Gotowe bibliografie tematyczne / Ceramic-Metal Systems

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Ceramic-Metal Systems”

Autor: Grafiati
Data publikacji: 7 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Ceramic-Metal Systems”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Ceramic-Metal Systems"

1

Saiz, E., R. M. Cannon i A. P. Tomsia. "Reactive Spreading in Ceramic/Metal Systems". Oil & Gas Science and Technology 56, nr 1 (styczeń 2001): 89–96. http://dx.doi.org/10.2516/ogst:2001011.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Passerone, A., i M. L. Muolo. "Joining Technology in Metal-Ceramic Systems". Materials and Manufacturing Processes 15, nr 5 (sierpień 2000): 631–48. http://dx.doi.org/10.1080/10426910008913010.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Lee, M., i Y. H. Yoo. "Analysis of ceramic/metal armour systems". International Journal of Impact Engineering 25, nr 9 (październik 2001): 819–29. http://dx.doi.org/10.1016/s0734-743x(01)00025-2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Passerone, Alberto. "Interfacial phenomena in metal-ceramic systems". Materials Chemistry and Physics 15, nr 3-4 (wrzesień 1986): 263–79. http://dx.doi.org/10.1016/0254-0584(86)90005-2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Wagner, M., T. Wagner, D. L. Carroll, J. Marien, D. A. Bonnell i M. Rühle. "Model Systems for Metal-Ceramic Interface Studies". MRS Bulletin 22, nr 8 (sierpień 1997): 42–48. http://dx.doi.org/10.1557/s0883769400033807.

Pełny tekst źródła
Streszczenie:
Metal-ceramic composite applications range from electronic devices such as electronic packaging, thin-film technology in microwave circuitry, and magnetic storage media to catalyst supports, protective coatings, and high-temperature structural components. These applications rely heavily on the ability to engineer the mechanical and electronic properties of metal-ceramic interfaces. To understand fundamental aspects of these interfaces, a variety of experimental and theoretical studies on “model systems” have been performed, correlating macroscopic material behavior and microscopic characteristics. The results serve as a guide to more complex systems, with a closer relationship to technological applications.
Style APA, Harvard, Vancouver, ISO itp.
6

Daróczi, Lajos, C. Hegedűs, V. Kökényesi i Dezső L. Beke. "Interfacial Structures Developed by Firing Metal-Ceramic Dental Systems". Materials Science Forum 517 (czerwiec 2006): 153–58. http://dx.doi.org/10.4028/www.scientific.net/msf.517.153.

Pełny tekst źródła
Streszczenie:
Metal-ceramic systems play very important role in the prosthetic dentistry. The most widely used metallic alloys are the Ni-Cr, Co-Cr, Au-based alloys and Ti. The bonding strength between the metal base and the ceramic covering layer can be very different in different systems and is strongly affected by the firing conditions as well. For the further improvement of the bonding properties the detailed knowledge of the microstructure of the metal–ceramic interlayer is essential. In this work our results, obtained by scanning and transmission electron microscopy on systems of commercial alloys and corresponding porcelains will be reviewed.
Style APA, Harvard, Vancouver, ISO itp.
7

Zhao, Hong, Pedro Miranda, Brian R. Lawn i Xiaozhi Hu. "Cracking in Ceramic/metal/polymer Trilayer Systems". Journal of Materials Research 17, nr 5 (maj 2002): 1102–11. http://dx.doi.org/10.1557/jmr.2002.0163.

Pełny tekst źródła
Streszczenie:
Fracture and deformation in model brittle-outerlayer/metal-core/polymer-substrate trilayer systems in concentrated loading are studied. Model systems for experimental study are fabricated from glass microscope slides glued with epoxy adhesive onto steel and aluminum sheets, and the resulting laminates glued onto polycarbonate substrate bases. Critical loads to initiate two basic fracture modes in the glass layers—cone cracks at the top surfaces and radial cracks at the undersurfaces—are measured as a function of metal thickness byin situobservation through the glass side walls. Finite element modeling (FEM) is used to quantify these competing fracture modes. The more damaging radial fracture mode is attributed to flexure of the glass layers on soft underlayers. Although much of this flexure can be eliminated by removing the soft adhesive interlayer between glass and metal, yield in the metal limits the potential increases in critical load for radial cracking. Trilayer systems consisting of porcelain fused to Co-, Pd- and Au-alloy core support layers relevant to dental crowns are then analyzed by FEM. The hardness (especially) and elastic modulus of the metal are identified as the primary controlling material parameters, with modulus and strength of the brittle layer as supplemental parameters. Guidelines for improving metal-based crownlike layer structures are thereby developed via optimization of metal properties and relative layer thicknesses.
Style APA, Harvard, Vancouver, ISO itp.
8

Upadhyaya, GS. "Sintering of multiphase metal and ceramic systems". Materials & Design 10, nr 5 (wrzesień 1989): 268–70. http://dx.doi.org/10.1016/s0261-3069(89)80068-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Mirkovic, Nemanja. "Mechanical properties of metal-ceramic systems from nickel-chromium and cobalt-chromium alloys". Vojnosanitetski pregled 64, nr 4 (2007): 241–45. http://dx.doi.org/10.2298/vsp0704241m.

Pełny tekst źródła
Streszczenie:
Background/Aim. Metal-ceramic bond strength and alloys' elastic modulus clearly determine the potential of alloy application, because the ceramic integrity during mastication depends on these two characteristics. The aim of this study was to evaluate metal-ceramic bond strength and elastic modulus of cobalt-chromium alloys in making porcelainfused- to-metal restorations, regarding the application of the most frequent nickel-chromium alloy. Methods. The research was performed as an experimental study. Six metalceramic samples were made from nickel-chromium alloy (Wiron 99) and cobalt-chromium alloy (Wirobond C), according to the manufactures manuals and instructions from ISO 9693: 1996. Three-point bending test was performed up to the ceramic fracture. The fracture load was measured on an universal testing machine (Zwick, type 1464), with cross-head speed of 0,05mm/min. Results. The results of this study confirmed the significant differences between the metal-ceramic bond strength (p < 0.01) and elastic modulus (p < 0.001) of nickel-chromium and cobalt-chromium alloys, where cobalt-chromium alloys showed higher values for both tested parameters. Conclusion. Cobalt-chromium metal-ceramic alloys can successfully replace nickel-chromium alloys, especially for fabrication of long-span metal-ceramic bridges due to the great flexural strength.
Style APA, Harvard, Vancouver, ISO itp.
10

Martins, Leandro Moura, Fabio Cesar Lorenzoni, Alcides Oliveira de Melo, Luciana Mendonça da Silva, José Luiz G. de Oliveira, Pedro Cesar Garcia de Oliveira i Gerson Bonfante. "Internal fit of two all-ceramic systems and metal-ceramic crowns". Journal of Applied Oral Science 20, nr 2 (kwiecień 2012): 235–40. http://dx.doi.org/10.1590/s1678-77572012000200019.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Ceramic-Metal Systems"

1

GAMBARO, SOFIA. "Investigation of solid-liquid interactions in high temperature metal-ceramic systems". Doctoral thesis, Università degli studi di Genova, 2018. http://hdl.handle.net/11567/930220.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Ara?jo, Andrea Medeiros de Aladim. "Caracteriza??o Microestrutural e Tribocorrosiva de Sistemas Metalocer?micos Odontol?gicos do Tipo Ni-Cr/Porcelana E Ni-Cr/Ti/Porcelana". Universidade Federal do Rio Grande do Norte, 2006. http://repositorio.ufrn.br:8080/jspui/handle/123456789/12737.

Pełny tekst źródła
Streszczenie:
Made available in DSpace on 2014-12-17T14:07:01Z (GMT). No. of bitstreams: 1 AndreaMAA.pdf: 2205764 bytes, checksum: 63a73bc4d3b5aa4b2d1dd4cc4bb34040 (MD5) Previous issue date: 2006-09-01
The partial fixed prosthodontics restoration is used to rehabilitate form and function of partial or total compromised teeth, having to remain permanently joined to remainder tooth. The most useful material on prosthodontics is the feldspar porcelain, commercialized as aluminosilicate powders. Dental porcelains are presented with limited mechanical properties to rehabilitate extensive spaces. The association with Ni-Cr metallic systems (metal-ceramic system) allows that the metallic substructure compensates the fragile porcelain nature, preserving the thermal insulation and aesthetics desirable, as well as reducing the possibility of cracking during matication efforts. Cohesive flaws by low mechanical strength connect the metallic substructure to the oral environment, characterized by a electrolytic solution (saliva), by aggressive temperature, pH cyclic changes and mechanical requests. This process results on ionic liberation that could promote allergic or inflammatory responses, and/or clinical degradation of ceramometal system. The aim of this study was to evaluate the presence of an intermediate titanium layer on the microscopic fracture behavior of porcelains on ceramometal systems. Plasma deposition of titanium films result in regular passivating oxide layers which act as barriers to protect the metallic substrate against the hazardous effects of corrosive saliva. Tribocorrosion tests were performed to simulate the oral environment and mechanical stress, making it possible the early detection of crack formation and growth on metal-ceramic systems, which estimate the adherence between the compounds of this system. Plain samples consisting of dental feldspar porcelain deposited either onto metallic substrates or titanium films were fired and characterized by scanning electron microscopy. The result showed that the titanium film improved the adherence of the system compared to conventional metal-ceramic interfaces, thus holding crack propagation
A pr?tese parcial fixa ? empregada na reabilita??o da forma e fun??o de dentes parcial ou totalmente comprometidos, devendo permanecer unida permanentemente aos remanescentes dent?rios. O material mais utilizado na confec??o de pr?teses odontol?gicas ? a porcelana feldsp?tica, disponibilizada sob a forma de p? de aluminossilicatos. As porcelanas odontol?gicas apresentam-se com propriedades mec?nicas limitadas para a reabilita??o em monobloco de espa?os ed?ntulos extensos. A associa??o com sistemas met?licos de n?quel-cromo (sistema metalocer?mico) permite que a infra-estrutura met?lica compense a natureza fr?gil da porcelana, preservando-se a isola??o t?rmica e est?tica desej?veis, bem como reduzindo a possibilidade do desenvolvimento de trincas durante os esfor?os mastigat?rios. Falhas coesivas por baixa resist?ncia mec?nica da porcelana, comunicam a estrutura met?lica com o ambiente oral, caracterizado pela presen?a de uma solu??o eletrol?tica (saliva), pela agressividade das varia??es c?clicas de temperatura, pH e das solicita??es mec?nicas. Este processo resulta na libera??o de ?ons met?licos que podem desencadear respostas al?rgicas ou inflamat?rias, e /ou na degrada??o cl?nica precoce do sistema metalocer?mico. Este trabalho teve por objetivo avaliar o efeito da presen?a de uma camada intermedi?ria de tit?nio sobre o comportamento fratogr?fico, microsc?pico de porcelanas em sistemas metalocer?micos. A aplica??o por plasma de um filme fino de tit?nio, gera uma camada ?xida passivante regular que tende a proteger o substrato met?lico contra os efeitos corrosivos da saliva. Ensaios tribocorrosivos foram realizados para simular o ambiente oral, detectando precocemente a forma??o de trincas no sistema metalocer?mico, o que qualifica a ader?ncia entre os componentes do referido sistema. Foram produzidas amostras planas nas quais suspens?es de porcelana feldsp?tica odontol?gica foram depositadas e queimadas sobre substratos met?licos modificados por filme fino de tit?nio, comparando-as com o sistema metalocer?mico convencional. O sistema de teste apresentou melhores resultados, caracterizando-se pelo menor n?mero de tra?os de fratura superficial adjacentes ? ?rea de ensaio
Style APA, Harvard, Vancouver, ISO itp.
3

Beghini, Ana Cristina da Rocha Duque. "Avaliação da radiopacidade de diferentes sistemas cerâmicos livres de metal". Universidade Federal de Juiz de Fora, 2011. https://repositorio.ufjf.br/jspui/handle/ufjf/2061.

Pełny tekst źródła
Streszczenie:
Submitted by Renata Lopes (renatasil82@gmail.com) on 2016-07-13T15:19:13Z No. of bitstreams: 1 anacristinadarochaduquebeghini.pdf: 604681 bytes, checksum: 77222c9c607ebf796ce7a6f000f0c9c1 (MD5)
Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2016-07-13T16:58:18Z (GMT) No. of bitstreams: 1 anacristinadarochaduquebeghini.pdf: 604681 bytes, checksum: 77222c9c607ebf796ce7a6f000f0c9c1 (MD5)
Made available in DSpace on 2016-07-13T16:58:18Z (GMT). No. of bitstreams: 1 anacristinadarochaduquebeghini.pdf: 604681 bytes, checksum: 77222c9c607ebf796ce7a6f000f0c9c1 (MD5) Previous issue date: 2011-05-02
No presente estudo avaliou-se a radiopacidade de restaurações cerâmicas livres de metal de forma objetiva, subjetiva e por meio de MEV/EDS. Foram utilizadas as cerâmicas: Noritake EX-3 (Noritake), VM13 (Vita), IPS Empress II (Ivoclar Vivadent), IPS E.max ZirPress (Ivoclar Vivadent) e PM9 (Vita). Para a avaliação objetiva foram confeccionados cinco corpos de prova nas espessuras de 1, 2, 3 e 4 mm, que foram radiografados juntamente com uma escala de densidade e uma secção dental, utilizando-se sistema digital direto. As imagens radiográficas foram submetidas à leitura de densidade óptica. Para a avaliação subjetiva foram confeccionados phantoms, simulando a parte posterior das arcadas dentárias, no qual dois dentes de cada phantom foram submetidos a preparos inlay, restaurados com as cerâmicas estudadas, e radiografados pela técnica interproximal. Essas radiografias foram avaliadas por três grupos de examinadores: cirurgiões-dentistas, radiologistas e protesistas. Para a análise dos elementos químicos que dão características de radiopacidade aos materiais, foi realizada avaliação pelo MEV/EDS. Os resultados da avaliação objetiva indicaram diferenças significativas entre as radiopacidades das cerâmicas estudadas. Para 1 e 2 mm de espessuras todas as cerâmicas apresentaram radiopacidade superior a da dentina e inferior a do esmalte. A cerâmica Noritake EX3 apresentou maior radiopacidade em todas as espessuras. Não se puderam constatar, nas avaliações simulando condições clínicas, as diferenças de radiopacidades observadas na avaliação objetiva. O grupo dos cirurgiões-dentistas apresentou a menor acurácia diagnóstica quando comparados aos grupos de especialistas, sendo que os radiologistas apresentaram a maior acurácia diagnóstica para cerâmica (0,57). Independente do grupo de avaliadores, não foi possível a distinção radiográfica entre cerâmicas livre de metal e compósitos. O resultado da avaliação dos materiais pelo MEV/EDS indicou como possíveis elementos radiopacificadores: bário para as cerâmicas Noritake EX-3 (2,19%), VM13 (1,04%), PM9 (0,70%) e IPS Empress II (0,70%); e zinco (4,50%) e cério (1,45%) para a cerâmica IPS E.max ZirPress.
The aim of this study to evaluate the radiopacity of metal-free ceramic restorations in an objective, subjective and by SEM and EDS. Ceramics were used: Noritake EX-3 (Noritake), VM13 (Vita), IPS Empress II (Ivoclar Vivadent), IPS e.max ZirPress (Ivoclar Vivadent) and PM9 (Vita). For the objective evaluation were prepared five specimens with thickness of 1, 2, 3 and 4 mm, which were radiographed with a aluminum step and a dental section, using direct digital system. The radiographic images were submitted to the reading of optical density. For subjective evaluation were fabricated phantoms, simulating the back of the dental arches, in which two teeth of each phantom received an inlay preparation, were restored with the studied ceramics, and were x-rayed by the interproximal technique. These radiographs were evaluated by three groups of examiners, dentists, radiologists, and prosthetists. To analyze the chemical elements that provide radiopacity characteristics of the materials, evaluation was performed by SEM and EDS. The results of objective evaluation indicated significant differences between the radiopacity of the studied ceramics. For 1 and 2 mm in thickness and the ceramics were all higher radiopacity dentin and enamel below. Ceramics Noritake EX3 showed higher radiopacity in all thicknesses. There was evident on the evaluations simulating clinical conditions, the differences observed in the radiopacity of objective evaluation. The group of dentists had a lower diagnostic accuracy when compared to groups of specialists, and radiologists had the highest diagnostic accuracy for ceramics (0.57). Independent group of evaluators was not possible to distinguish between X-ray and metal-free ceramic composites. The result of evaluation of materials by SEM and EDS indicated as possible elements radiopacifiers barium to ceramic Noritake EX-3 (2.19%), VM13 (1.04%), PM9 (0.70%) and IPS Empress II (0.70%) and zinc (4.50%) and cerium (1.45%) for the ceramic IPS E.max ZirPress.
Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "Ceramic-Metal Systems"

1

Zhu, Dongming, i Kevin Plucknett, red. Advances in Ceramic Coatings and Ceramic-Metal Systems: Ceramic Engineering and Science Proceedings, Volume 26, Number 3. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2005. http://dx.doi.org/10.1002/9780470291238.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Strietzel, Roland. Die Werkstoffkunde der Metall-Keramik-Systeme. München: Verlag Neuer Merkur, 2005.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Filiaggi, Mark J. Interface characterization of the plasma sprayed ceramic coating/metal implant system. Ottawa: National Library of Canada, 1990.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Y, Lin R., TMS Process Fundamentals Committee., Minerals, Metals and Materials Society. Thermodynamics and Phase Equilibria Committee., Nihon Kinzoku Gakkai i Minerals, Metals and Materials Society. Meeting, red. Design fundamentals of high temperature composites, intermetallics, and metal-ceramics systems. Warrendale, Pa: The Society, 1996.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Evans, Anthony, Joseph A. Pask i Springer Staff. Surfaces and Interfaces in Ceramic and Ceramic - Metal Systems. Springer London, Limited, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

(Editor), Dongming Zhu, Kevin Plucknett (Editor) i Waltraud M. Kriven (Editor), red. Advanced Ceramic Coatings and Ceramic-Metal Systems (Ceramic Engineering and Science Proceedings). The American Ceramic Society, 2005.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Upadhyaya, G. Sintering of Multiphase Metal and Ceramic Systems. Trans Tech Publications Ltd, 1990.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Upadhyaya, Gopal S. Sintering of Multiphase Metal and Ceramic Systems. Trans Tech Publications, Limited, 1990.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Kriven, Waltraud M., Dongming Zhu i Kevin Plucknett. Advances in Ceramic Coatings and Ceramic-Metal Systems: A Collection of Papers Presented at the 29th International Conference on Advanced Ceramics and Composites, Jan 23-28, 2005, Cocoa Beach, FL, Volume 26, Issue 3. Wiley & Sons, Incorporated, John, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Kriven, Waltraud M., Dongming Zhu i Kevin Plucknett. Advances in Ceramic Coatings and Ceramic-Metal Systems: A Collection of Papers Presented at the 29th International Conference on Advanced Ceramics and Composites, Jan 23-28, 2005, Cocoa Beach, FL. Wiley & Sons, Incorporated, John, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Ceramic-Metal Systems"

1

Siddiq, Amir, i Siegfred Schmauder. "Multiscale Simulation of Metal/Ceramic Interface Fracture". W IUTAM Symposium on Multi-Functional Material Structures and Systems, 343–55. Dordrecht: Springer Netherlands, 2009. http://dx.doi.org/10.1007/978-90-481-3771-8_35.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Paiva, O. C., L. Ferreira i M. A. Barbosa. "Microstructure, Mechanical Properties and Stability of Brazed Metal/Ceramic Systems". W Interfacial Science in Ceramic Joining, 329–40. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-017-1917-9_28.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Marques, E. A. S., Lucas F. M. da Silva i C. Sato. "Testing of Dual Adhesive Ceramic-Metal Joints for Aerospace Applications". W Advances in Modeling and Design of Adhesively Bonded Systems, 171–90. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118753682.ch6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Dupeux, Michel, i Alain Bosseboeuf. "Application of the Blister Test to Adhesion Energy Measurements in Metal/Ceramic Film-on-Substrate Systems". W Interfacial Science in Ceramic Joining, 319–27. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-017-1917-9_27.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Eddya, Mohammed, i Khalil El-Hami. "Thermal and Electrical Conductivities of Bio-Ceramic Amalgams Based on Hydroxyapatite Doped by Low Metal (Co, Ni, Cu, Mn) Concentration for Dental and Orthopedic Engineering". W Advances in Intelligent Systems and Computing, 364–74. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36664-3_41.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Saiz, E., A. P. Tomsia i R. M. Cannon. "Wetting and Work of Adhesion in Oxide/Metal Systems". W Ceramic Microstructures, 65–82. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5393-9_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Makino, Takehiko, i Shun-ichiro Tanaka. "Modeling of Metal/Ceramics Wetting Systems". W Interfaces in Heterogeneous Ceramic Systems, 31–41. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118144084.ch3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Pundt, A. "Metal-Hydrogen Systems: What Changes when Systems go to the Nano-Scale?" W Ceramic Transactions Series, 181–92. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118585160.ch16.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Perevertailo, V. M., i O. B. Loginova. "Contact Interaction in Carbon-Metal Systems for Joining and Integration". W Ceramic Integration and Joining Technologies, 193–229. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118056776.ch7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Chatain, D., V. Ghetta i J. Fouletier. "Wetting and Interfaces in Metal-Oxide Systems: Sensitivity to Experimental Conditions". W Interfacial Science in Ceramic Joining, 45–55. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-017-1917-9_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Ceramic-Metal Systems"

1

Petrescu, Emanuela, Cosmin Sinescu, Meda Lavinia Negrutiu, Daniela Pop, Roxana Rominu, Marius Enescu, Mihai Rominu, Adrian Bradu, George Dobre i Adrian Gh Podoleanu. "OCT and RX validation of metal-ceramic crowns repaired with ceramic material". W SPIE Optical Systems Design, redaktor Gérard Berginc. SPIE, 2011. http://dx.doi.org/10.1117/12.896770.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Chavara, Dorji, i Andrew Ruys. "Continuous Bulk Functionally Graded Metal-Ceramic Composites". W 15th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-2568.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Schwobel, Andre, Benjamin Fabian, Miriam Rauer i Daniel Schnee. "Metal Ceramic Substrates: Enabling Heat Distribution in Power Electronic Systems". W 2020 26th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC). IEEE, 2020. http://dx.doi.org/10.1109/therminic49743.2020.9420532.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Alvin, M. A. "Assessment of Ceramic and Metal Media Filters in Advanced Power Systems". W ASME Turbo Expo 2001: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/2001-gt-0574.

Pełny tekst źródła
Streszczenie:
Advanced, coal- and biomass-based gas turbine power generation technologies (IGCC, PFBC, PCFBC, HIPPS) are currently under development and demonstration. Efforts at the Siemens Westinghouse Power Corporation (SWPC) have been focused on the development and commercialization of hot gas filter systems as an enabling technology for power generation. As part of the commercialization effort, SWPC has been actively involved in the development of advanced filter materials and component configuration, has participated in numerous surveillance programs characterizing the material properties and microstructure of field tested filter elements, and has undertaken an extended accelerated filter life testing program. This paper reviews SWPC’s material and component assessment efforts, identifying the performance, stability, and life of porous oxide- and nonoxide-based ceramic, as well as metal and intermetallic filters used in advanced, high temperature, coal combustion systems.
Style APA, Harvard, Vancouver, ISO itp.
5

Selverian, J. H., Dave A. ONeil i Shinhoo Kang. "Performance Testing and Strength Prediction of Ceramic-to-Metal Joints". W ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/93-gt-412.

Pełny tekst źródła
Streszczenie:
Brazed joints were made between silicon nitride and Ni-based and Fe-based super alloys. Room temperature shear (torsion) strengths ranged from 75–242 MPa for Si3N4-to-Incoloy 909 joints and from 30–127 MPa for the Si3N4-to-Inconel 718 joints. At 500 °C the joint strength was 120 MPa while at 650°C and 950°C the joints strengths were less than 20 MPa. These low strengths at 650°C and 950°C were attributed to a reduction in the shrink-fit and to low braze strength at these high temperatures. Finite element analysis (FEA) and a probabilistic failure theory (CARES) were used to predict the joint strengths. The predicted joint strengths agreed well with measured joint strengths in torsional loading at 20°C. Torsion tests were also performed at 650°C. Aspects of the material systems, residual stresses, mechanical behavior, and strength predictions are presented. Two new braze alloys based on the Au-Ni-Cr-Fe system were used to overcome the poor high temperature strength. Joints made with these brazes had good strength (85 MPa and 35 N-m) at 650°C.
Style APA, Harvard, Vancouver, ISO itp.
6

O’Neil, D. A., J. H. Selverian i K. S. Kim. "Plasticity Considerations in Probabilistic Ceramic-to-Metal Joint Design". W ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-229.

Pełny tekst źródła
Streszczenie:
A new probabilistic failure criterion was developed for the design of high-temperature ceramic-to-metal joints. The essential feature of the theory is the inclusion of the energy dissipated during plastic deformation of the adjacent braze layer in the joint. A large number of bi-material interface fracture simulations were performed for different crack positions and orientations near the bimaterial interface to determine the effect on stresses in the ceramic near the interface. The effective stress values were then ported to a probabilistic failure analysis code, which permitted simple inclusion of the new failure criterion. Brazed joints were made and failure tested in torsion to verify the failure criterion. Results show that the new failure criterion more closely approximates the failure of the ceramic-to-metal joints over the entire range of ultimate loads, an is a significant improvement in the failures criteria previously used for this type of joint design. Aspects of the failure criterion, material systems, residual stresses, mechanical behavior, and strength predictions will be presented.
Style APA, Harvard, Vancouver, ISO itp.
7

Heinrich, Ulf, Helmut Pucher, Bjoern Schenk, Walter Reimers i Thomas Schmackers. "Ceramic/Metal-Shaft/Hub Connection for Applications in Small High Temperature Ceramic Gas Turbine Rotors". W ASME Turbo Expo 2000: Power for Land, Sea, and Air. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/2000-gt-0534.

Pełny tekst źródła
Streszczenie:
The paper provides a synopsis of the research activities currently pursued at the Technical University Berlin, Hahn-Meitner-Institut Berlin and Honeywell Engines & Systems with respect to ceramic/metal joining concept for small ceramic high temperature gas turbine rotors. The objective was to design an interference fit type joint that can be cost effectively produced and reliably transmit torque at elevated temperatures (up to 800°C). Experimental and numerical investigations have been carried out to examine two slightly different designs which both utilize the same basic principle of a shrink fit connection that is able to compensate the thermal expansion mismatch between ceramic and metal and therefore is capable of keeping the contact pressure at the ceramic/metal interface nearly constant over a wide operating temperature range. The joints have been tested under torsional load at isothermal conditions in order to determine the static coefficient of friction and the torque carrying capability, as well as to optimize the joint geometry. The stress distribution inside the joint has been determined by FEA and subsequently evaluated by measuring the residual stress state of the joint in the ceramic by neutron diffraction.
Style APA, Harvard, Vancouver, ISO itp.
8

Ulianitsky, V. Yu, D. V. Dudina, I. S. Batraev, N. V. Bulina, A. I. Kovalenko, M. A. Korchagin i B. B. Bokhonov. "In situ formation of metal-ceramic composite coatings by detonation spraying of titanium". W INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS OF MULTILEVEL SYSTEMS 2014. AIP Publishing LLC, 2014. http://dx.doi.org/10.1063/1.4899028.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Lester, Brian, Yves Chemisky i Dimitris Lagoudas. "Numerical Prediction of Effective Transformation Properties of Hybrid SMA-Ceramic Composites". W ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2010. http://dx.doi.org/10.1115/smasis2010-3748.

Pełny tekst źródła
Streszczenie:
Metal-ceramic composites are being increasingly explored in an effort to find new materials for use in extreme environments. Via functional grading of of the volume fraction of the constituant phases and other techniques, the material can be optimized to incorporate the mechanical properties of the metal phase with the thermal properties of the ceramic phase. To get further benefit of the metal phase, a new area being investigated is the incorporation of Shape Memory Alloys (SMAs). In order to predict the phase transformation features of an SMA embedded in a stiff ceramic matrix, a micromechanical approach is developed to find the effective phase diagram of the ceramic-SMA composite. From this analysis, other composite characteristics such as stress in each phase and the evolution of tranformation strain in the SMA can be determined in order to improve the design of such new composite materials.
Style APA, Harvard, Vancouver, ISO itp.
10

Sergeev, Victor P., Victor E. Panin, Sergei G. Psakhie, Alexandr G. Chernyavskii, Valerii P. Svechkin, Yurii F. Khristenko, Mark P. Kalashnikov i Andrei V. Voronov. "Magnetron deposition of metal-ceramic protective coatings on glasses of windows of space vehicles". W INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS OF MULTILEVEL SYSTEMS 2014. AIP Publishing LLC, 2014. http://dx.doi.org/10.1063/1.4901499.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Ceramic-Metal Systems"

1

Dong, Junhang, Hai Xiao, Adam Trontz, Baokai Chen, Shixuan Zeng i Wenge Zhu. Robust metal-ceramic coaxial cable sensors for distributed temperature monitoring in fossil energy power systems. Office of Scientific and Technical Information (OSTI), październik 2017. http://dx.doi.org/10.2172/1395840.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Pawel, J. E. Analysis of adhesion test methods and the evaluation of their use for ion-beam-mixed metal/ceramic systems. Office of Scientific and Technical Information (OSTI), lipiec 1988. http://dx.doi.org/10.2172/6827506.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Ceramic-Metal Systems” dla poszczególnych typów źródeł:
Artykuły w czasopismach
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii