Gotowa bibliografia na temat „Chromium-molybdenum steel”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Chromium-molybdenum steel”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Chromium-molybdenum steel"
Nazari, Ali, i Shadi Riahi. "Failure analysis of heat treated HSLA wheel bolt steels". Multidiscipline Modeling in Materials and Structures 6, nr 3 (24.09.2010): 373–82. http://dx.doi.org/10.1108/15736101011080114.
Pełny tekst źródłaHejmej, S. W., i C. A. Brown. "Influence of Low Temperature Thermomechanical Treatment on Some Properties of High Alloy Tool Steels". Journal of Engineering for Industry 107, nr 2 (1.05.1985): 119–26. http://dx.doi.org/10.1115/1.3185974.
Pełny tekst źródłaOta, Hiroki, Tomohiro Ishii, Takashi Samukawa, Takumi Ujiro i Hideaki Yamashita. "High Corrosion Resistance 21%Cr-0.4%Cu Ferritic Stainless Steel Contributing to Resource Conservation". Materials Science Forum 638-642 (styczeń 2010): 3435–40. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.3435.
Pełny tekst źródłaStoian, Elena Valentina, Maria Cristiana Enescu, Ivona Petre, Petre Cristian Fluieraru i Alexis Negrea. "Studies and Research on the Influence of Carbon and Chromium Content Aimed at Obtaining Superior Mechanical Characteristics of 16CD4 Steel Used in the Automobile Industry". Key Engineering Materials 750 (sierpień 2017): 39–44. http://dx.doi.org/10.4028/www.scientific.net/kem.750.39.
Pełny tekst źródłaNikitina, V. R., U. A. Pazilova i E. I. Khlusova. "Effect of vanadium and niobium on phase transformations in chromium-nickel-molybdenum shipbuilding steel." Voprosy Materialovedeniya, nr 2(114) (24.07.2023): 15–26. http://dx.doi.org/10.22349/1994-6716-2023-114-2-15-26.
Pełny tekst źródłaDeepa, M., G. Sahoo i S. K. Dhua. "Effect of molybdenum addition on hardenability of chromium-boron steels used for press hardening applications". Journal of Mining and Metallurgy, Section B: Metallurgy 54, nr 3 (2018): 339–47. http://dx.doi.org/10.2298/jmmb180427024d.
Pełny tekst źródłaBobyr, S. V., E. V. Parusov, T. M. Golubenko, O. E. Baranovska i I. M. Chuiko. "Study of the influence of cryogene processing on the characteristics of structure formation and fatigue resistance of 38KHN3MFA steel after preliminary thermal hardening". Fundamental and applied problems of ferrous metallurgy 36 (2022): 430–40. http://dx.doi.org/10.52150/2522-9117-2022-36-430-440.
Pełny tekst źródłaSchino, Andrea Di. "CORROSION BEHAVIOUR OF AISI 460LI SUPER-FERRITIC STAINLESS STEEL". Acta Metallurgica Slovaca 25, nr 4 (18.12.2019): 217. http://dx.doi.org/10.12776/ams.v25i4.1363.
Pełny tekst źródłaRajput, Deepak, Kathleen Lansford, Lino Costa i William Hofmeister. "Molybdenum-on-chromium dual coating on steel". Surface and Coatings Technology 203, nr 9 (styczeń 2009): 1281–87. http://dx.doi.org/10.1016/j.surfcoat.2008.10.029.
Pełny tekst źródłaZaman, Hainol Akbar, Safian Sharif, Mohd Hasbullah Idris i Anisah Kamarudin. "Metallic Biomaterials for Medical Implant Applications: A Review". Applied Mechanics and Materials 735 (luty 2015): 19–25. http://dx.doi.org/10.4028/www.scientific.net/amm.735.19.
Pełny tekst źródłaRozprawy doktorskie na temat "Chromium-molybdenum steel"
Susanto, Benny Laurensius Materials Science & Engineering Faculty of Science UNSW. "Kinetics of carbide dissolution in chromium + molybdenum steels during oxidation". Awarded by:University of New South Wales. Materials Science and Engineering, 2004. http://handle.unsw.edu.au/1959.4/19385.
Pełny tekst źródłaCollington, Rachel A. "Creep crack initiation and growth in 2.25% chromium-1% molybdenum alloy steel". Thesis, Sheffield Hallam University, 2001. http://shura.shu.ac.uk/3172/.
Pełny tekst źródłaLevin, Victor D. "Laves phase strengthening in a cold-worked iron-chromium-nickel-molybdenum austenitic stainless steel". Case Western Reserve University School of Graduate Studies / OhioLINK, 1993. http://rave.ohiolink.edu/etdc/view?acc_num=case1060348273.
Pełny tekst źródłaNorris, Richard H. "Creep crack growth behavior in weld metal/base metal/fusion zone regions in chromium molybdenum steels". Diss., Georgia Institute of Technology, 1994. http://hdl.handle.net/1853/19451.
Pełny tekst źródłaKim, Yeong Ho. "Chromium-free consumable for welding stainless steel corrosion perspective /". Columbus, Ohio : Ohio State University, 2005. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1133285376.
Pełny tekst źródłaTrueman, Anthony Roger. "Characterization and corrosion studies of high carbon tool steel/tungsten carbide metal matrix composites". Thesis, Queensland University of Technology, 1999.
Znajdź pełny tekst źródłaBORRO, JUNIOR ADAYR. "Estudo do efeito da nitretacao liquida e gasosa no comportamento mecanico de um aco ferramenta para trabalho a frio sinterizado 2,3 %C -12,5%Cr - 1,1%Mo - 4% V , temperado e revenido". reponame:Repositório Institucional do IPEN, 2001. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10948.
Pełny tekst źródłaMade available in DSpace on 2014-10-09T14:04:37Z (GMT). No. of bitstreams: 0
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
BORRO, JUNIOR ADAYR. "Estudo do efeito da nitretacao liquida e gasosa no comportamento mecanico de um aco ferramenta para trabalho a frio sinterizado 2,3 porcento C - 12,5 porcento Cr - 1,1 ... , temperado e revenido". reponame:Repositório Institucional do IPEN, 2001. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10948.
Pełny tekst źródłaMade available in DSpace on 2014-10-09T14:04:37Z (GMT). No. of bitstreams: 0
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
Strahin, Brandon L. "The Effect of Engineered Surfaces on the Mechanical Properties of Tool Steels Used for Industrial Cutting Tools". University of Akron / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=akron1506692623324192.
Pełny tekst źródłaLin, Sing-Min, i 林賜民. "Studies on Precision Grinding Characteristics of Chromium - Molybdenum Alloy Steel". Thesis, 1994. http://ndltd.ncl.edu.tw/handle/29588365628656821941.
Pełny tekst źródła國立成功大學
機械工程研究所
82
This thesis investigates the grinding characteristics of chromium-molybdenum alloy steel with the vitrified bonded CBN (cubic boron nitride) and Al2O3 wheel. The grinding forces, surface roughness and wheel wear were measured under various grinding conditions, and an optimum grinding condition was obtained. Using the 3-axis machining center, dynamometer and surface roughness testing machine, the grinding force and the surface roughness of the specimem under various grinding conditions for both alumina oxide and cubic boron nitride wheel. The experimental results showed that te grinding performance with cubic boron nitride is superior to that with alumina oxide. Based on the experimental results of this study, an optimum grinding condition was applied to the grinding of variable pitch lead screw with conical meshing elements. Then, the surface quality of the screw was measured.
Książki na temat "Chromium-molybdenum steel"
Machining of stainless steels and super alloys: Traditional and nontraditional techniques. Hoboken: John Wiley and Sons, Inc., 2015.
Znajdź pełny tekst źródłaWielgosz, Roman. Próba prognozowania trwałości stali chromowo-molibdenowych dla energetyki. Kraków: Politechnika Krakowska, 1988.
Znajdź pełny tekst źródłaYoussef, Helmi A. Machining of Stainless Steels and Super Alloys: Traditional and Nontraditional Techniques. Wiley & Sons, Incorporated, John, 2015.
Znajdź pełny tekst źródłaYoussef, Helmi A. Machining of Stainless Steels and Super Alloys: Traditional and Nontraditional Techniques. Wiley & Sons, Incorporated, John, 2015.
Znajdź pełny tekst źródłaAmerican Welding Society. AWS B2.1-5A-225 : 2022, Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Chromium- Molybdenum Steel , IN521 and ER90S-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 3/4 Inch [19 Mm] Thick, PWHT Condition, Primarily Pipe Applications : AWS B2.1-5A-225: 2022, Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Chromium- Molybdenum Steel , IN521 and ER90S-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 3/4 Inch [19 Mm] Thick, PWHT Condition, Primarily Pipe Applications. American Welding Society, 2022.
Znajdź pełny tekst źródłaAmerican Welding Society. AWS B2.1-5A-222 : 2022, Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel , ER90S-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 3/4 Inch [19 Mm] Thick, PWHT Condition, Primarily Pipe Applications : AWS B2.1-5A-222: 2022, Standard Welding Procedure Specification for Gas Tungsten Arc Welding of Chromium-Molybdenum Steel , ER90S-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 3/4 Inch [19 Mm] Thick, PWHT Condition, Primarily Pipe Applications. American Welding Society, 2022.
Znajdź pełny tekst źródłaAmerican Welding Society. AWS B2.1-5A-223 : 2022, Standard Welding Procedure Specification for Shielded Metal Arc Welding of Chromium-Molybdenum Steel , E9018-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [13 Mm] Through 1-1/2 Inch [38 Mm] Thick, PWHT Condition, Primarily Pipe Application : AWS B2.1-5A-223: 2022, Standard Welding Procedure Specification for Shielded Metal Arc Welding of Chromium-Molybdenum Steel , E9018-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [13 Mm] Through 1-1/2 Inch [38 Mm] Thick, PWHT Condition, Primarily Pipe Application. American Welding Society, 2022.
Znajdź pełny tekst źródłaAmerican Welding Society. Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel , ER90S-B3 and E9018-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 1-1/2 Inch [38 Mm] Thick, PWHT Condition, Primarily Pipe Applications: Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel , ER90S-B3 and E9018-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 1-1/2 Inch [38 Mm] Thick, PWHT Condition, Primarily Pipe Applications. American Welding Society, 2022.
Znajdź pełny tekst źródłaAmerican Welding Society. AWS B2.1-5A-226 : 2022, Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium- Molybdenum Steel , IN521, ER90S-B3, and E9018-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 1-1/2 Inch [38 Mm] Thick, PWHT Condition, Primarily Pipe Applications : AWS B2.1-5A-226: 2022, Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium- Molybdenum Steel , IN521, ER90S-B3, and E9018-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 1-1/2 Inch [38 Mm] Thick, PWHT Condition, Primarily Pipe Applications. American Welding Society, 2022.
Znajdź pełny tekst źródłaAmerican Welding Society. AWS B2.1-5A-224 : 2022, Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel , ER90S-B3 and E9018-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 1-1/2 Inch [38 Mm] Thick, PWHT Condition, Primarily Pipe Applications : AWS B2.1-5A-224: 2022, Standard Welding Procedure Specification for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel , ER90S-B3 and E9018-B3, 1/8 Inch [3 Mm] Through 1/2 Inch [13 Mm] Thick, As-Welded Condition; 1/8 Inch [3 Mm] Through 1-1/2 Inch [38 Mm] Thick, PWHT Condition, Primarily Pipe Applications. American Welding Society, 2022.
Znajdź pełny tekst źródłaCzęści książek na temat "Chromium-molybdenum steel"
Nomura, Kyosuke, Naoki Tonooka, Yoshinobu Shimamura, Hitoshi Ishii, Tomoyuki Fujii i Keiichiro Tohgo. "Effect of Variable Loading on Very High Cycle Fretting Fatigue of Chromium-Molybdenum Steel". W Springer Proceedings in Physics, 143–49. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-2294-9_13.
Pełny tekst źródłaSulowski, Maciej, Andrzej Cias, Marin Stoytchev i Tchavdar Andreev. "The Effect of Chemical Composition of Sintering Atmosphere on the Structure and Mechanical Properties of PM Manganese Steels with Chromium and Molybdenum Additions". W Progress in Powder Metallurgy, 753–56. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.753.
Pełny tekst źródła"Corrosion of Ferritic Stainless Steel Weldments". W Corrosion of Weldments, 77–97. ASM International, 2006. http://dx.doi.org/10.31399/asm.tb.cw.t51820077.
Pełny tekst źródła"12% chromium, molybdenum, vanadium creep-resisting steel". W The Alloy Tree. CRC Press, 2004. http://dx.doi.org/10.1201/9780203024010.ch7a.
Pełny tekst źródła"Modified 9% chromium, 1% molybdenum creep-resisting steel". W The Alloy Tree. CRC Press, 2004. http://dx.doi.org/10.1201/9780203024010.ch3a.
Pełny tekst źródła"Fatigue Fracture of a Cast Chromium-Molybdenum Steel Pinion". W ASM Failure Analysis Case Histories: Steelmaking and Thermal Processing Equipment. ASM International, 2019. http://dx.doi.org/10.31399/asm.fach.steel.c0047406.
Pełny tekst źródła"17% chromium, 12% nickel, 2.5% molybdenum austenitic stainless steel". W The Alloy Tree. CRC Press, 2004. http://dx.doi.org/10.1201/9780203024010.ch3e.
Pełny tekst źródła"19% chromium, 13% nickel, 3.5% molybdenum, austenitic stainless steel". W The Alloy Tree. CRC Press, 2004. http://dx.doi.org/10.1201/9780203024010.chf0.
Pełny tekst źródła"Rupture of Chromium-Molybdenum Steel Superheater Tubes Because of Overheating". W ASM Failure Analysis Case Histories: Failure Modes and Mechanisms. ASM International, 2019. http://dx.doi.org/10.31399/asm.fach.modes.c0048294.
Pełny tekst źródła"Leaky Heating Coils of an Austenitic Chromium-Nickel-Molybdenum Steel". W ASM Failure Analysis Case Histories: Failure Modes and Mechanisms. ASM International, 2019. http://dx.doi.org/10.31399/asm.fach.modes.c9001177.
Pełny tekst źródłaStreszczenia konferencji na temat "Chromium-molybdenum steel"
Paris, Anthony, Alex Bergeron, Matthew Cullin i Andres Munk. "Fatigue Behavior of Stainless Steel, Titanium, and Cobalt Chromium Molybdenum Spinal Rods". W ASME 2010 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2010. http://dx.doi.org/10.1115/sbc2010-19720.
Pełny tekst źródłaAgafii, V., J. Padgurskas, V. Mihailov, A. Andriušis, R. Kreivaitis i A. Ianachevici. "Increasing Wear Resistance of 30x13 Stianless Steel by Electrospark Alloying". W BALTTRIB 2015. Aleksandras Stulginskis University, 2015. http://dx.doi.org/10.15544/balttrib.2015.14.
Pełny tekst źródłaOtt, George A., i Carlos Morone. "THE PHYSICAL METALLURGY OF 4% CHROMIUM MOLYBDENUM FORGED STEEL COLD MILL WORK ROLLS". W 49º Seminário de Laminação. São Paulo: Editora Blucher, 2012. http://dx.doi.org/10.5151/2594-5297-22735.
Pełny tekst źródłaFurukawa, Tomohiro, Eiichi Yoshida i Kazumi Aoto. "Corrosion Behavior of Steels in Lead-Bismuth Eutectic: In Stagnant LBE Test at Low Oxygen Partial Pressure". W 12th International Conference on Nuclear Engineering. ASMEDC, 2004. http://dx.doi.org/10.1115/icone12-49061.
Pełny tekst źródłaWada, Tadahiro. "Tool wear of aluminum/chromium/tungsten/silicon-based-coated solid carbide thread milling cutters in thread tapping of chromium-molybdenum steel". W 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, 2016. http://dx.doi.org/10.1109/icmae.2016.7549538.
Pełny tekst źródłaPeangchit, Phacharadit, i Charnnarong Saikaew. "Influences of Cutting Speed on Surface Roughness during Machining of Chromium Molybdenum Steel with Ceramic Insert Cutting Tool". W 2017 International Symposium on Computer Science and Intelligent Controls (ISCSIC). IEEE, 2017. http://dx.doi.org/10.1109/iscsic.2017.30.
Pełny tekst źródłaMohr, A., O. Schwabe, K. Ernst, H. Hill i P. Kluge. "Thermal Spraying of a Novel Nickel-Free High Strength and Corrosion Resistant Austenitic Steel". W ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0631.
Pełny tekst źródłaEra, H., K. Hashimoto, N. Sakoda, Z. Zeng i S. Sako. "Improvement of Corrosion Resistance of Thermal-Sprayed Stainless Steel Coating by Addition of Some Deoxidizing Elements". W ITSC2015, redaktorzy A. Agarwal, G. Bolelli, A. Concustell, Y. C. Lau, A. McDonald, F. L. Toma, E. Turunen i C. A. Widener. ASM International, 2015. http://dx.doi.org/10.31399/asm.cp.itsc2015p0467.
Pełny tekst źródłaHankui, Wang, Xu Tong i Shou Binan. "A Method to Evaluate the Temper Embrittlement From Step Cooling Test". W ASME 2014 Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/etam2014-1015.
Pełny tekst źródłaVenkatesh, Anand, i Ajit K. Roy. "The Evaluation of the Cracking Susceptibility of Alloy 718 in an Acidic Solution". W ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/pvp2007-26493.
Pełny tekst źródła