Gotowa bibliografia na temat „Cellulose fibres”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Cellulose fibres”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Cellulose fibres"
Ouajai, Sirisart, Peerachai Ruangwilairat, Kitti Ongwongsakul, Thanawadee Leejarkpai i Robert A. Shanks. "Morphology and Structure of Modified Oil Palm Empty Fruit Bunch Cellulose Fibre". Advanced Materials Research 93-94 (styczeń 2010): 607–10. http://dx.doi.org/10.4028/www.scientific.net/amr.93-94.607.
Pełny tekst źródłaFernando, Sarah, Chamila Gunasekara, Amin Shahpasandi, Kate Nguyen, Massoud Sofi, Sujeeva Setunge, Priyan Mendis i Md Tareq Rahman. "Sustainable Cement Composite Integrating Waste Cellulose Fibre: A Comprehensive Review". Polymers 15, nr 3 (19.01.2023): 520. http://dx.doi.org/10.3390/polym15030520.
Pełny tekst źródłaManian, Avinash P., Sophia Müller, Doris E. Braun, Tung Pham i Thomas Bechtold. "Dope Dyeing of Regenerated Cellulose Fibres with Leucoindigo as Base for Circularity of Denim". Polymers 14, nr 23 (2.12.2022): 5280. http://dx.doi.org/10.3390/polym14235280.
Pełny tekst źródłaFuckerer, Katharina, Oliver Hensel i Joachim J. Schmitt. "Rye Bread Fortified With Cellulose and Its Acceptance by Elderlies in Nursing Homes and Young Adults". Journal of Food Studies 5, nr 1 (27.01.2016): 1. http://dx.doi.org/10.5296/jfs.v5i1.8847.
Pełny tekst źródłaStevulova, Nadezda, Viola Hospodarova, Vojtech Vaclavik, Tomas Dvorsky i Tomas Danek. "Characterization of cement composites based on recycled cellulosic waste paper fibres". Open Engineering 8, nr 1 (10.11.2018): 363–67. http://dx.doi.org/10.1515/eng-2018-0046.
Pełny tekst źródłaSumithra, Murugesan, i Gayathri Murugan. "Extraction and characterization of natural fibres form Elettaria Cardamomum". Tekstilna industrija 69, nr 2 (2021): 30–33. http://dx.doi.org/10.5937/tekstind2102030s.
Pełny tekst źródłaSobczak, L., A. Limper, H. Keuter, K. Fischer i A. Haider. "Polypropylene-cellulose Innovative Compounding Technology". Polymers from Renewable Resources 3, nr 1 (luty 2012): 27–32. http://dx.doi.org/10.1177/204124791200300103.
Pełny tekst źródłaŠtevulova, Nadežda, Viola Hospodárova i Adriana Eštoková. "Study of Thermal Analysis of Selected Cellulose Fibres". GeoScience Engineering 62, nr 3 (1.12.2016): 18–21. http://dx.doi.org/10.1515/gse-2016-0020.
Pełny tekst źródłaManian, Avinash Pradip, Barbara Paul, Helene Lanter, Thomas Bechtold i Tung Pham. "Cellulose Fibre Degradation in Cellulose/Steel Hybrid Geotextiles under Outdoor Weathering Conditions". Polymers 14, nr 19 (5.10.2022): 4179. http://dx.doi.org/10.3390/polym14194179.
Pełny tekst źródłaUllrich, Julia, Martin Eisenreich, Yvonne Zimmermann, Dominik Mayer, Nina Koehne, Jacqueline F. Tschannett, Amalid Mahmud-Ali i Thomas Bechtold. "Piezo-Sensitive Fabrics from Carbon Black Containing Conductive Cellulose Fibres for Flexible Pressure Sensors". Materials 13, nr 22 (16.11.2020): 5150. http://dx.doi.org/10.3390/ma13225150.
Pełny tekst źródłaRozprawy doktorskie na temat "Cellulose fibres"
Hernandez, Zurine. "Conditions required for spinning continuous fibres from cellulose nano-fibrils". Thesis, Edinburgh Napier University, 2012. http://researchrepository.napier.ac.uk/Output/5286.
Pełny tekst źródłaYeoh, Sang Ju. "Electrospun cellulose fibres from kraft pulp". Thesis, University of British Columbia, 2009. http://hdl.handle.net/2429/12930.
Pełny tekst źródłaBengtsson, Andreas. "Carbon fibres from lignin-cellulose precursors". Licentiate thesis, KTH, Träkemi och massateknologi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-244756.
Pełny tekst źródłaDet ligger i människans natur att hitta lösningar på komplexa tekniska problem, samt att alltid sträva efter förbättringar. Utvecklingen av nya material är inget undantag. Ett av flera material utvecklade av människan är kolfiber. Dess utmärkta mekaniska egenskaper samt låga densitet har gjort det attraktivt som förstärkningsmaterial i lättviktskompositer. Det höga priset på kolfiber, vilket härstammar ur en kostsam framställningsprocess, har förhindrat en mer utbredd användning i exempelvis bilindustrin. Det dominerande råmaterialet för kolfiberframställning är petroleumbaserad polyacrylonitril (PAN). Användandet av fossila råvaror och det höga priset på kolfiber förklarar den starka drivkraften att hitta billigare och förnyelsebara alternativ. Lignin och cellulosa är förnyelsebara makromolekyler som finns tillgängliga i stora kvantiteter. Det höga kolinnehållet i lignin gör det mycket attraktivt som råvara för kolfiberframställning, men dess heterogena struktur ger en kolfiber med otillräckliga mekaniska egenskaper. Däremot har cellulosa en molekylär orientering som är önskvärd vid framställning av kolfiber, men dess låga kolinehåll ger ett lågt processutbyte som i sin tur bidrar till höga produktionskostnader. Det här arbetet visar att många av de problem som uppstår med kolfiber från respektive råvara kan kringgås genom att utgå från blandningar av desamma. Prekursorfibrer från blandningar av kraftlignin och kraftmassa från barrved tillverkade med luftgapsspinning konverterades till kolfiber. Utbytet för kolfibrerna som framställdes var mycket högre än vid framställning från endast cellulosa. Ofraktionerat barrvedslignin och kraftmassa av papperskvalitet presterade lika bra som de dyrare retentatligninen och dissolvingmassan, vilket är fördelaktigt ur ett ekonomiskt perspektiv. Stabilisering är det mest tidskrävande processteget i kolfibertillverkning. I det här arbetet visades det att prekursorfibrerna kunde stabiliseras på kortare än två timmar, eller direktkarboniseras utan någon sammansmältning av fibrerna. Detta indikerar att en tidseffektiv produktion kan vara möjligt. Impregnering av prekursorfibrerna med ammoniumdivätefosfat ökade utbytet avsevärt, men med lägre mekaniska egenskaper som bieffekt. Kolfibrernas mekaniska egenskaper ökade vid en diameterreduktion. En kort oxidativ stabilisering under två timmar i kombination med tunna prekursorfibrer gav kolfiber med en elasticitetsmodul på 76 GPa och dragstyrka på 1070 MPa. Att göra kolfiber från blandningar av lignin och cellulosa är ett lovande koncept om det höga utbytet (39%), den korta stabiliseringstiden samt de lovande mekaniska egenskaperna tas i beaktande.
QC 20190226
Li, Yingjie. "Emulsion electrospinning of nanocrystalline cellulose reinforced nanocomposite fibres". Thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/30474.
Pełny tekst źródłaSolberg, Daniel. "Adsorption kinetics of cationic polyacrylamides on cellulose fibres and its influence on fibre flocculation". Licentiate thesis, KTH, Fibre and Polymer Technology, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-1665.
Pełny tekst źródłaThe adsorption of cationic polyacrylamide (C-PAM) and silicananoparticles onto a model surface of silicon oxide wascompared with the adsorption of C-PAM to fibres and theirinfluence on flocculation of a fibre suspension. An increase inionic strength affects the polyelectrolyte adsorption indifferent ways for these two systems. With the silica surface,an increase in the ionic strength leads to a continuousincrease in the adsorption. However, on a cellulose fibre, theadsorption increases at low ionic strength (1 to 10 mM NaCl)and then decreases at higher ionic strength (10 to 100 mMNaCl). It was shown that the adsorption of nanoparticles ontopolyelectrolyte-covered surfaces has a great effect on both theadsorbed amount and the thickness of the adsorbed layer. Theresults showed that electrostatic interactions were thedominating force for the interaction between both the fibresand the polyelectrolytes, and between the polyelectrolytes andthe silica particles. Furthermore, at higher NaClconcentrations, a significant non-ionic interaction between thesilicon oxide surface/particles and the C-PAM was observed.
The adsorption rate of C-PAM onto fibres was rapid andquantitative adsorption was detected in the time range between1 and 8 s at polyelectrolyte addition levels below 0.4 mg/g.Conversely, an increase in the amount of added polymer leads toan increased polymer adsorption up to a quasi-static saturationlevel. However, after a few seconds this quasi-staticsaturation level was significantly lower than the level reachedat electrostaticequilibrium. The adsorbed amountof charges at full surface coverage after 1 to 8 s contact timecorresponded to only 2 % of the total fibre charge, whereasafter 30 minutes it corresponded to 15 % of the total fibrecharge. This shows that a full surface coverage at shortcontact times is not controlled by surface charge. Based onthese results, it is suggested that a combination of anon-equilibrium charge barrier against adsorption and ageometric restriction can explain the difference between theadsorption during 1 to 8 s and the adsorption after 30 minutes.With increasing time, the cationic groups are neutralised bythe charges on the fibre as the polyelectrolyte reconforms to aflat conformation on the surface.
The addition of a high concentration of C-PAM to a fibresuspension resulted in dispersion rather than flocculation.This behaviour is most likely due to an electrostericstabilisation of the fibres when the polyelectrolyte isadsorbed. Flocculation of the fibre suspension occurred at lowadditions of C-PAM. A maximum in flocculation was found ataround 50 % surface coverage and dispersion occurred above 100% surface coverage. It was also shown that for a given level ofadsorbed polymer, a difference in adsorption time between 1 and2 seconds influenced the flocculation behaviour. An optimum inflocculation at 50 % surface coverage in combination with theimportance of polymer reconformation time at these shortcontact times showed that the C-PAM induced fibre flocculationagrees with La Mer and Healys description of bridgingflocculation.
A greater degree of flocculation was observed with theaddition of silica nanoparticles to the fibre suspension thanin the single polyelectrolyte system. Flocculation increased asa function of the concentration of added nanoparticles until0.5 mg/g. At higher additions the flocculation decreased againand this behaviour is in agreement with an extended model formicroparticle-induced flocculation. An increase in flocculationwas especially pronounced for the more extended silica-2particles. This effect is attributed to the more extendedpolyelectrolyte layer, since the adsorbed amount wasessentially the same for both silica particles.
Finally it was found that fines from the wood fibres had asignificant effect on the flocculation. When fines were added,a greater degree of flocculation was detected. Furthermore, itwas also more difficult to redisperse the fibres with polymerin the presence of fines.
Keywords:Adsorption, bridging, cationic polymers,cellulose fibres, electrosteric stabilisation flocculation,ionic strength, nanoparticle, polyelectrolyte, reconformation,retention aids and silica
Ulfstad, Louise. "Rheological study of cellulose dissolved in aqueous ZnCl2 : Regenerated cellulosic fibres for textile applications". Thesis, Karlstads universitet, Fakulteten för hälsa, natur- och teknikvetenskap (from 2013), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-28781.
Pełny tekst źródłaQi, Haisong, Jianwen Liu, Yinhu Deng, Shanglin Gao i Edith Mäder. "Cellulose fibres with carbon nanotube networks for water sensing". Royal Society of Chemistry, 2014. https://tud.qucosa.de/id/qucosa%3A36157.
Pełny tekst źródłaGaffiot, Lauric. "Optimisation d’un procédé d’élaboration d’un composite à base de fibres naturelles". Thesis, Université Grenoble Alpes (ComUE), 2017. http://www.theses.fr/2017GREAI056.
Pełny tekst źródłaNowadays, composite materials are a challenging and dynamic thematic for both industry and academic research. In this context, natural fibres are an interesting alternative to synthetic fibres thanks to their high mechanical properties, low density and biosourced origins in order to meet the requirements in terms of performance, costs and durability.This work take part into an industrial project that include research laboratories, suppliers and end-users. It aims at developing a unidirectional flax fibre composite material for sport and recreation application. The initial objectives of development focused on the surface optimization and the reinforcement, and the improvement of fibre-matrix adhesion. An original strategy has been set, based on the reactivity and the physico-chemical properties of métapériodate oxidized xyloglucan. This molecule has shown a promising effect of reinforcement on cellulosic materials, particularly in wet conditions. Besides, its reactivity with compatibilization agents allows different functionalization possibilities to increase fibre-matrix adhesion, encouraging its use as a coupling agent.The characterizations led on the different scales of flax fibre validated this strategy, as micro-mechanical tests showed adhesion improvement and mechanical properties of wet fibres had significantly increased. However, further mechanical investigations rose numerous experimental issues, and demonstrated that the specific morphology of these objects as well as their natural origins were major obstacles to measures exploitation in this kind of development project. So, the main research axis then focused on directly composite materials.Different structural problematics has been thus identified. Natural fibre impregnation, which can be influenced by treatments composition and elaboration process, has revealed itself has an important parameter linked to the multi-scale organization of flax. The fibre orientation in the unidirectional ply has been also identified as a key parameter that is affected by reinforcement architecture and industrial process of treatment.Those developments on treatments and composite structure led to a great increase of the material tensile properties to reach 30 GPa modulus and 370 MPa in strength, also improving its water ageing behaviour and its flexion ultimate strain. These promising enhancements are not sufficient in terms of overall mechanical performance and elaboration process to envisage an industrialization phase, but the prototyping of finished products will be realized
Devallencourt, Leriche Christine. "Caractérisation physico-chimiques de celluloses recyclées, de résines mélamine formaldéhyde et de composites résine/cellulose". Rouen, 1997. http://www.theses.fr/1997ROUES055.
Pełny tekst źródłaDoineau, Estelle. "Modification de fibres de lin par des nanocristaux de cellulose et du xyloglucane pour le développement de composites biosourcés hiérarchiques Adsorption of xyloglucan and cellulose nanocrystals on natural fibres for the creation of hierarchically structured fibres Hierarchical thermoplastic biocomposites reinforced with flax fibres modified by xyloglucan and cellulose nanocrystals Development of Bio-Inspired Hierarchical Fibres to Tailor the Fibre/Matrix Interphase in (Bio)composites". Thesis, IMT Mines Alès, 2020. http://www.theses.fr/2020EMAL0007.
Pełny tekst źródłaThis thesis project aims at developing flax fibres surface treatment for the improvement of the mechanical properties of biocomposites with polymeric matrix and flax reinforcements. This surface modification is inspired by the hierarchical structures present in biological systems (bone, nacre or wood), composed of nano-objects which allow a better transfer of loads in these materials. This presence of nano-sized objects makes it possible to reach impressive strength and toughness values and to limit cracks propagation. In this project, products derived from lingo-cellulosic biomass, namely cellulose nanocrystals (CNC) and xyloglucan (XG), were chosen for their interesting properties and mutual affinity to create hierarchical flax fibres. In a first step, the adsorption of XG and CNC onflax fibres w as localized and quantified using fluorescent markers. In addition, atomic force microscopy measurements of adhesive force revealed the creation of an extensible XG/CNC netw ork on the fibre surface. Subsequently, two paths were proposed with the elaboration of thermoplastic (polypropylene/flax fibres) and thermoset (epoxy resin/flax fabric) biocomposites using these nanostructured fibres. In both cases, an increase of the work of rupture has been measured by micro-and/or uniaxial tensile tests, allowing dissipating more energy upon breakage. All this work has allowed evaluating the potential of different hierarchical natural reinforcements (unidirectional fabric or short flax fibers) for the development of structural biocomposites with a focus on the fiber/matrix interphase zone
Książki na temat "Cellulose fibres"
Calvin, Woodings, i Textile Institute (Manchester England), red. Regenerated cellulose fibres. Boca Raton, FL: CRC Press, 2001.
Znajdź pełny tekst źródłaSfiligoj Smole, Majda, Silvo Hribernik, Manja Kurečič, Andreja Urbanek Krajnc, Tatjana Kreže i Karin Stana Kleinschek. Surface Properties of Non-conventional Cellulose Fibres. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-10407-8.
Pełny tekst źródłaCellulosic materials: Fibers, networks, and composites. Boston, Mass: Kluwer Academic Publishers, 2002.
Znajdź pełny tekst źródłaPeltonen, Petri. Asphalt mixtures modified with tall oil pitches and cellulose fibres. Espoo, Finland: VTT, Technical Research Centre of Finland, 1992.
Znajdź pełny tekst źródłaS, Kaith B., Kaur Inderjeet i SpringerLink (Online service), red. Cellulose Fibers: Bio- and Nano-Polymer Composites: Green Chemistry and Technology. Berlin, Heidelberg: Springer-Verlag Berlin Heidelberg, 2011.
Znajdź pełny tekst źródłaVares, Sirje. Cellulose fibre concrete. Espoo, Finland: Technical Research Centre of Finland, 1997.
Znajdź pełny tekst źródłaSimončič, Barbara. Biodegradation of cellulose fibers. New York: Nova Science Publishers, 2010.
Znajdź pełny tekst źródłaBarbara, Simončič, red. Biodegradation of cellulose fibers. Hauppauge, N.Y: Nova Science Publishers, 2009.
Znajdź pełny tekst źródłaArnaud, Lejeune, i Deprez Thibaut, red. Cellulose: Structure and properties, derivatives and industrial uses. Hauppauge, N.Y: Nova Science Publishers, 2009.
Znajdź pełny tekst źródłaSuleman, A. U. M. AFM studies of cellulosic fibres. Manchester: UMIST, 1996.
Znajdź pełny tekst źródłaCzęści książek na temat "Cellulose fibres"
Prado, Karen S., Asaph A. Jacinto i Márcia A. S. Spinacé. "Cellulose Nanostructures Extracted from Pineapple Fibres". W Pineapple Leaf Fibers, 185–234. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1416-6_10.
Pełny tekst źródłaThomas, S., S. A. Paul, L. A. Pothan i B. Deepa. "Natural Fibres: Structure, Properties and Applications". W Cellulose Fibers: Bio- and Nano-Polymer Composites, 3–42. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-17370-7_1.
Pełny tekst źródłaAdusumalli, Ramesh Babu, Karthik Chethan Venkateshan i Wolfgang Gindl-Altmutter. "Micromechanics of Cellulose Fibres and Their Composites". W Wood is Good, 299–321. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3115-1_28.
Pełny tekst źródłaNortholt, M. G. "The Similarity Between Cellulose and Aramid Fibres". W Integration of Fundamental Polymer Science and Technology, 567–72. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4185-4_70.
Pełny tekst źródłaSfiligoj Smole, Majda, Silvo Hribernik, Manja Kurečič, Andreja Urbanek Krajnc, Tatjana Kreže i Karin Stana Kleinschek. "Structure and Properties of Non-conventional Cellulose Fibres". W SpringerBriefs in Molecular Science, 49–59. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-10407-8_4.
Pełny tekst źródłaWendler, Frank, Thomas Schulze, Danuta Ciechanska, Ewa Wesolowska, Dariusz Wawro, Frank Meister, Tatiana Budtova i Falk Liebner. "Cellulose Products from Solutions: Film, Fibres and Aerogels". W The European Polysaccharide Network of Excellence (EPNOE), 153–85. Vienna: Springer Vienna, 2012. http://dx.doi.org/10.1007/978-3-7091-0421-7_6.
Pełny tekst źródłaSrinivasababu, Nadendla, i Kopparthi Phaneendra Kumar. "Synthesis of Nanocellulose Fibrils/Particles from Cellulose Fibres Through Sporadic Homogenization". W Lecture Notes in Mechanical Engineering, 893–902. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5463-6_79.
Pełny tekst źródłaRamesh, M., i C. Deepa. "Properties of Cellulose Based Bio-fibres Reinforced Polymer Composites". W Biofibers and Biopolymers for Biocomposites, 71–89. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-40301-0_3.
Pełny tekst źródłaLee, Y. A. "Case Study of Renewable Bacteria Cellulose Fiber and Biopolymer Composites in Sustainable Design Practices". W Sustainable Fibres for Fashion Industry, 141–62. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0522-0_6.
Pełny tekst źródłaLee, Koon-Yang, Anne Delille i Alexander Bismarck. "Greener Surface Treatments of Natural Fibres for the Production of Renewable Composite Materials". W Cellulose Fibers: Bio- and Nano-Polymer Composites, 155–78. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-17370-7_6.
Pełny tekst źródłaStreszczenia konferencji na temat "Cellulose fibres"
Hospodarova, Viola, Nadezda Stevulova, Vojtech Vaclavik, Tomas Dvorsky i Jaroslav Briancin. "Cellulose Fibres as a Reinforcing Element in Building Materials". W Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.104.
Pełny tekst źródłaStevulova, Nadezda, i Viola Hospodarova. "Cellulose Fibres Used in Building Materials". W Advanced HVAC and Natural Gas Technologies. Riga: Riga Technical University, 2015. http://dx.doi.org/10.7250/rehvaconf.2015.031.
Pełny tekst źródłaMissaoui, Mohamed, Evelyne Mauret, Mohamed Naceur Belgacem, Alberto D’Amore, Domenico Acierno i Luigi Grassia. "RETENTION OF CATIONIC STARCH ONTO CELLULOSE FIBRES". W IV INTERNATIONAL CONFERENCE TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2008. http://dx.doi.org/10.1063/1.2989078.
Pełny tekst źródłaAxelsson, Maria. "3D Tracking of Cellulose Fibres in Volume Images". W 2007 IEEE International Conference on Image Processing. IEEE, 2007. http://dx.doi.org/10.1109/icip.2007.4380016.
Pełny tekst źródłaMilestone, N. B. "Interactions of cellulose fibres in an autoclaved cement matrix". W International RILEM Symposium on Concrete Science and Engineering: A Tribute to Arnon Bentur. RILEM Publications SARL, 2004. http://dx.doi.org/10.1617/2912143586.014.
Pełny tekst źródłaWang, Z., H. Xiao i M. Sain. "Poly (butyl acrylate)-Modified Cellulose Fibres for Toughening WPC". W SAE World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2007. http://dx.doi.org/10.4271/2007-01-0574.
Pełny tekst źródłaGaiolas, Carla, Maria Emilia Amaral, Ana Paula Costa, Manuel José Santos Silva i Mohamed Naceur Belgacem. "Cold-plasma assisted grafting of cellulose fibres by acrylic monomers". W 6TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2012. http://dx.doi.org/10.1063/1.4738475.
Pełny tekst źródłaCiambella, Jacopo, i David C. Stanier. "Orientation Effects in Short Fibre-Reinforced Elastomers". W ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-40430.
Pełny tekst źródłaSaavedra Flores, Erick I., Senthil Murugan, Michael I. Friswell i Eduardo A. de Souza Neto. "Fully Coupled Three-Scale Finite Element Model for the Mechanical Response of a New Bio-Inspired Composite". W ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/smasis2011-4946.
Pełny tekst źródłaGaiolas, C., A. P. Costa, M. J. Santos Silva i M. N. Belgacem. "Cold-plasma assisted hydrophobisation of cellulose fibres with styrene and para-halogenated homologues". W 6TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2012. http://dx.doi.org/10.1063/1.4738471.
Pełny tekst źródłaRaporty organizacyjne na temat "Cellulose fibres"
Granot, David, Scott Holaday i Randy D. Allen. Enhancing Cotton Fiber Elongation and Cellulose Synthesis by Manipulating Fructokinase Activity. United States Department of Agriculture, 2008. http://dx.doi.org/10.32747/2008.7613878.bard.
Pełny tekst źródłaMorrison, Mark, i Joshuah Miron. Molecular-Based Analysis of Cellulose Binding Proteins Involved with Adherence to Cellulose by Ruminococcus albus. United States Department of Agriculture, listopad 2000. http://dx.doi.org/10.32747/2000.7695844.bard.
Pełny tekst źródłaMorrison, Mark, Joshuah Miron, Edward A. Bayer i Raphael Lamed. Molecular Analysis of Cellulosome Organization in Ruminococcus Albus and Fibrobacter Intestinalis for Optimization of Fiber Digestibility in Ruminants. United States Department of Agriculture, marzec 2004. http://dx.doi.org/10.32747/2004.7586475.bard.
Pełny tekst źródłaO'Neill, Hugh, Barbara Evans, Gary A. Baker i Roberto Benson. Directed Biosynthesis of Oriented Crystalline Cellulose for Advanced Composite Fibers. Fort Belvoir, VA: Defense Technical Information Center, maj 2012. http://dx.doi.org/10.21236/ada572961.
Pełny tekst źródłaDelmer, Deborah P., i Prem S. Chourey. The Importance of the Enzyme Sucrose Synthase for Cell Wall Synthesis in Plants. United States Department of Agriculture, październik 1994. http://dx.doi.org/10.32747/1994.7568771.bard.
Pełny tekst źródłaDelmer, Deborah P., Douglas Johnson i Alex Levine. The Role of Small Signal Transducing Gtpases in the Regulation of Cell Wall Deposition Patterns in Plants. United States Department of Agriculture, sierpień 1995. http://dx.doi.org/10.32747/1995.7570571.bard.
Pełny tekst źródłaWinterhalter, C. Experimental Battledress Uniform Fabrics Made from Amine Oxide Solvent Spun Cellulosic Fibers. Fort Belvoir, VA: Defense Technical Information Center, luty 2002. http://dx.doi.org/10.21236/ada400546.
Pełny tekst źródłaKosny, Jan, David W. Yarbrough, William A. Miller, Thomas Petrie, Phillip W. Childs i Azam M. Syed. 2006/07 Field Testing of Cellulose Fiber Insulation Enhanced with Phase Change Material. Office of Scientific and Technical Information (OSTI), grudzień 2008. http://dx.doi.org/10.2172/983811.
Pełny tekst źródłaMizell, Steve A., i Craig A. Shadel. Radiological results for samples collected on paired glass- and cellulose-fiber filters at the Sandia complex, Tonopah Test Range, Nevada. Office of Scientific and Technical Information (OSTI), marzec 2016. http://dx.doi.org/10.2172/1242391.
Pełny tekst źródłaLundy, Erika L., Daniel D. Loy i Stephanie L. Hansen. Influence of Distillers Grains from a Cellulosic Ethanol Process Utilizing Corn Kernel Fiber on Nutrient Digestibility of Lambs and Steer Feedlot Performance. Ames (Iowa): Iowa State University, styczeń 2015. http://dx.doi.org/10.31274/ans_air-180814-1273.
Pełny tekst źródła