Gotowa bibliografia na temat „Biopolymer”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Biopolymer”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Biopolymer"
Arrieta, Alvaro Angel, Jorge Alberto Ducuara i Enrique Miguel Combatt. "Valorization of cashew nut processing by-product: development of a cardol/starch biopolymer composite with electrochemical properties and technological potential". Eastern-European Journal of Enterprise Technologies 3, nr 6 (123) (30.06.2023): 32–41. http://dx.doi.org/10.15587/1729-4061.2023.282208.
Pełny tekst źródłaAslam Khan, Muhammad Umar, Saiful Izwan Abd Razak, Wafa Shamsan Al Arjan, Samina Nazir, T. Joseph Sahaya Anand, Hassan Mehboob i Rashid Amin. "Recent Advances in Biopolymeric Composite Materials for Tissue Engineering and Regenerative Medicines: A Review". Molecules 26, nr 3 (25.01.2021): 619. http://dx.doi.org/10.3390/molecules26030619.
Pełny tekst źródłaArrieta, Alvaro A., Yamid Nuñez de la Rosa i Manuel Palencia. "Electrochemistry Study of Bio-Based Composite Biopolymer Electrolyte—Starch/Cardol". Polymers 15, nr 9 (23.04.2023): 1994. http://dx.doi.org/10.3390/polym15091994.
Pełny tekst źródłaLemboye, Kehinde, i Abdullah Almajed. "Effect of Varying Curing Conditions on the Strength of Biopolymer Modified Sand". Polymers 15, nr 7 (28.03.2023): 1678. http://dx.doi.org/10.3390/polym15071678.
Pełny tekst źródłaFatehi, Hadi, Dominic E. L. Ong, Jimmy Yu i Ilhan Chang. "Biopolymers as Green Binders for Soil Improvement in Geotechnical Applications: A Review". Geosciences 11, nr 7 (15.07.2021): 291. http://dx.doi.org/10.3390/geosciences11070291.
Pełny tekst źródłaCigala, Rosalia Maria, Giovanna De Luca, Ileana Ielo i Francesco Crea. "Biopolymeric Nanocomposites for CO2 Capture". Polymers 16, nr 8 (11.04.2024): 1063. http://dx.doi.org/10.3390/polym16081063.
Pełny tekst źródłada Luz, Tayla Gabriela, Valber Sales i Raquel Dalla Costa da Rocha. "Evaluation of technology potential of Aloe arborescens biopolymer in galvanic effluent treatment". Water Science and Technology 2017, nr 1 (23.02.2018): 48–57. http://dx.doi.org/10.2166/wst.2018.082.
Pełny tekst źródłaIkumapayi, Omolayo M., Opeyeolu T. Laseinde, Adedayo S. Adebayo, Jesutoni R. Oluwafemi, Temitayo S. Ogedengbe, Stephen A. Akinlabi i Esther T. Akinlabi. "An Overview on recent trends in Biopolymer Base Composites for Tissue Regeneration". E3S Web of Conferences 391 (2023): 01085. http://dx.doi.org/10.1051/e3sconf/202339101085.
Pełny tekst źródłaCherednichenko, Kirill, Dmitry Kopitsyn, Svetlana Batasheva i Rawil Fakhrullin. "Probing Antimicrobial Halloysite/Biopolymer Composites with Electron Microscopy: Advantages and Limitations". Polymers 13, nr 20 (13.10.2021): 3510. http://dx.doi.org/10.3390/polym13203510.
Pełny tekst źródłaFrølund, B., K. Keiding i P. H. Nielsen. "A Comparative Study of Biopolymers from a Conventional and an Advanced Activated Sludge Treatment Plant". Water Science and Technology 29, nr 7 (1.04.1994): 137–41. http://dx.doi.org/10.2166/wst.1994.0326.
Pełny tekst źródłaRozprawy doktorskie na temat "Biopolymer"
Mousia, Zoe. "Structural and mechanical properties of biopolymer and biopolymer-sugar blends". Thesis, University of Nottingham, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341972.
Pełny tekst źródłaMoffat, Jonathan. "Assembly of biopolymer multilayers". Thesis, University of East Anglia, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.435024.
Pełny tekst źródłaSimon, Mark David. "Fast flow biopolymer synthesis". Thesis, Massachusetts Institute of Technology, 2017. http://hdl.handle.net/1721.1/117929.
Pełny tekst źródłaCataloged from PDF version of thesis.
Includes bibliographical references (pages 125-129).
This thesis describes the development and application of fast flow solid phase synthesis for the preparation of peptides and phosphorodiamidate morpholino oligomers (PMOs), as well as the application of fast, reliable peptide synthesis to study non-natural protein folding and function. In the first chapter, solid supported peptide synthesis was accelerated using flow by continuously delivering preheated solvents and reagents to the solid support at high flow rate, thereby maintaining maximal concentrations, quickly exchanging reagents, and eliminating the need to heat reagents after they were added to the vessel. In the second chapter, these chemical principles were expanded upon and mechanical challenges particular to accelerated solid phase synthesis were overcome to build a fully automated fast flow peptide synthesizer than incorporates amino acids in as little as 40 seconds each. First, mechanical systems were developed to rapidly switch between the many reagents needed for peptide synthesis while maintaining the proper stoichiometry of all reaction components at all times. Second, conditions under which reagents did not appreciably degrade during storage or synthesis were found. Finally, synthetic outcomes were substantially improved by increasing temperature without degrading the protected, resin bound peptide. The third chapter describes the expansion of fast flow synthesis to PMOs. A 10-fold acceleration of PMO synthesis was realized using mechanical systems adapted from chapter 1, increasing the reaction temperature to 90°C, and introducing a Lewis acid catalyst. The acidity of the deprotection reagent was reduced to prevent cleavage of the backbone during 3' detritylation. In the final chapter, a "D-scan" of two small proteins, the disulfide-rich Ecballium elaterium trypsin inhibitor II (EETI-II) and a minimized Z domain of protein A (Z33), is reported. For each protein, the chirality of one amino acid at a time was inverted to generate a series of diastereomers, and study the critical stereocenters of EETI-I and Z33. Twelve out of 30 EETI-II analogs folded and were high-affinity trypsin inhibitors, but most active analogs were less stable to reduction than EETI-II. Similarly, twelve Z33 analogs retained high binding affinity to IgG, but most were substantially less stable than WT-Z33.
by Mark David Simon.
Ph. D.
Kvien, Ingvild. "Characterization of Biopolymer Based Nanocomposites". Doctoral thesis, Norwegian University of Science and Technology, Department of Engineering Design and Materials, 2007. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-1479.
Pełny tekst źródłaThe field of nanocomposites is gaining considerable attention due to its potential for providing new materials with extraordinary physical properties compared to traditional composite materials. In this thesis cellulose nanowhiskers (CNW) were separated from microcrystalline cellulose (MCC) and dispersed in different biopolymer matrices to obtain polymer nanocomposites based on renewable resources. Moving from microstructure to nanostructure creates new challenges for structure characterization of materials. The overall aim of this work was to characterize the structure of CNW and their nanocomposites with different matrices. The sample preparation and microscopic examination of the bionanocomposites showed to be challenging because they are non-conductive, soft and water sensitive materials and consist of low atomic number elements. In the studies field emission scanning electron microscope was found to be a convenient and important first step in the analysis of the nanocomposite structure. More detailed information about the distribution of CNW was however obtained using transmission electron microscope (TEM) and atomic force microscope. X-ray diffraction analysis showed that the MCC consisted of both amorphous and crystalline regions. The sulfuric acid isolation treatment removed the amorphous regions and separated the cellulose nanowhiskers. From TEM analysis the size of the whiskers was measured to be 210 ± 75 nm in length and 5 ± 2 nm in width. It was also possible to separate the CNW from MCC using dimethyl acetamide containing a small amount of LiCl. It was however difficult to remove the organic solvent after treatment. CNW were well distributed in a hydrophobic matrix by the aid of a surfactant. Untreated CNW or untreated layered silicates in a thermoplastic starch matrix resulted in well dispersed nanocomposites. It was further found that it was possible to obtain oriented CNW in a matrix after exposure to a magnetic field. The dynamic mechanical thermal analysis of the different nanocomposites in this thesis showed that well dispersed cellulose whiskers have a large potential for improving the thermal mechanical properties of biopolymers.
Paper VII: The original publication is available at www.springerlink.com
Puaud, Max. "Mechanical properties of biopolymer films". Thesis, University of Nottingham, 2000. http://eprints.nottingham.ac.uk/11624/.
Pełny tekst źródłaMuguda, Viswanath Sravan. "Biopolymer Stabilised Earthen Construction Materials". Thesis, Pau, 2019. http://www.theses.fr/2019PAUU3027.
Pełny tekst źródłaEarthen structures (i.e. structural units manufactured from soil) are often regarded as sustainable forms of construction due to their characteristically low carbon footprint. Unstabilised earthen construction materials have low embodied energy, excellent hygroscopic properties and recycling potential. However, in this form, the material is susceptible to deterioration against water ingress and most modern earthen construction materials rely on cement to improve their durability properties. Using cement leads to compromises in hygroscopicproperties and recyclability potential. In this situation, it is imperative to look for alternatives to cement, which can address these issues without compromising on the desired engineering properties of these materials. This thesis explores the use of biopolymers, namely guar and xanthan gum, as stabilisers for earthen construction materials. As an initial step, an experimental campaign was undertaken to understand biopolymer stabilisation and optimise their use to stabilise earthen construction materials. The results from this campaign reveal that biopolymer stabilised soils derive their strength through a combination of soil suction and hydrogel formation. The intrinsic chemical properties of the biopolymer affect the nature of hydrogel formation and in turn strength. In a subsequent campaign of experimental work, hydraulic and mechanical properties of these biopolymer stabilised soils were determined. The hydraulic properties of the biopolymer stabilised soils indicate that for the range of water contents, the suction values of biopolymer stabilised soils are higher than unamended soils. The soil water retention curves suggest that both biopolymers have increased the air entry value of the soil while affecting the void size distribution. Shear strength parameters of biopolymer stabilised soils were obtained through constant water triaxial tests, and it was noted that both biopolymers have a significant and yet different effect on soil cohesion and internal friction angle. With time, guar gum stabilised soils derive strength through the frictional component of the soil strength, while xanthan gum stabilised soil strength has a noticeable contribution from soil cohesion. Macrostructural analysis in the form of X-RCT scans indicate that both biopolymers form soil agglomerations and increase overall porosity. The void size distribution curves obtained from XRCT scanning complement the findings of the suction tests. As a final study, the performance of biopolymer stabilised earthen construction materials was assessed as a building material. Durability performance of these materials against water ingress was evaluated, and it was noted both biopolymers provide satisfactory stabilisation to improve the erosional resistance of the material. In conclusion, unlike cement, biopolymer stabilised earthen materials do not compromise on hygroscopic properties and have better mechanical performance than unamended earthen construction materials. Finally, recyclability tests suggest that apart from improving the strength, durability and hygroscopic properties of the material, biopolymer stabilised earthen construction materials have a better potential for recycling without any environmental concerns
Kubalová, Barbora. "Fázově separované systémy biopolymer-lipid". Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2016. http://www.nusl.cz/ntk/nusl-240581.
Pełny tekst źródłaEdmonds, Christopher Michael. "Computational investigations of biopolymer translocation through nanopore devices". Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/50260.
Pełny tekst źródłaBondeson, Daniel. "Biopolymer-based Nanocomposites : Processing and Properties". Doctoral thesis, Norwegian University of Science and Technology, Department of Engineering Design and Materials, 2007. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-1923.
Pełny tekst źródłaThe aim of this study was to produce biopolymer-based nanocomposites using extrusion as an industrially adaptable manufacturing process, and to study how this production process influenced the structure and properties of the nanocomposites produced. Cellulose nanowhiskers (CNWs) were prepared and used as nanoreinforcement in two different biopolymers, polylactic acid (PLA) and cellulose acetate butyrate (CAB). The CNWs were added to PLA and CAB in order to improve the thermal and mechanical properties of these polymers. Two different preparation methods of CNWs were used; isolation by sulfuric acid hydrolysis and isolation by hydrochloric acid hydrolysis. Different feeding procedures were used and evaluated during compounding. The CNW suspension was either freeze-dried and dry-mixed with the polymer prior the extrusion, or fed as a suspension directly into the extruder during compounding. However, the CNW suspension required modification in order to prevent re-aggregation of the whiskers as the dispersing medium was removed and to uniformly disperse the whiskers in the polymer matrix. In order to improve the dispersion of the CNWs in the matrix, a surfactant and a water soluble polymer were used for PLA, and a plasticizer was used for CAB. No major improvements in mechanical or thermal properties were seen for the PLA/CNW nanocomposites, either because of degradation of the matrix or poor dispersion of the whiskers. The material system of CAB/CNW was more successful and showed great improvements in mechanical and thermal properties. This study demonstrated that it is possible to produce nanocomposites by pumping a suspension of CNWs into the extruder during compounding, but compatibility between the CNWs and the matrix is required.
Morris, Eliza. "Mechanics and Dynamics of Biopolymer Networks". Thesis, Harvard University, 2014. http://dissertations.umi.com/gsas.harvard:11647.
Pełny tekst źródłaEngineering and Applied Sciences
Książki na temat "Biopolymer"
Dufresne, Alain, Sabu Thomas i Laly A. Pothen, red. Biopolymer Nanocomposites. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118609958.
Pełny tekst źródłaRenard, Denis, Guy D. Valle i Y. Popineau, red. Plant Biopolymer Science. Cambridge: Royal Society of Chemistry, 2007. http://dx.doi.org/10.1039/9781847551672.
Pełny tekst źródłaS, Németh Tamás, red. Biopolymer research trends. New York: Nova Science Publishers, 2007.
Znajdź pełny tekst źródłaC, Sánchez Pablo, red. Progress in biopolymer research. New York: Nova Science Publishers, 2007.
Znajdź pełny tekst źródłaSharma, Bhasha, i Purnima Jain, red. Graphene Based Biopolymer Nanocomposites. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-15-9180-8.
Pełny tekst źródłaAzzaroni, Omar, i Igal Szleifer. Polymer and Biopolymer Brushes. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119455042.
Pełny tekst źródłaIntroduction to biopolymer physics. Hackensack, N.J: World Scientific, 2007.
Znajdź pełny tekst źródłaHollander, Anthony P., i Paul V. Hatton. Biopolymer Methods in Tissue Engineering. New Jersey: Humana Press, 2003. http://dx.doi.org/10.1385/159259428x.
Pełny tekst źródłaBiopolymer engineering in food processing. Boca Raton, FL: Taylor & Francis, 2012.
Znajdź pełny tekst źródłaSharma, Sanjay K., i Ackmez Mudhoo, red. Handbook of Applied Biopolymer Technology. Cambridge: Royal Society of Chemistry, 2011. http://dx.doi.org/10.1039/9781849733458.
Pełny tekst źródłaCzęści książek na temat "Biopolymer"
Abdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "Biopolymer Composites". W Biopolymers and Biopolymer Blends, 1–104. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-1.
Pełny tekst źródłaAbdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "Applications of Biopolymer Blends and Biopolymer-Based Nanocomposites". W Biopolymers and Biopolymer Blends, 193–253. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-5.
Pełny tekst źródłaAbdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "Characteristics and Performance of Emerging Biopolymers from Sugar Palm Starch for Packaging". W Biopolymers and Biopolymer Blends, 308–30. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-9.
Pełny tekst źródłaAbdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "Crosslinking Networks of Functional Biopolymer Hydrogels". W Biopolymers and Biopolymer Blends, 357–65. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-11.
Pełny tekst źródłaAbdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "Biodegradation and Compostable Biopolymers". W Biopolymers and Biopolymer Blends, 105–24. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-2.
Pełny tekst źródłaAbdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "State-of-the-Art Natural Biopolymers for Bionanocomposites". W Biopolymers and Biopolymer Blends, 125–60. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-3.
Pełny tekst źródłaAbdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "Biopolymers in 3D Printing Technology". W Biopolymers and Biopolymer Blends, 161–92. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-4.
Pełny tekst źródłaAbdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "Biopolymers for Drug Delivery Applications". W Biopolymers and Biopolymer Blends, 331–56. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-10.
Pełny tekst źródłaAbdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "Seaweed-Based Biopolymers for Sustainable Applications". W Biopolymers and Biopolymer Blends, 284–307. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-8.
Pełny tekst źródłaAbdul Khalil, H. P. S., M. R. Nurul Fazita i N. Mohd Nurazzi. "Starch-Based Films with Essential Oils for Antimicrobial Food Packaging". W Biopolymers and Biopolymer Blends, 254–72. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003416043-6.
Pełny tekst źródłaStreszczenia konferencji na temat "Biopolymer"
FRITH, W. J., i I. T. NORTON. "MECHANICAL PROPERTIES OF MODEL COMPOSITES PRODUCED FROM FOOD BIOPOLYMERS: INFLUENCE OF BIOPOLYMER-BIOPOLYMER INTERFACIAL PROPERTIES". W Proceedings of the Fifth Royal Society–Unilever Indo-UK Forum in Materials Science and Engineering. A CO-PUBLICATION OF IMPERIAL COLLEGE PRESS AND THE ROYAL SOCIETY, 2000. http://dx.doi.org/10.1142/9781848160163_0019.
Pełny tekst źródłaWang, Ning, Xingxiang Zhang, Zhijun Qiao i Haihui Liu. "Solid biopolymer electrolytes came from renewable biopolymer". W Second International Conference on Smart Materials and Nanotechnology in Engineering, redaktorzy Jinsong Leng, Anand K. Asundi i Wolfgang Ecke. SPIE, 2009. http://dx.doi.org/10.1117/12.835504.
Pełny tekst źródłaHung, Yu-Chueh. "DNA Biopolymer Photonics". W 2018 International Conference on Optical MEMS and Nanophotonics (OMN). IEEE, 2018. http://dx.doi.org/10.1109/omn.2018.8454461.
Pełny tekst źródłaHoward, S., i Montogomery, TX. "Long-term Coreflood Testing with Biopolymers—A Laboratory Investigation Showing How Return Permeability Improves From 0 to 100 Percent by Getting a Critical Parameter Right". W SPE International Conference and Exhibition on Formation Damage Control. SPE, 2024. http://dx.doi.org/10.2118/217909-ms.
Pełny tekst źródłaZhou, Bin, Sung Jin Kim, Carrie M. Bartsch, Emily M. Heckman, Fahima Ouchen i Alexander N. Cartwright. "Optical properties of DNA-CTMA biopolymers and applications in metal-biopolymer-metal photodetectors". W SPIE NanoScience + Engineering, redaktorzy Norihisa Kobayashi, Fahima Ouchen i Ileana Rau. SPIE, 2011. http://dx.doi.org/10.1117/12.892857.
Pełny tekst źródłaAnchidin-Norocel, Liliana, Gheorghe Gutt i Sonia Amariei. "VOLTAMMETRIC BEHAVIOR AND DETERMINATION OF NICKEL IONS USING BIOPOLYMERS FOR RECEPTOR IMMOBILIZATION". W 23rd SGEM International Multidisciplinary Scientific GeoConference 2023. STEF92 Technology, 2023. http://dx.doi.org/10.5593/sgem2023v/6.2/s25.58.
Pełny tekst źródłaHouston, Kirsty Ann, Niall Fleming, Julya Jennifer Bonkat, Havard Kaarigstad, Jonathan Barclay, Russell Watson i Patrick Viste. "Innovative Water Based Mud Design to Improve Formation Damage Results on Mariner Field". W SPE International Conference and Exhibition on Formation Damage Control. SPE, 2022. http://dx.doi.org/10.2118/208844-ms.
Pełny tekst źródłaKadak, Ali Eslem. "Chitosan; A Novel Adsorbent for CO2 Capture". W 3rd International Congress on Engineering and Life Science. Prensip Publishing, 2023. http://dx.doi.org/10.61326/icelis.2023.66.
Pełny tekst źródłaBedford, Nick, Daewoo Han i Andrew J. Steckl. "Electrospun Biopolymer-Based Micro/Nanofibers". W 2008 17th Biennial University/Government/Industry Micro/Nano Symposium. IEEE, 2008. http://dx.doi.org/10.1109/ugim.2008.44.
Pełny tekst źródłaA. Starukhina, L., V. V. Deriabin i V. J. Titov. "New biopolymer for EOR Moscow". W IOR 1991 - 6th European Symposium on Improved Oil Recovery. European Association of Geoscientists & Engineers, 1991. http://dx.doi.org/10.3997/2214-4609.201411265.
Pełny tekst źródłaRaporty organizacyjne na temat "Biopolymer"
Possidónio, Catarina, Ana Rita Farias, Samuel Domingos, Bernardo Cruz, Sílvia Luís i Ana Loureiro. Exploring supply-side barriers for commercialization of new biopolymer production technologies: A systematic review. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, maj 2023. http://dx.doi.org/10.37766/inplasy2023.5.0076.
Pełny tekst źródłaAbdellatef, Mohammed, Clifford Ho, Peter Kobos, Budi Gunawan, Jessica Rimsza, Hongkyu Yoon i Mahmoud Taha. Biopolymer Concrete. Office of Scientific and Technical Information (OSTI), wrzesień 2022. http://dx.doi.org/10.2172/1888878.
Pełny tekst źródłaErbeldinger, Markus, i Keith LeJeune. Nerve Agent Sensing Biopolymer Wipe. Fort Belvoir, VA: Defense Technical Information Center, kwiecień 2003. http://dx.doi.org/10.21236/ada413535.
Pełny tekst źródłaFox, Douglas. POSS-Modified Cellulose for Improved Biopolymer Performance. Fort Belvoir, VA: Defense Technical Information Center, wrzesień 2011. http://dx.doi.org/10.21236/ada566210.
Pełny tekst źródłaThomas, Jayan. Printed Biopolymer-Based Electro-Optic Device Components. Fort Belvoir, VA: Defense Technical Information Center, lipiec 2013. http://dx.doi.org/10.21236/ada583167.
Pełny tekst źródłaSnadra L. Fox, X. Xie, K. D. Schaller, E. P. Robertson i G. A. Bala. Permeability Modification Using a Reactive Alkaline-Soluble Biopolymer. Office of Scientific and Technical Information (OSTI), październik 2003. http://dx.doi.org/10.2172/910609.
Pełny tekst źródłaSinskey, Anthony J., Oliver P. Peoples i Chokyun Rha. Strategies for Biopolymer Engineering of PHB-Like Materials. Fort Belvoir, VA: Defense Technical Information Center, sierpień 1991. http://dx.doi.org/10.21236/ada239690.
Pełny tekst źródłaKarnesky, Richard A., Raymond William Friddle, Josh A. Whaley i Geoffrey Smith. Permeation of "Hydromer" Film: An Elastomeric Hydrogen-Capturing Biopolymer. Office of Scientific and Technical Information (OSTI), grudzień 2015. http://dx.doi.org/10.2172/1234933.
Pełny tekst źródłaHolland, Gregory P., i Jeffery L. Yarger. Spider Silk: From Protein-Rich Gland Fluids to Diverse Biopolymer Fibers. Fort Belvoir, VA: Defense Technical Information Center, styczeń 2016. http://dx.doi.org/10.21236/ad1001844.
Pełny tekst źródłaKnotek-Smith, Heather, Carina Jung, Danny Harrelson, Aimee Poda i Anthony Bednar. Biopolymer Production in the Aquifer of a Groundwater Pump-and-Treat System. Engineer Research and Development Center (U.S.), wrzesień 2020. http://dx.doi.org/10.21079/11681/38221.
Pełny tekst źródła