Gotowa bibliografia na temat „Bicomponent melt spinning”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Bicomponent melt spinning”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Bicomponent melt spinning"
Radhakrishnan, J., Takeshi Kikutani i Norimasa Okui. "High-Speed Melt Spinning of Sheath-Core Bicomponent Polyester Fibers: High and Low Molecular Weight Poly(ethylene Terephthalate) Systems". Textile Research Journal 67, nr 9 (wrzesień 1997): 684–94. http://dx.doi.org/10.1177/004051759706700908.
Pełny tekst źródłaBostan, Lars, Omid Hosseinaei, Renate Fourné i Axel S. Herrmann. "Upscaling of lignin precursor melt spinning by bicomponent spinning and its use for carbon fibre production". Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 379, nr 2209 (13.09.2021): 20200334. http://dx.doi.org/10.1098/rsta.2020.0334.
Pełny tekst źródłaLund, Anja, Christian Jonasson, Christer Johansson, Daniel Haagensen i Bengt Hagström. "Piezoelectric polymeric bicomponent fibers produced by melt spinning". Journal of Applied Polymer Science 126, nr 2 (8.04.2012): 490–500. http://dx.doi.org/10.1002/app.36760.
Pełny tekst źródłaHufenus, Rudolf, Ali Gooneie, Tutu Sebastian, Pietro Simonetti, Andreas Geiger, Dambarudhar Parida, Klaus Bender, Gunther Schäch i Frank Clemens. "Antistatic Fibers for High-Visibility Workwear: Challenges of Melt-Spinning Industrial Fibers". Materials 13, nr 11 (10.06.2020): 2645. http://dx.doi.org/10.3390/ma13112645.
Pełny tekst źródłaLin, Xiaofang, Wenbo Sun, Minggang Lin, Ting Chen, Kangming Duan, Huiting Lin, Chuyang Zhang i Huan Qi. "Bicomponent core/sheath melt-blown fibers for air filtration with ultra-low resistance". RSC Advances 14, nr 20 (2024): 14100–14113. http://dx.doi.org/10.1039/d4ra02174f.
Pełny tekst źródłaLi, Jianhua, Yatao Wang, Xiaodong Wang i Dezhen Wu. "Crystalline Characteristics, Mechanical Properties, Thermal Degradation Kinetics and Hydration Behavior of Biodegradable Fibers Melt-Spun from Polyoxymethylene/Poly(l-lactic acid) Blends". Polymers 11, nr 11 (25.10.2019): 1753. http://dx.doi.org/10.3390/polym11111753.
Pełny tekst źródłaGan, Xue Hui, Na Na Liu, Xiao Jian Ma, Qiang Liu i Chong Chang Yang. "Study on the Co-Extrusion Process Morphology and Performance of Skin-Core Bicomponent Fiber". Advanced Materials Research 332-334 (wrzesień 2011): 553–59. http://dx.doi.org/10.4028/www.scientific.net/amr.332-334.553.
Pełny tekst źródłaMaqsood, Muhammad, i Gunnar Seide. "Novel Bicomponent Functional Fibers with Sheath/Core Configuration Containing Intumescent Flame-Retardants for Textile Applications". Materials 12, nr 19 (23.09.2019): 3095. http://dx.doi.org/10.3390/ma12193095.
Pełny tekst źródłaLiu, Zenan, Diefei Hu, Juming Yao, Yan Wang, Guoqing Zhang, Dana Křemenáková, Jiri Militky, Jakub Wiener, Li Li i Guocheng Zhu. "Fabrication and Performance of Phase Change Thermoregulated Fiber from Bicomponent Melt Spinning". Polymers 14, nr 9 (6.05.2022): 1895. http://dx.doi.org/10.3390/polym14091895.
Pełny tekst źródłaXiang, Guodong, Hongjing Hua, Qingwen Gao, Jingwen Guo, Xuzhen Zhang i Xiuhua Wang. "Fabrication and Properties of Self-crimp Side-by-Side Bicomponent Filaments Composed of Polyethylene Terephthalates with Different Intrinsic Viscosity". Fibres & Textiles in Eastern Europe 151, nr 2 (28.05.2022): 68–74. http://dx.doi.org/10.2478/ftee-2022-0009.
Pełny tekst źródłaRozprawy doktorskie na temat "Bicomponent melt spinning"
Kaleem, ullah Hafiz Muhammad. "Développement de fibres bicomposantes innovantes pour le textile de confort thermique". Electronic Thesis or Diss., Centrale Lille Institut, 2022. http://www.theses.fr/2022CLIL0034.
Pełny tekst źródłaThis study is part of Interreg European Project between Haute de France and Belgium. The project is called Photonitex. The aim of this project is to develop a personal thermal regulation intelligent textile that dynamically controls skin temperature. This work was done in collaboration between Centre Européen des Textiles Innovants (CETI) and School National Superior of Textile Arts and Industries (ENSAIT).The objective of this thesis is to develop a bicomponent fibers for thermal comfort textile. The literature review was done to select the most suitable polymer materials that are commonly used in textile industry. In addition, based on the literature review, the design of the trilobal bicomponent fibers was finalized to realize the dynamic thermal comfort textile. Moreover, used polymer materials must exhibit hydrophilic difference to achieve the dynamic thermal properties in fabrics. The inner material of this bicomponent trilobal fiber must be more hydrophilic than the outer material. PA6 and PA6-6 were selected as hydrophilic core and PET hydrophobic outer material for trilobal bicomponent filaments. However, PA6 and PA6-6 are incompatible and immiscible to PET. The major challenge to achieve the desired bicomponent fibers is to acquire a sufficient adhesion at the interface to avoid the pre-splitting or separation between these two polymer materials. In order to improve their miscibility at the interface PA12 was added in PA6 and PA6-6 at 5, 10, 15% wt % via polymer compounding process. In order to produce trilobal bicomponent filament via coextrusion melt spinning process, rheological behavior of the used polymer materials play an important role. To select the most suitable materials for trilobal bicomponent fiber, rheological studies were conducted on pure and polymer blends using capillary rheometer. In addition, hydrophilic properties of each polymer and their blends were also tested on knitted fabrics with contact angle and wicking measurements. To evaluate the effect of PA12 on PET and PA6 interfacial adhesion, bicomponent PET/PA6 sheath/core fibers were produced via melt spinning process and interfacial adhesion was investigated through techniques (tensile test, dynamic mechanical thermal analysis (DMTA), Wide Angle Xray Diffraction (WAXD), Differential scanning calorimetry (DSC), and Scanning Electron Microscope (SEM)). Based on the obtained results from the above mentioned techniques, the most suitable composition was produced in trilobal bicomponent fibers for thermal comfort fabrics. Simulation studies were also performed using Compuplast 3D FEM software to optimize the melt spinning process settings and produce trilobal bicomponent fibers.The textile made out of such innovative bicomponent fibers will show a self-actuation phenomenon are autonomous, self-empowered, and adaptive to the environment. This will help to mitigate the higher energy consumptions by conventional indoor heating, cooling, and ventilation systems and eventually minimizes the global energy consumptions and climate issues
Zapletalova, Terezie. "Mechanisms in bicomponent fiber spinning during melt blown process". 2009. http://www.lib.ncsu.edu/theses/available/etd-12152008-192950/unrestricted/etd.pdf.
Pełny tekst źródłaStreszczenia konferencji na temat "Bicomponent melt spinning"
Jakubowski, Konrad, Rudolf Hufenus, Jasmin Smajic i Manfred Heuberger. "Bicomponent melt-spinning of polymer optical fibers". W Bragg Gratings, Photosensitivity and Poling in Glass Waveguides and Materials. Washington, D.C.: OSA, 2018. http://dx.doi.org/10.1364/bgppm.2018.jtu5a.78.
Pełny tekst źródłaErdogan, Umit Halis, i Figen Selli. "Bicomponent spinning of biodegradable polymers: Melt-spun PHBV micro fibers". W PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-38). AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0208018.
Pełny tekst źródłaRoungpaisan, N., W. Takarada i T. Kikutani. "High-speed melt spinning of sheath/core bicomponent fibers of poly(L-lactide)s with different molecular weight". W MATERIALS CHARACTERIZATION USING X-RAYS AND RELATED TECHNIQUES. Author(s), 2019. http://dx.doi.org/10.1063/1.5088288.
Pełny tekst źródła