Zaloguj się

Gotowe bibliografie tematyczne / CAD tools / Artykuły w czasopismach

Artykuły w czasopismach na temat „CAD tools”

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: CAD tools.

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 14 marca 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „CAD tools”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

KOYAMA, Junichi, Hitoshi OMATA, Yasushi YAMAYA, Yingjun JIN i Atsushi OGATA. "Application of CAD/CAM/CAE to Manufacturing Tools for Bending Machine". Journal of the Japan Society for Technology of Plasticity 49, nr 568 (2016): 389–94. http://dx.doi.org/10.9773/sosei.49.389.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Sandmaier, H., H. L. Offereins i B. Folkmer. "CAD tools for micromechanics". Journal of Micromechanics and Microengineering 3, nr 3 (1.09.1993): 103–6. http://dx.doi.org/10.1088/0960-1317/3/3/001.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Newton, A. R., i A. L. Sangiovanni-Vincentelli. "CAD tools for ASIC design". Proceedings of the IEEE 75, nr 6 (1987): 765–76. http://dx.doi.org/10.1109/proc.1987.13798.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Séquin, Carlo H. "CAD Tools for Aesthetic Engineering". Computer-Aided Design and Applications 1, nr 1-4 (styczeń 2004): 301–9. http://dx.doi.org/10.1080/16864360.2004.10738271.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Piguet, C., i E. Dijkstra. "Design methodologies and CAD tools". Integration 10, nr 3 (luty 1991): 219–50. http://dx.doi.org/10.1016/s0167-9260(05)80020-3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Séquin, Carlo H. "CAD tools for aesthetic engineering". Computer-Aided Design 37, nr 7 (czerwiec 2005): 737–50. http://dx.doi.org/10.1016/j.cad.2004.08.011.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

FUJITA, Shigeru, i Etsuo SHOJI. "CAD Systems as Collaboration Tools". Journal of the Japanese Institute of Landscape Architecture 64, nr 3 (2000): 224–27. http://dx.doi.org/10.5632/jila.64.224.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

De Micheli, G. "Extending CAD tools and techniques". Computer 26, nr 1 (styczeń 1993): 85–87. http://dx.doi.org/10.1109/2.179166.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Saito, Kazuyuki. "CAD/CAE Tools for 3D Jisso Module". Journal of Japan Institute of Electronics Packaging 15, nr 4 (2012): 259–62. http://dx.doi.org/10.5104/jiep.15.259.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Wang, Charlie C. L. "CAD Tools in Fashion/Garment Design". Computer-Aided Design and Applications 1, nr 1-4 (styczeń 2004): 53–62. http://dx.doi.org/10.1080/16864360.2004.10738243.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Tyssø, A., i L. Kolbeinsen. "Practical CAD Tools for Mathematical Modelling". IFAC Proceedings Volumes 18, nr 8 (lipiec 1985): 343–47. http://dx.doi.org/10.1016/s1474-6670(17)60393-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Milford, D., i N. Kingswood. "CAD tools for semicustom IC design". Microprocessors and Microsystems 12, nr 7 (wrzesień 1988): 363–72. http://dx.doi.org/10.1016/0141-9331(88)90141-x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Gilbert, J. R. "Integrating CAD tools for MEMS design". Computer 31, nr 4 (kwiecień 1998): 99–101. http://dx.doi.org/10.1109/2.666845.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Culverhouse, P. F. "Constraining designers and their CAD tools". Design Studies 16, nr 1 (styczeń 1995): 81–101. http://dx.doi.org/10.1016/0142-694x(95)90648-y.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Puers, B., E. Peeters i W. Sansen. "CAD tools in mechanical sensor design". Sensors and Actuators 17, nr 3-4 (maj 1989): 423–29. http://dx.doi.org/10.1016/0250-6874(89)80029-0.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Sebova, Katarina, i Ivana Fridrichova. "Epigenetic tools in potential anticancer therapy". Anti-Cancer Drugs 21, nr 6 (lipiec 2010): 565–77. http://dx.doi.org/10.1097/cad.0b013e32833a4352.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Anciferov, S., A. Karachevceva i L. Sivachenko. "DESIGN AND PRODUCT DESIGN IN CAD/CAM/CAE NX SYSTEM MANAGED BY TEAMCENTER PLM SYSTEM". Technical Aesthetics and Design Research 1, nr 2 (24.12.2020): 45–52. http://dx.doi.org/10.34031/2687-0878-2019-1-2-45-52.

Pełny tekst źródła

Streszczenie:

The article discusses a system widely implemented in the designing of equipment for the NX construction industry. Along with this system, a modern automation tool was used. The most common and most used products are Siemens products: PLM-system "Teamcenter". The functionality of this configuration is huge, it includes such applications a "Manager of Structure", "Classifier", "Advanced Studio", "Ray Tracing Studio", etc. For example, it is possible to create a single product structure with various configurations, machine components and assemblies, using the "Structure Manager". This structure allows to simplify the introduction of changes and the development of a digital electronic model. For the final visualization and rendering, the NX system provides a certain set of tools, which includes "Extended Studio" and "Ray Tracing Studio". "Advanced Studio" is an application allowing to get high-quality image, including the effects of materials, textures, lighting, shadows and reflections for the product in the CAD/CAM/CAE NX system. "Ray Tracing Studio" allows to get the rendering of the future product. In the Ray Tracing Studio editor, it is possible to configure such parameters as dynamic tracing setting, real-time ray tracing setting, display static high-quality tracing setting, and general display settings. Creation of a product in this system can be considered by the example of a digital electronic model of a roller support.

Style APA, Harvard, Vancouver, ISO itp.

18

Liao, Ying Hua, Gao Jun Liu i Xiang Guo Sun. "Development of an Intelligent CAD System for Involute Cylindrical Gear Cutting Tools". Applied Mechanics and Materials 532 (luty 2014): 249–52. http://dx.doi.org/10.4028/www.scientific.net/amm.532.249.

Pełny tekst źródła

Streszczenie:

An intelligent CAD system for Involute cylindrical gear cutting tools is developed by VC++ and SQL server, and it includes four modules, such as user interface, instance query, intelligent gear tool design and database. The intelligent gear tool design is the key to the intelligent CAD system, and it is based on the forward reasoning production system, and as the Intelligent reasoning technology is used for gear tool design, a lots of expert knowledge could be made full use of. The design results by the developed intelligent CAD system are more reasonable than those by a traditional CAD system, and the efficiency and quality of the gear tool design also could be improved. The developed intelligent CAD system supports both 2D and 3D models, which can lay foundation for CAD/CAE/CAM integration of gear cutting tools.

Style APA, Harvard, Vancouver, ISO itp.

19

KUBOTA, Koji, Takashi KOTANI, Keiichi NAKAMOTO, Tohru ISHIDA i Yoshimi TAKEUCHI. "A10 Development of CAM System for Multi-tasking Machine Tools(Digital design and digital manufacturing(CAD/CAM))". Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (2009): 49–54. http://dx.doi.org/10.1299/jsmelem.2009.5.49.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

York, T. A. "Book Review: VLSI CAD Tools and Applications". International Journal of Electrical Engineering & Education 25, nr 2 (kwiecień 1988): 184–85. http://dx.doi.org/10.1177/002072098802500225.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Georgel, P. F., P. Schroeder i N. Navab. "Navigation Tools for Viewing Augmented CAD Models". IEEE Computer Graphics and Applications 29, nr 6 (listopad 2009): 65–73. http://dx.doi.org/10.1109/mcg.2009.123.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Karam, J. M., B. Courtois i H. Boutamine. "CAD tools for bridging microsystems and foundries". IEEE Design & Test of Computers 14, nr 2 (1997): 34–39. http://dx.doi.org/10.1109/54.587739.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Bär, Gert. "CAD of worms and their machining tools". Computers & Graphics 14, nr 3-4 (styczeń 1990): 405–11. http://dx.doi.org/10.1016/0097-8493(90)90061-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Miyazaki, Toshiaki, Tamio Hoshino i Makoto Endo. "Integration environment to invoke CAD tools efficiently". Electronics and Communications in Japan (Part III: Fundamental Electronic Science) 75, nr 4 (1992): 79–91. http://dx.doi.org/10.1002/ecjc.4430750408.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Ramnath, B. Vijaya, Vishal Chandrasekhar, S. Pithchai Pandian, R. Sundarrajan, A. Santhosh Shankar i S. Vickneshwaran. "Modelling and Analysis of Extrusion Die and Bolt Ejector Pin". Applied Mechanics and Materials 591 (lipiec 2014): 137–41. http://dx.doi.org/10.4028/www.scientific.net/amm.591.137.

Pełny tekst źródła

Streszczenie:

The computer aided tools and recent developments of engineering, emphasizes the importance of bringing manufacturing process into early stage for product and process design. The implied significance is that it becomes vital to reduce cost of product by extensive use of CAD tools for product formation without actually building the product. In this paper, CAD tools are used to design an extrusion die for bolt ejector pin. In this paper, the extrusion die used to produce the pin is modeled using Pro-E, a CAD tool. Then, the die is analyzed for the maximum extrusion load condition using ANSYS software, a Finite Element Analysis simulation (FEA) tool. The simulation results are compared with yield stress of material. After the die has been designed, the pin was extruded using the die. In order to evaluate the strength of extruded pin, the pin was also modeled and analyzed using ANSYS tool where it was found to be safe for its maximum ejection load condition.Keywords:Extrusiondiedesign,ejectorpin,Computeraidedmodelling(CAD),FiniteElementAnalysis(FEA).

Style APA, Harvard, Vancouver, ISO itp.

26

Ullah, AMM, i Khalifa Harib. "Tutorials for Integrating CAD/CAM in Engineering Curricula". Education Sciences 8, nr 3 (19.09.2018): 151. http://dx.doi.org/10.3390/educsci8030151.

Pełny tekst źródła

Streszczenie:

This article addresses the issue of educating engineering students with the knowledge and skills of Computer-Aided Design and Manufacturing (CAD/CAM). In particular, three carefully designed tutorials—cutting tool offsetting, tool-path generation for freeform surfaces, and the integration of advanced machine tools (e.g., hexapod-based machine tools) with solid modeling—are described. The tutorials help students gain an in-depth understanding of how the CAD/CAM-relevant hardware devices and software packages work in real-life settings. At the same time, the tutorials help students achieve the following educational outcomes: (1) an ability to apply the knowledge of mathematics, science, and engineering; (2) an ability to design a system, component, or process to meet the desired needs, (3) an ability to identify, formulate, and solve engineering problems; and (4) an ability to use the techniques, skills, and modern engineering tools that are necessary for engineering practice. The tutorials can be modified for incorporating other contemporary issues (e.g., additive manufacturing, reverse engineering, and sustainable manufacturing), which can be delved into as a natural extension of this study.

Style APA, Harvard, Vancouver, ISO itp.

27

KHURANA, RISHABH, ANURAG YADAV, T. B. S. BUXI, KISHAN SINGH RAWAT i SAMARJIT S. GHUMAN. "Non-traditional tools for predicting coronary artery disease". National Medical Journal of India 35 (16.02.2023): 261–65. http://dx.doi.org/10.25259/nmji_513_19.

Pełny tekst źródła

Streszczenie:

Background The traditional coronary calcium score (CCS) is a time-tested tool for the evaluation of coronary atherosclerosis and predictor of future cardiovascular events. Non-traditional tools can also have a value in predicting and detecting subclinical coronary artery disease (CAD). Methods We studied the role of CCS, the traditional CAD risk predictor, and the less-recognized, non-traditional risk factors, i.e. epicardial fat volume (EFV) and thoracic extracoronary calcium (ECC), to assess the degree of subclinical CAD. In this cross-sectional observational study, we included 950 Indian patients (suspected to have CAD). Coronary computed tomography angiography was performed. Estimation of CCS, EFV and thoracic ECC was done. Results A CCS of 0 was seen in 583 patients (61.4%). Of these, 492 patients had normal coronary angiogram but 91 patients had CAD. The median values of EFV were statistically significantly higher in the ‘CAD present and CCS 0’ group compared to the ‘CAD absent and CCS 0’ group (p<0.001). The presence of thoracic ECC involving at least a single site was seen in only 6 of these 91 patients. When both EFV and CCS were considered together for the detection of CAD, the sensitivity and negative predictive value (NPV) were improved compared to either of these in isolation. When ECC was taken together with CCS and EFV, no further improvement in sensitivity or NPV was observed. Conclusion The combined use of traditional CCS along with non-traditional EFV may guide us in better profiling cardiovascular risk and supplement the various traditional cardiovascular risk factors/scores.

Style APA, Harvard, Vancouver, ISO itp.

28

MORIWAKI, Toshimichi, Nobuhiro SUGIMURA i Lihui WANG. "Development of Modeling System for CAD/CAE of Machine Tools (1st Report)". Journal of the Japan Society for Precision Engineering 59, nr 2 (1993): 233–38. http://dx.doi.org/10.2493/jjspe.59.233.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

MORIWAKI, Toshimichi, Nobuhiro SUGIMURA i Lihui WANG. "Development of Modeling System for CAD/CAE of Machine Tools (2nd Report)". Journal of the Japan Society for Precision Engineering 60, nr 7 (1994): 959–63. http://dx.doi.org/10.2493/jjspe.60.959.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Popa, Camelia Lǎcrǎmioara. "Graphical Method in CAD Environment for Profiling End Mill Tool". Applied Mechanics and Materials 809-810 (listopad 2015): 787–92. http://dx.doi.org/10.4028/www.scientific.net/amm.809-810.787.

Pełny tekst źródła

Streszczenie:

The actives surfaces of screw compressors are helical surfaces, cylindrical and uniform pitch. The generation of helical surfaces can be done using tools bordered by revolution surfaces (as end mill cutter, or disk cutter). The shaping of generating tools is based on fundamentals theorem of the enveloping surfaces. This paper consists to propose a graphic solution, using specific tools of the design environment AUTOCAD, to problem concerning the shaping end mill tool which generates the helical flute of male rotor component of screw compressor. The algorithm has been developed based on a complementary theorem - "The theorem of substituting circles family".

Style APA, Harvard, Vancouver, ISO itp.

31

Kim, Sihwan, Sahil Shah, Richard Wunderlich i Jennifer Hasler. "CAD synthesis tools for floating-gate SoC FPAAs". Design Automation for Embedded Systems 25, nr 3 (22.03.2021): 161–76. http://dx.doi.org/10.1007/s10617-021-09247-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Hamri, Okba, Jean-Claude Leon, Franca Giannini i Bianca Falcidieno. "Method, Models and Tools for CAD-CAE Integration". Recent Patents on Mechanical Engineeringe 3, nr 2 (1.06.2010): 106–30. http://dx.doi.org/10.2174/2212797611003020106.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Mancarella, Luisa, Francesca Calabrese, Alessandro Antonio Zizzari i Angelo Corallo. "Integration of CAD Tools in Damage Management System". IFAC Proceedings Volumes 45, nr 27 (2012): 121–25. http://dx.doi.org/10.3182/20120919-3-it-2046.00021.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Hamri, Okba, Jean-Claude Leon, Franca Giannini i Bianca Falcidieno. "Method, Models and Tools for CAD-CAE Integration". Recent Patents on Mechanical Engineering 3, nr 2 (8.06.2010): 106–30. http://dx.doi.org/10.2174/1874477x11003020106.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Dvořák, Karel. "Management of Parametric CAD Model by External Tools". Applied Mechanics and Materials 390 (sierpień 2013): 616–20. http://dx.doi.org/10.4028/www.scientific.net/amm.390.616.

Pełny tekst źródła

Streszczenie:

One of the possibilities how to increase the efficiency of the deployment of tools for design, simulation and preparing of manufacturing technology is linking engineering applications with external tools, providing data for digital model managing. Strategically correctly designed parametric model can be managed by externally provided information. This paper provides examples of three methods using external data. Presented methods are validated during the use in industrial practice and in the preparation of technical staff at secondary schools, colleges and universities of engineering focus. The main objective of the deployment of presented methods is the acceleration of creation of virtual prototypes digital data of varying complexity while maintaining the accuracy of the corresponding geometric and functional requirements for the final product. At the same time these methods can be used to streamline transfers between different data formats of designer data and to allow interventions into the structure of the model without the use of a particular design engineering applications.

Style APA, Harvard, Vancouver, ISO itp.

