Gotowe bibliografie tematyczne / Ceramic materials

Gotowa bibliografia na temat „Ceramic materials”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 30 lipca 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Spis treści

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Ceramic materials”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Ceramic materials"

1

Shi, Hao Yu, Runxuan Pang, Jing Yang, Di Fan, HongXin Cai, Heng Bo Jiang, Jianmin Han, Eui-Seok Lee i Yunhan Sun. "Overview of Several Typical Ceramic Materials for Restorative Dentistry". BioMed Research International 2022 (18.07.2022): 1–18. http://dx.doi.org/10.1155/2022/8451445.

Pełny tekst źródła
Streszczenie:
With the development of ceramic technology, prosthodontic ceramics are becoming a useful option for improving esthetic outcomes in dentistry. In this paper, various ceramic materials were reviewed and evaluated, and their advantages and disadvantages and indications in oral prosthodontics were analyzed objectively. The properties of resin-based ceramics, polycrystalline ceramics, and silicate ceramics were compared and analyzed. Resin-based ceramics may replace other ceramic materials in the CAD/CAM field.
Style APA, Harvard, Vancouver, ISO itp.
2

Rabinovich, E. M. "Ceramic Materials for Electronic Packaging". Journal of Electronic Packaging 111, nr 3 (1.09.1989): 183–91. http://dx.doi.org/10.1115/1.3226532.

Pełny tekst źródła
Streszczenie:
The paper reviews ceramic materials that are used or can be used in electronic packaging. Main attention is given in relatively new packaging materials such as highly thermal conductive AlN and SiC (BeO-doped) or low-firing cordierite and spodumene glass-ceramics. Application of sol-gel processes in preparation of ceramic powders is discussed.
Style APA, Harvard, Vancouver, ISO itp.
3

Scolaro, Juliano Milczewsky, Jefferson Ricardo Pereira, Accácio Lins do Valle, Gerson Bonfante i Luiz Fernando Pegoraro. "Comparative study of ceramic-to-metal bonding". Brazilian Dental Journal 18, nr 3 (2007): 240–43. http://dx.doi.org/10.1590/s0103-64402007000300012.

Pełny tekst źródła
Streszczenie:
Dentists and technicians have used dental ceramics associated with different types of alloys without taking into account the characteristics of compatibility of these materials. Knowing the properties of the alloy and ceramic used in metal/ceramic restorations is a key factor for treatment success. The purpose of this study was to evaluate the bond strength of a palladium-silver alloy (Pors-on 4) to 3 ceramics (Ceramco, Noritake and Vita VMK-68) using shear forces at the metal-ceramic interface. A stainless steel cylindrical matrix was used for preparation of the metal dies, application of ceramic and shear strength testing. Thirty palladium-silver alloy cylinders received two layers of opaque and two layers of body porcelain, and shear tests were performed in a universal testing machine at a cross-head speed of 0.5 mm/min. Shear bond strength means (in MPa) were: 28.21(Ceramco), 28.96 (Noritake) and 24.11 (Vita VMK-68). One-way ANOVA did not show statistically significant differences (p>0.05) among the materials. The results of this study indicate that the three evaluated ceramic systems are suitable to be used in combination with the tested palladium-silver alloy.
Style APA, Harvard, Vancouver, ISO itp.
4

Guo, X. L., P. X. Cao, H. N. Liu, Y. Teng, Y. Guo i H. Wang. "Tribological Properties of Ceramics Tool Materials in Contact with Wood-Based Materials". Advanced Materials Research 764 (wrzesień 2013): 65–69. http://dx.doi.org/10.4028/www.scientific.net/amr.764.65.

Pełny tekst źródła
Streszczenie:
Tribological properties of ceramic cutting tool materials in contact with wood based materials were studied in this paper by examining how Al2O3-ceramics and Si3N4-ceramics behave in dry sliding experiment in contact with wood-based materials and by comparing their behavior with tungsten carbide material at the same time. It had been found that the ceramics exhibited much better tribological properties than tungsten carbide material, and Si3N4-ceramic performed better than Al2O3-ceramics. The Al2O3-ceramics with an addition of ZrO2 had better tribological performance than the common Al2O3-ceramics in contact with wood-based materials. The tungsten carbide had better tribological performance than ceramics in tribological contact with wood flour/PE material. A well-marked difference occurred in various cutting materials/MDF frictional pair, but the differences in various cutting materials/PB frictional pair were insignificant. An increase of the normal force didn’t result in any significant decrease of the friction coefficient. An addition of ZrO2 in the Al2O3-ceramics could inhabit corrosive wear.
Style APA, Harvard, Vancouver, ISO itp.
5

Ndukwe, Agha Inya, Chukwuma Daniel Okolo i Benjamin Uchenna Nwadirichi. "Overview of corrosion behaviour of ceramic materials in molten salt environments". Zastita Materijala 65, nr 2 (15.06.2024): 202–12. http://dx.doi.org/10.62638/zasmat1128.

Pełny tekst źródła
Streszczenie:
This study reviewed previous studies between the years 2015 and 2021 on how ceramic materials degraded in the presence of molten salt environments. The processes of corrosion resistance of various ceramic compositions subjected to various molten salt compositions and temperatures were also scrutinized. The results offer important new insights into the variables affecting ceramics' corrosion behaviour and the production of corrosion products. The reported result reveals that the ceramic material with the composition (Sm0.5Sc0.5)2Zr2O7 performed better than that of Sm2Zr2O7 in terms of hot corrosion resistance in molten salt (V2O5 + Na2SO4). It has also been reported that corrosion behaviour is influenced by particle size. Notably, zirconia (n-YSZ) with nanoscale grain sizes was more susceptible to hot corrosion, which was explained by increased specific surface areas. On the other hand, sintering and additives have been found to enhance corrosion resistance. The Y-Y2Si2O7 ceramic's resistance to corrosion in (V2O5 + Na2SO4) molten salt was enhanced by the addition of alumina. The results of these investigations help us understand how corrosion works and what influences ceramic materials' susceptibility to deterioration in molten salt media. This information can direct the creation of more corrosive-resistant ceramic materials for use in high-temperature environments or molten salt-based energy systems, among other corrosive uses.
Style APA, Harvard, Vancouver, ISO itp.
6

Kajdas, C. K. "Tribochemistry of Selected Ceramic Materials". Solid State Phenomena 113 (czerwiec 2006): 339–47. http://dx.doi.org/10.4028/www.scientific.net/ssp.113.339.

Pełny tekst źródła
Streszczenie:
Ceramics, especially nitrides, oxides and carbides, offer advantages over conventional tribological mating elements. Such solids usually are very stable chemically. However, under friction conditions they become quite reactive. It is even possible to say that the friction and wear behavior of ceramics might be more sensitive to the environment than friction and wear behavior of metals. Considering the present trend towards the incorporation of these ceramics in tribological applications, the importance of a more comprehensive understanding of the ceramic surface physics and chemistry cannot be overestimated. The primary aim of this paper is to present some physicochemical factors that may influence the wear process of ceramics and account for some specific tribological findings related to lubrication of these materials from the view-point of a better understanding of their tribochemistry. Model of ceramic reaction with water, implying the effect of triboelectron emission process, leads to the generation of acidic and basic active sites. The model is mostly focused on silicon nitride tribochemistry. It accounts well for the formation of specific silicon compounds from silicon nitride lubricated with water and alcohols. The model is based on the emission process of low-energy electrons during friction with generation of positively charged sites (Si+) and free radicals (N●). Interaction of the emitted low-energy electrons with water or alcohol molecules (HOH, ROH) produces negative HO‾ or RO‾ ions, respectively and hydrogen radicals (H●). The described model provides a better understanding of silicon nitride tribochemistry than previous ones. The same is due to other ceramics.
Style APA, Harvard, Vancouver, ISO itp.
7

Voloschuk, D. S., V. V. Anisimov i N. A. Makarov. "CERAMIC MATERIALS BASED ON Al2O3 FOR LTCC APPLICATION". Steklo i Keramika, nr 12 (grudzień 2022): 21–26. http://dx.doi.org/10.14489/glc.2022.12.pp.021-026.

Pełny tekst źródła
Streszczenie:
In the paper presents an overview on the topic of obtaining high-temperature (HTCC) and low-temperature (LTCC) ceramics. The topic observe transition from a high-temperature process of obtaining ceramic materials to a low-temperature. Typical LTCC production process and the characteristics and properties of a “classic” glass ceramic composite described hereof. The main directions of application glass ceramics obtained by LTCC technology are shown.
Style APA, Harvard, Vancouver, ISO itp.
8

Supeliuk, T. M., i L. L. Maslennikova. "Ceramic Materials Using Oil Contaminated Soil". Materials Science Forum 1088 (18.05.2023): 67–71. http://dx.doi.org/10.4028/p-tuq6p9.

Pełny tekst źródła
Streszczenie:
The paper considers the possibility of utilization of oil-contaminated mineral waste when obtaining products of architectural and garden ceramics, or ceramic bricks. The aim of the study was to develop compositions of a ceramic charge, using oil-contaminated soil, in the form of loam and sand, instead of a weaker, that meet the requirements of state standards for operational characteristics. Optimal compositions and physical and mechanical characteristics of the obtained ceramic materials are presented. To study the composition of technogenic raw materials and the structure of synthesized ceramic materials, X-ray phase and differential thermal methods of analysis and atomic absorption spectrometry were used. An assessment of the environmental efficiency of utilization of oil-contaminated mineral waste is given, which shows a significant decrease in the anthropogenic load on the environment when obtaining ceramic products with improved operational characteristics.
Style APA, Harvard, Vancouver, ISO itp.
9

Denry, Isabelle L. "Recent Advances in Ceramics for Dentistry". Critical Reviews in Oral Biology & Medicine 7, nr 2 (kwiecień 1996): 134–43. http://dx.doi.org/10.1177/10454411960070020201.

Pełny tekst źródła
Streszczenie:
For the last ten years, the application of high-technology processes to dental ceramics allowed for the development of new materials such as heat-pressed, injection-molded, and slip-cast ceramics and glass-ceramics. The purpose of the present paper is to review advances in new materials and processes available for making all-ceramic dental restorations. Concepts on the structure and strengthening mechanisms of dental ceramics are provided. Major developments in materials for all-ceramic restorations are addressed. These advances include improved processing techniques and greater mechanical properties. An overview of the processing techniques available for all-ceramic materials is given, including sintering, casting, machining, slip-casting, and heat-pressing. The most recent ceramic materials are reviewed with respect to their principal crystalline phases, including leucite, alumina, forsterite, zirconia, mica, hydroxyapatite, lithium disilicate, sanidine, and spinel. Finally, a summary of flexural strength data available for all-ceramic materials is included.
Style APA, Harvard, Vancouver, ISO itp.
10

Sugiyama, Toyohiko, Keiji Kusumoto, Masayoshi Ohashi i Akinori Kamiya. "Environmental Friendly Ceramic Building Materials". Key Engineering Materials 690 (maj 2016): 150–55. http://dx.doi.org/10.4028/www.scientific.net/kem.690.150.

Pełny tekst źródła
Streszczenie:
The global warming is one of the most serious problems. The decrease of CO2 emissions in our daily life is an important subject today. Recently, an application of water retentive materials as a paving material has attracted a great deal of attention in Japan. This material is effective for reducing heat island phenomenon, which is also a recent problem in many cities in Japan. Water retained in the material during rainfall evaporates when heated by sunshine. The latent heat absorbed by evaporating water works to cool the surroundings. The water retentive ceramic products are expected to be useful for building materials as well as pavements. Several performances are required on the water retentive ceramics when it is used as building materials. Its cost and quality are the important factors. Porous ceramic materials formed by pressing without firing is one of ideal low cost and eco-friendly candidates. The porous ceramics is also expected to be produced from recycled ceramic materials. By optimizing its composition and forming method, a water retentive material with high performance was developed. The trial product had the properties as follows; fracture toughness: 1300N, bending strength: 175N/cm, water absorption: larger than 30%, and precision in size (length): +-0.5mm for 150mm. The product showed also enough frost resistance. In this paper, the fundamental properties of the porous ceramics prepared without firing are discussed with referring to the results of the field experiments.Another subject recently studied by several tile manufactures in Japan is the glazed tile with high solar reflectance. The exterior walls covered with such a high solar reflectance tile keeps the surface temperature of the wall lower under the strong sunshine of summer. It is effective against heat-island phenomenon. In this paper, the outline of the research results on visible and infrared reflectance of many kinds of glazes is also discussed.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Ceramic materials"

1

Adicks, Michael Kent. "Strength characterization of thin-wall hollow ceramic spheres from slurries". Thesis, Georgia Institute of Technology, 1989. http://hdl.handle.net/1853/9318.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Katti, Kalpana Shastri. "Microstructure and local dielectric function in barium titanate based electroceramics /". Thesis, Connect to this title online; UW restricted, 1996. http://hdl.handle.net/1773/10590.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Pemberton, Sonya Rachel. "Toughening ceramics : optimising the fracture behaviour of metallic fibre reinforced ceramic matrix composites (MFCs)". Thesis, University of Cambridge, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.607820.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Ceseracciu, Luca. "Contact Damage on Ceramic Laminates". Doctoral thesis, Universitat Politècnica de Catalunya, 2008. http://hdl.handle.net/10803/6057.

Pełny tekst źródła
Streszczenie:
La difusión de los materiales cerámicos en muchos campos de la industria es amplia y está en fuerte expansión, debido a las excelentes propiedades de estos materiales, ya sean mecánicas, térmicas, tribológicas o biológicas. Sin embargo, su fragilidad intrínseca y falta de fiabilidad limitan una mayor difusión en esas aplicaciones donde se precisa alta resistencia estructural. La producción de composites multilaminares es un camino prometedor para aumentar la fiabilidad de los cerámicos. Los cerámicos multicapa permiten que las propiedades mecánicas sean mejores que las de los componentes, debido a la presencia en la superficie de tensiones residuales de compresión provocadas diferencias de expansión térmica entre las capas.
Las aplicaciones óptimas de estos materiales son las que están relacionadas con las propiedades superficiales; por eso la respuesta a las cargas por contacto son especialmente importantes para caracterizar las propiedades mecánicas y para mejorar el diseño de cerámicos composites avanzados.
Las técnicas de indentación Hertziana son herramientas muy útiles para estudiar este tipo de carga, que por otro lado es difícil de caracterizar por ensayos mecánico tradicionales. El daño por contacto en materiales frágiles aparece principalmente como grietas anillo en la superficie, que pueden desarrollarse como grietas cono, características de este tipo de carga. Este agrietamiento es perjudicial para la funcionalidad del material, y puede llevar al fallo de la pieza. Las cerámicas tenaces, por otro lado, pueden presentar un daño, cuasi-plástico, que se genera debajo la superficie en forma de microagrietamento, y que es causa de deformación inelástica.
En esta tesis, se caracteriza la resistencia al daño por contacto materiales cerámicos en base alúmina, incluyendo todos los aspectos de ese daño, desde la aparición de fisuras superficiales, a la propagación de grietas frágiles en la primera capa y su influencia sobre la resistencia del material, hasta el fallo inducido por carga de contacto. Se comparan medidas experimentales con análisis a los Elementos Finitos de los parámetros involucrados en cada caso, lo que permite formular pautas para una correcta caracterización y diseño de cerámicas multicapas avanzados.
Se vio que la presencia de tensiones residuales es efectiva en mejorar la resistencia a la formación de grieta anillo, sea generada por cargas monotónicas, cíclicas o estáticas.
La alta resistencia frente a este último tipo de carga revela que existen mecanismos de puenteo intergranular que se oponen a la formación de grietas, lo que era inesperado por el tamaño de grano fino, y que se atribuye a un efecto de grieta corta, comparada con la microestructura. Ensayos cíclicos de larga duración mostraron, por otro lado, que en los materiales multicapas aparece daño superficial más severo que en los monolíticos, lo que sugiere un cambio del daño predominante hacía una degradación superficial producida por cuasi-plasticidad.
Las tensiones residuales afectan tanto la longitud como el ángulo de la grieta cono. Se modeló el problema mediante Elementos Finitos y algoritmos de propagación de grieta, lo que permitió predecir el crecimiento de grieta en función tanto de las tensiones residuales, como de otros parámetros microestructurales, y determinar del ángulo de la grieta cono en materiales policristalinos.
La respuesta a cargas remotas de materiales indentados, en otras palabras la degradación de la resistencia, se ve afectada por la geometría de la grieta cono, y por otros factores que son consecuencia de la estructura laminar, tales como las tensiones residuales y la redistribución de carga por el desajuste elástico entre capas. Asimismo, la resistencia por contacto, o sea la resistencia a compresión roma localizada, se ve mejorada en materiales laminares, como consecuencia de las tensiones residuales. Sin embargo, se evidenció que existe el riesgo de que se genere tensión elevada en las capas interiores bajo ambos tipos de carga, y se propusieron consideraciones generales sobre el diseño de materiales laminares.
En definitiva, se consiguió una caracterización exhaustiva de las propiedades de contacto mecánico de los materiales estudiados, y se amplió y mejoró el conocimiento de la propagación de grieta en materiales frágiles policristalinos.
The use of ceramic materials in many industrial fields is spread and ever-increasing, for their excellent properties, either mechanical, thermal, tribological or biological. However, their intrinsic brittleness and lack of reliability are obstacles to further spreading these materials in applications where structural resistance is required. To build multilayered composite structures is a promising way which aims to increase the reliability of ceramics. As it is common in composite materials, layered materials allow the mechanical properties to be superior to those of the constituent materials, in the studied case due to the presence of compressive residual stress in the surface.
The best applications for such materials are those related to the surface properties; for this reason the response to contact loading is especially important to characterize the mechanical properties and to assist in the design of advanced ceramic composites. Hertzian indentation techniques provide a powerful tool to study such type of loading, which is otherwise difficult to characterize with the traditional mechanical testing methodologies.
Contact damage in brittle materials appears mainly as surface ring-cracks, which can develop in a characteristic cone crack. Such fissuration is detrimental to the functionality of the material, and can lead to the failure of the component. Tough ceramics often present another type of damage, the so-called quasi-plasticity, generated as subsurface microcracking and which is cause of inelastic deformation.
In this thesis, alumina-based ceramic laminates were characterized in their resistance to contact damage in all its aspects, starting from the appearance of surface fissures, to the propagation of brittle cracks in the first layer and its influence on the material strength, to the contact loadinginduced failure. Experimental measurements were coupled with Finite Element analysis of the involved parameters, which assisted in formulating comprehensive guidelines for the correct characterization and the design of advanced multilayered ceramics.
The presence of residual stress in ceramic laminates proved to be effective in improving the material resistance to the ring cracking, generated by monotonic, cyclic and longlasting tests.
The better resistance to these latter revealed the existence of grain bridging hindering the crack formation, unexpected in fine-grained alumina and which was related to the small crack character of the ring crack. Longer lasting cyclic tests showed that more severe damage appears in the multilayered materials than in the monolithic one, suggesting a modification of the redominant damage mode to quasi-plastic-derived surface degradation.
Propagation of long cone cracks is affected by residual stress in both the length and angle. An automatic Finite Element model of crack propagation allowed to predict crack growth as a function of both the extrinsic residual stresses and of microstructural parameters, which helped address the long-open question of the cone crack angle on polycrystalline materials.
The response to remote loading of indented materials, in other words the strength degradation, is conditioned by the cone crack geometry, as well as by other factors deriving from the laminated structure, such as the presence of residual stress itself and the load redistribution due to the elastic mismatch between layers. Similarly, the contact strength, i.e. the resistance to local blunt compression, is improved in the composite materials as a consequence of the residual stresses. Nevertheless, the risk of high stress in the lower tensile layers was highlighted for both types of loading and general consideration on the design of laminated materials were proposed.
In the overall, a comprehensive characterization of the contact properties of the studied materials was achieved, and the understanding of crack propagation on brittle polycrystalline materials was broadened and improved.
Style APA, Harvard, Vancouver, ISO itp.
5

Stanciu, Lia Antoaneta. "Field assisted sintering of ceramic materials /". For electronic version search Digital dissertations database. Restricted to UC campuses. Access is free to UC campus dissertations, 2003. http://uclibs.org/PID/11984.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Louie, Beverly. "Permeation of fluids through ceramic materials". Thesis, University of Oxford, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259809.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Thoe, T. B. "Ultrasonic Contour Machining of Ceramic Materials". Thesis, University of Birmingham, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.525493.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Hassani, Seyed Khosrow Seyed. "Isostatic bonding of pressed ceramic materials". Thesis, Queen's University Belfast, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334709.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Kryvobok, R. V., G. Lisachuk, A. Zakharov, E. Fedorenko i M. Prytkina. "Development of radio transparent ceramic materials". Thesis, The American Ceramic Society, 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/26130.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Wallace, Andrew. "Cathodic precipitation of ceramic precursor materials". Thesis, Loughborough University, 1997. https://dspace.lboro.ac.uk/2134/10989.

Pełny tekst źródła
Streszczenie:
An electrochemical technique has been developed for the production of precursors to ceramic films on hydrogen sorbing metal substrates. It involves the electrolysis of aqueous metal salt solutions which yields hydrogen at the cathode, resulting in local generation of base (hydroxide ions) around this electrode. Such conditions promote the precipitation of metallic hydroxides from a suitable electrolyte. If the local alkaline environment is not disrupted by convective or other forces, then a solid phase accumulates near the cathode, and forms an adherent gel-like structure on its surface. In order to maintain deposition, it is essential that gaseous hydrogen evolution is minimised, and preferably eliminated. This can be achieved by use of a hydrogen sorbing cathode material, such as palladium. The electrode, and adherent film (or, in appropriate circumstances, the deposit alone) can then undergo a subsequent calcination treatment to yield the ceramic layer. It is possible to generate both porous and compact structures by this method, depending on the potential programme employed during deposition. Research has been conducted into the understanding of mechanisms involved in porosity control of films deposited during different potential regimes, with view to establishing routes to layers of predetermined physical structure. In-situ optical methods were employed to complement the electrochemical techniques, providing valuable insight into the initial mechanisms of film formation and the subsequent thickening processes. The utility of the precipitation process was illustrated by the fabrication of films which demonstrated a variable conductivity over a range of humidities appropriate to sensing application. Investigation into the use of a bipolar palladium electrode as an aid to generating thick film deposits was carried out. The device comprised a palladium plate, operated as a bipolar electrode in aqueous electrolyte. Under suitable conditions, the negative face of this electrode can be made to generate and absorb hydrogen, whilst simultaneously, the positive face oxidises hydrogen transported across the bipolar substrate by diffusion. Thus the cathode face is a non-gassing electrode on which thick deposits of metal hydroxide can be grown. This line of research lead to the realisation of a self-feeding hydrogen anode at the electrode's positive face. Further research was undertaken to assess the electrochemical properties of this anode. The effective operating window for hydrogen oxidation was investigated, and the effect of prolonged potential cycling, elevated temperature and bipolar plate thickness on this region was also considered.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Ceramic materials"

1

Pampuch, Roman. ABC of contemporary ceramic materials. Faenza, Italy: Techna Group, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Carter, C. Barry, i M. Grant Norton. Ceramic Materials. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-3523-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Boch, Philippe, i Jean-Claude Niepce, red. Ceramic Materials. London, UK: ISTE, 2007. http://dx.doi.org/10.1002/9780470612415.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Shi, Feng. Ceramic materials: Progress in modern ceramics. Rijeka, Croatia: InTech, 2012.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

R, Levine Stanley, red. Ceramics and ceramic-matrix composites. New York, N.Y: American Society of Mechanical Engineers, 1992.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Tiwari, Ashutosh, Rosario A. Gerhardt i Magdalena Szutkowska. Advanced Ceramic Materials. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119242598.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Tuan, Wei-Hsing, i Jing-Kun Guo, red. Multiphased Ceramic Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-642-18752-0.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Velde, Bruce, i Isabelle C. Druc. Archaeological Ceramic Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-59905-7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

J, De Renzo D., i Noyes Data Corporation, red. Ceramic raw materials. Park Ridge, N.J., U.S.A: Noyes Data Corp., 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Hamid, Mostaghaci, red. Advanced ceramic materials. Zuerich-Uetikon, Switzerland: Trans Tech Publications, 1996.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Ceramic materials"

1

Askeland, Donald R. "Ceramic Materials". W The Science and Engineering of Materials, 139–52. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0443-2_14.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Askeland, Donald R. "Ceramic Materials". W The Science and Engineering of Materials, 437–87. Boston, MA: Springer US, 1996. http://dx.doi.org/10.1007/978-1-4899-2895-5_14.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Askeland, Donald R. "Ceramic Materials". W The Science and Engineering of Materials, 160–73. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-009-1842-9_14.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Lyons, Arthur. "Ceramic materials". W Materials for Architects and Builders, 325–39. Sixth edition. | Abingdon, Oxon : Routledge, 2019.: Routledge, 2019. http://dx.doi.org/10.1201/9781351109550-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Carlson, R. L., G. A. Kardomateas i J. I. Craig. "Ceramic Materials". W Solid Mechanics and Its Applications, 41–43. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-4252-9_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Phillips, George C. "Ceramic Materials". W A Concise Introduction to Ceramics, 3–7. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-6973-8_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Maritan, Lara. "Ceramic Materials". W Archaeological Soil and Sediment Micromorphology, 205–12. Chichester, UK: John Wiley & Sons, Ltd, 2017. http://dx.doi.org/10.1002/9781118941065.ch25.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Wong-Ng, W. "Ceramic materials". W International Tables for Crystallography, 804–27. Chester, England: International Union of Crystallography, 2019. http://dx.doi.org/10.1107/97809553602060000982.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Götze, Jens, i Matthias Göbbels. "Ceramic Materials". W Introduction to Applied Mineralogy, 79–95. Berlin, Heidelberg: Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-64867-4_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Carter, C. Barry, i M. Grant Norton. "Raw Materials". W Ceramic Materials, 353–67. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-3523-5_19.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Ceramic materials"

1

Sanghera, Jasbinder, Brandon Shaw, Woohong Kim, Guillermo Villalobos, Colin Baker, Jesse Frantz, Michael Hunt, Bryan Sadowski i Ishwar Aggarwal. "Ceramic laser materials". W SPIE LASE, redaktorzy W. Andrew Clarkson, Norman Hodgson i Ramesh Shori. SPIE, 2011. http://dx.doi.org/10.1117/12.879521.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Reifsnider, Ken, i S. W. Case. "Life Prediction Based on Material State Changes in Ceramic Matrix Composite Materials". W ASME Turbo Expo 2007: Power for Land, Sea, and Air. ASMEDC, 2007. http://dx.doi.org/10.1115/gt2007-28167.

Pełny tekst źródła
Streszczenie:
Monolithic ceramics and continuous fiber reinforced ceramic composites are being developed for use in high temperature applications such as combustor liners in gas turbines, thrust deflectors for jet engines, and thruster nozzles. Ceramic composite materials possess the high temperature resistance properties of ceramics, but have better creep and cyclic properties. However, the properties of these materials change somewhat with time at service temperatures, i.e., their material state changes as a function of service conditions and history. The authors have developed a methodology for representing and combining the effects of high temperature material state changes in CMCs, along with changes in applied stress / strain conditions during service, to estimate remaining strength and life of ceramic composite materials and components. Fatigue, creep rupture, and time dependent deformation are combined by a strength metric in integral form to create a time-resolved, point-wise estimate of current remaining strength and life in material elements. Application of this methodology in discrete element representations of mechanical behavior of structural elements with nonuniform stress / strain states has been implemented.
Style APA, Harvard, Vancouver, ISO itp.
3

Kita, Hideki, Hideo Kawamura, Yasuaki Unno i Shigeo Sekiyama. "Low Frictional Ceramic Materials". W International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1995. http://dx.doi.org/10.4271/950981.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

van Roode, Mark, Oscar Jimenez, John McClain, Jeff Price, Vijay Parthasarathy, Kevin L. Poormon, Mattison K. Ferber i Hua-Tay Lin. "Ceramic Gas Turbine Materials Impact Evaluation". W ASME Turbo Expo 2002: Power for Land, Sea, and Air. ASMEDC, 2002. http://dx.doi.org/10.1115/gt2002-30505.

Pełny tekst źródła
Streszczenie:
Impact of foreign or domestic material on components in the hot section of gas turbines with ceramic components is a common cause of catastrophic failure. Several such occurrences were observed during engine testing under the Ceramic Stationary Gas Turbine program sponsored by the U.S. Department of Energy. A limited analysis was carried out at Solar Turbines Incorporated (Solar), which involved modeling of the impact in the hot section. Based on the results of this study an experimental investigation was carried out at the University of Dayton Research Institute Impact Physics Laboratory to establish the conditions leading to significant impact damage in silicon-based ceramics. The experimental set up involved impacting ceramic flexure bars with spherical metal particulates under conditions of elevated temperature and controlled velocity. The results of the study showed a better correlation of impact damage with momentum than with kinetic energy. Increased test specimen mass and fracture toughness were found to improve impact resistance. Continuous fiber-reinforced ceramic composite (CFCC) materials have better impact resistance than monolithics. A threshold velocity was established for impacting particles of a defined mass. Post-impact metallography was carried out at Oak Ridge National Laboratory to further establish the impact mechanism.
Style APA, Harvard, Vancouver, ISO itp.
5

Tanabe, Setsuhisa. "Ceramic and Glass Ceramic Phosphors for Solid State Lighting". W Advances in Optical Materials. Washington, D.C.: OSA, 2009. http://dx.doi.org/10.1364/aiom.2009.awd1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

LEVINE, STANLEY. "Ceramics and ceramic matrix composites - Aerospace potential and status". W 33rd Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-2445.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Smart, John, i Siu L. Fok. "Determining Failure Laws for Ceramic Materials". W ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/94-gt-085.

Pełny tekst źródła
Streszczenie:
For determining the failure probability of ceramic components in a varying stress field, there are many theories which are based on the Weibull “weakest-link” ideas. However, the difference between the predictions for many stress systems is small and because of the scatter in the failure loads for ceramic materials and the inevitable experimental errors, it has been difficult to decide which is most suitable. In this paper, a testing regime is described which spreads the predictions from the various theories to allow the most suitable theory for a given material to be chosen. This will give more confidence when designing with ceramics. Tests are also described on a reactor grade graphite and it is shown that of the theories examined the maximum non-coplanar strain energy release rate is the most suitable criterion although the results indicate that current ‘weakest-link’ ideas may not be suitable to describe all loading situations. Reasons for this are discussed.
Style APA, Harvard, Vancouver, ISO itp.
8

Yan, D. S., X. R. Fu i S. X. Shi. "Ceramic Materials and Components for Engines". W 5th International Symposium on Ceramic Materials and Components for Engines. WORLD SCIENTIFIC, 1995. http://dx.doi.org/10.1142/9789814533812.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

"Recycling of Ceramic Refractory Materials". W Nov. 18-19, 2019 Johannesburg (South Africa). Eminent Association of Pioneers, 2019. http://dx.doi.org/10.17758/eares8.eap1119230.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Falin, Priska. "Aesthetic experimentations on ceramic materials". W Nordes 2013: Experiments in Design Research. Nordes, 2013. http://dx.doi.org/10.21606/nordes.2013.075.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Ceramic materials"

1

Soules, T., B. Clapsaddle, R. Landingham i K. Schaffers. Ceramic Laser Materials. Office of Scientific and Technical Information (OSTI), luty 2005. http://dx.doi.org/10.2172/15015861.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Hagg, Sandra L., Thomas D. Ketcham, Pamela C. Merkel i LeRoy S. Share. Advanced Ceramic Armor Materials. Fort Belvoir, VA: Defense Technical Information Center, maj 1990. http://dx.doi.org/10.21236/ada223227.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Wilfinger, K. R. ,. LLNL. Ceramic materials testing and modeling. Office of Scientific and Technical Information (OSTI), kwiecień 1998. http://dx.doi.org/10.2172/674999.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Grady, D. E. Dynamic properties of ceramic materials. Office of Scientific and Technical Information (OSTI), luty 1995. http://dx.doi.org/10.2172/72964.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Grady, D. E., i J. L. Wise. Dynamic properties of ceramic materials. Office of Scientific and Technical Information (OSTI), wrzesień 1993. http://dx.doi.org/10.2172/10187138.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Davies, Peter K., Peter K. Davies i Robert S. Roth. Chemistry of electronic ceramic materials. Gaithersburg, MD: National Institute of Standards and Technology, 1991. http://dx.doi.org/10.6028/nist.sp.804.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Grinfeld, Michael, Scott E. Schoenfeld i Tim W. Wright. Toward Modeling Limited Plasticity in Ceramic Materials. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 2008. http://dx.doi.org/10.21236/ada486919.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Huang, Paul J., Clifford W. Hubbard, Gary A. Gilde i Jeffrey J. Swab. Evaluation and Characterization of Ceramic Bearing Materials. Fort Belvoir, VA: Defense Technical Information Center, marzec 1999. http://dx.doi.org/10.21236/ada361191.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Katz, R. N. Ceramic Materials for Rolling Element Bearing Applications,. Fort Belvoir, VA: Defense Technical Information Center, maj 1995. http://dx.doi.org/10.21236/ada297304.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Gutierrez, Gonzalo, i Walter Orellana. Thermophysical Modeling of Novel Machinable Ceramic Materials. Fort Belvoir, VA: Defense Technical Information Center, listopad 2009. http://dx.doi.org/10.21236/ada522473.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Ceramic materials” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii