Artykuły w czasopismach: „Cellular facility layout”

1

Kumar, Ravi, i Surya Prakash Singh. "Cellular facility layout problem: a case of tower manufacturing industry". Management of Environmental Quality: An International Journal 30, nr 6 (9.09.2019): 1345–60. http://dx.doi.org/10.1108/meq-04-2018-0076.

Pełny tekst źródła

Streszczenie:

Purpose In today’s competitive market, product demand and its mix frequently vary due to various uncertainties, which thus imparts the overall manufacturing cost. Furthermore, uncertainties also impart the layout design in manufacturing industries in the long run. Therefore, the layout design needs to capture the possibility of uncertainties, and these uncertainties must be captured while designing the layout of a facility. Hence, an efficient facility layout design minimizes the manufacturing cost and lead time. The purpose of this paper is to propose a cellular layout design for a tower manufacturing industry. Design/methodology/approach The paper develops an embedded simulated annealing-based meta-heuristic to solve proposed cellular layout under different scenarios considering single and multi-time periods for tower manufacturing industry. A comparative study is also performed to analyze comparison among static cellular layout, a dynamic cellular layout or a robust stochastic cellular layout for the tower manufacturing industry. Findings The current layout of the industry is a process layout. Here, the layout for a tower manufacturing industry is proposed under SCFLP, DCFLP and RSCFLP. The proposed models and solution methodology is tested using six scenarios with different combination of time periods. Lastly, OFV value obtained for all the scenarios is compared, and it is found that RSCFLP outruns other SCFLP and DCFLP for a tower manufacturing industry. Based on the above study, it is also concluded that RSCFLP is an efficient and effective layout in tower manufacturing industry. Originality/value The paper proposes a cellular layout design for a tower manufacturing industry. The cellular layout design is found to be preferred over the traditional layout as it reduces material handling cost, manufacturing lead time and hazards. Moreover, it enhances productivity and quality.

Style APA, Harvard, Vancouver, ISO itp.

2

Fei, Lee Li, i Shahryar Sorooshian. "Impact on Improving Facility Layout Design on Company System Performance". Journal of Management and Science 1, nr 4 (30.12.2013): 514–17. http://dx.doi.org/10.26524/jms.2013.71.

Pełny tekst źródła

Streszczenie:

Layout design is one of the significant roles on company performance and work-cells layout is one of the thriving methods. Therefore, many researchers have point out the advantages of cellular manufacturing system. However, in this study, the problems of cellular manufacturing will be point out according to company performance: work in process lead time, worker performance and company productivity.

Style APA, Harvard, Vancouver, ISO itp.

3

Bai, Xiao Gang, i Xin Zhang. "A Study on the Flexibility of Apparel Manufacturing System". Advanced Materials Research 175-176 (styczeń 2011): 1011–15. http://dx.doi.org/10.4028/www.scientific.net/amr.175-176.1011.

Pełny tekst źródła

Streszczenie:

In the current and future apparel market, customer demands various products. The apparel plants have to face the ever-changing demands from product mixture and volume. Satisfying customer demands is an important strategic requirement. Failing to do so can result not only in lost profits caused by reduced sales, but also placing the manufacturers in danger of losing future market. So the plant must manufacture correctly and send the products to clients timely. Therefore, the time taken to manufacture high quality products is very important. Layout design is the method utilized on assigning the machine to a certain space. Facility layout includes product layout, process layout and cellular layout etc. The right facility layout can provide manufacturing flexibility and reduce manufacturing cost. In the general facility layout problem, the material flow and department relationship is a major optimization goal. This paper will discuss the manufacturing flexibility from facility layout and propose time as an additional requirement to the material flow and department relationship. This paper will also provide a layout model for flexible manufacturing in view of apparel manufacturing characteristics.

Style APA, Harvard, Vancouver, ISO itp.

4

Van Thanh, Nguyen, Nguyen Thai Nguyet Thanh i Nguyen Viet Tinh. "Group Technology for Optimizing Manufacturing Facility Layout". ARRUS Journal of Engineering and Technology 1, nr 1 (19.08.2021): 9–17. http://dx.doi.org/10.35877/jetech512.

Pełny tekst źródła

Streszczenie:

In recent years, the process of cellular manufacturing and group technology have received a lot of attention and popularity in many developed countries. By applying Group Technology (GT), many benefits of flow-line production can be attained in a batch production system. GT improves material handling significantly by reducing material flow time, distance, and setup times. In this paper, an earnest investigative attempt was made to provide valuable information regarding the use of Group Technology by applying to a real world jobshop system. The proposed GT model has the flexibility of choosing the number of cells required, which is very useful in examining different manufacturing cell configurations; or in case the workshop or factory prefers a certain number of work cells. The GT model results were found satisfactory and superior to other techniques in some cases.

Style APA, Harvard, Vancouver, ISO itp.

5

Lu, Tong Tong, Zheng Liu, Yi Zhang i Teng Zhan. "Workshop Facility Layout Optimization Based on the Crowding Niche Cellular Genetic Algorithm". Applied Mechanics and Materials 278-280 (styczeń 2013): 2172–76. http://dx.doi.org/10.4028/www.scientific.net/amm.278-280.2172.

Pełny tekst źródła

Streszczenie:

Workshop facility layout belongs to a kind of combinational optimization problem, which has the characteristics of nonlinearity and not being easily solved with conventional methods, therefore it is regarded as a typical NP hard problem. This paper proposed a crowding niche cellular genetic algorithm. By introducing niche crowding technology to select the best individuals, the population diversity was well maintained. On the other hand, neighbors in cellular automata were adopted to study more on the cellular topological optimization structure, which enhanced the global searching ability of the algorithm. In addition, multi-line workshop facility layout problem has been optimized in the paper, which verified that the crowding niche cellular genetic algorithm was effective and applicable.

Style APA, Harvard, Vancouver, ISO itp.

6

Davies, Alan, Elwyn John i Andrew Thomas. "A flow direction weighting scheme for facility layout in cellular manufacturing". International Journal of Productivity and Performance Management 62, nr 2 (11.01.2013): 185–203. http://dx.doi.org/10.1108/17410401311295731.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Golmohammadi, Amir-Mohammad, Hasan Rasay, Zaynab Akhoundpour Amiri, Maryam Solgi i Negar Balajeh. "Soft Computing Methodology to Optimize the Integrated Dynamic Models of Cellular Manufacturing Systems in a Robust Environment". Mathematical Problems in Engineering 2021 (11.11.2021): 1–13. http://dx.doi.org/10.1155/2021/3040391.

Pełny tekst źródła

Streszczenie:

Machine learning, neural networks, and metaheuristic algorithms are relatively new subjects, closely related to each other: learning is somehow an intrinsic part of all of them. On the other hand, cell formation (CF) and facility layout design are the two fundamental steps in the CMS implementation. To get a successful CMS design, addressing the interrelated decisions simultaneously is important. In this article, a new nonlinear mixed-integer programming model is presented which comprehensively considers solving the integrated dynamic cell formation and inter/intracell layouts in continuous space. In the proposed model, cells are configured in flexible shapes during the planning horizon considering cell capacity in each period. This study considers the exact information about facility layout design and material handling cost. The proposed model is an NP-hard mixed-integer nonlinear programming model. To optimize the proposed problem, first, three metaheuristic algorithms, that is, Genetic Algorithm (GA), Keshtel Algorithm (KA), and Red Deer Algorithm (RDA), are employed. Then, to further improve the quality of the solutions, using machine learning approaches and combining the results of the aforementioned algorithms, a new metaheuristic algorithm is proposed. Numerical examples, sensitivity analyses, and comparisons of the performances of the algorithms are conducted.

Style APA, Harvard, Vancouver, ISO itp.

8

Wang, Tai-Yue, Her-Chang Lin i Kuei-Bin Wu. "An improved simulated annealing for facility layout problems in cellular manufacturing systems". Computers & Industrial Engineering 34, nr 2 (kwiecień 1998): 309–19. http://dx.doi.org/10.1016/s0360-8352(97)00318-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Ariafar, Shahram, Napsiah Ismail, Sai Hong Tang, Mohd Khairol Anuar Mohd Ariffin i Zahra Firoozi. "The reconfiguration issue of stochastic facility layout design in cellular manufacturing systems". International Journal of Services and Operations Management 11, nr 3 (2012): 255. http://dx.doi.org/10.1504/ijsom.2012.045658.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Ariafar, Shahram, Napsiah Binti Ismail, Mohd Khairol Anuar Mohd Ariffin, Say Hong Tang i Zahra Firoozi. "Illustration and Model Verification for an Inter-Cell and Intra-Cell Facility Layout Problem in a Cellular Manufacturing System". Applied Mechanics and Materials 263-266 (grudzień 2012): 1310–14. http://dx.doi.org/10.4028/www.scientific.net/amm.263-266.1310.

Pełny tekst źródła

Streszczenie:

In a Cellular Manufacturing System (CMS), parts based on their similarities are grouped into part families, and are assigned to one or more machine cells to be manufactured. In the design of a CMS, facility layout problem aims to arrange machine cells in the shop floor and facilities in the machine cells in order to have an efficient layout. In this study, a previously developed cellular layout model will be illustrated and validated for a well-known case from the literature. Lingo optimization software version 12.0 and an enumeration method will be used to solve, and validate the model. The results of this study show the validity of the proposed model.

Style APA, Harvard, Vancouver, ISO itp.

11

Tavakkoli-Moghaddam, R., N. Javadian, B. Javadi i N. Safaei. "Design of a facility layout problem in cellular manufacturing systems with stochastic demands". Applied Mathematics and Computation 184, nr 2 (styczeń 2007): 721–28. http://dx.doi.org/10.1016/j.amc.2006.05.172.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Ghassemi Tari, Farhad, i Khatereh Ahadi. "Cellular layout design using Tabu search, a case study". RAIRO - Operations Research 53, nr 5 (8.10.2019): 1475–88. http://dx.doi.org/10.1051/ro/2018077.

Pełny tekst źródła

Streszczenie:

This paper presents a facility layout design for a cellular manufacturing system (CMS), with the automated guided vehicles (AGVs) as the transportation device, to minimize the total material handling costs. A new concept of assigning the workstations to the non-overlapping closed zones, by which independent AGVs are allocated for internal transfer of materials/parts in each zone, is proposed. To handle this problem, a mathematical programming model is developed. The problem has been shown to be NP-hard. This computational difficulty has led us to consider suboptimal solutions generated by a Tabu search with three algorithmic variants. To evaluate the efficiencies of these algorithms, an ANOVA statistical test is performed and the best algorithm is designated. The solution of the new algorithms is then compared with the solution obtained by the CPLEX software. The result indicates that the designated algorithm can provide an average solution with a small deviation of only 0.01% from the optimal solution. This algorithm is also applied to a real-world case problem. The use of this algorithm for re-designing of the layout for the real-world case problem shows considerable cost saving comparing to its existing layout design.

Style APA, Harvard, Vancouver, ISO itp.

13

Yang, Jing, Feng Shi, Yizhong Sun i Jie Zhu. "A Cellular Automata Model Constrained by Spatiotemporal Heterogeneity of the Urban Development Strategy for Simulating Land-use Change: A Case Study in Nanjing City, China". Sustainability 11, nr 15 (24.07.2019): 4012. http://dx.doi.org/10.3390/su11154012.

Pełny tekst źródła

Streszczenie:

While cellular automata (CA) has become increasingly popular in land-use and land-cover change (LUCC) simulations, insufficient research has considered the spatiotemporal heterogeneity of urban development strategies and applied it to constrain CA models. Consequently, we proposed to add a zoning transition rule and planning influence that consists of a development grade coefficient and traffic facility coefficient in the CA model to reflect the top-down and heterogeneous characteristics of spatial layout and the dynamic and heterogeneous external interference of traffic facilities on land-use development. Testing the method using Nanjing city as a case study, we show that the optimal combinations of development grade coefficients are different in different districts, and the simulation accuracies are improved by adding the grade coefficients into the model. Moreover, the integration of the traffic facility coefficient does not improve the model accuracy as expected because the deployment of the optimal spatial layout has considered the effect of the subway on land use. Therefore, spatial layout planning is important for urban green, humanistic and sustainable development.

Style APA, Harvard, Vancouver, ISO itp.

14

Allahyari, Maral Zafar, i Ahmed Azab. "A Novel Bi-level Continuous Formulation for the Cellular Manufacturing System Facility Layout Problem". Procedia CIRP 33 (2015): 87–92. http://dx.doi.org/10.1016/j.procir.2015.06.017.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Ariafar, Shahram, Napsiah Ismail, Sai Hong Tang, Mohd Khairol Anuar Mohd Ariffin i Zahra Firoozi. "Design of a facility layout model in hybrid cellular manufacturing systems under variable demand". International Journal of Industrial and Systems Engineering 9, nr 4 (2011): 373. http://dx.doi.org/10.1504/ijise.2011.043482.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Lamba, Kuldeep, Ravi Kumar, Shraddha Mishra i Shubhangini Rajput. "Sustainable dynamic cellular facility layout: a solution approach using simulated annealing-based meta-heuristic". Annals of Operations Research 290, nr 1-2 (27.07.2019): 5–26. http://dx.doi.org/10.1007/s10479-019-03340-w.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Wang, T. Y., K. B. Wu i Y. W. Liu. "A simulated annealing algorithm for facility layout problems under variable demand in Cellular Manufacturing Systems". Computers in Industry 46, nr 2 (wrzesień 2001): 181–88. http://dx.doi.org/10.1016/s0166-3615(01)00107-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Altuntas, S., T. Dereli i H. Selim. "Fuzzy weighted association rule based solution approaches to facility layout problem in cellular manufacturing system". International Journal of Industrial and Systems Engineering 15, nr 3 (2013): 253. http://dx.doi.org/10.1504/ijise.2013.056676.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Yohanes Anton Nugroho. "Re-Layout Tata Letak Bagian Percetakan Menggunakan Calullar Manufacturing System". Jurnal Penelitian Rumpun Ilmu Teknik 1, nr 4 (5.11.2022): 28–37. http://dx.doi.org/10.55606/juprit.v1i4.613.

Pełny tekst źródła

Streszczenie:

Material handling in the production division of publisher X encountered several obstacles, including the transfer of material between production processes having cross-movement flows. This condition occurs as a result of an irregular engine layout. The impact of the conditions in the transfer of material in the production process is the distance of the transfer to be 968.6 m/day. This condition causes some machines to be repositioned, so that material transfer can run faster and more efficiently. One of the efforts to reduce material transfer is to re-plan the placement of production facilities by adopting the concept of a cellular manufacturing system or cellular manufacturing system that is feasible to be applied to the production process of publisher X. The cellular manufacturing system was chosen because it is in accordance with the number of characteristics of the publishing industry that requires the ability to anticipate changes. This rapid demand suits a particular market. This article describes how the results of rearranging and minimizing the distance of moving raw materials in the production section of publisher X by adopting the concept of a cellular manufacturing system and rearranging the layout of production facilities by using sorting using Sorting Algorithms. The selection of the Sorting Algorithms is based on consideration of the order of the output which is not coherent, so it needs to be sorted. Efficient sorting is needed to determine the part-machine incidence matrix which is then used in the development of cellular manufacturing systems. Program development on Visual Studio 2012 software shows the results of facility layout planning by grouping 20 machines and 11 products with this layout change, the total material handling distance is reduced by 371.8 m or by 61.61%

Style APA, Harvard, Vancouver, ISO itp.

20

Zhang, Jing. "Intelligent Layout of Music and Cultural Facilities Based on Heterogeneous Cellular Network". Mobile Information Systems 2022 (19.07.2022): 1–8. http://dx.doi.org/10.1155/2022/2049905.

Pełny tekst źródła

Streszczenie:

With the emergence and development of computer technology, the computing power of computer is also constantly improving and has driven the development of other fields. As an important way to improve the computing power, availability, and reliability of computer system, parallel computing is the hot spot and trend of the development of computer technology. This paper introduces the technical background and basic knowledge of parallel computing. Aiming at the problem of scheduling independent tasks and scheduling related tasks, this paper proposes a method of transforming independent tasks into related tasks and unifies the model. With the progress of mobile Internet technology, the rapid growth of mobile terminals and data traffic has spawned a large number of computing intensive and delay sensitive applications. In 5G heterogeneous cellular networks, users may become computationally demanding and delay sensitive. MEC server can solve the problem of its own computing power and battery capacity limitation. Music and cultural institutions provide City Music and cultural products. With the rapid development of modern cities, unbalanced, disordered, and large-scale music and cultural institutions cannot meet the needs of urban residents for music and culture in essence. From the perspective of urban music and cultural institutions, combined with the characteristics of music and cultural intelligence, this paper analyzes the fairness, accessibility, and attraction of the institutions through field research and GIS technology and analyzes the music. From the perspective of facility layout, it analyzes the problems and pain points of music and cultural intelligence layout, such as disorder, imbalance, and failure. In this paper, we use parallel computing technology to optimize intelligent placement of music and cultural facilities, to provide technical basis for related research.

Style APA, Harvard, Vancouver, ISO itp.

21

Kumar, Ravi, i Surya Prakash Singh. "A similarity score-based two-phase heuristic approach to solve the dynamic cellular facility layout for manufacturing systems". Engineering Optimization 49, nr 11 (26.01.2017): 1848–67. http://dx.doi.org/10.1080/0305215x.2016.1274205.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Houshyar, Afsaneh Nouri, Zulkiflle Bin Leman, Moh Khairol Anuar Mohd Ariffin, Napsiah Ismail, Hojat Pakzad Moghadam i Hossein Iranmanesh. "Proposed linear-mathematical model for configuring cell and designing unequal-area facility layout in dynamic cellular manufacturing system". International Journal of Industrial and Systems Engineering 22, nr 3 (2016): 332. http://dx.doi.org/10.1504/ijise.2016.074710.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Li, Ming Hua, Zhen Zhou Yuan i Yan Xu. "Applied Technology in a Developed Simulation Model of Pedestrian Crowd Dynamics during Emergency Evacuation". Advanced Materials Research 1022 (sierpień 2014): 223–28. http://dx.doi.org/10.4028/www.scientific.net/amr.1022.223.

Pełny tekst źródła

Streszczenie:

In this paper, we present a developed cellular automata model to simulate the pedestrians’ crowd behaviors in congested public facility during emergency evacuation. Pedestrian perception and choice behavior considering the queue time of door changing were investigated in pedestrian decision and evacuation time. The model was used to mimic the emergency evacuation with a range of densities for the study of relationship between individual behavior and evacuation time. The results indicate that pedestrian is sensitively for the queue time and prefer to change the exit if the evacuation time perceived by the pedestrian is large then other exit during the escape process. The model is useful to study the pedestrian’s behavior during the emergency evacuation, and helpful for safe layout of the public facilities.

Style APA, Harvard, Vancouver, ISO itp.

24

Raminfar, Reza, Norzima Zulkifli, Mohammadreza Vasili i Tang Sai Hong. "An Integrated Model for Production Planning and Cell Formation in Cellular Manufacturing Systems". Journal of Applied Mathematics 2013 (2013): 1–10. http://dx.doi.org/10.1155/2013/487694.

Pełny tekst źródła

Streszczenie:

Cellular manufacturing (CM) is a production approach directed towards reducing costs, as well as increasing system's flexibility in today's small-to-medium lot production environment. Many structural and operational issues should be considered for a successful CM design and implementation such as cell formation (CF), production planning, and facility layout. Most researchers have addressed these issues sequentially or independently, instead of jointly optimizing a combination of these issues. In order to attain better results to ensure that the system will be capable of remaining efficient in unknown future situations, these issues should be addressed simultaneously. In this paper, a mathematical model is developed using an integrated approach for production planning and cell formation problems in a CM. A set of numerical examples are provided from existing the literature in order to test and illustrate the proposed model. In order to evaluate and verify the performance of the proposed model, it is compared with a well-known cell formation methods (rank order clustering and direct clustering analysis), using group capability index (GCI) measure. The results and comparisons indicate that the proposed model has a significantly higher and satisfactory performance and it is reliable for the design and the analysis of CM systems.

Style APA, Harvard, Vancouver, ISO itp.

25

Kwon, Minyoung, i Hilde Remøy. "Office employee satisfaction: the influence of design factors on psychological user satisfaction". Facilities 38, nr 1/2 (30.08.2019): 1–19. http://dx.doi.org/10.1108/f-03-2019-0041.

Pełny tekst źródła

Streszczenie:

Purpose Employees’ satisfaction and productivity is one of the main interests of employers. Psychological comfort can cause dissatisfaction with their work. Thus, it is important to understand what factors contribute to employees’ satisfaction in workplaces. The purpose of this paper is to identify the weight of contribution of each design parameter on increasing psychological satisfaction. Design/methodology/approach The study included 579 employees in five offices in The Netherlands through an online survey. The typologies of offices vary in terms of office layouts, orientations and façade. Additionally, a parameter of desk location was included as this factor may be associated with user satisfaction. Kruskal–Wallis H test, categorical regression, and logistic regression analyses were performed to examine the impact of these design parameters on psychological user satisfaction. Findings The results revealed the impact of design parameters on the psychological satisfaction. The parameters of office layouts and desk locations were the significant predictor factors for the probability of satisfaction variables (e.g. privacy, concentration, communication, social contact and territoriality). The parameters for optimal satisfaction were found in cellular office, north-west oriented workstation and 4 m away from a window. Originality/value Psychological comfort is an inevitable aspect in user satisfaction studies. This paper, therefore, measures and predicts the relationship between design factors and employees’ satisfaction through case studies in The Netherlands. The findings help designers, architects, planners and facility managers to develop user-focussed office design principles supporting employees’ work performance.

Style APA, Harvard, Vancouver, ISO itp.

26

Golmohammadi, Amir-Mohammad, Hamid Bani-Asadi, Hamid Esmaeeli, Hengameh Hadian i Farzaneh Bagheri. "Facility layout for cellular manufacturing system under dynamic conditions". Decision Science Letters, 2016, 407–16. http://dx.doi.org/10.5267/j.dsl.2016.2.001.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Hunagund, Irappa Basappa, V. Madhusudanan Pillai i Kempaiah U.N. "A survey on discrete space and continuous space facility layout problems". Journal of Facilities Management ahead-of-print, ahead-of-print (11.08.2021). http://dx.doi.org/10.1108/jfm-02-2021-0019.

Pełny tekst źródła

Streszczenie:

Purpose The purpose of this paper is to review, evaluate and classify the academic research that has been published in facility layout problems (FLPs) and to analyse how researches and practices on FLPs are. Design/methodology/approach The review is based on 166 papers published from 1953 to 2021 in international peer-reviewed journals. The literature review on FLPs is presented under broader headings of discrete space and continuous space FLPs. The important formulations of FLPs under static and dynamic environments represented in the discrete and continuous space are presented. The articles reported in the literature on various representations of facilities for the continuous space Unequal Area Facility Layout Problems (UA-FLPs) are summarized. Discussed and commented on adaptive and robust approaches for dynamic environment FLPs. Highlighted the application of meta-heuristic solution methods for FLPs of a larger size. Findings It is found that most of the earlier research adopted the discrete space for the formulation of FLPs. This type of space representation for FLPs mostly assumes an equal area for all facilities. UA-FLPs represented in discrete space yield irregular shape facilities. It is also observed that the recent works consider the UA-FLPs in continuous space. The solution of continuous space UA-FLPs is more accurate and realistic. Some of the recent works on UA-FLPs consider the flexible bay structure (FBS) due to its advantages over the other representations. FBS helps the proper design of aisle structure in the detailed layout plan. Further, the recent articles reported in the literature consider the dynamic environment for both equal and unequal area FLPs to cope with the changing market environment. It is also found that FLPs are Non-deterministic Polynomial-complete problems, and hence, they set the challenges to researchers to develop efficient meta-heuristic methods to solve the bigger size FLPs in a reasonable time. Research limitations/implications Due to the extremely large number of papers on FLPs, a few papers may have inadvertently been missed. The facility layout design research domain is extremely vast which covers other areas such as cellular layouts, pick and drop points and aisle structure design. This research review on FLPs did not consider the papers published on cellular layouts, pick and drop points and aisle structure design. Despite the possibility of not being all-inclusive, the authors firmly believe that most of the papers published on FLPs are covered and the general picture presented on various approaches and parameters of FLPs in this paper are precise and trustworthy. Originality/value To the best of the authors’ knowledge, this paper reviews and classifies the literature on FLPs for the first time under the broader headings of discrete space and continuous space representations. Many important formulations of FLPs under static and dynamic environments represented in the discrete and continuous space are presented. This paper also provides the observations from the literature review and identifies the prospective future directions.

Style APA, Harvard, Vancouver, ISO itp.

28

Golmohammadi, Amir-Mohammad, Arezoo Asadi, Zaynab Akhoundpour Amiri i Matineh Behzad. "Design of a facility layout problem in cellular manufacturing systems with stochastic demands". Management Science Letters, 2018, 1133–48. http://dx.doi.org/10.5267/j.msl.2018.8.010.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

"Optimizing Cellular Manufacturing Facility Layout Design through Digital Twin Simulation: A Case Study". Industrial Engineering and Innovation Management 6, nr 6 (2023). http://dx.doi.org/10.23977/ieim.2023.060601.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Ramesh, S., N. Arunkumar i R. Vijayaraj. "CELLULAR MANUFACTURING LAYOUT DESIGN USING HEURISTIC CLUSTERING ALGORITHM AND LPP MODEL". South African Journal of Industrial Engineering 32, nr 2 (2021). http://dx.doi.org/10.7166/32-2-2340.

Pełny tekst źródła

Streszczenie:

This mathematical model forms machine cells, optimises the costs of unassigned machines and components, and designs the shop floor cell layout to have minimal movement of materials. The complete similarity measure algorithm forms machine cells and part families in a refined form. Later, exceptional elements are eliminated in the optimisation model by using machine duplication and sub-contracting of parts. Then the shop floor layout is designed to have optimised material movements between and within cells. An evaluation of the cell formation algorithm’ performance is done on the benchmark problems of various batch sizes to reveal the process’s capability compared with other similar methods. The data of machining times are acquired and tabulated in a part incidence matrix, which is used as input for the algorithm. The results from the linear programming optimisation model are that costs are saved, machines are duplicated, parts are sub-contracted, and there are inter- and intra- cellular movements. Finally, the output of the inbound facility design is the floor layout, which has machine cell clusters within the optimised floor area.

Style APA, Harvard, Vancouver, ISO itp.

31

Zhang, Rui, Xiaoxia Yang, Meiqi Zhou, Yongxing Li i Xiaoli Yang. "Stair/escalator/elevator selection behavior of passengers in subway stations based on the fuzzy logic theory". SIMULATION, 12.01.2023, 003754972211456. http://dx.doi.org/10.1177/00375497221145645.

Pełny tekst źródła

Streszczenie:

The behavior of stair/escalator/elevator selection of passengers at the subway platform could directly affect the travel efficiency and even the service level of the station. This paper proposes a stair/escalator/elevator selection model of passengers at the subway platform, where the cellular automata model is used to simulate passenger movement, and the fuzzy logic theory is used to describe selection behavior. The distance to the stair/escalator/elevator and the density of passengers in front of the facility are selected as the main influence factors. The rationality and effectiveness of the selection model are verified by comparing the field data with simulation results of passengers choosing different stairs/escalators/elevators. The relationship between passenger quantity, passenger speed, escalator quantity, escalator location, and the traffic rate is analyzed based on simulation results, which can provide a theoretical reference for the facility layout optimization at the platform floor of the subway station.

Style APA, Harvard, Vancouver, ISO itp.

Artykuły w czasopismach na temat „Cellular facility layout”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych