Gotowa bibliografia na temat „Buffet loads”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Buffet loads”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Buffet loads"
Breitsamter, Christian, i Arne Schmid. "Airbrake-Induced Fin-Buffet Loads On Fighter Aircraft". Journal of Aircraft 45, nr 5 (wrzesień 2008): 1619–30. http://dx.doi.org/10.2514/1.33969.
Pełny tekst źródłaChen, Y., V. Wickramasinghe i D. Zimcik. "Active Control of a hybrid actuation system for aircraft vertical fin buffet load alleviation". Aeronautical Journal 110, nr 1107 (maj 2006): 315–26. http://dx.doi.org/10.1017/s000192400001318x.
Pełny tekst źródłaDang, Huixue, Junhai Zhao, Zhichun Yang i Huibo Dang. "Postponing the Onset and Alleviating the Load of Transonic Buffet by Using Steady and Periodic Tangential Slot Blowing". Applied Sciences 9, nr 19 (2.10.2019): 4132. http://dx.doi.org/10.3390/app9194132.
Pełny tekst źródłaRagab, Mohamed M. "Buffet loads prediction for a launch vehicle and comparison to flight data". Journal of Spacecraft and Rockets 29, nr 6 (listopad 1992): 849–55. http://dx.doi.org/10.2514/3.25541.
Pełny tekst źródłaLee, B. H. K., i S. Dunlavy. "Statistical prediction of maximum buffet loads on the F/A-18 vertical fin". Journal of Aircraft 29, nr 4 (lipiec 1992): 734–36. http://dx.doi.org/10.2514/3.46236.
Pełny tekst źródłaStatnikov, Vladimir, Matthias Meinke i Wolfgang Schröder. "Reduced-order analysis of buffet flow of space launchers". Journal of Fluid Mechanics 815 (14.02.2017): 1–25. http://dx.doi.org/10.1017/jfm.2017.46.
Pełny tekst źródłaPilichiewicz, Amelia N., Penny Papadopoulos, Ixchel M. Brennan, Tanya J. Little, James H. Meyer, Judith M. Wishart, Michael Horowitz i Christine Feinle-Bisset. "Load-dependent effects of duodenal lipid on antropyloroduodenal motility, plasma CCK and PYY, and energy intake in healthy men". American Journal of Physiology-Regulatory, Integrative and Comparative Physiology 293, nr 6 (grudzień 2007): R2170—R2178. http://dx.doi.org/10.1152/ajpregu.00511.2007.
Pełny tekst źródłaBall, Dale L., Philip C. Gross i Robert J. Burt. "F-35 Full Scale Durability Modeling and Test". Advanced Materials Research 891-892 (marzec 2014): 693–701. http://dx.doi.org/10.4028/www.scientific.net/amr.891-892.693.
Pełny tekst źródłaPilichiewicz, Amelia N., Reawika Chaikomin, Ixchel M. Brennan, Judith M. Wishart, Christopher K. Rayner, Karen L. Jones, Andre J. P. M. Smout, Michael Horowitz i Christine Feinle-Bisset. "Load-dependent effects of duodenal glucose on glycemia, gastrointestinal hormones, antropyloroduodenal motility, and energy intake in healthy men". American Journal of Physiology-Endocrinology and Metabolism 293, nr 3 (wrzesień 2007): E743—E753. http://dx.doi.org/10.1152/ajpendo.00159.2007.
Pełny tekst źródłaDumon, Jéromine, Yannick Bury, Nicolas Gourdain i Laurent Michel. "Numerical and experimental investigations of buffet on a diamond airfoil designed for space launcher applications". International Journal of Numerical Methods for Heat & Fluid Flow 30, nr 9 (19.06.2019): 4203–18. http://dx.doi.org/10.1108/hff-07-2018-0353.
Pełny tekst źródłaRozprawy doktorskie na temat "Buffet loads"
Carn, Cheril, i cheril Carn@dsto defence gov au. "The inverse determination of aircraft loading using artificial neural network analysis of structural response data with statistical methods". RMIT University. Aerospace, Mechanical and Manufacturing Engineering, 2007. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20080109.090600.
