.

In the rapidly evolving landscape of global waste management, the disposal and recycling of electronic waste (e-waste) present significant challenges and opportunities, particularly in the context of recovering critical metals essential for various high-tech and green technologies. This paper sets out to provide a comprehensive evaluation of the current practices and technologies deployed in Malaysia for recycling e-waste, with a particular emphasis on the recovery of such critical metals. Our investigation delves into the economic and environmental dimensions of e-waste recycling processes, assessing their viability, sustainability, and the potential impacts on both the local ecosystem and the global supply chain of critical raw materials. The primary aim is to dissect the intricacies of existing e-waste management frameworks in Malaysia, identifying the bottlenecks that hinder the efficient recovery of valuable metals and evaluating the overall effectiveness of these systems in terms of economic returns and environmental conservation. Through this analysis, the paper aims to illuminate the innovative approaches and technological solutions that can be harnessed to enhance the recovery rates of critical metals, thereby reducing the environmental footprint of e-waste and contributing to a more circular economy. Furthermore, the paper seeks to bridge the gap between the current state of e-waste recycling in Malaysia and the ideal, optimized processes that balance economic growth with environmental stewardship. By highlighting the benefits and challenges associated with the recovery of critical metals from e-waste, this study underscores the importance of adopting an integrated approach that encompasses policy reform, technological innovation, and stakeholder engagement. In doing so, it provides a roadmap for Malaysia and similar economies facing the dual challenge of e-waste management and resource scarcity, offering insights into creating sustainable, resilient, and economically viable recycling ecosystems.

The article analyses the preconditions for shaping and developing the concept of a green economy. The stages of the evolutionary development of the circular economy are considered: work with waste; environmental performance strategies; maximum conservation in the era of resource depletion. Having analysed the scientific opinions on the emergence of “circular economy”, the paper has found out that this concept is identified with the terms “round economy”, “cyclical economy”, “recovery economy”, “closed-cycle economy”, “green economy”. The approaches of different scientific schools to the category of “circular economy” are analysed and conventionally systematized into 12 groups: closed-cycle economy; renewable resource economy; alternative to traditional linear economy; global economic model; closed-loop economic system based on R-principles; the concept of economic development; sustainable development strategy; a "green" economy instrument; business philosophy; economic activity; use of production waste; recycling of secondary raw materials. There is proposed the authors' formulation of the circular economy as an innovative approach to organizing logistics processes based on the closed movement of resources with their minimum losses in the form of waste and the maximum involvement of secondary resources in production in order to achieve sustainable development of logistics systems. The article identifies the barriers preventing the implementation of the circular economy concept, among them being regulatory, institutional, economic, financial and investment, market, technological, informational, and cultural. The article considers the best practices of effective implementation of circular economy solutions on the example of Finland. The indicators of the development of the green technologies market in the world and the national logistics system of Ukraine under conditions of a circular economy are analysed. It has been established that many conceptual approaches to the definition of the terms “green logistics” and “environmental logistics” are generally accepted and have a broader meaning, without taking into account the functioning specificity of various spheres of economic activity, including transport and logistics. Scientific views on interpreting the essence and content of the concept "green logistics" are generalized. It is proposed to consider the term "green logistics" from three angles: a circular economy instrument; a component of business corporate social responsibility; and a type of economic activity aimed at reducing the negative impact on the ecosystem and the environment. In order to effectively implement the concept of green logistics, an organizational and economic mechanism has been developed, the main elements of which are: diagnostics of the current state, features and trends in the logistics systems' development, taking into account the environmental component; exogenous and endogenous factors affecting the development of logistics systems; risks in organizing the processes of logistics activities; subjects and objects of management, goals, objectives, principles, functions, tools, methods, management tools, information technology, criteria. The priority principles of forming an organizational and economic mechanism include consistency, integration, reliability, dynamism, compliance with the goals of sustainable development, and efficiency. A structural diagram of forming an organizational and economic mechanism for implementing the concept of green logistics is proposed, including the following blocks: management of material resources’ supplies and purchases; products manufacturing; warehousing and stocks; logistic flows; the risks of logistics activities; logistics service processes; recycling of waste; innovation and transformations. Introduction of the proposed organizational and economic mechanism will reduce the cost of managing the movement of logistics flows and increase the level of environmental safety. This is one of the most important requirements for implementing the concept of business corporate social responsibility in a circular economy.

