Gotowa bibliografia na temat „Carbon”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Carbon”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Carbon"
Zolotareva, O. K. "BIOCATALYTIC CARBON DIOXIDE CAPTURE PROMOTED BY CARBONIC ANHYDRASE". Biotechnologia Acta 16, nr 5 (31.10.2023): 5–21. http://dx.doi.org/10.15407/biotech16.05.005.
Pełny tekst źródłaAndreas, Roy, Uyi Sulaeman i Tien Setyaningtyas. "PEMANFAATAN KARBON SABUT KELAPA TERIMPREGNASI UNTUK MENGURANGI TEMBAGA(II) DALAM MEDIUM AIR". Molekul 3, nr 2 (1.11.2008): 91. http://dx.doi.org/10.20884/1.jm.2008.3.2.53.
Pełny tekst źródłaKessler, H., W. Bermel i C. Griesinger. "Determination of carbon-carbon connectivities, assignment of quaternary carbons, and extraction of carbon-carbon coupling constants by carbon-relayed hydrogen-carbon spectroscopy". Journal of Magnetic Resonance (1969) 62, nr 3 (maj 1985): 573–79. http://dx.doi.org/10.1016/0022-2364(85)90231-8.
Pełny tekst źródłaXu, Xian Feng, Ling Zhi Chai, Hui Li i Ling Sheng Zeng. "Study on the Electric Properties of Carbon Fibers and its Application for the Preparation of Carbon/Carbon Composites". Materials Science Forum 809-810 (grudzień 2014): 707–10. http://dx.doi.org/10.4028/www.scientific.net/msf.809-810.707.
Pełny tekst źródłaRahmawati, Fitria, Viona Natalia, Agung T. Wijayanta, Siti Rondiyah, Koji Nakabayashi i Jin Miyawaki. "Carbon Waste Powder Prepared from Carbon Rod Waste of Zinc-Carbon Batteries for Methyl Orange Adsorption". Bulletin of Chemical Reaction Engineering & Catalysis 15, nr 1 (3.09.2019): 66–73. http://dx.doi.org/10.9767/bcrec.15.1.5148.66-73.
Pełny tekst źródłaRamírez-Palma, Richard Iván, Alejandro Crisóstomo Véliz-Aguayo, Juan Francisco Garcés-Vargas, Lucrecia Cristina Moreno-Alcívar, Gerardo Antonio Herrera-Brunett i Miguel Antonio Salvatierra-Barzola. "Reducción de trazas de materia orgánica en agua potable mediante la adsorción con Zeolita.//Reduction of organic matter traces in drinking water through adsorption with zeolite". CIENCIA UNEMI 12, nr 29 (31.01.2019): 51–62. http://dx.doi.org/10.29076/issn.2528-7737vol12iss29.2019pp51-62p.
Pełny tekst źródłaZhang, Xiuwei, i Feihai Yu. "Physical disturbance accelerates carbon loss through increasing labile carbon release". Plant, Soil and Environment 66, No. 11 (2.11.2020): 584–89. http://dx.doi.org/10.17221/257/2020-pse.
Pełny tekst źródłaRivera–Utrilla, J., i M. A. Ferro–García. "Effect of Carbon–Oxygen and Carbon–Nitrogen Surface Complexes on the Adsorption of Cations by Activated Carbons". Adsorption Science & Technology 3, nr 4 (grudzień 1986): 293–302. http://dx.doi.org/10.1177/026361748600300409.
Pełny tekst źródłaLi, Zhong, Hongjuan Wang, Hongxia Xi, Qibin Xia, Jinglei Han i Lingai Luo. "Estimation of Activation Energy of Desorption of n-Hexanol from Activated Carbons by the TPD Technique". Adsorption Science & Technology 21, nr 2 (marzec 2003): 125–33. http://dx.doi.org/10.1260/026361703769013862.
Pełny tekst źródłaOHMAE, Nobuo. "PL01 RECENT EXPERIMENTAL WORK ON TRIBOLOGY OF CARBON ONIONS AND SOME TOPICS RELATED TO NANO-CARBONS". Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2011.10 (2011): _PL01–1_. http://dx.doi.org/10.1299/jsmeatem.2011.10._pl01-1_.
Pełny tekst źródłaRozprawy doktorskie na temat "Carbon"
Maluenda, Borderas Irene. "(N-heterocyclic carbene) : metal catalysed carbon-carbon and carbon-heteroatom bond-forming reactions". Thesis, University of Sussex, 2018. http://sro.sussex.ac.uk/id/eprint/76274/.
Pełny tekst źródłaSirokman, Gergely. "(N-heterocyclic-carbene)Copper(I)-catalyzed carbon-carbon bond formation using carbon dioxide". Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/39584.
Pełny tekst źródłaVita.
Includes bibliographical references.
