Gotowa bibliografia na temat „Augmented Metrology”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Augmented Metrology”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Augmented Metrology"
Poon, Ting-Chung, Yaping Zhang, Liangcai Cao i Hiroshi Yoshikawa. "Editorial on Special Issue “Holography, 3-D Imaging and 3-D Display”". Applied Sciences 10, nr 20 (11.10.2020): 7057. http://dx.doi.org/10.3390/app10207057.
Pełny tekst źródłaSiv, Julie, Rafael Mayer, Guillaume Beaugrand, Guillaume Tison, Rémy Juvénal i Guillaume Dovillaire. "Testing and characterization of challenging optics and optical systems with Shack Hartmann wavefront sensors". EPJ Web of Conferences 215 (2019): 06003. http://dx.doi.org/10.1051/epjconf/201921506003.
Pełny tekst źródłaNawab, Rahma, i Angela Davies Allen. "Low-Cost AR-Based Dimensional Metrology for Assembly". Machines 10, nr 4 (30.03.2022): 243. http://dx.doi.org/10.3390/machines10040243.
Pełny tekst źródłaKerst, Thomas, Mohammad Bitarafan, Laura Jokinen, Ilkka Alasaarela, Seppo Tillanen, David Zautasvili i Nikhil Pachhandara. "82‐3: Rapid AR/VR Device Eye‐Box Measurement Using a Wide‐FOV Lens". SID Symposium Digest of Technical Papers 54, nr 1 (czerwiec 2023): 1155–57. http://dx.doi.org/10.1002/sdtp.16779.
Pełny tekst źródłaArpaia, Pasquale, Egidio De Benedetto, Concetta Anna Dodaro, Luigi Duraccio i Giuseppe Servillo. "Metrology-Based Design of a Wearable Augmented Reality System for Monitoring Patient’s Vitals in Real Time". IEEE Sensors Journal 21, nr 9 (1.05.2021): 11176–83. http://dx.doi.org/10.1109/jsen.2021.3059636.
Pełny tekst źródłaGonçalves, GL, JU Delgado i FB Razuck. "The use of Augmented Reality for the teaching of dosimetry and metrology of ionizing radiation at IRD". Journal of Physics: Conference Series 1826, nr 1 (1.03.2021): 012041. http://dx.doi.org/10.1088/1742-6596/1826/1/012041.
Pełny tekst źródłaHo, P. T., J. A. Albajez, J. A. Yagüe i J. Santolaria. "Preliminary study of Augmented Reality based manufacturing for further integration of Quality Control 4.0 supported by metrology". IOP Conference Series: Materials Science and Engineering 1193, nr 1 (1.10.2021): 012105. http://dx.doi.org/10.1088/1757-899x/1193/1/012105.
Pełny tekst źródłaZhao, Lei, i Chaohao Wang. "50.2: Invited Paper: A Closer Look: Advancements in Near‐Eye Display Testing and Metrology". SID Symposium Digest of Technical Papers 54, S1 (kwiecień 2023): 354–60. http://dx.doi.org/10.1002/sdtp.16303.
Pełny tekst źródłaPrusakov, A. N., V. V. Popadyev i V. F. Pankin. "The Working Week of the International Federation of Surveyors under the motto “From digitalization to augmented reality”". Geodesy and Cartography 926, nr 8 (20.09.2017): 25–38. http://dx.doi.org/10.22389/0016-7126-2017-926-8-25-38.
Pełny tekst źródłaĆirić, Ivan, Milan Banić, Miloš Simonović, Aleksandar Miltenović, Dušan Stamenković i Vlastimir Nikolić. "TOWARDS MACHINE VISION BASED RAILWAY ASSETS PREDICTIVE MAINTENANCE". Facta Universitatis, Series: Automatic Control and Robotics 19, nr 2 (8.12.2020): 125. http://dx.doi.org/10.22190/fuacr2002125c.
Pełny tekst źródłaRozprawy doktorskie na temat "Augmented Metrology"
Bourguignon, Thibaut. "Implémentation et évaluation de la mesure Overlay in-situ par microscopie électronique pour la production de puces électroniques". Electronic Thesis or Diss., Université Grenoble Alpes, 2024. http://www.theses.fr/2024GRALT001.
Pełny tekst źródłaIntegrated circuits are manufactured via a stack of various layers. The precise alignment of these layers, known as "overlay" (OVL), is critical to chip reliability. The specifications are very strict: on a 300mm-diameter wafer, each pattern must be aligned to within a few nanometres. Current methods, based on optical observation of dedicated test patterns, show their limitations in terms of representativeness and assessment of local variability.This thesis proposes an innovative approach, using scanning electron microscopy (SEM), to accurately measure these local variations and to understand the biases induced by the test patterns. To this end, an algorithm for measuring the overlay from SEM contours has been developed. By registering reference contours on the extracted contours, the overlay is measured directly on the product, without the need for a specific test pattern, even in the presence of partially masked levels.Following the evaluation of this method on synthetic images, its application to production wafers enabled us to quantify the local variability of the overlay on the product, highlighting deviations from on-line measurements, while revealing the limits of SEM-OVL metrology
Streszczenia konferencji na temat "Augmented Metrology"
Schmid, Stephan, i Dieter Fritsch. "Precision analysis of triangulations using forward-facing vehicle-mounted cameras for augmented reality applications". W SPIE Optical Metrology, redaktorzy Fabio Remondino i Mark R. Shortis. SPIE, 2017. http://dx.doi.org/10.1117/12.2269716.
Pełny tekst źródłaMigukin, Artem, Vladimir Katkovnik i Jaakko Astola. "Optimal phase retrieval from multiple observations with Gaussian noise: augmented Lagrangian algorithm for phase objects". W SPIE Optical Metrology, redaktorzy Peter H. Lehmann, Wolfgang Osten i Kay Gastinger. SPIE, 2011. http://dx.doi.org/10.1117/12.889118.
Pełny tekst źródłaGaglione, S., A. Angrisano, G. Castaldo, C. Gioia, A. Innac, L. Perrotta, G. Del Core i S. Troisi. "GPS/Barometer augmented navigation system: Integration and integrity monitoring". W 2015 IEEE Metrology for Aerospace (MetroAeroSpace). IEEE, 2015. http://dx.doi.org/10.1109/metroaerospace.2015.7180647.
Pełny tekst źródłaWinters, Daniel, Masashi Mitsui, Masamichi Ueda, Sven Sassning, Mohit Yadav, Patrik Langehanenberg i Jan-Hinrich Eggers. "High-precision 3D metrology for stacked diffractive augmented reality waveguides". W Optifab 2023, redaktorzy Jessica DeGroote Nelson i Blair L. Unger. SPIE, 2023. http://dx.doi.org/10.1117/12.2688509.
Pełny tekst źródłaPlopski, Alexander, Varunyu Fuvattanasilp, Jarkko Poldi, Takafumi Taketomi, Christian Sandor i Hirokazu Kato. "Efficient In-Situ Creation of Augmented Reality Tutorials". W 2018 Workshop on Metrology for Industry 4.0 and IoT. IEEE, 2018. http://dx.doi.org/10.1109/metroi4.2018.8428320.
Pełny tekst źródłaHua, Hong. "Lightweight, Low-cost Augmented Reality Displays Enabled by Freeform Optical Technology". W Applied Industrial Optics: Spectroscopy, Imaging and Metrology. Washington, D.C.: OSA, 2013. http://dx.doi.org/10.1364/aio.2013.aw1b.4.
Pełny tekst źródłaNotaros, Jelena, Milica Notaros, Manan Raval, Christopher V. Poulton, Matthew J. Byrd, Nanxi Li, Zhan Su i in. "Integrated Optical Phased Arrays for LiDAR, Communications, Augmented Reality, and Beyond". W Applied Industrial Optics: Spectroscopy, Imaging and Metrology. Washington, D.C.: OSA, 2021. http://dx.doi.org/10.1364/aio.2021.m2a.3.
Pełny tekst źródłaMacmahon, Nelson Sosa, Juan Manuel Ramírez Cortés i Leopoldo Altamirano Robles. "Simulator in Augmented Reality Environment for Natural Interaction for Assembling Electrical Equipment". W Applied Industrial Optics: Spectroscopy, Imaging and Metrology. Washington, D.C.: OSA, 2012. http://dx.doi.org/10.1364/aio.2012.jtu5a.22.
Pełny tekst źródłaKellogg, James, Kathleen Andrea-Liner, Jennifer Jennings, Steven Timms, Robert C. Keramidas, Johnnie Berry, Tony DeLaCruz i in. "Augmented reality assisted astronaut operations in space to upgrade the cold atom lab instrument". W Quantum Sensing, Imaging, and Precision Metrology, redaktorzy Selim M. Shahriar i Jacob Scheuer. SPIE, 2023. http://dx.doi.org/10.1117/12.2650750.
Pełny tekst źródłaNeagu, Carina Sonia, Andreea Codruta Cojocariu, Cristian Zaharia, Mihai Rominu, Meda-Lavinia Negrutiu, Virgil-Florin Duma i Cosmin Sinescu. "The evaluation of dental adhesives augmented with magnetic nanoparticles". W Advances in 3OM: Opto-Mechatronics, Opto-Mechanics, and Optical Metrology, redaktorzy Jannick P. Rolland, Virgil-Florin Duma i Adrian G. H. Podoleanu. SPIE, 2022. http://dx.doi.org/10.1117/12.2613382.
Pełny tekst źródła