Zaloguj się

Gotowe bibliografie tematyczne / AUTO-PARTS MANUFACTURING / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: AUTO-PARTS MANUFACTURING.

Artykuły w czasopismach na temat „AUTO-PARTS MANUFACTURING”

Autor: Grafiati

Data publikacji: 11 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „AUTO-PARTS MANUFACTURING”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Yang, Xuchang, Qian Zheng, Yueying Hu, Ronghui Chen, Xuepeng Wang i Yanan Liu. "Research on High-Quality Development of Auto Parts Manufacturing Industry Based on Machine Learning Model". Scientific Programming 2022 (10.02.2022): 1–9. http://dx.doi.org/10.1155/2022/3659742.

Pełny tekst źródła

Streszczenie:

At present, in China’s automobile manufacturing industry, the main problem is the manufacturing of parts and on-board equipment. Most domestic industries still adopt the step-by-step production of parts, and each manufacturer customizes the required parts according to the scale and production needs of its own enterprise. This situation is easy to cause unstable quality of parts and serious unqualified quality inspection problems. Based on the above situation, we study the high-quality development, parts quality optimization, and remanufacturing of auto parts manufacturing industry with the support of machine learning model. Firstly, based on the analysis of auto parts procurement and production mode, this paper briefly describes the basic problems in the manufacturing process of auto parts in China. Machine learning technology is used to count the changes of quality data in manufacturing, and the quality standard is reflected in the learning model. The machine learning algorithm is used to diagnose and analyze the faults of auto parts and equipment, so as to turn high-quality production to high-quality production. The projection feature extraction algorithm is used to quantitatively analyze the low quality state of automobile parts. Finally, 3D printing technology is used to solve the quality manufacturing problem of parts with high-precision requirements, and the later materials are processed again to achieve the purpose of remanufacturing planning. The results show that the transformation of auto parts manufacturing to high quality can improve the economic development of the auto industry and meet the needs of modern society. The data analysis of parts controlled by machine learning model can help the precision manufacturing of automobile parts.

Style APA, Harvard, Vancouver, ISO itp.

2

Singh, Harwinder, i Amandeep Singh. "Application of lean manufacturing using value stream mapping in an auto‐parts manufacturing unit". Journal of Advances in Management Research 10, nr 1 (17.05.2013): 72–84. http://dx.doi.org/10.1108/09727981311327776.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

M.Elangovan i Dr. K.Ramasamy. "An Analytical Study on Ratios Influencing Profitability of Selected Indian Automobile Players". International Journal of Engineering and Management Research 12, nr 3 (14.06.2022): 102–7. http://dx.doi.org/10.31033/ijemr.12.3.14.

Pełny tekst źródła

Streszczenie:

Every country with a well-developed transportation network has a well-developed economy. The automobile industry is a critical engine of the nation's economic development. The automobile industry has significant backward and forward links with every area of the economy, as well as a strong and progressive multiplier impact. The automotive industry and the auto component industry are both included in the vehicle industry. It includes passenger waggons, light, medium, and heavy commercial vehicles, as well as multi-utility vehicles such as jeeps, three-wheelers, military vehicles, motorcycles, tractors, and auto-components such as engine parts, batteries, drive transmission parts, electrical, suspension and chassis parts, and body and other parts. In the last several years, India's automobile sector has seen incredible growth in sales, production, innovation, and exports. India's car industry has emerged as one of the best in the world, and the auto-ancillary sector is poised to assist the vehicle sector's expansion. Vehicle manufacturers and auto-parts manufacturers account for a significant component of global motorised manufacturing. Vehicle manufacturers from across the world are keeping a close eye on the Indian auto sector in order to assess future demand and establish India as a global manufacturing base. The current research focuses on three automotive behemoths: TATA Motors, MRF, and Mahindra & Mahindra.

Style APA, Harvard, Vancouver, ISO itp.

4

Manzoor, Abdul, Mukund Janardhanan, Marina Marinelli i Izabela Nielsen. "Prioritization of sharing economy barriers in British auto parts manufacturing SMEs". IFAC-PapersOnLine 55, nr 2 (2022): 229–34. http://dx.doi.org/10.1016/j.ifacol.2022.04.198.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Krishnamoorthy, K., i R. Vijayapriya. "Evaluation of financial soundness of Indian auto Ancillary industries using Altman Z-rate model". Accounting 9, nr 2 (2023): 67–72. http://dx.doi.org/10.5267/j.ac.2023.1.002.

Pełny tekst źródła

Streszczenie:

The automobile industry is an obvious indication of a country's economic development. Because it requires high performance and quality parts, it is also an innovation and comprehension intensive sector. Because of its deep forward and backward links with many key segments of the economy, the automobile sector is also prominent in India. Because of the strong supply support provided by various auto ancillary manufacturing companies, this sector has a strong multiplier effect and has the potential to be a driver of economic growth. The auto ancillary market is focused on the production and sale of transitional equipment and automotive parts used in the manufacture of automobiles. It is an important part of India's automotive industry. Such industries allow vehicle manufacturers to concentrate on their core competencies. The auto ancillary manufacturing Industry, with its high growth prospects, is one of the emerging industries in Indian markets. The Altman Z rating is a beneficial expedient for identifying a company's economic resilience and the probability of insolvency. The Z rating method was once used in this to find out to check the economic fitness of Indian auto ancillary manufacturing companies. The economic facts of 10 auto ancillary manufacturing companies listed groups on the National Stock Exchange (NSE) have been used to study each unique and rising market Altman Z rating formulae. The findings point out that not all the enterprises listed on the NSE are financially healthy. According to the study, some of the Indian auto ancillary manufacturing companies are sound and dependable without few companies, and some of the auto ancillary manufacturing companies are not likely to face monetary misery or insolvency soon.

Style APA, Harvard, Vancouver, ISO itp.

6

Xia, Yong Qing, i Gong Liang Zheng. "Research on Auto Cover Drawing Die Design BASED on NX". Applied Mechanics and Materials 394 (wrzesień 2013): 521–25. http://dx.doi.org/10.4028/www.scientific.net/amm.394.521.

Pełny tekst źródła

Streszczenie:

According to characters of auto covering parts such as large size, thin thickness, complexity in shape, low degree of standardization and expressed by model, etc. This paper put forward the drawing die design process of auto covering parts based on NX software. The assembly drawing of the auto covering part drawing die was shown in detail. In accordance to the mold design process, the digitized model was parametrically designed. The competitiveness of the auto covering part mold manufacturing enterprises was significantly improved with the application of 3D mold dynamic simulation s and automatic forming line simulation.

Style APA, Harvard, Vancouver, ISO itp.

7

Lucato, Wagner Cezar, Milton Vieira Júnior, Rosangela Maria Vanalle i José Antonio Arantes Salles. "Model to measure the degree of competitiveness for auto parts manufacturing companies". International Journal of Production Research 50, nr 19 (październik 2012): 5508–22. http://dx.doi.org/10.1080/00207543.2011.643252.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Wang, Zhen, Nachiappan Subramanian, Angappa Gunasekaran, Muhammad D. Abdulrahman i Chang Liu. "Composite sustainable manufacturing practice and performance framework: Chinese auto-parts suppliers׳ perspective". International Journal of Production Economics 170 (grudzień 2015): 219–33. http://dx.doi.org/10.1016/j.ijpe.2015.09.035.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Xin, Jianghui. "Evaluation of auto parts remanufacturing by grey cluster model". Grey Systems: Theory and Application 6, nr 3 (7.11.2016): 296–308. http://dx.doi.org/10.1108/gs-08-2016-0022.

Pełny tekst źródła

Streszczenie:

Purpose With the improvement of economic level, car ownership is growing, and the number of scrapped automobiles is increasing. Therefore, evaluation research for auto parts remanufacturing is particularly important. The purpose of this paper is to construct the evaluation index system of auto parts remanufacturing and research the grey clustering theory. The grey fixed weight clustering evaluation is used to evaluate automobile engine remanufacturability. Design/methodology/approach According to the policies and regulations of China about remanufacturing, economic, technical, resources, energy and the environment, four indexes are selected to set up the evaluation standard of auto parts remanufacturing scheme. Grey fixed weight clustering method is used to evaluate remanufacturability of the auto parts. Firstly, number index and grey determine the whitenization weight function, then based on the clustering weight of each index, the clustering coefficient matrix is calculated. Finally, the class that certain object belongs to, according to the clustering coefficient matrix is determined. Findings Results show that constructed indexes of auto parts remanufacturing scheme can be used for effective evaluation. And the proposed fixed weight grey cluster model can aggregate all indexes information well. Therefore, the proposed indexes and model in this paper are effective and can be used for auto parts remanufacturing. Practical implications According to the requirements of the current situation in China, this paper puts forward a method based on grey clustering decision, to evaluate different auto parts remanufacturing schemes, for manufacturing enterprises to provide theoretical basis for remanufacturing production, in order to realize the reasonable configuration of resources. Originality/value This paper firstly establishes the evaluation index system of auto parts remanufacturing, the grey clustering theory is introduced into the evaluation of remanufacturing. The fixed-weight grey cluster model is proposed to aggregate indexes’ information.

Style APA, Harvard, Vancouver, ISO itp.

10

Wattanakomol, Sunee, i Thanin Silpcharu. "Second-order confirmatory factor analysis of auto parts manufacturing industry management guidelines for sustainable success". Uncertain Supply Chain Management 10, nr 3 (2022): 905–12. http://dx.doi.org/10.5267/j.uscm.2022.3.004.

Pełny tekst źródła

Streszczenie:

Due to the slowdown of the world economy, the growth of the world's automobile manufacturing industry has declined. As a result, the production rate of automotive parts tends to decrease as well. The objective of this study was to investigate the guidelines for managing the automotive parts manufacturing for sustainable success. The study was conducted qualitatively and quantitatively. The results of the study revealed four components of the management of the automotive parts manufacturing industry; namely, 1) development of servitization, 2) development of organization, 3) development of labor skill, and 4) development of technology. As for the analysis of the second-order confirmatory factor model developed, it was found that the model passed the assessment criteria and was consistent with the empirical data.

Style APA, Harvard, Vancouver, ISO itp.

11

Yang, Hong, i Jian Zhang. "Research on Driving Factors of Green Innovation in China’s Auto Parts Manufacturing Enterprises". Advanced Materials Research 805-806 (wrzesień 2013): 1685–91. http://dx.doi.org/10.4028/www.scientific.net/amr.805-806.1685.

Pełny tekst źródła

Streszczenie:

With the green innovation has become the inevitable trend of enterprise development, this paper analyzed the main drivers of green innovation in Chinas auto parts manufacturing enterprises. Through the factor analysis method and regression method, using survey research for the study, we drew contribution of each driver of green innovation, and on the basis of quantitative analysis, put forward the corresponding improvement countermeasures.

Style APA, Harvard, Vancouver, ISO itp.

12

ElMaraghy, Hoda A., i Tarek AlGeddawy. "Co-evolution of products and manufacturing capabilities and application in auto-parts assembly". Flexible Services and Manufacturing Journal 24, nr 2 (17.03.2011): 142–70. http://dx.doi.org/10.1007/s10696-011-9088-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Adham, Babak, Mohammad Reza Komari Alaei i Reza Rostamzadeh. "Evaluating of Suppliers Selection in Auto Parts Manufacturing Company using DEMATEL and TOPSIS". International Journal of Business Performance Management 1, nr 1 (2024): 1. http://dx.doi.org/10.1504/ijbpm.2024.10052721.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Dhiravidamani, P., A. S. Ramkumar, S. G. Ponnambalam i Nachiappan Subramanian. "Implementation of lean manufacturing and lean audit system in an auto parts manufacturing industry – an industrial case study". International Journal of Computer Integrated Manufacturing 31, nr 6 (28.07.2017): 579–94. http://dx.doi.org/10.1080/0951192x.2017.1356473.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Carvalho Cleginaldo Pereira de i Reis Bruno dos. "The lean manufacturing system applied to an auto parts industry in the heavy vehicles segment". Global Journal of Engineering and Technology Advances 7, nr 2 (30.05.2021): 037–49. http://dx.doi.org/10.30574/gjeta.2021.7.1.0067.

Pełny tekst źródła

Streszczenie:

This paper aims to demonstrate how the adoption of a continuous improvement program, based on lean manufacturing tools, can benefit the production of automotive filters for heavy vehicles, considering improved productivity and reduced operational waste, with a consequent increase in effectiveness and cost reduction. In this study we used the lean manufacturing tools, mainly kaizen and value stream mapping. During its development, the application of a kaizen project in a production line of automotive filters for heavy vehicles, aimed obtaining increased productivity and better distribution of physical space, through the reduction of rework time, reduction of downtime due to maintenance and reduction of setup time. The use of lean manufacturing tools, through the instruments presented in this study, guaranteed the viability of improvements in the productive sector. This work allowed the observation of a consistent improvement in production capacity, with productivity increase, through the improvement of the operational time and reduction of time of waste. The best distribution of physical space and the best arrangement of items used by the production process were also achieved through the consolidation of two production lines.

Style APA, Harvard, Vancouver, ISO itp.

16

Antamba, Jaime, Vladimir Azanza, Gorky Reyes, Álvaro Remache i Soraya Ruiz. "Manufacture material characteristic analysis of original and alternative auto parts. Case Study: Brake Disc". Enfoque UTE 11, nr 3 (1.07.2020): 102–10. http://dx.doi.org/10.29019/enfoqueute.v11n3.631.

Pełny tekst źródła

Streszczenie:

All powered vehicles have a braking system adopted according to the type of vehicle and work for which they are designed. In Ecuador, there is a great variety of auto parts that are proposed as alternative replacement, varying in cost and quality. This research aims to quantitatively analyze the characteristics of the brake disc material between original and alternate auto parts. This research analyzes three brake disc samples (A, B, C) from different manufacturing sources, using the ASTM E415-08 spectrometry test and the metallography test under the ASTM A247-16A standard. The spectrometry detects 15 elements in each sample, the carbon equivalent of sample A is 18% and 20% higher in relation to sample B and C, which significantly influences the microstructure. The metallographic tests indicate a pearlitic matrix in each sample, however, there is a different distribution and size of the graphite flakes. According to the SAE J431 standard, each auto part meets the material conditions for the brake disc function.

Style APA, Harvard, Vancouver, ISO itp.

17

Lee, Daehee, Hyunseung Choo i Jongpil Jeong. "Anomaly Detection based on 1D-CNN-LSTM Auto-Encoder for Bearing Data". WSEAS TRANSACTIONS ON INFORMATION SCIENCE AND APPLICATIONS 20 (9.01.2023): 1–6. http://dx.doi.org/10.37394/23209.2023.20.1.

Pełny tekst źródła

Streszczenie:

The manufacturing industry is developing rapidly due to the Fourth Industrial Revolution. If a piece of bearing equipment, which is one of the essential parts of the manufacturing industry, fails, it will hinder the production of the manufacturing industry, which will lead to huge losses for the company. To prevent this, this paper implements a 1 Dimension-Convolution Neural Networks-Long Short-Term Memory (1D-CNN-LSTM) Auto-Encoder model for fault diagnosis of bearing data. The 1D-CNN-LSTM Auto-Encoder model showed high accuracy of 58 to 100 percent for eccentric bearing data that are difficult to visually diagnose as faults. In the future, we would like to extend this to a real-time failure diagnosis system that can remotely monitor the condition of the bearing equipment through real-time communication with the cloud server and test bed.

Style APA, Harvard, Vancouver, ISO itp.

18

Kosowatz, John. "Supply Chain Kinks". Mechanical Engineering 144, nr 4 (25.07.2022): 28–33. http://dx.doi.org/10.1115/1.2022-jul1.

Pełny tekst źródła

Streszczenie:

Abstract GM, Ford, and other automakers are chasing Tesla in the manufacture and marketing of electric vehicles. In turn this is sparking an upheaval the auto industry has not seen since Henry Ford’s Model T, which introduced manufacturing to the assembly line, and its effects are roiling the parts supply industry.

Style APA, Harvard, Vancouver, ISO itp.

19

Zhang, Jian, Chaoqiong Luo i Liping Wang. "Evaluation of automobile parts design scheme for intelligent manufacturing". Journal of Computational Methods in Sciences and Engineering 22, nr 1 (26.01.2022): 175–87. http://dx.doi.org/10.3233/jcm-215878.

Pełny tekst źródła

Streszczenie:

Aiming at the selection of modern auto parts design schemes, an evaluation method of automobile parts design scheme for intelligent manufacturing is proposed. Considered the environment-friendly factors and traditional manufacturing factors, the evaluation index system of automobile parts design scheme was established, which taken technology, environment, economy and quality reliability as the first level evaluation index, and 12 second level indexes under the first level index. The game theory method was used to comprehensively consider the proportion of subjective and objective weights to determine the composite weight of each index. Aimed at the certainty and uncertainty of the evaluation index, the set pair analysis relative closeness method was used to calculate the composite weight and established the model. Three sets of automobile panel design schemes of a company were selected, and the mathematical model was used to calculate them. With the help of C language program, the advantages and disadvantages of the three design schemes were evaluated, and the optimal scheme was obtained. The calculation example proves that the method is true and effective, conforms to the background of modern intelligent manufacturing, and the calculation is simple, and has good feasibility and practicability.

Style APA, Harvard, Vancouver, ISO itp.

20

Cao, W. J., i D. J. Hu. "Study of CNC Machining Auto-Programming Technology Based on Design/Manufacturing Feature". Materials Science Forum 626-627 (sierpień 2009): 657–62. http://dx.doi.org/10.4028/www.scientific.net/msf.626-627.657.

Pełny tekst źródła

Streszczenie:

DM feature based CNC machining automatic programming technology for rotational parts is studied. Dividing part hierarchy and feature hierarchy analysis method is put forward in CNC machining auto-programming. Algorithms about how to realize feature hierarchy or part hierarchy automatic programming cutting are given such as transverse, lengthways, isometric and concave profile machining cycles. An innovative Boolean calculation interference flag method is used in turning isometric algorithm. One-to-one mapping of creating tool pathways algorithm to machining process step is expediently to get diversiform machining project from part profiles.

Style APA, Harvard, Vancouver, ISO itp.

21

Shojaie, Amir Abbas, i Elahe Kahedi. "Auto parts manufacturing quality assessment using design for six sigma (DFSS), case study in ISACO company". International Journal of System Assurance Engineering and Management 10, nr 1 (11.09.2018): 35–43. http://dx.doi.org/10.1007/s13198-018-0745-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

MATSUMOTO, Shimpei, Koji OKUHARA, Nobuyuki UENO i Hiroaki ISHII. "Proposal of Heuristic Algorithm for Scheduling of Print Process in Auto Parts Supplier". JSME International Journal Series C 48, nr 1 (2005): 8–14. http://dx.doi.org/10.1299/jsmec.48.8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Valdez-de la Rosa, Luz María, Luis Alberto Villarreal-Villarreal i Gustavo Alarcón-Martínez. "Quality and innovation as drivers for manufacturing competitiveness of automotive parts suppliers". TQM Journal ahead-of-print, ahead-of-print (25.02.2020): 00. http://dx.doi.org/10.1108/tqm-12-2018-0218.

Pełny tekst źródła

Streszczenie:

PurposeThe purpose of this paper is to identify the causal relationship between the independent variables such as process quality and product innovation in regard to the dependent variable of competitiveness, in the manufacturing sector of the automotive industry, specifically for Tier 1 auto parts manufacturing companies in the state of Nuevo León, México.Design/methodology/approachBased on a thorough review of the literature, an instrument was designed to measure the competitiveness of automotive industry manufacturing; it was applied to Tier 1 suppliers of automotive parts in the state of Nuevo León, México. Various statistical analysis tests were applied to the results; first, Cronbach's alpha to determine the reliability of the instrument, and next, a factor analysis to measure construct validity. In addition, a multiple linear regression analysis was carried out to identify the causal relationships between the variables analysed.FindingsThis study found that process quality as well as product innovation have independent and positive causal relationships with respect to competitiveness in automotive manufacturing.Research limitations/implicationsThe limitations of this paper are its focus on a single manufacturing sector, application in a single country and small sample size.Practical implicationsCompanies that supply automotive parts will be able to invest in the key elements of quality and innovation while focusing their efforts on reinforcing their competitiveness.Originality/valueAuto parts suppliers will be able to perform specific actions to improve their quality processes through lean manufacturing and quality assurance practices and by designing new and innovative products that will enhance their competitiveness.

Style APA, Harvard, Vancouver, ISO itp.

24

Yu, Shui. "Satisfaction Measurement of the Automobile Manufacturing Suppliers Based on Fuzzy Comprehensive Evaluation". Advanced Materials Research 706-708 (czerwiec 2013): 2035–43. http://dx.doi.org/10.4028/www.scientific.net/amr.706-708.2035.

Pełny tekst źródła

Streszczenie:

With the economic globalization and knowledge economy advent, the enterprises hope achieve a favorable position in the competitive market, and gain more and more attention to long-term strategic cooperative relations with partners. Fully understanding the basis of supplier management theory, the paper developed a set of supplier satisfaction evaluation index system. Combined with the actual situation of the auto parts maker SH, some comments and suggestions related to supplier management are provided for SH. This will help the supplier management and expand the market coverage to the case, and provide additional research areas of supply chain partner satisfaction.

Style APA, Harvard, Vancouver, ISO itp.

25

Dhiravidamani, P., i A. S. Ram Kumar. "Sustainability of Green Environment though Lean Tool Implementation in Auto Parts Manufacturing Industry – An Industrial Case Study". Asian Journal of Research in Social Sciences and Humanities 6, nr 7 (2016): 2069. http://dx.doi.org/10.5958/2249-7315.2016.00565.7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Ahmad, Yasir, i Danial Saeed Pirzada. "Using Analytic Hierarchy Process for Exploring Prioritization of Functional Strategies in Auto Parts Manufacturing SMEs of Pakistan". SAGE Open 4, nr 4 (10.11.2014): 215824401455356. http://dx.doi.org/10.1177/2158244014553560.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Ishii, Kei. "Application of High Performance and High Characteristics Sinterng Material to Auto Parts". Journal of the Japan Society of Powder and Powder Metallurgy 58, nr 6 (2011): 342. http://dx.doi.org/10.2497/jjspm.58.342.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Kumar, Akhilesh, Ratna Babu Chinnam i Alper Murat. "Hazard rate models for core return modeling in auto parts remanufacturing". International Journal of Production Economics 183 (styczeń 2017): 354–61. http://dx.doi.org/10.1016/j.ijpe.2016.07.002.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Xu, Shen, Xu Wang i Lifeng Ma. "A brief analysis of introducing curriculum ideological and political elements into "Mapping Practice of Auto Parts"". International Journal for Innovation Education and Research 11, nr 1 (1.01.2023): 1–7. http://dx.doi.org/10.31686/ijier.vol11.iss1.4041.

Pełny tekst źródła

Streszczenie:

The article focuses on the new requirements of integrating curriculum ideological and political elements into the professional practice course of "Automotive Parts Mapping Practice", proposes feasible curriculum ideological and political elements, establishes the course teaching concept of ideological and political element integration, and discusses the new teaching mode different from the traditional practice course, striving to integrate professional knowledge education, ideological and political education, and students' practical ability training. The course aims to integrate professional knowledge education, ideological and political education and the cultivation of students' practical skills, and comprehensively promote the construction of the teaching content, curriculum system, teaching methods, teaching means, teaching conditions and teaching staff of Mapping Practice of Auto Parts, so as to lay a solid practical foundation for the revitalization of Chinese automotive industry and the cultivation of China's own manufacturing technology engineers for the first line of automotive production.

Style APA, Harvard, Vancouver, ISO itp.

30

Soranso, Lígia Martinez, Jorge Luis Faria Meirelles i Nara Rossetti. "Application of Lean Accounting for production costs management in lean enterprises: a case study in an auto parts company". South Florida Journal of Development 3, nr 4 (19.08.2022): 5455–66. http://dx.doi.org/10.46932/sfjdv3n4-109.

Pełny tekst źródła

Streszczenie:

The main purpose of this study is to analyse and to compare how the lean manufacturing changes, applied in the production system, are reflected in company´s financial reports. This case study practically compares the traditional accounting reports with the ones purposed by the Lean Accounting (LA) methodology version. The motivation of this case study started with the statement of unit managers of a Lean Manufacturing (LM) company, here called “lean enterprise”. They said that one of the greatest challenges, after the modifications in the production system, is the financial demonstration in costs reports. After change the production system from “push” to “pull”, the main structure for a cost per unit calculation and fix cost “dilution” are ruined. There is no mass production anymore, “the more, the better” philosophy does not lasts and the encountered results corroborate with the literature in regarding of the need of adapting the cost controlling system in Lean Enterprises.

Style APA, Harvard, Vancouver, ISO itp.

31

Torres, Luis Fernando, Izabela Simon Rampasso, Osvaldo Luiz Gonçalves Quelhas, Walter Leal Filho, Vitor William Batista Martins i Rosley Anholon. "Difficulties observed during lean tools training: insights for leaders". Revista de Administração da UFSM 14, nr 4 (9.11.2021): 735–49. http://dx.doi.org/10.5902/1983465963914.

Pełny tekst źródła

Streszczenie:

Purpose: The lean manufacturing can be an important ally of companies to enhance their competitiveness, since it can support companies to eliminate wastes and continuously improve their processes. In this context, the main purpose of this study was to analyze difficulties observed by operational level employees of auto parts companies during lean tools training.Design/methodology/approach: A panel of specialists indicated 18 tools required for lean journey training. These tools were used to structure a questionnaire to perform a survey. The survey was conducted with 77 lean training experienced professionals from two auto parts companies. Data collected was analyzed through descriptive statistics and Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), to rank the tools according to the difficulty levels observed by the respondents.Findings: In general, operational level employees presented difficulties to understand the concepts of all analyzed tools. Comparatively, Lean Leadership and Constraints Management were those most difficult for them.Originality/value: The results present here can be used by leaders for providing lean training and for academics in futures studies.

Style APA, Harvard, Vancouver, ISO itp.

32

Mayur, R., i Baibhav Kumar. "Demand Forecasting of Spare Parts of Automobiles using Gaussian Support Vector Machine". IJOSTHE 6, nr 1 (10.02.2019): 4. http://dx.doi.org/10.24113/ojssports.v7i1.114.

Pełny tekst źródła

Streszczenie:

Reordering motor vehicle spare parts for the purposes of stock replenishment is an important function of the parts manager in the typical motor dealership. Meaningful reordering requires a reliable forecast of the future demand for items. Production planning and control in remanufacturing are more complex than those in traditional manufacturing. Developing a reliable forecasting process is the first step for optimization of the overall planning process. In remanufacturing, forecasting the timing of demands is one of the critical issues. The current article presents the result of examining the effectiveness of demand forecasting by time series analysis in auto parts remanufacturing. A variety of alternative forecasting techniques were evaluated for this purpose with the aim of selecting one optimal technique to be implemented in an automatic reordering module of a real time computerized inventory management system.

Style APA, Harvard, Vancouver, ISO itp.

33

Vieira, Jose, Maria Lucia Galves i Fabio Cardoso. "Deciding on inventory allocation policies in the auto parts Brazilian distribution chain". International Journal of Services and Operations Management 1, nr 1 (2020): 1. http://dx.doi.org/10.1504/ijsom.2020.10030937.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Sureeratta, Cheerawit, Kulkanya Napompech i Vinai Panjakhajo. "Model of Leadership and the Effect of Lean Manufacturing Practices on Firm Performance in Thailand’s Auto Parts Industry". Research Journal of Business Management 8, nr 2 (15.03.2014): 104–17. http://dx.doi.org/10.3923/rjbm.2014.104.117.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Oh, Keontaek, Hyun Seok Lee i DaeSoo Kim. "Analysis of the Working Capital Management Strategies of Global Auto Parts and Vehicle Manufacturing Industries in Changing Economies". Korean Production and Operations Management Society 32, nr 3 (30.08.2021): 299–315. http://dx.doi.org/10.32956/kopoms.2021.32.3.299.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Minghao, Zhu, Zhang Zhibo i Wu Xueqiao. "Analysis of Typical “Assembly-Components” Relationship Models in the Automobile Industry Chain". E3S Web of Conferences 292 (2021): 03046. http://dx.doi.org/10.1051/e3sconf/202129203046.

Pełny tekst źródła

Streszczenie:

The research object of this paper is the model of correlation between automobile manufacturers and auto parts manufacturers in major automobile manufacturing countries of the world. After first analyzing the characteristics, advantages and disadvantages of typical “assembly-components” relationship models in US (Ford model), Germany (Volkswagen model), Japan (Toyota model) and China (Geely model), this paper explores the degree of correlation between companies involved in these typical models, and in the end draws conclusions and points out the deficiencies of the research.

Style APA, Harvard, Vancouver, ISO itp.

37

Wysong, Bill, i Dan Heilman. "Innovative reverse osmosis system simplifies operation, saves costs for auto parts manufacturer". Metal Finishing 106, nr 11 (listopad 2008): 46. http://dx.doi.org/10.1016/s0026-0576(08)80310-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Nemeša, Ineta. "Hand stitch sewing machines for men suit manufacturing". Tekstilna industrija 70, nr 1 (2022): 37–41. http://dx.doi.org/10.5937/tekstind2201037n.

Pełny tekst źródła

Streszczenie:

Hand stitches seams along edges of lapels, collars and pocket flaps on a men jacket help to fix canvas interlining under face fabric, keep the edges flat and prevent them from rolling or curling. Traditionally hand stitches seams also indicate high quality of the suit. Real hand stitch machines imitate had stitch 209. Depending on the length of the top and bottom stitch parts the machines can create pick stitches, saddle stitches and other stitch patterns. One group of the machines create stitches by help of a hooked needle, other machines use a double pointed needle. The machines work with limited length threads, most often with 90 cm and 120 cm long ones. The hand stitch seams can to be sewn with special waxed silk threads or regular threads. To increase work productivity and quality the machines use manual or auto thread trimming devices, reverse stitch function, half stitch option, seam beginning and end securing, programmable stitch type, sewing speed, stitch length, thread trimming time.

Style APA, Harvard, Vancouver, ISO itp.

39

Pereira, Enderson Luiz, Miguel Ângelo Lellis Morreira, Carlos Francisco Simões Gomes, Marcos dos Santos, Arthur Pinheiro de Araújo Costa, Stephanye dos Santos Sbano Chagas, Igor Pinheiro de Araújo Costa i Emerson Hissao Kojima. "Supply Chain Management (SCM): an Analysis based on the CRITIC-GRA-3N Method in the selection of auto parts suppliers for an auto parts dealer in the city of Guaratinguetá". Procedia Computer Science 221 (2023): 402–9. http://dx.doi.org/10.1016/j.procs.2023.07.055.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Jo, Hyeon-Cheol, Jae-Yong Seo i Kyung-Hwan Park. "Prediction of rattle noise in steering gear system and analysis of contributing factors through neural networks using design and manufacturing data". INTER-NOISE and NOISE-CON Congress and Conference Proceedings 265, nr 5 (1.02.2023): 2092–99. http://dx.doi.org/10.3397/in_2022_0300.

Pełny tekst źródła

Streszczenie:

In a vehicle, rattle noise may occur when driving on bumpy roads due to clearance between parts of steering gear systems. The rattle noise is perceived by the drivers' ears and it can be the cause of a repair campaign. In order to reduce rattle noise, the dimensions of clearance between parts are optimally designed. Also, in the development stage, general auto parts companies manage rattle noise below a certain level. However, it is impossible to measure noise for all products at the production stage due to cost and time issues. In this paper, the noise prediction model using the neural network model for all products based on design factors and the data of manufacturing execution system was introduced. In addition, the main factors contributing to rattle noise were analyzed in the process of creating the model. By referring to the main factors contributing to noise, it helps in the design of the steering gear to reduce the rattle noise value.

Style APA, Harvard, Vancouver, ISO itp.

41

Maldonado-Guzmán, Gonzalo, Raymundo Juárez-del Toro i Víctor Manuel Molina-Morejón. "Exploring the Relationship Between Circular Economy Practices and Growth in Manufacturing SMEs". International Business Research 16, nr 7 (26.06.2023): 74. http://dx.doi.org/10.5539/ibr.v16n7p74.

Pełny tekst źródła

Streszczenie:

The circular economy has been acknowledged as key for manufacturing firms, wishing overcome challenges, particularly relates it to business growth. However, the transition to linear economy at circular economy has been slow in literature, particularly there are relatively few studies that have focused on the relationship of circular economy practices and growth of small and medium-sized manufacturing companies, for this reason this study's main objective is to fill this existing gap in the literature. In addition, a self-administered questionnaire was distributed to a sample of 400 companies in the automotive and auto parts industry in Mexico, analyzing the data set using confirmatory factor analysis and structural equation models. The results obtained follow that the circular economy has a significant positive impact on the growth level of small manufacturing firms in the automotive and autoparts industries.

Style APA, Harvard, Vancouver, ISO itp.

42

Pashkova, O., L. Nardid, E. Rudnieva i M. Zarubyna. "CHARACTERISTIC OF MODERN POLYMER MATERIALS AND THEIR APPLICATION IN THE AUTOMOTIVE INDUSTRY". Theory and Practice of Forensic Science and Criminalistics 21, nr 1 (15.12.2020): 388–410. http://dx.doi.org/10.32353/khrife.1.2020_27.

Pełny tekst źródła

Streszczenie:

The article describes the advantages of using modern polymer materials for the manufacture of auto parts in the automotive industry. The authors have developed and presented a systematization of modern polymer materials, which are most often used in the automotive industry for the manufacture of both body and engine compartment (under hood) parts, and parts for internal equipment of a car. The studies made it possible for the authors to introduce a characteristic of the modern polymer materials properties that could to be used for the manufacture of a particular car part, as well as indicate brief chemical names (abbreviations) of polymer materials and their compositions (taking into account the requirements of world practice), indicating some properties, namely: heating resistance, solubility in organic solvents, etc. It is indicated that the use of polymer materials in the automotive industry is based directly on the properties of the polymer material and the requirements for a particular auto part. In one of the tables, a list of polymer materials and parts that are made of a certain type of polymer material is outlined, in another table the information on feedback regarding the variation of polymer materials in the process of manufacturing a specific car part is gathered. Special attention is paid to the example of deciphering the stamp meaning, which is stamped on the inner surface of some polymer parts. The stamp reflects information on the type of polymer material from which the auto part is made, the presence of fillers and amplifiers in its composition, as well as their percentage. In addition, a list of the main types of modified polypropylene, a brief designations of polypropylene various modifications and their application in the automotive industry are presented. For the ease of use while forensic practice, the information on the properties and possibilities of using the most commonly used polymer materials in the automotive industry is summarized in table.

Style APA, Harvard, Vancouver, ISO itp.

43

Sun, Li Bo, Shun Sheng Guo, Yi Bing Li, Jun Guo i Si Qi Wu. "Application of Quality Early Warning System Base on Web Form Design". Advanced Materials Research 201-203 (luty 2011): 1553–57. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.1553.

Pełny tekst źródła

Streszczenie:

Aiming at the quality early warning problem of manufacturing process, this study develops a quality early warning system base on Web form design, combining some auto parts companies operating practice. In addition, it analyses the design principle and application methods of the system. It has been proved that the system achieves real-time monitoring, diagnosis, early warning to abnormal volatility, and prevents the defective products from occurrence and outflow, and gives corresponding diagnosis views to abnormal fluctuations according to historical data. It has been proved that this system is effective in practice.

Style APA, Harvard, Vancouver, ISO itp.

44

Cai-qi, Hu, Lin Zhong-qin i Lai Xin-min. "Concept design of checking fixture for auto-body parts based on neural networks". International Journal of Advanced Manufacturing Technology 30, nr 5-6 (10.11.2005): 574–77. http://dx.doi.org/10.1007/s00170-005-0039-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Bao, Yi Dong, i Hoon Huh. "Optimum design of trimming line by one-step analysis for auto body parts". Journal of Materials Processing Technology 187-188 (czerwiec 2007): 108–12. http://dx.doi.org/10.1016/j.jmatprotec.2006.11.061.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Torres-Alba, Abelardo, Jorge Manuel Mercado-Colmenero, Juan de Dios Caballero-Garcia i Cristina Martin-Doñate. "Application of New Conformal Cooling Layouts to the Green Injection Molding of Complex Slender Polymeric Parts with High Dimensional Specifications". Polymers 15, nr 3 (21.01.2023): 558. http://dx.doi.org/10.3390/polym15030558.

Pełny tekst źródła

Streszczenie:

Eliminating warpage in injection molded polymeric parts is one of the most important problems in the injection molding industry today. This situation is critical in geometries that are particularly susceptible to warping due to their geometric features, and this occurs with topologies of great length and slenderness with high changes in thickness. These features are, in these special geometries, impossible to manufacture with traditional technologies to meet the dimensional and sustainable requirements of the industry. This paper presents an innovative green conformal cooling system that is specifically designed for parts with slender geometric shapes that are highly susceptible to warping. Additionally, the work presented by the authors investigates the importance of using highly conductive inserts made of steel alloys in combination with the use of additively manufactured conformal channels for reducing influential parameters, such as warpage, cooling time, and residual stresses in the complex manufacturing of long and slender parts. The results of this real industrial case study indicated that the use of conformal cooling layouts decreased the cycle time by 175.1 s—66% below the current cooling time; the temperature gradient by 78.5%—specifically, 18.16 ºC; the residual stress by 39.78 MPa—or 81.88 %; and the warpage by 6.9 mm—or 90.5%. In this way, it was possible to achieve a final warping in the complex geometry studied of 0.72 mm, which was under the maximum value required at the industrial level of 1 mm. The resulting values obtained by the researchers present a turning point from which the manufacturing and sustainability in the injection molding of said plastic geometries is possible, and they take into account that the geometric manufacturing features analyzed will present a great demand in the coming years in the auto parts manufacturing industry.

Style APA, Harvard, Vancouver, ISO itp.

47

Yeetsorn, Rungsima, Thitinun Ungtrakul, Kotchaporn Jariyakun, Walaiporn Prissanaroon-Ouajai i Costas Tzoganakis. "Thermoplastic Vulcanizates/Recycled Polypropylene Blend for Automotive OEM". Key Engineering Materials 757 (październik 2017): 29–34. http://dx.doi.org/10.4028/www.scientific.net/kem.757.29.

Pełny tekst źródła

Streszczenie:

An original equipment market (OEM) in Thailand mainly imports thermoplastic vulcanizates (TPV) from abroad that leads to a high manufacturing cost. To reduce the cost and to create value-added products from a plastic scrap, therefore, this research aim is to observe a possibility of using TPV and recycled polypropylene (rPP) blends as a raw material for OEM. The blends with various rPP loadings were successfully prepared through a traditional twin-screw extruder. Proportions between TPV and rPP were adjusted to determine the optimal flow and mechanical properties for productions of different auto parts. The blends were tested for studying rheology and mechanical properties: tensile; hardness; flexural; and creep behavior. All tests resulted in discussions about the feasibility of using TPV/rPP blends with respect to auto part specifications in real applications. Test results suggested that the TPV/rPP blends meet the requirements of specific automotive applications. Thermal property and morphological analysis were also carried out to have more understanding about changes in mechanical properties.

Style APA, Harvard, Vancouver, ISO itp.

48

Rahman, Muhammad Arifur, i Sally Cahyati. "Employing a Decision Support System (DSS) application system to modify a non-standard wall-mounting electrical panel using a 3D CAD modelling". SINERGI 26, nr 2 (15.06.2022): 193. http://dx.doi.org/10.22441/sinergi.2022.2.008.

Pełny tekst źródła

Streszczenie:

Flexibility in the design process becomes an absolute necessity in a smart factory in the era of industrial manufacturing 4.0. CAD technology with a 3D modeling capability serves as a backbone in the design process in a manufacturing industry. Here, iLogic serving as an add-on of Inventor software will be combined with a Decision Support System (DSS) to build a DSS application system, namely "Panel Auto System". This system will help an engineer modify a 3D model wall-mounting panel to fulfill a non-standard order from his or her customers. This 3D-model database from various parts of the wall-mounting panel is generated from the 3D modeling. Then, by employing the if/then/else rules in the iLogic, the system can modify a 3D model wall-mounting panel data standard and serves as a geometric 3D model based on the customer’s order. The system works well and has been validated. The efficiency of the modeling process using the "Panel Auto System" increases its time efficiency up to 97,6 % compared to a manual process. Therefore, this system can increase the engineer’s productivity in the design of an in-wall mounting panel, and the customers can get the order of their 3D model faster.

Style APA, Harvard, Vancouver, ISO itp.

49

Xing, Yanfeng, Fang Wang, Jingjing Lu i Sha Xu. "Welding deformation analysis of aluminum alloy and steel sheet metal parts based on resistance spot welding". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, nr 3 (6.02.2018): 797–806. http://dx.doi.org/10.1177/0954405418755819.

Pełny tekst źródła

Streszczenie:

Auto-body lightweight is becoming an important trend of energy saving and emission reduction. Various materials assembled together would be used to fabricate the auto-body to satisfy this demand. However, the assembly dimensional quality is difficult to be controlled in the real processing due to the huge differences in material properties. Therefore, it is necessary to control and analyze the welding deformation of aluminum alloy and steel. In this work, the orthogonal design experiment has been adopted to analyze the welding deformation of steel–aluminum sheet parts. Subsequently, the response surface model is proposed to establish the relationship between welding deformation and welding parameters by finite element analysis, which is verified by physical experiments again. Meanwhile, the anti-deformation method is also used to decrease the assembly deformation successfully. And the case of Z-shaped planes is applied to further illustrate the proposed method of this work. Finally, the results show that both the methods have a good simulation effect and a high prediction accuracy for the assembly dimensional quality.

Style APA, Harvard, Vancouver, ISO itp.

50

Fu, Hsin-Pin, Tien-Hsiang Chang i Wen-Hsiung Wu. "An implementation model of an e-Procurement system for auto parts: a case study". Production Planning & Control 15, nr 7 (październik 2004): 662–70. http://dx.doi.org/10.1080/09537280412331298201.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!