This thesis presents work towards the development of a new catalytic C-C bond forming reaction. Alkynes and olefins insert into [(IPr)CuH]2 (IPr = N,N-bis-(2,6-diisopropylphenyl)-1,3-imidazol-2-ylidene) to give copper vinyl and copper alkyl complexes. These copper complexes insert CO2 into the Cu-C bond to form copper acrylate and copper carboxylate complexes. Acrylic and carboxylic acids can be isolated by hydrolysis. A catalytic cycle based on (IPr)copper(I) was developed. Alkynes undergo reductive carboxylation to give acrylic acids in moderate yields. Unexpected interactions between several components of the catalytic system led to a number of side reaction, most importantly between [(IPr)CuH]2 and the product silyl acrylate. The use of silylcarbonate salts to desylilate the product enhanced yield. In addition, silylcarbonates can also serve as a source of CO2.
by Gergely Sirokman.
Ph.D.
Morell, Soler Francisco Joaquín. "Soil organic carbon dynamics and carbon sequestration in a semiarid Mediterranean agroecosystem: effects of conservation tillage and nitrogen fertilization". Doctoral thesis, Universitat de Lleida, 2012. http://hdl.handle.net/10803/101151.
Pełny tekst źródłaEl balance entre la entrada de C (de los residuos vegetales) y salidas de C (principalmente como CO2 de la descomposición del carbono orgánico del suelo -SOC-), determina el contenido de SOC, que es el mayor depósito terrestre de C. En agroecosistemas semiáridos Mediterráneos, el agua es el principal factor limitante del crecimiento del cultivo y de la entrada de residuos en el suelo. Las prácticas agronómicas alternativas pueden mejorar el crecimiento vegetal y aumentar la cantidad de residuos (entrada de C) en estos sistemas. Este trabajo estudió los efectos de la adopción a largo plazo de sistemas de laboreo (NT, no-laboreo; MT, laboreo minimo; CT, laboreo convencional) y del nivel de fertilización nitrogenada (cero; medio, 60 kg N ha-1; alto, 120 kg N ha-1) en el balance de C del suelo y el contenido de SOC. El contenido de SOC aumentó en 4.3 y 3.9 Mg C ha-1 bajo NT con respecto a MT y CT. Niveles medios y altos de fertilización nitrogenada aumentaron el contenido de SOC en 3.4 y 4.5 Mg C ha-1 con respecto al contenido en las parcelas no fertilizadas. La adopción a largo plazo de prácticas de laboreo de conservación (no-laboreo o siembra directa), junto con el uso adecuado de la fertilitzación nitrogenada demostraron ser herramientas para mejorar la sostenibilidad de los secanos semiáridos Mediterráneos y almacenar C en el suelo.
The balance between C inputs (from plant residues) and C outputs (mainly as CO2 from soil organic carbon -SOC- decomposition) determines the content of SOC which is is the largest terrestrial reservoir of carbon. Under semiarid Mediterranean agroecosystems, water limitation restrains plant growth and the return of crop residues to the soil. Alternative agronomical practices may improve crop growth and increase return of crop residue (C inputs) under these systems. This work studied the effects of long term adoption of tillage practices (NT, no-tillage; MT, minimum tillage; CT, conventional tillage) and nitrogen (N) fertilization level (zero; medium, 60 kg N ha-1; high, 120 kg N ha-1) on the SOC balance and the content of SOC. The stock of SOC was increased by 4.3 and 3.9 Mg C ha-1 under NT in comparison to MT and CT respectively. Long-term medium and high N fertilization increased the stock of SOC by 3.4 and 4.5 Mg C ha-1 in contrast to unfertilized plots. Long-term adoption of conservation tillage practices (no-tillage) together with adequate N fertilizer use, proved to be effective tools to improve sustainability of semiarid Mediterranean drylands and to store C in the soil.
Bhunia, A. "Transition-metal-free carbon-carbon and carbon-heteroatom bond - forming reactions using N -heterocyclic carbene organocatalysis and aryne chemistry". Thesis(Ph.D.), CSIR-National Chemical Laboratory, Pune, 2016. http://dspace.ncl.res.in:8080/xmlui/handle/20.500.12252/2074.
Pełny tekst źródłaAmanatidis, Ilias. "Carbon Nanotubes and Carbon Nanomotors". Thesis, Lancaster University, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.524723.
Pełny tekst źródłaHoskins, Travis Justin Christopher. "Carbon-carbon bond forming reactions". Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/29769.
Pełny tekst źródłaCommittee Chair: Dr. Christopher Jones; Committee Co-Chair: Dr. Pradeep Agrawal; Committee Member: Dr. Sujit Banerjee; Committee Member: Dr. Tom Fuller. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Montalti, Massimo. "Spectroscopical investigation of carbon nanostructures : carbon nanotubes and carbon onions". Thesis, University of Newcastle Upon Tyne, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.413968.
Pełny tekst źródłaZhang, Min. "Study on selective carbon-carbon, carbon-nitrogen, and carbon-oxygen bonds formation starting from alkynes". Rennes 1, 2009. http://www.theses.fr/2009REN1S036.
Pełny tekst źródłaLa thèse est composée de deux parties. La partie I présente la formation catalytique de liaisons C-C, C-N et C-O : une série d’ethers, de diényle, furanes 2,5-disubstitués, cétones allyliques et γ-fonctionalisées et quinolines polysubstituées ont été préparées à partir d’alcynes avec l’aide initiale d’un catalyseur de ruthenium. La partie II présente la formation de liaisons C-C, C-N, C-O: une variété de tetrahydropyridines, et de 1,3-oxazines ont été synthétisées à partir d’alcynes electrophiles via des réactions à composants multiples
Cai, Yingxiao. "Cobalt-catalyzed carbon-carbon bond formation by activation of carbon-halogen or carbon-hydrogen bonds". Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLX039/document.
Pełny tekst źródłaThis thesis presents the development of cobalt-catalyzed carbon-carbon bonds formation. The first chapter describes a novel cobalt-catalyzed electrophilic cyanation of arylzinc species, employing benign and non-toxic N-cyano-N-phenyl-p-methylbenzenesulfonamide (NCTS) as the cyano source. In this reaction, cobalt catalyzes both the formation of arylzinc species and the cyanation reaction. Various benzonitriles are synthesized affording good to excellent yields. Using cobalt-bipyridine complexes instead of CoBr2, ketone and nitrile groups can be tolerated. The second chapter reports cobalt-catalyzed Csp3-Csp3 homocoupling reaction. A simple catalytic system could deliver dimers of a number of alkyl halides/pseudohalides and allylic acetates. Sodium iodide is crucial for the homocoupling of unactivated alkyl chlorides and tosylates. This method is extended to alkyl-alkyl cross-coupling; however, the conditions still need to be optimized. The third chapter describes a cobalt-catalyzed vinyl-benzyl cross-coupling. A variety of functionalized vinyl bromides and benzyl chlorides are efficiently coupled under mild conditions in good to excellent yields, with retention of Z/E configuration. A few mechanistic experiments indicate a single electron transfer involved. The last chapter discusses the progress on the cobalt-catalyzed arylation of 2-phenylpyridine with an arylzinc species by C-H activation and promising results are obtained
Lucío, Benito Maria Isabel. "Design of multifunctional systems based on carbon nanomaterials". Doctoral thesis, Università degli studi di Trieste, 2015. http://hdl.handle.net/10077/11130.
Pełny tekst źródłaLa nanotecnologia è chiamata a rivoluzionare molti settori della nostra vita. Tra tutti i campi in cui è convolta, la ricerca delle energie rinnovabili, la possibilità di ottenere acqua pulita in tutte le parti del mondo, il miglioramento della salute e l’aumento dell’aspettativa di vita e lo sviluppo di sistemi informatici, sono gli obiettivi che si distinguono. Le nanostrutture di carbonio sono materiali promettenti che possono aiutare a raggiungere questi obiettivi: includono fullereni, grafene, nanotubi e nanohorns di carbonio. Tutti hanno proprietà interessanti e offrono nuovi vantaggi per le applicazioni in chimica dei materiali e nella medicina. Il nostro gruppo di ricerca ha sviluppato interessanti metodi per modificare queste nanostrutture per poterli applicare nei campi sopra menzionate. In questo contesto, lo scopo generale di questa tesi è il disegno di sistemi multifunzionali basati su nanostrutture di carbonio destinati ai sensori e alle applicazioni biologiche. Nel capitolo 1, viene fatta una breve panoramica dei nanotubi e i nanohorns di carbonio, spiegando la loro struttura, le loro proprietà e le loro applicazioni. Inoltre, vengono descritte le diverse strategie per la loro funzionalizzazione. Il riconoscimento molecolare gioca un ruolo importante in molti sistemi biologici. In flavoproteine, l'interazione specifica tra il cofattore flavina e l’apoenzima determina la reattività della proteina. Di conseguenza, la modulazione dell'ambiente delle flavine può essere utilizzata come strumento per determinare il loro comportamento e anche per comprendere i processi molecolari negli enzimi. Con questi obiettivi in mente, nel capitolo 2 è descritta la sintesi di differenti derivati basati sul sistema nanotubi di carbonio-triazina per l’uso come ricevitori di riboflavina. In primo luogo, la sintesi e la caratterizzazione di diverse 1,3,5-triazine sono riportate. In una seconda fase, viene descritta la funzionalizzazione di nanotubi di carbonio a parete singola e a parete multipla con le differenti triazine e anche con catene di p-tolil, impiegando le radiazioni microonde. Dopo, si riporta la caratterizzazione completa di questi derivati con varie tecniche. L’auto-assemblaggio degli ibridi è stato analizzato con microscopia elettronica a trasmissione, osservando come i funzionalizzati con 1,3,5-triazine formano buone dispersioni in acqua, mentre loro si auto-assemblano in solventi non polari a causa del riconoscimento di legami d’idrogeno complementari. Tuttavia, derivati funzionalizzati con p-tolil formano migliori dispersioni in solventi organici ed invece si auto-assemblano in acqua. Viene poi studiata la capacità dei nanotubi di carbonio funzionalizzati a parete multipla di riconoscere la riboflavina con la spettroscopia di fluorescenza e ultravioletta visibile, analizzando la grandezza delle interazioni non-covalenti. Si vede come la funzionalizzazione covalente dei nanotubi di carbonio diminuisce la loro capacità di formare interazioni mentre le interazioni di legame d’idrogeno giocano un ruolo fondamentale nel processo di riconoscimento tra i membri del sistema. Inoltre, si è demostrata l’influenza dei tipi di triazine nel comportamento della riboflavina. In questo modo, è dimostrata la modulazione del riconoscimento molecolare della riboflavina attraverso i diversi nanotubi. Così, recettori artificiali in processi di catalisi possono essere specificamente disegnati per ottenere il controllo delle interazioni tra i nanotubi di carbonio funzionalizzati e la riboflavina, modificando il suo comportamento. Inoltre, le dimensioni e le eccellenti proprietà di nanotubi permettono di utilizzarli come strumento nella progettazione di sensori per la rivelazione di singole molecole. Nel capitolo 3 si riporta la modifica di nanohorn di carbonio per l'impiego come farmaci selettivi nella terapia del cancro è rapportata. Prima, si mostra la sintesi e la caratterizzazione di diversi ibridi di nanohorn: Antibody-CNH, Drug-CNH, Antibody-Drug-CNH e Double Functionalized-CNH. In particolare vengono usati cisplatino, come profarmaco, ed un anticorpo specifico per le cellule che mostrano l’antigene PSMA (Prostate-specific membrane antigen). Di seguito, vengono presentati diversi esperimenti biologici sviluppati in collaborazione con il professor Marco Colombatti dell’Università degli Studi di Verona (Italia). L’ibrido Antibody-Drug-CNH possiede una migliore capacità di uccidere selettivamente le cellule che presentano l'antigene PSMA, rispetto ad altri derivati di nanohorns. Il nuovo sistema progettato offre un grande potenziale dato dalla possibilità di modificare il tipo e il grado di funzionalizzazione. Questo permette di variare la quantità di farmaco o di anticorpo nelle nanostrutture con lo scopo di migliorare l’efficienza dei nuovi derivati. Inoltre, questo metodo può incorporare altri farmaci o anticorpi al sistema, aprendo la porta al trattamento di altre malattie. Il capitolo 4 descrive l'applicazione di diverse nanostrutture di carbonio nella terapia genica. Prima, si mostra la funzionalizzazione di nanohorns di carbonio con gruppi amminici, impiegando diversi metodi che utilizzano le radiazioni a microonde (cicloaddizione 1,3-dipolare e addizione radicalica). In seguito, viene presentato il lavoro svolto in "the Nanomedicine Lab" (Università di Manchester), sotto la supervisione del Prof. Kostas Kostarelos. L'efficacia dei nanohorns di carbonio funzionalizzati per formare complessi con siRNA è comparata con quella dei nanotubi di carbonio forniti dal gruppo del professor Kostarelos. Si è visto come i nanohorn di carbonio formino complessi con siRNA a differenza dei nanotubi. I complessi siRNA/nanohorn si caratterizzano utilizzando varie tecniche e viene analizzata la loro capacità di rilasciare il siRNA. Sebbene nanohorn di carbonio funzionalizzati con l’addizione radicalica mostrano una forte interazione con il materiale genetico, i derivati funzionalizzati con la cicloaddizione 1,3-dipolare lo rilasciano più facilmente. I risultati suggeriscono che, per conseguire il miglior carrier, la complessazione totale del siRNA con le nanostrutture dovrebbe essere evitato. Tuttavia, gli ibridi devono essere analizzati in vitro per garantire la migliore scelta. Questo studio contribuisce alla comprensione dell’uso di nanohorn di carbonio come vettori per terapia genica; ma, un maggior numero di derivati deve essere analizzato per un confronto completo con i nanotubi di carbonio.
La nanotecnología se presenta como una nueva ciencia que podrá revolucionar multiples aspectos de nuestras vidas. Entre los numerosos campos en los que la nanotecnología está centrada, la búsqueda de energías renovables, la posibilidad de obtener agua limpia en cualquier parte del mundo, la mejora de la salud y la longevidad de las personas así como el avance de los sistemas informáticos, son los objetivos que más destacan. Las nanoestructuras de carbon son nanomateriales prometedores que pueden ayudar a lograr esas metas. Estos materiales incluyen fullerenos, grafeno, nanohorns y nanotubos de carbono, entre otros. Todos ellos presentan propiedades interesantes y ofrecen nuevas ventajas para aplicaciones en química de materiales y medicina. Nuestro grupo de investigación ha desarrollado metodologías interesantes para la modificación de esas nanoestructuras con el objeto de que puedan ser útiles en las aplicaciones citadas anteriormente. En ese contexto, el objetivo general de esta tesis es el diseño de sistemas multifuncionales basados en nanoestructuras de carbono para ser usados en sensores y en aplicaciones biológicas. En el capítulo 1 se detallan la estructura y las propiedades de los nanohorns y los nanotubos de carbono junto a sus aplicaciones. Además, se muestra un resumen de las diferentes metodologías usadas para su funcionalización. El reconocimiento molecular juega un papel importante en numerosos sistemas biológicos. En flavoproteinas, la interacción específica entre el cofactor flavina y la apoenzima determina la reactividad total de la proteina. De este modo, la modulación del entorno de la flavina puede usarse como herramienta para determinar su comportamiento y, además, para entender los procesos moleculares en las enzimas. Con esos objetivos en mente, en el capítulo 2 se describe la síntesis de diferentes derivados basados en el sistema nanotubo de carbono-triazina para usarlos como receptores múltiples de riboflavina. En primer lugar, se sintentizan y caracterizan distintas 1,3,5-triazinas. En un segundo paso, se funcionalizan nanotubos de carbono tanto de pared simple como de pared multiple con las diferentes triazinas así como con cadenas de p-tolilo usando radiación microondas, y esos derivados se caracterizan completamente mediante diversas técnicas. El autoensamblaje de los híbridos se analiza mediante microscopía de transmisión electrónica observando como los derivados de 1,3,5-triazinas forman buenas dispersiones en agua y se autoensamblan en disolventes no polares debido al reconocimiento mediante enlaces de hidrógeno complementarios. Sin embargo, los derivados de p-tolilo forman mejores dispersiones en disolventes orgánicos y se agregan en agua. Finalmente, la habilidad de los nanotubos de carbono de pared múltiple funcionalizados para reconocer la riboflavina se estudia mediante fluorescencia y espectrocopía ultravioleta visible, analizando el alcance de las interacciones no covalentes. La funcionalización covalente de nanotubos de carbono disminuye su habilidad para formar interacciones mientras que las interacciones mediante enlaces de hidrógeno juegan un papel fundamental en el proceso de reconocimiento entre los componentes del sistema. También se estudia la infuencia de las diferentes triazinas en el comportamiento de los complejos. De esta manera, se demuestra la modulación del reconocimiento de la riboflavina por medio de los diversos híbridos de nanotubos de carbono. Así, los receptores artificiales en procesos de catálisis pueden ser específicamente diseñados para lograr control de la interacción entre los nanotubos de carbono funcionalizados y la riboflavina, modificando así su comportamiento. En el capítulo 3 se describe la modificación de nanohorns de carbon para ser usados como fármacos selectivos en la terapia contra el cancer. En primer lugar se muestra la síntesis y caracterización de diferentes híbridos de nanohorns: Antibody-CNH, Drug-CNH, Antibody-Drug-CNH and Double Functionalized-CNH. En particular se usan cisplatino en forma de prodroga y un anticuerpo específico (D2B) para células de próstata que muestran el antígeno PSMA. Finalmente se presentan diferentes experimentos biológicos desarrollados en colaboración con el profesor Marco Colombatti, de la Universidad de Verona (Italia). Se demuestra la mejor habilidad del híbrido Antibody-Drug-CNH para matar selectivamente células que muestran el antígeno PSMA en comparación con los otros derivados de nanohorns. El nuevo sistema diseñado ofrece gran potencial debido la la posibilidad de modificar tanto el tipo como el grado de funcionalización. Esto permite variar la cantidad de fármaco o anticuerpo en la nanoestructura con el objetivo de conseguir una mejor eficacia del derivado. Además, con este método se pueden incorporar otros fármacos o anticuerpos al sistema, lo que abre la puerta al tratamiento de otras enfermedades. El capítulo 4 describe la aplicación de distintas nanoestructuras de carbono en terapia génica. Primero se muestra la funcionalización de nanohorns de carbono con grupos amino mediante diferentes metodologías usando radiación microondas (cicloadición 1,3-dipolar y adición radicálica). Después, se presenta el trabajo desarrollado en “the Nanomedicine Lab” (Universidad de Manchester) bajo la supervision del profesor Kostas Kostarelos. Se compara la eficacia de los nanohorns de carbono funcionalizados para formar complejos con siRNA con la de una serie de nanotubos de carbono aportados por el grupo del profesor Kostarelos. En nuestros experimentos, los nanohorns de carbon forman complejos mejor que los nanotubos. Los complejos siRNA/nanohorns se caracterizan mediante diversas técnicas y se analiza su capacidad de liberar el siRNA. Aunque los nanohorns de carbono funcionalizados mediante adición radicálica muestran una interacción más fuerte con el material genético, los derivados funcionalizados mediante cicloadición 1,3-dipolar lo liberan de manera más fácil. Los resultados sugieren que la complejación total entre el siRNA y la nanoestructura debe ser evitada para lograr más fácilmente el posterior desplazamiento de este dentro de la célula. Sin embargo, para garantizar la elección del híbrido más eficaz, los complejos deben ser analizados in vitro. Por tanto, este estudio contribuye al entendimiento de los nanohorns de carbono como vectores en terapia génica. No obstante, un mayor número de derivados deben ser analizados para lograr una comparación completa con los nanotubos de carbono.
Nanotechnology is claimed to revolutionize every aspect of our life. Among the large number of fields in which nanotechnology is involved; finding renewable clean energy, obtaining clean water for all, improving health and longevity and enhancing computing power are the most noteworthy. Carbon nanostructures are promising nanomaterials that can help to achieve these objectives. Fullerenes, graphene, nanohorns and nanotubes are including within these materials. All of them exhibit interesting properties and offer new opportunities for applications in material chemistry and medicine. Our research group has developed interesting methodologies for modifying these nanostructures in order to be used in the aforementioned applications. In this context, the objective of this thesis is the design of multifunctional systems based on carbon nanomaterials to be applied in sensors and in biological applications. Chapter 1 explains the structure, properties and applications of carbon nanohorns and carbon nanotubes, together with their applications. In addition, it provides an overview of the different methodologies to functionalize them. Molecular recognition plays an important role in numerous biological systems. In flavoproteins, the specific interaction between the flavin cofactor and the apoenzyme determines the reactivity of the entire protein. Therefore, the modulation of the environment of flavins can be used as a tool to set their behaviour and to understand the molecular processes in enzymes. With these aims, chapter 2 describes the synthesis of different carbon nanotubes-triazine derivatives to be used as multi-receptors of riboflavin. Firstly, different triazines are synthesized and characterized. In a second step, both single-walled and multi-walled carbon nanotubes are functionalized with different 1,3,5-triazine and p-tolyl chains using radical addition under microwave irradiation and these derivatives are characterized by different techniques. The self-assembly of these hybrids is analysed by transmission electron microscopy, observing how the 1,3,5-triazines derivatives form good dispersions in water and self-assemble in non-polar solvents due to the DAD-ADA hydrogen bonding recognition, while the p-tolyl derivatives show better dispersability in organic solvents and aggregate in polar solvents. Finally, the ability of the functionalized multi-walled carbon nanotubes to recognize riboflavin is studied by fluorescence and UV spectroscopy, analysing the scope of the different non-covalent interactions. It is shown that the functionalization of nanotubes by covalent approach decreases the ability of them to form stacking and also that the hydrogen bond interactions play an important role in the recognition processes between the components. The influence of the different triazines in the complexes is also shown. Thus, the modulation of the molecular recognition of riboflavin by the diverse nanotubes hybrids is demonstrated. Therefore, our study clarifies the understanding of non-covalent interactions in biological systems. In this way, artificial receptors in catalystic processes could be designed through a specific control of the interaction between functionalized carbon nanotubes and riboflavin. Additionally, the size and the excellent properties of carbon nanotubes will permit to use them as the building blocks in the design of sensors for single-molecule detection. In chapter 3, the modification of carbon nanohorns to be applied as new selective drugs in cancer therapy is shown. Firstly, the synthesis and characterization of different conjugates by the functionalization of carbon nanohorns with orthogonal chains is reported: Antibody-CNH, Drug-CNH, Antibody-Drug-CNH and Double Functionalized-CNH. In particular, cisplatin in a prodrug form and a specific D2B antibody for PSMA+ prostate cancer cells are attached. In collaboration with the group of Professor Marco Colombatti, different biological experiments are reported. The better ability of Antibody-Drug-CNH to selectively kill PSMA+ cancer cells in comparison with the other synthesized CNHs hybrids is demonstrated. This new system offers great potentiality due to the possibility of modifying the type and degree of functionalization. This allows the variation of the quantity of drug or antibody attached to the nanostructure in order to play with the killing efficacy. Similarly, the method is useful to attach different drugs or antibodies opening the way to the treatment of other diseases. Chapter 4 describes the application of different carbon nanostructures in gene delivery. Firstly, the functionalization of carbon nanohorns with amino moieties by different methodologies (1,3-dipolar cycloaddition and radical addition) under microwave irradiation and their characterization is shown. Then, the work developed at the Nanomedicine Lab (University of Manchester) under the supervision of Professor Kostas Kostarelos is reported. The efficacy of the functionalized carbon nanohorns to form complexes with siRNA is compared with the one of functionalized carbon nanotubes provides by Prof. Kostarelos’s group. In our experiments, carbon nanohorns form complexes better than nanotubes. The nanohors complexes are characterized by different techniques and their capability to release siRNA is analysed. Although the carbon nanohorns functionalized by radical addition showed the strongest complexation of siRNA, the derivatives functionalized by 1,3-dipolar cycloaddition showed its easiest release. The results suggest that, in order to obtain the best candidate, a complete complexation of siRNA with the carrier should be avoided. However, the analysis of the cellular uptake should be evaluated in the future to assess the greatest candidate. These outcomes contribute to the understanding of the role of carbon nanohorns as gene delivery vectors. Nevertheless, additional derivatives should be tested for a fully comparison with carbon nanotubes.
XXVII Ciclo
1986
Książki na temat "Carbon"
Fitzer, E., i Lalit M. Manocha. Carbon Reinforcements and Carbon/Carbon Composites. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/978-3-642-58745-0.
Pełny tekst źródłaFitzer, E. Carbon Reinforcements and Carbon/Carbon Composites. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998.
Znajdź pełny tekst źródłaFitzer, Erich. Carbon reinforcements and carbon /carbon composites. Berlin: Springer-Verlag, 1998.
Znajdź pełny tekst źródłaSavage, G. Carbon-Carbon Composites. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1586-5.
Pełny tekst źródłaSavage, G. Carbon-carbon composites. London: Chapman & Hall, 1993.
Znajdź pełny tekst źródłaSavage, G. Carbon-Carbon Composites. Dordrecht: Springer Netherlands, 1993.
Znajdź pełny tekst źródłaCenter, Langley Research, red. Carbon-carbon piston development. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.
Znajdź pełny tekst źródłaGorton, Mark P. Carbon-carbon piston development. Hampton, Va: Langley Research Center, 1994.
Znajdź pełny tekst źródłaBuckley, John D. Carbon-carbon materials and composites. Hampton, Va: Langley Research Center, 1992.
Znajdź pełny tekst źródłaR, Thomas C., i Royal Society of Chemistry (Great Britain), red. Essentials of carbon-carbon composites. Cambridge: Royal Society of Chemistry, 1993.
Znajdź pełny tekst źródłaCzęści książek na temat "Carbon"
Buckley, John D. "Carbon-Carbon Composites". W Handbook of Composites, 333–51. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-6389-1_16.
Pełny tekst źródłaGooch, Jan W. "Carbon-Carbon Composite". W Encyclopedic Dictionary of Polymers, 118. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_1939.
Pełny tekst źródłaPark, Soo-Jin. "Carbon/Carbon Composites". W Carbon Fibers, 279–94. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0538-2_8.
Pełny tekst źródłaMeyer, R. A., i S. R. Gyetvay. "Carbon-Carbon Composites". W ACS Symposium Series, 380–94. Washington, DC: American Chemical Society, 1986. http://dx.doi.org/10.1021/bk-1986-0303.ch025.
Pełny tekst źródłaThrower, Peter A. "Carbon-Carbon Composites". W Inorganic Reactions and Methods, 169–70. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2007. http://dx.doi.org/10.1002/9780470145333.ch119.
Pełny tekst źródłaAppleyard, S. P., i B. Rand. "Carbon-Carbon Composites". W Design and Control of Structure of Advanced Carbon Materials for Enhanced Performance, 183–206. Dordrecht: Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-010-1013-9_10.
Pełny tekst źródłaSavage, G. "Introduction". W Carbon-Carbon Composites, 1–36. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1586-5_1.
Pełny tekst źródłaSavage, G. "Technology Summary and Market Review". W Carbon-Carbon Composites, 361–83. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1586-5_10.
Pełny tekst źródłaSavage, G. "Carbon Fibres". W Carbon-Carbon Composites, 37–83. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1586-5_2.
Pełny tekst źródłaSavage, G. "Gas Phase Impregnation/Densification of Carbon-carbon and other High-temperature Composite Materials". W Carbon-Carbon Composites, 85–116. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1586-5_3.
Pełny tekst źródłaStreszczenia konferencji na temat "Carbon"
Raunija, Thakur Sudesh Kumar, i S. Babu. "Randomly oriented carbon/carbon composite". W CARBON MATERIALS 2012 (CCM12): Carbon Materials for Energy Harvesting, Environment, Nanoscience and Technology. AIP, 2013. http://dx.doi.org/10.1063/1.4810050.
Pełny tekst źródłaSides, Ken, i Gene Russell. "Roundabouts and Carbon Management". W Carbon Management Technology Conference. Carbon Management Technology Conference, 2012. http://dx.doi.org/10.7122/151264-ms.
Pełny tekst źródłaWhaley, Michael. "A Carbon Management Experience". W Carbon Management Technology Conference. Carbon Management Technology Conference, 2012. http://dx.doi.org/10.7122/151958-ms.
Pełny tekst źródłaLiu, Xiaoyu, Shu-Chien Hsu i Qingbin Cui. "Carbon Accounting Protocol in Construction". W Carbon Management Technology Conference. Carbon Management Technology Conference, 2012. http://dx.doi.org/10.7122/151336-ms.
Pełny tekst źródłaMadarasz, Valerie. "Carbon Accounting: A New Profession". W Carbon Management Technology Conference. Carbon Management Technology Conference, 2012. http://dx.doi.org/10.7122/151598-ms.
Pełny tekst źródłaAlavian, Sayyed Ahmad, i Curtis Hays Whitson. "Modeling CO2 Injection Including Diffusion in a Fractured-Chalk Experiment with Initial Water Saturation". W Carbon Management Technology Conference. Carbon Management Technology Conference, 2012. http://dx.doi.org/10.7122/149976-ms.
Pełny tekst źródłaYang, Yuelei, i Mark Malchiondo. "Design and Analysis of a Smart Energy Management System for Residential and Industrial Buildings". W Carbon Management Technology Conference. Carbon Management Technology Conference, 2012. http://dx.doi.org/10.7122/151358-ms.
Pełny tekst źródłaTao, Qing, i Steven Lawrence Bryant. "Optimal Control of Injection/Extraction Wells for the Surface Dissolution CO2 Storage Strategy". W Carbon Management Technology Conference. Carbon Management Technology Conference, 2012. http://dx.doi.org/10.7122/151370-ms.
Pełny tekst źródłaGarnham, Paul Jonathan, i Owain David Tucker. "The Longannet to Goldeneye Project: Challenges in Developing an End-to-End CCS Scheme". W Carbon Management Technology Conference. Carbon Management Technology Conference, 2012. http://dx.doi.org/10.7122/151716-ms.
Pełny tekst źródłaJiang, Xanglin, i Qingbin Cui. "Carbon Policy and Its Impact on Construction Firms". W Carbon Management Technology Conference. Carbon Management Technology Conference, 2012. http://dx.doi.org/10.7122/151721-ms.
Pełny tekst źródłaRaporty organizacyjne na temat "Carbon"
Gold, Phillip I. Electrical Resistivity of Carbon-Carbon Composites,. Fort Belvoir, VA: Defense Technical Information Center, luty 1988. http://dx.doi.org/10.21236/ada193006.
Pełny tekst źródłaJones, William D. Transition Metal Activation And Functionalization Of Carbon-Hydrogen And Carbon-Carbon Bonds. Office of Scientific and Technical Information (OSTI), październik 2019. http://dx.doi.org/10.2172/1569760.
Pełny tekst źródłaSchmidt, Donald L. Carbon-Carbon Composites (CCC) - A Historical Perspective. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 1996. http://dx.doi.org/10.21236/ada325314.
Pełny tekst źródłaHaack, David P. Scale-up of Carbon/Carbon Bipolar Plates. Office of Scientific and Technical Information (OSTI), kwiecień 2009. http://dx.doi.org/10.2172/950868.
Pełny tekst źródłaKoo, J. H., L. A. Pilato, C. U. Pittman, Winzek Jr. i P. Nanomodified Carbon/Carbon Composites for Intermediate Temperature. Fort Belvoir, VA: Defense Technical Information Center, styczeń 2004. http://dx.doi.org/10.21236/ada419919.
Pełny tekst źródłaDresselhaus, M. S., i J. Steinbeck. Liquid Carbon. Fort Belvoir, VA: Defense Technical Information Center, październik 1987. http://dx.doi.org/10.21236/ada191707.
Pełny tekst źródłaDr. Habil. Böcskei, Elvira, i Emese Dr. Ilyésné Dr. Molnár. Carbon accounting. Budapest: BME, sierpień 2022. http://dx.doi.org/10.3311/bmemnb2022-203.
Pełny tekst źródłaDr. Habil. Böcskei, Elvira, i Emese Dr. Ilyésné Dr. Molnár. Carbon accounting. Budapest: BME, sierpień 2022. http://dx.doi.org/10.3311/bmemnb2021-203.
Pełny tekst źródłaHooker, Helen, i Jonathan Wentworth. Carbon offsetting. Parliamentary Office of Science and Technology, styczeń 2024. http://dx.doi.org/10.58248/pn713.
Pełny tekst źródłaWang, H., i R. B. Dinwiddie. Thermal diffusivity mapping of 4D carbon-carbon composites. Office of Scientific and Technical Information (OSTI), marzec 1997. http://dx.doi.org/10.2172/446404.
Pełny tekst źródła