Sustainable entrepreneurship has emerged as a pivotal force in the contemporary business landscape, with a growing emphasis on environmentally conscious practices that reconcile economic prosperity with ecological stewardship. This paper provides a comprehensive review of green business practices within the context of sustainable entrepreneurship, shedding light on the multifaceted dimensions of environmental impact. The study delves into the core principles that underpin sustainable entrepreneurship, examining the integration of environmental considerations into business strategies and operations. Entrepreneurs, driven by a heightened awareness of global environmental challenges, are increasingly adopting eco-friendly practices to mitigate negative effects on the planet. The paper explores various green business models, such as circular economy approaches, eco-innovation, and sustainable supply chain management, as key enablers of sustainable entrepreneurship. Furthermore, the environmental impact of sustainable entrepreneurship is assessed through an examination of case studies and empirical evidence. From reduced carbon footprints to resource efficiency and waste reduction, the positive outcomes of green business practices are elucidated. The paper also highlights the potential challenges and barriers faced by sustainable entrepreneurs, such as market acceptance, regulatory constraints, and financial implications. Understanding these challenges is crucial for fostering a supportive ecosystem for sustainable ventures. Additionally, the review addresses the role of technology and innovation in driving sustainable entrepreneurship forward. Technologies like renewable energy, advanced materials, and data analytics are explored as catalysts for environmentally friendly business practices. The paper emphasizes the need for continuous research and development to enhance the effectiveness and scalability of green solutions. This review contributes to the growing body of knowledge on sustainable entrepreneurship by offering a comprehensive overview of green business practices and their environmental impact. As businesses worldwide grapple with the imperative of sustainable development, the insights presented herein serve as a valuable resource for entrepreneurs, policymakers, and researchers seeking to navigate the intersection of economic growth and environmental responsibility.

This research explores the role of Circular Design and education in facilitating the transition to a Circular Economy for SMEs and start-ups. Despite accessible resources in Circular Design, the extent of their adoption by businesses—and e specially SMEs, who face resource limitations and lack scientific access—remains uncertain. Circular Design operates at a systemic level, requiring consideration of economic, social, and environmental aspects in innovation processes. This study analyzes existing tools and their alignment with SME needs, identifying critical areas for Circular Design adoption. The analysis reveals an emerging and diverse set of resources supporting circular transitions. Learning Ecosystems for the Circular Economy are characterized by multi-sectoral partnerships, flexible learning approaches, and digital advancements. Three key directions emerge for developing Learning Ecosystems: assessing companies’ circular maturity, integrating circular design into company culture, and fostering collaboration with innovation ecosystems. In conclusion, this research lays the groundwork for implementing targeted Learning Ecosystems to advance circularity within SMEs, emphasizing the importance of collaboration and innovative approaches in circular innovation.

The article is devoted to the generalization of the main provisions of the leading economic theories in the field of investment, the main stages of the development of the investment process research theory are systematized. The purpose of the article is to study the evolution and systematization of the theoretical foundations that reveal the essence of investment relations, and their deepening of the theory in the context of the concept of sustainable development actualization, the knowledge economy, and the formation of the information economy. It has been proven that there is a close internal connection between investments and innovations, leading investments in ensuring economic growth and the transition to the technological structure of Industry 4.0, implementing structural and institutional transformations, digitizing the investment process, overcoming the negative impact of the Covid-19 pandemic, military conflicts, etc. The author critically reviewed the position of the leading economic schools in the field of investment and made a conclusion regarding the development of the investment activity research theory, as well as changes in the investment behavior of business entities. The methodological approaches of the classical, neoclassical, Keynesian, and institutional economic schools, which are set forth in the theories of investment and accumulation, are systematized, revealing the issue of the investment process transformation under the influence of endogenous and exogenous factors. It was concluded that the investment process of reproduction of social capital, on which economic development is based, changes within the historical transformation of the entire system of economic relations, which led to the improvement of investment quality in accordance with the challenges of the economy industrial development. It has been proven that the system-synergistic methodology has the highest level of validity and effectiveness for researching the investment category, as it allows to deepen the understanding of the investment category. The author emphasizes that the system-synergistic methodology takes into account the information and ecosystem nature of the modern investment process, which reflects the non-linear trends of movement and development of the economic system, and is also a mechanism for innovation by business entities. It is substantiated that investment is an independent economic category, which represents the process of accumulation and extended reproduction of social capital, which are considered as a single integrated complex system. It is argued that investments represent a complex multi-level, multi-subject and multi-object system of relations regarding the accumulation of social capital in the national economy. It has been proven that the development of investment processes at the macro-, meso-, and micro levels in modern conditions requires the creation of an appropriate ecosystem for the organization of the investment process, the effective functioning of which is achieved under the condition of full satisfaction of all stakeholders interests. It was highlighted that in the context of the actualization of the sustainable development concept, circular and green economy, it is necessary to ensure the implementation of sustainable investment in order to increase socially responsible economic development based on ESG development standards. Key words: investment theories, investment process, investment, investment ecosystem, sustainable investment, digitalization.

The article is devoted to the generalization of the main provisions of the leading economic theories in the field of investment, the main stages of the development of the investment process research theory are systematized. The purpose of the article is to study the evolution and systematization of the theoretical foundations that reveal the essence of investment relations, and their deepening of the theory in the context of the concept of sustainable development actualization, the knowledge economy, and the formation of the information economy. It has been proven that there is a close internal connection between investments and innovations, leading investments in ensuring economic growth and the transition to the technological structure of Industry 4.0, implementing structural and institutional transformations, digitizing the investment process, overcoming the negative impact of the Covid-19 pandemic, military conflicts, etc. The author critically reviewed the position of the leading economic schools in the field of investment and made a conclusion regarding the development of the investment activity research theory, as well as changes in the investment behavior of business entities. The methodological approaches of the classical, neoclassical, Keynesian, and institutional economic schools, which are set forth in the theories of investment and accumulation, are systematized, revealing the issue of the investment process transformation under the influence of endogenous and exogenous factors. It was concluded that the investment process of reproduction of social capital, on which economic development is based, changes within the historical transformation of the entire system of economic relations, which led to the improvement of investment quality in accordance with the challenges of the economy industrial development. It has been proven that the system-synergistic methodology has the highest level of validity and effectiveness for researching the investment category, as it allows to deepen the understanding of the investment category. The author emphasizes that the system-synergistic methodology takes into account the information and ecosystem nature of the modern investment process, which reflects the non-linear trends of movement and development of the economic system, and is also a mechanism for innovation by business entities. It is substantiated that investment is an independent economic category, which represents the process of accumulation and extended reproduction of social capital, which are considered as a single integrated complex system. It is argued that investments represent a complex multi-level, multi-subject and multi-object system of relations regarding the accumulation of social capital in the national economy. It has been proven that the development of investment processes at the macro-, meso-, and micro levels in modern conditions requires the creation of an appropriate ecosystem for the organization of the investment process, the effective functioning of which is achieved under the condition of full satisfaction of all stakeholders interests. It was highlighted that in the context of the actualization of the sustainable development concept, circular and green economy, it is necessary to ensure the implementation of sustainable investment in order to increase socially responsible economic development based on ESG development standards. Key words: investment theories, investment process, investment, investment ecosystem, sustainable investment, digitalization.

Among other functions, the INIA is involved in national and international cooperation in the field of agri-food research. The process of identifying and classifying gaps in our knowledge forms an essential part of this effort. This article describes that process, the tools and the materials used to achieve the final objective, namely, the identification of research priorities in the Spanish agri-food sector in order to deal with the societal challenges posed by society and the stakeholders involved. These challenges, within the context of the bioeconomy, are the sustainability of primary and forestry production systems, the safety and quality of food and bioproducts as well as the competitiveness of farmers and companies in this sector. It is necessary to optimize resource management and means of production along with improved efficiency to guarantee sustainability throughout the value chain process. The main goal, under the current scenario of climate change, is to develop models which lead to a balance between food quality and production costs (competitiveness and economic sustainability), ecosystem conservation and mitigation of the environmental impacts (environmental sustainability) while maintaining the population in rural areas (social sustainability). These models will be based on new technology in both intensive and extensive production systems. They should support the improvement and valuation of traditional products together with the formulation and development of foods with new functionalities and quality while at the same time ensuring safety. As well as satisfying consumer demand, improved knowledge must lead to a more efficient use of our own resources and by-products within the framework of a circular economy, including the development of bioproducts, eco-innovation and eco-design.

Guizhou is one of the first national ecological civilization pilot zones selected, which needs to play a leading role in the road of ecological civilization construction.The good ecological environment status quo and the continuous high growth rate of economic development provide a research basis for the project. In-depth analysis of the relationship between ecological environment and economic development, to provide scientific suggestions for the solid progress.The main achievements of the research are as follows: (1) Construct the practice evaluation index system of “Two mountains” in ecological civilization pilot area in Guizhou Province, and the overall evaluation is “high” (2) the evaluation result of “Two mountains” in Bijie pilot area shows that the evaluation result of “Two mountains” practice index in Bijie pilot area increased from 0.056 in 2015 to 0.107 in 2019, the comprehensive index of ecological civilization in Bijie pilot area increased steadily, and the total value of green water and green mountains in Bijie pilot area was 4201235.478 billion yuan in 2019(3) The fitting curve of the relationship between environmental and economic benefits in Chishui River Basin in Guizhou Province shows that the ecological environment protection work in Guizhou Province effectively promotes the rapid improvement of environmental benefits and economic benefits; (4) the accounting of ecosystem service value in Chishui City shows that the total value of Chishui city in 2019 was 4, 2170.788 billion yuan; (5) Summarize the “two mountains theory” in Guizhou innovation practice experience and model, put forward “speed up the construction of green ecological system, improve environmental carrying capacity” “speed up the construction of characteristic industry system, improve urban economic strength” “speed up the construction of modern urban system, improve the urban agglomeration ability” “vigorously develop circular economy, efforts to promote production mode change” “actively guide form green low carbon consumption pattern” and so on five countermeasures.

HighlightsThe challenge to agriculture is to adapt the circularity observed in complex natural systems into practical applications for producers and their value chains.Diversification and complexity can enable agricultural input and output processes that mimic natural circles of life that make, use, recycle, and reuse resources.Producers must find their own circular systems that work in a particular time, geography, and set of conditions and establish feedback loops that enable continuous adjustment and adaptation as situations change.Investments in foundational and applied sciences, technologies, and innovations are needed to expand knowledge of agricultural systems and the tools and strategies that will enable continuous adaptative management over time.Abstract. Circularity in agriculture and food systems holds promise for recovering lost resources and addressing the unintended consequences of linear production. The challenge to agriculture is to adapt the circularity observed in complex natural ecosystems into practical applications for producers and their value chains, thereby shifting intensive linear systems away from the single goal of optimizing monoculture productivity toward circles of life capable of producing multiple benefits concurrently. Mixed multi-plant and animal agricultural systems that leverage integrated land management and biodiversity have potential to deliver multiple benefits, including increased productivity, pest and disease control, water quality, soil health, and economic profitability. Replacing linear “take, make, and dispose” systems with circular “make, use, recycle, and reuse” systems offers solutions for managing input costs and gaining income and ecosystem benefits from wastes that are otherwise lost and can harm agro-ecosystems. Technologies, innovations, and practices that reinforce and expand whole-system management, build on local conditions and knowledge, and that deliver multiple benefits beyond optimum production will be necessary for circular systems to emerge. This article provides several examples of current farm applications and experimentation with circular systems as practical solutions at different scales relevant to a range of production systems in developed, developing, and underdeveloped countries. Keywords: Agriculture, Biodiversity, Circles of life, Circular systems, Complexity, Farmers, Food systems, Innovations, Linear treadmills of production, Mixing species, Multi-benefit production, Technologies.

PurposeThe shift toward a circular economy (CE) represents a collaborative endeavor necessitating the presence of efficient frameworks, conducive contexts and a common comprehension. This research serves as a pivotal stride towards this goal, presenting an exclusive prospect for the investigation and fusion of these frameworks, with particular emphasis on the Quintuple Helix Model (5HM), into a unified theoretical framework that underscores the core principles of the CE. This study is centered on three pivotal questions aimed at decoding the CE transition in specific regional settings.Design/methodology/approachAdopting an abductive approach firmly anchored in a two-stage qualitative process, this study specifically merges the foundational principles from institutional theory, entrepreneurship literature and CE frameworks to provide insights into the dynamics of circular ecosystems, with a specific focus on the Huelva region in Spain.FindingsThe findings demonstrate significant potential in the CE, ranging from the integration of product and service systems to innovations in eco-industrial practices. Yet, a notable deficiency exists: the absence of institutional entrepreneurs, highlighting the essential role that universities can play. As recognized centers of innovation, universities are suggested to be key contributors to the transformation toward a CE, aligning with their societal and economic responsibilities.Practical implicationsThis study highlights the importance of managing relationships with entities like SMEs and policymakers or academia for effective CE adoption. Policymakers can refine strategies based on the research’s insights, while the impact of university-driven circular ecosystems on sustainable societies is another crucial area for research.Originality/valueThe sustainability models cited in CE literature may not be comprehensive enough to prevent problem shifting, and it can be argued that they lack a sound theoretical and conceptual basis. Furthermore, the connections between sustainability objectives and the three levels of the CE operating system remain vague. Additionally, there is insufficient information on how regions foster the involvement of the environment in fivefold helix cooperation and how this impacts the CE.

International Journal of Innovation - IJI completes 7 yearsInternational Journal of Innovation - IJI has now 7 years old! In this editorial comment, we not only want to talk about our evolution but get even closer to the IJI community. It is our first editorial comment, a new IJI's communication channel. Some of the changes are already described on our website.IJI is an innovation-focused journal that was created to support scientific research and thereby contribute to practice. Also, IJI was born internationally, receiving and supporting research from around the world. We welcome articles in Portuguese, English, and Spanish.We have published eight volumes in IJI since 2013, totaling 131 articles. Our journal is indexed in: Dialnet and Red Iberoamericana de Innovación y Conocimiento Científico; Ebsco Host; Erih Plus; Gale - Cengage Learning; Latindex; Proquest; Redalyc; Web of Science Core Collection (Emerging Sources Citation Index), among others. We provide free access “open access” to all its content. Articles can be read, downloaded, copied, distributed, printed and / or searched.We want to emphasize that none of this would be possible without the authors that recognized in IJI a relevant journal to publicize their work. Nor can we fail to mention the tireless and voluntary action of the reviewers, always contributing to the articles' improvement and skilling up our journal, more and more.All editors who passed through IJI have a fundamental role in this trajectory. And, none of this would be possible without the editorial team of Uninove. Everyone who passed and the current team. We want to express that our work as current editors of IJI would not be possible without you. Changes in the Intenational Journal of Innovation – IJIAs we mentioned earlier, IJI was born in 2013. And, over time, we are improving its structure always to improve it. In this section, we want to show some changes we made. We intend that editorial comments become a communication channel and that they can help our readers, authors, and reviewers to keep up with these changes.Although IJI is a comprehensive Innovation journal, one of the changes we want to inform you is that now, at the time of submission, the author will choose one of the available topics that best suit your article. The themes are: Innovative Entrepreneurship; Innovation and Learning; Innovation and Sustainability; Internationalization of Innovation; Innovation Systems; Emerging Innovation Themes and; Digital Transformation. Below, we present each theme so that everyone can get to know them:Innovative Entrepreneurship: emerging markets provided dynamic advantages for small businesses and their entrepreneurs to exploit the supply flows of resources, capacities, and knowledge-based on strategies oriented to the management of innovation. Topics covered in this theme include, for example: resources and capabilities that support innovative entrepreneurship; innovation habitats (Universities, Science and Technology Parks, Incubators and Accelerators) and their influences on the development of knowledge-intensive spin-offs and start-ups; open innovation, triple/quadruple helix, knowledge transfer, effectuation, bricolage and co-creation of value in knowledge-intensive entrepreneurship ecosystems; and adequate public policies to support innovative entrepreneurship.Innovation and Learning: discussions on this topic focus on the relationship between learning and innovation as topics with the potential to improve teaching and learning. They also focus on ways in which we acquire knowledge through innovation and how knowledge encourages new forms of innovation. Topics covered in this theme include, for example: innovative projects for learning; innovation-oriented learning; absorptive capacity; innovation in organizational learning and knowledge creation; unlearning and learning for technological innovation; new learning models; dynamics of innovation and learning; skills and innovation.Innovation and Sustainability: discussions on this topic seek to promote the development of innovation with a focus on sustainability, encouraging new ways of thinking about sustainable development issues. Topics covered in this theme include, for example: development of new sustainable products; circular economy; reverse logistic; smart cities; technological changes for sustainable development; innovation and health in the scope of sustainability; sustainable innovation and policies; innovation and education in sustainability and social innovation.Internationalization of Innovation: the rise of developing countries as an innovation center and their new nomenclature for emerging markets have occupied an important place in the international research agenda on global innovation and Research and Development (RD) strategies. Topics covered in this theme include, for example: resources and capabilities that support the internationalization of innovation and RD; global and local innovation and RD strategies; reverse innovation; internationalization of start-ups and digital companies; development of low-cost products, processes and services with a high-value offer internationalized to foreign markets; innovations at the base of the pyramid, disruptive and/or frugal developed and adopted in emerging markets and replicated in international markets; institutional factors that affect firms' innovation efforts in emerging markets.Innovation Systems: regulation and public policies define the institutional environment to drive innovation. Topics include industrial policy, technological trends and macroeconomic performance; investment ecosystem for the development and commercialization of new products, based on government and private investments; investment strategies related to new companies based on science or technology; Technology transfer to, from and between developing countries; technological innovation in all forms of business, political and economic systems. Topics such as triple helix, incubators, and other structures for cooperation, fostering and mobilizing innovation are expected in this section.Emerging Themes: from the applied themes, many emerging problems have a significant impact on management, such as industry 4.0, the internet of things, artificial intelligence or social innovations, or non-economic benefits. Intellectual property is treated as a cognitive database and can be understood as a technological library with the registration of the product of human creativity and invention. Social network analysis reveals the relationships between transforming agents and other elements; therefore, encouraged to be used in research and submitted in this section. The theoretical field not fully developed is not a barrier to explore any theme or question in this section.Digital Transformation: this interdisciplinary theme covers all the antecedents, intervening, and consequent effects of digital transformation in the field of technology-based companies and technology-based business ventures. The technological innovator (human side of innovation) as an entrepreneur, team member, manager, or employee is considered an object of study either as an agent of innovation or an element of the innovation process. Digital change or transformation is considered as a process that moves from the initial status to the new digital status, anchored in the theories of innovation, such as adoption, diffusion, push / pull of technology, innovation management, service innovation, disruptive innovation, innovation frugal innovation economy, organizational behavior, context of innovation, capabilities and transaction costs. Authors who submit to IJI will realize that they now need to make a structured summary at the time of submission. The summary must include the following information:(maximum of 250 words + title + keywords = Portuguese, English and Spanish).Title.Objective of the study (mandatory): Indicate the objective of the work, that is, what you want to demonstrate or describe.Methodology / approach (mandatory): Indicate the scientific method used in carrying out the study. In the case of theoretical essays, it is recommended that the authors indicate the theoretical approach adopted.Originality / Relevance (mandatory): Indicate the theoretical gap in which the study is inserted, also presenting the academic relevance of the discipline.Main results (mandatory): briefly indicate the main results achieved.Theoretical-methodological contributions (mandatory): Indicate the main theoretical and / or methodological implications that have been achieved with the results of the study.Social / managerial contributions (mandatory): Indicate the main managerial and / or social implications obtained through the results of the study.Keywords: between three and five keywords that characterize the work. Another change regarding the organization of the IJI concerns the types of work. In addition to the Editorial Comment and Articles, the journal will include Technological Articles, Perspectives, and Reviews. Thus, when submitting a study, authors will be able to choose from the available options for types of work. Throughout the next issues of the IJI, in the editorial comments, we will pass on pertinent information about every kind of work, to assist the authors in their submissions.Currently, the IJI is available to readers with new works three times a year (January-April; May-August; September-December) with publications in English, Portuguese and Spanish. From what comes next, we will have some changes in the periodicity. Next stepsAs editors, we want the IJI to continue with a national and international impact and increase its relevance in the indexing bases. For this, we will work together with the entire editorial team, reviewers, and authors to improve the work. We will do our best to give full support to the evaluators who are so dedicated to making constructive evaluations to the authors. We will also support authors with all the necessary information.With editorial comments, we intend to pass on knowledge to readers, authors, and reviewers to improve the articles gradually. We also aim to support classroom activities and content.Even with the changes reported here, we continue to accept all types of work, as long as they have an appropriate methodology. We also maintain our scope and continue to publish all topics involving innovation. We want to support academic events on fast tracks increasingly. About the articles in this edition of IJIThis issue is the first we consider the new organization of the International Journal of Innovation - IJI. We started with this editorial comment talking about the changes and improvements that we are making at IJI—as an example, showing the reader, reviewer, and author that the scope remains the same. However, at the time of submission, the author has to choose one of the proposed themes and have a mandatory abstract structured in three languages (English, Portuguese, and Spanish).In this issue, we have a section of perspectives that addresses the “Fake Agile” phenomenon. This phenomenon is related to the difficulties that companies face throughout the agile transformation, causing companies not to reach full agility and not return to their previous management model.Next, we publish the traditional section with scientific articles. The article “Critical success factors of the incubation network of enterprises of the IFES” brings critical success factors as the determining variables to keep business incubators competitive, improving their organizational processes, and ensuring their survival. Another published article, “The sharing economy dilemma: the response of incumbent firms to the rise of the sharing economy”, addresses the sharing economy in terms of innovation. The results of the study suggest that the current response to the sharing economy so far is moderate and limited. The article “Analysis of the provision for implementation of reverse logistics in the supermarket retail” made it possible to observe that through the variables that define retail characteristics, it is not possible to say whether a supermarket will implement the reverse logistics process. And the article “Capability building in fuzzy front end management in a high technology services company”, whose main objective was to assess the adherence among Fuzzy Front End (FFE) facilitators, was reported in the literature its application in the innovation process of a company, an innovative multinational high-tech services company.We also published the article “The evolution of triple helix movement: an analysis of scientific communications through bibliometric technique”. The study is a bibliometric review that brings essential contributions to the area. This issue also includes a literature review entitled “Service innovation tools: a literature review” that aimed to systematically review the frameworks proposed and applied by the literature on service innovation.The technological article “A model to adopt Enterprise Resource Planning (ERP) and Business Intelligence (BI) among Saudi SMEs”, in a new IJI publication section, addresses the main issues related to the intention to use ERPBI in the Saudi private sector.As we mentioned earlier in this editorial, IJI has a slightly different organization. With the new format, we intend to contribute to the promotion of knowledge in innovation. Also, we aim to increasingly present researchers and students with possibilities of themes and gaps for their research and bring insights to professionals in the field.Again, we thank the reviewers who dedicate their time and knowledge in the evaluations, always helping the authors. We wish you, readers, to enjoy the articles in this issue and feel encouraged to send your studies in innovation to the International Journal of Innovation - IJI.

In the conditions of the continuing crisis, determined both by external sanctions against Russia from several Western states, and the ongoing coronavirus pandemic, it is the industrial ecosystems of the country's regions that form innovative solvations with subjects of other industries and spheres of activity and are the main rational consumers of regional resources that combine the potential of innovative speed, high quality, adaptation to changing consumer demands, etc. This article examines the scientific and practical problem of the formation and functioning of innovation-oriented industrial solvates, the solution of which is in line with the new approach proposed by the authors to identify, determine the sources and rank the effects of innovative solvations in the regional industry. This approach is built on the concept of a circular economy, which is based on the assumption of the most rational organization and use of all types of resources of integrated industrial enterprises and related industries (spheres of activity), including through the use of end-to-end digital technologies. It has been proved that in various phases of the economic cycle, effective resource provision of solvation processes in the system of industrial innovations is of decisive importance, which means not only the rational distribution of limited resources between the participants of innovative solvations but also their lean and waste-free use in the production process.