36

Rico, J. C., S. Mateos, E. Cuesta i C. M. Suárez. "Design of special tools by CAD/CAM systems". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 212, nr 5 (1.05.1998): 357–71. http://dx.doi.org/10.1243/0954405981515969.

Pełny tekst źródła

Streszczenie:

This paper presents a program for the automatic design of special tools developed under a CAD/CAM (computer aided design/manufacture) system. In particular, the special tools made with standard components have been considered. Since the design of these types of tools was essentially related to the selection of their components, this paper deals with this aspect, insisting upon the selection of those components directly related to the removal of material: the toolholders or cartridges and the inserts. To select these components it is necessary to take into account not only geometrical or technological rules but also economical ones, owing to the high amount of possible components they can select. Consideration of economical aspects required the formulation of the cost equation associated with the use of these types of tools, characterized because their cutting edges coincide with different cutting velocities. Likewise, consideration of economical aspects allows the selection of the optimum cutting conditions and the cutting components to take place at the same time. Some of the geometrical and technological parameters related to the selection of cutting components are automatically identified by the system through an automatic identification of the workpiece profile.

Style APA, Harvard, Vancouver, ISO itp.

37

Stroobandt, D., P. Verplaetse i J. van Campenhout. "Generating synthetic benchmark circuits for evaluating CAD tools". IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 19, nr 9 (2000): 1011–22. http://dx.doi.org/10.1109/43.863641.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Ditzel, David R., i Alan D. Berenbaum. "Using CAD Tools in the Design of CRISP". IEEE Design & Test of Computers 4, nr 3 (czerwiec 1987): 21–31. http://dx.doi.org/10.1109/mdt.1987.295162.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Kondratyev, A., i K. Lwin. "Design of asynchronous circuits using synchronous CAD tools". IEEE Design & Test of Computers 19, nr 4 (lipiec 2002): 107–17. http://dx.doi.org/10.1109/mdt.2002.1018139.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Gielen, G. G. E., i J. E. Franca. "CAD tools for data converter design: an overview". IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing 43, nr 2 (1996): 77–89. http://dx.doi.org/10.1109/82.486454.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Courtois, B., J. M. Karam, M. Lubaszewski, V. Szekely, M. Rencz, K. Hofmann i M. Glesner. "CAD tools and foundries to boost microsystems development". Materials Science and Engineering: B 51, nr 1-3 (luty 1998): 242–53. http://dx.doi.org/10.1016/s0921-5107(97)00269-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Sajko, N., S. Kovacic i J. Balic. "Simulation based CAD/CAM model for extrusion tools". Advances in Production Engineering & Management 8, nr 1 (29.03.2013): 33–40. http://dx.doi.org/10.14743/apem2013.1.151.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Puvvada, G., i M. A. Breuer. "Teaching computer hardware design using commercial CAD tools". IEEE Transactions on Education 36, nr 1 (1993): 158–63. http://dx.doi.org/10.1109/13.204837.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Singh, D., J. M. Rabaey, M. Pedram, F. Catthoor, S. Rajgopal, N. Sehgal i T. J. Mozdzen. "Power conscious CAD tools and methodologies: a perspective". Proceedings of the IEEE 83, nr 4 (kwiecień 1995): 570–94. http://dx.doi.org/10.1109/5.371967.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Csaba, György, Markus Becherer i Wolfgang Porod. "Development of CAD tools for nanomagnetic logic devices". International Journal of Circuit Theory and Applications 41, nr 6 (10.04.2012): 634–45. http://dx.doi.org/10.1002/cta.1811.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Flynn, Michael J., i Patrick Hung. "CAD Tools for System-Level Modeling and Implementation". Software Focus 2, nr 4 (2001): 134–39. http://dx.doi.org/10.1002/swf.51.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Behrens, B. A. Prof, S. Koch, M. Pleßow, G. Wrobel, R. Scheffler i D. Bauer. "Eine neue Modellierung von Tiefziehwerkzeugen*/A new modelling of deep drawing tools - From parameter-based 3D-CAD-Model to the new graphical language for deep drawing tools". wt Werkstattstechnik online 106, nr 10 (2016): 690–94. http://dx.doi.org/10.37544/1436-4980-2016-10-16.

Pełny tekst źródła

Streszczenie:

Der Fachbeitrag konzentriert sich auf die parametergerechte 3D-CAD-Modellierung von Tiefziehwerkzeugen und deren Beschreibung in einer neuen grafischen Sprache. Die neu zu entwickelnde Modellierungssprache für die Domäne der Tiefziehwerkzeuge soll die Kommunikation zwischen Konstrukteur und CAD-Programm vereinfachen. Die Modellierung von CAD-Modellen für Tiefziehwerkzeuge wird damit flexibler und zeiteffizienter gestaltet.   This study focuses on parameter-based 3D CAD modelling of deep drawing tools as well as their description in a new graphical modelling language. The newly developed modelling language for the domain of the deep drawing tools should simplify the communication between designer and CAD program, whereby the CAD modelling of deep drawing tools should be more flexible and more time-efficient.

Style APA, Harvard, Vancouver, ISO itp.

48

Tzotzis, Anastasios, César García-Hernández, José-Luis Huertas-Talón i Panagiotis Kyratsis. "CAD-Based Automated Design of FEA-Ready Cutting Tools". Journal of Manufacturing and Materials Processing 4, nr 4 (1.11.2020): 104. http://dx.doi.org/10.3390/jmmp4040104.

Pełny tekst źródła

Streszczenie:

The resources of modern Finite Element Analysis (FEA) software provide engineers with powerful mechanisms that can be used to investigate numerous machining processes with satisfying results. Nevertheless, the success of a simulation, especially in three dimensions, relies heavily on the accuracy of the cutting tool models that are implemented in the analyses. With this in mind, the present paper presents an application developed via Computer-Aided Design (CAD) programming that enables the automated design of accurate cutting tool models that can be used in 3D turning simulations. The presented application was developed with the aid of the programming resources of a commercially available CAD system. Moreover, the parametric design methodology was employed in order to design the tools according to the appropriate standards. Concluding, a sample tool model was tested by performing a number of machining simulations based on typical cutting parameters. The yielded results were then compared to experimental values of the generated machining force components for validation. The findings of the study prove the functionality of the tool models since a high level of agreement occurred between the acquired numerical results and the experimental ones.

Style APA, Harvard, Vancouver, ISO itp.

49

Gladkevich, A. Yu. "MODIFICATION OF TOOL FOR MOVING TRACK SEGMENTS IN DELTA DESIGN CAD". Issues of radio electronics, nr 5 (8.06.2019): 130–33. http://dx.doi.org/10.21778/2218-5453-2019-5-130-133.

Pełny tekst źródła

Streszczenie:

Describes the process of improving and developing tools in computer‑aided design system Delta Design. Currently, the modern process of PCB development is quite complex and time‑consuming process. Existing CAD systems make it easier to design a printed circuit Board model by providing powerful development tools. Along with the increasing complexity of modern printed circuit boards, the requirements for development tools are also growing, making them constantly improve. Using the example of the Delta Design system, the process of improving the tool for moving track segments is described. The analysis of the advantages and disadvantages of the existing tool is made, and the decision on the need to develop a new algorithm is justified. Of the two proposed variants of such an algorithm, the optimal one was chosen in terms of the quality of the result obtained and the convenience of operation.

Style APA, Harvard, Vancouver, ISO itp.

50

Kyratsis, Panagiotis, i Athanasios Manavis. "CAD Based Drilling Simulations for Al7075". Applied Mechanics and Materials 760 (maj 2015): 87–92. http://dx.doi.org/10.4028/www.scientific.net/amm.760.87.

Pełny tekst źródła

Streszczenie:

Drilling is considered to be one of the mostly used processes for holemaking. Researchers have followed three different approaches for its simulation i.e. analytic, experimental and numerical. Nowadays the direct access of scientists to the Application Programming Interface (API) of several CAD systems led to an increased number of finite element simulations based on CAD 3D models of drilling tools. The present paper uses a CAD system and via its API a kinematic model is created. Different tool parameters and cutting conditions are introduced; a series of 3D solid models for the tool, the workpieces and the undeformed chips are created and the resulted thrust forces are predicted in both the main edges and the chisel edge. The proposed methodology is experimentally verified using Al7075 for the workpiece and HSS for the tool material. In addition, it provides the basis for a series of new applications in other manufacturing processes based on CAD created geometries.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!