Gotowe bibliografie tematyczne / CAD / Artykuły w czasopismach

Artykuły w czasopismach na temat „CAD”

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: CAD.
Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 29 lipca 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „CAD”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

KASE, Kiwamu. "An Introduction of Outline of CAD/CAE/CAM/CAT (1)". Journal of the Japan Society for Precision Engineering 79, nr 2 (2013): 144–47. http://dx.doi.org/10.2493/jjspe.79.144.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

KASE, Kiwamu. "An Introduction of Outline of CAD/CAE/CAM/CAT (2)". Journal of the Japan Society for Precision Engineering 79, nr 3 (2013): 223–26. http://dx.doi.org/10.2493/jjspe.79.223.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

KASE, Kiwamu. "An Introduction of Outline of CAD/CAE/CAM/CAT (3)". Journal of the Japan Society for Precision Engineering 79, nr 4 (2013): 309–13. http://dx.doi.org/10.2493/jjspe.79.309.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Netto, Jeffrey, Andrej Teren, Ralph Burkhardt, Anja Willenberg, Frank Beutner, Sylvia Henger, Gerhard Schuler i in. "Biomarkers for Non-Invasive Stratification of Coronary Artery Disease and Prognostic Impact on Long-Term Survival in Patients with Stable Coronary Heart Disease". Nutrients 14, nr 16 (20.08.2022): 3433. http://dx.doi.org/10.3390/nu14163433.

Pełny tekst źródła
Streszczenie:
Knowledge about cardiac and inflammatory biomarkers in patients with stable coronary artery disease (CAD) is limited. To address this, we analyzed 3072 patients (36% female) with a median follow-up of 10 years in the Leipzig LIFE Heart Study with suspected CAD with coronary angiography. Selected biomarkers included troponin T (hsTNT), N-terminal pro B-type natriuretic peptide (NT-proBNP), copeptin, C-reactive protein (hsCRP), and interleukin-6 (IL-6). Patients were stratified by CAD severity: CAD0 (no sclerosis), CAD1 (non-obstructive, i.e., stenosis < 50%), and CAD2 (≥one stenosis ≥ 50%). Group comparison (GC) included GC1: CAD0 + 1 vs. CAD2; GC2: CAD0 vs. CAD1 + 2. CAD0, CAD1, and CAD2 were apparent in 1271, 631, and 1170 patients, respectively. Adjusted for classical risk factors, hs-cTnT, NT-proBNP, and IL-6 differed significantly in both GC and hsCRP only in GC2. After multivariate analysis, hs-cTnT, NT-proBNP, and IL-6 remained significant in GC1. In GC2, hs-cTnT (p < 0.001) and copeptin (p = 0.014) reached significance. Ten-year survival in groups CAD0, CAD1, and CAD2 was 88.3%, 77.3%, and 72.4%. Incorporation of hs-cTnT, NT-proBNP, copeptin, and IL-6 improved risk prediction (p < 0.001). The studied cardiac and inflammatory biomarkers enable fast and precise non-invasive identification of mortality risk in CAD patients, allowing the tailoring of primary and secondary CAD prevention.
Style APA, Harvard, Vancouver, ISO itp.
5

GAO, Sande, i Atsushi KATO. "3209 Research on CAD/CAE/CAM for a Die Cast". Proceedings of Design & Systems Conference 2007.17 (2007): 311–14. http://dx.doi.org/10.1299/jsmedsd.2007.17.311.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Sbrana, Silverio, Jonica Campolo, Alberto Clemente, Luca Bastiani, Antonella Cecchettini, Elisa Ceccherini, Chiara Caselli i in. "Blood Monocyte Phenotype Fingerprint of Stable Coronary Artery Disease: A Cross-Sectional Substudy of SMARTool Clinical Trial". BioMed Research International 2020 (27.07.2020): 1–11. http://dx.doi.org/10.1155/2020/8748934.

Pełny tekst źródła
Streszczenie:
Background and Aims. Atherosclerosis is an inflammatory disease with long-lasting activation of innate immunity and monocytes are the main blood cellular effectors. We aimed to investigate monocyte phenotype (subset fraction and marker expression) at different stages of coronary atherosclerosis in stable coronary artery disease (CAD) patients. Methods. 73 patients with chronic coronary syndrome were evaluated by CT coronary angiography (CTCA) and classified by maximal diameter stenosis of major vessels into three groups of CAD severity: CAD1 (no CAD/minimal CAD, n°=30), CAD2 (non-obstructive CAD, n°=21), and CAD3 (obstructive CAD, n°=22). Flow cytometry for CD14, CD16, and CCR2 was used to quantify Mon1, Mon2, and Mon3 subsets. Expression of CD14, CD16, CD18, CD11b, HLA-DR, CD163, CCR2, CCR5, CX3CR1, and CXCR4 was also measured. Adhesion molecules and cytokines were quantified by ELISA. Results. Total cell count and fraction of Mon2 were higher in CAD2 and CAD3 compared to CAD1. By multivariate regression analysis, Mon2 cell fraction and Mon2 expression of CX3CR1, CD18, and CD16 showed a statistically significant and independent increase, parallel to stenosis severity, from CAD1 to CAD2 and CAD3 groups. A similar trend was also present for CX3CR1 and HLA-DR expressions on total monocyte population. A less calcified plaque composition was associated to a higher Mon2 expression of CD16 and higher TNF-α levels. IL-10 levels were lower at greater stenosis severity, while the IFN-γ/IL-10 ratio, a marker of a systemic pro-inflammatory imbalance, was directly correlated to stenosis degree and number of noncalcified plaques. Conclusions. The results of this study suggest that a specific pattern of inflammation-correlated monocyte marker expression is associated to higher stenosis severity and less calcified lesions in stable CAD. The clinical trial Identifier is NCT04448691.
Style APA, Harvard, Vancouver, ISO itp.
7

HAGIWARA, Ichiro. "341 Present Status and Future Prospect of CAD/CAE". Proceedings of The Computational Mechanics Conference 2006.19 (2006): 433–34. http://dx.doi.org/10.1299/jsmecmd.2006.19.433.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Tagowski, Michał, i Andrzej Zaborski. "Manufacturing preparation of details using CAD and CAD/CAM software". Mechanik, nr 7 (lipiec 2015): 568/849–568/856. http://dx.doi.org/10.17814/mechanik.2015.7.305.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Babu, Numbury Surendra, i Didugu Jayaprakash. "Computational Study of the Stability of Tautomers and equilibrium constants of Cyanuric acid (CA) in Different solvents." JOURNAL OF ADVANCES IN CHEMISTRY 11, nr 2 (22.01.2015): 3485–97. http://dx.doi.org/10.24297/jac.v11i2.6691.

Pełny tekst źródła
Streszczenie:
In the present investigation, the tautomeric and equilibrium of Cyanuric acid has been studied using Hartifock (HF) method in the gas phase and different solvents using the PCM model. The relative energies of these tautomers have been calculated at the HF level of theory using 6-311++ G (d,p) basis set. Energetics and relative stabilities of the tautomers were compared and analyzed in both the gaseous and different solvents. The results indicate that the keto tautomer (CA1) is the most stable form in the gas phase and other solvents. The order of stability of isomers was found to be CA1 > CA3> CA11> CA2> CA6> CA10> CA7> CA4> CA5> CA9>CA8. Having the largest dipole moment the CA8 tautomer is expected to have the strongest interaction with polar solvents. The HF method calculated tautomeric equilibrium constants with respect to the most stable tautomer CA1 of Cyanuric acid both in the gas and in different solvents. The of the equilibrium constants calculated starting from the general outline of interconversion.
Style APA, Harvard, Vancouver, ISO itp.
10

MANAGAKI, Masao. "CAD/CAM Database Systems". Journal of the Society of Mechanical Engineers 91, nr 833 (1988): 331–37. http://dx.doi.org/10.1299/jsmemag.91.833_331.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
11

Li, Jiping, Junichi Shinoda i Ichiro Hagiwara. "530 The Development of TIT CADE for CAD Data Exchange". Proceedings of the JSME annual meeting 2005.1 (2005): 29–30. http://dx.doi.org/10.1299/jsmemecjo.2005.1.0_29.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
12

HASHIGUCHI, Junichi. "Sample of CAD/CAM/CAE in Injection Mold". Journal of the Japan Society for Precision Engineering 77, nr 7 (2011): 644–47. http://dx.doi.org/10.2493/jjspe.77.644.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
13

KOYAMA, Junichi, Hitoshi OMATA, Yasushi YAMAYA, Yingjun JIN i Atsushi OGATA. "Application of CAD/CAM/CAE to Manufacturing Tools for Bending Machine". Journal of the Japan Society for Technology of Plasticity 49, nr 568 (2016): 389–94. http://dx.doi.org/10.9773/sosei.49.389.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
14

Suese, Kazuhiko, i Kazuhiro Hikita. "Digital Dentistry Based on CAD/CAM System". Annals of Japan Prosthodontic Society 4 (2012): 121–22. http://dx.doi.org/10.2186/ajps.4.121.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
15

ŞEN, Nazmiye, i Betül TUNCELLİ. "Materials Used for CAD/CAM Restorations: Review". Turkiye Klinikleri Journal of Dental Sciences 23, nr 2 (2017): 109–15. http://dx.doi.org/10.5336/dentalsci.2016-53389.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
16

Nah, Jung-Sook. "Changes in the Usage of Dental Technology CAD/CAM". Journal of Korean Acedemy of Dental Technology 37, nr 4 (31.12.2015): 271–84. http://dx.doi.org/10.14347/kadt.2015.37.4.271.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
17

MASUDA, Takatoshi, Toshio NAGASHIMA i Noboru IMAI. "616 Development of a prototype CAE system using V-CAD Framework". Proceedings of The Computational Mechanics Conference 2005.18 (2005): 299–300. http://dx.doi.org/10.1299/jsmecmd.2005.18.299.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
18

Kang, Wol, Man-So Han i Ji-Hwan Kim. "Effect of CAD/CAM ceramic thickness on shade". Journal of Korean society of Dental Hygiene 16, nr 5 (31.10.2016): 695–700. http://dx.doi.org/10.13065/jksdh.2016.16.05.695.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
19

HIRAI, Shunsuke, i Yoshihiro TERAMURA. "3211 Modeling approach for the design process with 3D CAD". Proceedings of Design & Systems Conference 2007.17 (2007): 319–22. http://dx.doi.org/10.1299/jsmedsd.2007.17.319.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
20

KAMIMURA, Tadayuki. "2507 Product Design Education Using 3D CAD/CAM/CAE". Proceedings of Design & Systems Conference 2010.20 (2010): _2507–1_—_2507–2_. http://dx.doi.org/10.1299/jsmedsd.2010.20._2507-1_.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
21

AOYAMA, Hideki. "Trend of 3D CAD/CAM Systems". Journal of the Japan Society for Technology of Plasticity 48, nr 562 (2007): 1002–6. http://dx.doi.org/10.9773/sosei.48.1002.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
22

Czech-Dudek, Katarzyna. "Application systems CAD/CAM in the preparation of production". Mechanik, nr 7 (lipiec 2015): 558/149–558/158. http://dx.doi.org/10.17814/mechanik.2015.7.224.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
23

Anciferov, S., A. Karachevceva i L. Sivachenko. "DESIGN AND PRODUCT DESIGN IN CAD/CAM/CAE NX SYSTEM MANAGED BY TEAMCENTER PLM SYSTEM". Technical Aesthetics and Design Research 1, nr 2 (24.12.2020): 45–52. http://dx.doi.org/10.34031/2687-0878-2019-1-2-45-52.

Pełny tekst źródła
Streszczenie:
The article discusses a system widely implemented in the designing of equipment for the NX construction industry. Along with this system, a modern automation tool was used. The most common and most used products are Siemens products: PLM-system "Teamcenter". The functionality of this configuration is huge, it includes such applications a "Manager of Structure", "Classifier", "Advanced Studio", "Ray Tracing Studio", etc. For example, it is possible to create a single product structure with various configurations, machine components and assemblies, using the "Structure Manager". This structure allows to simplify the introduction of changes and the development of a digital electronic model. For the final visualization and rendering, the NX system provides a certain set of tools, which includes "Extended Studio" and "Ray Tracing Studio". "Advanced Studio" is an application allowing to get high-quality image, including the effects of materials, textures, lighting, shadows and reflections for the product in the CAD/CAM/CAE NX system. "Ray Tracing Studio" allows to get the rendering of the future product. In the Ray Tracing Studio editor, it is possible to configure such parameters as dynamic tracing setting, real-time ray tracing setting, display static high-quality tracing setting, and general display settings. Creation of a product in this system can be considered by the example of a digital electronic model of a roller support.
Style APA, Harvard, Vancouver, ISO itp.
24

Sun, Qianlong, Xin Zhang, Ying Ouyang, Pingzhong Yu, Yilong Man, Sheng Guo, Sizhen Liu, Yue Chen, Yunsheng Wang i Xinqiu Tan. "Appressoria Formation in Phytopathogenic Fungi Suppressed by Antimicrobial Peptides and Hybrid Peptides from Black Soldier Flies". Genes 14, nr 5 (17.05.2023): 1096. http://dx.doi.org/10.3390/genes14051096.

Pełny tekst źródła
Streszczenie:
Antimicrobial peptides (AMPs) from black solider flies (Hermetia illucens, BSF) exhibiting broad-spectrum antimicrobial activity are the most promising green substitutes for preventing the infection of phytopathogenic fungi; therefore, AMPs have been a focal topic of research. Recently, many studies have focused on the antibacterial activities of BSF AMPs against animal pathogens; however, currently, their antifungal activities against phytopathogenic fungi remain unclear. In this study, 7 AMPs selected from 34 predicted AMPs based on BSF metagenomics were artificially synthesized. When conidia from the hemibiotrophic phytopathogenic fungi Magnaporthe oryzae and Colletotrichum acutatum were treated with the selected AMPs, three selected AMPs—CAD1, CAD5, and CAD7—showed high appressorium formation inhibited by lengthened germ tubes. Additionally, the MIC50 concentrations of the inhibited appressorium formations were 40 μM, 43 μM, and 43 μM for M. oryzae, while 51 μM, 49 μM, and 44 μM were observed for C. acutatum, respectively. A tandem hybrid AMP named CAD-Con comprising CAD1, CAD5, and CAD7 significantly enhanced antifungal activities, and the MIC50 concentrations against M. oryzae and C. acutatum were 15 μM and 22 μM, respectively. In comparison with the wild type, they were both significantly reduced in terms of virulence when infection assays were performed using the treated conidia of M. oryzae or C. acutatum by CAD1, CAD5, CAD7, or CAD-Con. Meanwhile, their expression levels of CAD1, CAD5, and CAD7 could also be activated and significantly increased after the BSF larvae were treated with the conidia of M. oryzae or C. acutatum, respectively. To our knowledge, the antifungal activities of BSF AMPs against plant pathogenic fungi, which help us to seek potential AMPs with antifungal activities, provide proof of the effectiveness of green control strategies for crop production.
Style APA, Harvard, Vancouver, ISO itp.
25

YAMADA, Hiroyuki. "A practical methodology of utilizing CAD/CAM system". International Conference on Business & Technology Transfer 2006.3 (2006): 140–45. http://dx.doi.org/10.1299/jsmeicbtt.2006.3.0_140.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
26

Ali, Nur Shidaa Mohd, Abu Bakar Salleh, Thean Chor Leow, Raja Noor Zaliha Raja Abd Rahman i Mohd Shukuri Mohamad Ali. "The Influence of Calcium toward Order/Disorder Conformation of Repeat-in-Toxin (RTX) Structure of Family I.3 Lipase from Pseudomonas fluorescens AMS8". Toxins 12, nr 9 (9.09.2020): 579. http://dx.doi.org/10.3390/toxins12090579.

Pełny tekst źródła
Streszczenie:
Calcium-binding plays a decisive role in the folding and stabilization of many RTX proteins, especially for the RTX domain. Although many studies have been conducted to prove the contribution of Ca2+ ion toward the folding and stabilization of RTX proteins, its functional dynamics and conformational structural changes remain elusive. Here, molecular docking and molecular dynamics (MD) simulations were performed to analyze the contribution of Ca2+ ion toward the folding and stabilization of the RTX lipase (AMS8 lipase) structure. AMS8 lipase contains six Ca2+ ions (Ca1–Ca6). Three Ca2+ ions (Ca3, Ca4, and Ca5) were bound to the RTX parallel β-roll motif repeat structure (RTX domain). The metal ion (Ca2+) docking analysis gives a high binding energy, especially for Ca4 and Ca5 which are tightly bound to the RTX domain. The function of each Ca2+ ion is further analyzed using the MD simulation. The removal of Ca3, Ca4, and Ca5 caused the AMS8 lipase structure to become unstable and unfolded. The results suggested that Ca3, Ca4, and Ca5 stabilized the RTX domain. In conclusion, Ca3, Ca4, and Ca5 play a crucial role in the folding and stabilization of the RTX domain, which sustain the integrity of the overall AMS8 lipase structure.
Style APA, Harvard, Vancouver, ISO itp.
27

Inagaki, Atsuko, Yoshitaka Takano, Yasuyuki Kubo, Kazuyuki Mise i Iwao Furusawa. "Construction of an equalized cDNA library fromColletotrichum lagenariumand its application to the isolation of differentially expressed genes". Canadian Journal of Microbiology 46, nr 2 (1.02.2000): 150–58. http://dx.doi.org/10.1139/w99-119.

Pełny tekst źródła
Streszczenie:
To establish an efficient screening system for differentially expressed genes of a phytopathogenic fungus Colletotrichum lagenarium, we constructed an equalized (normalized) cDNA library from C. lagenarium and used this library for differential screening. For the isolation of genes involved in infection-related developments of conidia, conidia undergoing appressorium differentiation were selected as the source of materials for construction of the cDNA library. The equalization of cDNA was performed twice using a kinetic method, and the products were cloned into a plasmid vector. Colony hybridization with nine probes of different abundance showed a reduction in abundance variation from at least 276-fold in the original library to 10-fold in the equalized cDNA library, which demonstrated that the cDNA was successfully equalized. By differential hybridization of 1900 cDNA clones in the equalized cDNA library and RNA blot analysis of candidate clones, we identified 11 independent cDNA clones, designated CAD1 through CAD11, that were expressed in appressorium-differentiating conidia, but not in vegetative mycelia. The transcripts of CAD1 and CAD2 hardly accumulated in preincubated conidia, whereas those of CAD3 and CAD4 accumulated highly and slightly, respectively. The amount of the four CAD transcripts increased at the early stage of the appressorium formation process. Sequence analysis of CAD1 revealed that CAD1 would encode for 101 amino acid polypeptides, which showed homology to metallothioneins. Deduced amino acid sequence of CAD2 would encode 278 amino acid polypeptides, and showed high homology to genes in aflatoxin, and sterigmatocystin gene clusters of Aspergillus parasiticus and A. nidulans, respectively. Key words: equalized cDNA library, differential screening, Colletotrichum lagenarium, appressorium formation, CAD genes.
Style APA, Harvard, Vancouver, ISO itp.
28

Badawy, Rania, Omar El-Mowafy i Laura Tam. "Flexural Properties of Chairside CAD/CAM Materials". Dental and Medical Problems 53, nr 2 (2016): 230–35. http://dx.doi.org/10.17219/dmp/62196.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
29

SOTÁK, Vladimír, Martin KUNÍK i Robert SOTÁK. "CAD/CAM SYSTEMS IN EDUCATION IN SECONDARY ENGINEERING SCHOOLS". Journal of Technology and Information 2, nr 2 (1.08.2010): 51–54. http://dx.doi.org/10.5507/jtie.2010.034.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
30

Piotrowski, Andrzej, i Piotr Boral. "Integrated CAD/CAM systems in the production set-up". Mechanik, nr 7 (lipiec 2016): 798–99. http://dx.doi.org/10.17814/mechanik.2016.7.178.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
31

NAGASAKA, Yasumi. "312 Development of Educational CAD/CAM Teaching Materials by Animation Technique : Practical Use of CAD/CAM Teaching Materials". Proceedings of the Tecnology and Society Conference 2011 (2011): 43–44. http://dx.doi.org/10.1299/jsmetsd.2011.43.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
32

Unseld, Robert. "CAD". ATZelektronik 17, nr 10 (październik 2022): 3. http://dx.doi.org/10.1007/s35658-022-0826-9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
33

Unseld, Robert. "CAD". ATZelectronics worldwide 17, nr 10 (7.10.2022): 3. http://dx.doi.org/10.1007/s38314-022-0827-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
34

Waters, Michael. "Cad". Hopkins Review 9, nr 2 (2016): 257. http://dx.doi.org/10.1353/thr.2016.0051.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
35

Sell, Irene L. "CAD". American Journal of Nursing 97, nr 12 (grudzień 1997): 16GG. http://dx.doi.org/10.1097/00000446-199712000-00020.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
36

Murase, K., H. Hamakawa i H. Yamada. "Development of 3D-CAD System for Artificial Joint Replacement". Proceedings of the JSME annual meeting 2004.6 (2004): 91–92. http://dx.doi.org/10.1299/jsmemecjo.2004.6.0_91.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
37

Kochan, D., i J. Sandig. "CAD/NC-Kopplungen / CAD/NEC linkups". Zeitschrift für wirtschaftlichen Fabrikbetrieb 85, nr 3 (1.03.1990): 155–59. http://dx.doi.org/10.1515/zwf-1990-850320.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
38

Walter, W. "CAD-NC-Kopplung mit CAD-Funktionalität". Zeitschrift für wirtschaftlichen Fabrikbetrieb 84, nr 1 (1.01.1989): 38–42. http://dx.doi.org/10.1515/zwf-1989-840126.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
39

KIMURA, Fumihiko. "CAD/CAM : Mathematical Models and Information Processing". Journal of the Society of Mechanical Engineers 93, nr 862 (1990): 754–58. http://dx.doi.org/10.1299/jsmemag.93.862_754.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
40

Uhm, Tae-Kyoung, Ki-Seung Kim, Yu-Deok Seo i Sung-Kie Youn. "T-spline Finite Element Method for CAD/CAE Integrated Approach". Transactions of the Korean Society of Mechanical Engineers A 33, nr 2 (1.02.2009): 127–34. http://dx.doi.org/10.3795/ksme-a.2009.33.2.127.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
41

Kunigahalli, Raghavan, i Jeffrey S. Russell. "Framework for development of CAD/CAC systems". Automation in Construction 3, nr 4 (styczeń 1995): 327–40. http://dx.doi.org/10.1016/0926-5805(94)00039-p.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
42

Cywoniuk, Edyta, Teresa Sierpińska i Magdalena Sulewska. "Complete removable dentures manufacturing in CAD/CAM: literature review". Prosthodontics 71, nr 4 (15.12.2021): 332–42. http://dx.doi.org/10.5114/ps/144231.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
43

SHINODA, Junichi, i Ichiro HAGIWARA. "The Integrated CAD/CAE System in the Next Generation". Proceedings of Design & Systems Conference 2002.12 (2002): 321–22. http://dx.doi.org/10.1299/jsmedsd.2002.12.321.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
44

Ku, Seung-Won, Jong-Hwan Park i Yeong-Mu Ko. "Mechanical Properties of Ceramic/Polymer Blocks for CAD/CAM Dental Restoration". Korean Journal of Dental Materials 44, nr 2 (30.06.2017): 107–17. http://dx.doi.org/10.14815/kjdm.2017.44.2.107.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
45

Fan, Wenjun, Ying Zhang, Yixiang Liu, Zhenjiang Ding, Yueqiao Si, Fei Shi, Jingyi Liu i Lixian Sun. "Nomograms Based on the Advanced Lung Cancer Inflammation Index for the Prediction of Coronary Artery Disease and Calcification". Clinical and Applied Thrombosis/Hemostasis 27 (styczeń 2021): 107602962110604. http://dx.doi.org/10.1177/10760296211060455.

Pełny tekst źródła
Streszczenie:
Aim To develop and validate 3 nomograms incorporating the advanced lung cancer inflammation index (ALI) that can aid in predicting the risk of coronary artery disease (CAD) and coronary artery calcification (CAC). Methods The study enrolled 562 consecutive patients with suspected CAD who underwent coronary computed tomographic angiography between September 2015 and June 2017. Independent risk factors for CAD, CAC, and CAD with CAC were identified via univariate and multivariate analysis, and nomograms were established based on the independent predictors identified. The area under the curve (AUC), calibration curve, and decision curve analysis were used to evaluate the nomograms. Correlations between ALI and other clinical indicators were examined via Spearman correlation analysis. Results In total, 549 patients with suspected CAD who underwent coronary computed tomographic angiography were included. Male sex, hypertension, diabetes, dyslipidemia, ischemic stroke, and ALI were independent predictors of both CAD and CAC. Male sex, hypertension, diabetes, dyslipidemia, and ALI were also identified as independent predictors of CAD with CAC. The AUC values for the nomograms developed using these risk factors were 0.739 (95% confidence interval [CI], 0.693-0.785), 0.728 (95% CI, 0.684-0.772), and 0.717 (95% CI 0.673-0.761), respectively. ALI was negatively correlated with neutrophil-to-lymphocyte ratio and CAC score and positively correlated with serum albumin levels and body mass index (all P < .05). Conclusions ALI is an independent predictor of CAD, CAC, and CAD with CAC. Our ALI-based nomograms can provide accurate and individualized risk predictions for patients with suspected CAD.
Style APA, Harvard, Vancouver, ISO itp.
46

NOMURA, Daiji, Masaaki TAKAHASHI i Hiroyuki MATSUMOTO. "313 CAD/CAE education that uses software". Proceedings of the Dynamics & Design Conference 2009 (2009): _313–1_—_313–7_. http://dx.doi.org/10.1299/jsmedmc.2009._313-1_.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
47

KAWAMURA, Yoshinori, Susumu FURUKAWA, Muneto KUBOTA, Rinzo IRIE i Isamu YANAGIBA. "508 A device for managing data of luggage on a shelf". Proceedings of Yamanashi District Conference 2000 (2000): 137–38. http://dx.doi.org/10.1299/jsmeyamanashi.2000.137.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
48

NIIMI, Takeo. "CAD. Digital circuit design using CAD system." Circuit Technology 2, nr 4 (1987): 263–66. http://dx.doi.org/10.5104/jiep1986.2.263.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
49

Gisi, Mark A., i Cristiano Sacchi. "Co-CAD: A Collaborative Mechanical CAD System". Presence: Teleoperators and Virtual Environments 3, nr 4 (styczeń 1994): 341–50. http://dx.doi.org/10.1162/pres.1994.3.4.341.

Pełny tekst źródła
Streszczenie:
It is becoming increasingly common for manufacturing design teams to be composed of members belonging to the same organization, yet located in geographically different places. This has significantly increased the need for better support of synchronous communication among team members collaborating over a design. Unfortunately, there is a considerable technological gap in the support for collaborative, synchronously communicating mechanical CAD systems. In this paper we describe a prototype system, CoCAD, that provides a number of features that support synchronous collaboration among a number of mechanical CAD engineers located at different sites. Some of these features include the ability for each person to edit a design, the ability for each user to customize their local view of a design, the ability for each user to share a common view of a design, a shared pointer, the ability for someone to join in the middle of a design session, and object ownership and access permissions.
Style APA, Harvard, Vancouver, ISO itp.
50

Lee, G. L. "Managing change with CAD and CAD/CAM". IEEE Transactions on Engineering Management 36, nr 3 (1989): 227–33. http://dx.doi.org/10.1109/17.35327.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany bibliografiami na temat „CAD” dla innych typów źródeł:
Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii