Artykuły w czasopismach na temat „Bio-Sourced composite material”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Bio-Sourced composite material”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.
Moussa, Tala, Chadi Maalouf, Christophe Bliard, Boussad Abbes, Céline Badouard, Mohammed Lachi, Silvana do Socorro Veloso Sodré i in. "Spent Coffee Grounds as Building Material for Non-Load-Bearing Structures". Materials 15, nr 5 (24.02.2022): 1689. http://dx.doi.org/10.3390/ma15051689.
Pełny tekst źródłaZhang, Dan. "Fire-Safe Biobased Composites: Enhancing the Applicability of Biocomposites with Improved Fire Performance". Fire 6, nr 6 (8.06.2023): 229. http://dx.doi.org/10.3390/fire6060229.
Pełny tekst źródłaSamouh, Z., A. Abed, C. Cochrane, A. R. Labanieh, F. Boussu, D. Soulat, R. El-Mozznine i O. Cherkaoui. "Investigation on bio-sourced textile reinforcement for composite material based on sisal Moroccan yarns". IOP Conference Series: Materials Science and Engineering 1266, nr 1 (1.01.2023): 012013. http://dx.doi.org/10.1088/1757-899x/1266/1/012013.
Pełny tekst źródłaARHAB, FATMA, BOUALEM DJEBRI, HEMZA SAIDI, BASSAM GAMAL NASSER MUTHANNA i ABDELKADER MEBROUKI. "ELABORATION OF THERMAL INSULATION COMPOSITES BASED ON PAPER WASTE AND BIO-SOURCED MATERIAL". Cellulose Chemistry and Technology 58, nr 1-2 (15.03.2024): 153–61. http://dx.doi.org/10.35812/cellulosechemtechnol.2024.58.15.
Pełny tekst źródłaSlaimia, Marouen, Naima Belayachi i Dashnor Hoxha. "In Situ Performance Assessment of a Bio-Sourced Insulation Material from an Inverse Analysis of Measurements on a Demonstrator Building". Advanced Engineering Forum 21 (marzec 2017): 460–67. http://dx.doi.org/10.4028/www.scientific.net/aef.21.460.
Pełny tekst źródłaToifane, Hachmi, Pierre Tittelein, Yassine Cherif, Laurent Zalewski i Hervé Leuck. "Thermophysical Characterization of a Thermoregulating Interior Coating Containing a Bio-Sourced Phase Change Material". Applied Sciences 12, nr 8 (10.04.2022): 3827. http://dx.doi.org/10.3390/app12083827.
Pełny tekst źródłaVerstraete, Sofie, Bart Buffel, Dharmjeet Madhav, Stijn Debruyne i Frederik Desplentere. "Short Flax Fibres and Shives as Reinforcements in Bio Composites: A Numerical and Experimental Study on the Mechanical Properties". Polymers 15, nr 10 (9.05.2023): 2239. http://dx.doi.org/10.3390/polym15102239.
Pełny tekst źródłaDavies, Peter. "Environmental degradation of composites for marine structures: new materials and new applications". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 374, nr 2071 (13.07.2016): 20150272. http://dx.doi.org/10.1098/rsta.2015.0272.
Pełny tekst źródłaKwaśniewska, Anita, Michał Świetlicki, Beata Kowalska i Grzegorz Gładyszewski. "Polysaccharide Composite Films Utilising Wood Waste". Materials 16, nr 17 (2.09.2023): 6031. http://dx.doi.org/10.3390/ma16176031.
Pełny tekst źródłaGuessasma, Sofiane, i Sofiane Belhabib. "Effect of the Printing Angle on the Microstructure and Tensile Performance of Iron-Reinforced Polylactic Acid Composite Manufactured Using Fused Filament Fabrication". Journal of Manufacturing and Materials Processing 8, nr 2 (27.03.2024): 65. http://dx.doi.org/10.3390/jmmp8020065.
Pełny tekst źródłaVidakis, Nectarios, Markos Petousis, Nikolaos Mountakis, Vassilis Papadakis, Chrysa Charou, Vasilis Rousos i Pavlos Bastas. "Glass Fillers in Three Different Forms Used as Reinforcement Agents of Polylactic Acid in Material Extrusion Additive Manufacturing". Applied Sciences 13, nr 11 (25.05.2023): 6471. http://dx.doi.org/10.3390/app13116471.
Pełny tekst źródłaMenčík, Přemysl, Radek Přikryl, Štěpán Krobot, Veronika Melčová, Soňa Kontárová, Roderik Plavec, Jan Bočkaj, Vojtech Horváth i Pavol Alexy. "Evaluation of the Properties of PHB Composite Filled with Kaolin Particles for 3D Printing Applications Using the Design of Experiment". International Journal of Molecular Sciences 23, nr 22 (19.11.2022): 14409. http://dx.doi.org/10.3390/ijms232214409.
Pełny tekst źródłaCampbell, Andrew I., Sandra Sexton, Carl J. Schaschke, Harry Kinsman, Brian McLaughlin i Martin Boyle. "Prosthetic limb sockets from plant-based composite materials". Prosthetics and Orthotics International 36, nr 2 (3.02.2012): 181–89. http://dx.doi.org/10.1177/0309364611434568.
Pełny tekst źródłaMessis, Meriem, Nasr Eddine Bouhamou i Abdelatif Benaisa. "Durability of Raw Earth Blocks Reinforced with Wheat Straw Fibers". Advanced Materials Research 1178 (25.07.2023): 131–48. http://dx.doi.org/10.4028/p-b0meu9.
Pełny tekst źródłaLe Barbenchon, Louise, Jérémie Girardot, Jean-Benoît Kopp i Philippe Viot. "Strain Rate Effect on the Compressive Behaviour of Reinforced Cork Agglomerates". EPJ Web of Conferences 183 (2018): 03018. http://dx.doi.org/10.1051/epjconf/201818303018.
Pełny tekst źródłaRozaini, Muhamad Tahriri, Denys I. Grekov, Mohamad Azmi Bustam i Pascaline Pré. "Shaping of HKUST-1 via Extrusion for the Separation of CO2/CH4 in Biogas". Separations 10, nr 9 (6.09.2023): 487. http://dx.doi.org/10.3390/separations10090487.
Pełny tekst źródłaBen Hadj Tahar, Dhouha, Zakaria Triki, Mohamed Guendouz, Hichem Tahraoui, Meriem Zamouche, Mohammed Kebir, Jie Zhang i Abdeltif Amrane. "Characterization and Thermal Evaluation of a Novel Bio-BasedNatural Insulation Material from Posidonia oceanica Waste: A Sustainable Solution for Building Insulation". ChemEngineering 8, nr 1 (2.02.2024): 18. http://dx.doi.org/10.3390/chemengineering8010018.
Pełny tekst źródłaLiu, Dagang, Ying Zhang, Xun Sun i Peter R. Chang. "Recent advances in bio-sourced polymeric carbohydrate/nanotube composites". Journal of Applied Polymer Science 131, nr 12 (21.01.2014): n/a. http://dx.doi.org/10.1002/app.40359.
Pełny tekst źródłaOuagne, Pierre. "3rd Edition of the Young Researchers' Days in Bio-sourced Composites". Revue des composites et des matériaux avancés 29, nr 5 (1.11.2019): 275–76. http://dx.doi.org/10.18280/rcma.290500.
Pełny tekst źródłaCalvino, Céline, Nicholas Macke, Ryo Kato i Stuart J. Rowan. "Development, processing and applications of bio-sourced cellulose nanocrystal composites". Progress in Polymer Science 103 (kwiecień 2020): 101221. http://dx.doi.org/10.1016/j.progpolymsci.2020.101221.
Pełny tekst źródłaArinkoola, A. O,, K. K. Salam, T. O. Salawudeen, G. O. Abidemi, J. O. Hamed, M. O. Jimoh, O. A. Olufayo i Y. M. Aladeitan. "Improvement of Filtration Properties of Treated Nigerian Bentonitic Clay Using Locally Sourced Bio-Materials". LAUTECH Journal of Civil and Environmental Studies 5, nr 1 (27.09.2020): 114–30. http://dx.doi.org/10.36108/laujoces/0202/50(0121).
Pełny tekst źródłaVillamil Watson, Daniel A., i David A. Schiraldi. "Biomolecules as Flame Retardant Additives for Polymers: A Review". Polymers 12, nr 4 (7.04.2020): 849. http://dx.doi.org/10.3390/polym12040849.
Pełny tekst źródłaSallem-Idrissi, N., P. Van Velthem i M. Sclavons. "Fully Bio-Sourced Nylon 11/Raw Lignin Composites: Thermal and Mechanical Performances". Journal of Polymers and the Environment 26, nr 12 (25.09.2018): 4405–14. http://dx.doi.org/10.1007/s10924-018-1311-7.
Pełny tekst źródłaAguado, Roberto J., Gabriela A. Bastida, Francisco X. Espinach, Joan Llorens, Quim Tarrés, Marc Delgado-Aguilar i Pere Mutjé. "Comparative Study on the Stiffness of Poly(lactic acid) Reinforced with Untreated and Bleached Hemp Fibers". Polymers 15, nr 13 (6.07.2023): 2960. http://dx.doi.org/10.3390/polym15132960.
Pełny tekst źródłaZdiri, Khmais, Aurélie Cayla, Adel Elamri, Annaëlle Erard i Fabien Salaun. "Alginate-Based Bio-Composites and Their Potential Applications". Journal of Functional Biomaterials 13, nr 3 (10.08.2022): 117. http://dx.doi.org/10.3390/jfb13030117.
Pełny tekst źródłaLebaupin, Yann, Thuy-Quynh T. Hoang, Michaël Chauvin i Fabienne Touchard. "Influence of the stacking sequence on the low-energy impact resistance of flax/PA11 composite". Journal of Composite Materials 53, nr 22 (16.03.2019): 3187–98. http://dx.doi.org/10.1177/0021998319837339.
Pełny tekst źródłaNamphonsane, Atitiya, Taweechai Amornsakchai, Chin Hua Chia, Kheng Lim Goh, Sombat Thanawan, Rungtiwa Wongsagonsup i Siwaporn Meejoo Smith. "Development of Biodegradable Rigid Foams from Pineapple Field Waste". Polymers 15, nr 13 (29.06.2023): 2895. http://dx.doi.org/10.3390/polym15132895.
Pełny tekst źródłaPierau, Lucie, Christine Elian, Jun Akimoto, Yoshihiro Ito, Sylvain Caillol i Davy-Louis Versace. "Bio-sourced monomers and cationic photopolymerization–The green combination towards eco-friendly and non-toxic materials". Progress in Polymer Science 127 (kwiecień 2022): 101517. http://dx.doi.org/10.1016/j.progpolymsci.2022.101517.
Pełny tekst źródłaKhandelwal, Vinay, Sushanta K. Sahoo, Ashok Kumar, Sushanta K. Sethi i Gaurav Manik. "Bio-sourced electrically conductive epoxidized linseed oil based composites filled with polyaniline and carbon nanotubes". Composites Part B: Engineering 172 (wrzesień 2019): 76–82. http://dx.doi.org/10.1016/j.compositesb.2019.05.050.
Pełny tekst źródłaSamouh, Zineb, Omar Cherkaoui, Damien Soulat, Ahmad Rashed Labanieh, François Boussu i Reddad El moznine. "Identification of the Physical and Mechanical Properties of Moroccan Sisal Yarns Used as Reinforcements for Composite Materials". Fibers 9, nr 2 (5.02.2021): 13. http://dx.doi.org/10.3390/fib9020013.
Pełny tekst źródłaChaves Garcia, Maria Camila, Juan Dayal Castro Bermudez i Alberto David Pertuz Comas. "Uniaxial fatigue study of a natural-based bio-composite material reinforced with fique natural fibers". Frattura ed Integrità Strutturale 18, nr 68 (15.02.2024): 94–108. http://dx.doi.org/10.3221/igf-esis.68.06.
Pełny tekst źródłaSalleh, Z., i M. A. A. Zullastri. "COMPARISON OF FLEXURAL PROPERTIES OF PINEWOOD WITH FEA SIMULATION FOR MARINE APPLICATION". Jurnal Teknologi 86, nr 2 (16.01.2024): 209–15. http://dx.doi.org/10.11113/jurnalteknologi.v86.20667.
Pełny tekst źródłaGhorbel, Elhem, Mariem Limaiem i George Wardeh. "Mechanical Performance of Bio-Based FRP-Confined Recycled Aggregate Concrete under Uniaxial Compression". Materials 14, nr 7 (3.04.2021): 1778. http://dx.doi.org/10.3390/ma14071778.
Pełny tekst źródłaSayouba, Sandwidi, Haro Kayaba, Dabilgou Téré, Sinon Souleymane, Sanogo Oumar, Koulidiati Jean i Bere Antoine. "Search for Qualified Soil for the Production of Low-Energy Biobased Composite Materials". Asian Journal of Physical and Chemical Sciences 11, nr 3 (24.08.2023): 64–73. http://dx.doi.org/10.9734/ajopacs/2023/v11i3207.
Pełny tekst źródłaDavid, Grégoire, Nathalie Gontard i Hélène Angellier-Coussy. "Mitigating the Impact of Cellulose Particles on the Performance of Biopolyester-Based Composites by Gas-Phase Esterification". Polymers 11, nr 2 (24.01.2019): 200. http://dx.doi.org/10.3390/polym11020200.
Pełny tekst źródłaAguado, Roberto J., Francesc X. Espinach, Fernando Julián, Quim Tarrés, Marc Delgado-Aguilar i Pere Mutjé. "Tensile Strength of Poly(Lactic Acid)/Bleached Short Hemp Fiber Fully Green Composites as Replacement for Polypropylene/Glass Fiber". Polymers 15, nr 1 (28.12.2022): 146. http://dx.doi.org/10.3390/polym15010146.
Pełny tekst źródłaKremensas, Arūnas, Agnė Kairytė, Saulius Vaitkus, Sigitas Vėjelis i Giedrius Balčiūnas. "Mechanical Performance of Biodegradable Thermoplastic Polymer-Based Biocomposite Boards from Hemp Shivs and Corn Starch for the Building Industry". Materials 12, nr 6 (13.03.2019): 845. http://dx.doi.org/10.3390/ma12060845.
Pełny tekst źródłaRobledo-Ortíz, Jorge Ramón, Martín Esteban González-López, Alan Salvador Martín del Campo, Laura Peponi, Rubén González-Nuñez, Denis Rodrigue i Aida Alejandra Pérez-Fonseca. "Fiber-matrix interface improvement via glycidyl methacrylate compatibilization for rotomolded poly(lactic acid)/agave fiber biocomposites". Journal of Composite Materials 55, nr 2 (30.07.2020): 201–12. http://dx.doi.org/10.1177/0021998320946821.
Pełny tekst źródłaUngureanu, Simona, Marc Birot, Gérard Vignoles, Christophe Lorette, Gilles Sigaud, Hervé Deleuze i Rénal Backov. "Integrative Chemistry toward Biosourced SiC Macrocellular Foams Bearing Unprecented Heat Transport Properties". MRS Proceedings 1621 (2014): 209–14. http://dx.doi.org/10.1557/opl.2014.2.
Pełny tekst źródłaLopera-Valle, Adrián, Joseph V. Caputo, Rosineide Leão, Dominic Sauvageau, Sandra Maria Luz i Anastasia Elias. "Influence of Epoxidized Canola Oil (eCO) and Cellulose Nanocrystals (CNCs) on the Mechanical and Thermal Properties of Polyhydroxybutyrate (PHB)—Poly(lactic acid) (PLA) Blends". Polymers 11, nr 6 (29.05.2019): 933. http://dx.doi.org/10.3390/polym11060933.
Pełny tekst źródłaGalimberti, M., V. Barbera, S. Guerra i A. Bernardi. "FACILE FUNCTIONALIZATION OF sp2 CARBON ALLOTROPES WITH A BIOBASED JANUS MOLECULE". Rubber Chemistry and Technology 90, nr 2 (1.06.2017): 285–307. http://dx.doi.org/10.5254/rct.17.82665.
Pełny tekst źródłaKuete, Martial Aime, Pascal Van Velthem, Wael Ballout, Bernard Nysten, Jacques Devaux, Maurice Kor Ndikontar, Thomas Pardoen i Christian Bailly. "Integrated Approach to Eco-Friendly Thermoplastic Composites Based on Chemically Recycled PET Co-Polymers Reinforced with Treated Banana Fibres". Polymers 14, nr 22 (8.11.2022): 4791. http://dx.doi.org/10.3390/polym14224791.
Pełny tekst źródłaChoudhury, Atun Roy. "Techno-commercial Assessment of Concurrent Municipal Brown Field Reclamation Procedures: A Pivotal Case study of Jawahar Nagar Dump Site". Journal of Toxicology and Environmental Sciences 1, nr 1 (6.07.2021): 23–33. http://dx.doi.org/10.55124/jtes.v1i1.35.
Pełny tekst źródłaDesnoes, Eric, Lotfi Toubal, Dominic Thibeault, Amel Hadj Bouazza i Daniel Montplaisir. "Bio-sourced vinyl ester resin reinforced with microfibrillar cellulose: Mechanical and thermal properties". Polymers and Polymer Composites, 19.03.2021, 096739112110020. http://dx.doi.org/10.1177/09673911211002046.
Pełny tekst źródłaParikh, Hiral H., Sagar Chokshi, Vijay Chaudhary, Ankit D. Oza i Chander Prakash. "Development and characterization of eco-friendly extruded green composites using PLA/wood dust fillers". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 21.02.2024. http://dx.doi.org/10.1177/13506501241233628.
Pełny tekst źródłaHelaili, Sofiene, i Moez Chafra. "Identification of mechanical properties of a braided alfa stem (Stipa tenacissima L.) by an inverse method". Journal of Composite Materials, 19.12.2022, 002199832211476. http://dx.doi.org/10.1177/00219983221147685.
Pełny tekst źródłaGharbi, Abderrezak, Aziez Zeddouri, Abdelhafid Gherfi i Kamal Bouchemaa. "Elaboration and Characterization of the Mechanical Properties and Moisture Buffer Value of a Composite Based on Lime and Date Palm Petiole Fibre". Annals of West University of Timisoara - Physics, 23.08.2022. http://dx.doi.org/10.2478/awutp-2022-0005.
Pełny tekst źródłaWendland, Rion J., Matthew T. Conway i Kristan S. Worthington. "Evaluating the polymerization effectiveness and biocompatibility of bio‐sourced, visible light‐based photoinitiator systems". Journal of Biomedical Materials Research Part A, 4.04.2024. http://dx.doi.org/10.1002/jbm.a.37715.
Pełny tekst źródłaParikh, Ankit R., Karen P. Cortés‐Guzmán, Ning Bian, Rebecca M. Johnson, Ronald A. Smaldone, Hongbing Lu i Walter E. Voit. "Surface‐methacrylated microcrystalline cellulose bioresins with soybean oil for additive manufacturing via vat photopolymerization". Journal of Polymer Science, 4.03.2024. http://dx.doi.org/10.1002/pol.20230700.
Pełny tekst źródłaWu, Junqi, Rodrick D. Wiggins, Casey H. Weaver, Gerard Kugel i David L. Kaplan. "Thermoplastic molding of silk protein composite plastic toothbrush handles with on-demand degradability". Frontiers in Sustainability 4 (30.06.2023). http://dx.doi.org/10.3389/frsus.2023.1169487.
Pełny tekst źródła