Zaloguj się

Gotowe bibliografie tematyczne / Automatic Design / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Automatic Design.

Artykuły w czasopismach na temat „Automatic Design”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 14 marca 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Automatic Design”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Özdilli, Özgür. "Design and manufacture of automatic plastic valve welding machine". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 235, nr 4 (27.01.2021): 1017–26. http://dx.doi.org/10.1177/0954408920988214.

Pełny tekst źródła

Streszczenie:

Plastic welding method is a widely used technology for the welding of pressure and vacuum bags using plastic valves. Conducting this process with traditional methods creates disadvantages in terms of production speed, product quality and economical aspects. Today, assembly costs make up the majority of total production costs, manufacturers pay more attention to assembly automation and work in this direction in order to reduce costs, speed up the production process and increase efficiency. In this study, it is aimed to design and manufacture a single Automatic Valve Welding Machine that can do all of these operations and integrated automation system instead of cutting, punching and plastic welding process that can be performed with multiple machines and workers. In this context, a new automated machine was designed in 3 D, and engineering analyzes were carried out to manufacture a prototype. In design, the machine has been made suitable for developing technology by using PLC (Programming Logic Controller) and pneumatic system. In addition, static analyzes of the machine were made. With the inclusion of a production-specific automatic controlled plastic welding machine, manufacturing can be done faster, with higher quality, lower costs and less wastage compared to the traditional manufacturing process.

Style APA, Harvard, Vancouver, ISO itp.

2

梁, 凯翔. "Automatic Generation of Digital Architectural Drawings in Taiwan Province". Design 06, nr 03 (2021): 39–45. http://dx.doi.org/10.12677/design.2021.63007.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Kadam, Mr Suraj Nivas. "Design of Automatic Barrier Detection and Blockage Removing System in Sowing Machine". International Journal for Research in Applied Science and Engineering Technology 9, nr VI (30.06.2021): 4863–67. http://dx.doi.org/10.22214/ijraset.2021.36018.

Pełny tekst źródła

Streszczenie:

This paper presents the idea of the automatic system which detects and removes the blockages automatically in the pipes of seeder machine or sowing machine. This automatic system is very useful for many farmers. As increase in the technology, all the sector needs automation in every system. In current generation most of countries do not have sufficient manpower specially in agriculture sector. So there is need to develop equipment which will reduce the efforts of farmers. This system introduces a control mechanism which aims to detect blockages in the pipes of sowing machine and automatic removal of it by developing mechanism. Objective of this system is to develop a totally automated system for seed sowing process. Hence by replacing a manual system, develop a secure, reliable and efficient system.

Style APA, Harvard, Vancouver, ISO itp.

4

A. Sivasubramanian, A. Sivasubramanian, M. Jagadish M.Jagadish i C. Sivaram C.Sivaram. "Design and Modification of Semi Automatic Stacker". Indian Journal of Applied Research 4, nr 4 (1.10.2011): 174–78. http://dx.doi.org/10.15373/2249555x/apr2014/53.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Kumar, Arun V. Rejus, i A. Sagai Francis Britto. "Design and Fabrication of Automatic Flying Camera". International Journal of Psychosocial Rehabilitation 23, nr 4 (20.07.2019): 320–30. http://dx.doi.org/10.37200/ijpr/v23i4/pr190190.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Zhu, Yahong, i Jian Jiao. "Automatic Control System Design for Industrial Robots Based on Simulated Annealing and PID Algorithms". Advances in Multimedia 2022 (26.05.2022): 1–8. http://dx.doi.org/10.1155/2022/9226576.

Pełny tekst źródła

Streszczenie:

The industry is at the heart of a country’s development, and robot automation is the key to this. The automation of industrial robots is extremely beneficial to industrial development. Although China has been increasing its investment in industrial robot automation and control research, there are still many problems in the field of automation and control in the application of industrial robot technology, and there is still a certain gap between the developed countries. On the one hand, this is a serious obstacle to the development of industrial robotics in China, and on the other hand, it has a direct impact on the automation of industrial production, which has a very restrictive effect on industrial development. Therefore, it is necessary to focus on the value of computer technology, automation control technology, and sensor technology in the field of automation. The use of industrial robots can replace monotonous manual labour, reduce the intensity of operations, and increase productivity through high operational precision values. Scientific progress has driven the development process of industrial automation to a new level, allowing fully automated production equipment to become mainstream and gradually replace manual operations. In recent years, the development of industrial automation has led to the development of a series of related industries, of which automated manipulators are one. As a new automatic production line operation equipment, the development of manipulators can greatly improve the automation production level of enterprises and improve labour efficiency. This paper explores the development status of automated manipulators and explore the optimal motion path of manipulators in automatic control engineering by combining simulated annealing algorithm and PID algorithm, so as to greatly enhance the application of truss manipulators in production lines.

Style APA, Harvard, Vancouver, ISO itp.

7

Li, Tao. "Design of an Automatic Detector for Gas Desorption of Coal Samples". Instrumentation Mesure Métrologie 19, nr 5 (15.11.2020): 355–61. http://dx.doi.org/10.18280/i2m.190505.

Pełny tekst źródła

Streszczenie:

Gas content measurement is a common technique in the prevention of coalmine gas disasters. During the measurement, the gas desorption amount of field coal samples needs to be obtained by an instrument working under the principle of gas collection by water displacement (GCWD). The instrument is poorly automated, and susceptible to the influence of subjective factors. To overcome these defects, this paper designs an automatic detector of gas desorption, aiming to realize automated detection. Firstly, the authors analyzed the gas desorption detection process, and clarified the contents and features of the information to be collected. On this basis, the hardware and software systems of the multi-data automatic detector were developed based on digital circuit design and multi-sensor detection. To further improve the measuring accuracy of gas desorption, the multi-range multi-stage mode was introduced to the automatic detector. Application results show that the proposed detector can automatedly collect and store gas desorption amount, ambient pressure, and temperature, greatly improve the degree of automation, and minimize the influence of subjective factors. The popularization of this detector will make gas desorption measurement more efficient and effective, laying a solid basis for the prevention of coalmine gas disasters.

Style APA, Harvard, Vancouver, ISO itp.

8

Chen, Shou An, Jin Ge Wang i Xing Qiao Deng. "The Design of New Type Food Mixer". Advanced Materials Research 951 (maj 2014): 71–75. http://dx.doi.org/10.4028/www.scientific.net/amr.951.71.

Pełny tekst źródła

Streszczenie:

To solve the problem that in the pickled vegetable production, factory still use artificial labor ignore automated production. this situation lead to low productivity of Chinese pickled vegetable process. The other problem is that manual operations on the food quality, taste and health is difficult to control. In order to solve these two problems, I designed a new automated food mixer which apply automation technology, automatic weighing the main ingredient of feed and feed materials. only one person can completed the whole requires that from feeding to stirring. It can greatly reduces labor costs and labor intensity, the popularize of the food mixer will create a lot of economic value.

Style APA, Harvard, Vancouver, ISO itp.

9

战, 思宇. "Structure Design of Automatic Adding Machine for Pastry Flavor Materials". Design 06, nr 04 (2021): 57–60. http://dx.doi.org/10.12677/design.2021.64010.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Li, Wei, Decheng Wang i Peng Cheng. "Design and Research of Automatic Tool Changer System for Multistation Spring Forming Machine". Journal of Robotics 2020 (1.12.2020): 1–9. http://dx.doi.org/10.1155/2020/4635056.

Pełny tekst źródła

Streszczenie:

Currently, the spring machine tool is fixed by means of manual clamping and positioning by bolts. The automation of the tool change is low, and the accurate value of the tool position cannot be determined. The automatic tool change system for spring machine was designed by using the standard functional parts of the automatic tool change system of the machining center. It mainly includes the design of the automatic loose clamp device and that of the multispindle automatic tool change arm. After static analysis, the deformation of the automatic tool change arm is 0.153 mm, which satisfies the requirements for usage. Kinematic analysis of the designed automatic tool change arm was carried out. After actual verification, the designed automatic tool change system of spring machine realizes the functions of the tools automatic replacement and positioning of the spring machine, which improves the automation of the spring forming equipment.

Style APA, Harvard, Vancouver, ISO itp.

11

Shi, Qing Ping, i Yi Min Mo. "Design of Double Closed Loop Control System of Automatic Clutch". Advanced Materials Research 383-390 (listopad 2011): 237–42. http://dx.doi.org/10.4028/www.scientific.net/amr.383-390.237.

Pełny tekst źródła

Streszczenie:

The control system of automatic clutch is based on the manual gearbox instead of the clutch pedal. It realizes automated clutch and manual shifting. The essence of automatic clutch is how to control the motor drive unit to achieve the implementation of the automatic clutch separation and bonding, and thus automatic speed technology of motor is the key. In this paper, combining the characteristics of micro-car, a double-loop automatic motor speed control system is designed. The design is proved reasonable and feasible through simulation based on MATLAB.

Style APA, Harvard, Vancouver, ISO itp.

12

Tian, Su Bo, i Li Chun Qiu. "Design on Plug Seedling Automatic Transplanter in Greenhouse". Advanced Materials Research 317-319 (sierpień 2011): 586–89. http://dx.doi.org/10.4028/www.scientific.net/amr.317-319.586.

Pełny tekst źródła

Streszczenie:

Transplanting of plug seedling is one of the most important operations during vegetable and flower production. Due to the higher labor intensity and lower efficiency for the operation, it is difficult to enlarge production scale for vegetables and flowers. Although transplanting of plug seedling is now common method, all operations are still manually conducted in China. To enlarge productivity for increasing food supply, it has become an urgent task to achieve automation of plug seedling transplanting for Chinese horticulture industry. This paper deals with the automatic transplanter for plug seedling, which is significant to promote development of production automation of seedling nursing and transplanting in China. Then, the simple, practical automatic transplanter for plug seedling, including manipulator, conveyor system for plug tray and flowerpots, overall structure and PLC control system was designed. Finally, Prototype was manufactured and performance tests were conducted. Results showed that the automatic transplanter had reliable transplanting performance.

Style APA, Harvard, Vancouver, ISO itp.

13

Du, Dong, Jun Ying Zhao, Jian Yuan Lu, Cheng Sheng Wang i Feng Chuang Yu. "The Design of Industrial Robot Sorting and Pallet System". Applied Mechanics and Materials 536-537 (kwiecień 2014): 1009–14. http://dx.doi.org/10.4028/www.scientific.net/amm.536-537.1009.

Pełny tekst źródła

Streszczenie:

industrial assembly line development in the direction of automation and flexibility. Not only more and more automated machinery and more industrial manipulator into the production line. Manipulator instead of artificial heavy labor, realize mechanization, automation and flexibility production process. But in the process of production, first of all to the parts, then is all kinds of processing actions. So, will the application of automatic identification in combination with manipulator is very necessary. This paper introduces a can demonstrate the technology training equipment, from the development of the technology are integrated into the software are introduced. Hope that this technology can be widely used in industrial production.

Style APA, Harvard, Vancouver, ISO itp.

14

Brdjanin, Drazen, i Slavko Maric. "An approach to automated conceptual database design based on the IML activity diagram". Computer Science and Information Systems 9, nr 1 (2012): 249–83. http://dx.doi.org/10.2298/csis110318069b.

Pełny tekst źródła

Streszczenie:

This paper presents an approach to the automated design of the initial conceptual database model. The UML activity diagram, as a frequently used business process modeling notation, is used as the starting point for the automated generation of the UML class diagram representing the conceptual database model. Formal rules for automated generation cover the automatic extraction of business objects and business process participants, as well as the automatic generation of corresponding classes and their associations. Based on these rules we have implemented an automatic generator and evaluated it on a real business model.

Style APA, Harvard, Vancouver, ISO itp.

15

Zhang, Shu Lan, i Nan Qiao Zhang. "Secondary Development of Automatic Drawing Software of Spindle of Numerical Control Lathe". Applied Mechanics and Materials 109 (październik 2011): 571–74. http://dx.doi.org/10.4028/www.scientific.net/amm.109.571.

Pełny tekst źródła

Streszczenie:

Looking up data mainly depends on the designer. Automation of looking up related data of charts, curve resource is a key to automatic design of common components, and is neccessory to be solved for strength and structural design automation of common components. A continuous curve on the logarithmic coordinates taken automatically search algorithm and discrete forms of data management and automated check to take the basic data structure to solve all the data graphs and charts automatically check the computer taken. With computer technology, in mechanical product design, various standards curves and tables can be processed.

Style APA, Harvard, Vancouver, ISO itp.

16

Mendoza-Calderón, Karen Daritza, Jordy Andres Maldonado Jaimes, Jessica Gissella Maradey-Lazaro, Arly Dario Rincón-Quintero i Carlos Gerardo Cardenas-Arias. "Design of an Automatic Palletizer". Journal of Physics: Conference Series 2224, nr 1 (1.04.2022): 012095. http://dx.doi.org/10.1088/1742-6596/2224/1/012095.

Pełny tekst źródła

Streszczenie:

Abstract Industrial automation has become an area in full development and of great importance for all industrial sectors since it allows to improve the productivity of companies and the quality of their products. Currently, factories (i.e., small, or medium) must implement new technologies to increase its production and provide qualified products to enter with force in regional markets and nationals. This article shows the design and start up of an automatic palletizer which will have a manual mode in which each actuator in the system can be operated independently; and an automatic mode that will organize the input elements in the previously established way. For companies that produce in batches, is important to reduce storage spaces in warehouses, dispose of their products in an orderly and practical way for their subsequent dispatch. This last process must be effective and fast so as not to generate inconveniences in the delivery of orders to buyers. Our project is focused to the footwear sector, especially, how to seek greater development and performance of these companies where the packaging time of their products can be optimized so that it can be used in other tasks within the company. Also, the result of this investigation shows the engineering process carried out to obtain a prototype of a functional, automatic, productive, quality, and economic product that meets the customer’s requirements. Improvements that will do and future work are included too.

Style APA, Harvard, Vancouver, ISO itp.

17

Hassan, Arwa Abdel Mohsen Ahmed. "Traffic light automatic design". IOSR Journal of Engineering 4, nr 10 (październik 2014): 45–47. http://dx.doi.org/10.9790/3021-041024547.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Sun, Leilei, Chuanren Liu, Guoqing Chen, Chonghui Guo, Hui Xiong i Yanming Xie. "Automatic Treatment Regimen Design". IEEE Transactions on Knowledge and Data Engineering 33, nr 11 (1.11.2021): 3494–506. http://dx.doi.org/10.1109/tkde.2020.2972276.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Faure, Christèle. "Automatic Differentiation Platform: Design". ESAIM: Mathematical Modelling and Numerical Analysis 36, nr 5 (wrzesień 2002): 783–92. http://dx.doi.org/10.1051/m2an:2002042.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Pakrouski, Kiryl. "Automatic design of Hamiltonians". Quantum 4 (2.09.2020): 315. http://dx.doi.org/10.22331/q-2020-09-02-315.

Pełny tekst źródła

Streszczenie:

We formulate an optimization problem of Hamiltonian design based on the variational principle. Given a variational ansatz for a Hamiltonian we construct a loss function to be minimised as a weighted sum of relevant Hamiltonian properties specifying thereby the search query. Using fractional quantum Hall effect as a test system we illustrate how the framework can be used to determine a generating Hamiltonian of a finite-size model wavefunction (Moore-Read Pfaffian and Read-Rezayi states), find optimal conditions for an experiment or "extrapolate" given wavefunctions in a certain universality class from smaller to larger system sizes. We also discuss how the search for approximate generating Hamiltonians may be used to find simpler and more realistic models implementing the given exotic phase of matter by experimentally accessible interaction terms.

Style APA, Harvard, Vancouver, ISO itp.

21

Ciampoli, Fabio, John W. Chew, Shahrokh Shahpar i Elisabeth Willocq. "Automatic Optimization of Preswirl Nozzle Design". Journal of Engineering for Gas Turbines and Power 129, nr 2 (1.02.2006): 387–93. http://dx.doi.org/10.1115/1.2364194.

Pełny tekst źródła

Streszczenie:

The objective of the research described here is to develop and demonstrate use of automatic design methods for preswirl nozzles. Performance of preswirled cooling air delivery systems depends critically on the design of these nozzles which is subject to manufacturing and stress constraints. The best solution may be a compromise between cost and performance. Here it is shown that automatic optimization using computational fluid dynamics (CFD) to evaluate nozzle performance can be useful in design. A parametric geometric model of a nozzle with appropriate constraints is first defined and the CFD meshing and solution are then automated. The mesh generation is found to be the most delicate task in the whole process. Direct hill climbing (DHC) and response surface model (RSM) optimization methods have been evaluated. For the test case considered, significant nozzle performance improvements were obtained using both methods, but the RSM model was preferred.

Style APA, Harvard, Vancouver, ISO itp.

22

Li, C. L., K. W. Chan i S. T. Tan. "Automatic design by configuration space: an automatic design system for kinematic devices". Engineering Applications of Artificial Intelligence 12, nr 5 (październik 1999): 613–28. http://dx.doi.org/10.1016/s0952-1976(99)00029-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Duan, Xiao Bin, Hai Tao Wu i Hong Bin Liu. "The Design on Automatic Feed Punching Mechanism on SolidWorks". Advanced Materials Research 655-657 (styczeń 2013): 273–76. http://dx.doi.org/10.4028/www.scientific.net/amr.655-657.273.

Pełny tekst źródła

Streszczenie:

Established the model of automatic feed punching mechanism by using 3D modeling software SolidWorks, we finished the 3D model of parts and parts assembly according to the design automatic feed punching mechanism’s requirements. This design based on the double-crank seven-bar mechanism as pressing mechanism and cam mechanism as feeding mechanism, completed the combination of pressing mechanism and feeding mechanism and the automation of the mechanism.

Style APA, Harvard, Vancouver, ISO itp.

24

Ren, De Zhi, Yu Guang Guo i Li Ping Xu. "Design of Electric Connector’s Automatic Assembly System". Advanced Materials Research 328-330 (wrzesień 2011): 1973–76. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.1973.

Pełny tekst źródła

Streszczenie:

For improving assembly quality and automation of electric connectors, a solution of automatic assembly is discussed in this paper. With the machinery vision system, defects of the parts to be assembled can be real-time surveyed. By using the complex image recognition technology, the recognizing accuracy and reliability can be achieved. The designs of NC dividing head and smart positioning unit can make the process of transmission and assembly more perfect and effective. The optimal design of the mechanical structure has been made by virtual prototype technology. The designs of PLC control system and pneumatic system which are used in the automatic assembly machine have also been discussed. The control strategies of assembling process are quite challenges. The control profile of three stages has been used in the pressing assembly process, which can punch the parts assembled properly and smoothly without any surface damage. Also the application shows that the design is effective.

Style APA, Harvard, Vancouver, ISO itp.

25

Deng, Yuan Chao, Min Yu i Hua Chen. "Design of Automatic Buckle Machine for Double Bag Packaging Line". Advanced Materials Research 889-890 (luty 2014): 303–8. http://dx.doi.org/10.4028/www.scientific.net/amr.889-890.303.

Pełny tekst źródła

Streszczenie:

Double bag packaging line which is widely used in packing line is a packing type. There are traditional double bag packaging line and automatic packaging line. Among them, the automated packaging line processes include: On the bag, filling, bayonet, seaming, transporting, stacking and other processes. However, bayonet is an essential process in packaging line. The design of automatic buckle machine plays a key role in reducing labor intensity, improving production efficiency of filling line and ensuring product quality. This paper conducts a discussion and analysis in depth on automatic bayonet machine design.

Style APA, Harvard, Vancouver, ISO itp.

26

Hamidavi, Tofigh, Sepehr Abrishami, Pasquale Ponterosso, David Begg i Nikos Nanos. "OSD". Construction Innovation 20, nr 2 (14.03.2020): 149–69. http://dx.doi.org/10.1108/ci-11-2019-0126.

Pełny tekst źródła

Streszczenie:

Purpose The paper aims to leverage the importance of the integrated automatic structural design for tall buildings at the early stage. It proposes to use an automatic prototype to perform the structural design, analysis and optimisation in a building information modelling (BIM)-based platform. This process starts with extracting the required information from the architectural model in Revit Autodesk, such as boundary conditions and designs different options of the structural models in Robot Autodesk. In this process, Dynamo for Revit is used to define the mathematical functions to use different variables and generate various structural models. The paper aims to expand the domain of automation in the BIM platform to reduce the iterative process in different areas such as conceptual structural design and collaboration between architects and structural engineers to reduce the time and cost at the early stages. Design/methodology/approach The paper begins with an exploratory research by adopting a qualitative methodology and using open-ended questions to achieve more information about the phenomenon of automation and interoperability between structural engineers and architects and gain new insight into this area. Furthermore, correlation research is used by adopting quantitative and short questions to compare the proposed prototype with the traditional process of the structural design and optimisation and the interoperability between architects and engineers and consequently, validate the research. Findings As an outcome of the research, a structural design optimisation (SDO) prototype was developed to semi-automate the structural design process of tall buildings at the early stages. Moreover, the proposed prototype can be used during the early stage of structural design in different areas such as residential buildings, bridges, truss, reinforced concrete detailing, etc. Moreover, comprehensive literature regarding using automation in structural design, optimisation process and interoperability between architects and engineers is conducted that provides a new insight to contribute to future research and development. Research limitations/implications Due to the time limit, the paper results may lack in a comprehensive automatic structural design process. Therefore, the researchers are encouraged to expand the workability of the prototype for a comprehensive automatic design check such as automatic design for the minimum deflection, displacement of different types of buildings. Practical implications The prototype includes implications for the development of different automatic designs. Originality/value The focus of this paper is the optimisation of the structural design in the BIM platform by using automation. This combination is one of the novelties of this paper, and the existing literature has a very limited amount of information and similar work in this area, especially interoperability between architects and engineers.

Style APA, Harvard, Vancouver, ISO itp.

27

Gupta, Vijay Kumar, Himanshu Singh i Mohak Gupta. "Automatic Temperature Controlled Air Cooler: Design, Assembly and Testing". International Journal of Trend in Scientific Research and Development Volume-3, Issue-3 (30.04.2019): 1334–36. http://dx.doi.org/10.31142/ijtsrd23327.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Bansal, Dr Pikesh, Abhinav Srivastava i Aadil Zaya Bhuvnesh Sharma Anuj Upadhyay. "Design and Fabrication of Automatic Speed Controller for Automobile". International Journal of Trend in Scientific Research and Development Volume-3, Issue-4 (30.06.2019): 524–27. http://dx.doi.org/10.31142/ijtsrd23846.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Shang, Chun Min, Dong Mei Zhang i Xin Ming Zhang. "Subsurface Safety Valve Automation Test Systems Design". Applied Mechanics and Materials 543-547 (marzec 2014): 1188–91. http://dx.doi.org/10.4028/www.scientific.net/amm.543-547.1188.

Pełny tekst źródła

Streszczenie:

To the subsurface safety valve testing, an intelligent automatic test system is designed based on the control computer and programmable logic controller. Based on modular concept, the entire system is mainly composed of mechanical components and computer control system. The working principle is analyzed for the subsurface safety valve test. The control system based on the Labview and PLC can accomplish hydraulic and gas testing with functions of the testing process control, data collection and analysis, automatic generating test report, friendly interface and high degree automation. Experiments prove that the test system can achieve expected effect and satisfy the test requirement, and the procedure is simple and convenient. The system has great significance to improve the subsurface safety valve test accuracy, efficiency and automation level.

Style APA, Harvard, Vancouver, ISO itp.

30

Muneer, Amgad, i Zhan Dairabayev. "Design and implementation of automatic painting mobile robot". IAES International Journal of Robotics and Automation (IJRA) 10, nr 1 (1.03.2021): 68. http://dx.doi.org/10.11591/ijra.v10i1.pp68-74.

Pełny tekst źródła

Streszczenie:

Wall painting is a repetitive, stressful, and hazardous process that makes it an ideal automation case. In the automotive industry, painting had been automated but not yet for the construction industry. However, there is a strong need for a mobile robot that can move to paint residential interior walls. In this study, we aim to design and implement an automatic painting mobile robot. The conceptual design of the proposed wall painting robot consisting paint mechanism with a spray gun and ultrasonic sensor. The spray gun is attached to a pulley mechanism that has linear motion. The ultrasonic sensor is used to detect the spray gun when it reached a certain limit. The DC motor rotates clockwise and counterclockwise based on the ultrasonic sensor condition made. The experimental results indicate that the robot was able to paint the walls smoothly vertically, and horizontally. The spraying gun structure's speed is at a tolerable speed of 0.07 m/s, which could be increased, but to provide high-quality painting without any gaps, the current speed was selected as the most suitable, without any harm to the working process.

Style APA, Harvard, Vancouver, ISO itp.

31

Gajjar, Bhavya R., i Saurin Sheth. "Design and Automation in Back Plug Press Fitting Process of Ball Pen Assembly". Applied Mechanics and Materials 592-594 (lipiec 2014): 2596–600. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.2596.

Pełny tekst źródła

Streszczenie:

In today’s era automation in the production is a key parameter of interest. Rise in the productivity is the main aim of every industry. To sustain in the global era many companies are switching their assembly line from manual to automatic. Consequently, assembly systems should be more flexible and efficient. Even which process needs the automation should be justified to make it automatic. The amount of automation and payback period plays an important role. On that basis authors identify the back plug process needs to be automate. So an attempt is made to design an Automatic Back Plug Press Fitting Process. The paper describes the design, modeling and manufacturing aspects of this process. In automation decisions, it is necessary to consider human resources, as well as mechanical technology and information flow. The paper also includes rise in the productivity along with payback period.

Style APA, Harvard, Vancouver, ISO itp.

32

Chou, Yon-Chun, R. A. Srinivas i Sujit Saraf. "Automatic design of machining fixtures: Conceptual design". International Journal of Advanced Manufacturing Technology 9, nr 1 (styczeń 1994): 3–12. http://dx.doi.org/10.1007/bf01792862.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Zhang, Xiao Dong, i Jin Jin Zhang. "Dynamic Design of Six-Station Automatic Hydraulic Stretching Machine". Key Engineering Materials 522 (sierpień 2012): 256–59. http://dx.doi.org/10.4028/www.scientific.net/kem.522.256.

Pełny tekst źródła

Streszczenie:

Hydraulic stretch forming is a very important technology. Punch press has achieved multi-station automatic processing in the press area, which has greatly improved the efficiency. However, the main domestic stretching machine is single-stretching hydraulic machine at present. Compared with punch press, hydraulic stretching machines take less space and have better security, but they make less efficiency and have lower degree of automation. Hence, in order to take the advantage of hydraulic stretching machines and enhance the automation level, studies on multi-position automatic stretching machine occupies an important position. This paper proposes a design scheme of Six-station Automatic Hydraulic Stretching Machine (SAHSM) according to the practical production. The overall 3D structure of SAHSM is designed based on Solidworks to prove the theoretical possibility of the program. Then modal analysis is operated based on FEA of the key components of stretching machine module to improve reliability of the product and overcome the disadvantage of the traditional checking method, the first two-order modes are obtained to prove the impossibility of the resonance. At last, ADAMS-based virtual prototype is analyzed to demonstrate the feasibility and effectiveness of the SAHSM dynamic design proposed in this paper

Style APA, Harvard, Vancouver, ISO itp.

34

He, Ping, Ying Li, Guo Lei Gu i Meng Wang. "Milking Controller Design Based on Infrared Communication". Applied Mechanics and Materials 615 (sierpień 2014): 352–55. http://dx.doi.org/10.4028/www.scientific.net/amm.615.352.

Pełny tekst źródła

Streszczenie:

The automation of dairy farms attaches great importance in developed countries. They implement many preferential policies, technical and economic measures to prompt new automatic equipments , so as to reach a new stage of dairy farm development. Intelligent automatic milking controller has been applied widely and maturely in foreign countries whereas it falls behind relatively in our country. Along with the development of the information technology, it will be an irresistible trend of dairy farms to realize the digital management. The controller which is the core equipment of automatic dairy farm is studied in this paper. The controller uses the AVR microcomputer as its core and the software programming uses the C+ + language. This controller can also realize the infrared data communication with the higher computer. With the characteristics stood above, the controller can be applied to the existing milking machines of the dairy farm and it has a wide application prospect.

Style APA, Harvard, Vancouver, ISO itp.

35

Ejofodomi, O'tega, i Godswill Ofualagba. "Design of a Real Time Feedback Automation Irrigation System". European Journal of Engineering Research and Science 4, nr 12 (27.12.2019): 117–20. http://dx.doi.org/10.24018/ejers.2019.4.12.1685.

Pełny tekst źródła

Streszczenie:

This paper presents the design of a real time feedback control automated irrigation systems that consists of monitoring units, control units, irrigation pipeline valves, and a network of irrigation pipeline. The monitoring units continuously measure the soil moisture content in the irrigation blocks, and if the moisture content drops below a predetermined threshold for the particular crop under production, it sends a wireless message to the control units controlling the pipeline valves along the water flow channel, causing the control units to open the valves leading to the water source and commencing automatic irrigation. When the moisture content rises above a predetermined threshold for the crop, the monitoring units sends a wireless message to the control units, causing them to close the pipeline valves and cease automatic irrigation. An automatic irrigation system pipeline network optimization software has also been designed to plan, cost, and design the automatic irrigation system for a piece of land prior to installation.

Style APA, Harvard, Vancouver, ISO itp.

36

Ejofodomi, O'tega, i Godswill Ofualagba. "Design of a Real Time Feedback Automation Irrigation System". European Journal of Engineering and Technology Research 4, nr 12 (27.12.2019): 117–20. http://dx.doi.org/10.24018/ejeng.2019.4.12.1685.

Pełny tekst źródła

Streszczenie:

This paper presents the design of a real time feedback control automated irrigation systems that consists of monitoring units, control units, irrigation pipeline valves, and a network of irrigation pipeline. The monitoring units continuously measure the soil moisture content in the irrigation blocks, and if the moisture content drops below a predetermined threshold for the particular crop under production, it sends a wireless message to the control units controlling the pipeline valves along the water flow channel, causing the control units to open the valves leading to the water source and commencing automatic irrigation. When the moisture content rises above a predetermined threshold for the crop, the monitoring units sends a wireless message to the control units, causing them to close the pipeline valves and cease automatic irrigation. An automatic irrigation system pipeline network optimization software has also been designed to plan, cost, and design the automatic irrigation system for a piece of land prior to installation.

Style APA, Harvard, Vancouver, ISO itp.

37

Yang, Bo, Wen Jie Ding i Xiao Yu Zhang. "Research of Automatic and Security Ignition Device for Vanadium Iron Smelting Furnace". Advanced Materials Research 889-890 (luty 2014): 1022–26. http://dx.doi.org/10.4028/www.scientific.net/amr.889-890.1022.

Pełny tekst źródła

Streszczenie:

In order to solve the problem of safe automation ignition process for vanadium iron smelting furnace, characteristics of ignition process, matching problem of device to process and its security design direction were analyzed. The requirements of process safety improvement were proposed. Key designs includes ignition furnace trolley positioning mechanism, swinging arm mechanism, the fire pole stretching mechanism, safety parclose, security monitoring devices, automated process of electronic ignition and automatic withdrawal of ignition guns. Application shows 13 safety advantages. In the research, process analysis is foundation, it includes steps refinement of manufacturing operations process, the order, the status, and problems that may occur in each step, this method for automation safe ignition process building could be a reference for similar research and development.

Style APA, Harvard, Vancouver, ISO itp.

38

Liu, Jin Mei, Jun Hong Wang i Dong Hui Sun. "The Design and Application of Beverage Automatic Filling System". Applied Mechanics and Materials 563 (maj 2014): 366–71. http://dx.doi.org/10.4028/www.scientific.net/amm.563.366.

Pełny tekst źródła

Streszczenie:

The paper presents the design and application of the beverage automatic filling system based on Siemens S7-300 PLC and MP277 touch screen. Photoelectric sensor was used to precisely detect positions of the beverage bottle, which it arrives the fixed position, servo motor will control it stop. The Siemens S7-300 PLC was designed by the software of Siemens STEP 7 5.4. Touch Screen was designed by the software of WinCC Flexible 2008, which it and PLC communicated by DP lines. The beverage automatic filling system can real-time display the state and set up the parameters of the object. It was proved by practice that beverage automatic filling system reduces labor intensity and operational cost, increases automation degree, and improves production efficiency.

Style APA, Harvard, Vancouver, ISO itp.

39

Chen, Chen, Jian Mao i Xingwen Gan. "Design of Automated Warehouse Management System". MATEC Web of Conferences 232 (2018): 03049. http://dx.doi.org/10.1051/matecconf/201823203049.

Pełny tekst źródła

Streszczenie:

Aiming at the low degree of automation in production enterprises, real-time tracking and automatic access to warehouses are realized by developing warehouse management software. The paper first analyzes the system requirements, and then gives the overall design plan, through C#, MySQL and TCP. IP communication protocol, compiled a set of warehouse management system software. The actual application shows that the automation level and management efficiency of production enterprises are improved.

Style APA, Harvard, Vancouver, ISO itp.

40

KS, Srinidhi, i Ravi HK. "Automation Checks during PNR flow in IC Design". International Journal of Engineering Research in Electronics and Communication Engineering 9, nr 8 (30.08.2022): 6–10. http://dx.doi.org/10.36647/ijerece/09.08.a002.

Pełny tekst źródła

Streszczenie:

Automation is a technology in that there are different kind of approaches and procedures can be referred. The process of turning manual checks to automatic checks provides impressive benefits. Time saving, cost effective, higher quality, accurate result, less error in the tests which normally caused by human are the most important reasons to thinking about automation. The first and foremost step is to find out what should be automated. It is important to know the reason of automation if, it is worth or not. Here, the question is based on which reason it should decide for automation? For instance, after finishing all the runs of Innovus, Voltus, Pegasus, Quantus top level person must verify that whether it is meeting the specifications or not for checking that they need to go through all the audit files. Audit files doesn’t contain detailed information’s like incremental tag, tool version, time stamp, md5sum’s, waivable warnings, must fix warnings, must fix errors, input directory paths, Bump locations and VDD and VSS locations etc. and other factor is Time consuming.By doing automation it will gives required detailed information like latest incremental tag and tool version, md5sum its unique id, time stamp, errors, warnings, setup and hold views etc. so it can be automated by developing script using programming language called TCL (tool command language). These scripts will work for any block of a chip which is of 16nm technology.

Style APA, Harvard, Vancouver, ISO itp.

41

Sun, Yin Da, Bai Qing Zhou i Wen Qin Xu. "Design of an Automatic Feeding Device for Melting Tin-Ingot". Advanced Materials Research 538-541 (czerwiec 2012): 2945–48. http://dx.doi.org/10.4028/www.scientific.net/amr.538-541.2945.

Pełny tekst źródła

Streszczenie:

The paper covers an automatic feeding device for melting tin-ingot, which has advantages of improving working conditions, high automation, stable operation, good reliability, and thus has more applied value.

Style APA, Harvard, Vancouver, ISO itp.

42

He, Runqin. "Automatic Equipment Design of Intelligent Manufacturing Flexible Production Line Based on Industrial Motorized Spindle". International Journal of Information Systems and Supply Chain Management 15, nr 2 (kwiecień 2022): 1–13. http://dx.doi.org/10.4018/ijisscm.287627.

Pełny tekst źródła

Streszczenie:

Based on the previous research on the production line automation, this paper carries out further research and further design and development on the basis of the original production line automation equipment. In this paper, the overall design of the automatic production line is carried out, and the various systems in the automatic production line are optimized, and the backward instruments are eliminated, and then some more advanced and convenient instruments are applied. Then, the hardware and software of the automatic production line are studied respectively, and the human-computer interaction module and real-time main control circuit module are re developed, and the electric shaft is applied to the automatic production line. Finally, the fuzzy PID controller of the stepping motor is designed. The experiment shows that the fuzzy PID control scheme is better than the traditional PID control scheme. After the rationalization of the system, the quality robustness of proactive planning is improved obviously. Then, the temperature of motorized spindle was tested.

Style APA, Harvard, Vancouver, ISO itp.

43

Kumar, Anil, Sanket S. Naik Dessai i Shivaprasad Yadav. "Design and implementation of an automated office environment system using embedded sensors". International Journal of Reconfigurable and Embedded Systems (IJRES) 11, nr 1 (1.03.2022): 34. http://dx.doi.org/10.11591/ijres.v11.i1.pp34-48.

Pełny tekst źródła

Streszczenie:

<p><span lang="EN-US">Office automation is the process using machines with the help of embedded computing perform the office activities and its tools and applications. The office automated using computer-aided processing stored, visual and audio data to simplify, improve, and automate the power saving and time management of the organization. A very important component of office automation concerns the automation of employee centred activities such as authentication, automatic alerting of appointments and automatic powering on/off personal computer. The employee image is captured using Java media framework, attendance records for all employees is gathered and processed automatically, and they can be accessed from the database on a monthly or weekly basis. The various software and hardware components of the system were developed and integrated to form the Exypnos Office System and validated on real life scenarios. Java proved to be a versatile platform for implementing a project of this nature with diverse requirements. Web camera interfacing and image capturing are implemented in the Java environment with the help of Java media framework (JMF). Java short message service (SMS) application programming interface (API) and Bluetooth technology is used for sending schedules through SMS. Radio frequency identification (RFID) systems use many different frequencies, but the most common and widely used and supported by our reader is 125 kHz. Office automation systems have more benefits to an organization. The project is implemented on MS Windows platform and in future can be implemented in Linux platform.</span></p>

Style APA, Harvard, Vancouver, ISO itp.

44

Anguiano-Gijón, Carlos Alberto, Anibal Cid-Gaona, José Manuel Chávez-Delgado i Carlos Renato Vázquez. "On the Design of Regulation Controllers for Automation Systems with RCPetri". Applied Sciences 12, nr 7 (24.03.2022): 3294. http://dx.doi.org/10.3390/app12073294.

Pełny tekst źródła

Streszczenie:

Regulation control for Petri nets is a control framework that allows the design of sequence controllers for automation systems in a systematic and efficient way. In order to implement this control framework, the MATLAB® app RCPetri has been developed. In this work, the RCPetri tool functionalities are described, including model generation, automatic specification generation, automatic control design, model and control simulation, automatic translation to PLC code, and communication by Modbus TCP/IP and OPC UA. Furthermore, three examples are presented to illustrate the application of the tool and the regulation framework: an electro-pneumatic device, a process control system, and a robotic manufacturing cell under a decentralized control scheme.

Style APA, Harvard, Vancouver, ISO itp.

45

Jaramillo, Alfonso, Lorenz Wernisch, Stephanie Hery i Shosana Wodak. "Automatic Procedures for Protein Design". Combinatorial Chemistry & High Throughput Screening 4, nr 8 (1.12.2001): 643–59. http://dx.doi.org/10.2174/1386207013330724.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Tong, Hui Fen, Wei Liu, Yan Chi i Wei Wang. "Design of Automatic Scraping System". Advanced Materials Research 853 (grudzień 2013): 625–30. http://dx.doi.org/10.4028/www.scientific.net/amr.853.625.

Pełny tekst źródła

Streszczenie:

Based on the principle of hand scraping a set of automatic scraping system is designed in this paper. Machine tool bed consists of supporting chassis and cast iron sidewall, which has little deformation, good rigidity and high mechanical strength. And the operating floor features 3-Degree of Freedom with high precision. Guideway adopts imported linear guideway, featuring high precision, high load - bearing redundancy and long life. Scraping tool holder is stably installed in the hole at the end of the piston rod. By the electrical control system the cylinder can control scraping tool to do reciprocal motion stably. Scraping points on the surface of workpieces are captured by a CCD camera with high detection efficiency and accurate test data. The results show that the system is designed to greatly reduce labor intensity and improve scraping efficiency under the precondition of keeping good scraping quality.

Style APA, Harvard, Vancouver, ISO itp.

47

Shimizu, Masanori, Yoshinori Tanabe, Takashi Kamei i Minoru Fujimoto. "Automatic floodlight aiming design algorism". JOURNAL OF THE ILLUMINATING ENGINEERING INSTITUTE OF JAPAN 79, Appendix (1995): 136–37. http://dx.doi.org/10.2150/jieij1980.79.appendix_136.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Wang, Hao, i Dian Ren Chen. "Simple GPS Automatic Navigation Design". Advanced Materials Research 1044-1045 (październik 2014): 1545–48. http://dx.doi.org/10.4028/www.scientific.net/amr.1044-1045.1545.

Pełny tekst źródła

Streszczenie:

GPS vehicle navigation technology is the GPS technology emerges along with the rapid development of embedded technology, the auto industry, the market ofmore variety of products GPS navigation based on quality, technology gap, doesa variety of GPS products. This paper analyzes the development status ofdomestic and foreign vehicle navigation system at present, the GPS vehicle navigation system was discussed, to construct the hardware system based on embedded development board as the core, build of the vehicle navigation systembased on WinCE, using EVC and eSuperMap tool software, design of intelligent navigation system the electronic navigation maproute search.

Style APA, Harvard, Vancouver, ISO itp.

49

He, Ping, Ying Li, Meng Wang i Chao Liu. "Design of Automatic Milking Controller". Applied Mechanics and Materials 599-601 (sierpień 2014): 887–91. http://dx.doi.org/10.4028/www.scientific.net/amm.599-601.887.

Pełny tekst źródła

Streszczenie:

Milking machine automatic control is not only an important part for dairy farm to achieve of digital management, but also one of the key development of animal husbandry. Milking machine automatic control can improve production efficiency of dairy farm and quality of raw milk. First, the need of the milking factory is known, and an automatic control requirement is developed. Secondly, an AVR microcontroller core AT90CAN128 of ATMEL, used as the centre of the controller. And then, the hardware system is designed in several modules. In the last, the software of the controller is designed in detail based on certain need. The project uses the research method of combination of experimetal research, analytical studies and lessons learned. First the paper designs the hardware circuit board and the software development of the milking machine controller. Then through debugging of the physical machine, the paper implements the function of milking automatically and cleaning automatically. The results has reached the milk production expectations, and achieved good effects.

Style APA, Harvard, Vancouver, ISO itp.

50

Namioka, Yasuo, Teruhiko Hoshino, Toshifumi Kuri i Wataru Fukushima. "Automatic Design for Power Systems". IEEJ Transactions on Electronics, Information and Systems 120, nr 12 (2000): 1957–65. http://dx.doi.org/10.1541/ieejeiss1987.120.12_1957.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!