Gotowa bibliografia na temat „Cemeti Art House”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Cemeti Art House”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Cemeti Art House"
1
Ngabito, Olivia Febrianty. "Pengelolaan Galeri Seni Langgeng Art Space dan Cemeti Art House di Yogyakarta". JURNAL TATA KELOLA SENI 6, nr 1 (8.07.2020): 43–52. http://dx.doi.org/10.24821/jtks.v6i1.4114.
Pełny tekst źródłaStreszczenie:
ABSTRAKBanyaknya galeri seni di Yogyakarta menjadi wadah berekspresi bagi seniman dan apresiasi bagi pengunjung galeri. Tentunya setiap galeri memiliki ciri khas dalam pengelolaannya, seperti halnya dengan Langgeng Art Space dan Cemeti Art House. Sama-sama galeri seni namun memiliki pengelolaan yang berbeda baik dari segi promosi, target, residensi, program, kolaborasi, SOP, kurator. Terdapat persamaan yang ada dalam kedua galeri tersebut yakni mereka tidak mengedepankan profit dalam hal jual beli karya yang dipamerkan melainkan, mengedepankan kualitas pada karya yang dipamerkan. Penelitian ini menggunakan metode penelitian kualitatif dengan data yang diperoleh melalui wawancara lalu dikoding untuk mengetahui jawaban pada penelitian. Langgeng Art Space merupakan galeri yang menerapkan sistem konsinasi dan untuk teknis pengaturannya mereka memiliki SOP sendiri sedangkan Cemeti Art House menggunakan sistem dalam operasionalnya melalui kerja sama antar sesama komunitas seni. Galeri ini tidak mempunyai acuan SOP serta tidak menyediakan kurator khusus. ABSTRACT A large number of art galleries in Yogyakarta is a place of expression for artists and appreciation for gallery visitors. Of course, each gallery has a characteristic in its management, as is the case with Langgeng Art Space and Cemeti Art House. Both art galleries but have different management both in terms of Promotion, Target, Residency, Program, Collaboration, SOP, Curator. There are similarities in the two galleries that they do not prioritize profit in terms of buying and selling the works on display but instead emphasizing the quality of the works on display. This study uses qualitative research methods with data obtained through interviews and then coded to find out the answers to the research. Langgeng Art Space is a gallery that implements a consensus system and for technical arrangements, they have their own SOPs while Cemeti Art House uses the system in its operations through collaboration between art communities. This gallery has no SOP references and does not provide special curators.
2
Gillin, Edward John. "Stones of Science: Charles Harriot Smith and the Importance of Geology in Architecture, 1834–64". Architectural History 59 (2016): 281–310. http://dx.doi.org/10.1017/arh.2016.9.
Pełny tekst źródłaStreszczenie:
AbstractIn mid nineteenth-century Britain, the study of geology involved radical new understandings of the earth's history. This had ramifications for architecture, providing new ways of seeing stone and designing buildings. This article examines the works of stone-mason Charles Smith. Following the destruction of the Houses of Parliament in 1834, the government initiated a national survey to select a stone for Britain's new legislature. Alongside geologists Henry De la Beche and William Smith, Charles Smith toured the buildings and quarries of Britain, producing a report that was intended to guide not only the choice of stone at Westminster, but all future architectural projects. He spent the following two decades promoting geological knowledge for architectural work. His reading of texts that examined the earth's geological formation, such as Charles Lyell's, shaped new understandings of stone and cement. This article demonstrates how, in a rapidly industrialising society, geology and architecture became increasingly inseparable.
3
Caggiano, Antonio, Christoph Mankel i Eddie Koenders. "Reviewing Theoretical and Numerical Models for PCM-embedded Cementitious Composites". Buildings 9, nr 1 (21.12.2018): 3. http://dx.doi.org/10.3390/buildings9010003.
Pełny tekst źródłaStreszczenie:
Accumulating solar and/or environmental heat in walls of apartment buildings or houses is a way to level-out daily temperature differences and significantly cut back on energy demands. A possible way to achieve this goal is by developing advanced composites that consist of porous cementitious materials with embedded phase change materials (PCMs) that have the potential to accumulate or liberate heat energy during a chemical phase change from liquid to solid, or vice versa. This paper aims to report the current state of art on numerical and theoretical approaches available in the scientific literature for modelling the thermal behavior and heat accumulation/liberation of PCMs employed in cement-based composites. The work focuses on reviewing numerical tools for modelling phase change problems while emphasizing the so-called Stefan problem, or particularly, on the numerical techniques available for solving it. In this research field, it is the fixed grid method that is the most commonly and practically applied approach. After this, a discussion on the modelling procedures available for schematizing cementitious composites with embedded PCMs is reported.
4
Rozenberg, Natalia. "A NON-CLASSICAL CLASSIC, A LOOK AT THE ART OF S. ERZYA (1876-1959) FROM THE 21 ST CENTURY". Herald of Culturology, nr 3 (2021): 71–82. http://dx.doi.org/10.31249/hoc/2021.03.05.
Pełny tekst źródłaStreszczenie:
For the first time in Russian art history, the article attempts to show the integrity of the art of the Russian-Argentine sculptor S. Erzya on the basis of an art history analysis of his most famous works created in Italy, Russia and Argentina. The features of his personal and creative development are revealed in the context of socio-cultural events, which were distinguished by a stormy, sometimes catastrophic nature. The youthful ideals of Tolstoyism in the mind of a mature master acquire the features of a worldview that asserts the priority of the ideals of moral and spiritual perfection, the devotion to which was almost invariably paid with the price of life. A documentary confirmation of Erziʼs words is given in the entry of his secretary, L. Orsetti. People who knew Erza intimately in Italy, Russia, and Argentina also wrote about their commitment to these ideals. The theme of sacrifice, the suffering path unites both his biblical works and things of revolutionary themes. Their success is described in the article not only on the basis of periodicals, but also for the first time with the involvement of exhibition catalogues. In Argentina, Erzya created monumental portraits of the spiritual leaders of mankind - these portraits by the sculptor himself were collected in a special exhibition in his house: Moses, Beethoven, Tolstoy, N. Gogol. The motives of beauty and birth, the continuation of the human race are embodied by Erzya in the famous female images «Nude», «Eve», «Motherhood», «Dance». The plastic beauty and the mystery of the transformation of the female body fascinated the audience at the exhibitions of the sculptor's works and were evidence of the change in his somatic perception in Argentina. Thus, in the art of Erzi in Argentina, the intuition and emotional supernormality inherent in the cultural consciousness of Latin Americans are manifested. The sculptor's attitude to the material he chose for a particular work was dictated by the concept. His rare ability to work in any material - cement, marble, bronze, wood-makes him stand out among modern sculptors. He followed the Michelangelo tradition in the processing of the marble block and became the only master to conquer the hard species of tropical trees. Today it is obvious that the legacy of the sculptor-thinker Erzya is not fully appreciated.
5
Romanova, O. V. "NATIONAL FEATURES OF TRADITIONAL RESIDENTIAL ARCHITECTURE IN THE BUDJAK REGION". Problems of theory and history of architecture of Ukraine, nr 20 (12.05.2020): 203–10. http://dx.doi.org/10.31650/2519-4208-2020-20-203-210.
Pełny tekst źródłaStreszczenie:
Most of the homes in the Budzhak region are interesting historical and architectural sites and deserve attention. Considering their current state, one can see the manifestation of a number of architectural features: well-established national traditions, authorship of folk craftsmen, the influence of academic art, historical architectural styles (Romanesque, Gothic, Renaissance, Baroque, Classicism, Modernist), as well as the features of serial time. The unifying factor is, on the one hand, the similarity of ideological and creative thoughts and the desire of folk craftsmen to give a compositional and stylistic integrity to the whole object-space environment of the manor (in particular, in the exterior and interior of a dwelling house), on the other-ethnic identity manifests itself perfectly recognizable through ornamental motifs and forms by elements of certain national symbols. The article deals with the national features of the traditional residential architecture of Budzhak Ukrainians, Russians, Bulgarians, Romanians, Moldavians, Gagauzians, Germans, selected for research as the most numerous in the national composition of Budzhak (southern Bessarabia) according to the population censuses from 1822 to 2001. Budzhak's national composition is presented in pie charts. The national identity of the compositional features and decorative and artistic means of expressing the dwellings of Budzhak, in particular its central regions (Saratov and Tatarbunar regions of Odessa region) of the given ethnic groups of the population is revealed. In general, the main large volumes and forms of traditional residential buildings are the construction of walls and roofs. Picturesque volumetric compositions acquire buildings with a combined type of roof that is used to cover the intersecting several volumes of the building, the kind with roofs with artistically decorated attic windows, located both in the plane of the roof slope and on the pediment of the main front. The subjects of detailed consideration and research are: ornamental-plastic decor made of cement, brick, lime, metal. Artistic carving -on wood and metal. Artistic forging, as a rule, has common compositional features with the architecture of the home and the estate as a whole. The entrance to the apartment house is decidedly representative and colorful enough. Borrowing and imitating natural counterparts (prototypes), folk craftsmen have created unique works that clearly reflect interethnic and religious-everyday contacts, professional borrowings, family traditions and the achievements of modern times.Photographic examples of dwellings typical of nationality (the second half of the XIX –the second half of the twentieth century) are given. The collected photos are dated 2015, 2017, 2018. Numerous photo materials of the respective states were considered by the author for the identification of houses by nationality: Ukraine, Russia, Moldavia, ATO Gagauzia, Romania, Germany, Bulgaria. The resulting comparative tables and schemes of ethnic influences are quite large in volume and can therefore be illustrated and analyzed in the next article by the author. However, the features noted briefly atthis stage made it possible to draw some conclusions, which made it possible to distinguish the typical residential homes of the studied national groups from the vast number of mixed types characteristic of the South of Ukraine as a historical and ethnographic region as a whole. The distinctive features of the dwellings of Budzhak Ukrainians, Russians, Bulgarians, Romanians, Moldavians, Gagauzians, Germans are considered and detailed, places of decorative and color accents in the general composition of estates are revealed. Tradition is a form of translation of social experience in the philosophical sense. This or that type of stage borrowing of any object that evolves, including culture, is possible provided that the old goes into the new and works in it productively. Tradition acquires the features of stability when it becomes flexible, dynamic, able to absorb the best qualities of artistic cultures of other nations and groups, and also as a result of self-development. A comprehensive study of the featuresof traditional residential architecture provides the basis for the scientific substantiation of restoration works and the unveiling of the tourist potential of Budzhak. Taking into account the multifaceted architectural forms of residential objects, both geographical and sociocultural, it is possible to identify not only the visual and morphological features of traditional residential buildings of different ethnic groups, but also the semantic structure of the image of traditional architecture, which meansto develop certain techniques for the use of ethnic styles. houses for the future. The obtained factual material of this scientific article can be implemented in a wide range of architectural and design activities, as well as cultural, ethno-cultural and art-science practices.
6
Aguirre, María Alejandra, Stefan Luding, Luis A. Pugnaloni i Rodrigo Soto. "Editorial: Powders & Grains 2021 9th International Conference on Micromechanics of Granular Media". EPJ Web of Conferences 249 (2021): 00001. http://dx.doi.org/10.1051/epjconf/202124900001.
Pełny tekst źródłaStreszczenie:
Granular matter, particulate matter and granular materials are generic terms to refer to systems composed of many macroscopic bodies (grains or particles) where the contact interaction (which is non-conservative) plays a crucial role in the behavior of the system. This contrasts with other systems (e.g., atomic or molecular systems) where the constituent bodies (e.g., atoms or molecules) interact via conservative forces. The non-conservative contact interactions come from inelastic collisions (due to plastic deformation, sound or heat production) and also from friction. This makes the study of granular matter a major challenge to scientists and the handling/storage/processing of granular materials a major challenge to engineers. Particulate matter covers a very broad range of systems, from those formed by fine particles (powders) to those formed by large rocks (derbis), from soft bodies (cotton balls) to hard grains (glass beads), from those we eat (muesli) to those we play with (beach sand), from those used to build our houses (cement) to those used to grow our crops (soil). Needless to say, any new knowledge in this area has a tremendous potential to impact our lives and our economy. Powders & Grains is a conference held every four years to bring together researchers working both in fundamental aspects of granular matter and in technological applications. This volume collects the 195 papers presented during the 2021 edition of P&G, which provide an excellent overview of the current state-of-the-art in granular matter and new trends with contributions form six continents.
7
Vamsi Krishna, B., i E. Rakesh Reddy. "Applications of green materials for the preparation of eco-friendly bricks and pavers". International Journal of Engineering & Technology 7, nr 3.29 (24.08.2018): 75. http://dx.doi.org/10.14419/ijet.v7i3.29.18465.
Pełny tekst źródłaStreszczenie:
The most basic and primary building material for construction of houses is the conventional brick. The rapid growth in today’s construction industry has obliged the civil engineers in searching for more efficient and durable alternatives far beyond the limitations of the conventional brick production [1-2]. A number of studies have been made and serious steps have been taken in manufacturing of bricks from several waste materials. However, the traditional mean of bricks production which has brought hazardous impacts to the context has not yet been changed or replaced by more efficient and sustainable one [3], [4]. Most of the researches went through enhancing the clay brick quality and properties by mixing the clay with various recycled wastes as foundry sand, granite sawing waste, harbour sediments, perlite, sugarcane, baggase ash, clay waste and fine waste of boron, sewage sludge, waste glass from structural wall and other different wastes. Compile this state of the art work of manufacturing bricks in the past and the current trend in the bricks industry with respect to the raw materials, ways of manufacturing and the out- comings.This project presents an experimental study on the utilization of waste materials which replaces clay with (Plastic covers, Ceramic Powder, Egg Shell Powder, GGBS, Silica Fume, Rice Husk Ash and Lime Powder) and Fine Aggregate with (Recycled glass, Dry Grass, Dead Leaves, Tree barks powder, Sugar cane powder, crumbed rubber) to produce eco-friendly Bricks. This project is an attempt to fill the gap of the past studies and suggest more sustainable and sophisticated methods of brick manufacturing in the future. 40 percent replacement of fine aggregate with crumbled rubber and dry grass in mortar bricks have given encouraging results, also the replacement of cement by egg shell powder at 20% has given a considerable result
8
Turer, Ahmet. "Conservation of Heritage Structures in Turkey: Practice and Difficulties". Advanced Materials Research 133-134 (październik 2010): 31–42. http://dx.doi.org/10.4028/www.scientific.net/amr.133-134.31.
Pełny tekst źródłaStreszczenie:
Conservation studies in developing countries might have additional problems to those that are being experienced by leading developed countries. The problems and difficulties mentioned here do not reflect the common practice in Turkey and mostly list rare cases for information purposes. Countries located in Asia and Middle East have rich structural heritage, in number and significance, which are sometimes even a few millenniums old. On the other hand, often times financial or bureaucratic constraints make the conservation studies more difficult, while technical problems remain to be an issue. It is quite interesting that sometimes having available financial support for conservation studies turns out to be the main source of problem, since quick and not well thought interventions end up damaging hundreds of years old surviving structures, rather than conserving them. Other most common application problems include use of Portland cement in humid environments causing salt contamination (which is now widely being avoided), infilling and freezing cracks that used to work as seasonal water table movement based motion or thermal expansion joints that are cyclic in nature, covering the structure to protect but forming unintentional green house effect – micro climates forming fungus, improper drainage to cause support settlements, removing earth fill or structural members to cause structural movements and cracks, strengthening parts of a flexible structure only to make it more rigid and cause to attract more earthquake forces, disable its energy dissipating mechanisms, applying improper chemicals, using incompatible material or irreversible techniques etc. are just a few to mention. The problem solution strategies in conservation studies should include internationally accepted conservation rules. Multi disciplinary teams are always recommended since combination of various expertise areas are mutually needed in conservation studies; architects, geotechnical and structural engineers, geology and material science specialists, archeologists, art historians are among the most important team members. Analytical modeling and simulations, on-field non destructive testing, instrumented monitoring (SHM), and small scale field treatment tests are recommended to be merged and used in conservation studies, because conventional methods or commercial repair/treatment materials available over-the-counter may not always suitable for a given specific case. Reversibility, minimum intervention, and respect to authenticity should be among the main principles to avoid serious conservation problems.
9
Pospíšil, Richard. "Expenses connected with disposing of animals with bovine spongiform encephalopathy in selected rendering plant in the Czech Republic". Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 57, nr 3 (2009): 133–40. http://dx.doi.org/10.11118/actaun200957030133.
Pełny tekst źródłaStreszczenie:
The first case of bovine spongiform encephalopathy (BSE) in the Czech Republic appeared in 2001 and since that a total of 28 infected cows have been detected. Two outbreaks of BSE in 2007 and no diseased animal in 2008 confirms that, in the Czech Republic, the disease incidence has a decreasing trend, which is in an agreement with the situation in other EU countries. According to the Veterinary Act No. 166/1999, farmers with BSE disease are indemnified from the state budget. The state, therefore, significantly contributes to the prevention and mitigation of BSE and ensures epidemiologic health in our country. Between the outbreak in 2001 and 2008, a total of 1 311 473 cows were examined and, based on the finding of 28 BSE-positive animals, 4 022 cows were subsequently slaughtered. BSE examination, killing and decontamination costs amounted to 18.9 million CZK, compensation costs for killed animals reached almost 163.9 million CZK and compensation for unaccomplished production accounted for over 13.6 million CZK. Together with other additional costs, the total financial compensations paid out during the period of BSE presence were almost 198 million CZK. A separate budget is proportioned to subsequent safe disposing of carcasses in rendering plants. The rendering plant “Asanace, spol. s r. o., Zichlinek“ was appointed by the State Veterinary Administration to perform the disposal of carcasses. Since the beginning of 2003 to 2008, 22 cases of BSE were reported and 3 572 cows were killed and destroyed there, what represents 2 221 tons of material . The cost of processing of 1 kg of waste material ranged from 3.50 CZK to 6.50 CZK, total costs reached 9.315 thousand CZK. The final product – meat and bone meal – was incinerated in a cement factories at a cost of 1 CZK per 1 kg between years 2003–2006, now it is free of charge. This study does not include costs of disposal of Specific Risk Material, because it is covered by slaughter houses, that are the source of this material.
10
Gemenetzi, Katerina, Andreas Agathangelidis, Fotis Psomopoulos, Karla Plevova, Lesley-Ann Sutton, Kostas Pasentsis, Achilles Anagnostopoulos i in. "Higher Order Restrictions of the Immunoglobulin Repertoire in CLL: The Illustrative Case of Stereotyped Subsets #2 and #169". Blood 134, Supplement_1 (13.11.2019): 5453. http://dx.doi.org/10.1182/blood-2019-128017.
Pełny tekst źródłaStreszczenie:
Stereotyped subset #2 (IGHV3-21/IGLV3-21) is the largest subset in CLL (~3% of all patients). Membership in subset #2 is clinically relevant since these patients experience an aggressive disease irrespective of the somatic hypermutation (SHM) status of the clonotypic immunoglobulin heavy variable (IGHV) gene. Low-throughput evidence suggests that stereotyped subset #169, a minor CLL subset (~0.2% of all CLL), resembles subset #2 at the immunogenetic level. More specifically: (i) the clonotypic heavy chain (HC) of subset #169 is encoded by the IGHV3-48 gene which is closely related to the IGHV3-21 gene; (ii) both subsets carry VH CDR3s comprising 9-amino acids (aa) with a conserved aspartic acid (D) at VH CDR3 position 3; (iii) both subsets bear light chains (LC) encoded by the IGLV3-21 gene with a restricted VL CDR3; and, (iv) both subsets have borderline SHM status. Here we comprehensively assessed the ontogenetic relationship between CLL subsets #2 and #169 by analyzing their immunogenetic signatures. Utilizing next-generation sequencing (NGS) we studied the HC and LC gene rearrangements of 6 subset #169 patients and 20 subset #2 cases. In brief, IGHV-IGHD-IGHJ and IGLV-IGLJ gene rearrangements were RT-PCR amplified using subgroup-specific leader primers as well as IGHJ and IGLC primers, respectively. Libraries were sequenced on the MiSeq Illumina instrument. IG sequence annotation was performed with IMGT/HighV-QUEST and metadata analysis conducted using an in-house, validated bioinformatics pipeline. Rearrangements with identical CDR3 aa sequences were herein defined as clonotypes, whereas clonotypes with different aa substitutions within the V-domain were defined as subclones. For the HC analysis of subset #169, we obtained 894,849 productive sequences (mean: 127,836, range: 87,509-208,019). On average, each analyzed sample carried 54 clonotypes (range: 44-68); the dominant clonotype had a mean frequency of 99.1% (range: 98.8-99.2%) and displayed considerable intraclonal heterogeneity with a mean of 2,641 subclones/sample (range: 1,566-6,533). For the LCs of subset #169, we obtained 2,096,728 productive sequences (mean: 299,533, range: 186,637-389,258). LCs carried a higher number of distinct clonotypes/sample compared to their partner HCs (mean: 148, range: 110-205); the dominant clonotype had a mean frequency of 98.1% (range: 97.2-98.6%). Intraclonal heterogeneity was also observed in the LCs, with a mean of 6,325 subclones/sample (range: 4,651-11,444), hence more pronounced than in their partner HCs. Viewing each of the cumulative VH and VL CDR3 sequence datasets as a single entity branching through diversification enabled the identification of common sequences. In particular, 2 VH clonotypes were present in 3/6 cases, while a single VL clonotype was present in all 6 cases, albeit at varying frequencies; interestingly, this VL CDR3 sequence was also detected in all subset #2 cases, underscoring the molecular similarities between the two subsets. Focusing on SHM, the following observations were made: (i) the frequent 3-nucleotide (AGT) deletion evidenced in the VH CDR2 of subset #2 (leading to the deletion of one of 5 consecutive serine residues) was also detected in all subset #169 cases at subclonal level (average: 6% per sample, range: 0.1-10.8%); of note, the 5-serine stretch is also present in the germline VH CDR2 of the IGHV3-48 gene; (ii) the R-to-G substitution at the VL-CL linker, a ubiquitous SHM in subset #2 and previously reported as critical for IG self-association leading to cell autonomous signaling in this subset, was present in all subset #169 samples as a clonal event with a mean frequency of 98.3%; and, finally, (iii) the S-to-G substitution at position 6 of the VL CDR3, present in all subset #2 cases (mean : 44.2% ,range: 6.3-87%), was also found in all #169 samples, representing a clonal event in 1 case (97.2% of all clonotypes) and a subclonal event in the remaining 5 cases (mean: 0.6%, range: 0.4-1.1%). In conclusion, the present high-throughput sequencing data cements the immunogenetic relatedness of CLL stereotyped subsets #2 and #169, further highlighting the role of antigen selection throughout their natural history. These findings also argue for a similar pathophysiology for these subsets that could also be reflected in a similar clonal behavior, with implications for risk stratification. Disclosures Sutton: Abbvie: Honoraria; Gilead: Honoraria; Janssen: Honoraria. Stamatopoulos:Abbvie: Honoraria, Research Funding; Janssen: Honoraria, Research Funding. Chatzidimitriou:Janssen: Honoraria.
Rozprawy doktorskie na temat "Cemeti Art House"
1
Ingham, Susan Helen School of Art History & Theory UNSW. "Powerlines: alternative art and infrastructure in Indonesia in the 1990s". Awarded by:University of New South Wales. School of Art History and Theory, 2007. http://handle.unsw.edu.au/1959.4/31257.
Pełny tekst źródłaStreszczenie:
This thesis investigates why an alternative visual art and arts infrastructure developed in Indonesia during the 1990s. Initially alternative exhibition spaces developed in response to a lack of outlets through the existing commercial galleries and in reaction to the cultural hegemony of Suharto???s regime, which failed to provide infrastructure for modern art. ???Alternative??? will be extended here to describe an art and an arts infrastructure that became an influential system of power, the gatekeeper for the Indonesian arts community to the international art forum. The background of Alternative art is considered, its sources being in the protest of the New Art Movement, Gerakan Seni Rupa Baru, in the 1970s and an on-going art student rebellion against the modern and decorative art taught in the art academies. Contemporary artists sought content that reflected the many issues confronting Indonesian society, and rejected that art focusing on formal properties particularly in painting, which, by avoiding contention, served the purposes of Suharto???s regime. Particular examples are explored to define the lines of power that evolved: firstly the alternative gallery, Cemeti, and secondly the curator, Jim Supangkat and his theoretical justification for Indonesian contemporary art for the international forum. Finally the career structure of Heri Dono is examined to identify the mechanisms for artistic success through international contacts. This investigation concludes that power and influence became dependent on recognition in the international forum. Western and later Asian institutions, in selecting work for the high profile survey exhibitions proliferating in the 1990s, worked almost exclusively with this network. Their preference was for installation art that reflected the socio-political context in which it was made, and the few artists who were selected developed careers very different from their colleagues in Indonesia, some becoming nomadic art stars. This relationship between the Indonesian and the international art network has gained recognition for Indonesian contemporary art and an outlet for suppressed issues and marginalised people, but did not provide a fully balanced representation of Indonesian culture and reiterated the systems and paradigms of the West in relation to Asian art.
Książki na temat "Cemeti Art House"
1
United States. Congress. House. Committee on Energy and Commerce. Subcommittee on Energy and Power. H.R. 2250, the EPA Regulatory Relief Act of 2011, and H.R. 2681, the Cement Sector Regulatory Relief Act of 2011: Hearing before the Subcommittee on Energy and Power of the Committee on Energy and Commerce, House of Representatives, One Hundred Twelfth Congress, first session, September 8, 2011. Washington: U.S. G.P.O., 2012.
Znajdź pełny tekst źródła
2
15 years Cemeti Art House: Exploring vacuum, 1988-2003. Wyd. 2. Yogyakarta: Cemeti Art House, 2003.
Znajdź pełny tekst źródłaCzęści książek na temat "Cemeti Art House"
1
Roach, Levi. "Introduction". W Forgery and Memory at the End of the First Millennium, 1–20. Princeton University Press, 2021. http://dx.doi.org/10.23943/princeton/9780691181660.003.0001.
Pełny tekst źródłaStreszczenie:
This introductory chapter provides an overview of medieval forgery. In the European Middle Ages, the most common form of forgery was the manufacture of false documents. Indeed, the period has, with some justification, been seen as a golden age of documentary forgery, a time before modern means of criticism, when the counterfeit was king. Well over half of the surviving diplomas in the names of the Merovingian Frankish rulers of mainland Europe are products of forgery; a third of the charters of the Lombard rulers of northern Italy are suspect; and over a third of the documents from pre-Conquest England have been tampered with in some way. The defining feature of these early fakes is a desire to use the past to cement current claims. It is no coincidence that most of them belong to religious houses. In ancient Egypt and the Middle East, as in medieval Europe, the religious classes were specialists in literacy, some of the few capable of presenting and recording complex claims in written form. They also possessed a strong sense of corporate identity (like the later medieval clergy), which encouraged the creation of such false narratives.
2
Sakhlecha, Manish, Samir Bajpai i Rajesh Kumar Singh. "Evaluating the Environmental Impact Score of a Residential Building Using Life Cycle Assessment". W Research Anthology on Environmental and Societal Well-Being Considerations in Buildings and Architecture, 142–59. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-9032-4.ch006.
Pełny tekst źródłaStreszczenie:
Buildings consume major amount of energy as well as natural resources leading to negative environmental impacts like resource depletion and pollution. The current task for the construction sector is to develop an evaluation tool for rating of buildings based on their environmental impacts. There are various assessment tools and models developed by different agencies in different countries to evaluate building's effect on environment. Although these tools have been successfully used and implemented in the respective regions of their origin, the problems of application occur, especially during regional adaptation in other countries due to peculiarities associated with the specific geographic location, climatic conditions, construction methods and materials. India is a rapidly growing economy with exponential increase in housing sector. Impact assessment model for a residential building has been developed based on life cycle assessment (LCA) framework. The life cycle impact assessment score was obtained for a sample house considering fifteen combinations of materials paired with 100% thermal electricity and 70%-30% thermal-solar combination, applying normalization and weighting to the LCA results. The LCA score of portland slag cement with burnt clay red brick and 70%-30% thermal-solar combination (PSC+TS+RB) was found to have the best score and ordinary Portland cement with flyash brick and 100% thermal power (OPC+T+FAB) had the worst score, showing the scope for further improvement in LCA model to include positive scores for substitution of natural resources with industrial waste otherwise polluting the environment.
3
Skinner, H. Catherine W., Malcolm Ross i Clifford Frondel. "What Is an Inorganic Fiber?" W Asbestos and Other Fibrous Materials. Oxford University Press, 1989. http://dx.doi.org/10.1093/oso/9780195039672.003.0004.
Pełny tekst źródłaStreszczenie:
Fibers are everywhere around us. They are essential parts of the human body, our hair, for example; the threads in our clothing, natural or synthetic; the insulation in our houses. Natural fibers have been useful to humans for more than ten thousand years. They were mixed with clay before firing to strengthen and reinforce pottery vessels, making them more durable. Textiles that combined the fibers of flax and asbestos were known in ancient times for their seemingly magical resistance to fire and decay. It was industrialization, however, that caused a dramatic increase in the use of natural inorganic or mineral fibers. By the late nineteenth century asbestos had become an important commodity with a variety of commercial applications. It served as insulation to control heat generated by engines and, because of its incombustibility, as a fire retardant in its more recent general use as building insulation. Asbestos fibers are found worldwide in many products: as reinforcement in cement water pipes and the inert and durable mesh material used in filtration processes of chemicals and petroleum, for example. However, asbestos is not the only inorganic fiber in use today. Synthetic inorganic fibers abound. Glass fibers have replaced copper wire in some intercontinental telephone cables. Fiberglas (a trade name) has become the insulation material of choice in construction. Carbon and graphite fiber composites are favored materials for tennis racket frames and golf clubs. Fibrous inorganic materials have become commonplace in our everyday lives. As the use of inorganic fibers increased, there were some indications that fibers might be hazardous to our health. Since the first century A.D. it was suspected that asbestos might be the cause of illness among those who mined and processed the material. Asbestosis, a debilitating and sometimes fatal lung disorder, was documented and described in the nineteenth century. Within the last 25 years, lung cancer and mesothelioma have also been linked to asbestos exposure among construction and textile workers, as well as others exposed to dusts containing asbestos fibers. Although the etiology and specific mechanisms that give rise to these two cancers are not yet understood, concern for the health of exposed workers led the governments of the United States and other countries to specify the maximum allowable concentrations of asbestos in the ambient air of the workplace.
4
"of the key producers to emerge from the early 1990s wave of American independent cinema, Ted Hope has shepherded nearly 70 lms in his career and continues to work in the arty indie arena as the new head of the San Francisco Film Society (SFFS). He started his career in the New Line Cinema mailroom and cut his teeth on low-budget horror lms in and around New York City. The lm to cement his place among the “fast-and-cheap” lmmakers set was Hal Hartley’s The Unbelievable Truth (1989), on which Hope has a rst assistant director credit. Hope went on to work on some of the most seminal indies of the decade, including Todd Haynes’ Safe (1995), Ed Burns’ The Brothers McMullen (1995), Nicole Holofcener’s Walking and Talking (1996), and Ang Lee’s The Ice Storm (1997). Hope began his relationship with Lee on the director’s early 1990s lms Pushing Hands (1992) and The Wedding Banquet (1993). That time also marked the beginning of Hope’s longtime partnership with producer and now Focus Features CEO James Schamus. The duo went on to found Good Machine, a production and later foreign sales company that stood among the New York indie scene’s vanguard. The company was sold to Universal in 2002. Hope, under his new production banner This Is That, continued to make lms with Schamus, under a deal with Focus, and others. He has made it a habit to discover new lmmakers and went on to make multiple lms with many, including Lee, Holofcener, and Todd Solondz, with whom he made Happiness (1998), Storytelling (2001), and Dark Horse (2011). Among Hope’s lms to have collected Academy Award nominations are Tamara Jenkins’ The Savages (2007); Todd Field’s In the Bedroom (2001); and Alejandro González Iñárritu’s 21 Grams (2003), on which he served as executive producer. Hope also has been a prolic blogger and frequent lecturer on topics including the future of independent lm and how digital delivery and social media are transforming cinema. At the SFFS, Hope will continue to shepherd lmmakers and forge new pathways for their work to be seen." W FilmCraft: Producing, 61–62. Routledge, 2013. http://dx.doi.org/10.4324/9780240823881-20.
Pełny tekst źródłaStreszczenia konferencji na temat "Cemeti Art House"
1
Kozłowski, Aleksander, Tomasz W. Siwowski i Tomasz Kozłowski. "Low-cost affordable single family housing in Poland. Light steel frame as an alternative construction solution". W IABSE Congress, New York, New York 2019: The Evolving Metropolis. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2019. http://dx.doi.org/10.2749/newyork.2019.0228.
Pełny tekst źródłaStreszczenie:
<p>Conventional single family houses in Poland are being built in the improved traditional construction technology with massive load-bearing structure created by masonry walls made of ceramic , silicate or aerated concrete blocks, concrete foundations, concrete rib-and-slab floor and pitched timber or concrete flat roof. Expanded polystyrene and mineral wool are being used as thermal insulation. Such solution is very time- consuming and costly due to more and more expensive manpower. The change in economy from communism to free market caused the beginning of modern thinking about construction technology for family house to be light, eco-friendly, innovative and low-cost. The definition of the term “affordable” in relation to single family housing, as well as the socio-economical background for the low-cost housing in Poland is presented. The paper presents proposal of low-cost family house construction built in light steel frame technology. The supporting structure is composed of steel frame made of cold-formed galvanized C shape profiles. Externally the steel frame is covered with cement bonded particle boards, covered with polystyrene insulation and finishing coat according to ETICS system. From the inside the steel frame is covered with plasterboards. The main thermal insulation of the building is created by mineral wool filling the interior spaces of walls, ceiling and roof panels. Comparison of the total construction costs of a 136 sq m building made in light steel frame technology with buildings of identical dimensions made in other, popular and available traditional technologies showed that a steel technology is approx. 10-20 percent cheaper. The paper presents also the comparison of the low-cost model steel structure houses worked out in Czech Republic, Portugal, Romania and Brazil, including technical parameters, structure type and cost of erection.</p>
2
Khalifeh, Mahmoud, Saeed Salehi, Aleksandra Jamrozik, Raymos Kimanzi i Saeid Abdollahpour. "Nano-Modified Rock-Based Geopolymers As Supplement to Portland Cement for Oil Well Cementing". W ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/omae2019-95380.
Pełny tekst źródłaStreszczenie:
Abstract Geopolymers being inorganic polymers, pumpable, gaining compressive strength, bonding to steel and formation, and showing durability at downhole conditions make them a possible barrier material. However, having low tensile strength, and being contaminated severely with water-based fluids are the challenges to be mitigated. These challenges have also been observed in recently developed rock-based geopolymers. Different researchers have suggested the application of nanoparticles as additive to geopolymers for increasing the mechanical properties. Of these one could list nanosilica, nano titanium di-oxide, nanocarbon graphene, carbon nanotubes, and nano aluminium. However, their reasoning for utilization of these nano particles originated from their effect on properties of Portland cement. In this study, the effect of nano titanium di-oxide and nanocarbon graphene is considered on the rock-based geopolymers. The two main criteria for selection of these materials are in-house availability, and the published prior art. The effect of the nano materials on rheological behavior, mechanical strength and microstructure of the geopolymers are the main investigated parameters. The obtained result shows that the nano materials improve the pumpability of the geopolymers but not improving the tensile strength effectively.
3
Wang, John Jy-An, Ken C. Liu i Dan Naus. "A New Test Method for Determining the Strength and Fracture Toughness of Cement Mortar and Concrete". W ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77034.
Pełny tekst źródłaStreszczenie:
The Spiral Notch Torsion Fracture Toughness Test (SNTT) was developed recently to determine the intrinsic fracture toughness (KIC) of structural materials. The SNTT system operates by applying pure torsion to uniform cylindrical specimens with a notch line that spirals around the specimen at a 45° pitch. KIC values are obtained with the aid of an in-house developed three-dimensional finite-element computer code, TOR3D-KIC. The SNTT method is uniquely suitable for testing a wide variety of materials used extensively in pressure vessel and piping structural components and weldments. Application of the method to metallic, ceramic, and graphite materials has been demonstrated. One important characteristic of SNTT is that neither a fatigue precrack nor a deep notch are required for the evaluation of brittle materials, which significantly reduces the sample size requirement. In this paper we report results for a Portland cement-based mortar to demonstrate applicability of the SNTT method to cementitious materials. The estimated KIC of the tested mortar samples with compressive strength of 34.45 MPa was found to be 0.19 MPa √m.
4
Boxmeer, Rolf van, i Tessa Peters. "LIQUID CITIES, a city designed by citizens". W International Conference on the 4th Game Set and Match (GSM4Q-2019). Qatar University Press, 2019. http://dx.doi.org/10.29117/gsm4q.2019.0028.
Pełny tekst źródłaStreszczenie:
‘The city of Sofronia is composed of two half cities. One is a large roller coaster with steep bumps, a whirligig with fanning chains, a Ferris wheel with rotating containers, a cylinder with steep wall riders with their heads down, a circus tent with a bunch of trapezes in the ridge. The other half of the city is made of stone and marble and cement, with a bank building, workshops, residential houses, the slaughterhouse, the school and everything else. One half of the city is huge, the other is improvised and when the time of the stay is up, it is taken apart, dismantled and taken to be transferred to the wasteland of another half city’ __Invincible cities, Italo Calvino Rezone wants to make the concept of the city more liquid.. A city where things can change, a flexible city that adapts to the desires of its inhabitants. A city designed by professionals, but also by its citizens. A city where roles are fluid and change. Where the designer becomes the builder, where the builder becomes the adviser, where the citizen becomes the designer. A constant flux and change of roles and structures. Rezone creates open designs, methods and strategies where the influence of the end user is big. With new technologies, it is possible to create personalized designs and methods for everybody. For rezone, experimentation is an important aspect of the working flow. Rolf van Boxmeer has a background in architecture and Tessa Peters has a background in the arts. The crossover of art and architecture brings new insights and is an activist methods and designs that can change the status quo in different urban fields.
5
Zhang, Jingzhou, Charlie Yongpravat, Marc D. Dyrszka, William N. Levine, Thomas R. Gardner i Christopher S. Ahmad. "Effect of Implant Shape and Material Properties on Stresses in the Glenoid Components of Total Shoulder Arthroplasties: A Finite Element Analysis". W ASME 2010 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2010. http://dx.doi.org/10.1115/sbc2010-19494.