Pełny tekst źródłaGutierrez, Manuel S. M. Massachusetts Institute of Technology. "An energy buffer for constant power loads". Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/111914.
Pełny tekst źródłaCataloged from PDF version of thesis.
Includes bibliographical references (pages 111-113).
Constant power loads (CPLs) are a class of loads steadily increasing in use. They are present whenever a load is regulated to maintain constant output power, such as with LED drivers in high quality lighting that is impervious to input fluctuations. Because CPLs exhibit a negative incremental input impedance, they pose stability concerns in DC and AC systems. This thesis presents a power converter for a constant power LED bulb that presents a favorable input impedance to the grid. The use of an energy buffer allows the converter to draw variable power in order to resemble a resistive load, while the output consumes constant power. A switched-mode power supply consisting of a cascaded boost and buck converter accomplishes this by storing energy in the boost stage output capacitor. Experimental results demonstrate that the converter exhibits a resistive input impedance at frequencies over 0.5 Hz while maintaining constant power to the LED load.
by Manuel Gutierrez.
S.M.
Rai, Manpreet Kaur. "Understanding the role of the episodic buffer of working memory in inferential reading comprehension in L1 and L2 readers under varying conditions of cognitive load and domain knowledge". Diss., Kansas State University, 2014. http://hdl.handle.net/2097/18232.
Pełny tekst źródłaDepartment of Psychological Sciences
Richard Jackson Harris
In recent years, Baddeley (2010) has added a new component, the episodic buffer, to his Working Memory (WM) model. The episodic buffer binds information from long-term memory (LTM) to the central executive but has been researched very little, especially with respect to its use with a second language. In fact, Juffs and Harrington (2011) stated, “To date there has been no research on the possible role of the episodic buffer in L2 learning and use” (p. 140). One goal of this study was to do just that. Domain knowledge (DK) in baseball (Experiment 1) and English proficiency levels (Experiment 2) were used as proxies for difficulty level to study how inference processing under different conditions of domain knowledge and cognitive load in native (L1) and non-native (L2) English readers contribute to understanding the episodic buffer. In Experiment 1, 67 participants varying in domain knowledge about baseball read stories related to baseball with or without a concurrent cognitive load task of responding to tones while reading; they then answered comprehension questions of varying degrees of inferential difficulty. In Experiment 2, three groups varying in English reading proficiency, split into groups based on their lexical decision task scores (72 native, 40 intermediate, 40 beginner readers) read general stories with or without cognitive load and answered comprehension questions requiring varying degrees of inferential difficulty. Accuracy and Reaction Time (RT) were differentially affected by working memory (OSpan), cognitive load, and inferential complexity. In Experiment 1, greater DK explained variance in effectiveness (accuracy) and efficiency (RT) as inferential complexity increased. In Experiment 2 OSpan was needed even at lower levels of inferential complexity for beginning readers. Surprisingly, for both experiments, participants responded faster under cognitive load conditions, although not at the expense of accuracy. This suggests that the episodic buffer is important for different levels of DK and proficiency, especially as the task becomes more difficult. Theoretical and practical implications of these findings are discussed.
Kong, Jingfei. "ARCHITECTURAL SUPPORT FOR IMPROVING COMPUTER SECURITY". Doctoral diss., University of Central Florida, 2010. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/2610.
Pełny tekst źródłaPh.D.
School of Electrical Engineering and Computer Science
Engineering and Computer Science
Computer Science PhD
Yeh, Ting-Chieh, i 葉丁介. "Feasibility Analyze for Double-Load AGVS of Limited Buffers". Thesis, 1997. http://ndltd.ncl.edu.tw/handle/62284041161456451507.
Pełny tekst źródła國立雲林科技大學
工業工程與管理技術研究所
85
An Automated Guided Vehicle System (AGVS) is a common material handling device a flexible manufacturing system. The tandem AGVS is so popular because it is easy to control. When an AGVS was designed in the old day, feasibility inspection of loop included two inspection functions. One is check on handle ability of AGV, the other one is check on arrival rate of empty vehicle. Despite, the two functions are essential conditions that are check on feasibility of loop, but these build on the hypothesis that capacity of buffers is unlimited. In other words, when the buffers are big enough, the two functions have higher limit ability. Once the buffers are limited for hardware, the loop will not operation for deadlock. Therefore, the purpose of this research is building an inspection model on unlimited buffers. And understand how elements influence the performance of system. At deadlock, this research suggests that deadlock problem could be solved by double-load AGV. At the same time, this research bring up the process that moving of double-load AGV and solving deadlock. By this process, double-load AGV could detect the deadlock and eliminate deadlock by two buffers of AGV. In this research, throughput of system, utilization of AGV and average flow time are selected to be the standards to analyze the influence of system of limited buffers by elements by simulation. The results show that increasing the degree of deadlock, reducing the capacity of buffers and broadening loop system would reduce the throughput of system. The larger product, throughput of system multiply the average moving distance of parts, is, the larger utilization of AGV is. Increasing the capacity of buffers and broadening loop system would increase average flow time. At the same time, this result found that the degree of deadlock and size of loop system have low influence when speed of AGV is fast enough. But increasing speed of AGV could not reduce the influence of capacity of buffers. Besides, increasing the capacity of buffers could reduce the deadlock to occur. For this reason, the set of capacity of buffers is one of important elements when designers plan the tandem AGVS.
Jiang, Jyun-Ping, i 姜俊平. "A High Slew-Rate AMLCD Source Driver Output Buffer Applicable for Wide Load Range". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/16068056186213910450.
Pełny tekst źródła臺灣大學
電子工程學研究所
98
In recent years, the trend of display goes toward high-definition (HD) display for the active-matrix liquid crystal display (AMLCD). The LCDs haves been used in wide varieties of electronic devices, from large-size TV to small-size portable gadgets. To attain high image quality, high LCD resolution is required. As the HD LCD resolution is increased, the source driver of every column line needs to have fast transient response. Therefore, the output buffer of source driver needs to provide the high slew-rate and low dc offset voltage. A high slew-rate source output driver with frequency compensation was fabricated with TSMC 0.35-μm 2P4M CMOS technology. With 5-V supply voltage, it draws only 5-μA static current. In order to meet the high-performance display quality, the slew-rate of the output buffer should be faster than 1μs under the load of 10kΩ/300pF. However, the phase margin of the circuit needs to be larger than 30° under the load of 0kΩ/50pF. Hence, the output buffer is suitable for both small LCD panels and large size LCD panels.
Lin, I.-Fan, i 林依凡. "DDR SDRAM Buffer Management in Advanced TCA Based Load Balanced Birkhoff-von Neumann Switch". Thesis, 2008. http://ndltd.ncl.edu.tw/handle/34517681733085147727.
Pełny tekst źródłaHsu, Chia-Jung, i 許家榮. "Applying Virtual Address Compression in Branch Target Buffer and Load / Store Queue in high-performance processors". Thesis, 2007. http://ndltd.ncl.edu.tw/handle/92193125326106672956.
Pełny tekst źródła國立成功大學
電腦與通信工程研究所
95
This paper proposes a virtual address compression technique for branch target buffer (BTB) and load/store queue (LSQ) that use virtual address for matching or comparisons. Since a BTB is a large address cache, applying address compression will reduce the area cost of the BTB. A load/store queue (LSQ) typically needs a fully-associative CAM structure to search the address for matching and consequently poses scalability challenges for power consumption and area cost once the number of the in-flight instructions is raised. Using the proposed approach, the BTB design is able to reduce the area usage by 53.6%-69.3% and energy consumption by 4.2%-28.5% while the LSQ can reduce the area cost by 35%-70% and energy consumption by 39%-72%. The experiment on combining the two shows that 45%-52%total area saving of the two components are achieved while providing 2.5%-3.1% overall processor energy reduction and causing only 0.2% performance loss.
Peng, Guang-Yu, i 彭光宇. "A High Current Efficiency Rail-to-Rail Buffer for Low Drop-out Regulators With Load Regulation-Enhanced". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/09408993405943586811.
Pełny tekst źródła國立彰化師範大學
積體電路設計研究所
99
The advances in portable battery-powered consumer devices need toreduce the power consumption and extend the battery lifetime powermanagement IC is necessary. Recently, low dropout regulators (LDOs) arewidely used for power management ICs in portable applications due to the low noise, simplicity, high accuracy, better line and load regulation, small outputripple voltage, and fast transient response. However, the use of increasing size of pass transistor for the LDO in larger load current system must be needed.Unfortunately, the larger pass transistor can generate a low frequency pole inLDO’s loop, thereby degrading stability. Therefore, this thesis presents a high current efficiency rail-to-rail buffer for low dropout regulators with loadregulation enhanced to solve the problem. The proposed buffer provides apush-pull output stage for driving pass transistor and superior low output resistance push the low frequency pole far beyond the unity-gain frequency toimprove the stability of the LDO loop response. Besides, two techniques are utilized for enhancing load regulation, including miller compensation and pole-zero pair generation. The whole LDO circuit has been fabricated using a TSMC 0.35μm mixedmode (2P4M 3.3V/5V) CMOS process and occupies an area of 0.735mm2. The measurement results show that the LDO with the proposed buffer dissipates 40μA quiescent current and a maximum dropout voltage of 200mV at 250mA output load. The output voltage drop with a 1-μF off-chip output capacitor for a 250mA load step is less than 30mV.
Wang, Chun-Hao, i 王君豪. "Design and Implementation of Virtual Output Queue and Re-sequencing Buffer in Load Balanced Birkhoff-von Neumann Switch". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/98662993220833130386.
Pełny tekst źródłaKsiążki na temat "Buffet loads"
Mei yuan wei he wu xiao?: Zhan shi Zhongguo jing ji wei ji yu Zhong Mei ying dui zhi ce. Beijing: Ren min chu ban she, 2011.
Znajdź pełny tekst źródłaChakera, Aron, William G. Herrington i Christopher A. O’Callaghan. Disorders of acid–base balance. Redaktorzy Patrick Davey i David Sprigings. Oxford University Press, 2018. http://dx.doi.org/10.1093/med/9780199568741.003.0178.
Pełny tekst źródłaCoricelli, Fabrizio, i Marco Frigerio. Liquidity Squeeze on SMEs during the Great Recession in Europe. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198815815.003.0005.
Pełny tekst źródłaInside Commodore DOS: The Complete Guide to the 1541 Disk Operating System. Brady Publishing, 1986.
Znajdź pełny tekst źródłaWilmarth Jr., Arthur E. Taming the Megabanks. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780190260705.001.0001.
Pełny tekst źródłaCzęści książek na temat "Buffet loads"
Loosen, Simon, Matthias Meinke i Wolfgang Schröder. "Numerical Analysis of the Turbulent Wake for a Generic Space Launcher with a Dual-Bell Nozzle". W Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 163–77. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-53847-7_10.
Pełny tekst źródłaLevinski, Oleg. "Use of Artificial Neural Networks for Buffet Loads Prediction". W Developments in Applied Artificial Intelligence, 9–16. Berlin, Heidelberg: Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/3-540-48035-8_2.
Pełny tekst źródłaAbdulla, Parosh Aziz, Mohamed Faouzi Atig, Ahmed Bouajjani i Tuan Phong Ngo. "Replacing Store Buffers by Load Buffers in TSO". W Lecture Notes in Computer Science, 22–28. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-00359-3_2.
Pełny tekst źródłaToth, Thomas, i Christopher Kruegel. "Accurate Buffer Overflow Detection via Abstract Pay load Execution". W Lecture Notes in Computer Science, 274–91. Berlin, Heidelberg: Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/3-540-36084-0_15.
Pełny tekst źródłaZhou, Rui, Guoren Wang, Donghong Han, Pizhen Gong, Chuan Xiao i Hongru Li. "Buffer-Preposed QoS Adaptation Framework and Load Shedding Techniques over Streams". W Web Information Systems – WISE 2006, 234–46. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/11912873_25.
Pełny tekst źródłaHou, Jiaoyi, Hua Zhou, Jun Zou i Xin Fu. "Velocity Control of the Horizontal Buffer System for Heavy Load Forging Manipulator". W Intelligent Robotics and Applications, 296–304. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-16587-0_27.
Pełny tekst źródłaBhattacharya, Pronaya, Amod Kumar Tiwari, Akhilesh Ladha i Sudeep Tanwar. "A Proposed Buffer Based Load Balanced Optical Switch with AO-NACK Scheme in Modern Optical Datacenters". W Proceedings of ICETIT 2019, 95–106. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30577-2_8.
Pełny tekst źródłaJung, Walt, i Walt Kester. "Buffer Amplifiers and Driving Capacitive Loads". W Op Amp Applications Handbook, 493–504. Elsevier, 2005. http://dx.doi.org/10.1016/b978-075067844-5/50143-0.
Pełny tekst źródłaRadev, Dimitar, Izabella Lokshina i Svetla Radeva. "Modeling and Simulation of Self-Similar Traffic in Wireless IP Networks". W Networking and Telecommunications, 1631–47. IGI Global, 2010. http://dx.doi.org/10.4018/978-1-60566-986-1.ch105.
Pełny tekst źródłaBarrouillet, Pierre, i Valérie Camos. "The Time-Based Resource-Sharing Model of Working Memory". W Working Memory, 85–115. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198842286.003.0004.
Pełny tekst źródłaStreszczenia konferencji na temat "Buffet loads"
ZIMMERMAN, N., M. FERMAN, R. YURKOVICH i G. GERSTENKORN. "Prediction of tail buffet loads for design application". W 30th Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1989. http://dx.doi.org/10.2514/6.1989-1378.
Pełny tekst źródłaSchwarz, Jordan. "A Methodology for Mapping Launch Vehicle Buffet Loads". W 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
18th AIAA/ASME/AHS Adaptive Structures Conference
12th. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2010. http://dx.doi.org/10.2514/6.2010-3123.
Moses, Robert W., Carol D. Wieseman, Aaron A. Bent i Alessandro E. Pizzochero. "Evaluation of new actuators in a buffet loads environment". W SPIE's 8th Annual International Symposium on Smart Structures and Materials, redaktor Anna-Maria R. McGowan. SPIE, 2001. http://dx.doi.org/10.1117/12.429653.
Pełny tekst źródłaYang, Shuchi, Ping-Chih Chen, Xiaoquan Wang, Marc P. Mignolet, Dale M. Pitt i Jessica Loyet. "Prediction of Buffet Loads of F-15 with FUN3D Solver". W 54th AIAA Aerospace Sciences Meeting. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2016. http://dx.doi.org/10.2514/6.2016-0305.
Pełny tekst źródłaChyczewski, Thomas S. "Steady Reynolds Averaged Navier Stokes Equation-Based Buffet Loads Estimation". W 34th AIAA Applied Aerodynamics Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2016. http://dx.doi.org/10.2514/6.2016-4045.
Pełny tekst źródłaRAGAB, MOHAMED. "Contribution of buffet to space vehicle loads during atmospheric flight". W 30th Aerospace Sciences Meeting and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-716.
Pełny tekst źródłaSpiekermann, C., i A. Kabe. "Statistical combination of launch vehicle gust and buffet atmospheric flight loads". W 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1998. http://dx.doi.org/10.2514/6.1998-2010.
Pełny tekst źródłaPototzky, Anthony, i Robert Moses. "An Analysis Method to Predict Tail Buffet Loads of Fighter Aircraft". W 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2005. http://dx.doi.org/10.2514/6.2005-2291.
Pełny tekst źródłaBurnham, J. "Predicted dynamic buffet loads from limited response measurements - T-45A horizontal tail". W 36th Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1995. http://dx.doi.org/10.2514/6.1995-1338.
Pełny tekst źródłaJames, K. D., i L. A. Meyn. "Dependence of Integrated Vertical-Tail Buffet Loads For F/A-18 on Sensor Density". W Aerospace Atlantic Conference & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1994. http://dx.doi.org/10.4271/941140.
Pełny tekst źródła