Gotowa bibliografia na temat „Chemical upcycling of polyethylene”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Chemical upcycling of polyethylene”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Chemical upcycling of polyethylene"
Xu, Zhen, Nuwayo Eric Munyaneza, Qikun Zhang, Mengqi Sun, Carlos Posada, Paul Venturo, Nicholas A. Rorrer, Joel Miscall, Bobby G. Sumpter i Guoliang Liu. "Chemical upcycling of polyethylene, polypropylene, and mixtures to high-value surfactants". Science 381, nr 6658 (11.08.2023): 666–71. http://dx.doi.org/10.1126/science.adh0993.
Pełny tekst źródłaYang, Weina. "Chemical upcycling of PET: a mini-review of converting PET into value-added molecules". Applied and Computational Engineering 7, nr 1 (21.07.2023): 246–50. http://dx.doi.org/10.54254/2755-2721/7/20230462.
Pełny tekst źródłaZeng, Manhao, Yu-Hsuan Lee, Garrett Strong, Anne M. LaPointe, Andrew L. Kocen, Zhiqiang Qu, Geoffrey W. Coates, Susannah L. Scott i Mahdi M. Abu-Omar. "Chemical Upcycling of Polyethylene to Value-Added α,ω-Divinyl-Functionalized Oligomers". ACS Sustainable Chemistry & Engineering 9, nr 41 (4.10.2021): 13926–36. http://dx.doi.org/10.1021/acssuschemeng.1c05272.
Pełny tekst źródłaZhang, Fan, Manhao Zeng, Ryan D. Yappert, Jiakai Sun, Yu-Hsuan Lee, Anne M. LaPointe, Baron Peters, Mahdi M. Abu-Omar i Susannah L. Scott. "Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization". Science 370, nr 6515 (22.10.2020): 437–41. http://dx.doi.org/10.1126/science.abc5441.
Pełny tekst źródłaAumnate, Chuanchom, Natalie Rudolph i Majid Sarmadi. "Recycling of Polypropylene/Polyethylene Blends: Effect of Chain Structure on the Crystallization Behaviors". Polymers 11, nr 9 (6.09.2019): 1456. http://dx.doi.org/10.3390/polym11091456.
Pełny tekst źródłaZhang, Xiaoxia, Shaodan Xu, Junhong Tang, Li Fu i Hassan Karimi-Maleh. "Sustainably Recycling and Upcycling of Single-Use Plastic Wastes through Heterogeneous Catalysis". Catalysts 12, nr 8 (26.07.2022): 818. http://dx.doi.org/10.3390/catal12080818.
Pełny tekst źródłaHaque, Zenifar G., Jessica Ortega Ramos i Gerardine G. Botte. "(General Student Poster Award Winner - 2nd Place) Electrochemical Routes for Polymer Upcycling". ECS Meeting Abstracts MA2023-01, nr 55 (28.08.2023): 2682. http://dx.doi.org/10.1149/ma2023-01552682mtgabs.
Pełny tekst źródłaAlali, Sabah A. S., Meshal K. M. B. J. Aldaihani i Khaled M. Alanezi. "Plant Design for the Conversion of Plastic Waste into Valuable Chemicals (Alkyl Aromatics)". Applied Sciences 13, nr 16 (14.08.2023): 9221. http://dx.doi.org/10.3390/app13169221.
Pełny tekst źródłaOtaibi, Ahmed A. Al, Abdulmohsen Khalaf Dhahi Alsukaibi, Md Ataur Rahman, Md Mushtaque i Ashanul Haque. "From Waste to Schiff Base: Upcycling of Aminolysed Poly(ethylene terephthalate) Product". Polymers 14, nr 9 (2.05.2022): 1861. http://dx.doi.org/10.3390/polym14091861.
Pełny tekst źródłaSoong, Ya-Hue Valerie, Margaret J. Sobkowicz i Dongming Xie. "Recent Advances in Biological Recycling of Polyethylene Terephthalate (PET) Plastic Wastes". Bioengineering 9, nr 3 (27.02.2022): 98. http://dx.doi.org/10.3390/bioengineering9030098.
Pełny tekst źródłaRozprawy doktorskie na temat "Chemical upcycling of polyethylene"
Idris, Adamu Aminu. "Upcycling of polyethylenes by catalysis". Electronic Thesis or Diss., Lyon 1, 2023. https://n2t.net/ark:/47881/m6fx79jm.
Pełny tekst źródłaThe synthesis of functional telechelic oligomer/molecule platforms directly from polyethylene (PE) wastes, although very appealing from an environmental and economic point of view, remains today a major problem to tackle. Indeed, the strong C(Sp3) – C(Sp3) & C(Sp3) – H(Sp3) σ-covalent bonds of polyethylenes are undoubtedly not only at the origin of the robustness and chemical inertness of PEs relative to many reagents but also dramatically hamper their chemical recycling. Among the different chemical methods currently available for the treatment of polyolefin wastes, one can cite pyrolysis, thermal cracking, and/or catalytic hydrocracking. However, such approaches most often lead to mixtures of hydrocarbons in a non-selective manner, which are difficult to valorize. In this dissertation thesis, we seek to develop a more valuable route toward polyolefins circularity through polyethylenes upcycling into α,ω–divinyl, or diacetate oligomers. Our strategy involves a two-step process via first the creation of reactive internal alkenes on the main polymer backbone by iridium-catalyzed dehydrogenation followed by depolymerization of the resulting unsaturated polymers using Ru–catalyzed metathesis. A thorough screening of the reaction parameters, nature of the catalyst, and substrate scope was first undertaken for both reactions. We have shown that different levels of internal unsaturation can be generated on the PEs backbone by playing with the catalyst ligand, loading, or conditions of dehydrogenation without compromising its structural and thermal properties Subsequent cross-metathesis of these internally unsaturated polyethylenes with ethylene and cis–1,4–diacetoxy–2–butene as chain transfer agents afforded divinyl and diester telechelic products with 86 % and 91 % conversions (of internal double bonds into functional chain ends) respectively. The high-value-added end-products of this two-step process could be used as feed for the synthesis of recycle-by-design polymers, thereby reducing the exploitation of fossils for polymer production and its associated environmental impact
Chohan, Sukhvinder K. "Environmental degradation of polyethylene-based plastics". Thesis, Aston University, 1996. http://publications.aston.ac.uk/9675/.
Pełny tekst źródłaMüller, Stefan 1971. "Biodegradation of polyethylene thermolysis residue". Thesis, McGill University, 1998. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=20509.
Pełny tekst źródłaIt was also found that the acclimation of the microorganism to the substrate was an important factor in the degradation of the residue. Using two different acclimation times, two different strains of R. rhodochrous were selected for in the acclimation step. The two different strains showed very different degradation patterns of the polyethylene thermolysis residue. Strain A showed almost no effect of chain length on the degradation rate of the hydrocarbons while the degradation rate of the hydrocarbons for strain B decreased with increasing chain length. This difference in the degradation pattern was attributed to the varying amounts of enzymes present in each strain. Another factor found to affect the degradation pattern was the liquidity of the polyethylene thermolysis residue.
Tang, Zuojian 1967. "Surface morphology of polyethylene blown films". Thesis, McGill University, 2000. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=31072.
Pełny tekst źródłaMcCaffrey, William Chessleigh. "Thermolysis of polyethylene and polyethylenepolystyrene mixtures". Thesis, McGill University, 1996. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=40397.
Pełny tekst źródłaBrues, Michael J. (Michael Jason). "Thermolysis of mixtures of polyethylene and polystyrene". Thesis, McGill University, 1994. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=22642.
Pełny tekst źródłaDifferent reaction conditions were examined. It was determined that using a single reaction temperature (445$ sp circ$C) was as effective at separating the aromatic and aliphatic products as using two different reaction temperatures.
Polystyrene was found to catalyze the thermolysis of polyethylene. Conventional catalysts (Mordenite and FCC zeolite) affected the overall production and product distributions for mixtures and polyethylene, while only changing the product distribution for polystyrene. Hydrogen in the purge gas only slightly decreased the ratio of 1-alkenes to n-alkanes.
Recycled plastics yielded results similar to virgin polymers, although overall liquid production was decreased (probably due to the additives present in the plastics).
Lageraaen, Paul R. (Paul Robert). "Thermolysis of mixtures of polyethylene and polystyrene". Thesis, McGill University, 1993. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=56791.
Pełny tekst źródłaFeng, Lijun 1966. "Melting and crystallization behavior of linear low-density polyethylene". Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=86069.
Pełny tekst źródłaA generalized equation is introduced to clarify conceptual definitions of polymer melting temperatures. It incorporates the effects of comonomer volume, crystal length, folding surface free energy and enthalpy of fusion. It is successful in describing the characteristic melting temperatures of various alpha-alkene-ethylene copolymers. The proposed equation is used, along with melting traces obtained by differential scanning calorimetry (DSC), to estimate the crystal size number distributions. Furthermore, the melting temperature characteristics are identified, using crystal size number distributions.
The crystallization behavior of LLDPEs is studied by polarized light microscopy (PLM) and DSC. A modified Hoffman-Lauritzen (MHL) expression is proposed for the linear crystallization kinetics by replacing the equilibrium melting temperature, Tm0, with the melting temperature of the crystal stem with the maximum possible length, TmC,n*. The concept of the effective nucleation induction time is introduced, in order to employ the Avrami equation to analyze the overall crystallization kinetics during the initial crystallization stage.
The MHL analysis suggests the presence of three crystallization regimes: regimes III and II, and a special regime IM. The Avrami exponents are respectively 2, 1.5, and 1 in these regimes. The typical optical morphology of LLDPEs is spherulitic. As the crystallization temperature increases, the morphology changes from spherulites without ring bands, to ring-banded spherulites and sometimes to irregular structure with rough ring bands. These structural characteristics seem to correspond to MHL regimes.
Non-linear spherulitic growth behavior is observed in regimes II and IM. This behavior is explained by the reduction of the concentration of crystallizable ethylene sequences in the melt phase. The MHL expression may be still used to analyze non-linear growth crystallization kinetics by employing a variable TmC,n*.
Williams, Gregory R. (Gregory Richard). "Catalyzed thermal oxidation to recover value from waste polyethylene". Thesis, McGill University, 1991. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=60482.
Pełny tekst źródłaIt was concluded that volatilization became a dominant factor and oxygen containing molecules were lost from the solid. Some of the samples were used as the sole carbon source in fermentations with Yarrowia lipolytica and Arthrobacter paraffineus, but no growth was achieved.
Abdallah, Mohammad Raji AlGhazi. "Role of polymer entanglements in polyethylene oxide induced fines flocculation". Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=38140.
Pełny tekst źródłaIn this work, a new model was derived in which all possible interactions were considered and assumed to follow Langmuir kinetics. Since fines are the main component in the headbox of mechanical grade furnishes, fines homo- and heteroflocculation with a PEO/CF retention aid were investigated in a circulating flow loop, and found to follow Langmuir kinetics. The small amount of fines deposited on the fibers was attributed to the large detachment rate in turbulent shear. The apparent difference in the deposition time and the half time of flocculation was attributed to difference in efficiency. Fines homoflocculation showed that fines are flocculated (without a retention aid) to various extents depending on shear, and that aggregates of flocs will form when a retention aid is added.
The PEO/CF flocculation efficiency was found to be a function of various parameters, i.e., aging of PEO solution, stirring intensity and time of stirring during dissolution, concentration at storage, shearing and dilution prior to injection. Optimum conditions were found for most parameters, and a critical shear intensity was determined. This PEO behavior was attributed to the extent of entanglements of PEO coils, which can be characterized prior to its addition to the flocculation vessel by a newly developed method. In this method, the pressure drop of a PEO solution passing through a capillary constriction was measured and correlated with its flocculation efficiency. Using the derived correlation, the flocculation efficiency can be estimated, and the relevant parameters can be controlled. Moreover, the salt effect on a PEO/CF system in a pulp was investigated. Salt was found to react with a CF causing a decrease in the flocculation efficiency. The effect of this reaction can be eliminated if PEO is added directly after CF addition.
Książki na temat "Chemical upcycling of polyethylene"
Zollo, Tancredi. The Canadian polyethylene industry. Ottawa: Conference Board of Canada, 1985.
Znajdź pełny tekst źródłaZollo, Tancredi. The Canadian polyethylene industry. Ottawa: The Conference Board of Canada, 1985.
Znajdź pełny tekst źródłaIntroduction to industrial polyethylene: Properties, catalysts, processes. Salem, Mass: Scrivener, 2010.
Znajdź pełny tekst źródłaPaabo, Maya. A literature review of the chemical nature and toxicity of the decomposition products of polyethylenes. Gaithersburg, MD: U.S. Dept. of Commerce, National Bureau of Standards, 1986.
Znajdź pełny tekst źródłaPolyethylene-based blends, composites and nanocomposities. Hoboken, New Jersey: Wiley, 2015.
Znajdź pełny tekst źródłaDietrich, Andrea M. Chemical Permeation/Desorption in New and Chlorine-Aged Polyethylene Pipes. Denver, CO: WATER RESEARCH FOUNDATION, 2010.
Znajdź pełny tekst źródłaNational Institute for Occupational Safety and Health., red. Exxon chemical company, pottsville film plant, polyethylene film department, Mar-lin, Pennsylvania. [Atlanta, Ga.?]: U.S. Dept. of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 1994.
Znajdź pełny tekst źródłaSchroder, L. J. Preparation of polyethylene sacks for collection of precipitation samples for chemical analysis. Lakewood, Colo: U.S. Dept. of the Interior, Geological Survey, 1985.
Znajdź pełny tekst źródłaSchroder, L. J. Preparation of polyethylene sacks for collection of precipitation samples for chemical analysis. Lakewood, Colo: U.S. Dept. of the Interior, Geological Survey, 1985.
Znajdź pełny tekst źródłaSchroder, L. J. Preparation of polyethylene sacks for collection of precipitation samples for chemical analysis. Lakewood, Colo: U.S. Dept. of the Interior, Geological Survey, 1985.
Znajdź pełny tekst źródłaCzęści książek na temat "Chemical upcycling of polyethylene"
Schroeck, Peter, Randy Minton, Theresa Healy i Larry Keefe. "Chemical Blowing Agents for Polyethylene". W Handbook of Industrial Polyethylene and Technology, 909–20. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119159797.ch34.
Pełny tekst źródłaLuo, Chuan, Shujun Dai, Fengping Ni, Chen Ruan, Haisong Ying i Lifeng Yuan. "Determination of content of recycled polyethylene and polyethylene terephthalate blends". W Advances in Energy, Environment and Chemical Engineering Volume 1, 395–400. London: CRC Press, 2022. http://dx.doi.org/10.1201/9781003330165-57.
Pełny tekst źródłaInada, Y., A. Matsushima, M. Hiroto, H. Nishimura i Y. Kodera. "Chemical modification of proteins with polyethylene glycols". W Microbial and Eznymatic Bioproducts, 129–50. Berlin, Heidelberg: Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/bfb0102318.
Pełny tekst źródłaTilger, B., i G. Luft. "Computer Model for Tubular High-Pressure Polyethylene Reactors". W Springer Series in Chemical Physics, 335–45. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-642-83224-6_27.
Pełny tekst źródłaKiparissides, Costas, i Harilaos Mavridis. "Mathematical Modelling and Sensitivity Analysis of High Pressure Polyethylene Reactors". W Chemical Reactor Design and Technology, 759–77. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4400-8_21.
Pełny tekst źródłaShilpa, Nitai Basak i Sumer Singh Meena. "Microbial Degradation of Conventional Polyethylene Waste: Current Status and Future Prospective". W Advances in Chemical, Bio and Environmental Engineering, 15–32. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-96554-9_2.
Pełny tekst źródłaCasiraghi, Antonella, Francesca Selmin, Paola Minghetti, Francesco Cilurzo i Luisa Montanari. "Nonionic Surfactants: Polyethylene Glycol (PEG) Ethers and Fatty Acid Esters as Penetration Enhancers". W Percutaneous Penetration Enhancers Chemical Methods in Penetration Enhancement, 251–71. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-47039-8_15.
Pełny tekst źródłaRehab-Bekkouche, Souheila, Nadjette Kiass i Kamel Chaoui. "Effects of Aggressive Chemical Environments on Mechanical Behavior of Polyethylene Piping Material". W Damage and Fracture Mechanics, 49–57. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-2669-9_6.
Pełny tekst źródłaTóth, A., I. Bertóti, M. Mohai i T. Ujvári. "Surface Modification of Polyethylene by Nitrogen PIII: Surface Chemical and Nanomechanical Properties". W Materials Science Forum, 255–62. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-426-x.255.
Pełny tekst źródłaBuccella, Giacomo, Davide Ceresoli, Andrea Villa, Luca Barbieri i Roberto Malgesini. "On the Triggering of Partial Discharges in Polyethylene: Chemical and Electronic Characterization". W Proceedings of the Sixth International Symposium on Dielectric Materials and Applications (ISyDMA’6), 129–37. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-11397-0_11.
Pełny tekst źródłaStreszczenia konferencji na temat "Chemical upcycling of polyethylene"
"Activation of polyethylene granules". W Chemical technology and engineering. Lviv Polytechnic National University, 2021. http://dx.doi.org/10.23939/cte2021.01.143.
Pełny tekst źródłaJeong, Woochang, Chanhee You, Thai Ngan Do, Minseong Park, Hegwon Chung, Jonghwan Oh i Jiyong Kim. "Superstructure optimization framework for upcycling of the plastic wastes in a circular economy". W 15th Mediterranean Congress of Chemical Engineering (MeCCE-15). Grupo Pacífico, 2023. http://dx.doi.org/10.48158/mecce-15.t3-p-12.
Pełny tekst źródła"Polyethylene Packages and Polyethylene Terephthalate Bottles - a Source of Precursors for Chemical Syntheses". W 2023 4th International Scientific Conference "Chemical Technology and Engineering". Lviv Polytechnic National University, 2023. http://dx.doi.org/10.23939/cte2023.229.
Pełny tekst źródłaMvango, Sindisiwe, Nompumelelo Mthimkhulu, Pascaline N. Fru, Lynne A. Pilcher i Mohammed O. Balogun. "Physico-chemical characterization of polyethylene glycol-conjugated betulinic acid". W FRACTURE AND DAMAGE MECHANICS: Theory, Simulation and Experiment. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0028479.
Pełny tekst źródłaHaryanto, Dewi Hardiningrum F. i Deni Swantomo. "Modification of polyethylene oxide-polyethylene glycol dimethacrylate hydrogel film by the addition of Jatropha multifida sap for wound dressing application". W THE 11TH REGIONAL CONFERENCE ON CHEMICAL ENGINEERING (RCChE 2018). Author(s), 2019. http://dx.doi.org/10.1063/1.5095039.
Pełny tekst źródłaMoravskyi, Volodymyr, Anastasiya Kucherenko, Marta Kuznetsova i Ludmila Dulebova. "The metallized polyethylene granules as the basis for creating of thermal energy storage system". W Chemical technology and engineering. Lviv Polytechnic National University, 2019. http://dx.doi.org/10.23939/cte2019.01.180.
Pełny tekst źródłaPantyukhov, Petr, Tatiana Monakhova, Anatoly Popov i Anna Zykova. "Chemical interaction of polyethylene matrix with vegetable fillers in biocomposites". W VIII INTERNATIONAL CONFERENCE ON “TIMES OF POLYMERS AND COMPOSITES”: From Aerospace to Nanotechnology. Author(s), 2016. http://dx.doi.org/10.1063/1.4949697.
Pełny tekst źródła"Heat Storage System Based on Copper-Coates Granules of Polyethylene". W 2023 4th International Scientific Conference "Chemical Technology and Engineering". Lviv Polytechnic National University, 2023. http://dx.doi.org/10.23939/cte2023.139.
Pełny tekst źródłaAhad, Inam Ul, Ahmar Murtaza, Sithara Sreenilayam, Bogusław Budner, Andrzej Bartnik, Henryk Fiedorowicz, Aqeel-ur-Rehman i Dermot Brabazon. "Chemical surface modification of polyethylene terephthalate (PET) films using extreme ultraviolet". W INTERNATIONAL CONFERENCE ON KEY ENABLING TECHNOLOGIES (KEYTECH 2019). AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5123709.
Pełny tekst źródłaAlzuhairi, Mohammed. "Bubble column and CFD simulation for chemical recycling of polyethylene terephthalate". W TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES18. Author(s), 2018. http://dx.doi.org/10.1063/1.5039228.
Pełny tekst źródłaRaporty organizacyjne na temat "Chemical upcycling of polyethylene"
Cesar A. Ramirez-Sarmiento, Cesar A. Ramirez-Sarmiento. Efficient biological upcycling of polyethylene terephthalate (PET) into high-value compounds. Experiment, październik 2023. http://dx.doi.org/10.18258/57487.
Pełny tekst źródłaCallahan, Clare, Emily Larson, Clint Noack i Justin Adder. Upcycling Associated Natural Gas into Liquid Chemical Intermediates. Office of Scientific and Technical Information (OSTI), sierpień 2022. http://dx.doi.org/10.2172/1882393.
Pełny tekst źródłaBritt, Phillip F., Geoffrey W. Coates, Karen I. Winey, Jeffrey Byers, Eugene Chen, Bryan Coughlin, Christopher Ellison i in. Report of the Basic Energy Sciences Roundtable on Chemical Upcycling of Polymers. Office of Scientific and Technical Information (OSTI), kwiecień 2019. http://dx.doi.org/10.2172/1616517.
Pełny tekst źródłaVeith, E. M. ,. Westinghouse Hanford. LLCE burial container high density polyethylene chemical compatibility. Office of Scientific and Technical Information (OSTI), sierpień 1996. http://dx.doi.org/10.2172/657480.
Pełny tekst źródłaShuely, Wendel, Patricia Boone, Juan Cajigas i Michael Sheely. Methodology for Long-Term Permeation Test Periods for HD in High-Density Polyethylene: Universal Munitions Storage Container for the Non-Stockpile Chemical Materiel Program. Fort Belvoir, VA: Defense Technical Information Center, maj 2016. http://dx.doi.org/10.21236/ad1009746.
Pełny tekst źródłaRuschau. L51887 Compatibility of Repair Coatings Applied to Existing Below Grade Coatings. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), kwiecień 2002. http://dx.doi.org/10.55274/r0010209.
Pełny tekst źródłaRuschau. L51961 Coating Compatibility at Thermite Welds and Keyhole Excavations. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), grudzień 2002. http://dx.doi.org/10.55274/r0010247.
Pełny tekst źródłaLandau, Sergei Yan, John W. Walker, Avi Perevolotsky, Eugene D. Ungar, Butch Taylor i Daniel Waldron. Goats for maximal efficacy of brush control. United States Department of Agriculture, marzec 2008. http://dx.doi.org/10.32747/2008.7587731.bard.
Pełny tekst źródłaPreparation of polyethylene sacks for collection of precipitation samples for chemical analysis. US Geological Survey, 1985. http://dx.doi.org/10.3133/wri854067.
Pełny tekst źródłaHealth hazard evaluation report: HETA-92-0297-2396, Exxon Chemical Company, Pottsville Film Plant, Polyethylene Film Department, Mar-Lin, Pennsylvania. U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, luty 1994. http://dx.doi.org/10.26616/nioshheta9202972396.
Pełny tekst źródła