Pełny tekst źródłaStreszczenie:
The geometry of the glenohumeral joint is osseous, naturally nonconforming and minimally constrained, thus the essential requirement of a glenohumeral prosthesis in total shoulder arthroplasty (TSA) is prevention of joint degeneration and glenoid loosening. A variety of glenoid prostheses have been developed. Nonconforming glenohumeral implants are common for TSA. However, the nonconforming shape increases the instability when the humeral head is in the central region, where motion frequently occurs. Conforming implants can increase joint stability, but the “rocking-horse” effect [1] caused by the conforming shape is thought to lead to high stresses and moments at the glenoid rim when the humeral head approaches the periphery during its range of motion. The hybrid design, with a conforming center and a nonconforming periphery, combines the advantages of both nonconforming and conforming implant geometries. It has been shown [2] that the peak stress generated in glenoid components during activities of daily living can be as high as 25 MPa, which exceeds the polyethylene yield strength of the glenoid component and can lead to wear and cold flow of the component. Polyethylene has also been shown to be viscoelastic [3]. Therefore, both elastic-plastic and viscoelastic-plastic models of the glenoid implant were used to determine how viscoelasticity affected stress in the implant. The effects of implant shape on the stresses in the center, transition, and superior zones for the three different glenoid implant shapes, as well as on the stress in the underlying cement and bone, were determined in this study.
6
Cantinelli Sevillano, Lucas, Jesus De Andrade i Sigbjørn Sangesland. "Estimation of Undisturbed Geothermal Gradient in Wells From Measured Drilling Data: A Numerical Approach". W ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/omae2017-62205.
Pełny tekst źródłaStreszczenie:
The undisturbed geothermal gradient is a key thermal boundary that drives heat transfer processes occurring in oil and gas wells throughout their lifetime. However, the temperature distribution with depth is somewhat uncertain, and this is often assumed to be a linear approximation from the mudline to the bottom of the well. During drilling, the circulating temperature may significantly affect the rheology of the drilling fluids and the cement setting processes. Therefore, erroneous estimates of the wellbore temperature may affect the overall performance of the drilling phase and subsequent well operations. Further, it is important to know the accurate temperature distribution within the formation for assessment of the petroleum prospectivity through source rock maturation and reservoir quality. This paper presents a numerical methodology to estimate the undisturbed geothermal gradient while drilling in offshore wells. This methodology may also be applied to onshore wells by simplification. The new approach is based on an in-house axisymmetric wellbore transient thermal model, in which the equations are solved using the finite difference method. The model computes the heat transfer between the well and riser system with the surroundings. However, other computational codes may also be used following the framework presented in this study. The computer code should provide a detailed representation of the geometry of the wellbore, the physical properties of the drilling fluid and formation, the suitable thermal boundary conditions and temporal discretization. The temperatures of the fluid at the inlet of the drillstring and at the bottom hole assembly (BHA), in the annulus A, are used as input to the numerical model that iteratively adjusts the undisturbed geothermal gradient, which generated the temperature recordings while drilling. The paper comprises cases studies of hypothetical wells drilled in relevant offshore areas in the world, each with their distinctive and variable geothermal gradient, defined by the different rock formations encountered. Uncertainties regarding the thermal properties of the rock were also considered to ascertain the robustness of the code. The water depth of the drilling site was also observed to impact the convergence of the algorithm. The results obtained by the numerical approach are in good agreement with the expected values of the undisturbed formation temperatures. The novelty of the numerical framework is the ability to provide reliable and satisfactory estimates of the undisturbed geothermal gradient for wellbores with any configuration, lithology and rock properties. These estimates are based on temperature measurements of the circulating drilling fluid at the BHA and account for uncertainty in rock thermal properties; in reasonable time using standard engineering computers.
7
Khan, Muhammad Zafar, Shantanu Swadi, Richard T. Caminari, Timothy A. Burdett i Graham Stronach. "Solving Dual Casing Zonal Isolation with the Deployment of a New Well Abandonment System. Rock-to-Rock Barriers Sets for Major Operators". W SPE/IADC Middle East Drilling Technology Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/202180-ms.
Pełny tekst źródłaStreszczenie:
Abstract The Plug and Abandonment (P&A) requirement stipulates a permanent barrier to be placed for restoring the cap rock during well abandonment. For a single casing, section milling has been successfully implemented and widely used for a number of years. For a dual casing string, this becomes particularly challenging when both casing strings are cemented. Conventional techniques require milling the entire inner casing from the top of cement followed by section milling the outer casing. This could require milling up thousands of feet on of the inner string and is not a cost-efficient solution. The service company has been heavily involved in a number of P&A campaigns, where the requirement was to come up with a solution for dual casing section milling. This paper discusses the design, technology, field runs and best practices developed to overcome this operational and economic challenge and save rig time in P&A operations. The challenge was to design a robust section mill that can drift through the inner casing restriction and expand to a high ratio to mill the outer casing. It was equally critical to manage shock and vibrations during the milling operation, ensure stability and, competitive ROP without incurring tool damage. To solve the operational and economic challenges, a unique system was developed to reduce the rig time. The system is a combination of the newly engineered high-ratio hydraulic section mill, with a 180% expansion ratio and a precisely oriented hydraulic stabilizer below it. This creates a unique 6-point stabilization system that helps to maintain the dynamic loads and vibrations to a manageable level. The system allows for a dual casing section window in few trips as compared to conventional techniques. In the first run, a window in the inner casing is milled by a section mill. During the second run, the High-Expansion Ratio Section Mill (HRSM) is run through the restriction, and mill the entire casing. A high ratio under reamer can be included in the bottom hole assembly to clean the section and expose the formation prior to the cementing operation. This completes achieving a rock-to-rock barrier in a dual cemented casing application. The new HRSM system has so far been 100% successful on the five challenging jobs completed in Europe, Asia and the Middle East, resulted in significant rig-time savings along with the added benefits of fewer trips and less swarf at the surface. Two sizes have been developed and tested for 7"x9-5/8" and 9-5/8"x13-3/8" applications. The success during the early jobs is largely due to the robustness of the mill design, proper pre-job planning, meticulous execution, and implementation of key learnings from in-house and prior field tests.