Gotowa bibliografia na temat „Austenitic cast steel”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Austenitic cast steel”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Austenitic cast steel"
Pietrowski, S. "Wearing Quality of Austenitic, Duplex Cast Steel, Gray and Spheroidal Graphite Iron". Archives of Foundry Engineering 12, nr 2 (1.04.2012): 235–44. http://dx.doi.org/10.2478/v10266-012-0067-0.
Pełny tekst źródłaÇelik, G. Aktaş, Fulya Kahrıman, Ş. Hakan Atapek i Şeyda Polat. "Characterization of the high temperature oxidation behavior of iron based alloys used as exhaust manifolds". MATEC Web of Conferences 188 (2018): 02001. http://dx.doi.org/10.1051/matecconf/201818802001.
Pełny tekst źródłaKalandyk, B. "Microstructure and Abrasive Wear Resistance of 18Cr-4Ni-2.5Mo Cast Steel". Archives of Foundry Engineering 12, nr 4 (1.12.2012): 81–84. http://dx.doi.org/10.2478/v10266-012-0111-0.
Pełny tekst źródłaSakaki, Hayato, Masayuki Mizumoto, Takeshi Ohgai i Akio Kagawa. "New Application of High Niobium Cast Iron as a Grain Refiner for Stainless Steels". Key Engineering Materials 457 (grudzień 2010): 447–52. http://dx.doi.org/10.4028/www.scientific.net/kem.457.447.
Pełny tekst źródłaKalandyk, B., R. Zapała, Ł. Boroń i M. Solecka. "Impact Strength of Austenitic and Ferritic-Austenitic Cr-Ni Stainless Cast Steel in -40 and +20°C Temperature". Archives of Metallurgy and Materials 59, nr 3 (28.10.2014): 1103–6. http://dx.doi.org/10.2478/amm-2014-0190.
Pełny tekst źródłaBerezovsky, A. V., E. B. Votinova i A. S. Smolentsev. "The technology of arc welding of dissimilar steels". Diagnostics, Resource and Mechanics of materials and structures, nr 5 (październik 2023): 31–38. http://dx.doi.org/10.17804/2410-9908.2023.5.031-038.
Pełny tekst źródłaAftandiliants, Y. G. "The effect of heat treatment on the mechanical properties of modified stainless steels". Metaloznavstvo ta obrobka metalìv 102, nr 2 (30.06.2022): 45–51. http://dx.doi.org/10.15407/mom2022.02.045.
Pełny tekst źródłaSydorchuk, O. M. "Steel with control austenitic transformation during operation". Metaloznavstvo ta obrobka metalìv 98, nr 2 (7.06.2021): 47–53. http://dx.doi.org/10.15407/mom2021.02.047.
Pełny tekst źródłaStradomski, G. "The Analysis of AISI A3 Type Ferritic-Austenitic Cast Steel Crystallization Mechanism". Archives of Foundry Engineering 17, nr 3 (1.09.2017): 229–33. http://dx.doi.org/10.1515/afe-2017-0120.
Pełny tekst źródłaGarbiak, Małgorzata, i Bogdan Piekarski. "Phases in Austenitic Cast Steel". Defect and Diffusion Forum 326-328 (kwiecień 2012): 215–20. http://dx.doi.org/10.4028/www.scientific.net/ddf.326-328.215.
Pełny tekst źródłaRozprawy doktorskie na temat "Austenitic cast steel"
Woodward, Neil J. "Pool oscillations and cast variations : penetration control for orbital tig welding of austenitic stainless steel tubing". Thesis, Cranfield University, 1997. http://dspace.lib.cranfield.ac.uk/handle/1826/4512.
Pełny tekst źródłaPonížil, Ondřej. "Studium intermetalických fází v lité duplexní oceli". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400838.
Pełny tekst źródłaMolina, Griggs Alejandro José. "Laser Metal Powder Deposition of Austenitic Stainless Steel on Spheroidal Graphite Cast Iron : A corrosion resistant coating for the Food & Beverage Industry". Thesis, Högskolan Väst, Avdelningen för svetsteknologi (SV), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-13016.
Pełny tekst źródłaMoya, Alice. "High temperature corrosion in exhaust application for heavy-duty trucks". Thesis, KTH, Materialvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-259660.
Pełny tekst źródłaÖkad miljömedvetenhet har gjort att både industri och politiker har satt upp mål för att sänka koldioxidutsläppen. För transportbranschen innebär detta till exempel ökad motoreffektivitet, att fossila bränslen ersätts med biobaserade bränslen eller full elektrifiering. För tunga lastbilar är de två första alternativen de som är aktuella på kort och medellång sikt. Dessa alternativ innebär nya förhållanden för motorn; nämligen högre förbränningstemperatur och -tryck, vilket kommer att öka termisk och mekanisk last på motorn. Detta är särskilt tydligt för avgassystemet, eftersom det utsätts för termisk cykling vid normal drift. Avgassystemet i en tung lastbil är oftast gjort i gjutjärn och ibland i gjutstål. Gjutjärnen, t ex segjärn SiMo51, börjar nu närma sig sin maximala driftstemperatur och nya material behöver introduceras. Vid höga temperaturer oxiderar dessa metalliska material och bildar olika typer av oxidskal. Beroende på sammansättningen på oxidskalet, kan det fungera som skydd för underliggande material. Termisk cykling kan ge spänningar i oxidskiktet som i sin tur kan ge flagning av skiktet. Om flagningen fortsätter kontinuerligt, förbrukas dels material, men flagorna kan också ge skador nedströms i avgassystemet. I detta arbete undersöks fyra järnbaserade kandidatmaterial avseende högtemperaturkorrosion. Prover av två gjutjärn och två austenitiska rostfria gjutstål exponerades dels isotermt vid 850 °C och 900 °C i stillastående luft, dels i experiment med termisk cykling i en simulerad flödande avgasatmosfär och varm temperatur 850 °C. Dessutom användes termodynamisk programvara (Thermo-Calc/DICTRA) för att simulera termodynamik och kinetik. Resultaten visar att SiMo1000 bildar ett relativt tjockt, järnrikt oxidskikt med viss inre oxidation som verkar följa grafitstråk i materialet. Det andra gjutjärnet, segjärnet Ni-Resist, beter sig bättre än SiMo1000 och bildar krom och kiseldioxidlager som förhindrar intern oxidation. Viss flagning observerades i den cykliska exponeringen. 1.4832 visade ett sämre beteende än de andra materialen och bildade inget skyddande oxidskikt, utan visade kontinuerlig massförlust i samtliga exponeringar. Detta material är därför inte lämpligt för de undersökta högtemperaturmiljöerna. HK30 visade låg massförlust i samtliga undersökningar med oxidation i interdendritiska områden. Även gjutfel som t ex porer observerades idessa områden. Båda kan påverka materialets mekaniska egenskaper vid dessa temperaturer.
Meskine, Zeineb. "Modélisation de la tenue en fatigue à haute température d'aciers moulés austénitiques : Application au dimensionnement des turbocompresseurs". Electronic Thesis or Diss., Institut polytechnique de Paris, 2023. http://www.theses.fr/2023IPPAE002.
Pełny tekst źródłaTurbochargers, components of internal combustion engines, are commonly manufactured in austenitic stainless steel such as grade 1.4837. The respect of the regulations concerning the polluting emissions of the vehicles induce more and more severe thermomechanical loads which influence in particular the resistance to the low cycle fatigue of these parts. Fatigue criteria related to crack initiation lead to numerical analyses that are not consistent with the lifetimes measured in the test. This observation also applies to other parts of the automotive sector and the consideration of crack propagation becomes a major design issue. The aim here is then to propose a model including both the elements useful for the definition of a crack initiation in a fatigue framework under anisothermal conditions but also those necessary to describe the propagation of cracks under generalized viscoplastic conditions.After having detailed the industrial problem and the associated scientific topics, a metallurgical characterization is carried out on stainless steel 1.4837 where the chemical composition, the phases in presence and the size of grains are analysed, highlighting a coarse microstructure and an important dispersion of the Young's moduli. The existing criteria, in particular at Stellantis, are then analysed and the weaknesses as for the estimation of the number of cycles to initiation of the fatigue tests and the lifetimes of the industrial structure are identified. A reformulation of the criterion is then proposed by integrating first a dependence on the test temperature and then the mutual contribution of the plastic energy dissipated per stabilized cycle and the elastic opening energy, which allows to take into account the effects of closure and mean stress. Uniaxial crack propagation tests on notched specimens and under isothermal and anisothermal loads for a temperature range between 300 °C and 950 °C (calibrated according to those measured on turbochargers) are then conducted to analyse the crack propagation rates as a function of temperature, amplitude and loading ratio. For the steel considered, the cracks propagate in transgranular mode while the observed propagation paths are perpendicular to the direction of loading even if interactions between microstructure and cracks induce oscillations. The macroscopic and local closure effects related to cyclic viscoplasticity and temperature are finely analysed and the propagation curves are then established first in the simplified framework of linear fracture mechanics. They appear to be uncorrelated with the local microstructure of the studied material, underlining a good repeatability of the behaviour. An approach based on a micro-propagation law is then proposed to estimate the propagation rates from an energy formulation. This model has been validated for different loading levels and can be easily used in a industrial design process.Finally, The propagation curves are finally established in the more realistic framework of nonlinear fracture mechanics through finite element simulations and the G-Theta method in the Z-cracks tool. An in-depth study of the evolution of the driving forces of the propagation was carried out in order to evaluate the variation of the stress intensity factors and the size of the plastic zone as a function of the loading and the crack length. Special attention is given to the description of macroscopic and local crack closure with cyclic viscoplasticity and temperature. Finally, a test/calculation correlation study has allowed us to conclude on the relevance of all the results
Kejha, Richard. "Segregace při tuhnutí v austeniticko-feritických korozivzdorných ocelích". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401533.
Pełny tekst źródłaHeczko, Milan. "High Temperature Deformation Mechanisms". Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-391818.
Pełny tekst źródłaMalmberg, Andreas. "The influence of carbonitriding on hardness, retained austenite and residual stress in 52100 steel". Thesis, KTH, Materialvetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-173804.
Pełny tekst źródłaKim, Yoon-Jun. "Phase Transformations in Cast Duplex Stainless Steels". Ames, Iowa : Oak Ridge, Tenn. : Ames Laboratory ; distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2004. http://www.osti.gov/servlets/purl/837274-V0QAJQ/webviewable/.
Pełny tekst źródłaPublished through the Information Bridge: DOE Scientific and Technical Information. "IS-T 2322" Yoon-Jun Kim. US Department of Energy 12/19/2004. Report is also available in paper and microfiche from NTIS.
Lekganyane, Kedibone Melita. "Influence of primary cooling conditions and austenite conditioning on the hot ductility of simulated continuous cast peritectic steels". Diss., University of Pretoria, 2020. http://hdl.handle.net/2263/79600.
Pełny tekst źródłaDissertation (MSc)--University of Pretoria, 2020.
Materials Science and Metallurgical Engineering
MSc
Unrestricted
Książki na temat "Austenitic cast steel"
Leinonen, Jouko. Cast-To-Cast Variations In Weld Penetration In Austenitic Stainless Steels. Oulu: University of Oulu, 1987.
Znajdź pełny tekst źródłaParrish, Geoffrey. Carburizing. ASM International, 1999. http://dx.doi.org/10.31399/asm.tb.cmp.9781627083379.
Pełny tekst źródłaCzęści książek na temat "Austenitic cast steel"
Wu, Xijia, Guangchun Quan i Clayton Sloss. "Low Cycle Fatigue of Cast Austenitic Steel". W Fatigue and Fracture Test Planning, Test Data Acquisitions and Analysis, 37–57. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2017. http://dx.doi.org/10.1520/stp159820160030.
Pełny tekst źródłaMcCracken, Steven L., i Richard E. Smith. "Behavior and Hot Cracking Susceptibility of Filler Metal 52 M (ERNiCrFe-7A) Overlays on Cast Austenitic Stainless Steel Base Materials". W Hot Cracking Phenomena in Welds III, 333–52. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-16864-2_17.
Pełny tekst źródłaDurand-Charre, Madeleine. "The decomposition of austenite". W Microstructure of Steels and Cast Irons, 179–93. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-08729-9_9.
Pełny tekst źródłaChen, Y., C. Xu, X. Zhang, W. Y. Chen, J. S. Park, J. Almer, M. Li i in. "Microstructure and Deformation Behavior of Thermally Aged Cast Austenitic Stainless Steels". W The Minerals, Metals & Materials Series, 1841–57. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-030-04639-2_124.
Pełny tekst źródłaLach, Timothy G., i Thak Sang Byun. "Microstructural Evolution of Cast Austenitic Stainless Steels Under Accelerated Thermal Aging". W The Minerals, Metals & Materials Series, 1859–68. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-030-04639-2_125.
Pełny tekst źródłaChen, Y., C. Xu, X. Zhang, W. Y. Chen, J. S. Park, J. Almer, M. Li i in. "Microstructure and Deformation Behavior of Thermally Aged Cast Austenitic Stainless Steels". W The Minerals, Metals & Materials Series, 625–41. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-68454-3_48.
Pełny tekst źródłaLach, Timothy G., i Thak Sang Byun. "Microstructural Evolution of Cast Austenitic Stainless Steels Under Accelerated Thermal Aging". W The Minerals, Metals & Materials Series, 643–52. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-68454-3_49.
Pełny tekst źródłaChengliang, Li, Deng Xiaoyun, Yin Zhiying i Duan Yuangang. "Thermal Aging Performance of Domestic Cast Austenitic Stainless Steels in Nuclear Power Plants". W Energy Materials 2014, 481–86. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-48765-6_57.
Pełny tekst źródłaChengliang, Li, Deng Xiaoyun, Yin Zhiying i Duan Yuangang. "Thermal Aging Performance of Domestic Cast Austenitic Stainless Steels in Nuclear Power Plants". W Energy Materials 2014, 481–86. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119027973.ch57.
Pełny tekst źródłaYang, Yong, Yiren Chen, Yina Huang, Todd Allen i Appajosula Rao. "Irradiation Microstructure of Austenitic Steels and Cast Steels Irradiated in the BOR-60 Reactor at 320°C". W Proceedings of the 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems — Water Reactors, 2137–49. Cham: Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-319-48760-1_128.
Pełny tekst źródłaStreszczenia konferencji na temat "Austenitic cast steel"
Liu, Yi, Devin Hess, Qigui Wang i Jason Coryell. "Thermomechanical Fatigue Behavior of a Cast Austenitic Stainless Steel". W WCX SAE World Congress Experience. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2024. http://dx.doi.org/10.4271/2024-01-2683.
Pełny tekst źródłaMaziasz, Philip J., i Bruce A. Pint. "High Temperature Performance of Cast CF8C-Plus Austenitic Stainless Steel". W ASME Turbo Expo 2010: Power for Land, Sea, and Air. ASMEDC, 2010. http://dx.doi.org/10.1115/gt2010-23006.
Pełny tekst źródłaSakamoto, Kazunobu, Takashi Furukawa, Ichiro Komura, Yoshinori Kamiyama i Tsuyoshi Mihara. "Research on Ultrasonic Inspection of Cast Austenitic Stainless Steel Piping". W ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78051.
Pełny tekst źródłaQian, Haiyang, David Harris i Timothy J. Griesbach. "Probabilistic Models of Reliability of Cast Austenitic Stainless Steel Piping". W ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57270.
Pełny tekst źródłaQian, Haiyang, David Harris i Timothy J. Griesbach. "Probabilistic Models of Reliability of Cast Austenitic Stainless Steel Piping". W ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78710.
Pełny tekst źródłaDunlap, M. D., G. D. Connolly i J. Dobson. "Modeling and Simulation of Cast Austenitic Stainless Steel with OnScale". W 2020 IEEE International Ultrasonics Symposium (IUS). IEEE, 2020. http://dx.doi.org/10.1109/ius46767.2020.9251616.
Pełny tekst źródłaNeyhouse, Jeffrey R., Jose M. Aurrecoechea, J. Preston Montague i John D. Lilley. "Cast Iron-Nickel Alloy for Industrial Gas Turbine Engine Applications". W ASME Turbo Expo 2005: Power for Land, Sea, and Air. ASMEDC, 2005. http://dx.doi.org/10.1115/gt2005-68837.
Pełny tekst źródłaShim, D. J., N. G. Cofie, D. Dedhia, D. O. Harris, T. J. Griesbach i K. Amberge. "Technical Basis for Flaw Acceptance Criteria for Cast Austenitic Stainless Steel Piping". W ASME 2017 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/pvp2017-66100.
Pełny tekst źródłaMaziasz, Philip J., John P. Shingledecker, Neal D. Evans i Michael J. Pollard. "Developing New Cast Austenitic Stainless Steels With Improved High-Temperature Creep Resistance". W ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/creep2007-26840.
Pełny tekst źródłaUddin, M. F., R. E. Kurth, C. Sallaberry, G. M. Wilkowski, F. W. Brust i D. Rudland. "Critical Flaw Evaluation of Cast Austenitic Stainless Steel: Deterministic and Probabilistic Fracture Analyses". W ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63850.
Pełny tekst źródłaRaporty organizacyjne na temat "Austenitic cast steel"
Crawford, Susan, Matthew Prowant, Anthony Cinson, Michael Larche, Aaron Diaz i Michael Anderson. Phased Array Ultrasonic Sound Field Mapping in Cast Austenitic Stainless Steel. Office of Scientific and Technical Information (OSTI), maj 2014. http://dx.doi.org/10.2172/1136237.
Pełny tekst źródłaRamuhalli, Pradeep, Morris S. Good, Aaron A. Diaz, Michael T. Anderson, Bruce E. Watson, Timothy J. Peters, Mukul Dixit i Leonard J. Bond. Ultrasonic Characterization of Cast Austenitic Stainless Steel Microstructure: Discrimination between Equiaxed- and Columnar-Grain Material ? An Interim Study. Office of Scientific and Technical Information (OSTI), październik 2009. http://dx.doi.org/10.2172/967235.
Pełny tekst źródłaChopra, Omesh K. Effects of Thermal Aging and Neutron Irradiation on Crack Growth Rate and Fracture Toughness of Cast Stainless Steels and Austenitic Stainless Steel Welds. Office of Scientific and Technical Information (OSTI), październik 2014. http://dx.doi.org/10.2172/1178101.
Pełny tekst źródłaCrawford, Susan L., Anthony D. Cinson, Traci L. Moran, Michael T. Anderson i Aaron A. Diaz. Improvements in 500-kHz Ultrasonic Phased-Array Probe Designs for Evaluation of Thick Section Cast Austenitic Stainless Steel Piping Welds. Office of Scientific and Technical Information (OSTI), luty 2011. http://dx.doi.org/10.2172/1012296.
Pełny tekst źródłaDiaz, Aaron A., Kayte M. Denslow, Anthony D. Cinson, Marino Morra, Susan L. Crawford, Matthew S. Prowant, Stephen E. Cumblidge i Michael T. Anderson. Technical Letter Report Assessment of Ultrasonic Phased Array Testing for Cast Austenitic Stainless Steel Pressurizer Surge Line Piping Welds and Thick Section Primary System Cast Piping Welds JCN N6398, Task 2A. Office of Scientific and Technical Information (OSTI), lipiec 2008. http://dx.doi.org/10.2172/1023212.
Pełny tekst źródłaDiaz, Aaron A., Anthony D. Cinson, Susan L. Crawford, Royce Mathews, Traci L. Moran i Michael T. Anderson. Technical Letter Report Assessment of Ultrasonic Phased Array Inspection Method for Welds in Cast Austenitic Stainless Steel Pressurizer Surge Line Piping JCN N6398, Task 1B. Office of Scientific and Technical Information (OSTI), lipiec 2009. http://dx.doi.org/10.2172/992378.
Pełny tekst źródłaMaziasz, P. J., J. P. Shingledecker, N. D. Evans i M. J. Pollard. Advanced Cast Austenitic Stainless Steels for High Temperature Components. Office of Scientific and Technical Information (OSTI), październik 2008. http://dx.doi.org/10.2172/944971.
Pełny tekst źródłaMuralidharan, G., V. K. Sikka i R. I. Pankiw. Development of Stronger and More Reliable Cast Austenitic Stainless Steels (H-Series) Based on Scientific Design Methodology. Office of Scientific and Technical Information (OSTI), kwiecień 2006. http://dx.doi.org/10.2172/940294.
Pełny tekst źródłaPankiw, Roman I., G. Muralidharan i Vinod K. Sikka. Development of Stronger and More Reliable Cast Austenitic Stainless Steels (H-Series) Based on Scientific and Design Methodology. Office of Scientific and Technical Information (OSTI), czerwiec 2006. http://dx.doi.org/10.2172/886136.
Pełny tekst źródła