Gotowe bibliografie tematyczne / Chautauqua Assembly (N.Y.)

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Chautauqua Assembly (N.Y.)”

Autor: Grafiati

Data publikacji: 28 lipca 2024

Data aktualizacji: 30 lipca 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Chautauqua Assembly (N.Y.)”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Chautauqua Assembly (N.Y.)"

ANITA C. DANKER. "“Redeeming the Time”: Learning Vacations at the New England Chautauqua Assembly". Massachusetts Historical Review 17 (2015): 67. http://dx.doi.org/10.5224/masshistrevi.17.1.0067.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Dawe, Louise N., Konstantin V. Shuvaev i Laurence K. Thompson. "Magnetic [n×n] (n= 2−5) Grids by Directed Self-Assembly". Inorganic Chemistry 48, nr 8 (20.04.2009): 3323–41. http://dx.doi.org/10.1021/ic801078h.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ashton, Peter R., Douglas Philip, Neil Spencer i J. Fraser Stoddart. "The self-assembly of [n]pseudorotaxanes". Journal of the Chemical Society, Chemical Communications, nr 23 (1991): 1677. http://dx.doi.org/10.1039/c39910001677.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Xu, Wei, i Jian-Li Lin. "Dichloridobis(1,10-phenanthroline-κ2 N,N′)tungsten(II)". Acta Crystallographica Section E Structure Reports Online 63, nr 3 (28.02.2007): m859—m861. http://dx.doi.org/10.1107/s1600536807008148.

Pełny tekst źródła

Streszczenie:

In the title compound, [WCl2(C12H8N2)2], the W atom has a distorted six-coordinate octahedral geometry. There are some π–π stacking interactions in the structure, which are responsible for the supramolecular assembly.

Style APA, Harvard, Vancouver, ISO itp.

Singh, Pushpendra, Harkesh B. Singh i Ray J. Butcher. "{N 1-[2-(Butylselanyl)benzyl]-N 2,N 2-dimethylethane-1,2-diamine}dichloridomercury(II)". Acta Crystallographica Section E Crystallographic Communications 74, nr 8 (27.07.2018): 1151–54. http://dx.doi.org/10.1107/s2056989018010423.

Pełny tekst źródła

Streszczenie:

In the title compound, [HgCl2(C16H28N2Se)], the primary geometry around the Se and Hg atoms is distorted trigonal–pyramidal and distorted square-pyramidal, respectively. The distortion of the molecular geometry in the complex is caused by the steric demands of the ligands attached to the Se atom. The Hg atom is coordinated through two chloride anions, an N atom and an Se atom, making up an unusual HgNSeCl2 coordination sphere with an additional long Hg...N interaction. Intermolecular C—H...Cl interactions are the only identified intermolecular hydrogen-bonding interactions that seem to be responsible for the self assembly. These relatively weak C—H...Cl hydrogen bonds possess the required linearity and donor–acceptor distances. They act as molecular associative forces that result in a supramolecular assembly along the b-axis direction in the solid state of the title compound.

Style APA, Harvard, Vancouver, ISO itp.

Jia, Qianfa, i Jian Wang. "N-Heterocyclic Carbene-Catalyzed Convenient Benzonitrile Assembly". Organic Letters 18, nr 9 (15.04.2016): 2212–15. http://dx.doi.org/10.1021/acs.orglett.6b00844.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Kerékgyártó, János, László Kalmár, Zoltán Szurmai, Orsolya Hegyi i Gábor K. Tóth. "Synthesis of N-Glycopeptides by Convergent Assembly". International Journal of Peptide Research and Therapeutics 18, nr 1 (27.09.2011): 1–5. http://dx.doi.org/10.1007/s10989-011-9271-y.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

BELOHRADSKY, M., D. PHILP, F. M. RAYMO i J. F. STODDART. "ChemInform Abstract: Self-Assembly of (n)Rotaxanes". ChemInform 26, nr 43 (17.08.2010): no. http://dx.doi.org/10.1002/chin.199543297.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Lavine, M. S. "Nonequilibrium transient self-assembly". Science 349, nr 6252 (3.09.2015): 1066–68. http://dx.doi.org/10.1126/science.349.6252.1066-n.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zhou, Qi-hua, Zhi-yun Li, Hua-qing Liang, Yong-jiang Long, Qing Wu, Hai-yang Gao, Guo-dong Liang i Fang-ming Zhu. "Crystallization-driven self-assembly of isotactic polystyrene in N, N-dimethylformamide". Chinese Journal of Polymer Science 33, nr 4 (11.02.2015): 646–51. http://dx.doi.org/10.1007/s10118-015-1615-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Chautauqua Assembly (N.Y.)"

Wang, Wei. "Self-Assembly of Dendrimers and Cucurbit[n]uril Complexes". Scholarly Repository, 2008. http://scholarlyrepository.miami.edu/oa_dissertations/176.

Pełny tekst źródła

Streszczenie:

This dissertation investigates the preparation and electrochemical studies on a series of novel redox active hybrid dendrimers. The author also describes cucurbit[8]uril (CB8) mediated dendrimer self-assembly and their size selection by applying external electrochemical stimulus. In addition to this, a series of redox active, carboxylic acid terminated dendrimers were deposited onto indium tin oxide (ITO) surfaces. The surface interactions between the dendrimers and the metal oxides were characterized by electrochemical, spectroscopic, and atomic force microscopic methods. Additionally, the author describes molecular recognition behavior studies between several redox active guests and cucurbit[7]uril (CB7) in non-aqueous media. Furthermore, the author also describes the preparation and electronic communication studies on a series of bisferrocenylamino triazine derivatives. Three chapters of this dissertation deal with dendrimer applications in several different topics. A general introduction to dendrimers is given in Chapter I, including a short history, dendrimer structural features, synthetic methodologies, and also including their general applications on several different topics. Chapter II describes the preparation and characterization of a series of novel redox active hybrid dendrimers. These dendrimers consist of a ferrocenylamino nucleus and two series of popular dendrons (Fréchet and Newkome type). Interestingly, the microenvironment surrounding the redox residues is finely adjustable by varying the size of these two types of dendrons. Chapter III describes the molecular recognition studies with selected redox active guests and the macrocyclic host CB7 in non-aqueous media. The extremely strong host-guest interaction between CB7 and ferrocenylmethyl-trimethylammonium (FA) in aqueous media experiences a substantial thermodynamic stability loss when transferred to non-aqueous media. In stark contrast to this, the binding behavior between CB7 and the dicationic guest methyl viologen (MV) exhibits less sensitivity to environmental variation. Furthermore, the electrochemical studies were performed under non-aqueous media. In general, host CB7 encapsulation of these redox active guests in non-aqueous media induces different electrochemical behavior compared to that of aqueous media. For instance, the cyclic voltammetric response of CB7 encapsulated FA in DMSO exhibit substantial cathodic potential shift, which is opposite to the behavior in aqueous media. Chapter IV describes CB8 mediated dendrimer self-assembly. A new series of pi-donor containing Newkome type dendrimers were synthesized. These pi-donor containing dendrimers are found to form stable ternary charge transfer complexes with another series of pi-acceptor (viologen) containing dendrimers. Furthermore, one electron reduction of the viologen residue disrupts the charge transfer complexes and leads to the assembly of viologen radical cation dimmers. And, thus, may result in substantial size selection between these two types of dendrimer assemblies. Chapter V describes the exploration of a series of redox active dendrimers bearing multiple carboxylic acids as surface anchoring groups to attach onto the optical transparent semiconductor material ITO coated glass surfaces. The dendrimer derivatized ITO slides were further prepared as working electrodes, and the subsequent electrochemical studies revealed that these dendrimers strongly adsorb onto ITO surfaces. Especially, the ITO electrodes treated with the second generation dendrimer exhibit rather stable electrochemical behavior. The surface coverages of ITO electrodes treated with dendrimers were estimated by current integration. Atomic force microscopic studies provided insights on surface topographical variation before and after the dendrimer deposition. Infrared spectroscopic studies further revealed the chemical interactions between dendrimer carboxylic acid groups and the metal oxide surfaces. Chapter VI describes the preparation of a series of triazine based bisferrocenylamino derivatives. Variable 1H-NMR and 13C-NMR spectroscopic studies clearly indicate that these bisferrocenylamino triazine derivatives exhibit rotamerization phenomena. And, the rotamer coalescence temperatures are mediated by the third substituent group. The X-ray crystallographic analyses disclose the partial double bond character between the amino nitrogen and the triazine carbon, which reveal the structural proof behind the rotamerization phenomena. Furthermore, electrochemical experiments are performed under two sets of experimental conditions. No electronic communication is observed when using the traditional tetrabultylammonium hexafluorophosphate (TBAPF6) as supporting electrolyte. In stark contrast to this, electronic communication between the bisferrocenyl residues is observed when using tetrabultylammonium tetrakis(pentafluorophenyl)borate (TBAB(C6F5)4) as supporting electrolyte. Surprisingly, the electronic communication strength can be mediated by a third substituent group. Computational studies provide insights into the molecular geometry and electronic structure of the mixed valence species. By combining the supporting electrolyte dependant electronic communication behavior, near-IR spectroscopic studies and the computational results, we conclude that, the electronic communication between the bisferrocenyl residues in these investigated triazine derivatives occurs through space metal-metal interactions.

Style APA, Harvard, Vancouver, ISO itp.

Serpe, Michael Joseph. "Self-Assembly of Poly(N-isopropylacrylamide) Microgel Thin Films". Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/4806.

Pełny tekst źródła

Streszczenie:

The assembly of poly(N-isopropylacrylamide-co-acrylic acid) (pNIPAm-co-AAc) microgel thin films into disordered and ordered arrays was investigated. Disordered pNIPAm-co-AAc microgel arrays were assembled based on electrostatic attractions between polyanionic pNIPAm-co-AAc microgels and polycationic poly(allylamine hydrochloride) (PAH). These interactions were studied in solution and subsequently used to assemble thin films following a Layer-by-Layer assembly protocol. Thin films were assembled as a function of pNIPAm-co-AAc microgel solution temperature and the resultant film thermoresponsivity characterized as a function of microgel layer number and pH. The response of assembled thin films to pH 3.0 and 6.5 exposure was then characterized by quartz crystal impedance and surface plasmon resonance spectroscopy, which showed that the thin film solvation was highly dependent on the pH of the solution it was in. Assembled thin films were also shown to be useful as controlled drug delivery platforms, where it was found that small molecules could be released from the films in a temperature regulated fashion. Microgel thin films also exhibited unique optical properties and were used as microlens arrays, which were able to focus pattern in air as well as in solution and had focal lengths that could be tuned in response to pH and temperature changes. Ordered microgel arrays were assembled following a thermal annealing process, in order to make light diffracting materials. These ordered arrays were photopolymerized and exhibited temperature dependent Bragg diffraction properties.

Style APA, Harvard, Vancouver, ISO itp.

Koh, Ming Liang. "Self assembly of (N-methylated cyclic peptide)-polymer conjugates". Thesis, The University of Sydney, 2013. http://hdl.handle.net/2123/10129.

Pełny tekst źródła

Streszczenie:

Posed with the challenge of engineering and characterising nanoscaled objects, this thesis reports on the development of self assembling (cyclic peptide)-polymer conjugates as a versatile supramolecular route to complex nanostructures. A variety of conjugates was synthesised by microwave assisted copper(i)-catalysed azide-alkyne cycloaddition, covalently coupling alt(d,l) α cyclic peptides with synthetic polymers. The product of self assembly was then characterised in solution by small angle neutron scattering. Manipulating the grafted polymer and the chemical functionality of the peptide influenced the stability of the assembly, but was observed to be dependent on the solvating media. H-bonding and solvation strengths of a variety of solvents and mixtures produced nanotubes with lengths >110 nm or as short as 10 nm. Partially N methylated cyclic peptides (NMeCPs) and NMeCP-polymer conjugates were explored as compounds to limit self assembly. While the dimerisation of NMeCPs could be observed by size exclusion chromatography, lateral aggregation was also observed. NMeCP-polymer conjugates formed large (~400 nm) extended structures with small (~1 nm) domains as characterised by differential scanning calorimetry, light and neutron scattering. Monotopic NMeCP species were then investigated as chain stoppers for nanotubes, with the intent of controlling the nanotube length and adding functionality to the tube ends. No change to the geometry of the assembly could be observed, even up to a molar ratio of 1:4 ([CP]/[NMeCP], 80 % NMeCP). To gain insight into this discrepancy, a thermodynamic model was developed to describe the bicomponent system. It is put forward that the decreased availability of NMeCP in monomeric form, due to the lateral aggregation of NMeCP species, could explain the observed inefficiencies in chain stopping.

Style APA, Harvard, Vancouver, ISO itp.

Riddle, Justin. "Assembly of tris(N-salicylideneamine) molecular architectures steric and electronic control of assembly, transport, and luminescence /". [Bloomington, Ind.] : Indiana University, 2009. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3380124.

Pełny tekst źródła

Streszczenie:

Thesis (Ph.D.)--Indiana University, Dept. of Chemistry, 2009.
Title from PDF t.p. (viewed on Jul 20, 2010). Source: Dissertation Abstracts International, Volume: 70-12, Section: B, page: 7579. Adviser: Dongwhan Lee.

Style APA, Harvard, Vancouver, ISO itp.

Khanduja, Nimisha. "Processive Acceleration of Actin Barbed End Assembly by N-WASP". Diss., Virginia Tech, 2014. http://hdl.handle.net/10919/54933.

Pełny tekst źródła

Streszczenie:

Actin-based cell motility plays crucial roles throughout the lifetime of an organism. The dynamic rearrangement of the actin cytoskeleton triggers a plethora of cellular processes including cellular migration. Neural Wiskott Aldrich syndrome protein (N-WASP) is involved in transduction of signals from receptors on the cell surface to the actin cytoskeleton. N-WASP activated actin polymerization drives extension of invadopodia and podosomes into the basement layer. In addition to activating Arp2/3 complex, N-WASP binds actin filament barbed ends, and both N-WASP and barbed ends are tightly clustered in these invasive structures. We used nanofibers coated with N-WASP WWCA domains as model cell surfaces and single actin filament imaging to determine how clustered N-WASP affects Arp2/3-independent barbed end assembly. Individual barbed ends captured by WWCA domains of N-WASP grew at or below their diffusion limited assembly rate. At high filament densities, overlapping filaments formed buckles between their nanofiber tethers and myosin attachment points. These buckles grew 3.4-fold faster than the diffusion-limited rate of unattached barbed ends. N-WASP constructs with and without the native poly-proline (PP) region showed similar rate enhancements. Increasing polycationic Mg2+ or Spermine to enhance filament bundling increased the frequency of filament buckle formation, consistent with a requirement of accelerated assembly on barbed end bundling. Our preliminary data shows that tethered N-WASP construct containing one WH2 domain does not generate processive bundles or filament loops leading us to believe that tandem WH2 is required for processivity. We propose that this novel N-WASP assembly activity provides an Arp2/3-independent force that drives nascent filament bundles into the basement layer during cell invasion. Discovery of this bundle mediated unique pathway involved in invasion and metastasis will provide new targets for therapeutic development.
Ph. D.

Style APA, Harvard, Vancouver, ISO itp.

Wu, Yuchao. "Cucurbit[n]uril-based colloidal self-assembly in hybrid polymeric systems". Thesis, University of Cambridge, 2017. https://www.repository.cam.ac.uk/handle/1810/270021.

Pełny tekst źródła

Streszczenie:

Supramolecular interactions are of great importance in the fabrication of new functional materials. In particular, colloidal assembly via supramolecular pathway has contributed to numerous innovations in material chemistry, on account of its specific, directional and dynamic non-covalent interactions. By taking advantage of the non-covalent supramolecular interactions, tailored complementary colloidal building blocks which are normally incompatible with each other could be integrated interdependently, forming novel hybrid materials with emerging properties. This thesis mainly focuses on the design, preparation and characterization of novel colloidal assemblies based on cucurbit[n]urils host-guest interactions, including hybrid ‘raspberry-like’ colloids, catalytic polymeric nanocomposites, advanced structured colloids, and supramolecular polymer colloidal hydrogel.

Style APA, Harvard, Vancouver, ISO itp.

Groombridge, Alexander S. "Aqueous self-assembly with cucurbit[n]urils : from solution to emulsion". Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/271800.

Pełny tekst źródła

Streszczenie:

Making use of the non-covalent bond to make materials is of great interest in many fields of research. This PhD thesis describes a variety of highly interdisciplinary research undertaken at the interface between chemistry, materials science, physics and engineering. Chapter 1 is an introductory chapter into the core concepts underlying this thesis. Supramolecular chemistry as a broad research field is briefly reviewed, followed by a focus on host-guest chemistry. The macrocyclic cucurbit[n]urils (CB[n]s) in particular are highlighted with a discussion on their recent applications since their discovery. Emulsions and their controlled generation with microfluidic techniques are then reviewed, as they have been used as templates for self-assembly processes throughout this thesis. A study into the synthesis of extended polymer networks composed entirely from small molecules held together by non-covalent interactions is described in Chapter 2. These highly dynamic and responsive supramolecular polymer networks have not yet been constructed with CB[n] host-guest chemistry. The ability of the larger CB[8] macrocycle to encapsulate multiple guest molecules in a stepwise fashion was taken advantage on in designing the synthesis of branching monomers. The monomers had two (A$_2$) or three (B$_3$) terminal guest moieties for CB[8], which upon combination formed branching supramolecular polymers that were multi-stimuli responsive. However, the polymers precipitated from solution at high concentrations rather than form a cross-linked network, due to competing intra-chain cyclisation and the limited water solubility of CB[8]. By confining these polymers to microfluidic droplets, directed assembly to the liquid-liquid interface could drive polymerisation to form an interfacial cross-linked gel that was both elastic and self-healing. Chapter 3 follows on from these results, describing attempts into constructing hyperbranched supramolecular polymers from an AB$_2$ guest molecule and CB[8] that would form globular polymers. Intramolecular complexation dominated with the guest molecules synthesised (A and B complexing within the molecule), evidenced by a variety of characterisation. Compared to previous works that relied on linear molecules to form a folded conformation for intramolecular complexes, these molecules were pre-organised with a unique cooperative complexation pathway. The stimuli-responsiveness of the complexes was probed, and the formation of self-sorting mixtures was demonstrated with multiple CB[n] and additional guest molecules. Controlling the self-assembly of semi-conducting nanocrystals with CB[7] is detailed in Chapter 4, a process that typically requires harsh conditions or extensive time-scales. Semi-conducting nanocrystals could be assembled instantaneously from water into extended networks that were highly porous with excess CB[7], retaining their nanoscale properties. Limiting quantities of CB[7] could then form nanoscale aggregates that remained in solution. Confinement of these assemblies within microfluidic droplets allowed the synthesis of dense microparticles, that retained their shape after re-dispersal in water. By simply including metallic nanocrystals as a minor component, mixed aggregates could be synthesised analogously. Finally, Chapter 5 draws overall conclusions from the results of this thesis, looking broadly at the potential for future prospects in these areas of research.

Style APA, Harvard, Vancouver, ISO itp.

Yang, Wenwen. "Synthesis of N-alkyl urea peptoid oligomers". University of Cincinnati / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1378197097.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sanchez, Daniel Antonio. "Amphiphilic Self-Assembly & Post-Polymerization of N-type Conjugated Optoelectronic Nanostructures". The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429039468.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Datar, Aniket. "AFM investigation of one-dimensional self-assembly of n-type organic semiconducting molecules /". Available to subscribers only, 2006. http://proquest.umi.com/pqdweb?did=1203563051&sid=13&Fmt=2&clientId=1509&RQT=309&VName=PQD.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Chautauqua Assembly (N.Y.)"

DuVernet, Sylvia. The Muskoka Assembly of the Canadian Chautauqua Institution: Points of view and personalities. [Ontario?]: Muskoka Graphics, 1985.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Organization for Security and Co-operation in Europe. Parliamentary Assembly, red. Vystuplenie Prezidenta N. A. na otkrytii 17-oĭ ezhegodnoĭ sessii Parlamentskoĭ Assamblei OBSE. [Astana: OSCE Parliamentary Assembly, 2008.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

1805-1868, Head Edmund Sir, i New Brunswick. Lieutenant Governor (1848-1854 : Head), red. Letter from the lieutenant governor of New Brunswick, to the commissioners under the Act of Assembly, 17th Victoria, relating to King's College, Fredericton. Fredericton, N.B: [s.n.], 1985.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Commission, New York (State) Legislature Administrative Regulations Review. Report on the validity of 16 NYCRR Part 815: A report to Assemblyman Eric N. Vitaliano, Assembly chairman, Administrative Regulations Review Commission. [Albany, N.Y.?]: New York State Assembly, Administrative Regulations Review Commission, 1991.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

(Firm), Aerojet, i United States. National Aeronautics and Space Administration., red. Integrated Advanced Microwave Sounding Unit-A (AMSU-A), performance verification report, METSAT Phase Locked Oscillator assembly, P/N 1348360-1, S/N's F07 and F08: Contract no. NAS 5-32314. [Washington, DC: National Aeronautics and Space Administration, 1998.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

MacNutt, James. Building for democracy: The history and architecture of the legislative buildings of Nova Scotia, Prince Edward Island and New Brunswick. Halifax: Formac Pub. Co., 2010.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Saint John Law Society (N.B.). Library., red. Act of incorporation, by-laws, and catalogue of library of the Saint John Law Society: Incorporated by act of Assembly of the province of New Brunswick passed 18th April 1878. [Saint John, N.B.?: s.n.], 1994.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

California. Legislature. Senate. Research Committee on Neighborhood Violence. Deterrence and response to neighborhood violence: Joint hearing transcript, Senate Research Committee on Neighborhood Violence and Assembly Select Committee on Neighborhood Violence & Mediation, Friday, November 20, 1987, Eastside Union High School District Board Room, 830 N. Capitol Avenue, San Jose, CA. Sacramento, CA (State Capitol, Box 942849, Sacramento 94249-0001): Joint Publications, 1987.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chautauqua Bells; a Reminiscence of Pleasant Visits to Chautauqua Lake, N. Y. Creative Media Partners, LLC, 2023.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Chautauqua Assembly (N.Y.)"

Gao, Rui Han, i Zhu Tao. "CB[n]-Based Coordination Chemistry". W Handbook of Macrocyclic Supramolecular Assembly, 695–730. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-2686-2_31.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gao, Rui Han, i Zhu Tao. "CB[n]-Based Coordination Chemistry". W Handbook of Macrocyclic Supramolecular Assembly, 1–36. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-1744-6_31-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ju, Yong, Yu-Fen Zhao i Yi Chen. "Self-assembly of N-phosphoamino acids". W Peptides, 17–19. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-010-9069-8_3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Li, Bin, Yiliang Wang i Chunju Li. "Biphen[n]arenes: Synthesis and Host–Guest Properties". W Handbook of Macrocyclic Supramolecular Assembly, 311–39. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-2686-2_13.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Li, Bin, Yiliang Wang i Chunju Li. "Biphen[n]arenes: Synthesis and Host–Guest Properties". W Handbook of Macrocyclic Supramolecular Assembly, 1–29. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-1744-6_13-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Liu, Yu, i Yi-Xuan Wang. "Selective Molecular Binding and Nanosupramolecular Assembly ofp-sulfonatocalix[n]arenes". W Non-covalent Interactions in the Synthesis and Design of New Compounds, 261–81. Hoboken, NJ: John Wiley & Sons, Inc, 2016. http://dx.doi.org/10.1002/9781119113874.ch15.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Shchukin, Evgenii R., i Alexei B. Nadykto. "Diffusive Vaporization and Growth of Assembly of N-Large Particles". W Mathematical Models of Non-Linear Excitations, Transfer, Dynamics, and Control in Condensed Systems and Other Media, 355–68. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-4799-0_29.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Jiang, Yongwen, i Dawei Ma. "Assembly of N-Containing Heterocycles via Pd- and Cu-Catalyzed C–N Bond Formation Reactions". W Amination and Formation of sp2 C-N Bonds, 87–118. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/3418_2013_61.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Pardasani, R. T., i P. Pardasani. "Magnetic properties of cyano-bridged gadolinium(III)-tungstate(V) bimetallic assembly with N,N-dimethylformamide". W Magnetic Properties of Paramagnetic Compounds, Magnetic Susceptibility Data, Volume 3, 908–11. Berlin, Heidelberg: Springer Berlin Heidelberg, 2021. http://dx.doi.org/10.1007/978-3-662-62470-8_386.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Fujimoto, Taisuke, Emi Yoshimoto i Masahiko Annaka. "Study on Self-Assembly of Telechelic Hydrophobically Modified Poly(N-isopropylacrylamide) in Water". W Gels: Structures, Properties, and Functions, 77–85. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-00865-8_11.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Chautauqua Assembly (N.Y.)"

Woody, David. "Configuration Design for Large N Arrays". W XXXVth URSI General Assembly and Scientific Symposium. Gent, Belgium: URSI – International Union of Radio Science, 2023. http://dx.doi.org/10.46620/ursigass.2023.2197.tvcx6506.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Schmidt, Jurgen, i M. Cortina Diaz. "FLOW BOILING HEAT TRANSFER OF n-HEXANE AND n-OCTANE IN A MINICHANNEL". W Annals of the Assembly for International Heat Transfer Conference 13. Begell House Inc., 2006. http://dx.doi.org/10.1615/ihtc13.p28.350.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Georgier, Georgi Nikolov, i Mariana Nikolova Georgiera-Grosse. "Theorem for the relation between the L1(c, n) and L2(c,ρ, n) numbers". W 2014 XXXIth URSI General Assembly and Scientific Symposium (URSI GASS). IEEE, 2014. http://dx.doi.org/10.1109/ursigass.2014.6929203.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zeng, Congwen, i Tianlong Gu. "A Novel Assembly Evolutionary Algorithm for n-Queens Problem". W 2007 International Conference on Computational Intelligence and Security Workshops (CISW 2007). IEEE, 2007. http://dx.doi.org/10.1109/cisw.2007.4425472.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zhang, Yunqiang, James Lee, Chock H. Gan, David Vigar i Ravi Sundaresan. "Analysis of N-channel transistor punch-through related to STI process". W International Symposium on Microelectronics and Assembly, redaktorzy H. Barry Harrison, Andrew T. S. Wee i Subhash Gupta. SPIE, 2000. http://dx.doi.org/10.1117/12.405372.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Teo, Y. L., Kin L. Pey, Wai K. Chim i Yung Fu Chong. "Implanted boron distribution in p+n structures using scanning capacitance microscopy". W International Symposium on Microelectronics and Assembly, redaktorzy H. Barry Harrison, Andrew T. S. Wee i Subhash Gupta. SPIE, 2000. http://dx.doi.org/10.1117/12.405388.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Jeon, Myoungwon, Andreas Pawlik, Thomas H. Greif, Simon Glover, Volker Bromm, Miloš Milosavljevic i Ralf S. Klessen. "The First Galaxies: Assembly with Black Hole Feedback". W Frank N. Bash Symposium 2011: New Horizons in Astronomy. Trieste, Italy: Sissa Medialab, 2012. http://dx.doi.org/10.22323/1.149.0026.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Humphrey, David, Grant Hampson, John Bunton, Giles Babich, Yuqing Chen, Chris Phillips, Xinping Deng i in. "Design of a Large-N Correlator for the SKA Low Telescope". W XXXVth URSI General Assembly and Scientific Symposium. Gent, Belgium: URSI – International Union of Radio Science, 2023. http://dx.doi.org/10.46620/ursigass.2023.2863.isdi2045.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chong, Yung Fu, Kin L. Pey, Andrew T. S. Wee, Alex K. See, C. H. Tung, R. Gopalakrishnan i Yongfeng Lu. "Application of excimer laser annealing in the formation of ultrashallow p+/n junctions". W International Symposium on Microelectronics and Assembly, redaktorzy H. Barry Harrison, Andrew T. S. Wee i Subhash Gupta. SPIE, 2000. http://dx.doi.org/10.1117/12.405380.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Weir, Natalee, Mark Wilson, Airan Yoets, Thomas Molina, Rebekah Bruce i Layne Carter. "Microbiological Characterization of the International Space Station Water Processor Assembly External Filter Assembly S/N 01". W 42nd International Conference on Environmental Systems. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2012. http://dx.doi.org/10.2514/6.2012-3595.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Chautauqua Assembly (N.Y.)"

J.W. Davis. WESTINGHOUSE 17X17 MOX PWR ASSEMBLY - WASTE PACKAGE CRITICALITY ANALYSIS (SCPB: N/A). Office of Scientific and Technical Information (OSTI), lipiec 1996. http://dx.doi.org/10.2172/862240.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Descalle, M., C. Clouse i J. Pruet. Monte Carlo and deterministic simulations of activation ratio experiments for 238U(n,f), 238U(n,g) and 238U(n,2n) in the Big Ten benchmark critical assembly. Office of Scientific and Technical Information (OSTI), lipiec 2009. http://dx.doi.org/10.2172/967294.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Feautrier, D., i D. L. Smith. Development and testing of a deuterium gas target assembly for neutron production via the H-2(d,n)He-3 reaction at a low-energy accelerator facility. Office of Scientific and Technical Information (OSTI), marzec 1992. http://dx.doi.org/10.2172/10171658.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Alchanatis, Victor, Stephen W. Searcy, Moshe Meron, W. Lee, G. Y. Li i A. Ben Porath. Prediction of Nitrogen Stress Using Reflectance Techniques. United States Department of Agriculture, listopad 2001. http://dx.doi.org/10.32747/2001.7580664.bard.

Pełny tekst źródła

Streszczenie:

Commercial agriculture has come under increasing pressure to reduce nitrogen fertilizer inputs in order to minimize potential nonpoint source pollution of ground and surface waters. This has resulted in increased interest in site specific fertilizer management. One way to solve pollution problems would be to determine crop nutrient needs in real time, using remote detection, and regulating fertilizer dispensed by an applicator. By detecting actual plant needs, only the additional nitrogen necessary to optimize production would be supplied. This research aimed to develop techniques for real time assessment of nitrogen status of corn using a mobile sensor with the potential to regulate nitrogen application based on data from that sensor. Specifically, the research first attempted to determine the system parameters necessary to optimize reflectance spectra of corn plants as a function of growth stage, chlorophyll and nitrogen status. In addition to that, an adaptable, multispectral sensor and the signal processing algorithm to provide real time, in-field assessment of corn nitrogen status was developed. Spectral characteristics of corn leaves reflectance were investigated in order to estimate the nitrogen status of the plants, using a commercial laboratory spectrometer. Statistical models relating leaf N and reflectance spectra were developed for both greenhouse and field plots. A basis was established for assessing nitrogen status using spectral reflectance from plant canopies. The combined effect of variety and N treatment was studied by measuring the reflectance of three varieties of different leaf characteristic color and five different N treatments. The variety effect on the reflectance at 552 nm was not significant (a = 0.01), while canonical discriminant analysis showed promising results for distinguishing different variety and N treatment, using spectral reflectance. Ambient illumination was found inappropriate for reliable, one-beam spectral reflectance measurement of the plants canopy due to the strong spectral lines of sunlight. Therefore, artificial light was consequently used. For in-field N status measurement, a dark chamber was constructed, to include the sensor, along with artificial illumination. Two different approaches were tested (i) use of spatially scattered artificial light, and (ii) use of collimated artificial light beam. It was found that the collimated beam along with a proper design of the sensor-beam geometry yielded the best results in terms of reducing the noise due to variable background, and maintaining the same distance from the sensor to the sample point of the canopy. A multispectral sensor assembly, based on a linear variable filter was designed, constructed and tested. The sensor assembly combined two sensors to cover the range of 400 to 1100 nm, a mounting frame, and a field data acquisition system. Using the mobile dark chamber and the developed sensor, as well as an off-the-shelf sensor, in- field nitrogen status of the plants canopy was measured. Statistical analysis of the acquired in-field data showed that the nitrogen status of the com leaves can be predicted with a SEP (Standard Error of Prediction) of 0.27%. The stage of maturity of the crop affected the relationship between the reflectance spectrum and the nitrogen status of the leaves. Specifically, the best prediction results were obtained when a separate model was used for each maturity stage. In-field assessment of the nitrogen status of corn leaves was successfully carried out by non contact measurement of the reflectance spectrum. This technology is now mature to be incorporated in field implements for on-line control of fertilizer application.

Style APA, Harvard, Vancouver, ISO itp.

Tan, Peng, i Nicholas Sitar. Parallel Level-Set DEM (LS-DEM) Development and Application to the Study of Deformation and Flow of Granular Media. Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA, marzec 2023. http://dx.doi.org/10.55461/kmiz5819.

Pełny tekst źródła

Streszczenie:

We present a systematic investigation of computational approaches to the modeling of granular materials. Granular materials are ubiquitous in everyday life and in a variety of engineering and industrial applications. Despite the apparent simplicity of the laws governing particle-scale interactions, predicting the continuum mechanical response of granular materials still poses extraordinary challenges. This is largely due to the complex history dependence resulting from continuous rearrangement of the microstructure of granular material, as well as the mechanical interlocking due to grain morphology and surface roughness. X-Ray Computed Tomography (XRCT) is used to characterize the grain morphology and the fabric of the granular media, naturally deposited sand in this study. The Level-Set based Discrete Element Method (LS-DEM) is then used to bridge the granular behavior gap between the micro and macro scale. The LS-DEM establishes a one-to-one correspondence between granular objects and numerical avatars and captures the details of grain morphology and surface roughness. However, the high-fidelity representation significantly increases the demands on computational resources. To this end a parallel version of LS-DEM is introduced to significantly decrease the computational demands. The code employs a binning algorithm, which reduces the search complexity of contact detection from O(n2) to O(n), and a domain decomposition strategy is used to elicit parallel computing in a memory- and communication-efficient manner. The parallel implementation shows good scalability and efficiency. High fidelity LS avatars obtained from XRCT images of naturally deposited sand are then used to replicate the results of triaxial tests using the new, parallel LS-DEM code. The result show that both micro- and macro-mechanical behavior of natural material is well captured and is consistent with experimental data, confirming experimental observation that the primary source of peak strength of sand is the mechanical interlocking between irregularly shaped grains. Specifically, triaxial test simulations with a flexible membrane produce a very good match to experimentally observed relationships between deviatoric stress and mobilized friction angle for naturally deposited sand. We then explore the viability of modeling dynamic problems with a new formulation of an impulse based LS-DEM. The new formulation is stable, fast, and energy conservative. However, it can be numerically stiff when the assembly has substantial mass differences between particles. We also demonstrate the feasibility of modeling deformable structures in the rigid body framework and propose several enhancements to improve the convergence of collision resolution, including a hybrid time integration scheme to separately handle at rest contacts and dynamic collisions. Finally, we extend the impulse-based LS-DEM to include arbitrarily shaped topographic surfaces and exploit its algorithmic advantages to demonstrate the feasibility of modeling realistic behavior of granular flows. The novel formulation significantly improves performance of dynamic simulations by allowing larger time steps, which is advantageous for observing the full development of physical phenomena such as rock avalanches, which we present as an illustrative example.

Style APA, Harvard, Vancouver, ISO itp.

Steffenson, B. J., I. Mayrose, Gary J. Muehlbauer i A. Sharon. ing and comparative sequence analysis of powdery mildew and leaf rust resistance gene complements in wild barley. Israel: United States-Israel Binational Agricultural Research and Development Fund, 2021. http://dx.doi.org/10.32747/2021.8134173.bard.

Pełny tekst źródła

Streszczenie:

Our overall, long-term goal is to exploit the genetic diversity present in cereal wild relatives for the development of cultivars with durable disease resistance. Our specific objectives for this proposal were to: 1) Utilize Association Genetics Resistance Gene Enrichment Sequencing (AgRenSeq) to identify and clone powdery mildew and leaf rust resistance gene complements in wild barley and 2) Conduct comparative sequence analyses of the cloned resistance genes to elucidate the basis of their specificity and evolution. The deployment of resistant cultivars is the most effective, economically efficient, and environmentally sound means of controlling plant diseases, especially in small grain cereals. The systems selected for study in this proposal are barley (Hordeum vulgare ssp. vulgare, Hvv), its wild progenitor (Hordeum vulgare ssp. spontaneum, Hvs) and the powdery mildew (Blumeria graminis f. sp. hordei, Bgs) and leaf rust (Puccinia hordei, Ph) pathogens. We compiled a diverse panel of Hvs accessions (the Wild Barley Diversity Collection or WBDC; N = 314) from across its native range and evaluated it to 40 isolates of Bgs and 12 isolates of Ph. We obtained genomic DNA sequences enriched for Nucleotide Binding Site-Leucine Rich Repeat (NLR) type resistance genes for 203 WBDC accessions, plus cultivar Morex for which the first reference genome sequence of barley was based. We assembled the 250 bp Illumina sequencing reads into contigs using CLC assembly cell. From this effort, we successfully assembled the sequences of 201 WBDC accessions plus Morex and used NLR Parser to identify contigs containing NLR genes. AgRenSeq was then used to identify k-mers (short oligonucleotide sequences of length k) that were associated with resistance to each isolate of the two pathogens. This analysis was performed individually for all WBDC accessions and each individual pathogen race (9,898 host accession x pathogen race combinations). We visualized the results from these analyses in Manhattan plots and identified 311 and 144 peaks for powdery mildew and leaf rust resistance, respectively. The next step in the analysis was to identify the contigs associated with the peaks in the Manhattan plots. BLAST (Basic Local Alignment Search Tool) searches were employed to identify closely related contigs in other WBDC accessions or in Morex. We identified two candidate R genes that were only present in resistant WBDC accessions. One of these was present in seven WBDC lines and was associated with resistance to four leaf rust isolates. BLAST analysis of this gene revealed that it was Rph15, one of the most widely effective leaf rust resistance genes reported in Hordeum. This gene was cloned and functionally validated in association with our Australian colleagues (Cheng et al., 2021). We are currently in the process of cloning six of other resistance genes: four for powdery mildew and two for leaf rust. As the contigs do not contain much of the promoter sequences, we have employed a genome walking approach to identify 2,500 bp of promoter sequence. To speed up and simplify the cloning of resistance genes from the WBDC, the PI established the International Wild Barley Sequencing Consortium (IWBSC; https://iwbsc.umn.edu/) comprised of over 60 researchers from 14 different countries and raised over $150,000 through crowdfunding to pay for 10X depth sequence coverage. Genome-wide association study (GWAS) of whole genome sequencing (WGS) data identified extremely strong and clear signals of association for several resistance genes which will facilitate gene cloning in concert with a wild barley pan-genome currently under construction. The cloning of multiple resistance gene can facilitate the development of durably resistant cultivars by inserting, through transgenesis, cassettes of multiple resistance genes.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!